Age | Commit message (Collapse) | Author |
|
Add the driver for Samsung AMS581VF01 SOFEF01-based 5.81" FHD Plus CMD
mode OLED panel support found in Google Pixel 4a (sm7150-google-sunfish)
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241013212402.15624-3-danila@jiaxyga.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241013212402.15624-3-danila@jiaxyga.com
|
|
The current panel brightness is only 360 nit. Adjust the power and gamma to
optimize the panel brightness. The brightness after adjustment is 390 nit.
Fixes: 3179338750d8 ("drm/panel: himax-hx83102: Support for IVO t109nw41 MIPI-DSI panel")
Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241011020819.1254157-1-yangcong5@huaqin.corp-partner.google.com
|
|
Introduce low-res IPS and OLED panels for mentioned device.
SHP panel's timings were picked experimentally, without this patch or with
`delay_200_500_e50` panel sometimes fails to boot/stays black on startup.
LGD panel's timings were copied from other LGD panels and tested to be
working.
Particular laptop also comes in high-res IPS variant, which unfortunately
I do not have access to verify.
The raw edid for SHP panel is:
00 ff ff ff ff ff ff 00 4d 10 93 15 00 00 00 00
2c 21 01 04 a5 1d 12 78 07 ee 95 a3 54 4c 99 26
0f 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 f0 7b 80 90 70 b0 52 45 30 20
36 00 20 b4 10 00 00 18 00 00 00 fd 00 1e 78 9a
9a 20 01 0a 20 20 20 20 20 20 00 00 00 fe 00 4b
4a 46 47 52 80 4c 51 31 33 34 4e 31 00 00 00 00
00 02 41 0c 32 00 01 00 00 0b 41 0a 20 20 01 ef
70 20 79 02 00 20 00 13 8c 52 19 93 15 00 00 00
00 2c 17 07 4c 51 31 33 34 4e 31 21 00 1d 40 0b
08 07 80 07 b0 04 88 3d 8a 54 cd a4 99 66 62 0f
02 45 54 d0 5f d0 5f 00 34 12 78 26 00 09 02 00
00 00 00 00 01 00 00 22 00 14 5e d7 04 05 7f 07
8f 00 2f 00 1f 00 af 04 50 00 02 00 05 00 25 01
09 5e d7 04 5e d7 04 1e 78 80 81 00 0b e3 05 80
00 e6 06 01 01 6a 6a 39 00 00 00 00 00 00 ce 90
The raw edid for LGD panel is:
00 ff ff ff ff ff ff 00 30 e4 78 07 00 00 00 00
00 22 01 04 b5 1d 12 78 06 96 65 b0 4f 3c b9 23
0b 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 ef 83 40 a0 b0 08 34 70 30 20
36 00 20 b4 10 00 00 1a 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 fe 00 44
48 39 50 57 80 31 33 34 57 54 31 0a 00 00 00 00
00 04 04 03 28 00 01 00 00 2b 01 0a 20 20 01 d4
70 20 79 02 00 20 00 13 3c e6 24 78 07 00 00 00
00 00 18 07 31 33 34 57 54 31 0a 21 00 1d 41 0b
08 07 40 0b 08 07 88 06 6b 4f c3 a3 b9 35 82 0b
02 45 54 40 5e 1a 60 18 10 23 78 26 00 09 04 00
00 00 00 00 41 00 00 22 00 14 55 27 05 85 3f 0b
9f 00 2f 80 1f 00 07 07 33 00 02 00 05 00 25 01
09 55 27 05 55 27 05 3c 3c 00 81 00 0b e3 05 80
00 e6 06 05 01 6d 60 02 00 00 00 00 00 00 31 90
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Tested-by: Peter de Kraker <peterdekraker@umito.nl>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241008073014.16411-1-alex.vinarskis@gmail.com
|
|
Add the driver for Samsung AMS639RQ08 FHD Plus CMD mode panel support
found in:
- Xiaomi Mi 9 Lite / CC9 (sdm710-xiaomi-pyxis)
- Xiaomi Mi 9T / Redmi K20 (sm7150-xiaomi-davinci)
- Xiaomi Mi 9T Pro / Redmi K20 Pro (sm8150-xiaomi-raphael)
Tested-by: Degdag Mohamed <degdagmohamed@gmail.com> # xiaomi-raphael
Tested-by: Jens Reidel <adrian@travitia.xyz> # xiaomi-davinci
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240930202448.188051-3-danila@jiaxyga.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930202448.188051-3-danila@jiaxyga.com
|
|
Now that the driver has been converted to use wrapped MIPI DCS functions,
the num_init_cmds structure member is no longer needed, so remove it.
Fixes: 35583e129995 ("drm/panel: panel-jadard-jd9365da-h3: use wrapped MIPI DCS functions")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://lore.kernel.org/r/20240930170503.1324560-1-hugo@hugovil.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930170503.1324560-1-hugo@hugovil.com
|
|
Add support for MIPI-DSI based S6E3HA8 AMOLED panel
driver. This panel has 1440x2960 resolution, 5.8-inch physical
size, and can be found in starqltechn device.
Brightness regulation is not yet supported.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20241006-starqltechn_integration_upstream-v6-3-8336b9cd6c34@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241006-starqltechn_integration_upstream-v6-3-8336b9cd6c34@gmail.com
|
|
Assume a default RGB subpixel order and flip it around if 180° rotation
is configured via address mode. Report subpixel order to userspace.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240626-drm-panel-ili9881c-rotation-v1-2-e0ff54173e32@pengutronix.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240626-drm-panel-ili9881c-rotation-v1-2-e0ff54173e32@pengutronix.de
|
|
We can use horizontal and vertical flipping via the MIPI DCS address
mode to rotate the display by 180° using the device tree "rotation"
property. Since the tl050hdv35 panel has been defined as rotated,
we have to invert the bits there.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240626-drm-panel-ili9881c-rotation-v1-1-e0ff54173e32@pengutronix.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240626-drm-panel-ili9881c-rotation-v1-1-e0ff54173e32@pengutronix.de
|
|
Changes the elida-kd35t133 panel to use multi style functions for
improved error handling.
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240925080003.1250448-1-tejasvipin76@gmail.com
|
|
The commit introducing the Frida display started to write the
SETVCMOFF registers unconditionally, and some (not all!) Hydis
display seem to be affected by ghosting after the commit.
Make SETVCMOFF optional and only send these commands on the
Frida display for now.
Reported-by: Stefan Hansson <newbyte@postmarketos.org>
Fixes: 219a1f49094f ("drm/panel: nt35510: support FRIDA FRD400B25025-A-CTK")
Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Tested-by: Stefan Hansson <newbyte@postmarketos.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240908-fix-nt35510-v2-1-d4834b9cdb9b@linaro.org
|
|
Changes the raydium-rm69380 panel to use multi style functions for
improved error handling.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240914034341.897197-1-tejasvipin76@gmail.com
|
|
Use %*ph format to print small buffer as hex string.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240911200125.2886384-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240911200125.2886384-1-andriy.shevchenko@linux.intel.com
|
|
Switch to devm_mipi_dsi_* function, we don't need to detach and
unregister dsi manually any more.
Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240904142907.367786-1-lujianhua000@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240904142907.367786-1-lujianhua000@gmail.com
|
|
make ts050_panel_data and ts050v2_panel_data static because they
are only used in drivers/gpu/drm/panel/panel-khadas-ts050.c,
and fix the following sparse warnings:
drivers/gpu/drm/panel/panel-khadas-ts050.c:620:32:
sparse: warning: symbol 'ts050_panel_data' was not declared. Should it be static?
drivers/gpu/drm/panel/panel-khadas-ts050.c:625:32:
sparse: warning: symbol 'ts050v2_panel_data' was not declared. Should it be static?
No functional changes intended.
Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240908133533.112894-1-minhuadotchen@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240908133533.112894-1-minhuadotchen@gmail.com
|
|
Changes the himax-hx83112a panel to use multi style functions for
improved error handling.
Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240904141521.554451-1-tejasvipin76@gmail.com
|
|
Backmerging to get fixes from v6.12-rc7.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Thomas needs 5a498d4d06d6 ("drm/fbdev-dma: Only install deferred I/O
if necessary") in drm-misc, so start the backmerge cascade.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
|
|
Changes the samsung-s6e3fa7 panel to use multi style functions for
improved error handling.
Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240902071019.351158-1-tejasvipin76@gmail.com
|
|
As per the previous dt-binding commit, update the WL-355608-A8 panel
compatible to reflect the the integrating device vendor and name as the
panel OEM is unknown.
Fixes: 62ea2eeba7bf ("drm: panel: nv3052c: Add WL-355608-A8 panel")
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240904012456.35429-3-ryan@testtoast.com
|
|
Currently the DRM DSC functions are selected by the
DRM_DISPLAY_DP_HELPER Kconfig symbol. This is not optimal, since the DSI
code (both panel and host drivers) end up selecting the seemingly
irrelevant DP helpers. Split the DSC code to be guarded by the separate
DRM_DISPLAY_DSC_HELPER Kconfig symbol.
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> #i915
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240704-panel-sw43408-fix-v6-1-3ea1c94bbb9b@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Remove duplicate code that is handled by tinyDRM,
i.e. drivers/gpu/drm/tiny/ili9341.c.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240813091258.1625646-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Replace deprecated 'mipi_dsi_dcs_write_seq()' macro
to 'mipi_dsi_dcs_write_seq_multi' macro in
panel_nv3051d_init_sequence function.
Signed-off-by: Abhishek Tamboli <abhishektamboli9@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240827152504.30586-1-abhishektamboli9@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240827152504.30586-1-abhishektamboli9@gmail.com
|
|
Changes the novatek-nt35950 panel to use multi style functions for
improved error handling.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240828182210.565861-1-tejasvipin76@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828182210.565861-1-tejasvipin76@gmail.com
|
|
Switch to devm_regulator_bulk_get_const() to stop setting the supplies
list in probe(), and move the regulator_bulk_data struct in static const.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240828-topic-sm8x50-upstream-vtdr6130-multi-v1-2-0cae20d4c55d@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828-topic-sm8x50-upstream-vtdr6130-multi-v1-2-0cae20d4c55d@linaro.org
|
|
Make usage of the new _multi() mipi_dsi functions instead of the
deprecated macros, improving error handling and printing.
bloat-o-meter gives a 12% gain on arm64:
Function old new delta
visionox_vtdr6130_unprepare 208 204 -4
visionox_vtdr6130_prepare 1192 896 -296
Total: Before=2348, After=2048, chg -12.78%
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240828-topic-sm8x50-upstream-vtdr6130-multi-v1-1-0cae20d4c55d@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828-topic-sm8x50-upstream-vtdr6130-multi-v1-1-0cae20d4c55d@linaro.org
|
|
Add support for the 1200x1920 BOE TV101WUM-LL2 DSI Display Panel found
in the Lenovo Smart Tab M10 tablet. The controller is unknown.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240828-topic-sdm450-upstream-tbx605f-panel-v3-2-b792f93e1d6b@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828-topic-sdm450-upstream-tbx605f-panel-v3-2-b792f93e1d6b@linaro.org
|
|
This reverts commit 8ebb1fc2e69ab8b89a425e402c7bd85e053b7b01.
The panel should be handled through the samsung-atna33xc20 driver for
correct power up timings. Otherwise the backlight does not work correctly.
We have existing users of this panel through the generic "edp-panel"
compatible (e.g. the Qualcomm X1E80100 CRD), but the screen works only
partially in that configuration: It works after boot but once the screen
gets disabled it does not turn on again until after reboot. It behaves the
same way with the default "conservative" timings, so we might as well drop
the configuration from the panel-edp driver. That way, users with old DTBs
will get a warning and can move to the new driver.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240715-x1e80100-crd-backlight-v2-2-31b7f2f658a3@linaro.org
|
|
Add an eDP panel entry for BOE NE140WUM-N6G.
Due to lack of documentation, use the delay_200_500_e80 timings like
some other BOE entries for now.
The raw edid of the panel is:
00 ff ff ff ff ff ff 00 09 e5 66 0b 00 00 00 00
1a 20 01 04 a5 1e 13 78 07 01 5f a7 54 4c 9b 24
11 51 56 00 00 00 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 9c 3e 80 c8 70 b0 3c 40 30 20
36 00 2e bc 10 00 00 1a 16 32 80 c8 70 b0 3c 40
30 20 36 00 2e bc 10 00 00 1a 00 00 00 fd 00 1e
3c 4c 4c 10 01 0a 20 20 20 20 20 20 00 00 00 fe
00 4e 45 31 34 30 57 55 4d 2d 4e 36 47 0a 00 dc
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240826-drm-panel-edp-add-boe-ne140wum-n6g-v2-1-2758e8574842@linaro.org
|
|
Changes the jdi-fhd-r63452 panel to use multi style functions for
improved error handling.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240818060816.848784-3-tejasvipin76@gmail.com
|
|
Add detail comments for registers definitions in struct ili9341_config().
Replace TODO with comment for each registers.
Signed-off-by: Abhishek Tamboli <abhishektamboli9@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240819175122.33176-1-abhishektamboli9@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240819175122.33176-1-abhishektamboli9@gmail.com
|
|
Converts uppercase hex to lowercase hex for cleanup.
Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240820091556.1032726-3-tejasvipin76@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240820091556.1032726-3-tejasvipin76@gmail.com
|
|
Changes the mantix-mlaf057we51 panel to use multi style functions for
improved error handling.
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com>
Link: https://lore.kernel.org/r/20240820091556.1032726-2-tejasvipin76@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240820091556.1032726-2-tejasvipin76@gmail.com
|
|
Modify the Melfas panel init code to satisfy the gamma
value of 2.2
Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Zhaoxiong Lv <lvzhaoxiong@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240807100429.13260-3-lvzhaoxiong@huaqin.corp-partner.google.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240807100429.13260-3-lvzhaoxiong@huaqin.corp-partner.google.com
|
|
Move the "exit sleep mode" and "set display on" command from
enable() to init() function.
As mentioned in the patch:
https://lore.kernel.org/all/20240624141926.5250-2-lvzhaoxiong@huaqin.corp-partner.google.com/
The Mediatek Soc DSI host has different modes in prepare() and
enable() functions, prepare() is in LP mode and enable() is in
HS mode. Since the "exit sleep mode" and "set display on"
command must also be sent in LP mode, so we also move "exit
sleep mode" and "set display on" command to the init() function.
We have no other actions in the enable() function after moves
"exit sleep mode" and "set display on", and we checked the call
of the enable() function during the "startup" process. It seems
that only one judgment was made in drm_panel_enabel(). If the
panel does not define enable(), the judgment will skip the
enable() and continue execution. This does not seem to have
any other effect, and we found that some drivers also seem
to have no enable() function added, for example:
panel-asus-z00t-tm5p5-n35596 / panel-boe-himax8279d...
In addition, we briefly tested the kingdisplay_kd101ne3 panel and
melfas_lmfbx101117480 panel, and it seems that there is no garbage
on the panel, so we delete enable() function.
After moving the "exit sleep mode" and "set display on" command
to the init() function, we no longer need additional delay
judgment, so we delete variables "exit_sleep_to_display_on_delay_ms"
and "display_on_delay_ms".
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Zhaoxiong Lv <lvzhaoxiong@huaqin.corp-partner.google.com>
Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://lore.kernel.org/r/20240807100429.13260-2-lvzhaoxiong@huaqin.corp-partner.google.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240807100429.13260-2-lvzhaoxiong@huaqin.corp-partner.google.com
|
|
ON Tat Industrial Company KD50G21-40NT-A1 is a 5" WVGA LCD panel with DPI
interface.
The LCD module specification can be found at:
https://cdn-shop.adafruit.com/datasheets/KD50G21-40NT-A1.pdf
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240816085004.491494-3-victor.liu@nxp.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240816085004.491494-3-victor.liu@nxp.com
|
|
The Anbernic RG28XX is a handheld gaming device with a 2.8 inch 480x640
display. Add support for the display panel.
This panel is driven by a variant of ST7701 driver IC internally,
confirmed by dumping and analyzing its BSP initialization sequence
by using a logic analyzer. It is very similar to the existing
densitron,dmt028vghmcmi-1a panel, but differs in some unknown
register values. Besides, it is connected via SPI, so add a new entry
for the panel.
Signed-off-by: Hironori KIKUCHI <kikuchan98@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240804061503.881283-6-kikuchan98@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240804061503.881283-6-kikuchan98@gmail.com
|
|
The ST7701 supports not only MIPI DSI, but also SPI as an interface
for configuration. To support a panel connected via SPI with an RGB
parallel interface, add support for SPI using MIPI DBI helpers.
Signed-off-by: Hironori KIKUCHI <kikuchan98@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240804061503.881283-5-kikuchan98@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240804061503.881283-5-kikuchan98@gmail.com
|
|
Split into a DSI-specific part and a DRM-specific part.
Additionally, use devm_add_action_or_reset() to simplify the flow,
and disable and unprepare the panel on cleanup.
Signed-off-by: Hironori KIKUCHI <kikuchan98@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240804061503.881283-3-kikuchan98@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240804061503.881283-3-kikuchan98@gmail.com
|
|
Rename DSI_CMD* macros to ST7701_CMD*, and ST7701_DSI macro to
ST7701_WRITE, because they do not belong to DSI.
Signed-off-by: Hironori KIKUCHI <kikuchan98@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240804061503.881283-2-kikuchan98@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240804061503.881283-2-kikuchan98@gmail.com
|
|
The G070ACE-LH3 is a 7" TFT Color LCD module with WLED backlight.
https://www.data-modul.com/sites/default/files/products/G070ACE-LH3-specification-12058417.pdf
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240729-b4-v6-10-topic-innolux-v2-2-27d32c766ce5@pengutronix.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240729-b4-v6-10-topic-innolux-v2-2-27d32c766ce5@pengutronix.de
|
|
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality or semantics.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240731122311.1143153-8-tzimmermann@suse.de
|
|
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality or semantics.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240731122311.1143153-7-tzimmermann@suse.de
|
|
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality or semantics.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240731122311.1143153-6-tzimmermann@suse.de
|
|
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality or semantics.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240731122311.1143153-5-tzimmermann@suse.de
|
|
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality or semantics.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240731122311.1143153-4-tzimmermann@suse.de
|
|
Use multi style wrapped functions for mipi_dsi in the
startek-kd070fhfid015 panel.
Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240806135949.468636-3-tejasvipin76@gmail.com
|
|
Rename HKC MB116AN01 from Unknown to MB116AN01
Signed-off-by: Terry Hsiao <terry_hsiao@compal.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240802070602.154201-1-terry_hsiao@compal.corp-partner.google.com
|
|
Backmerging to get a late RC of v6.10 before moving into v6.11.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Add support for the CSW MNB601LS1-4, pleace the EDID here for
subsequent reference.
00 ff ff ff ff ff ff 00 0e 77 04 11 00 00 00 00
00 22 01 04 a5 1a 0e 78 03 a1 35 9b 5e 58 91 25
1c 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 09 1e 56 dc 50 00 28 30 30 20
36 00 00 90 10 00 00 1a 00 00 00 fd 00 28 3c 30
30 08 01 0a 20 20 20 20 20 20 00 00 00 fe 00 43
53 4f 54 20 54 39 0a 20 20 20 20 20 00 00 00 fe
00 4d 4e 42 36 30 31 4c 53 31 2d 34 0a 20 00 20
Signed-off-by: Haikun Zhou <zhouhaikun5@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240725115229.3416028-1-zhouhaikun5@huaqin.corp-partner.google.com
|
|
Break select page cmds and reload cmds into helper functions.
Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240710084715.1119935-4-yangcong5@huaqin.corp-partner.google.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240710084715.1119935-4-yangcong5@huaqin.corp-partner.google.com
|