summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/panel
AgeCommit message (Collapse)Author
2023-01-26drm: panel: Enable prepare_prev_first flag for samsung-s6e panelsJagan Teki
Enable the drm panel prepare_prev_first flag so-that the previous controller should be prepared first before the prepare for the panel is called. samsung-s6e3ha2, samsung-s6e63j0x03 and samsung-s6e8aa0 are the effected samsung-s6e panels for this change. This makes sure that the previous controller, likely to be a DSI host controller should be initialized to LP-11 before the panel is powered up. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2023-01-22drm/panel: Add driver for the AUO A030JTN01 TFT LCDChristophe Branchereau
Add driver for the AUO A030JTN01 panel, which is a 320x480 3.0" 4:3 24-bit TFT LCD panel with non-square pixels and a delta-RGB 8-bit interface. Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230121162419.284523-3-cbranchereau@gmail.com
2023-01-20drm: exynos: dsi: Fix MIPI_DSI*_NO_* mode flagsJagan Teki
HFP/HBP/HSA/EOT_PACKET modes in Exynos DSI host specifies 0 = Enable and 1 = Disable. The logic for checking these mode flags was correct before the MIPI_DSI*_NO_* mode flag conversion. This patch is trying to fix this MIPI_DSI*_NO_* mode flags handling Exynos DSI host and update the mode_flags in relevant panel drivers. Fixes: 0f3b68b66a6d ("drm/dsi: Add _NO_ to MIPI_DSI_* flags disabling features") Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Reported-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Marek Vasut <marex@denx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20221212145745.15387-1-jagan@amarulasolutions.com
2023-01-19drm/panel: vtdr6130: fix unused ret in visionox_vtdr6130_bl_update_statusNeil Armstrong
Fix the following warning: panel-visionox-vtdr6130.c:249:12: warning: 'ret' is used uninitialized [-Wuninitialized] Fixes: 9402cde9347e ("drm/panel: vtdr6130: Use 16-bit brightness function") Reported-by: Daniel Vetter <daniel@ffwll.ch> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230119-topic-sm8550-vtdr6130-fixup-v1-1-82c4fb008138@linaro.org
2023-01-19drm/panel: vtdr6130: Use 16-bit brightness functionRichard Acayan
This panel communicates brightness in big endian. This is not a quirk of the panels themselves, but rather, a part of the MIPI standard. Use the new mipi_dsi_dcs_set_display_brightness_large() function that properly handles 16-bit brightness instead of bypassing the brightness functions entirely. Signed-off-by: Richard Acayan <mailingradian@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-MTP Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230116224909.23884-4-mailingradian@gmail.com
2023-01-19drm/panel: sofef00: Use 16-bit brightness functionRichard Acayan
These panels communicate brightness in big endian. This is not a quirk of the panels themselves, but rather, a part of the MIPI standard. Use the new mipi_dsi_dcs_set_display_brightness_large() function that properly handles 16-bit brightness instead of doing special processing of the brightness values. Signed-off-by: Richard Acayan <mailingradian@gmail.com> Tested-by: Caleb Connolly <caleb@connolly.tech> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230116224909.23884-3-mailingradian@gmail.com
2023-01-17drm: panel: visionox: add backlight dependencyArnd Bergmann
The newly added driver uses the backlight subsystem but is missing the corresponding Kconfig dependency: arm-linux-gnueabi-ld: drivers/gpu/drm/panel/panel-visionox-vtdr6130.o: in function `visionox_vtdr6130_probe': panel-visionox-vtdr6130.c:(.text+0xdee): undefined reference to `devm_backlight_device_register' Fixes: 65dc9360f741 ("drm: panel: Add Himax HX8394 panel controller driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230117165522.2104380-1-arnd@kernel.org
2023-01-13drm/panel: Do not include <linux/fb.h>Thomas Zimmermann
Remove unnecessary include statements for <linux/fb.h>. No functional changes. Include <linux/of.h> where the driver got the header file via <linux/fb.h>. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20230111130206.29974-6-tzimmermann@suse.de
2023-01-13drm: Include <linux/of.h> where neededThomas Zimmermann
Include <linux/of.h> in source files that need it. Some of DRM's source code gets OF header via drm_crtc_helper.h and <linux/fb.h>, which can leed to unnecessary recompilation. In drm_modes.c, add a comment on the reason for still including <linux/fb.h>. The header file is required to get KHZ2PICOS(). The macro is part of the UAPI headers, so it cannot be moved to a less prominent location. v2: * include <linux/of.h> in komeda_drv.c (kernel test robot) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Liviu Dudau <liviu.dudau@arm.com> # komeda Acked-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20230111130206.29974-3-tzimmermann@suse.de
2023-01-11drm/panel-xinpeng-xpp055c272: Drop custom DSI write macroJavier Martinez Canillas
There is a macro for this already in the <drm/drm_mipi_dsi.h> header, use that instead and delete the custom DSI write macro defined in the driver. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230107191822.3787147-14-javierm@redhat.com
2023-01-11drm/panel-sony-tulip-truly-nt35521: Drop custom DSI write macroJavier Martinez Canillas
There is a macro for this already in the <drm/drm_mipi_dsi.h> header, use that instead and delete the custom DSI write macro defined in the driver. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230107191822.3787147-13-javierm@redhat.com
2023-01-11drm/panel-mantix-mlaf057we51: Drop custom DSI write macroJavier Martinez Canillas
There is a macro for this already in the <drm/drm_mipi_dsi.h> header, use that instead and delete the custom DSI write macro defined in the driver. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Guido Günther <agx@sigxcpu.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230107191822.3787147-12-javierm@redhat.com
2023-01-11drm/panel-sharp-ls060t1sx01: Drop custom DSI write macroJavier Martinez Canillas
There is a macro for this already in the <drm/drm_mipi_dsi.h> header, use that instead and delete the custom DSI write macro defined in the driver. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230107191822.3787147-11-javierm@redhat.com
2023-01-11drm/panel-samsung-sofef00: Drop custom DSI write macroJavier Martinez Canillas
There is a macro for this already in the <drm/drm_mipi_dsi.h> header, use that instead and delete the custom DSI write macro defined in the driver. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230107191822.3787147-10-javierm@redhat.com
2023-01-11drm/panel-samsung-s6e88a0-ams452ef01: Drop custom DSI write macroJavier Martinez Canillas
There is a macro for this already in the <drm/drm_mipi_dsi.h> header, use that instead and delete the custom DSI write macro defined in the driver. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230107191822.3787147-9-javierm@redhat.com
2023-01-11drm/panel-jdi-fhd-r63452: Drop custom DSI write macrosJavier Martinez Canillas
There are macros for these already in the <drm/drm_mipi_dsi.h> header, use that instead and delete the custom DSI write macros defined in the driver. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230107191822.3787147-8-javierm@redhat.com
2023-01-11drm/panel-novatek-nt35950: Drop custom DSI write macroJavier Martinez Canillas
There is a macro for this already in the <drm/drm_mipi_dsi.h> header, use that instead and delete the custom DSI write macro defined in the driver. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230107191822.3787147-7-javierm@redhat.com
2023-01-11drm/panel-boe-bf060y8m-aj0: Drop custom DSI write macroJavier Martinez Canillas
There is a macro for this already in the <drm/drm_mipi_dsi.h> header, use that instead and delete the custom DSI write macro defined in the driver. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230107191822.3787147-6-javierm@redhat.com
2023-01-11drm/panel-elida-kd35t133: Drop custom DSI write macroJavier Martinez Canillas
There is a macro for this already in the <drm/drm_mipi_dsi.h> header, use that instead and delete the custom DSI write macro defined in the driver. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230107191822.3787147-5-javierm@redhat.com
2023-01-11drm/panel-leadtek-ltk050h3146w: Drop custom DSI write macroJavier Martinez Canillas
There is a macro for this already in the <drm/drm_mipi_dsi.h> header, use that instead and delete the custom DSI write macro defined in the driver. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230107191822.3787147-4-javierm@redhat.com
2023-01-11drm/panel-sitronix-st7703: Drop custom DSI write macrosJavier Martinez Canillas
There are macros for these already in the <drm/drm_mipi_dsi.h> header, use that instead and delete the custom DSI write macros defined in the driver. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Guido Günther <agx@sigxcpu.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230107191822.3787147-3-javierm@redhat.com
2023-01-11drm/panel-asus-z00t-tm5p5-n35596: Drop custom DSI write macrosJavier Martinez Canillas
There are macros for these already in the <drm/drm_mipi_dsi.h> header, use that instead and delete the custom DSI write macros defined in the driver. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230107191822.3787147-2-javierm@redhat.com
2023-01-10drm/panel-edp: add IVO M133NW4J panel entryAbel Vesa
Add an eDP panel entry for IVO M133NW4J. Due to lack of documentation, use the delay_200_500_p2e100 timings like some other IVO entries for now. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221231142721.338643-2-abel.vesa@linaro.org
2023-01-10drm/panel-edp: fix name for IVO product id 854bAbel Vesa
The actual name is R133NW4K-R0. Fixes: 0f9fa5f58c78 ("drm/panel-edp: add IVO M133NW4J-R3 panel entry") Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Steev Klimaszewski <steev@kali.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221231142721.338643-1-abel.vesa@linaro.org
2023-01-10drm: panel: Add Himax HX8394 panel controller driverKamil Trzciński
The driver is for panels based on the Himax HX8394 controller, such as the HannStar HSD060BHW4 720x1440 TFT LCD panel that uses a MIPI-DSI interface. Signed-off-by: Kamil Trzciński <ayufan@ayufan.eu> Co-developed-by: Ondrej Jirman <megi@xff.cz> Signed-off-by: Ondrej Jirman <megi@xff.cz> Co-developed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Tom Fitzhenry <tom@tom-fitzhenry.me.uk> Tested-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230102230733.3506624-3-javierm@redhat.com
2023-01-10drm/panel: raspberrypi-touchscreen: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221118224540.619276-44-uwe@kleine-koenig.org
2023-01-10drm/panel: olimex-lcd-olinuxino: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221118224540.619276-43-uwe@kleine-koenig.org
2023-01-09drm/panel: add visionox vtdr6130 DSI panel driverNeil Armstrong
Add support for the 1080x2400 Visionox VTDR6130 AMOLED DSI panel found on the Qualcomm SM8550 MTP board. By default the the panel is configured to work with DSI compressed streams, but can work in uncompressed video mode since 1080x2400 in RGB888 fits in the 4 DSI lanes bandwidth. While display compression is preferred for performance and power reasons, let's start with the uncompressed video mode support and add the DSC support later on. Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> [narmstrong: moved drm/display/ include file before drm/drm_] Link: https://patchwork.freedesktop.org/patch/msgid/20230103-topic-sm8550-upstream-vtdr6130-panel-v2-2-dd6200f47a76@linaro.org
2022-12-29drm/panel: add the orisetech ota5601aChristophe Branchereau
Add the orisetech ota5601a ic driver For now it only supports the focaltech gpt3 3" 640x480 ips panel found in the ylm rg300x handheld. Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221219195233.375637-2-cbranchereau@gmail.com
2022-12-05drm/mipi-dbi: Initialize default driver functions with macroThomas Zimmermann
Introduce DRM_MIPI_DBI_SIMPLE_DISPLAY_PIPE_FUNCS to initialize MIPI-DBI helpers to default values and convert drivers. The prepare_fb function set by some drivers is called implicitly by simple-kms helpers, so leave it out. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Tested-by: Javier Martinez Canillas <javierm@redhat.com> Tested-by: Noralf Trønnes <noralf@tronnes.org> # drm/tiny/mi0283qt Link: https://patchwork.freedesktop.org/patch/msgid/20221202125644.7917-5-tzimmermann@suse.de
2022-12-05drm/simple-kms: Remove drm_gem_simple_display_pipe_prepare_fb()Thomas Zimmermann
The helper drm_gem_simple_display_pipe_prepare_fb() is simple-KMS' default implementation for prepare_fb. Remove the call from drivers that set it explicitly. Then inline the helper into the only caller within simple-kms helpers. No functional changes. Simple-KMS drivers that implement the prepare_fb callback should call drm_gem_plane_helper_prepare_fb() directly. v2: * fix typo in commit message Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221202125644.7917-2-tzimmermann@suse.de
2022-11-29drm/panel-samsung-atna33xc20: Extend autosuspend delayDrew Davenport
Avoid the panel oscillating on and off during boot. In some cases it will be more than 1000ms between powering the panel to read the EDID early during boot, and enabling the panel for display. Extending the autosuspend delay avoids autosuspending during this interval. Signed-off-by: Drew Davenport <ddavenport@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221117133655.5.I96ce2a565ff893eddcbee70174c991179311a3ae@changeid
2022-11-29drm/panel-simple: Use ktime_get_boottime for delaysDrew Davenport
ktime_get_boottime continues while the device is suspended. This change ensures that the resume path will not be delayed if the power off delay has already been met while the device is suspended Signed-off-by: Drew Davenport <ddavenport@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221117133655.3.Iebd9f79aba0a62015fd2383fe6986c2d6fe12cfd@changeid
2022-11-29drm/panel-samsung-atna33xc20: Use ktime_get_boottime for delaysDrew Davenport
ktime_get_boottime continues while the device is suspended. This change ensures that the resume path will not be delayed if the power off delay has already been met while the device is suspended Signed-off-by: Drew Davenport <ddavenport@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221117133655.2.Iebd9f79aba0a62015fd2383fe6986c2d6fe12cfd@changeid
2022-11-29drm/panel-edp: Use ktime_get_boottime for delaysDrew Davenport
ktime_get is based on CLOCK_MONOTONIC which stops on suspend. On suspend, the time that the panel was powerd off is recorded with ktime_get, and on resume this time is compared to the current ktime_get time to determine if the driver should wait for the panel to power down completely before re-enabling it. Because we're using ktime_get, this delay doesn't account for the time that the device is suspended, during which the power down delay may have already elapsed. Change to use ktime_get_boottime throughout, which uses CLOCK_BOOTTIME which does not stop when suspended. This ensures that the resume path will not be delayed if the power off delay has already been met while the device is suspended. Signed-off-by: Drew Davenport <ddavenport@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221117133655.1.I51639dc112bbbe27259df6bdad56dbabd655d91a@changeid
2022-11-24Backmerge tag 'v6.1-rc6' into drm-nextDave Airlie
Linux 6.1-rc6 This is needed for drm-misc-next and tegra. Signed-off-by: Dave Airlie <airlied@redhat.com>
2022-11-14drm/panel: Add NewVision NV3051D MIPI-DSI LCD panelChris Morgan
Support NewVision NV3051D panels as found on the Anbernic RG353P and RG353V. The underlying LCD part number for the RG353x devices is unknown, so the device name and a fallback for the driver IC is used instead. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> [Fixed checkpatch moan about parens] Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221111203130.9615-4-macroalpha82@gmail.com
2022-11-10drm/panel: simple: set bpc field for logic technologies displaysAishwarya Kothari
In case bpc is not set for a panel it then throws a WARN(). Add bpc to the panels logictechno_lt170410_2whc and logictechno_lt161010_2nh. Fixes: 5728fe7fa539 ("drm/panel: simple: add display timings for logic technologies displays") Signed-off-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220831141622.39605-1-francesco.dolcini@toradex.com
2022-11-09drm: panel: Add Jadard JD9365DA-H3 DSI panelJagan Teki
Jadard JD9365DA-H3 is WXGA MIPI DSI panel and it support TFT dot matrix LCD with 800RGBx1280 dots at maximum. Add support for it. Cc: dri-devel@lists.freedesktop.org Signed-off-by: Jagan Teki <jagan@edgeble.ai> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221108173120.618312-4-jagan@edgeble.ai
2022-11-05drm/fb-helper: Move generic fbdev emulation into separate source fileThomas Zimmermann
Move the generic fbdev implementation into its own source and header file. Adapt drivers. No functional changes, but some of the internal helpers have been renamed to fit into the drm_fbdev_ naming scheme. v3: * rename drm_fbdev.{c,h} to drm_fbdev_generic.{c,h} * rebase onto vmwgfx changes * rebase onto xlnx changes * fix include statements in amdgpu Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-22-tzimmermann@suse.de
2022-11-05drm/panel-ili9341: Include <linux/backlight.h>Thomas Zimmermann
Include <linux/backlight.h> for devm_of_find_backlight(). Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-10-tzimmermann@suse.de
2022-11-01drm/panel/panel-sitronix-st7701: Remove panel on DSI attach failureMarek Vasut
In case mipi_dsi_attach() fails, call drm_panel_remove() to avoid memory leak. Fixes: 849b2e3ff969 ("drm/panel: Add Sitronix ST7701 panel driver") Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221014231106.468063-1-marex@denx.de
2022-11-01drm/panel/panel-sitronix-st7701: Clean up CMDnBKx selectionMarek Vasut
There are two command register files, CMD1 and CMD2, where only the CMD2 contains additional register sub-files BK0..3 . Pull the register file selection call into separate function instead of duplicating it all over the driver. The CMD2BK2 file is undocumented in datasheet, and is used for BIST. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221014231042.468033-1-marex@denx.de
2022-11-01drm/panel/panel-sitronix-st7701: Fix RTNI calculationMarek Vasut
The RTNI field is multiplied by 16 and incremented by 512 before being used as the minimum number of pixel clock per horizontal line, hence it is necessary to subtract those 512 bytes from htotal and then divide the result by 16 before writing the value into the RTNI field. Fix the calculation. Fixes: de2b4917843c ("drm/panel/panel-sitronix-st7701: Infer horizontal pixel count from TFT mode") Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221012221159.88397-1-marex@denx.de
2022-10-21drm/panel-edp: Add INX N116BGE-EA2 (HW: C4)Sean Hong
Add support for the INX - N116BGE-EA2 (HW: C4) panel. Signed-off-by: Sean Hong <sean.hong@quanta.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221021031024.2899082-1-sean.hong@quanta.corp-partner.google.com
2022-10-21drm/panel-edp: Add INX N116BGE-EA2 (HW: C2)Sean Hong
Add support for the INX - N116BGE-EA2 (HW: C2) panel. Signed-off-by: Sean Hong <sean.hong@quanta.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221021025801.2898500-1-sean.hong@quanta.corp-partner.google.com
2022-10-18Merge drm/drm-next into drm-misc-nextMaxime Ripard
Let's kick-off this release cycle. Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-10-05Merge tag 'drm-next-2022-10-05' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "Lots of stuff all over, some new AMD IP support and gang submit support. i915 has further DG2 and Meteorlake pieces, and a bunch of i915 display refactoring. msm has a shrinker rework. There are also a bunch of conversions to use kunit. This has two external pieces, some MEI changes needed for future Intel discrete GPUs. These should be acked by Greg. There is also a cross maintainer shared tree with some backlight rework from Hans in here. Core: - convert selftests to kunit - managed init for more objects - move to idr_init_base - rename fb and gem cma helpers to dma - hide unregistered connectors from getconnector ioctl - DSC passthrough aux support - backlight handling improvements - add dma_resv_assert_held to vmap/vunmap edid: - move luminance calculation to core fbdev: - fix aperture helper usage fourcc: - add more format helpers - add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx, DRM_FORMAT_Dxx - add packed AYUV8888, XYUV8888 - add some kunit tests ttm: - allow bos without backing store - rewrite placement to use intersect/compatible functions dma-buf: - docs update - improve signalling when debugging udmabuf: - fix failure path GPF dp: - drop dp/mst legacy code - atomic mst state support - audio infoframe packing panel: - Samsung LTL101AL01 - B120XAN01.0 - R140NWF5 RH - DMT028VGHMCMI-1A T - AUO B133UAN02.1 - IVO M133NW4J-R3 - Innolux N120ACA-EA1 amdgpu: - Gang submit support - Mode2 reset for RDNA2 - New IP support: DCN 3.1.4, 3.2 SMU 13.x NBIO 7.7 GC 11.x PSP 13.x SDMA 6.x GMC 11.x - DSC passthrough support - PSP fixes for TA support - vangogh GFXOFF stats - clang fixes - gang submit CS cleanup prep work - fix VRAM eviction issues amdkfd: - GC 10.3 IP ISA fixes - fix CRIU regression - CPU fault on COW mapping fixes i915: - align fw versioning with kernel practices - add display substruct to i915 private - add initial runtime info to driver info - split out HDCP and backlight registers - MEI XeHP SDV GSC support - add per-gt sysfs defaults - TLB invalidation improvements - Disable PCI BAR resize on 32-bit - GuC firmware updates and compat changes - GuC log timestamp translation - DG2 preemption workaround changes - DG2 improved HDMI pixel clocks support - PCI BAR sanity checks - Enable DC5 on DG2 - DG2 DMC fw bumped - ADL-S PCI ID added - Meteorlake enablement - Rename ggtt_view to gtt_view - host RPS fixes - release mmaps on rpm suspend on discrete - clocking and dpll refactoring - VBT definitions and parsing updates - SKL watermark code extracted to separate file - allow seamless M/N changes on eDP panels - BUG_ON removal and cleanups msm: - DPU: simplified VBIF configuration cleanup CTL interfaces - DSI: removed unused msm_display_dsc_config struct switch regulator calls to new API switched to PANEL_BRIDGE for direct attached panels - DSI_PHY: convert drivers to parent_hws - DP: cleanup pixel_rate handling - HDMI: turned hdmi-phy-8996 into OF clk provider - misc dt-bindings fixes - choose eDP as primary display if it's available - support getting interconnects from either the mdss or the mdp5/dpu device nodes - gem: Shrinker + LRU re-work: - adds a shared GEM LRU+shrinker helper and moves msm over to that - reduce lock contention between retire and submit by avoiding the need to acquire obj lock in retire path (and instead using resv seeing obj's busyness in the shrinker - fix reclaim vs submit issues - GEM fault injection for triggering userspace error paths - Map/unmap optimization - Improved robustness for a6xx GPU recovery virtio: - improve error and edge conditions handling - convert to use managed helpers - stop exposing LINEAR modifier mgag200: - split modeset handling per model udl: - suspend/disconnect handling improvements vc4: - rework HDMI power up - depend on PM - better unplugging support ast: - resolution handling improvements ingenic: - add JZ4760(B) support - avoid a modeset when sharpness property is unchanged - use the new PM ops it6505: - power seq and clock updates ssd130x: - regmap bulk write - use atomic helpers instead of simple helpers via: - rename via_drv to via_dri1, consolidate all code. radeon: - drop DP MST experimental support - delayed work flush fix - use time_after ti-sn65dsi86: - DP support mediatek: - MT8195 DP support - drop of_gpio header - remove unneeded result - small DP code improvements vkms: - RGB565, XRGB64 and ARGB64 support sun4i: - tv: convert to atomic rcar-du: - Synopsys DW HDMI bridge DT bindings update exynos: - use drm_display_info.is_hdmi - correct return of mixer_mode_valid and hdmi_mode_valid omap: - refcounting fix rockchip: - RK3568 support - RK3399 gamma support" * tag 'drm-next-2022-10-05' of git://anongit.freedesktop.org/drm/drm: (1374 commits) drm/amdkfd: Fix UBSAN shift-out-of-bounds warning drm/amdkfd: Track unified memory when switching xnack mode drm/amdgpu: Enable sram on vcn_4_0_2 drm/amdgpu: Enable VCN DPG for GC11_0_1 drm/msm: Fix build break with recent mm tree drm/panel: simple: Use dev_err_probe() to simplify code drm/panel: panel-edp: Use dev_err_probe() to simplify code drm/panel: simple: Add Multi-Inno Technology MI0800FT-9 dt-bindings: display: simple: Add Multi-Inno Technology MI0800FT-9 panel drm/amdgpu: correct the memcpy size for ip discovery firmware drm/amdgpu: Skip put_reset_domain if it doesn't exist drm/amdgpu: remove switch from amdgpu_gmc_noretry_set drm/amdgpu: Fix mc_umc_status used uninitialized warning drm/amd/display: Prevent OTG shutdown during PSR SU drm/amdgpu: add page retirement handling for CPU RAS drm/amdgpu: use RAS error address convert api in mca notifier drm/amdgpu: support to convert dedicated umc mca address drm/amdgpu: export umc error address convert interface drm/amdgpu: fix sdma v4 init microcode error drm/amd/display: fix array-bounds error in dc_stream_remove_writeback() ...
2022-10-03drm/panel: ws2401: Silent no spi_device_id warningWei Yongjun
Add spi_device_id entries to silent following SPI warning: SPI driver ws2401-panel has no spi_device_id for samsung,lms380kf01 Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220915163437.2519754-1-weiyongjun@huaweicloud.com
2022-10-03drm/panel: tpg110: Silent no spi_device_id warningWei Yongjun
Add spi_device_id entries to silent following SPI warning: SPI driver tpo-tpg110-panel has no spi_device_id for tpo,tpg110 Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220915163431.2519736-1-weiyongjun@huaweicloud.com
generated by cgit (git 2.34.1) at 2025-04-28 03:21:16 +0000