summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/radeon/r600d.h
AgeCommit message (Collapse)Author
2016-08-24drm/radeon: add support for UVD_NO_OP registerAlex Deucher
Writes to this register are the preferred way to do NOPs. Bump the driver version as well. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-10-14Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm updates from Dave Airlie: "This is the main git pull for the drm, I pretty much froze major pulls at -rc5/6 time, and haven't had much fallout, so will probably continue doing that. Lots of changes all over, big internal header cleanup to make it clear drm features are legacy things and what are things that modern KMS drivers should be using. Also big move to use the new generic fences in all the TTM drivers. core: atomic prep work, vblank rework changes, allows immediate vblank disables major header reworking and cleanups to better delinate legacy interfaces from what KMS drivers should be using. cursor planes locking fixes ttm: move to generic fences (affects all TTM drivers) ppc64 caching fixes radeon: userptr support, uvd for old asics, reset rework for fence changes better buffer placement changes, dpm feature enablement hdmi audio support fixes intel: Cherryview work, 180 degree rotation, skylake prep work, execlist command submission full ppgtt prep work cursor improvements edid caching, vdd handling improvements nouveau: fence reworking kepler memory clock work gt21x clock work fan control improvements hdmi infoframe fixes DP audio ast: ppc64 fixes caching fix rcar: rcar-du DT support ipuv3: prep work for capture support msm: LVDS support for mdp4, new panel, gpu refactoring exynos: exynos3250 SoC support, drop bad mmap interface, mipi dsi changes, and component match support" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (640 commits) drm/mst: rework payload table allocation to conform better. drm/ast: Fix HW cursor image drm/radeon/kv: add uvd/vce info to dpm debugfs output drm/radeon/ci: add uvd/vce info to dpm debugfs output drm/radeon: export reservation_object from dmabuf to ttm drm/radeon: cope with foreign fences inside the reservation object drm/radeon: cope with foreign fences inside display drm/core: use helper to check driver features drm/radeon/cik: write gfx ucode version to ucode addr reg drm/radeon/si: print full CS when we hit a packet 0 drm/radeon: remove unecessary includes drm/radeon/combios: declare legacy_connector_convert as static drm/radeon/atombios: declare connector convert tables as static drm/radeon: drop btc_get_max_clock_from_voltage_dependency_table drm/radeon/dpm: drop clk/voltage dependency filters for BTC drm/radeon/dpm: drop clk/voltage dependency filters for CI drm/radeon/dpm: drop clk/voltage dependency filters for SI drm/radeon/dpm: drop clk/voltage dependency filters for NI drm/radeon: disable audio when we disable hdmi (v2) drm/radeon: split audio enable between eg and r600 (v2) ...
2014-10-01drm/radeon: split audio enable between eg and r600 (v2)Alex Deucher
Clean up the enable sequence as well. V2: clean up duplicate defines Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-09-18drm/radeon: delete unused PTE_* definesKyle McMartin
They don't appear to be used anywhere... elsewhere uses R*_PTE_*. master@linux:U:.% git grep PTE_ -- drivers/gpu/drm/radeon | grep -v _PTE_ master@linux:U:.% (kyle@redacted:~/linux) ./arch/arm64/include/asm/pgtable.h:27:0: note: this is the location of the previous definition #define PTE_VALID (_AT(pteval_t, 1) << 0) ^ In file included from drivers/gpu/drm/radeon/r600_cs.c:31:0: drivers/gpu/drm/radeon/r600d.h:48:0: warning: "PTE_VALID" redefined [enabled by default] #define PTE_VALID (1 << 0) ^ In file included from ./arch/arm64/include/asm/io.h:29:0, from include/linux/clocksource.h:19, from include/clocksource/arm_arch_timer.h:19, from ./arch/arm64/include/asm/arch_timer.h:27, from ./arch/arm64/include/asm/timex.h:19, from include/linux/timex.h:65, <snip> from include/drm/drmP.h:51, from drivers/gpu/drm/radeon/r600_cs.c:29: ./arch/arm64/include/asm/pgtable.h:27:0: note: this is the location of the previous definition #define PTE_VALID (_AT(pteval_t, 1) << 0) ^ Signed-off-by: Kyle McMartin <kyle@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-08-27drm/radeon: implement UVD hw workarounds for R6xx v3Christian König
Only the essentials, cause this hw generation is really buggy. v2: start supporting RV670,RV620 and RV635 as well v3: activate more workarounds Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-08-27drm/radeon: add UVD support for older asics v4Christian König
v2: cleanup R600 support v3: rebased on current drm-fixes-3.12 v4: rebased on drm-next-3.14 Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-08-27drm/radeon: add set_uvd_clocks callback for r6xx v4Alex Deucher
v2: wake up PLL, set [VD]CLK_SRC, cleanup code v3: handle RV670,RV635,RV620 as well v4: merge rv6xx and rs780/rs880 code, fix ref divider mask Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2014-08-27drm/radeon: properly init UVD MC bits on R600Christian König
Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-08-19drm/radeon: Sync ME and PFP after CP semaphore waits v4Christian König
Fixes lockups due to CP read GPUVM faults when running piglit on Cape Verde. v2 (chk): apply the fix to R600+ as well, on CIK only the GFX CP has a PFP, add more comments to R600 code, enable flushing again v3: (agd5f): only apply to 7xx+. r6xx does not have the packet. v4: (agd5f): split flush change into a separate patch, fix formatting Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Michel Dänzer <michel.daenzer@amd.com>
2014-06-02drm/radeon/hdmi: DCE2: update setmodeRafał Miłecki
Recent RE efforts revealed ops performed by fglrx during HDMI setup. This mostly adds masks to r/w ops plus few single missing bits. This has been tested for possible regressions on: 1) DCE2 HD2400 (RV610) 2) DCE3 HD3470 (RV620) For a reference and details see: https://bugzilla.kernel.org/show_bug.cgi?id=76231 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-06-02drm/radeon/hdmi: DCE3: clean ACR controlRafał Miłecki
What initially seemed to be a typo in fglrx (using register 0x740c instead of 0x74dc) appeared to be a correct behavior. DCE3 has ACR and CRC registers swapped which explains why we needed WREG32(HDMI0_AUDIO_CRC_CONTROL + offset, 0x1000); This has been tested for possible regressions on DCE3 HD3470 (RV620). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-01-20drm/radeon: set the full cache bit for fences on r7xx+Alex Deucher
Needed to properly flush the read caches for fences. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-01-08drm/radeon: implement pci config reset for r6xx/7xx (v3)Alex Deucher
pci config reset is a low level reset that resets the entire chip from the bus interface. It can be more reliable if soft reset fails. There's not much information still available on r6xx, so r6xx is based on guess-work. v2: put behind module parameter v3: add IGP check Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-08Merge tag 'drm-intel-fixes-2013-11-07' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-next Bit a bit -fixes pull request in the merge window than usual dua to two feauture-y things: - Display CRCs are now enabled on all platforms, including the odd DP case on gm45/vlv. Since this is a testing-only feature it should ever hurt, but I figured it'll help with regression-testing -fixes. So I left it in and didn't postpone it to 3.14. - Display power well refactoring from Imre. Would have caused major pain conflict with the bdw stage 1 patches if I'd postpone this to -next. It's only an relatively small interface rework, so shouldn't cause pain. It's also been in my tree since almost 3 weeks already. That accounts for about two thirds of the pull, otherwise just bugfixes: - vlv backlight fix from Jesse/Jani - vlv vblank timestamp fix from Jesse - improved edp detection through vbt from Ville (fixes a vlv issue) - eDP vdd fix from Paulo - fixes for dvo lvds on i830M - a few smaller things all over Note: This contains a backmerge of v3.12. Since the -internal branch always applied on top of -nightly I need that unified base to merge bdw patches. So you'll get a conflict with radeon connector props when pulling this (and nouveau/master will also conflict a bit when Ben doesn't rebase). The backmerge itself only had conflicts in drm/i915. There's also a tiny conflict between Jani's backlight fix and your sysfs lifetime fix in drm-next. * tag 'drm-intel-fixes-2013-11-07' of git://people.freedesktop.org/~danvet/drm-intel: (940 commits) drm/i915/vlv: use per-pipe backlight controls v2 drm/i915: make backlight functions take a connector drm/i915: move opregion asle request handling to a work queue drm/i915/vlv: use PIPE_START_VBLANK interrupts on VLV drm/i915: Make intel_dp_is_edp() less specific drm/i915: Give names to the VBT child device type bits drm/i915/vlv: enable HDA display audio for Valleyview2 drm/i915/dvo: call ->mode_set callback only when the port is running drm/i915: avoid unclaimed registers when capturing the error state drm/i915: Enable DP port CRC for the "auto" source on g4x/vlv drm/i915: scramble reset support for DP port CRC on vlv drm/i915: scramble reset support for DP port CRC on g4x drm/i916: add "auto" pipe CRC source ... Conflicts: MAINTAINERS drivers/gpu/drm/i915/intel_panel.c drivers/gpu/drm/nouveau/core/subdev/mc/base.c drivers/gpu/drm/radeon/atombios_encoders.c drivers/gpu/drm/radeon/radeon_connectors.c
2013-11-01drm/radeon: Add support for programming the FMT blocksAlex Deucher
The FMT blocks control how data is sent from the backend of the display pipe to to monitor. Proper set up of the FMT blocks are required for 30bpp formats. Additionally, dithering can be enabled on for better display with 18 and 24bpp displays. The exception is LVDS/eDP which atom takes care of in the SelectCRTC_Source table. For now just enable truncation until we test dithering more. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-10-09drm/radeon: fix typo in CP DMA register headersAlex Deucher
Wrong bit offset for SRC endian swapping. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-09-15drm/radeon: Fix hmdi typoDamien Lespiau
I keep making that one, so checked if I was the only one. Apparently not. Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon/audio: set up the sads on DCE3.2 asicsAlex Deucher
This sets up the short audio descriptors properly on DCE3.2 asics for hdmi audio. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: set speaker allocation for DCE3.2Alex Deucher
This updates the audio driver to the speaker allocation block from the EDID. A similar change was just implemented for DCE4-8. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-07drm/radeon: fix audio dto calculation on DCE3+ (v3)Alex Deucher
Need to set the wallclock ratio and adjust the phase and module registers appropriately. May fix problems with audio timing at certain display timings. v2: properly handle clocks below 24mhz v3: rebase r600 changes Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-07-14drm/radeon: implement bo copy callback using CP DMA (v2)Alex Deucher
Lighter weight than using the 3D engine. v2: fix ring count Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/kms: add dpm support for rv7xx (v4)Alex Deucher
This adds dpm support for rv7xx asics. This includes: - clockgating - dynamic engine clock scaling - dynamic memory clock scaling - dynamic voltage scaling - dynamic pcie gen1/gen2 switching Set radeon.dpm=1 to enable. v2: reduce stack usage v3: fix 64 bit div v4: fix state enable Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/kms: add dpm support for rv6xx (v3)Alex Deucher
This adds dpm support for rv6xx asics. This includes: - clockgating - dynamic engine clock scaling - dynamic memory clock scaling - dynamic voltage scaling - dynamic pcie gen1/gen2 switching Set radeon.dpm=1 to enable. v2: remove duplicate line v3: fix thermal interrupt check noticed by Jerome Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2013-06-27drm/radeon/kms: add common r600 dpm functionsAlex Deucher
These are shared by rs780/rs880, rv6xx, and newer chips. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon: properly set up the RLC on ON/LN/TN (v3)Alex Deucher
This is required for certain advanced functionality. v2: save/restore list takes dword offsets v3: rebase on gpu reset changes Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-03drm/radeon: Use direct mapping for fast fb access on RS780/RS880 (v2)Samuel Li
v2: fix trailing whitespace Signed-off-by: Samuel Li <samuel.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-05-02drm/radeon: consolidate UVD clock programmingChristian König
Instead of duplicating the code over and over again, just use a single function to handle the clock calculations. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-04-23drm/radeon: fix up audio dto programming for DCE2Alex Deucher
Uses a different register than DCE3 asics. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-04-09drm/radeon: UVD bringup v8Christian König
Just everything needed to decode videos using UVD. v6: just all the bugfixes and support for R7xx-SI merged in one patch v7: UVD_CGC_GATE is a write only register, lockup detection fix v8: split out VRAM fallback changes, remove support for RV770, add support for HEMLOCK, add buffer sizes checks Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-01-31drm/radeon: use status regs to determine what to reset (6xx/7xx)Alex Deucher
When we attempt the reset the GPU, look at the status registers to determine what blocks need to be reset. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-01-31drm/radeon: rework GPU reset on r6xx/r7xxAlex Deucher
Update the code to better match the recommended programming sequence for soft reset. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-01-31drm/radeon: consolidate redundant macros and constantsIlija Hadzic
After refactoring the _cs logic, we ended up with many macros and constants that #define the same thing. Clean'em up. Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Reviewed-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-12-12drm/radeon: add register headers for CP DMA on r6xx-SIAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-12-10drm/radeon/kms: Add initial support for async DMA on r6xx/r7xxAlex Deucher
Uses the new multi-ring infrastucture. 6xx/7xx has a single async DMA ring. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-29drm/radeon: add proper checking of RESOLVE_BOX command for r600-r700Marek Olšák
Checking of the second colorbuffer was skipped on r700, because CB_TARGET_MASK was 0xf. With r600, CB_TARGET_MASK is changed to 0xff, so we must set the number of samples of the second colorbuffer to 1 in order to pass the CS checker. The DRM version is bumped, because RESOLVE_BOX is always rejected without this fix on r600. Signed-off-by: Marek Olšák <maraeo@gmail.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-20drm/radeon: allow CMASK and FMASK in the CS checker on r600-r700Marek Olšák
MSAA is impossible without them. Signed-off-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com>
2012-08-13drm/radeon/kms: implement timestamp userspace query (v2)Marek Olšák
Returns a snapshot of the GPU clock counter. Needed for certain OpenGL extensions. v2: agd5f - address Jerome's comments - add function documentation Signed-off-by: Marek Olšák <maraeo@gmail.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-07-19drm/radeon: improve GPU lockup debugging info on r6xx/r7xx/r8xx/r9xxJerome Glisse
Print various CP register that have valuable informations regarding GPU lockup. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-16drm/radeon: add support for STRMOUT_BASE_UPDATE on 7xxAlex Deucher
Required for streamout. Bump drm minor. Marek v2: fix pkt->count check Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-16drm/radeon: add some additional 6xx/7xx/EG register initAlex Deucher
- SMX_SAR_CTL0 needs to be programmed correctly to prevent problems with memory exports in certain cases. - VC_ENHANCE needs to be initialized on 6xx/7xx. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-01drm/radeon: fixup tiling group size and backendmap on r6xx-r9xx (v4)Alex Deucher
Tiling group size is always 256bits on r6xx/r7xx/r8xx/9xx. Also fix and simplify render backend map. This now properly sets up the backend map on r6xx-9xx which should improve 3D performance. Vadim benchmarked also: Some benchmarks on juniper (5750), fullscreen 1920x1080, first result - kernel 3.4.0+ (fb21affa), second - with these patches: Lightsmark: 91 fps => 123 fps +35% Doom3: 74 fps => 101 fps +36% Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-17drm/radeon/hdmi: store info about all AFMT blocksAlex Deucher
Introduce special struct radeon_afmt for this purpose. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-01drm/radeon/kms/hdmi: use relative offsets, official regsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Christian König <deathsimple@vodafone.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-24drm/radeon/kms: add register definitions for audioAlex Deucher
This adds register definitions for HDMI/DP audio on DCE2/3/4/5 hardware. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-26drm/radeon/kms: add htile support to the cs checker v3Jerome Glisse
For 6xx+. Required for mesa to use htile support for HiZ/HiS. Userspace will check radeon version 2.14 with is bumped either by tiling patch or stream out patch. This patch only add support for htile relocation which should be enough for any userspace to implement the hyperz (using htile buffer) feature. v2: Jerome: Fix size checking for htile buffer. v3: Jerome: Adapt on top of r600/evergreen cs checker changes, also check htile surface in case only stencil is present. Signed-off-by: Pierre-Eric Pelloux-Prayer <pelloux@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-21drm/radeon/kms: add support for ucode loading on trinity (v2)Alex Deucher
v2: fix check for MC ucode from Tom. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-15drm: Merge tag 'v3.3-rc7' into drm-core-nextDave Airlie
Merge the fixes so far into core-next, needed to test intel driver. Conflicts: drivers/gpu/drm/i915/intel_ringbuffer.c
2012-03-07drm/radeon: fix a semaphore deadlock on pre cayman asicsChristian König
The out of order execution of semaphore commands on pre cayman asics doesn't work correctly and can cause deadlocks, so turn it off for now. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-13drm/radeon: add support for evergreen/ni tiling informations v11Jerome Glisse
evergreen and northern island gpu needs more informations for 2D tiling than previous r6xx/r7xx. Add field to tiling ioctl to allow userspace to provide those. The v8 cs checking change to track color view on r6xx/r7xx doesn't affect old userspace as old userspace always emited 0 for this register. v2 fix r6xx/r7xx 2D tiling computation v3 fix r6xx/r7xx height align for untiled surface & add support for tile split on evergreen and newer v4 improve tiling debugging output v5 fix tile split code for evergreen and newer v6 set proper tile split for crtc register v7 fix tile split limit value v8 add COLOR_VIEW checking to r6xx/r7xx checker, add evergreen cs checking, update safe reg for r600, evergreen and cayman. Evergreen checking need some work around for stencil alignment issues v9 fix tile split value range, fix compressed texture handling and mipmap calculation, allow evergreen check to be silencious in front of current broken userspace (depth/stencil alignment issue) v10 fix eg 3d texture and compressed texture, fix r600 depth array, fix r600 color view computation, add support for evergreen stencil split v11 more verbose debugging in some case Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-13drm/radeon/kms: add support for streamout v7Marek Olšák
v2: agd5f: add strmout CS checking, copy_dw register checking v3: agd5f: don't use cs_check_reg() for copy_dw checking as it will incorrectly patch the command stream for certain regs. v4: agd5f: add warning if safe reg check fails for copy_dw v5: agd5f: add stricter checking for 6xx/7xx v6: agd5f: add range checking for copy_dw on eg+, add sx_surface_sync to safe reg list for 7xx. v7: agd5f: add stricter checking for eg+ Signed-off-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit (git 2.34.1) at 2024-06-12 16:59:25 +0000