summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/panel
AgeCommit message (Collapse)Author
2024-02-13drm/panel: st7703: Add Panel Rotation SupportChris Morgan
Add support for panel rotation to ST7703 based devices. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240212184950.52210-5-macroalpha82@gmail.com
2024-02-13drm/panel: st7703: Add Powkiddy RGB10MAX3 Panel SupportChris Morgan
The Powkiddy RGB10MAX3 is a handheld device with a 5 inch 720x1280 display panel with a Sitronix ST7703 display controller. The panel is installed rotated 270 degrees. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240212184950.52210-3-macroalpha82@gmail.com
2024-02-07Merge drm/drm-next into drm-misc-nextThomas Zimmermann
Backmerging to update drm-misc-next to the state of v6.8-rc3. Also fixes a build problem with xe. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2024-02-07drm/panel: re-alphabetize the menu listRandy Dunlap
A few of the DRM_PANEL entries have become out of alphabetical order, so move them around a bit to restore alpha order. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Jessica Zhang <quic_jesszhan@quicinc.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: <dri-devel@lists.freedesktop.org> Cc: Aradhya Bhatia <a-bhatia1@ti.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240205062711.3513-1-rdunlap@infradead.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240205062711.3513-1-rdunlap@infradead.org
2024-02-07drm/panel: simple: push blanking limit on RK32FN48HRaphael Gallais-Pou
Push horizontal front porch and vertical back porch blanking limit. This allows to get a 60 fps sharp. Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240205-ltdc_mp13-v1-5-116d43ebba75@foss.st.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240205-ltdc_mp13-v1-5-116d43ebba75@foss.st.com
2024-02-07drm/panel: simple: fix flags on RK043FN48HRaphael Gallais-Pou
DISPLAY_FLAGS_SYNC_POSEDGE is missing in the flags on the default timings. When overriding the default mode with one described in the device tree, the mode does not get acked because of this missing flag. Moreover since the panel is driven by the positive edge it makes sense to add it here. Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://lore.kernel.org/r/20240205-ltdc_mp13-v1-4-072d24bf1b36@foss.st.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240205-ltdc_mp13-v1-4-072d24bf1b36@foss.st.com
2024-02-05drm/panel: visionox-r66451: Set prepare_prev_first flagJessica Zhang
The DSI host needs to be enabled for the panel to be initialized in prepare(). Ensure this happens by setting prepare_prev_first. Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240202-visionox-r66451-prev-first-v1-1-c267dc889284@quicinc.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240202-visionox-r66451-prev-first-v1-1-c267dc889284@quicinc.com
2024-02-05Merge tag 'drm-misc-next-2024-01-11' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v6.9: UAPI Changes: virtio: - add Venus capset defines Cross-subsystem Changes: Core Changes: - fix drm_fixp2int_ceil() - documentation fixes - clean ups - allow DRM_MM_DEBUG with DRM=m - build fixes for debugfs support - EDID cleanups - sched: error-handling fixes - ttm: add tests Driver Changes: bridge: - ite-6505: fix DP link-training bug - samsung-dsim: fix error checking in probe - tc358767: fix regmap usage efifb: - use copy of global screen_info state hisilicon: - fix EDID includes mgag200: - improve ioremap usage - convert to struct drm_edid nouveau: - disp: use kmemdup() - fix EDID includes - documentation fixes panel: - ltk050h3146w: error-handling fixes - panel-edp: support delay between power-on and enable; use put_sync in unprepare; support Mediatek MT8173 Chromebooks, BOE NV116WHM-N49 V8.0, BOE NV122WUM-N41, CSO MNC207QS1-1 plus DT bindings - panel-lvds: support EDT ETML0700Z9NDHA plus DT bindings - panel-novatek: FRIDA FRD400B25025-A-CTK plus DT bindings qaic: - fixes to BO handling - make use of DRM managed release - fix order of remove operations rockchip: - analogix_dp: get encoder port from DT - inno_hdmi: support HDMI for RK3128 - lvds: error-handling fixes simplefb: - fix logging ssd130x: - support SSD133x plus DT bindings tegra: - fix error handling tilcdc: - make use of DRM managed release v3d: - show memory stats in debugfs vc4: - fix error handling in plane prepare_fb - fix framebuffer test in plane helpers vesafb: - use copy of global screen_info state virtio: - cleanups vkms: - fix OOB access when programming the LUT - Kconfig improvements vmwgfx: - unmap surface before changing plane state - fix memory leak in error handling - documentation fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240111154902.GA8448@linux-uq9g
2024-02-02drm/panel: visionox-vtdr6130: Set prepare_prev_first flagJessica Zhang
The DSI host must be enabled for the panel to be initialized in prepare(). Set the prepare_prev_first flag to guarantee this. Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240201-visionox-vtdr-prev-first-v2-1-32db52867624@quicinc.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240201-visionox-vtdr-prev-first-v2-1-32db52867624@quicinc.com
2024-02-02drm/panel: novatek-nt36523: Set prepare_prev_firstKonrad Dybcio
The .prepare callback contains the init sequence, so the DSI host *must* be enabled at that point. Set the prepare_prev_first flag to ensure that. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://lore.kernel.org/r/20240201-topic-3623_fix-v1-1-86ee6f20876e@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240201-topic-3623_fix-v1-1-86ee6f20876e@linaro.org
2024-01-29Merge drm/drm-next into drm-misc-nextMaxime Ripard
Kickstart 6.9 development cycle. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-01-29drm/panel: simple: Add EDT ETML1010G3DRA panelPrimoz Fiser
Add support for the EDT ETML1010G3DRA 10.1" 1280x800 LVDS panel. Datasheet can be found at [1]. [1] https://www.glynshop.com/erp/owweb/Daten/DSS/EDT/Products/Specifications/Active%20Displays/ETML1010G3DRA%20Ver.3-RoHS.pdf Signed-off-by: Primoz Fiser <primoz.fiser@norik.com> Signed-off-by: Yannic Moog <y.moog@phytec.de> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://lore.kernel.org/r/20240126-wip-y-moog-phytec-de-upstream-pollux-lvds-v1-2-8ec5b48eec05@phytec.de Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240126-wip-y-moog-phytec-de-upstream-pollux-lvds-v1-2-8ec5b48eec05@phytec.de
2024-01-22Merge v6.8-rc1 into drm-misc-fixesMaxime Ripard
Let's kickstart the 6.8 fix cycle. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-01-19drm/panel: novatek-nt36672e: Include <linux/of.h>Ritesh Kumar
Include <linux/of.h> instead of <linux/of_device.h> to fix below compilation errors: drivers/gpu/drm/panel/panel-novatek-nt36672e.c:564:14: error: implicit declaration of function 'of_device_get_match_data' ctx->desc = of_device_get_match_data(dev); ^ drivers/gpu/drm/panel/panel-novatek-nt36672e.c:622:34: error: array type has incomplete element type 'struct of_device_id' static const struct of_device_id nt36672e_of_match[] = { ^ Signed-off-by: Ritesh Kumar <quic_riteshk@quicinc.com> Fixes: ea4f9975625a ("drm/panel: Add support for Novatek NT36672E panel driver") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240116071803.5264-1-quic_riteshk@quicinc.com
2024-01-15drm/panel: nt36523: Set 120Hz fps for xiaomi,elish panelsJianhua Lu
After commit e6c0de5f4450 ("drm/msm/dpu: try multirect based on mdp clock limits") merged, 120Hz is working on xiaomi,elish panels, so feature it. Signed-off-by: Jianhua Lu <lujianhua000@gmail.com> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://lore.kernel.org/r/20240112140047.18123-1-lujianhua000@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240112140047.18123-1-lujianhua000@gmail.com
2024-01-12Merge tag 'drm-next-2024-01-10' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "This contains two major new drivers: - imagination is a first driver for Imagination Technologies devices, it only covers very specific devices, but there is hope to grow it - xe is a reboot of the i915 GPU (shares display) side using a more upstream focused development model, and trying to maximise code sharing. It's not enabled for any hw by default, and will hopefully get switched on for Intel's Lunarlake. This also drops a bunch of the old UMS ioctls. It's been dead long enough. amdgpu has a bunch of new color management code that is being used in the Steam Deck. amdgpu also has a new ACPI WBRF interaction to help avoid radio interference. Otherwise it's the usual lots of changes in lots of places. Detailed summary: new drivers: - imagination - new driver for Imagination Technologies GPU - xe - new driver for Intel GPUs using core drm concepts core: - add CLOSE_FB ioctl - remove old UMS ioctls - increase max objects to accomodate AMD color mgmt encoder: - create per-encoder debugfs directory edid: - split out drm_eld - SAD helpers - drop edid_firmware module parameter format-helper: - cache format conversion buffers sched: - move from kthread to workqueue - rename some internals - implement dynamic job-flow control gpuvm: - provide more features to handle GEM objects client: - don't acquire module reference displayport: - add mst path property documentation fdinfo: - alignment fix dma-buf: - add fence timestamp helper - add fence deadline support bridge: - transparent aux-bridge for DP/USB-C - lt8912b: add suspend/resume support and power regulator support panel: - edp: AUO B116XTN02, BOE NT116WHM-N21,836X2, NV116WHM-N49 - chromebook panel support - elida-kd35t133: rework pm - powkiddy RK2023 panel - himax-hx8394: drop prepare/unprepare and shutdown logic - BOE BP101WX1-100, Powkiddy X55, Ampire AM8001280G - Evervision VGG644804, SDC ATNA45AF01 - nv3052c: register docs, init sequence fixes, fascontek FS035VG158 - st7701: Anbernic RG-ARC support - r63353 panel controller - Ilitek ILI9805 panel controller - AUO G156HAN04.0 simplefb: - support memory regions - support power domains amdgpu: - add new 64-bit sequence number infrastructure - add AMD specific color management - ACPI WBRF support for RF interference handling - GPUVM updates - RAS updates - DCN 3.5 updates - Rework PCIe link speed handling - Document GPU reset types - DMUB fixes - eDP fixes - NBIO 7.9/7.11 updates - SubVP updates - XGMI PCIe state dumping for aqua vanjaram - GFX11 golden register updates - enable tunnelling on high pri compute amdkfd: - Migrate TLB flushing logic to amdgpu - Trap handler fixes - Fix restore workers handling on suspend/resume - Fix possible memory leak in pqm_uninit() - support import/export of dma-bufs using GEM handles radeon: - fix possible overflows in command buffer checking - check for errors in ring_lock i915: - reorg display code for reuse in xe driver - fdinfo memory stats printing - DP MST bandwidth mgmt improvements - DP panel replay enabling - MTL C20 phy state verification - MTL DP DSC fractional bpp support - Audio fastset support - use dma_fence interfaces instead of i915_sw_fence - Separate gem and display code - AUX register macro refactoring - Separate display module/device parameters - Move display capabilities debugfs under display - Makefile cleanups - Register cleanups - Move display lock inits under display/ - VLV/CHV DPIO PHY register and interface refactoring - DSI VBT sequence refactoring - C10/C20 PHY PLL hardware readout - DPLL code cleanups - Cleanup PXP plane protection checks - Improve display debug msgs - PSR selective fetch fixes/improvements - DP MST fixes - Xe2LPD FBC restrictions removed - DGFX uses direct VBT pin mapping - more MTL WAs - fix MTL eDP bug - eliminate use of kmap_atomic habanalabs: - sysfs entry to identify a device minor id with debugfs path - sysfs entry to expose device module id - add signed device info retrieval through INFO ioctl - add Gaudi2C device support - pcie reset prepare/done hooks msm: - Add support for SDM670, SM8650 - Handle the CFG interconnect to fix the obscure hangs / timeouts - Kconfig fix for QMP dependency - use managed allocators - DPU: SDM670, SM8650 support - DPU: Enable SmartDMA on SM8350 and SM8450 - DP: enable runtime PM support - GPU: add metadata UAPI - GPU: move devcoredumps to GPU device - GPU: convert to drm_exec ivpu: - update FW API - new debugfs file - a new NOP job submission test mode - improve suspend/resume - PM improvements - MMU PT optimizations - firmware profile frequency support - support for uncached buffers - switch to gem shmem helpers - replace kthread with threaded irqs rockchip: - rk3066_hdmi: convert to atomic - vop2: support nv20 and nv30 - rk3588 support mediatek: - use devm_platform_ioremap_resource - stop using iommu_present - MT8188 VDOSYS1 display support panfrost: - PM improvements - improve interrupt handling as poweroff qaic: - allow to run with single MSI - support host/device time sync - switch to persistent DRM devices exynos: - fix potential error pointer dereference - fix wrong error checking - add missing call to drm_atomic_helper_shutdown omapdrm: - dma-fence lockdep annotation fix tidss: - dma-fence lockdep annotation fix - support for AM62A7 v3d: - BCM2712 - rpi5 support - fdinfo + gputop support - uapi for CPU job handling virtio-gpu: - add context debug name" * tag 'drm-next-2024-01-10' of git://anongit.freedesktop.org/drm/drm: (2340 commits) drm/amd/display: Allow z8/z10 from driver drm/amd/display: fix bandwidth validation failure on DCN 2.1 drm/amdgpu: apply the RV2 system aperture fix to RN/CZN as well drm/amd/display: Move fixpt_from_s3132 to amdgpu_dm drm/amd/display: Fix recent checkpatch errors in amdgpu_dm Revert "drm/amdkfd: Relocate TBA/TMA to opposite side of VM hole" drm/amd/display: avoid stringop-overflow warnings for dp_decide_lane_settings() drm/amd/display: Fix power_helpers.c codestyle drm/amd/display: Fix hdcp_log.h codestyle drm/amd/display: Fix hdcp2_execution.c codestyle drm/amd/display: Fix hdcp_psp.h codestyle drm/amd/display: Fix freesync.c codestyle drm/amd/display: Fix hdcp_psp.c codestyle drm/amd/display: Fix hdcp1_execution.c codestyle drm/amd/pm/smu7: fix a memleak in smu7_hwmgr_backend_init drm/amdkfd: Fix iterator used outside loop in 'kfd_add_peer_prop()' drm/amdgpu: Drop 'fence' check in 'to_amdgpu_amdkfd_fence()' drm/amdkfd: Confirm list is non-empty before utilizing list_first_entry in kfd_topology.c drm/amdgpu: Fix '*fw' from request_firmware() not released in 'amdgpu_ucode_request()' drm/amdgpu: Fix variable 'mca_funcs' dereferenced before NULL check in 'amdgpu_mca_smu_get_mca_entry()' ...
2024-01-12drm/panel: Simplify with dev_err_probe()Chen Haonan
dev_err_probe() can check if the error code is -EPROBE_DEFER and can return the error code, replacing dev_err() with it simplifies the code. Signed-off-by: Chen Haonan <chen.haonan2@zte.com.cn> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://lore.kernel.org/r/3ac20d355b0b3ad3cedb87c8f4efa819a055624b.1702967834.git.chen.haonan2@zte.com.cn Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/3ac20d355b0b3ad3cedb87c8f4efa819a055624b.1702967834.git.chen.haonan2@zte.com.cn
2024-01-12drm/panel: Add support for Novatek NT36672E panel driverRitesh Kumar
Add support for the 1080x2408 Novatek NT36672E video mode DSI panel driver. Signed-off-by: Ritesh Kumar <quic_riteshk@quicinc.com> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://lore.kernel.org/r/20240108095902.22725-3-quic_riteshk@quicinc.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240108095902.22725-3-quic_riteshk@quicinc.com
2024-01-12drm/panel/raydium-rm692e5: select CONFIG_DRM_DISPLAY_DP_HELPERArnd Bergmann
As with several other panel drivers, this fails to link without the DP helper library: ld: drivers/gpu/drm/panel/panel-raydium-rm692e5.o: in function `rm692e5_prepare': panel-raydium-rm692e5.c:(.text+0x11f4): undefined reference to `drm_dsc_pps_payload_pack' Select the same symbols that the others already use. Fixes: 988d0ff29ecf7 ("drm/panel: Add driver for BOE RM692E5 AMOLED panel") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231023115619.3551348-1-arnd@kernel.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231023115619.3551348-1-arnd@kernel.org
2024-01-12drm/panel: samsung-s6d7aa0: drop DRM_BUS_FLAG_DE_HIGH for lsl080al02Artur Weber
It turns out that I had misconfigured the device I was using the panel with; the bus data polarity is not high for this panel, I had to change the config on the display controller's side. Fix the panel config to properly reflect its accurate settings. Fixes: 6810bb390282 ("drm/panel: Add Samsung S6D7AA0 panel controller driver") Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Link: https://lore.kernel.org/r/20240105-tab3-display-fixes-v2-2-904d1207bf6f@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240105-tab3-display-fixes-v2-2-904d1207bf6f@gmail.com
2024-01-12drm/panel: Add driver for BOE TH101MB31IG002-28A panelAlexander Warnecke
The BOE TH101MB31IG002-28A panel is a WXGA panel. It is used in Pine64 PineTab2 and PineTab-V. Signed-off-by: Alexander Warnecke <awarnecke002@hotmail.com> Signed-off-by: Manuel Traut <manut@mecka.net> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://lore.kernel.org/r/20240102-pinetab2-v3-2-cb1aa69f8c30@mecka.net Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240102-pinetab2-v3-2-cb1aa69f8c30@mecka.net
2024-01-12drm: panel: simple: convert LG LB070WV8 fixed mode into display timingsAlexander Stein
At least the pixelclock has a range which can vary. Convert fixed mode into display timings so they can be overwritten in DT if necessary. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240110082245.417736-1-alexander.stein@ew.tq-group.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240110082245.417736-1-alexander.stein@ew.tq-group.com
2024-01-12drm: panel-simple: add missing bus flags for Tianma tm070jvhg[30/33]Markus Niebel
The DE signal is active high on this display, fill in the missing bus_flags. This aligns panel_desc with its display_timing. Fixes: 9a2654c0f62a ("drm/panel: Add and fill drm_panel type field") Fixes: b3bfcdf8a3b6 ("drm/panel: simple: add Tianma TM070JVHG33") Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://lore.kernel.org/r/20231012084208.2731650-1-alexander.stein@ew.tq-group.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231012084208.2731650-1-alexander.stein@ew.tq-group.com
2024-01-09drm/panel: nt35510: support FRIDA FRD400B25025-A-CTKDario Binacchi
The initialization commands are taken from the STMicroelectronics driver found at [1]. To ensure backward compatibility, flags have been added to enable gamma correction setting and display control. In other cases, registers have been set to their default values according to the specifications found in the datasheet. [1] https://github.com/STMicroelectronics/STM32CubeF7/blob/master/Drivers/BSP/Components/nt35510/ Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240108201618.2798649-9-dario.binacchi@amarulasolutions.com
2024-01-09drm/panel: nt35510: move hardwired parameters to configurationDario Binacchi
This patch, preparatory for future developments, move the hardwired parameters to configuration data to allow the addition of new NT35510-based panels. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240108201618.2798649-8-dario.binacchi@amarulasolutions.com
2024-01-08drm/panel-edp: use put_sync in unprepareHsin-Yi Wang
Some edp panel requires T10 (Delay from end of valid video data transmitted by the Source device to power-off) less than 500ms. Using autosuspend with delay set as 1000 violates this requirement. Use put_sync_suspend in unprepare to meet the spec. For other cases (such as getting EDID), it still uses autosuspend. Suggested-by: Douglas Anderson <dianders@chromium.org> Fixes: 3235b0f20a0a ("drm/panel: panel-simple: Use runtime pm to avoid excessive unprepare / prepare") Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231220221418.2610185-1-hsinyi@chromium.org
2024-01-04drm/panel: ltk050h3146w: use dev_err_probe wherever possibleQuentin Schulz
This is only a cosmetic change. This replaces a hand-crafted EPROBE_DEFER handling for deciding to print an error message with dev_err_probe. A side-effect is that dev_err_probe also adds a debug message when it's not EPROBE_DEFER, but this is seen as an improvement. Cc: Quentin Schulz <foss+kernel@0leil.net> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Reviewed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240104-ltk-dev_err_probe-v1-2-8ef3c0b585d8@theobroma-systems.com
2024-01-04drm/panel: ltk050h3146w: only print message when GPIO getting is not ↵Quentin Schulz
EPROBE_DEFER devm_gpiod_get_optional may return EPROBE_DEFER in case the GPIO controller isn't yet probed when the panel driver is being probed. In that case, a spurious and confusing error message about not being able to get the reset GPIO is printed even though later on the device actually manages to get probed. Use dev_err_probe instead so that the message is only printed when it truly matters. Cc: Quentin Schulz <foss+kernel@0leil.net> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Reviewed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240104-ltk-dev_err_probe-v1-1-8ef3c0b585d8@theobroma-systems.com
2023-12-19Merge tag 'drm-misc-next-2023-12-14' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for $kernel-version: UAPI Changes: Cross-subsystem Changes: - A few fixes for usb/typec Core Changes: - ci: Updates to the defconfig, igt version, etc. - writeback: Move the atomic_check helper from the encoder to connector Driver Changes: - rockchip: Add support for rk3588 - xe: Update the TODO list - panel: - nv3052c: Register documentation, init sequence improvements and support for the Fascontek FS035VG158 - st7701: Add support for the Anbernic RG-ARC - new driver: Synaptics R63353 panel controller, Ilitek ILI9805 panel controller - new panel: AUO G156HAN04.0 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <mripard@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/aqpn5miejmkks7pbcfex7b6u63uwsruywxsnr3x5ljs45qatin@nbkkej2elk46
2023-12-18drm/panel-edp: Add several generic edp panelsXuxin Xiong
Add support for the following 3 panels: 1. BOE NV116WHM-N49 V8.0 2. BOE NV122WUM-N41 3. CSO MNC207QS1-1 Signed-off-by: Xuxin Xiong <xuxinxiong@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231218095933.2487360-1-xuxinxiong@huaqin.corp-partner.google.com
2023-12-18drm/panel-edp: Add some panels with conservative timingsPin-yen Lin
These panels are used by Mediatek MT8173 Chromebooks, and they used to work with the downstream v4.19 kernel without any specified delay. Back in the v4.19 kernel, they used the "little white lie" approach, which is making the devicetree claim a specific panel's compatible string for many different panels. That was a common solution before the generic edp-panel driver. After we uprevved the device to a newer kernel and used the edp-panel driver, we saw multiple devices reporting warnings of using an unknown panel and falling back to the conservative timings, which means that they turn on/off much more slowly than they should. We tried to fill in the timings for those panels, but we failed to find all the data sheets for them. Therefore, instead of having them use the default conservative timings, update them with less-conservative timings from other panels of the same vendor. The panels should still work under those timings, and we can save some delays and suppress the warnings. Signed-off-by: Pin-yen Lin <treapking@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231214152817.2766280-4-treapking@chromium.org
2023-12-18drm/edp-panel: Add panels delay entriesPin-yen Lin
Add panels used by Mediatek MT8173 Chromebooks. Signed-off-by: Pin-yen Lin <treapking@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231214152817.2766280-3-treapking@chromium.org
2023-12-18drm/panel-edp: Add powered_on_to_enable delayPin-yen Lin
Add the support of powered_on_to_enable delay as the minimum time that needs to have passed between the panel powered on and enable may begin. This delay is seen in BOE panels as the minimum delay of T3+T4+T5+T6+T8 in the eDP timing diagrams. Signed-off-by: Pin-yen Lin <treapking@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231214152817.2766280-2-treapking@chromium.org
2023-12-13drm/panel: ltk050h3146w: Set burst mode for ltk050h3148wFarouk Bouabid
The ltk050h3148w variant expects the horizontal component lane byte clock cycle(lbcc) to be calculated using lane_mbps (burst mode) instead of the pixel clock. Using the pixel clock rate by default for this calculation was introduced in commit ac87d23694f4 ("drm/bridge: synopsys: dw-mipi-dsi: Use pixel clock rate to calculate lbcc") and starting from commit 93e82bb4de01 ("drm/bridge: synopsys: dw-mipi-dsi: Fix hcomponent lbcc for burst mode") only panels that support burst mode can keep using the lane_mbps. So add MIPI_DSI_MODE_VIDEO_BURST as part of the mode_flags for the dsi host. Fixes: 93e82bb4de01 ("drm/bridge: synopsys: dw-mipi-dsi: Fix hcomponent lbcc for burst mode") Signed-off-by: Farouk Bouabid <farouk.bouabid@theobroma-systems.com> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20231213145045.41020-1-farouk.bouabid@theobroma-systems.com
2023-12-13drm/panel: ilitek-ili9805: adjust the includesDario Binacchi
Adjust the includes to explicitly include the correct headers. Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231213112401.2000837-1-dario.binacchi@amarulasolutions.com
2023-12-13drm/panel: synaptics-r63353: adjust the includesDario Binacchi
Adjust the includes to explicitly include the correct headers. Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231213112432.2002832-1-dario.binacchi@amarulasolutions.com
2023-12-12Backmerge tag 'v6.7-rc5' into drm-nextDave Airlie
Linux 6.7-rc5 Alex requested this for some amdkfd work relying on the symbols exports. Signed-off-by: Dave Airlie <airlied@redhat.com>
2023-12-11drm/panel: simple: Add AUO G156HAN04.0 LVDS display supportElmar Albert
G156HAN04.0 is a Color Active Matrix Liquid Crystal Display composed of a TFT LCD panel, a driver circuit, and LED backlight system. The screen format is intended to support the 16:9 FHD, 1920(H) x 1080(V) screen and 16.7M colors (RGB 8-bits) with LED backlight driving circuit. All input signals are LVDS interface compatible. G156HAN04.0 is designed for a display unit of notebook style personal computer and industrial machine. Signed-off-by: Elmar Albert <ealbert@data-modul.com> Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20231209063714.1381913-2-marex@denx.de Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231209063714.1381913-2-marex@denx.de
2023-12-11drm/panel: ilitek-ili9805: add support for Tianma TM041XDHG01 panelMichael Trimarchi
Tianma TM041XDHG01 utilizes the Ilitek ILI9805 controller. Add this panel's initialzation sequence and timing to ILI9805 driver. Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/r/20231207141723.108004-10-dario.binacchi@amarulasolutions.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231207141723.108004-10-dario.binacchi@amarulasolutions.com
2023-12-11drm/panel: Add Ilitek ILI9805 panel driverMichael Trimarchi
The GPM1790A0 panel is based on the Ilitek ILI9805 Controller. Add a driver for it. Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231207141723.108004-9-dario.binacchi@amarulasolutions.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231207141723.108004-9-dario.binacchi@amarulasolutions.com
2023-12-11drm/panel: Add Synaptics R63353 panel driverMichael Trimarchi
The LS068B3SX02 panel is based on the Synaptics R63353 Controller. Add a driver for it. Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231207141723.108004-7-dario.binacchi@amarulasolutions.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231207141723.108004-7-dario.binacchi@amarulasolutions.com
2023-12-11drm/panel: st7701: Add Anbernic RG-ARC Panel SupportChris Morgan
The Powkiddy RG-ARC is a series of 2 handheld devices, each with a 4 inch 480x640 display. Add support for the display. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231208154847.130615-4-macroalpha82@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231208154847.130615-4-macroalpha82@gmail.com
2023-12-11drm/panel: st7701: Fix AVCL calculationChris Morgan
The AVCL register, according to the datasheet, comes in increments of -0.2v between -4.4v (represented by 0x0) to -5.0v (represented by 0x3). The current calculation is done by adding the defined AVCL value in mV to -4400 and then dividing by 200 to get the register value. Unfortunately if I subtract -4400 from -4400 I get -8800, which divided by 200 gives me -44. If I instead subtract -4400 from -4400 I get 0, which divided by 200 gives me 0. Based on the datasheet this is the expected register value. Fixes: 83b7a8e7e88e ("drm/panel/panel-sitronix-st7701: Parametrize voltage and timing") Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231208154847.130615-2-macroalpha82@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231208154847.130615-2-macroalpha82@gmail.com
2023-12-11drm/panel: nv3052c: Add Fascontek FS035VG158 LCD displayJohn Watts
This display is extremely similar to the LTK035C5444T, but still has some minor variations in panel initialization. Signed-off-by: John Watts <contact@jookia.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20231210-fs035vg158-v5-4-d75adc75571f@jookia.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231210-fs035vg158-v5-4-d75adc75571f@jookia.org
2023-12-11drm/panel: nv3052c: Allow specifying registers per panelJohn Watts
Panel initialization registers are per-display and not tied to the controller itself. Different panels will specify their own registers. Attach the sequences to the panel info struct so future panels can specify their own sequences. Signed-off-by: John Watts <contact@jookia.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://lore.kernel.org/r/20231210-fs035vg158-v5-3-d75adc75571f@jookia.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231210-fs035vg158-v5-3-d75adc75571f@jookia.org
2023-12-11drm/panel: nv3052c: Add SPI device IDsJohn Watts
SPI drivers needs their own list of compatible device IDs in order for automatic module loading to work. Add those for this driver. Signed-off-by: John Watts <contact@jookia.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20231210-fs035vg158-v5-2-d75adc75571f@jookia.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231210-fs035vg158-v5-2-d75adc75571f@jookia.org
2023-12-11drm/panel: nv3052c: Document known register namesJohn Watts
Many of these registers have a known name in the public datasheet. Document them as comments for reference. Signed-off-by: John Watts <contact@jookia.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20231210-fs035vg158-v5-1-d75adc75571f@jookia.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231210-fs035vg158-v5-1-d75adc75571f@jookia.org
2023-12-07drm/edp-panel: Move the KDC panel to a separate groupPin-yen Lin
Move the KDC panel entry to make the list sorted by the vendor string. Signed-off-by: Pin-yen Lin <treapking@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231207081801.4049075-2-treapking@chromium.org
2023-12-05drm/edp-panel: Sort the panel entriesPin-yen Lin
Move the order of CMN 0x14e5 to make the list sorted. Signed-off-by: Pin-yen Lin <treapking@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231205123630.988663-3-treapking@chromium.org
2023-12-05drm/panel-edp: Add SDC ATNA45AF01Abel Vesa
Add support for the SDC ATNA45AF01 panel. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231201-x1e80100-drm-panel-edp-v2-1-b0173484631a@linaro.org
generated by cgit (git 2.34.1) at 2025-04-16 07:31:23 +0000