| Age | Commit message (Collapse) | Author |
|---|
|
A good deal of the structures we map into here aren't accessed very often
at all, and Fedora 26 has exposed an issue where after creating a heap of
channels, BAR2 space would run out, and we'd need to make use of the slow
path while accessing important structures like page tables.
This implements an LRU on BAR2 space, which allows eviction of mappings
that aren't currently needed, to make space for other objects.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Another piece of solving the "GP100 BAR2 VMM bootstrap" puzzle.
Without doing this, we'd attempt to write PDEs for the lower page table
levels through BAR2 before BAR2 access has been fully initialised.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
This is not as simple as it was for earlier GPUs, due to the need to swap
accessor functions depending on whether BAR2 is usable or not.
We were previously protected by nvkm_instobj's accessor functions keeping
an object mapped permanently, with some unclear magic that managed to hit
the slow-path where needed even if an object was marked as mapped.
That's been replaced here by reference counting maps (some objects, like
page tables can be accessed concurrently), and swapping the functions as
necessary.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
This is to simplify upcoming changes. The slow-path is something that
currently occurs during bootstrap of the BAR2 VMM, while backing up an
object during suspend/resume, or when BAR2 address space runs out.
The latter is a real problem that can happen at runtime, and occurs in
Fedora 26 already (due to some change that causes a lot of channels to
be created at login), so ideally we'd prefer not to make it any slower.
We'd also like suspend/resume speed to not suffer.
Upcoming commits will solve those problems in a better way, making the
extra overhead of moving the locking here a non-issue.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
acquire()/boot() will need different logic in addition to performing
the actual mapping.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
This will eliminate a step through the call chain, and give backends
more flexibility.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
The accessor functions can change as a result of acquire()/release() calls,
and are protected by any refcounting done there.
Other functions must remain constant, as they can be called any time.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Discovered by accident while working to use BAR2 access to instmem objects
on more paths.
We've apparently been relying on luck up until now!
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
If we initialise BAR2 earlier, we're able to complete BAR1 setup using
the instmem fast-path.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
GP100's page table nests a lot more deeply than the GF100-compatible
layout we're currently using, which means our hackish-but-simple way
of dealing with BAR2 VMM teardown won't work anymore.
In order to sanely handle the chicken-and-egg (BAR2's PTs get mapped
into themselves) problem, we need prevent page tables getting mapped
back into BAR2 during the destruction of its VMM.
To do this, we simply key off the state that's now maintained by the
BAR2 init/fini functions.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Match API with the BAR1 version.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Upcoming changes will remove the nvkm_vmm pointer from nvkm_vma, instead
requiring it to be explicitly specified on each operation.
It's not currently possible to get this information for BAR1 mappings,
so let's fix that ahead of time.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Will prevent spurious MMU fault interrupts if something decides to touch
BAR1 after we've unloaded the driver.
Exposed external to BAR so that INSTMEM can use it to better control the
suspend/resume fast-path access.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
If we want to be able to hit the instmem fast-path in a few trickier cases,
we need to be more flexible with when we can initialise BAR2 access.
There's probably a decent case to be made for merging BAR/INSTMEM into BUS,
but that's something to ponder another day.
Flushes have been added after the write to bind the instance block,
as later commits will reveal the need for them.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Will prevent spurious MMU fault interrupts if something decides to touch
BAR1 after we've unloaded the driver.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
BAR2 being done for practical reasons, this is just for consistency.
Flushes have been added after the write to bind the instance block,
as later commits will reveal the need for them.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
NVIDIA call it BAR2, Linux APIs treat it as BAR3 due to BAR1 being a
64-bit BAR, which I presume take two slots or something.
No actual code changes here, just to make future commits less messy.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
It's handled by FIFO preinit() now.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Will already be done by MMU as a result of the PT writes that occur
during BAR2 bootstrapping.
This is likely just a left-over from the days when it was hardcoded.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Using the ARRAY_SIZE macro improves the readability of the code. Also,
it is useless to re-invent it.
Found with Coccinelle with the following semantic patch:
@r depends on (org || report)@
type T;
T[] E;
position p;
@@
(
(sizeof(E)@p /sizeof(*E))
|
(sizeof(E)@p /sizeof(E[...]))
|
(sizeof(E)@p /sizeof(T))
)
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Reported-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
v2:
- add nv138 and drop nv13b chipsets (Ilia Mirkin)
- refactor out status variable and instead mask tsensor (Ilia Mirkin)
- switch SHADOWed state message away from nvkm_error() (Ilia Mirkin)
- rename internal temperature variable (Karol Herbst)
v3:
- use nvkm_trace() for SHADOWed state message (Ben Skeggs)
Signed-off-by: Rhys Kidd <rhyskidd@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Even though we've zeroed the PDE, the GPU may have cached the PD, so we
need to flush when deleting them.
Noticed while working on replacement MMU code, but a backport might be a
good idea, so let's fix it in the current code too.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
|
|
... and __initconst if applicable.
Based on similar work for an older kernel in the Grsecurity patch.
[JD: fix toshiba-wmi build]
[JD: add htcpen]
[JD: move __initconst where checkscript wants it]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
|
|
It appears that MSI does not work on either G5 PPC nor on a E5500-based
platform, where other hardware is reported to work fine with MSI.
Both tests were conducted with NV4x hardware, so perhaps other (or even
this) hardware can be made to work. It's still possible to force-enable
with config=NvMSI=1 on load.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
These are used for accesses to sparse mappings, and we want reads of
such mappings to return 0.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Useful for testing, and for the userspace build where we can't kick
a framebuffer driver off the device.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
GT215, GF100-GP100, and GP10x are all different.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
The NV_PMC_ENABLE bit for PMU did not appear until GF100, and some other
unknown register needs to be poked instead.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
An upcoming commit will replace direct NV_PMC register bashing from PMU
with a call to the proper function.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
This allows temperature readouts on maxwell2 GPUs.
Signed-off-by: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Array thresolds should be named thresholds, rename it. Also make it static
static const char * const
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Bit 30 being set causes the upper half of BAR2 to stay in physical mode,
mapped over the end of VRAM, even when the rest of the BAR has been set
to virtual mode.
We inherited our initial value from RM, but I'm not aware of any reason
we need to keep it that way.
This fixes severe GPU hang/lockup issues revealed by Wayland on F26.
Shout-out to NVIDIA for the quick response with the potential cause!
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org # 4.3+
|
|
Since switching the I2C-over-AUX helpers, there have been regressions on
some display combinations due to us not having support for "address only"
transactions.
This commits enables support for them for GF119 and newer.
Earlier GPUs have been reverted to a custom I2C-over-AUX algorithm.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Pull drm updates from Dave Airlie:
"This is the main pull request for the drm, I think I've got one later
driver pull for mediatek SoC driver, I'm undecided on if it needs to
go to you yet.
Otherwise summary below:
Core drm:
- Atomic add driver private objects
- Deprecate preclose hook in modern drivers
- MST bandwidth tracking
- Use kvmalloc in more places
- Add mode_valid hook for crtc/encoder/bridge
- Reduce sync_file construction time
- Documentation updates
- New DRM synchronisation object support
New drivers:
- pl111 - pl111 CLCD display controller
Panel:
- Innolux P079ZCA panel driver
- Add NL12880B20-05, NL192108AC18-02D, P320HVN03 panels
- panel-samsung-s6e3ha2: Add s6e3hf2 panel support
i915:
- SKL+ watermark fixes
- G4x/G33 reset improvements
- DP AUX backlight improvements
- Buffer based GuC/host communication
- New getparam for (sub)slice infomation
- Cannonlake and Coffeelake initial patches
- Execbuf optimisations
radeon/amdgpu:
- Lots of Vega10 bug fixes
- Preliminary raven support
- KIQ support for compute rings
- MEC queue management rework
- DCE6 Audio support
- SR-IOV improvements
- Better radeon/amdgpu selection support
nouveau:
- HDMI stereoscopic support
- Display code rework for >= GM20x GPUs
msm:
- GEM rework for fine-grained locking
- Per-process pagetable work
- HDMI fixes for Snapdragon 820.
vc4:
- Remove 256MB CMA limit from vc4
- Add out-fence support
- Add support for cygnus
- Get/set tiling ioctls support
- Add T-format tiling support for scanout
zte:
- add VGA support.
etnaviv:
- Thermal throttle support for newer GPUs
- Restore userspace buffer cache performance
- dma-buf sync fix
stm:
- add stm32f429 display support
exynos:
- Rework vblank handling
- Fixup sw-trigger code
sun4i:
- V3s display engine support
- HDMI support for older SoCs
- Preliminary work on dual-pipeline SoCs.
rcar-du:
- VSP work
imx-drm:
- Remove counter load enable from PRE
- Double read/write reduction flag support
tegra:
- Documentation for the host1x and drm driver.
- Lots of staging ioctl fixes due to grate project work.
omapdrm:
- dma-buf fence support
- TILER rotation fixes"
* tag 'drm-for-v4.13' of git://people.freedesktop.org/~airlied/linux: (1270 commits)
drm: Remove unused drm_file parameter to drm_syncobj_replace_fence()
drm/amd/powerplay: fix bug fail to remove sysfs when rmmod amdgpu.
amdgpu: Set cik/si_support to 1 by default if radeon isn't built
drm/amdgpu/gfx9: fix driver reload with KIQ
drm/amdgpu/gfx8: fix driver reload with KIQ
drm/amdgpu: Don't call amd_powerplay_destroy() if we don't have powerplay
drm/ttm: Fix use-after-free in ttm_bo_clean_mm
drm/amd/amdgpu: move get memory type function from early init to sw init
drm/amdgpu/cgs: always set reference clock in mode_info
drm/amdgpu: fix vblank_time when displays are off
drm/amd/powerplay: power value format change for Vega10
drm/amdgpu/gfx9: support the amdgpu.disable_cu option
drm/amd/powerplay: change PPSMC_MSG_GetCurrPkgPwr for Vega10
drm/amdgpu: Make amdgpu_cs_parser_init static (v2)
drm/amdgpu/cs: fix a typo in a comment
drm/amdgpu: Fix the exported always on CU bitmap
drm/amdgpu/gfx9: gfx_v9_0_enable_gfx_static_mg_power_gating() can be static
drm/amdgpu/psp: upper_32_bits/lower_32_bits for address setup
drm/amd/powerplay/cz: print message if smc message fails
drm/amdgpu: fix typo in amdgpu_debugfs_test_ib_init
...
|
|
Pull uuid subsystem from Christoph Hellwig:
"This is the new uuid subsystem, in which Amir, Andy and I have started
consolidating our uuid/guid helpers and improving the types used for
them. Note that various other subsystems have pulled in this tree, so
I'd like it to go in early.
UUID/GUID summary:
- introduce the new uuid_t/guid_t types that are going to replace the
somewhat confusing uuid_be/uuid_le types and make the terminology
fit the various specs, as well as the userspace libuuid library.
(me, based on a previous version from Amir)
- consolidated generic uuid/guid helper functions lifted from XFS and
libnvdimm (Amir and me)
- conversions to the new types and helpers (Amir, Andy and me)"
* tag 'uuid-for-4.13' of git://git.infradead.org/users/hch/uuid: (34 commits)
ACPI: hns_dsaf_acpi_dsm_guid can be static
mmc: sdhci-pci: make guid intel_dsm_guid static
uuid: Take const on input of uuid_is_null() and guid_is_null()
thermal: int340x_thermal: fix compile after the UUID API switch
thermal: int340x_thermal: Switch to use new generic UUID API
acpi: always include uuid.h
ACPI: Switch to use generic guid_t in acpi_evaluate_dsm()
ACPI / extlog: Switch to use new generic UUID API
ACPI / bus: Switch to use new generic UUID API
ACPI / APEI: Switch to use new generic UUID API
acpi, nfit: Switch to use new generic UUID API
MAINTAINERS: add uuid entry
tmpfs: generate random sb->s_uuid
scsi_debug: switch to uuid_t
nvme: switch to uuid_t
sysctl: switch to use uuid_t
partitions/ldm: switch to use uuid_t
overlayfs: use uuid_t instead of uuid_be
fs: switch ->s_uuid to uuid_t
ima/policy: switch to use uuid_t
...
|
|
This makes use of all the additional routing and state added in previous
commits, making it possible to deal with GM20x macro link routing, while
also sharing code between the NV50 and GF119 implementations.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
As of DCB 4.1, these are not the same thing.
Compatibility temporarily in place until callers have been updated.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
No (known) case yet, but other tables have been moving beyond 16-bits,
so we may as well be prepared.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Compatibility temporarily in place until all callers have been updated.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
We already have a subdev pointer, from which we can locate the device's
BIOS subdev. No need for a separate pointer.
Structure/callers not updated yet, as I want to batch more changes and
only touch the callers once.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
