summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/tests
AgeCommit message (Collapse)Author
2023-01-04Merge tag 'drm-misc-next-2023-01-03' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v6.3: UAPI Changes: * connector: Support analog-TV mode property * media: Add MEDIA_BUS_FMT_RGB565_1X24_CPADHI, MEDIA_BUS_FMT_RGB666_1X18 and MEDIA_BUS_FMT_RGB666_1X24_CPADHI Cross-subsystem Changes: * dma-buf: Documentation fixes * i2c: Introduce i2c_client_get_device_id() helper Core Changes: * Improve support for analog TV output * bridge: Remove unused drm_bridge_chain functions * debugfs: Add per-device helpers and convert various DRM drivers * dp-mst: Various fixes * fbdev emulation: Always pick 32 bpp as default * KUnit: Add tests for managed helpers; Various cleanups * panel-orientation: Add quirks for Lenovo Yoga Tab 3 X90F and DynaBook K50 * TTM: Open-code ttm_bo_wait() and remove the helper Driver Changes: * Fix preferred depth and bpp values throughout DRM drivers * Remove #CONFIG_PM guards throughout DRM drivers * ast: Various fixes * bridge: Implement i2c's probe_new in various drivers; Fixes; ite-it6505: Locking fixes, Cache EDID data; ite-it66121: Support IT6610 chip, Cleanups; lontium-tl9611: Fix HDMI on DragonBoard 845c; parade-ps8640: Use atomic bridge functions * gud: Convert to DRM shadow-plane helpers; Perform flushing synchronously during atomic update * ili9486: Support 16-bit pixel data * imx: Split off IPUv3 driver; Various fixes * mipi-dbi: Convert to DRM shadow-plane helpers plus rsp driver changes;i Support separate I/O-voltage supply * mxsfb: Depend on ARCH_MXS or ARCH_MXC * omapdrm: Various fixes * panel: Use ktime_get_boottime() to measure power-down delay in various drivers; Fix auto-suspend delay in various drivers; orisetech-ota5601a: Add support * sprd: Cleanups * sun4i: Convert to new TV-mode property * tidss: Various fixes * v3d: Various fixes * vc4: Convert to new TV-mode property; Support Kunit tests; Cleanups; dpi: Support RGB565 and RGB666 formats; dsi: Convert DSI driver to bridge * virtio: Improve tracing * vkms: Support small cursors in IGT tests; Various fixes Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/Y7QIwlfElAYWxRcR@linux-uq9g
2023-01-03Merge tag 'drm-misc-next-fixes-2023-01-03' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Maxime writes: "The drm-misc-next-fixes leftovers. It addresses a bug in drm/scheduler ending up causing a lockup, and reduces the stack usage of some drm/mm kunit tests." Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20230103144926.bmjjni3xnuis2jmq@houat
2023-01-03drm/format-helper: Add conversion from XRGB8888 to 15-bit RGB555 formatsThomas Zimmermann
Add conversion from XRGB8888 to XRGB1555, ARGB1555 and RGBA5551, which are the formats currently supported by the simplefb infrastructure. The new helpers allow the output of XRGB8888 framebuffers to firmware scanout buffers in one of the 15-bit formats. v3: * use __le* for destination buffers (Jose, kernel test robot) v2: * test 15-bit results with local endianness (Jose) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: José Expósito <jose.exposito89@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230102112927.26565-10-tzimmermann@suse.de
2023-01-03drm/format-helper: Add conversion from XRGB8888 to ARGB2101010Thomas Zimmermann
Add dedicated helper to convert from XRGB8888 to ARGB2101010. Sets all alpha bits to make pixels fully opaque. v2: * set correct format in struct drm_framebuffer (Javier) * use cpubuf_to_le32() * type fixes Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: José Expósito <jose.exposito89@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230102112927.26565-9-tzimmermann@suse.de
2023-01-03drm/format-helper: Add conversion from XRGB8888 to ARGB8888Thomas Zimmermann
Add dedicated helper to convert from XRGB8888 to ARGB8888. Sets all alpha bits to make pixels fully opaque. v3: * use __le32 for destination buffer (Jose, kernel test robot) v2: * use cpubuf_to_le32() * type fixes Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: José Expósito <jose.exposito89@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230102112927.26565-8-tzimmermann@suse.de
2023-01-03drm/format-helper: Type fixes in format-helper testsThomas Zimmermann
Change the source-buffer type of le32buf_to_cpu() to __le32* to reflect endianness. Result buffers are converted to local endianness, so instantiate them from regular u8 or u32 types. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: José Expósito <jose.exposito89@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230102112927.26565-6-tzimmermann@suse.de
2023-01-03drm/format-helper: Store RGB565 in little-endian orderThomas Zimmermann
Fix to-RGB565 conversion helpers to store the result in little- endian byte order. Update test cases as well. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: José Expósito <jose.exposito89@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230102112927.26565-5-tzimmermann@suse.de
2023-01-03drm/format-helper: Fix test-input format conversionThomas Zimmermann
Convert test input for format helpers from host byte order to little-endian order. The current code does it the other way around, but there's no effective difference to the result. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: José Expósito <jose.exposito89@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230102112927.26565-4-tzimmermann@suse.de
2023-01-03drm/format-helper: Comment on RGB888 byte orderThomas Zimmermann
RGB888 is different than the other formats as most of its pixels are unaligned and therefore helper functions do not use endianness conversion helpers. Comment on this in the source code. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: José Expósito <jose.exposito89@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230102112927.26565-3-tzimmermann@suse.de
2022-12-23drm/tests: reduce drm_mm_test stack usageArnd Bergmann
The check_reserve_boundaries function uses a lot of kernel stack, and it gets inlined by clang, which makes __drm_test_mm_reserve use even more of it, to the point of hitting the warning limit: drivers/gpu/drm/tests/drm_mm_test.c:344:12: error: stack frame size (1048) exceeds limit (1024) in '__drm_test_mm_reserve' [-Werror,-Wframe-larger-than] When building with gcc, this does not happen, but the structleak plugin can similarly increase the stack usage and needs to be disabled, as we do for all other kunit users. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Maíra Canal <mairacanal@riseup.net> Link: https://patchwork.freedesktop.org/patch/msgid/20221215163511.266214-1-arnd@kernel.org
2022-12-13Merge tag 'drm-next-2022-12-13' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "The biggest highlight is that the accel subsystem framework is merged. Hopefully for 6.3 we will be able to line up a driver to use it. In drivers land, i915 enables DG2 support by default now, and nouveau has a big stability refactoring and initial ampere support, AMD includes new hw IP support and should build on ARM again. There is also an ofdrm driver to take over offb on platforms it's used. Stuff outside my tree, the dma-buf patches hit a few places, the vc4 firmware changes also do, and i915 has some interactions with MEI for discrete GPUs. I think all of those should have been acked/reviewed by relevant parties. New driver: - ofdrm - replacement for offb fbdev: - add support for nomodeset fourcc: - add Vivante tiled modifier core: - atomic-helpers: CRTC primary plane test fixes, fb access hooks - connector: TV API consistency, cmdline parser improvements - send connector hotplug on cleanup - sort makefile objects tests: - sort kunit tests - improve DP-MST tests - add kunit helpers to create a device sched: - module param for scheduling policy - refcounting fix buddy: - add back random seed log ttm: - convert ttm_resource to size_t - optimize pool allocations edid: - HFVSDB parsing support fixes - logging/debug improvements - DSC quirks dma-buf: - Add unlocked vmap and attachment mapping - move drivers to common locking convention - locking improvements firmware: - new API for rPI firmware and vc4 xilinx: - zynqmp: displayport bridge support - dpsub fix bridge: - adv7533: Remove dynamic lane switching - it6505: Runtime PM support, sync improvements - ps8640: Handle AUX defer messages - tc358775: Drop soft-reset over I2C panel: - panel-edp: Add INX N116BGE-EA2 C2 and C4 support. - Jadard JD9365DA-H3 - NewVision NV3051D amdgpu: - DCN support on ARM - DCN 2.1 secure display - Sienna Cichlid mode2 reset fixes - new GC 11.x firmware versions - drop AMD specific DSC workarounds in favour of drm code - clang warning fixes - scheduler rework - SR-IOV fixes - GPUVM locking fixes - fix memory leak in CS IOCTL error path - flexible array updates - enable new GC/PSP/SMU/NBIO IP - GFX preemption support for gfx9 amdkfd: - cache size fixes - userptr fixes - enable cooperative launch on gfx 10.3 - enable GC 11.0.4 KFD support radeon: - replace kmap with kmap_local_page - ACPI ref count fix - HDA audio notifier support i915: - DG2 enabled by default - MTL enablement work - hotplug refactoring - VBT improvements - Display and watermark refactoring - ADL-P workaround - temp disable runtime_pm for discrete- - fix for A380 as a secondary GPU - Wa_18017747507 for DG2 - CS timestamp support fixes for gen5 and earlier - never purge busy TTM objects - use i915_sg_dma_sizes for all backends - demote GuC kernel contexts to normal priority - gvt: refactor for new MDEV interface - enable DC power states on eDP ports - fix gen 2/3 workarounds nouveau: - fix page fault handling - Ampere acceleration support - driver stability improvements - nva3 backlight support msm: - MSM_INFO_GET_FLAGS support - DPU: XR30 and P010 image formats - Qualcomm SM6115 support - DSI PHY support for QCM2290 - HDMI: refactored dev init path - remove exclusive-fence hack - fix speed-bin detection - enable clamp to idle on 7c3 - improved hangcheck detection vmwgfx: - fb and cursor refactoring - convert to generic hashtable - cursor improvements etnaviv: - hw workarounds - softpin MMU fixes ast: - atomic gamma LUT support - convert to SHMEM lcdif: - support YUV planes - Increase DMA burst size - FIFO threshold tuning meson: - fix return type of cvbs mode_valid mgag200: - fix PLL setup on some revisions sun4i: - A100 and D1 support udl: - modesetting improvements - hot unplug support vc4: - support PAL-M - fix regression preventing 4K @ 60Hz - fix NULL ptr deref v3d: - switch to drm managed resources renesas: - RZ/G2L DSI support - DU Kconfig cleanup mediatek: - fixup dpi and hdmi - MT8188 dpi support - MT8195 AFBC support tegra: - NVDEC hardware on Tegra234 SoC hdlcd: - switch to drm managed resources ingenic: - fix registration error path hisilicon: - convert to drm_mode_init maildp: - use managed resources mtk: - use drm_mode_init rockchip: - use drm_mode_copy" * tag 'drm-next-2022-12-13' of git://anongit.freedesktop.org/drm/drm: (1397 commits) drm/amdgpu: fix mmhub register base coding error drm/amdgpu: add tmz support for GC IP v11.0.4 drm/amdgpu: enable GFX Clock Gating control for GC IP v11.0.4 drm/amdgpu: enable GFX Power Gating for GC IP v11.0.4 drm/amdgpu: enable GFX IP v11.0.4 CG support drm/amdgpu: Make amdgpu_ring_mux functions as static drm/amdgpu: generally allow over-commit during BO allocation drm/amd/display: fix array index out of bound error in DCN32 DML drm/amd/display: 3.2.215 drm/amd/display: set optimized required for comp buf changes drm/amd/display: Add debug option to skip PSR CRTC disable drm/amd/display: correct DML calc error of UrgentLatency drm/amd/display: correct static_screen_event_mask drm/amd/display: Ensure commit_streams returns the DC return code drm/amd/display: read invalid ddc pin status cause engine busy drm/amd/display: Bypass DET swath fill check for max clocks drm/amd/display: Disable uclk pstate for subvp pipes drm/amd/display: Fix DCN2.1 default DSC clocks drm/amd/display: Enable dp_hdmi21_pcon support drm/amd/display: prevent seamless boot on displays that don't have the preferred dig ...
2022-12-08drm/tests: Add a test for DRM managed actionsMaxime Ripard
DRM-managed actions are supposed to be ran whenever the device is released. Let's introduce a basic unit test to make sure it happens. Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Maíra Canal <mcanal@igalia.com> Link: https://lore.kernel.org/r/20221123-rpi-kunit-tests-v3-12-4615a663a84a@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-12-08drm/tests: helpers: Allow to pass a custom drm_driverMaxime Ripard
Some tests will need to provide their own drm_driver instead of relying on the dumb one in the helpers, so let's create a helper that allows to do so. Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/r/20221123-rpi-kunit-tests-v3-11-4615a663a84a@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-12-08drm/tests: helpers: Allow for a custom device struct to be allocatedMaxime Ripard
The current helper to allocate a DRM device doesn't allow for any subclassing by drivers, which is going to be troublesome as we work on getting some kunit testing on atomic modesetting code. Let's use a similar pattern to the other allocation helpers by providing the structure size and offset as arguments. Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/r/20221123-rpi-kunit-tests-v3-10-4615a663a84a@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-12-08drm/tests: helpers: Make sure the device is boundMaxime Ripard
The device managed resources are freed when the device is detached, so it has to be bound in the first place. Let's create a fake driver that we will bind to our fake device to benefit from the device managed cleanups in our tests. Reviewed-by: Maíra Canal <mcanal@igalia.com> Link: https://lore.kernel.org/r/20221123-rpi-kunit-tests-v3-9-4615a663a84a@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-12-08drm/tests: helpers: Switch to a platform_deviceMaxime Ripard
The device managed resources are ran if the device has bus, which is not the case of a root_device. Let's use a platform_device instead. Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Maíra Canal <mcanal@igalia.com> Link: https://lore.kernel.org/r/20221123-rpi-kunit-tests-v3-8-4615a663a84a@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-12-08drm/tests: helpers: Create the device in another functionMaxime Ripard
We'll need in some tests to control when the device needs to be added and removed, so let's split the device creation from the DRM device creation function. Reviewed-by: Maíra Canal <mcanal@igalia.com> Link: https://lore.kernel.org/r/20221123-rpi-kunit-tests-v3-7-4615a663a84a@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-12-08drm/tests: helpers: Remove the name parameterMaxime Ripard
The device name isn't really useful, we can just define it instead of exposing it in the API. Reviewed-by: Maíra Canal <mcanal@igalia.com> Link: https://lore.kernel.org/r/20221123-rpi-kunit-tests-v3-6-4615a663a84a@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-12-08drm/tests: helpers: Rename the device init helperMaxime Ripard
The name doesn't really fit the conventions for the other helpers in DRM/KMS, so let's rename it to make it obvious that we allocate a new DRM device. Reviewed-by: Maíra Canal <mcanal@igalia.com> Link: https://lore.kernel.org/r/20221123-rpi-kunit-tests-v3-5-4615a663a84a@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-12-08drm/tests: helpers: Switch to EXPORT_SYMBOL_GPLMaxime Ripard
drm_kunit_device_init() among other things will allocate a device and wrap around root_device_register. This function is exported with EXPORT_SYMBOL_GPL, so we can't really change the license. Fixes: a77a3ffa151b ("drm/tests: helpers: Add missing export") Suggested-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Maíra Canal <mcanal@igalia.com> Link: https://lore.kernel.org/r/20221123-rpi-kunit-tests-v3-4-4615a663a84a@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-12-08drm/tests: helpers: Document drm_kunit_device_init()Maxime Ripard
Commit 44a3928324e9 ("drm/tests: Add Kunit Helpers") introduced the drm_kunit_device_init() function but didn't document it properly. Add that documentation. Reviewed-by: Maíra Canal <mcanal@igalia.com> Link: https://lore.kernel.org/r/20221123-rpi-kunit-tests-v3-3-4615a663a84a@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-12-08drm/tests: Introduce a config option for the KUnit helpersMaxime Ripard
Driver-specific tests will need access to the helpers without pulling every DRM framework test. Let's create an intermediate Kconfig options for the helpers. Suggested-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: Maíra Canal <mcanal@igalia.com> Link: https://lore.kernel.org/r/20221123-rpi-kunit-tests-v3-2-4615a663a84a@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-12-08drm/tests: helpers: Move the helper header to include/drmMaxime Ripard
We'll need to use those helpers from drivers too, so let's move it to a more visible location. Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/r/20221123-rpi-kunit-tests-v3-1-4615a663a84a@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-12-01drm/tests: probe_helper: Fix uninitialized variableMaxime Ripard
The len variable is used while uninitialized. Initialize it. Fixes: 1e4a91db109f ("drm/probe-helper: Provide a TV get_modes helper") Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/r/20221201090736.290935-1-maxime@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-11-28drm/tests: helpers: Add missing exportMaxime Ripard
drm_kunit_device_init() is a public function meant to be used by other tests, but isn't exported. This leads to modpost errors when the other tests are compiled as module. Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Maíra Canal <mairacanal@riseup.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20221128081938.742410-3-maxime@cerno.tech
2022-11-24drm/probe-helper: Provide a TV get_modes helperNoralf Trønnes
Most of the TV connectors will need a similar get_modes implementation that will, depending on the drivers' capabilities, register the 480i and 576i modes. That implementation will also need to set the preferred flag and order the modes based on the driver and users preferrence. This is especially important to guarantee that a userspace stack such as Xorg can start and pick up the preferred mode while maintaining a working output. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-12-256dad125326@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-11-24drm/modes: Introduce more named modesMaxime Ripard
Now that we can easily extend the named modes list, let's add a few more analog TV modes that were used in the wild, and some unit tests to make sure it works as intended. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-11-256dad125326@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-11-24drm/modes: Properly generate a drm_display_mode from a named modeMaxime Ripard
The framework will get the drm_display_mode from the drm_cmdline_mode it got by parsing the video command line argument by calling drm_connector_pick_cmdline_mode(). The heavy lifting will then be done by the drm_mode_create_from_cmdline_mode() function. In the case of the named modes though, there's no real code to make that translation and we rely on the drivers to guess which actual display mode we meant. Let's modify drm_mode_create_from_cmdline_mode() to properly generate the drm_display_mode we mean when passing a named mode. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-9-256dad125326@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-11-24drm/modes: Introduce the tv_mode property as a command-line optionMaxime Ripard
Our new tv mode option allows to specify the TV mode from a property. However, it can still be useful, for example to avoid any boot time artifact, to set that property directly from the kernel command line. Let's add some code to allow it, and some unit tests to exercise that code. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-8-256dad125326@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-11-24drm/connector: Add a function to lookup a TV mode by its nameMaxime Ripard
As part of the command line parsing rework coming in the next patches, we'll need to lookup drm_connector_tv_mode values by their name, already defined in drm_tv_mode_enum_list. In order to avoid any code duplication, let's do a function that will perform a lookup of a TV mode name and return its value. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-7-256dad125326@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-11-24drm/modes: Add a function to generate analog display modesMaxime Ripard
Multiple drivers (meson, vc4, sun4i) define analog TV 525-lines and 625-lines modes in their drivers. Since those modes are fairly standard, and that we'll need to use them in more places in the future, it makes sense to move their definition into the core framework. However, analog display usually have fairly loose timings requirements, the only discrete parameters being the total number of lines and pixel clock frequency. Thus, we created a function that will create a display mode from the standard, the pixel frequency and the active area. Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-6-256dad125326@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-11-24drm/tests: client: Mention that we can't use MODULE_ macrosMaxime Ripard
That file is included directly, so we can't use any MODULE macro. Let's leave a comment to avoid any future mistake. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-1-256dad125326@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-11-17drm/tests: helpers: Add SPDX headerMaxime Ripard
The SPDX header is missing, let's add it and fix the corresponding checkpatch warning. Suggested-by: Maíra Canal <mairacanal@riseup.net> Fixes: 44a3928324e9 ("drm/tests: Add Kunit Helpers") Reviewed-by: Maíra Canal <mairacanal@riseup.net> Link: https://lore.kernel.org/r/20221116151833.1679379-2-maxime@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-11-17drm/tests: client: Remove extra blank linesMaxime Ripard
Some extra blank lines slipped through, remove them. Fixes: 8fc0380f6ba7 ("drm/client: Add some tests for drm_connector_pick_cmdline_mode()") Reviewed-by: Maíra Canal <mairacanal@riseup.net> Link: https://lore.kernel.org/r/20221116151833.1679379-1-maxime@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-11-16drm/tests: helpers: Add module infosMaxime Ripard
The MODULE_LICENSE macro is missing from the kunit helpers file, thus leading to a build error. Let's introduce it along with MODULE_AUTHOR. Fixes: 44a3928324e9 ("drm/tests: Add Kunit Helpers") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Maíra Canal <mairacanal@riseup.net> Link: https://lore.kernel.org/r/20221116091712.1309651-2-maxime@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-11-16drm/tests: Include helpers headerMaxime Ripard
The kunit helpers code weren't including its header, leading to a warning that no previous prototype had been defined for public functions. Include the matching header to fix the warning. Fixes: 44a3928324e9 ("drm/tests: Add Kunit Helpers") Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Maíra Canal <mairacanal@riseup.net> Link: https://lore.kernel.org/r/20221116091712.1309651-1-maxime@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-11-15drm/client: Add some tests for drm_connector_pick_cmdline_mode()Maxime Ripard
drm_connector_pick_cmdline_mode() is in charge of finding a proper drm_display_mode from the definition we got in the video= command line argument. Let's add some unit tests to make sure we're not getting any regressions there. Acked-by: Noralf Trønnes <noralf@tronnes.org> Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v9-8-24b168e5bcd5@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-11-15drm/tests: Add Kunit HelpersMaxime Ripard
As the number of kunit tests in KMS grows further, we start to have multiple test suites that, for example, need to register a mock DRM driver to interact with the KMS function they are supposed to test. Let's add a file meant to provide those kind of helpers to avoid duplication. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v9-2-24b168e5bcd5@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-11-04Merge tag 'drm-misc-next-2022-11-03' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 6.2: UAPI Changes: Cross-subsystem Changes: - dma-buf: locking improvements - firmware: New API in the RaspberryPi firmware driver used by vc4 Core Changes: - client: Null pointer dereference fix in drm_client_buffer_delete() - mm/buddy: Add back random seed log - ttm: Convert ttm_resource to use size_t for its size, fix for an undefined behaviour Driver Changes: - bridge: - adv7511: use dev_err_probe - it6505: Fix return value check of pm_runtime_get_sync - panel: - sitronix: Fixes and clean-ups - lcdif: Increase DMA burst size - rockchip: runtime_pm improvements - vc4: Fix for a regression preventing the use of 4k @ 60Hz, and further HDMI rate constraints check. - vmwgfx: Cursor improvements Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20221103083437.ksrh3hcdvxaof62l@houat
2022-11-02drm/tests: Add back seed value informationArthur Grillo
As reported by Michał, the drm_mm and drm_buddy unit tests lost the printk with seed value after they were refactored into KUnit. Add kunit_info with seed value information to assure reproducibility. Reported-by: Michał Winiarski <michal.winiarski@intel.com> Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net> Signed-off-by: Maíra Canal <mairacanal@riseup.net> Link: https://patchwork.freedesktop.org/patch/msgid/20221028221755.340487-1-arthurgrillo@riseup.net
2022-10-28Merge tag 'drm-misc-next-2022-10-27' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 6.2: UAPI Changes: Cross-subsystem Changes: Core Changes: - connector: Send hotplug event on cleanup - edid: logging/debug improvements - plane_helper: Improve tests Driver Changes: - bridge: - it6505: Synchronization improvements - panel: - panel-edp: Add INX N116BGE-EA2 C2 and C4 support. - nouveau: Fix page-fault handling - vmwgfx: fb and cursor refactoring, convert to generic hashtable Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20221027073407.c2tlaczvzjrnzazi@houat
2022-10-27kunit: Use KUNIT_EXPECT_MEMEQ macroMaíra Canal
Use KUNIT_EXPECT_MEMEQ to compare memory blocks in replacement of the KUNIT_EXPECT_EQ macro. Therefor, the statement KUNIT_EXPECT_EQ(test, memcmp(foo, bar, size), 0); is replaced by: KUNIT_EXPECT_MEMEQ(test, foo, bar, size); Signed-off-by: Maíra Canal <mairacanal@riseup.net> Acked-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-10-25Merge tag 'drm-misc-next-2022-10-20' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 6.2: UAPI Changes: - Documentation for page-flip flags Cross-subsystem Changes: - dma-buf: Add unlocked variant of vmapping and attachment-mapping functions Core Changes: - atomic-helpers: CRTC primary plane test fixes - connector: TV API consistency improvements, cmdline parsing improvements - crtc-helpers: Introduce drm_crtc_helper_atomic_check() helper - edid: Fixes for HFVSDB parsing, - fourcc: Addition of the Vivante tiled modifier - makefile: Sort and reorganize the objects files - mode_config: Remove fb_base from drm_mode_config_funcs - sched: Add a module parameter to change the scheduling policy, refcounting fix for fences - tests: Sort the Kunit tests in the Makefile, improvements to the DP-MST tests - ttm: Remove unnecessary drm_mm_clean() call Driver Changes: - New driver: ofdrm - Move all drivers to a common dma-buf locking convention - bridge: - adv7533: Remove dynamic lane switching - it6505: Runtime PM support - ps8640: Handle AUX defer messages - tc358775: Drop soft-reset over I2C - ast: Atomic Gamma LUT Support, Convert to SHMEM, various improvements - lcdif: Support for YUV planes - mgag200: Fix PLL Setup on some revisions - udl: Modesetting improvements, hot-unplug support - vc4: Fix support for PAL-M Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20221020072405.g3o4hxuk75gmeumw@houat
2022-10-20drm/plane_helper: Split into parameterized test casesMichał Winiarski
The test was constructed as a single function (test case) which checks multiple conditions, calling the function that is tested multiple times with different arguments. This usually means that it can be easily converted into multiple test cases. Split igt_check_plane_state into two parameterized test cases, drm_check_plane_state and drm_check_invalid_plane_state. Passing output: ============================================================ ============== drm_plane_helper (2 subtests) =============== ================== drm_check_plane_state =================== [PASSED] clipping_simple [PASSED] clipping_rotate_reflect [PASSED] positioning_simple [PASSED] upscaling [PASSED] downscaling [PASSED] rounding1 [PASSED] rounding2 [PASSED] rounding3 [PASSED] rounding4 ============== [PASSED] drm_check_plane_state ============== ============== drm_check_invalid_plane_state =============== [PASSED] positioning_invalid [PASSED] upscaling_invalid [PASSED] downscaling_invalid ========== [PASSED] drm_check_invalid_plane_state ========== ================ [PASSED] drm_plane_helper ================= ============================================================ Testing complete. Ran 12 tests: passed: 12 v2: Add missing EXPECT/ASSERT (Maíra) v3: Use single EXPECT insted of condition + KUNIT_FAILURE (Maíra) v4: Rebase after "drm_test" rename Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by: Maíra Canal <mairacanal@riseup.net> Signed-off-by: Maíra Canal <mairacanal@riseup.net> Link: https://patchwork.freedesktop.org/patch/msgid/20221020082135.779872-2-michal.winiarski@intel.com
2022-10-20drm/plane_helper: Print actual/expected values on failureMichał Winiarski
Currently the values are printed with debug log level. Adjust the log level and link the output with the test by using kunit_err. Example output: foo: dst: 20x20+10+10, expected: 10x10+0+0 foo: EXPECTATION FAILED at drivers/gpu/drm/tests/drm_plane_helper_test.c:85 Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by: Maíra Canal <mairacanal@riseup.net> Signed-off-by: Maíra Canal <mairacanal@riseup.net> Link: https://patchwork.freedesktop.org/patch/msgid/20221020082135.779872-1-michal.winiarski@intel.com
2022-10-20drm: tests: Fix a buffer overflow in format_helper_testDavid Gow
The xrgb2101010 format conversion test (unlike for other formats) does an endianness conversion on the results. However, it always converts TEST_BUF_SIZE 32-bit integers, which results in reading from (and writing to) more memory than in present in the result buffer. Instead, use the buffer size, divided by sizeof(u32). The issue could be reproduced with KASAN: ./tools/testing/kunit/kunit.py run --kunitconfig drivers/gpu/drm/tests \ --kconfig_add CONFIG_KASAN=y --kconfig_add CONFIG_KASAN_VMALLOC=y \ --kconfig_add CONFIG_KASAN_KUNIT_TEST=y \ drm_format_helper_test.*xrgb2101010 Reported-by: Linux Kernel Functional Testing <lkft@linaro.org> Fixes: 453114319699 ("drm/format-helper: Add KUnit tests for drm_fb_xrgb8888_to_xrgb2101010()") Signed-off-by: David Gow <davidgow@google.com> Reviewed-by: Maíra Canal <mairacanal@riseup.net> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221019073239.3779180-1-davidgow@google.com
2022-10-18Merge drm/drm-next into drm-misc-nextMaxime Ripard
Let's kick-off this release cycle. Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-10-16drm/tests: Split drm_test_dp_mst_sideband_msg_req_decode into parameterized ↵Maíra Canal
tests The drm_test_dp_mst_sideband_msg_req_decode repeats the same test structure with different parameters. This could be better represented by parameterized tests, provided by KUnit. In addition to the parameterization of the tests, the test case for the client ID was changed: instead of using get_random_bytes to generate the client ID, the client ID is now hardcoded in the test case. This doesn't affect the assertively of the tests, as this test case only compare the data going in with the data going out and it doesn't transform the data itself in any way. So, convert drm_test_dp_mst_sideband_msg_req_decode into parameterized tests and make the tests' allocations and prints completely managed by KUnit. Signed-off-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Signed-off-by: Maíra Canal <mairacanal@riseup.net> Link: https://patchwork.freedesktop.org/patch/msgid/20221001223422.857505-2-mcanal@igalia.com
2022-10-16drm/tests: Split drm_test_dp_mst_calc_pbn_mode into parameterized testsMaíra Canal
The drm_test_dp_mst_calc_pbn_mode is based on a loop that executes tests for a couple of test cases. This could be better represented by parameterized tests, provided by KUnit. So, convert the drm_test_dp_mst_calc_pbn_mode into parameterized tests. Signed-off-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Signed-off-by: Maíra Canal <mairacanal@riseup.net> Link: https://patchwork.freedesktop.org/patch/msgid/20221001223422.857505-1-mcanal@igalia.com
2022-10-11treewide: use get_random_u32() when possibleJason A. Donenfeld
The prandom_u32() function has been a deprecated inline wrapper around get_random_u32() for several releases now, and compiles down to the exact same code. Replace the deprecated wrapper with a direct call to the real function. The same also applies to get_random_int(), which is just a wrapper around get_random_u32(). This was done as a basic find and replace. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake Acked-by: Chuck Lever <chuck.lever@oracle.com> # for nfsd Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> # for thunderbolt Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Acked-by: Helge Deller <deller@gmx.de> # for parisc Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
generated by cgit (git 2.34.1) at 2025-05-29 23:30:06 +0000