Age | Commit message (Collapse) | Author |
|
Generate a hotplug event after registering a client to allow the
client to configure its display. Remove the hotplug calls from the
existing clients for fbdev emulation. This change fixes a concurrency
bug between registering a client and receiving events from the DRM
core. The bug is present in the fbdev emulation of all drivers.
The fbdev emulation currently generates a hotplug event before
registering the client to the device. For each new output, the DRM
core sends an additional hotplug event to each registered client.
If the DRM core detects first output between sending the artificial
hotplug and registering the device, the output's hotplug event gets
lost. If this is the first output, the fbdev console display remains
dark. This has been observed with amdgpu and fbdev-generic.
Fix this by adding hotplug generation directly to the client's
register helper drm_client_register(). Registering the client and
receiving events are serialized by struct drm_device.clientlist_mutex.
So an output is either configured by the initial hotplug event, or
the client has already been registered.
The bug was originally added in commit 6e3f17ee73f7 ("drm/fb-helper:
generic: Call drm_client_add() after setup is done"), in which adding
a client and receiving a hotplug event switched order. It was hidden,
as most hardware and drivers have at least on static output configured.
Other drivers didn't use the internal DRM client or still had struct
drm_mode_config_funcs.output_poll_changed set. That callback handled
hotplug events as well. After not setting the callback in amdgpu in
commit 0e3172bac3f4 ("drm/amdgpu: Don't set struct
drm_driver.output_poll_changed"), amdgpu did not show a framebuffer
console if output events got lost. The bug got copy-pasted from
fbdev-generic into the other fbdev emulation.
Reported-by: Moritz Duge <MoritzDuge@kolahilft.de>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2649
Fixes: 6e3f17ee73f7 ("drm/fb-helper: generic: Call drm_client_add() after setup is done")
Fixes: 8ab59da26bc0 ("drm/fb-helper: Move generic fbdev emulation into separate source file")
Fixes: b79fe9abd58b ("drm/fbdev-dma: Implement fbdev emulation for GEM DMA helpers")
Fixes: 63c381552f69 ("drm/armada: Implement fbdev emulation as in-kernel client")
Fixes: 49953b70e7d3 ("drm/exynos: Implement fbdev emulation as in-kernel client")
Fixes: 8f1aaccb04b7 ("drm/gma500: Implement client-based fbdev emulation")
Fixes: 940b869c2f2f ("drm/msm: Implement fbdev emulation as in-kernel client")
Fixes: 9e69bcd88e45 ("drm/omapdrm: Implement fbdev emulation as in-kernel client")
Fixes: e317a69fe891 ("drm/radeon: Implement client-based fbdev emulation")
Fixes: 71ec16f45ef8 ("drm/tegra: Implement fbdev emulation as in-kernel client")
Fixes: 0e3172bac3f4 ("drm/amdgpu: Don't set struct drm_driver.output_poll_changed")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Moritz Duge <MoritzDuge@kolahilft.de>
Tested-by: Torsten Krah <krah.tm@gmail.com>
Tested-by: Paul Schyska <pschyska@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Mikko Perttunen <mperttunen@nvidia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-tegra@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # msm
Link: https://patchwork.freedesktop.org/patch/msgid/20230710091029.27503-1-tzimmermann@suse.de
|
|
Pull drm updates from Dave Airlie:
"There is one set of patches to misc for a i915 gsc/mei proxy driver.
Otherwise it's mostly amdgpu/i915/msm, lots of hw enablement and lots
of refactoring.
core:
- replace strlcpy with strscpy
- EDID changes to support further conversion to struct drm_edid
- Move i915 DSC parameter code to common DRM helpers
- Add Colorspace functionality
aperture:
- ignore framebuffers with non-primary devices
fbdev:
- use fbdev i/o helpers
- add Kconfig options for fb_ops helpers
- use new fb io helpers directly in drivers
sysfs:
- export DRM connector ID
scheduler:
- Avoid an infinite loop
ttm:
- store function table in .rodata
- Add query for TTM mem limit
- Add NUMA awareness to pools
- Export ttm_pool_fini()
bridge:
- fsl-ldb: support i.MX6SX
- lt9211, lt9611: remove blanking packets
- tc358768: implement input bus formats, devm cleanups
- ti-snd65dsi86: implement wait_hpd_asserted
- analogix: fix endless probe loop
- samsung-dsim: support swapped clock, fix enabling, support var
clock
- display-connector: Add support for external power supply
- imx: Fix module linking
- tc358762: Support reset GPIO
panel:
- nt36523: Support Lenovo J606F
- st7703: Support Anbernic RG353V-V2
- InnoLux G070ACE-L01 support
- boe-tv101wum-nl6: Improve initialization
- sharp-ls043t1le001: Mode fixes
- simple: BOE EV121WXM-N10-1850, S6D7AA0
- Ampire AM-800480L1TMQW-T00H
- Rocktech RK043FN48H
- Starry himax83102-j02
- Starry ili9882t
amdgpu:
- add new ctx query flag to handle reset better
- add new query/set shadow buffer for rdna3
- DCN 3.2/3.1.x/3.0.x updates
- Enable DC_FP on loongarch
- PCIe fix for RDNA2
- improve DC FAMS/SubVP support for better power management
- partition support for lots of engines
- Take NUMA into account when allocating memory
- Add new DRM_AMDGPU_WERROR config parameter to help with CI
- Initial SMU13 overdrive support
- Add support for new colorspace KMS API
- W=1 fixes
amdkfd:
- Query TTM mem limit rather than hardcoding it
- GC 9.4.3 partition support
- Handle NUMA for partitions
- Add debugger interface for enabling gdb
- Add KFD event age tracking
radeon:
- Fix possible UAF
i915:
- new getparam for PXP support
- GSC/MEI proxy driver
- Meteorlake display enablement
- avoid clearing preallocated framebuffers with TTM
- implement framebuffer mmap support
- Disable sampler indirect state in bindless heap
- Enable fdinfo for GuC backends
- GuC loading and firmware table handling fixes
- Various refactors for multi-tile enablement
- Define MOCS and PAT tables for MTL
- GSC/MEI support for Meteorlake
- PMU multi-tile support
- Large driver kernel doc cleanup
- Allow VRR toggling and arbitrary refresh rates
- Support async flips on linear buffers on display ver 12+
- Expose CRTC CTM property on ILK/SNB/VLV
- New debugfs for display clock frequencies
- Hotplug refactoring
- Display refactoring
- I915_GEM_CREATE_EXT_SET_PAT for Mesa on Meteorlake
- Use large rings for compute contexts
- HuC loading for MTL
- Allow user to set cache at BO creation
- MTL powermanagement enhancements
- Switch to dedicated workqueues to stop using flush_scheduled_work()
- Move display runtime init under display/
- Remove 10bit gamma on desktop gen3 parts, they don't support it
habanalabs:
- uapi: return 0 for user queries if there was a h/w or f/w error
- Add pci health check when we lose connection with the firmware.
This can be used to distinguish between pci link down and firmware
getting stuck.
- Add more info to the error print when TPC interrupt occur.
- Firmware fixes
msm:
- Adreno A660 bindings
- SM8350 MDSS bindings fix
- Added support for DPU on sm6350 and sm6375 platforms
- Implemented tearcheck support to support vsync on SM150 and newer
platforms
- Enabled missing features (DSPP, DSC, split display) on sc8180x,
sc8280xp, sm8450
- Added support for DSI and 28nm DSI PHY on MSM8226 platform
- Added support for DSI on sm6350 and sm6375 platforms
- Added support for display controller on MSM8226 platform
- A690 GPU support
- Move cmdstream dumping out of fence signaling path
- a610 support
- Support for a6xx devices without GMU
nouveau:
- NULL ptr before deref fixes
armada:
- implement fbdev emulation as client
sun4i:
- fix mipi-dsi dotclock
- release clocks
vc4:
- rgb range toggle property
- BT601 / BT2020 HDMI support
vkms:
- convert to drmm helpers
- add reflection and rotation support
- fix rgb565 conversion
gma500:
- fix iomem access
shmobile:
- support renesas soc platform
- enable fbdev
mxsfb:
- Add support for i.MX93 LCDIF
stm:
- dsi: Use devm_ helper
- ltdc: Fix potential invalid pointer deref
renesas:
- Group drivers in renesas subdirectory to prepare for new platform
- Drop deprecated R-Car H3 ES1.x support
meson:
- Add support for MIPI DSI displays
virtio:
- add sync object support
mediatek:
- Add display binding document for MT6795"
* tag 'drm-next-2023-06-29' of git://anongit.freedesktop.org/drm/drm: (1791 commits)
drm/i915: Fix a NULL vs IS_ERR() bug
drm/i915: make i915_drm_client_fdinfo() reference conditional again
drm/i915/huc: Fix missing error code in intel_huc_init()
drm/i915/gsc: take a wakeref for the proxy-init-completion check
drm/msm/a6xx: Add A610 speedbin support
drm/msm/a6xx: Add A619_holi speedbin support
drm/msm/a6xx: Use adreno_is_aXYZ macros in speedbin matching
drm/msm/a6xx: Use "else if" in GPU speedbin rev matching
drm/msm/a6xx: Fix some A619 tunables
drm/msm/a6xx: Add A610 support
drm/msm/a6xx: Add support for A619_holi
drm/msm/adreno: Disable has_cached_coherent in GMU wrapper configurations
drm/msm/a6xx: Introduce GMU wrapper support
drm/msm/a6xx: Move CX GMU power counter enablement to hw_init
drm/msm/a6xx: Extend and explain UBWC config
drm/msm/a6xx: Remove both GBIF and RBBM GBIF halt on hw init
drm/msm/a6xx: Add a helper for software-resetting the GPU
drm/msm/a6xx: Improve a6xx_bus_clear_pending_transactions()
drm/msm/a6xx: Move a6xx_bus_clear_pending_transactions to a6xx_gpu
drm/msm/a6xx: Move force keepalive vote removal to a6xx_gmu_force_off()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
- Yosry Ahmed brought back some cgroup v1 stats in OOM logs
- Yosry has also eliminated cgroup's atomic rstat flushing
- Nhat Pham adds the new cachestat() syscall. It provides userspace
with the ability to query pagecache status - a similar concept to
mincore() but more powerful and with improved usability
- Mel Gorman provides more optimizations for compaction, reducing the
prevalence of page rescanning
- Lorenzo Stoakes has done some maintanance work on the
get_user_pages() interface
- Liam Howlett continues with cleanups and maintenance work to the
maple tree code. Peng Zhang also does some work on maple tree
- Johannes Weiner has done some cleanup work on the compaction code
- David Hildenbrand has contributed additional selftests for
get_user_pages()
- Thomas Gleixner has contributed some maintenance and optimization
work for the vmalloc code
- Baolin Wang has provided some compaction cleanups,
- SeongJae Park continues maintenance work on the DAMON code
- Huang Ying has done some maintenance on the swap code's usage of
device refcounting
- Christoph Hellwig has some cleanups for the filemap/directio code
- Ryan Roberts provides two patch series which yield some
rationalization of the kernel's access to pte entries - use the
provided APIs rather than open-coding accesses
- Lorenzo Stoakes has some fixes to the interaction between pagecache
and directio access to file mappings
- John Hubbard has a series of fixes to the MM selftesting code
- ZhangPeng continues the folio conversion campaign
- Hugh Dickins has been working on the pagetable handling code, mainly
with a view to reducing the load on the mmap_lock
- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment
from 128 to 8
- Domenico Cerasuolo has improved the zswap reclaim mechanism by
reorganizing the LRU management
- Matthew Wilcox provides some fixups to make gfs2 work better with the
buffer_head code
- Vishal Moola also has done some folio conversion work
- Matthew Wilcox has removed the remnants of the pagevec code - their
functionality is migrated over to struct folio_batch
* tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits)
mm/hugetlb: remove hugetlb_set_page_subpool()
mm: nommu: correct the range of mmap_sem_read_lock in task_mem()
hugetlb: revert use of page_cache_next_miss()
Revert "page cache: fix page_cache_next/prev_miss off by one"
mm/vmscan: fix root proactive reclaim unthrottling unbalanced node
mm: memcg: rename and document global_reclaim()
mm: kill [add|del]_page_to_lru_list()
mm: compaction: convert to use a folio in isolate_migratepages_block()
mm: zswap: fix double invalidate with exclusive loads
mm: remove unnecessary pagevec includes
mm: remove references to pagevec
mm: rename invalidate_mapping_pagevec to mapping_try_invalidate
mm: remove struct pagevec
net: convert sunrpc from pagevec to folio_batch
i915: convert i915_gpu_error to use a folio_batch
pagevec: rename fbatch_count()
mm: remove check_move_unevictable_pages()
drm: convert drm_gem_put_pages() to use a folio_batch
i915: convert shmem_sg_free_table() to use a folio_batch
scatterlist: add sg_set_folio()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"There are three areas of note:
A bunch of strlcpy()->strscpy() conversions ended up living in my tree
since they were either Acked by maintainers for me to carry, or got
ignored for multiple weeks (and were trivial changes).
The compiler option '-fstrict-flex-arrays=3' has been enabled
globally, and has been in -next for the entire devel cycle. This
changes compiler diagnostics (though mainly just -Warray-bounds which
is disabled) and potential UBSAN_BOUNDS and FORTIFY _warning_
coverage. In other words, there are no new restrictions, just
potentially new warnings. Any new FORTIFY warnings we've seen have
been fixed (usually in their respective subsystem trees). For more
details, see commit df8fc4e934c12b.
The under-development compiler attribute __counted_by has been added
so that we can start annotating flexible array members with their
associated structure member that tracks the count of flexible array
elements at run-time. It is possible (likely?) that the exact syntax
of the attribute will change before it is finalized, but GCC and Clang
are working together to sort it out. Any changes can be made to the
macro while we continue to add annotations.
As an example of that last case, I have a treewide commit waiting with
such annotations found via Coccinelle:
https://git.kernel.org/linus/adc5b3cb48a049563dc673f348eab7b6beba8a9b
Also see commit dd06e72e68bcb4 for more details.
Summary:
- Fix KMSAN vs FORTIFY in strlcpy/strlcat (Alexander Potapenko)
- Convert strreplace() to return string start (Andy Shevchenko)
- Flexible array conversions (Arnd Bergmann, Wyes Karny, Kees Cook)
- Add missing function prototypes seen with W=1 (Arnd Bergmann)
- Fix strscpy() kerndoc typo (Arne Welzel)
- Replace strlcpy() with strscpy() across many subsystems which were
either Acked by respective maintainers or were trivial changes that
went ignored for multiple weeks (Azeem Shaikh)
- Remove unneeded cc-option test for UBSAN_TRAP (Nick Desaulniers)
- Add KUnit tests for strcat()-family
- Enable KUnit tests of FORTIFY wrappers under UML
- Add more complete FORTIFY protections for strlcat()
- Add missed disabling of FORTIFY for all arch purgatories.
- Enable -fstrict-flex-arrays=3 globally
- Tightening UBSAN_BOUNDS when using GCC
- Improve checkpatch to check for strcpy, strncpy, and fake flex
arrays
- Improve use of const variables in FORTIFY
- Add requested struct_size_t() helper for types not pointers
- Add __counted_by macro for annotating flexible array size members"
* tag 'hardening-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (54 commits)
netfilter: ipset: Replace strlcpy with strscpy
uml: Replace strlcpy with strscpy
um: Use HOST_DIR for mrproper
kallsyms: Replace all non-returning strlcpy with strscpy
sh: Replace all non-returning strlcpy with strscpy
of/flattree: Replace all non-returning strlcpy with strscpy
sparc64: Replace all non-returning strlcpy with strscpy
Hexagon: Replace all non-returning strlcpy with strscpy
kobject: Use return value of strreplace()
lib/string_helpers: Change returned value of the strreplace()
jbd2: Avoid printing outside the boundary of the buffer
checkpatch: Check for 0-length and 1-element arrays
riscv/purgatory: Do not use fortified string functions
s390/purgatory: Do not use fortified string functions
x86/purgatory: Do not use fortified string functions
acpi: Replace struct acpi_table_slit 1-element array with flex-array
clocksource: Replace all non-returning strlcpy with strscpy
string: use __builtin_memcpy() in strlcpy/strlcat
staging: most: Replace all non-returning strlcpy with strscpy
drm/i2c: tda998x: Replace all non-returning strlcpy with strscpy
...
|
|
Fixes the following gcc with W=1:
drivers/gpu/drm/radeon/radeon_atpx_handler.c:64:6: warning: no previous prototype for ‘radeon_has_atpx’ [-Wmissing-prototypes]
64 | bool 4(void) {
| ^~~~~~~~~~~~~~~
drivers/gpu/drm/radeon/radeon_atpx_handler.c:68:6: warning: no previous prototype for ‘radeon_has_atpx_dgpu_power_cntl’ [-Wmissing-prototypes]
68 | bool radeon_has_atpx_dgpu_power_cntl(void) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/radeon/radeon_atpx_handler.c:72:6: warning: no previous prototype for ‘radeon_is_atpx_hybrid’ [-Wmissing-prototypes]
72 | bool radeon_is_atpx_hybrid(void) {
| ^~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/radeon/radeon_atpx_handler.c:77:6: warning: no previous prototype for ‘radeon_atpx_dgpu_req_power_for_displays’ [-Wmissing-prototypes]
77 | bool radeon_atpx_dgpu_req_power_for_displays(void) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/radeon/radeon_atpx_handler.c:596:6: warning: no previous prototype for ‘radeon_register_atpx_handler’ [-Wmissing-prototypes]
596 | void radeon_register_atpx_handler(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/radeon/radeon_atpx_handler.c:614:6: warning: no previous prototype for ‘radeon_unregister_atpx_handler’ [-Wmissing-prototypes]
614 | void radeon_unregister_atpx_handler(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/radeon/radeon_atpx_handler.c:159: warning: expecting prototype for radeon_atpx_validate_functions(). Prototype was for radeon_atpx_validate() instead
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Disable the modesetting pipeline before release the radeon's fbdev
client. Fixes the following error:
[ 17.217408] WARNING: CPU: 5 PID: 1464 at drivers/gpu/drm/ttm/ttm_bo.c:326 ttm_bo_release+0x27e/0x2d0 [ttm]
[ 17.217418] Modules linked in: edac_mce_amd radeon(+) drm_ttm_helper ttm video drm_suballoc_helper drm_display_helper kvm irqbypass drm_kms_helper syscopyarea crc32_pclmul sysfillrect sha512_ssse3 sysimgblt sha512_generic cfbfillrect cfbimgblt wmi_bmof aesni_intel cfbcopyarea crypto_simd cryptd k10temp acpi_cpufreq wmi dm_mod
[ 17.217432] CPU: 5 PID: 1464 Comm: systemd-udevd Not tainted 6.4.0-rc4+ #1
[ 17.217436] Hardware name: Micro-Star International Co., Ltd. MS-7A38/B450M PRO-VDH MAX (MS-7A38), BIOS B.G0 07/26/2022
[ 17.217438] RIP: 0010:ttm_bo_release+0x27e/0x2d0 [ttm]
[ 17.217444] Code: 48 89 43 38 48 89 43 40 48 8b 5c 24 30 48 8b b5 40 08 00 00 48 8b 6c 24 38 48 83 c4 58 e9 7a 49 f7 e0 48 89 ef e9 6c fe ff ff <0f> 0b 48 83 7b 20 00 0f 84 b7 fd ff ff 0f 0b 0f 1f 00 e9 ad fd ff
[ 17.217448] RSP: 0018:ffffc9000095fbb0 EFLAGS: 00010202
[ 17.217451] RAX: 0000000000000001 RBX: ffff8881052c8de0 RCX: 0000000000000000
[ 17.217453] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8881052c8de0
[ 17.217455] RBP: ffff888104a66e00 R08: ffff8881052c8de0 R09: ffff888104a7cf08
[ 17.217457] R10: ffffc9000095fbe0 R11: ffffc9000095fbe8 R12: ffff8881052c8c78
[ 17.217458] R13: ffff8881052c8c78 R14: dead000000000100 R15: ffff88810528b108
[ 17.217460] FS: 00007f319fcbb8c0(0000) GS:ffff88881a540000(0000) knlGS:0000000000000000
[ 17.217463] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 17.217464] CR2: 000055dc8b0224a0 CR3: 000000010373d000 CR4: 0000000000750ee0
[ 17.217466] PKRU: 55555554
[ 17.217468] Call Trace:
[ 17.217470] <TASK>
[ 17.217472] ? __warn+0x97/0x160
[ 17.217476] ? ttm_bo_release+0x27e/0x2d0 [ttm]
[ 17.217481] ? report_bug+0x1ec/0x200
[ 17.217487] ? handle_bug+0x3c/0x70
[ 17.217490] ? exc_invalid_op+0x1f/0x90
[ 17.217493] ? preempt_count_sub+0xb5/0x100
[ 17.217496] ? asm_exc_invalid_op+0x16/0x20
[ 17.217500] ? ttm_bo_release+0x27e/0x2d0 [ttm]
[ 17.217505] ? ttm_resource_move_to_lru_tail+0x1ab/0x1d0 [ttm]
[ 17.217511] radeon_bo_unref+0x1a/0x30 [radeon]
[ 17.217547] radeon_gem_object_free+0x20/0x30 [radeon]
[ 17.217579] radeon_fbdev_fb_destroy+0x57/0x90 [radeon]
[ 17.217616] unregister_framebuffer+0x72/0x110
[ 17.217620] drm_client_dev_unregister+0x6d/0xe0
[ 17.217623] drm_dev_unregister+0x2e/0x90
[ 17.217626] drm_put_dev+0x26/0x90
[ 17.217628] pci_device_remove+0x44/0xc0
[ 17.217631] really_probe+0x257/0x340
[ 17.217635] __driver_probe_device+0x73/0x120
[ 17.217638] driver_probe_device+0x2c/0xb0
[ 17.217641] __driver_attach+0xa0/0x150
[ 17.217643] ? __pfx___driver_attach+0x10/0x10
[ 17.217646] bus_for_each_dev+0x67/0xa0
[ 17.217649] bus_add_driver+0x10e/0x210
[ 17.217651] driver_register+0x5c/0x120
[ 17.217653] ? __pfx_radeon_module_init+0x10/0x10 [radeon]
[ 17.217681] do_one_initcall+0x44/0x220
[ 17.217684] ? kmalloc_trace+0x37/0xc0
[ 17.217688] do_init_module+0x64/0x240
[ 17.217691] __do_sys_finit_module+0xb2/0x100
[ 17.217694] do_syscall_64+0x3b/0x90
[ 17.217697] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[ 17.217700] RIP: 0033:0x7f319feaa5a9
[ 17.217702] Code: 08 89 e8 5b 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 27 08 0d 00 f7 d8 64 89 01 48
[ 17.217706] RSP: 002b:00007ffc6bf3e7f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 17.217709] RAX: ffffffffffffffda RBX: 00005607204f3170 RCX: 00007f319feaa5a9
[ 17.217710] RDX: 0000000000000000 RSI: 00007f31a002eefd RDI: 0000000000000018
[ 17.217712] RBP: 00007f31a002eefd R08: 0000000000000000 R09: 00005607204f1860
[ 17.217714] R10: 0000000000000018 R11: 0000000000000246 R12: 0000000000020000
[ 17.217716] R13: 0000000000000000 R14: 0000560720522450 R15: 0000560720255899
[ 17.217718] </TASK>
[ 17.217719] ---[ end trace 0000000000000000 ]---
The buffer object backing the fbdev emulation got pinned twice: by the
fb_probe helper radeon_fbdev_create_pinned_object() and the modesetting
code when the framebuffer got displayed. It only got unpinned once by
the fbdev helper radeon_fbdev_destroy_pinned_object(). Hence TTM's BO-
release function complains about the pin counter. Forcing the outputs
off also undoes the modesettings pin increment.
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Reported-by: Borislav Petkov <bp@alien8.de>
Closes: https://lore.kernel.org/dri-devel/20230603174814.GCZHt83pN+wNjf63sC@fat_crate.local/
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: e317a69fe891 ("drm/radeon: Implement client-based fbdev emulation")
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.5-2023-06-02:
amdgpu:
- SR-IOV fixes
- Warning fixes
- Misc code cleanups and spelling fixes
- DCN 3.2 updates
- Improved DC FAMS support for better power management
- Improved DC SubVP support for better power management
- DCN 3.1.x fixes
- Max IB size query
- DC GPU reset fixes
- RAS updates
- DCN 3.0.x fixes
- S/G display fixes
- CP shadow buffer support
- Implement connector force callback
- Z8 power improvements
- PSP 13.0.10 vbflash support
- Mode2 reset fixes
- Store MQDs in VRAM to improve queue switch latency
- VCN 3.x fixes
- JPEG 3.x fixes
- Enable DC_FP on LoongArch
- GFXOFF fixes
- GC 9.4.3 partition support
- SDMA 4.4.2 partition support
- VCN/JPEG 4.0.3 partition support
- VCN 4.0.3 updates
- NBIO 7.9 updates
- GC 9.4.3 updates
- Take NUMA into account when allocating memory
- Handle NUMA for partitions
- SMU 13.0.6 updates
- GC 9.4.3 RAS updates
- Stop including unused swiotlb.h
- SMU 13.0.7 fixes
- Fix clock output ordering on some APUs
- Clean up DC FPGA code
- GFX9 preemption fixes
- Misc irq fixes
- S0ix fixes
- Add new DRM_AMDGPU_WERROR config parameter to help with CI
- PCIe fix for RDNA2
- kdoc fixes
- Documentation updates
amdkfd:
- Query TTM mem limit rather than hardcoding it
- GC 9.4.3 partition support
- Handle NUMA for partitions
radeon:
- Fix possible double free
- Stop including unused swiotlb.h
- Fix possible division by zero
ttm:
- Add query for TTM mem limit
- Add NUMA awareness to pools
- Export ttm_pool_fini()
UAPI:
- Add new ctx query flag to better handle GPU resets
Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22290
- Add new interface to query and set shadow buffer for RDNA3
Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21986
- Add new INFO query for max IB size
Proposed userspace: https://gitlab.freedesktop.org/bnieuwenhuizen/mesa/-/commits/ib-rejection-v3
amd-drm-next-6.5-2023-06-09:
amdgpu:
- S0ix fixes
- Initial SMU13 Overdrive support
- kdoc fixes
- Misc clode cleanups
- Flexible array fixes
- Display OTG fixes
- SMU 13.0.6 updates
- Revert some broken clock counter updates
- Misc display fixes
- GFX9 preemption fixes
- Add support for newer EEPROM bad page table format
- Add missing radeon secondary id
- Add support for new colorspace KMS API
- CSA fix
- Stable pstate fixes for APUs
- make vbl interface admin only
- Handle PCI accelerator class
amdkfd:
- Add debugger support for gdb
radeon:
- Fix possible UAF
drm:
- Add Colorspace functionality
UAPI:
- Add debugger interface for enabling gdb
Proposed userspace: https://github.com/ROCm-Developer-Tools/ROCdbgapi/tree/wip-dbgapi
- Add KMS colorspace API
Discussion: https://lists.freedesktop.org/archives/dri-devel/2023-June/408128.html
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230609174817.7764-1-alexander.deucher@amd.com
|
|
Disable the modesetting pipeline before release the radeon's fbdev
client. Fixes the following error:
[ 17.217408] WARNING: CPU: 5 PID: 1464 at drivers/gpu/drm/ttm/ttm_bo.c:326 ttm_bo_release+0x27e/0x2d0 [ttm]
[ 17.217418] Modules linked in: edac_mce_amd radeon(+) drm_ttm_helper ttm video drm_suballoc_helper drm_display_helper kvm irqbypass drm_kms_helper syscopyarea crc32_pclmul sysfillrect sha512_ssse3 sysimgblt sha512_generic cfbfillrect cfbimgblt wmi_bmof aesni_intel cfbcopyarea crypto_simd cryptd k10temp acpi_cpufreq wmi dm_mod
[ 17.217432] CPU: 5 PID: 1464 Comm: systemd-udevd Not tainted 6.4.0-rc4+ #1
[ 17.217436] Hardware name: Micro-Star International Co., Ltd. MS-7A38/B450M PRO-VDH MAX (MS-7A38), BIOS B.G0 07/26/2022
[ 17.217438] RIP: 0010:ttm_bo_release+0x27e/0x2d0 [ttm]
[ 17.217444] Code: 48 89 43 38 48 89 43 40 48 8b 5c 24 30 48 8b b5 40 08 00 00 48 8b 6c 24 38 48 83 c4 58 e9 7a 49 f7 e0 48 89 ef e9 6c fe ff ff <0f> 0b 48 83 7b 20 00 0f 84 b7 fd ff ff 0f 0b 0f 1f 00 e9 ad fd ff
[ 17.217448] RSP: 0018:ffffc9000095fbb0 EFLAGS: 00010202
[ 17.217451] RAX: 0000000000000001 RBX: ffff8881052c8de0 RCX: 0000000000000000
[ 17.217453] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8881052c8de0
[ 17.217455] RBP: ffff888104a66e00 R08: ffff8881052c8de0 R09: ffff888104a7cf08
[ 17.217457] R10: ffffc9000095fbe0 R11: ffffc9000095fbe8 R12: ffff8881052c8c78
[ 17.217458] R13: ffff8881052c8c78 R14: dead000000000100 R15: ffff88810528b108
[ 17.217460] FS: 00007f319fcbb8c0(0000) GS:ffff88881a540000(0000) knlGS:0000000000000000
[ 17.217463] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 17.217464] CR2: 000055dc8b0224a0 CR3: 000000010373d000 CR4: 0000000000750ee0
[ 17.217466] PKRU: 55555554
[ 17.217468] Call Trace:
[ 17.217470] <TASK>
[ 17.217472] ? __warn+0x97/0x160
[ 17.217476] ? ttm_bo_release+0x27e/0x2d0 [ttm]
[ 17.217481] ? report_bug+0x1ec/0x200
[ 17.217487] ? handle_bug+0x3c/0x70
[ 17.217490] ? exc_invalid_op+0x1f/0x90
[ 17.217493] ? preempt_count_sub+0xb5/0x100
[ 17.217496] ? asm_exc_invalid_op+0x16/0x20
[ 17.217500] ? ttm_bo_release+0x27e/0x2d0 [ttm]
[ 17.217505] ? ttm_resource_move_to_lru_tail+0x1ab/0x1d0 [ttm]
[ 17.217511] radeon_bo_unref+0x1a/0x30 [radeon]
[ 17.217547] radeon_gem_object_free+0x20/0x30 [radeon]
[ 17.217579] radeon_fbdev_fb_destroy+0x57/0x90 [radeon]
[ 17.217616] unregister_framebuffer+0x72/0x110
[ 17.217620] drm_client_dev_unregister+0x6d/0xe0
[ 17.217623] drm_dev_unregister+0x2e/0x90
[ 17.217626] drm_put_dev+0x26/0x90
[ 17.217628] pci_device_remove+0x44/0xc0
[ 17.217631] really_probe+0x257/0x340
[ 17.217635] __driver_probe_device+0x73/0x120
[ 17.217638] driver_probe_device+0x2c/0xb0
[ 17.217641] __driver_attach+0xa0/0x150
[ 17.217643] ? __pfx___driver_attach+0x10/0x10
[ 17.217646] bus_for_each_dev+0x67/0xa0
[ 17.217649] bus_add_driver+0x10e/0x210
[ 17.217651] driver_register+0x5c/0x120
[ 17.217653] ? __pfx_radeon_module_init+0x10/0x10 [radeon]
[ 17.217681] do_one_initcall+0x44/0x220
[ 17.217684] ? kmalloc_trace+0x37/0xc0
[ 17.217688] do_init_module+0x64/0x240
[ 17.217691] __do_sys_finit_module+0xb2/0x100
[ 17.217694] do_syscall_64+0x3b/0x90
[ 17.217697] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[ 17.217700] RIP: 0033:0x7f319feaa5a9
[ 17.217702] Code: 08 89 e8 5b 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 27 08 0d 00 f7 d8 64 89 01 48
[ 17.217706] RSP: 002b:00007ffc6bf3e7f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 17.217709] RAX: ffffffffffffffda RBX: 00005607204f3170 RCX: 00007f319feaa5a9
[ 17.217710] RDX: 0000000000000000 RSI: 00007f31a002eefd RDI: 0000000000000018
[ 17.217712] RBP: 00007f31a002eefd R08: 0000000000000000 R09: 00005607204f1860
[ 17.217714] R10: 0000000000000018 R11: 0000000000000246 R12: 0000000000020000
[ 17.217716] R13: 0000000000000000 R14: 0000560720522450 R15: 0000560720255899
[ 17.217718] </TASK>
[ 17.217719] ---[ end trace 0000000000000000 ]---
The buffer object backing the fbdev emulation got pinned twice: by the
fb_probe helper radeon_fbdev_create_pinned_object() and the modesetting
code when the framebuffer got displayed. It only got unpinned once by
the fbdev helper radeon_fbdev_destroy_pinned_object(). Hence TTM's BO-
release function complains about the pin counter. Forcing the outputs
off also undoes the modesettings pin increment.
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Reported-by: Borislav Petkov <bp@alien8.de>
Closes: https://lore.kernel.org/dri-devel/20230603174814.GCZHt83pN+wNjf63sC@fat_crate.local/
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: e317a69fe891 ("drm/radeon: Implement client-based fbdev emulation")
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Patch series "remove the vmas parameter from GUP APIs", v6.
(pin_/get)_user_pages[_remote]() each provide an optional output parameter
for an array of VMA objects associated with each page in the input range.
These provide the means for VMAs to be returned, as long as mm->mmap_lock
is never released during the GUP operation (i.e. the internal flag
FOLL_UNLOCKABLE is not specified).
In addition, these VMAs can only be accessed with the mmap_lock held and
become invalidated the moment it is released.
The vast majority of invocations do not use this functionality and of
those that do, all but one case retrieve a single VMA to perform checks
upon.
It is not egregious in the single VMA cases to simply replace the
operation with a vma_lookup(). In these cases we duplicate the (fast)
lookup on a slow path already under the mmap_lock, abstracted to a new
get_user_page_vma_remote() inline helper function which also performs
error checking and reference count maintenance.
The special case is io_uring, where io_pin_pages() specifically needs to
assert that the VMAs underlying the range do not result in broken
long-term GUP file-backed mappings.
As GUP now internally asserts that FOLL_LONGTERM mappings are not
file-backed in a broken fashion (i.e. requiring dirty tracking) - as
implemented in "mm/gup: disallow FOLL_LONGTERM GUP-nonfast writing to
file-backed mappings" - this logic is no longer required and so we can
simply remove it altogether from io_uring.
Eliminating the vmas parameter eliminates an entire class of danging
pointer errors that might have occured should the lock have been
incorrectly released.
In addition, the API is simplified and now clearly expresses what it is
intended for - applying the specified GUP flags and (if pinning) returning
pinned pages.
This change additionally opens the door to further potential improvements
in GUP and the possible marrying of disparate code paths.
I have run this series against gup_test with no issues.
Thanks to Matthew Wilcox for suggesting this refactoring!
This patch (of 6):
No invocation of get_user_pages() use the vmas parameter, so remove it.
The GUP API is confusing and caveated. Recent changes have done much to
improve that, however there is more we can do. Exporting vmas is a prime
target as the caller has to be extremely careful to preclude their use
after the mmap_lock has expired or otherwise be left with dangling
pointers.
Removing the vmas parameter focuses the GUP functions upon their primary
purpose - pinning (and outputting) pages as well as performing the actions
implied by the input flags.
This is part of a patch series aiming to remove the vmas parameter
altogether.
Link: https://lkml.kernel.org/r/cover.1684350871.git.lstoakes@gmail.com
Link: https://lkml.kernel.org/r/589e0c64794668ffc799651e8d85e703262b1e9d.1684350871.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Suggested-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Christian König <christian.koenig@amd.com> (for radeon parts)
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Sean Christopherson <seanjc@google.com> (KVM)
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Userspace can race to free the gobj(robj converted from), robj should not
be accessed again after drm_gem_object_put, otherwith it will result in
use-after-free.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Min Li <lm0963hack@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Function rv740_get_decoded_reference_divider() may return 0 due to
unpredictable reference divider value calculated in
radeon_atom_get_clock_dividers(). This will lead to
division-by-zero error once that value is used as a divider
in calculating 'clk_s'.
While unlikely, this issue should nonetheless be prevented so add a
sanity check for such cases by testing 'decoded_ref' value against 0.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
v2: minor coding style fixes (Alex)
In practice this should actually happen as the vbios should be
properly populated.
Fixes: 66229b200598 ("drm/radeon/kms: add dpm support for rv7xx (v4)")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
radeon does not need swiotlb.h, so stop including it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Put back the radeon_dp_work_func logic. It seems that
handling DP RX interrupts is necessary to make some
panels work. This was removed with the MST support,
but it regresses some systems so add it back. While
we are here, add the proper mutex locking.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2567
Fixes: 01ad1d9c2888 ("drm/radeon: Drop legacy MST support")
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
|
|
No need cast (void*) to (struct radeon_device *)
or (struct radeon_ring *).
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Userspace can race to free the gobj(robj converted from), robj should not
be accessed again after drm_gem_object_put, otherwith it will result in
use-after-free.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Min Li <lm0963hack@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use the regular fbdev helpers for framebuffer I/O instead of DRM's
helpers. Radeon does not use damage handling, so DRM's fbdev helpers
are mere wrappers around the fbdev code.
By using fbdev helpers directly within each DRM fbdev emulation,
we can eventually remove DRM's wrapper functions entirely.
v4:
* use initializer macros for struct fb_ops
v2:
* use FB_IO_HELPERS option
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230530151228.22979-7-tzimmermann@suse.de
|
|
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230522155032.2336283-1-azeemshaikh38@gmail.com
|
|
Put back the radeon_dp_work_func logic. It seems that
handling DP RX interrupts is necessary to make some
panels work. This was removed with the MST support,
but it regresses some systems so add it back. While
we are here, add the proper mutex locking.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2567
Fixes: 01ad1d9c2888 ("drm/radeon: Drop legacy MST support")
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
|
|
The type of size is unsigned, if size is 0x40000000, there will be an
integer overflow, size will be zero after size *= sizeof(uint32_t),
will cause uninitialized memory to be referenced later
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: hackyzh002 <hackyzh002@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Several calls to ci_dpm_fini() will attempt to free resources that
either have been freed before or haven't been allocated yet. This
may lead to undefined or dangerous behaviour.
For instance, if r600_parse_extended_power_table() fails, it might
call r600_free_extended_power_table() as will ci_dpm_fini() later
during error handling.
Fix this by only freeing pointers to objects previously allocated.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: cc8dbbb4f62a ("drm/radeon: add dpm support for CI dGPUs (v2)")
Co-developed-by: Natalia Petrova <n.petrova@fintech.ru>
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Make building fbdev emulation depend on DRM_FBDEV_EMULATION. Also
rename the source file to radeon_fbdev.c to align with other fbdev
files.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Implement fbdev emulation on top of struct drm_client and its helpers.
Replaces ad-hoc interfaces for restoring and closing fbdev emulation with
per-client callbacks for hotplugging, restoring and unregistering.
A single function, radeon_fbdev_setup(), starts fbdev emulation after
the DRM device has been registered. Hence, fbdev acts like a regular
DRM client.
The setup call prepares the fbdev emulation and invokes connector
hotplugging. The first successful hotplug event initializes fbdev
emulation with a framebuffer, device file, etc.
Unregistering depends on the hotplug status. Fully initialized emulation
is cleaned up through drm_fb_helper_unregister_info() and fb_destroy.
For prepared-only setups, unregistering unprepares the emulation and
releases all resources. In both cases, fbdev emulation will be cleaned
up.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Improve the fbdev probing function to fully clean up if it failed.
Allows to remove special cases from fb_destroy as well.
This change is reorders the operations within radeonfb_probe(). It
first allocates a buffer object, then builds a DRM framebuffer for
the object and finally creates the fbdev device. If every step
succeeded, the probe function clears the framebuffer memory. This
is the optimal order to rollback any changes if any of the steps
fails.
No functional changes.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fbdev calls struct fb_ops.fb_destroy after cleaning up the final
reference to an fbdev framebuffer. Move radeon's fbdev cleanup code
there.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix the coding style in several places in the fbdev-emulation
code. Also rename functions and structure file by comments. No
functional changes.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Move the helpers for creating and destroying fbdev GEM objects
to the top of the source file. Makes them available to fb_ops
functions. This will allow to implement framebuffer cleanup in
fb_destroy. No functional changes.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The screen_base field comes from the fbdev BO and contains the fbdev
framebuffer base address. We get the BO memory via radeon_bo_kmap(),
which already reports the error -ENOMEM if the buffer could not be
mapped. So remove the later test for screen_base, which will never
be NULL at this point.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Both data fields in struct radeon_fbdev, the framebuffer and the
device, are already available in struct drm_fb_helper. Simplify
radeon by converting all callers and removing struct radeon_fbdev.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Look up the framebuffer GEM object in fbdev object test with the
respective helper drm_gem_fb_get_obj(). The look-up helper warns if
no GEM object has been installed. Upcasting types prevents runtime
type checking, so avoid upcast to struct radeon_bo.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Move radeon_align_pitch() next to its caller in the dumb-buffer
code. Removes the only dependency on the radeon's fbdev source file
that is not related to fbdev emulation. No functional changes.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.4-rc1:
Note: Only changes since pull request from 2023-02-23 are included here.
UAPI Changes:
- Convert rockchip bindings to YAML.
- Constify kobj_type structure in dma-buf.
- FBDEV cmdline parser fixes, and other small fbdev fixes for mode
parsing.
Cross-subsystem Changes:
- Add Neil Armstrong as linaro maintainer.
- Actually signal the private stub dma-fence.
Core Changes:
- Add function for adding syncobj dep to sched_job and use it in panfrost, v3d.
- Improve DisplayID 2.0 topology parsing and EDID parsing in general.
- Add a gem eviction function and callback for generic GEM shrinker
purposes.
- Prepare to convert shmem helper to use the GEM reservation lock instead of own
locking. (Actual commit itself got reverted for now)
- Move the suballocator from radeon and amdgpu drivers to core in preparation
for Xe.
- Assorted small fixes and documentation.
- Fixes to HPD polling.
- Assorted small fixes in simpledrm, bridge, accel, shmem-helper,
and the selftest of format-helper.
- Remove dummy resource when ttm bo is created, and during pipelined
gutting. Fix all drivers to accept a NULL ttm_bo->resource.
- Handle pinned BO moving prevention in ttm core.
- Set drm panel-bridge orientation before connector is registered.
- Remove dumb_destroy callback.
- Add documentation to GEM_CLOSE, PRIME_HANDLE_TO_FD, PRIME_FD_TO_HANDLE, GETFB2 ioctl's.
- Add atomic enable_plane callback, use it in ast, mgag200, tidss.
Driver Changes:
- Use drm_gem_objects_lookup in vc4.
- Assorted small fixes to virtio, ast, bridge/tc358762, meson, nouveau.
- Allow virtio KMS to be disabled and compiled out.
- Add Radxa 8/10HD, Samsung AMS495QA01 panels.
- Fix ivpu compiler errors.
- Assorted fixes to drm/panel, malidp, rockchip, ivpu, amdgpu, vgem,
nouveau, vc4.
- Assorted cleanups, simplifications and fixes to vmwgfx.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ac1f5186-54bb-02f4-ac56-907f5b76f3de@linux.intel.com
|
|
Apple iMac11,2 (mid 2010) also with Radeon HD-4670 that has the same
issue as iMac10,1 (late 2009) where the internal eDP panel stays dark on
driver load. This patch treats iMac11,2 the same as iMac10,1,
so the eDP panel stays active.
Additional steps:
Kernel boot parameter radeon.nomodeset=0 required to keep the eDP
panel active.
This patch is an extension of
commit 564d8a2cf3ab ("drm/radeon: Fix eDP for single-display iMac10,1 (v2)")
Link: https://lore.kernel.org/all/lsq.1507553064.833262317@decadent.org.uk/
Signed-off-by: Mark Hawrylak <mark.hawrylak@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Use the generic suballocation helper for radeon.
v3:
- Select the suballoc helper in Kconfig (Thomas).
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Co-developed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230224095152.30134-4-thomas.hellstrom@linux.intel.com
|
|
The ttm bo now initially has NULL bo->resource, and leaves the driver
the handle that. However it looks like we forgot to handle that for
radeon. It looks like this will just null-ptr-deref in
radeon_bo_move(), if bo->resource is NULL.
Fix this by calling move_null().
Fixes: 180253782038 ("drm/ttm: stop allocating dummy resources during BO creation")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230208145319.397235-4-matthew.auld@intel.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
Move drm_fb_helper_unprepare() from drm_fb_helper_fini() into the
calling fbdev implementation. Avoids a possible stale mutex with
generic fbdev code.
As indicated by its name, drm_fb_helper_prepare() prepares struct
drm_fb_helper before setting up the fbdev support with a call to
drm_fb_helper_init(). In legacy fbdev emulation, this happens next
to each other. If successful, drm_fb_helper_fini() later tear down
the fbdev device and also unprepare via drm_fb_helper_unprepare().
Generic fbdev emulation prepares struct drm_fb_helper immediately
after allocating the instance. It only calls drm_fb_helper_init()
as part of processing a hotplug event. If the hotplug-handling fails,
it runs drm_fb_helper_fini(). This unprepares the fb-helper instance
and the next hotplug event runs on stale data.
Solve this by moving drm_fb_helper_unprepare() from drm_fb_helper_fini()
into the fbdev implementations. Call it right before freeing the
fb-helper instance.
Fixes: 643231b28380 ("drm/fbdev-generic: Minimize hotplug error handling")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230216140620.17699-1-tzimmermann@suse.de
|
|
We have checks for this in the individual drivers move callback, but
it's probably better to generally forbid that on a higher level.
Also stops exporting ttm_resource_compat() since that's not necessary
any more after removing the extra checks in vmwgfx.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230130120636.63765-6-matthew.auld@intel.com
|
|
Initialize the fb-helper's preferred_bpp field early from within
drm_fb_helper_prepare(); instead of the later client hot-plugging
callback. This simplifies the generic fbdev setup function.
No real changes, but all drivers' fbdev code has to be adapted.
v3:
* build with CONFIG_DRM_FBDEV_EMULATION unset (kernel test bot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125200415.14123-7-tzimmermann@suse.de
|
|
This reverts commit b49323aa35d502b0d9a7950327f30a1a52eae534.
This still seems to break i915.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125155023.105584-1-christian.koenig@amd.com
|
|
We have checks for this in the individual drivers move callback, but
it's probably better to generally forbid that on a higher level.
Also stops exporting ttm_resource_compat() since that's not necessary
any more after removing the extra checks in vmwgfx.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230124125726.13323-4-christian.koenig@amd.com
|
|
Backmerging into drm-misc-next to get DRM accelerator infrastructure,
which is required by ipuv driver.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Replace deprecated DRM_DEBUG_KMS_RATELIMITED() and DRM_ERROR()
with proper APIs.
v2: replace pr_err with dev_err(Alex).
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117180417.21066-1-nirmoy.das@intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
Several source files include drm_crtc_helper.h without needing it or
only to get its transitive include statements; leading to unnecessary
compile-time dependencies.
Directly include required headers and drop drm_crtc_helper.h where
possible.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230116131235.18917-15-tzimmermann@suse.de
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.3:
UAPI Changes:
* fourcc: Document Open Source user waiver
Cross-subsystem Changes:
* firmware: fix color-format selection for system framebuffers
Core Changes:
* format-helper: Add conversion from XRGB8888 to various sysfb formats;
Make XRGB8888 the only driver-emulated legacy format
* fb-helper: Avoid blank consoles from selecting an incorrect color format
* probe-helper: Enable/disable HPD on connectors plus driver updates
* Use drm_dbg_ helpers in several places
* docs: Document defaults for CRTC backgrounds; Document use of drm_minor
Driver Changes:
* arm/hdlcd: Use new debugfs helpers
* gud: Use new debugfs helpers
* panel: Support Visionox VTDR6130 AMOLED DSI; Support Himax HX8394; Convert
many drivers to common generic DSI write-sequence helper
* v3d: Do not opencode drm_gem_object_lookup()
* vc4: Various HVS an CRTC fixes
* vkms: Fix SEGFAULT from incorrect GEM-buffer mapping
* Convert various drivers to i2c probe_new()
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y8ADeSzZDj+tpibF@linux-uq9g
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.3-2023-01-13:
amdgpu:
- Fix possible segfault in failure case
- Rework FW requests to happen in early_init for all IPs so
that we don't lose the sbios console if FW is missing
- PSR fixes
- Misc cleanups
- Unload fix
- SMU13 fixes
amdkfd:
- Fix for cleared VRAM BOs
- Fix cleanup if GPUVM creation fails
- Memory accounting fix
- Use resource_size rather than open codeing it
- GC11 mGPU fix
radeon:
- Fix memory leak on shutdown
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230113225911.7776-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.3-2023-01-06:
amdgpu:
- secure display support for multiple displays
- DML optimizations
- DCN 3.2 updates
- PSR updates
- DP 2.1 updates
- SR-IOV RAS updates
- VCN RAS support
- SMU 13.x updates
- Switch 1 element arrays to flexible arrays
- Add RAS support for DF 4.3
- Stack size improvements
- S0ix rework
- Soft reset fix
- Allow 0 as a vram limit on APUs
- Display fixes
- Misc code cleanups
- Documentation fixes
- Handle profiling modes for SMU13.x
amdkfd:
- Error handling fixes
- PASID fixes
radeon:
- Switch 1 element arrays to flexible arrays
drm:
- Add DP adaptive sync DPCD definitions
UAPI:
- Add new INFO queries for peak and min sclk/mclk for profile modes on newer chips
Proposed mesa patch: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/278
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230106222037.7870-1-alexander.deucher@amd.com
|
|
Including <drm/drm_fb_helper.h> is not required, so remove the include
statements. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230111130206.29974-11-tzimmermann@suse.de
|
|
Fix coding style. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230111130206.29974-10-tzimmermann@suse.de
|
|
Include <linux/backlight.h> in source files that need it. Some of
DRM's source code gets the backlight header via drm_crtc_helper.h
and <linux/fb.h>, which can leed to unnecessary recompilation. If
possible, do not include drm_crtc_helper.h any longer.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Christian König <christian.koenig@amd.com> # amd
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230111130206.29974-2-tzimmermann@suse.de
|
|
Generic fbdev drivers use the apertures field in struct fb_info to
control ownership of the framebuffer memory and graphics device. Do
not set the values in radeon.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219160516.23436-6-tzimmermann@suse.de
|
|
While working on a drm driver that doesn't need the i2c algobit stuff I
noticed that DRM selects this code even though only 8 drivers actually use
it. While also only some drivers use i2c, keep the select for I2C for the
next cleanup patch. Still prepare this already by also selecting I2C for
the individual drivers.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219083627.1401627-1-u.kleine-koenig@pengutronix.de
|