| Age | Commit message (Collapse) | Author |
|---|
|
Expose system timestamp and frequency supported by the GPU.
Mali uses an external timer as GPU system time. On ARM, this is wired to
the generic arch timer so we wire cntfrq_el0 as device frequency.
This new uAPI will be used in Mesa to implement timestamp queries and
VK_KHR_calibrated_timestamps.
v2:
- Rewrote to use GPU timestamp register
- Add missing include for arch_timer_get_cntfrq
- Rework commit message
v3:
- Move panfrost_cycle_counter_get and panfrost_cycle_counter_put to
panfrost_ioctl_query_timestamp
- Handle possible overflow in panfrost_timestamp_read
Signed-off-by: Mary Guillemard <mary.guillemard@collabora.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240819080224.24914-2-mary.guillemard@collabora.com
|
|
To make sure that we don't unintentionally perform any unclocked and/or
unpowered R/W operation on GPU registers, before turning off clocks and
regulators we must make sure that no GPU, JOB or MMU ISR execution is
pending: doing that requires to add a mechanism to synchronize the
interrupts on suspend.
Add functions panfrost_{gpu,job,mmu}_suspend_irq() which will perform
interrupts masking and ISR execution synchronization, and then call
those in the panfrost_device_runtime_suspend() handler in the exact
sequence of job (may require mmu!) -> mmu -> gpu.
As a side note, JOB and MMU suspend_irq functions needed some special
treatment: as their interrupt handlers will unmask interrupts, it was
necessary to add an `is_suspended` bitmap which is used to address the
possible corner case of unintentional IRQ unmasking because of ISR
execution after a call to synchronize_irq().
At resume, clear each is_suspended bit in the reset path of JOB/MMU
to allow unmasking the interrupts.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204114215.54575-4-angelogioacchino.delregno@collabora.com
|
|
The drm-stats fdinfo tags made available to user space are drm-engine,
drm-cycles, drm-max-freq and drm-curfreq, one per job slot.
This deviates from standard practice in other DRM drivers, where a single
set of key:value pairs is provided for the whole render engine. However,
Panfrost has separate queues for fragment and vertex/tiler jobs, so a
decision was made to calculate bus cycles and workload times separately.
Maximum operating frequency is calculated at devfreq initialisation time.
Current frequency is made available to user space because nvtop uses it
when performing engine usage calculations.
It is important to bear in mind that both GPU cycle and kernel time numbers
provided are at best rough estimations, and always reported in excess from
the actual figure because of two reasons:
- Excess time because of the delay between the end of a job processing,
the subsequent job IRQ and the actual time of the sample.
- Time spent in the engine queue waiting for the GPU to pick up the next
job.
To avoid race conditions during enablement/disabling, a reference counting
mechanism was introduced, and a job flag that tells us whether a given job
increased the refcount. This is necessary, because user space can toggle
cycle counting through a debugfs file, and a given job might have been in
flight by the time cycle counting was disabled.
The main goal of the debugfs cycle counter knob is letting tools like nvtop
or IGT's gputop switch it at any time, to avoid power waste in case no
engine usage measuring is necessary.
Also add a documentation file explaining the possible values for fdinfo's
engine keystrings and Panfrost-specific drm-curfreq-<keystr> pairs.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230929181616.2769345-3-adrian.larumbe@collabora.com
|
|
The T820, G31 & G52 GPUs integrated by Amlogic in the respective GXM,
G12A/SM1 & G12B SoCs needs a quirk in the PWR registers at the GPU reset
time.
Since the Amlogic's integration of the GPU cores with the SoC is not
publicly documented we do not know what does these values, but they
permit having a fully functional GPU running with Panfrost.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[Steven: Fix typo in commit log]
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200916150147.25753-3-narmstrong@baylibre.com
|
|
This adds the initial driver for panfrost which supports Arm Mali
Midgard and Bifrost family of GPUs. Currently, only the T860 and
T760 Midgard GPUs have been tested.
v2:
- Add GPU reset on job hangs (Tomeu)
- Add RuntimePM and devfreq support (Tomeu)
- Fix T760 support (Tomeu)
- Add a TODO file (Rob, Tomeu)
- Support multiple in fences (Tomeu)
- Drop support for shared fences (Tomeu)
- Fill in MMU de-init (Rob)
- Move register definitions back to single header (Rob)
- Clean-up hardcoded job submit todos (Rob)
- Implement feature setup based on features/issues (Rob)
- Add remaining Midgard DT compatible strings (Rob)
v3:
- Add support for reset lines (Neil)
- Add a MAINTAINERS entry (Rob)
- Call dma_set_mask_and_coherent (Rob)
- Do MMU invalidate on map and unmap. Restructure to do a single
operation per map/unmap call. (Rob)
- Add a missing explicit padding to struct drm_panfrost_create_bo (Rob)
- Fix 0-day error: "panfrost_devfreq.c:151:9-16: ERROR: PTR_ERR applied after initialization to constant on line 150"
- Drop HW_FEATURE_AARCH64_MMU conditional (Rob)
- s/DRM_PANFROST_PARAM_GPU_ID/DRM_PANFROST_PARAM_GPU_PROD_ID/ (Rob)
- Check drm_gem_shmem_prime_import_sg_table() error code (Rob)
- Re-order power on sequence (Rob)
- Move panfrost_acquire_object_fences() before scheduling job (Rob)
- Add NULL checks on array pointers in job clean-up (Rob)
- Rework devfreq (Tomeu)
- Fix devfreq init with no regulator (Rob)
- Various WS and comments clean-up (Rob)
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marty E. Plummer <hanetzer@startmail.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190409205427.6943-4-robh@kernel.org
|
