summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/rcar-du/rcar_du_drv.c
AgeCommit message (Collapse)Author
2017-12-04drm: rcar-du: Implement system suspend/resume supportKieran Bingham
To support system suspend operations we must ensure the hardware is stopped, and resumed explicitly from the suspend and resume handlers. Implement suspend and resume functions using the DRM atomic helper functions. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2017-12-04drm: rcar-du: Add R8A7745 supportFabrizio Castro
Add support for the R8A7745 DU (which is very similar to the R8A7794 DU); it has 2 RGB outputs. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2017-12-04drm: rcar-du: Add R8A7743 supportFabrizio Castro
Add support for the R8A7743 DU (which is very similar to the R8A7791 DU); it has 1 DPAD (RGB) output and 1 LVDS output. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2017-08-10Merge tag 'drm-misc-next-2017-08-08' of ↵Dave Airlie
git://anongit.freedesktop.org/git/drm-misc into drm-next UAPI Changes: - vc4: Add ioctl to allow attaching a label to a bo (Eric) - Add new format/modifier blob plane property (Ben) - armada: Use __u32/__u64 instead of uint32_t/uint64_t (Mikko) - [kinda uapi] fb_helper: Expose display_info size via fb_info (David) Core Changes: - Default gem_dumb_[map_offset|destroy] as mmap/destroy implementations (Noralf) - Simplify atomic properties by removing the helpers and handling in core (Daniel) Driver Changes: - stm: Add STM32 DSI controller driver (Phillipe) - vc4: Add HDMI CEC support (Hans) - rockchip: Refactor register init & soc version handling (Mark) - misc: Remove .load_lut, .gamma_set, .gamma_get dead code (Peter) - dw-hdmi: Add HDMI CEC support (Russell) Cc: Philippe CORNU <philippe.cornu@st.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Eric Anholt <eric@anholt.net> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Mark yao <mark.yao@rock-chips.com> Cc: Peter Rosin <peda@axentia.se> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: David Lechner <david@lechnology.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> * tag 'drm-misc-next-2017-08-08' of git://anongit.freedesktop.org/git/drm-misc: (107 commits) drm: Nuke drm_atomic_legacy_backoff drm: Nuke drm_atomic_helper_connector_dpms drm: Nuke drm_atomic_helper_connector_set_property drm: Nuke drm_atomic_helper_plane_set_property drm: Nuke drm_atomic_helper_crtc_set_property drm: Handle properties in the core for atomic drivers drm: Don't update property values for atomic drivers drm/omap: Rework the rotation-on-crtc hack drm/radeon: Use the drm_driver.dumb_destroy default drm/i915: Use the drm_driver.dumb_destroy default drm/sti: Use .dumb_map_offset and .dumb_destroy defaults drm: bridge: synopsys/dw-hdmi: Provide default configuration function for HDMI 2.0 PHY drm/fb-helper: pass physical dimensions to fbdev uapi drm/armada_drm.h: use __u32 and __u64 instead of uint32_t and uint64_t drm/bridge: dw-hdmi: remove CEC engine register definitions drm/bridge: dw-hdmi: add cec driver drm/bridge: dw-hdmi: add missing cec_notifier_put drm: remove unused and redundant callbacks staging: vboxvideo: remove dead gamma lut code drm: dw-hdmi-i2s: add missing company name on Copyright ...
2017-08-03drm: rcar-du: Add HDMI outputs to R8A7796 device descriptionLaurent Pinchart
Update the device description with the HDMI output. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2017-08-03drm: rcar-du: Fix comments to comply with the kernel coding styleLaurent Pinchart
To avoid mixing comment styles when new comments complying with the kernel coding style are introduced, fix all multiline comments in one go. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2017-07-29drm/rcar-du: Use .dumb_map_offset and .dumb_destroy defaultsNoralf Trønnes
This driver can use the drm_driver.dumb_destroy and drm_driver.dumb_map_offset defaults, so no need to set them. Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-14-git-send-email-noralf@tronnes.org
2017-04-04drm: rcar-du: Add HDMI outputs to R8A7795 device descriptionKoji Matsuoka
Update the device description with the two available HDMI outputs. Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2017-04-04drm: rcar-du: Add DPLL supportKoji Matsuoka
The implementation hardcodes a workaround for the H3 ES1.x SoC regardless of the SoC revision, as the workaround can be safely applied on all devices in the Gen3 family without any side effect. Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2017-04-04drm: rcar-du: Hardcode encoders types to DRM_MODE_ENCODER_NONELaurent Pinchart
Unlike the connector type, the encoder type is unused by userspace. As it is equally unused in the driver, except in a single location where the connector type can be used instead, hardcode it to DRM_MODE_ENCODER_NONE. This allow removing all code that tries to determine (unsuccessfully in case a bridge is used) the encoder type. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2017-04-04drm: rcar-du: Remove wait field from rcar_du_device structureLaurent Pinchart
The field is a left-over from the switch to the atomic commit helper. It's unused, remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2017-04-04drm: rcar-du: Don't open code of_device_get_match_data()Wolfram Sang
This change will also make Coverity happy by avoiding a theoretical NULL pointer dereference; yet another reason is to use the above helper function to tighten the code and make it more readable. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2017-03-14drm: Create DEFINE_DRM_GEM_CMA_FOPS and roll it out to driversDaniel Vetter
Less code ftw. This converts all drivers except the tinydrm helper module. That one needs more work, since it gets the THIS_MODULE reference from tinydrm.ko instead of the actual driver module like it should. Probably needs a similar trick like I used here with generating the entire struct with a macro. Cc: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170308141257.12119-24-daniel.vetter@ffwll.ch
2017-02-09drm: rcar-du: use vblank hooks in struct drm_crtc_funcsShawn Guo
The vblank hooks in struct drm_driver are deprecated and only meant for legacy drivers. For modern drivers with DRIVER_MODESET flag, the hooks in struct drm_crtc_funcs should be used instead. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: http://patchwork.freedesktop.org/patch/msgid/1486458995-31018-17-git-send-email-shawnguo@kernel.org
2017-02-07drm: remove drm_vblank_no_hw_counter assignment from driver codeShawn Guo
Core code already makes drm_driver.get_vblank_counter hook optional by letting drm_vblank_no_hw_counter be the default implementation for the function hook. So the drm_vblank_no_hw_counter assignment in the driver code becomes redundant and can be removed now. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Stefan Agner <stefan@agner.ch> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: CK Hu <ck.hu@mediatek.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: Eric Anholt <eric@anholt.net> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1486458995-31018-3-git-send-email-shawnguo@kernel.org
2016-11-16Merge branch 'drm/next/du' of git://linuxtv.org/pinchartl/media into drm-nextDave Airlie
rcar-du -next branch. * 'drm/next/du' of git://linuxtv.org/pinchartl/media: drm: rcar-du: Fix LVDS start sequence on Gen3 drm: rcar-du: Fix H/V sync signal polarity configuration drm: rcar-du: Fix display timing controller parameter drm: rcar-du: Fix dot clock routing configuration drm: rcar-du: Add R8A7796 support drm: rcar-du: Add R8A7792 support drm: rcar-du: Simplify and fix probe error handling drm: rcar-du: Fix crash in encoder failure error path drm: rcar-du: Remove memory allocation error message drm: rcar-du: Remove test for impossible error condition drm: rcar-du: Bring HDMI encoder comments in line with the driver drm: rcar-du: Constify node argument to rcar_du_lvds_connector_init() video: of: Constify node argument to display timing functions
2016-11-15drm: rcar-du: Add R8A7796 supportLaurent Pinchart
Document the R8A7796-specific DT bindings and support them in the driver. The HDMI output is currently not supported. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-11-15drm: rcar-du: Add R8A7792 supportSergei Shtylyov
Add support for the R8A7792 DU; it has 2 DPAD (RGB) outputs. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-11-15drm: rcar-du: Simplify and fix probe error handlingLaurent Pinchart
It isn't safe to call drm_dev_unregister() without first initializing mode setting with drm_mode_config_init(). This leads to a crash if either IO memory can't be remapped or vblank initialization fails. Fix this by reordering the initialization sequence. Move vblank initialization after the drm_mode_config_init() call, and move IO remapping before drm_dev_alloc() to avoid the need to perform clean up in case of failure. While at it remove the explicit drm_vblank_cleanup() call from rcar_du_remove() as the drm_dev_unregister() function already cleans up vblank. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-11-14drm: rcar-du: Remove test for impossible error conditionLaurent Pinchart
The driver has lost platform data support a long time ago. R-Car DU devices can only be instantiated through DT now, making it impossible to have a NULL DT node pointer. Remove the error check. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2016-11-02drm: define drm_compat_ioctl NULL on CONFIG_COMPAT=n and reduce #ifdefsJani Nikula
If we define drm_compat_ioctl NULL on CONFIG_COMPAT=n, we don't have to check for the config everywhere. Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1478014844-27454-1-git-send-email-jani.nikula@intel.com
2016-09-22drm: Don't swallow error codes in drm_dev_alloc()Tom Gundersen
There are many reasons other than ENOMEM that drm_dev_init() can fail. Return ERR_PTR rather than NULL to be able to distinguish these in the caller. Signed-off-by: Tom Gundersen <teg@jklm.no> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20160921145919.13754-2-teg@jklm.no
2016-06-24Merge branch 'drm/next/du' of git://linuxtv.org/pinchartl/media into drm-nextDave Airlie
some rcar-du fixes. * 'drm/next/du' of git://linuxtv.org/pinchartl/media: drm: rcar-du: error message is not needed for EPROBE_DEFER drm: rcar-du: error message is not needed for drm_vblank_init() rcar-du: add/rename DEFR6 TCON bits
2016-06-21drm: Don't call drm_dev_set_unique from platform driversDaniel Vetter
Since commit e112e593b215c394c0303dbf0534db0928e87967 Author: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Date: Fri Dec 11 11:20:28 2015 +0100 drm: use dev_name as default unique name in drm_dev_alloc() we're using a reasonable default which should work for everyone. Only mtk, rcar-du and sun4i are affected, and as kms-only drivers without any rendering support no one should ever care about the unique name v2: Rebase on top of mediatek. Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Emil Velikov <emil.l.velikov@gmail.com> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1466499262-18717-5-git-send-email-daniel.vetter@ffwll.ch
2016-06-21drm/rcar-du: Remove redundant calls to drm_connector_register_all()Chris Wilson
Up to now, the recommendation was for drivers to call drm_dev_register() followed by drm_connector_register_all(). Now that drm_connector_register() is safe against multiple invocations, we can move drm_connector_register_all() to drm_dev_register() and not suffer from any backwards compatibility issues with drivers not following the more rigorous init ordering. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Tested-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1466151923-1572-8-git-send-email-chris@chris-wilson.co.uk
2016-06-20drm: rcar-du: error message is not needed for EPROBE_DEFERKuninori Morimoto
EPROBE_DEFER is not error, thus, error message on kernel log on this case is confusable. Print it only error cases Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-06-20drm: rcar-du: error message is not needed for drm_vblank_init()Kuninori Morimoto
The only reason drm_vblank_init() could return an error at the moment is a kcalloc() failure. So we can remove current error message completely. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-06-01drm/rcar-du: Use lockless gem BO free callbackDaniel Vetter
No dev->struct_mutex anywhere to be seen. Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1464630800-30786-11-git-send-email-daniel.vetter@ffwll.ch
2016-04-24drm: rcar-du: Fix compilation warningLaurent Pinchart
Commit d63c25e4245a ("drm: rcar-du: Use generic drm_connector_register_all() helper") left an unused local variable behind. Remove it. Fixes: d63c25e4245a ("drm: rcar-du: Use generic drm_connector_register_all() helper") Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-04-20drm: rcar-du: Use generic drm_connector_register_all() helperAlexey Brodkin
Now that a generic drm_connector_register_all() helper exists we may safely substitute it for the driver-specific implementation of connectors plugging in sysfs. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: linux-renesas-soc@vger.kernel.org Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1461068693-11260-4-git-send-email-abrodkin@synopsys.com
2016-03-29drm: Rename drm_connector_unplug_all() to drm_connector_unregister_all()Alexey Brodkin
Current name is a bit misleading because what that helper function really does it calls drm_connector_unregister() for all connectors. This all has nothing to do with hotplugging so let's name things properly. And while at it remove potentially dangerous locking around drm_connector_unregister() in rcar_du_remove() as mentioned in kerneldoc for drm_connector_unregister_all(). Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: linux-renesas-soc@vger.kernel.org Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1458722577-20283-2-git-send-email-abrodkin@synopsys.com
2016-02-23drm: rcar-du: lvds: Add R-Car Gen3 supportKoji Matsuoka
The LVDS encoder differs slightly in Gen3 SoCs in its PLL configuration. Add support for the Gen3 LVDS PLL parameters and startup procedure. Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-23drm: rcar-du: Add R8A7795 device supportLaurent Pinchart
Document the R8A7795-specific DT bindings and support them in the driver. The HDMI and LVDS outputs are currently not supported. Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-20drm: rcar-du: Perform initialization/cleanup at probe/remove timeLaurent Pinchart
The drm driver .load() operation is prone to race conditions as it initializes the driver after registering the device nodes. Its usage is deprecated, inline it in the probe function and call drm_dev_alloc() and drm_dev_register() explicitly. For consistency inline the .unload() handler in the remove function as well. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-02-08drm/rcar: Nuke preclose hookDaniel Vetter
Again since the drm core takes care of event unlinking/disarming this is now just needless code. Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1453756616-28942-10-git-send-email-daniel.vetter@ffwll.ch
2015-10-21drm: rcar-du: Add support for the R8A7794 DULaurent Pinchart
The R8A7794 DU has a fixed output routing configuration with one RGB output per CRTC and thus lacks the RGB output routing register field. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2015-10-21drm: rcar-du: Add support for the R8A7793 DULaurent Pinchart
The R8A7793 DU is identical to the R8A7791 and thus only requires a new DT compatible string. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2015-10-20drm: rcar-du: Enable DU0 to DPAD connection on R8A7791Laurent Pinchart
The DPAD RGB output can be driven by both DU0 and DU1 on R8A7791. Mark the DU0 connection as possible. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2015-10-20drm: rcar-du: Add dependency on OFLaurent Pinchart
The driver requires OF support, add a dependency in Kconfig and remove the platform_device_id table that isn't used anymore. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-10-20drm: rcar-du: Remove obsolete rcar-du-r8a779x platform_device_id entriesGeert Uytterhoeven
Since commit a483dcbfa21f919c ("ARM: shmobile: lager: Remove legacy board support"), R-Car Gen2 SoCs are only supported in generic DT-only ARM multi-platform builds. The driver doesn't need to match platform devices by name anymore, hence remove the corresponding platform_device_id entry. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2015-10-07drm: Stop using drm_vblank_count() as the hw frame counterVille Syrjälä
drm_vblank_count() returns the software counter. We should not pretend it's the hw counter since we use the hw counter to figuere out what the software counter value should be. So instead provide a new function drm_vblank_no_hw_counter() for drivers that don't have a real hw counter. The new function simply returns 0, which is about the only thing it can do. Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Vincent Abriou <vincent.abriou@st.com> [danvet: s/int pipe/unsigned int pipe/ to follow Thierry's interface change.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-10-06drm/irq: Use unsigned int pipe in public APIThierry Reding
This continues the pattern started in commit cc1ef118fc09 ("drm/irq: Make pipe unsigned and name consistent"). This is applied to the public APIs and driver callbacks, so pretty much all drivers need to be updated to match the new prototypes. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Inki Dae <inki.dae@samsung.com> Cc: Jianwei Wang <jianwei.wang.chn@gmail.com> Cc: Alison Wang <alison.wang@freescale.com> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: David Airlie <airlied@linux.ie> Cc: Rob Clark <robdclark@gmail.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-06-16drm: rcar-du: Print the error value when DRM/KMS init failsLaurent Pinchart
This helps debugging probe failures. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2015-03-19drm: rcar-du: Enable the atomic updates APILaurent Pinchart
Set the DRIVER_ATOMIC flag to enable usage of the atomic updates API with the driver. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2015-03-03drm: rcar-du: Implement asynchronous commit supportLaurent Pinchart
Implement a custom .atomic_commit() handler that supports asynchronous commits using a work queue. This can be used for userspace-driven asynchronous commits, as well as for an atomic page flip implementation. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2015-03-03drm: rcar-du: Turn vblank on/off when enabling/disabling CRTCLaurent Pinchart
The DRM core vblank handling mechanism requires drivers to forcefully turn vblank reporting off when disabling the CRTC, and to restore the vblank reporting status when enabling the CRTC. Implement this using the drm_crtc_vblank_on/off helpers. When disabling vblank we must first wait for page flips to complete, so implement page flip completion wait as well. Finally, drm_crtc_vblank_off() must be called at startup to synchronize the state of the vblank core code with the hardware, which is initially disabled. This is performed at CRTC creation time, requiring vertical blanking to be initialized before creating CRTCs. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2015-01-21Merge branch 'drm/next/du' of git://linuxtv.org/pinchartl/fbdev into drm-nextDave Airlie
* 'drm/next/du' of git://linuxtv.org/pinchartl/fbdev: drm: rcar-du: Implement support for interlaced modes drm: rcar-du: Clamp DPMS states to on and off drm: rcar-du: Enable hotplug detection on HDMI connector drm: rcar-du: Output HSYNC instead of CSYNC drm: rcar-du: Add support for external pixel clock drm: rcar-du: Refactor DEFR8 feature drm: rcar-du: Remove LVDS and HDMI encoders chaining restriction drm: rcar-du: Configure pitch for chroma plane of multiplanar formats drm: rcar-du: Don't fail probe in case of partial encoder init error drm: adv7511: Remove interlaced mode check
2014-12-23drm: rcar-du: Refactor DEFR8 featureLaurent Pinchart
Rename the feature from RCAR_DU_FEATURE_DEFR8 to RCAR_DU_FEATURE_EXT_CTRL_REGS to cover all extended control registers in addition to the DEFR8 register. Usage of the feature is refactored to optimize runtime operation and prepare for external clock support. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2014-12-15Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm updates from Dave Airlie: "Highlights: - AMD KFD driver merge This is the AMD HSA interface for exposing a lowlevel interface for GPGPU use. They have an open source userspace built on top of this interface, and the code looks as good as it was going to get out of tree. - Initial atomic modesetting work The need for an atomic modesetting interface to allow userspace to try and send a complete set of modesetting state to the driver has arisen, and been suffering from neglect this past year. No more, the start of the common code and changes for msm driver to use it are in this tree. Ongoing work to get the userspace ioctl finished and the code clean will probably wait until next kernel. - DisplayID 1.3 and tiled monitor exposed to userspace. Tiled monitor property is now exposed for userspace to make use of. - Rockchip drm driver merged. - imx gpu driver moved out of staging Other stuff: - core: panel - MIPI DSI + new panels. expose suggested x/y properties for virtual GPUs - i915: Initial Skylake (SKL) support gen3/4 reset work start of dri1/ums removal infoframe tracking fixes for lots of things. - nouveau: tegra k1 voltage support GM204 modesetting support GT21x memory reclocking work - radeon: CI dpm fixes GPUVM improvements Initial DPM fan control - rcar-du: HDMI support added removed some support for old boards slave encoder driver for Analog Devices adv7511 - exynos: Exynos4415 SoC support - msm: a4xx gpu support atomic helper conversion - tegra: iommu support universal plane support ganged-mode DSI support - sti: HDMI i2c improvements - vmwgfx: some late fixes. - qxl: use suggested x/y properties" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (969 commits) drm: sti: fix module compilation issue drm/i915: save/restore GMBUS freq across suspend/resume on gen4 drm: sti: correctly cleanup CRTC and planes drm: sti: add HQVDP plane drm: sti: add cursor plane drm: sti: enable auxiliary CRTC drm: sti: fix delay in VTG programming drm: sti: prepare sti_tvout to support auxiliary crtc drm: sti: use drm_crtc_vblank_{on/off} instead of drm_vblank_{on/off} drm: sti: fix hdmi avi infoframe drm: sti: remove event lock while disabling vblank drm: sti: simplify gdp code drm: sti: clear all mixer control drm: sti: remove gpio for HDMI hot plug detection drm: sti: allow to change hdmi ddc i2c adapter drm/doc: Document drm_add_modes_noedid() usage drm/i915: Remove '& 0xffff' from the mask given to WA_REG() drm/i915: Invert the mask and val arguments in wa_add() and WA_REG() drm: Zero out DRM object memory upon cleanup drm/i915/bdw: Fix the write setting up the WIZ hashing mode ...
2014-11-26drm: rcar-du: Remove platform data supportLaurent Pinchart
All platforms now instantiate the DU through DT, platform data support isn't needed anymore. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
generated by cgit (git 2.34.1) at 2024-06-10 19:11:32 +0000