summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/v3d
AgeCommit message (Collapse)Author
2019-03-14drm/v3d: Remove some dead members of struct v3d_bo.Eric Anholt
vmas was from the previous model of page table management (one per fd), and vaddr was left over from vc4. Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190308161716.2466-4-eric@anholt.net Acked-by: Rob Herring <robh@kernel.org>
2019-03-14drm/v3d: Use drm_gem_lock_reservations()/drm_gem_unlock_reservations()Eric Anholt
Now that we have core helpers, this gets rid of a lot of boilerplate. Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190308161716.2466-3-eric@anholt.net Acked-by: Rob Herring <robh@kernel.org>
2019-03-08drm/v3d: Add support for V3D v4.2.Eric Anholt
No compatible string for it yet, just the version-dependent changes. They've now tied the hub and the core interrupt lines into a single interrupt line coming out of the block. It also turns out I made a mistake in modeling the V3D v3.3 and v4.1 bridge as a part of V3D itself -- the bridge is going away in favor of an external reset controller in a larger HW module. v2: Use consistent checks for whether we're on 4.2, and fix a leak in an error path. v3: Use more general means of determining if the current 4.2 changes are in place, as apparently other platforms may switch back (noted by Dave). Update the binding doc. v4: Improve error handling for IRQ init. Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190308174336.7866-2-eric@anholt.net Reviewed-by: Dave Emett <david.emett@broadcom.com>
2019-03-08drm/v3d: Handle errors from IRQ setup.Eric Anholt
Noted in review by Dave Emett for V3D 4.2 support. Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190308174336.7866-1-eric@anholt.net Reviewed-by: Dave Emett <david.emett@broadcom.com>
2019-03-08drm/v3d: Make sure the GPU is on when measuring clocks.Eric Anholt
You'll get garbage measurements if the registers always read back 0xdeadbeef Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190220233658.986-3-eric@anholt.net Reviewed-by: Dave Emett <david.emett@broadcom.com>
2019-03-08drm/v3d: Don't try to set OVRTMUOUT on V3D 4.x.Eric Anholt
The old field is gone and the register now has a different field, QRMAXCNT for how many TMU requests get serviced before thread switch. We were accidentally reducing it from its default of 0x3 (4 requests) to 0x0 (1). v2: Skip setting the reg at all on 4.x, instead of trying to update only the old field. Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190220233658.986-2-eric@anholt.net Reviewed-by: Dave Emett <david.emett@broadcom.com>
2019-02-19drm: v3d: Switch to use drm_gem_object reservation_objectRob Herring
Now that the base struct drm_gem_object has a reservation_object, use it and remove the private BO one. Cc: Eric Anholt <eric@anholt.net> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190202154158.10443-5-robh@kernel.org Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-02-19drm/v3d: Update top-level kerneldoc for the addition of TFU.Eric Anholt
Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190207201001.5730-1-eric@anholt.net Reviewed-by: Thomas Spurden <thomas.spurden@broadcom.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-02-19drm/v3d: Fix BO stats accounting for dma-buf-imported buffers.Eric Anholt
We always decrement at GEM free, so make sure we increment at GEM creation for dma-bufs. Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190207232613.24981-1-eric@anholt.net Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-25drm/sched: Refactor ring mirror list handling.Andrey Grodzovsky
Decauple sched threads stop and start and ring mirror list handling from the policy of what to do about the guilty jobs. When stoppping the sched thread and detaching sched fences from non signaled HW fenes wait for all signaled HW fences to complete before rerunning the jobs. v2: Fix resubmission of guilty job into HW after refactoring. v4: Full restart for all the jobs, not only from guilty ring. Extract karma increase into standalone function. v5: Rework waiting for signaled jobs without relying on the job struct itself as those might already be freed for non 'guilty' job's schedulers. Expose karma increase to drivers. v6: Use list_for_each_entry_safe_continue and drm_sched_process_job in case fence already signaled. Call drm_sched_increase_karma only once for amdgpu and add documentation. v7: Wait only for the latest job's fence. Suggested-by: Christian Koenig <Christian.Koenig@amd.com> Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-07drm/v3d: Invalidate the caches from the outside in.Eric Anholt
This would be a fairly obscure race, but let's make sure we don't ever lose it. Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20181203222438.25417-6-eric@anholt.net Reviewed-by: Dave Emett <david.emett@broadcom.com>
2018-12-07drm/v3d: Stop trying to flush L2C on V3D 3.3+Eric Anholt
This cache was replaced with the slice accessing the L2T in the newer generations. Noted by Dave during review. Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20181203222438.25417-5-eric@anholt.net Reviewed-by: Dave Emett <david.emett@broadcom.com>
2018-12-07drm/v3d: Drop the wait for L2T flush to complete.Eric Anholt
According to Dave, once you've started an L2T flush, all L2T accesses will be blocked until the flush completes. This fixes a consistent 3-4ms stall between the ioctl and running the job, and 3DMMES Taiji goes from 27fps to 110fps. v2: Leave a note about why we don't need to wait for completion. Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: 57692c94dcbe ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+") Reviewed-by: Dave Emett <david.emett@broadcom.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181203222438.25417-4-eric@anholt.net
2018-12-07drm/v3d: Don't bother flushing L1TD at job start.Eric Anholt
This is the write combiner for TMU writes. You're supposed to flush that at job end if you had dirtied any cachelines. Flushing it at job start then doesn't make any sense. Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: 57692c94dcbe ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+") Reviewed-by: Dave Emett <david.emett@broadcom.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181203222438.25417-3-eric@anholt.net
2018-12-07drm/v3d: Drop unused v3d_flush_caches().Eric Anholt
Now that I've specified how the end-of-pipeline flushing should work, we're never going to use this function. Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Dave Emett <david.emett@broadcom.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181203222438.25417-2-eric@anholt.net
2018-12-06drm/v3d: fix broken buildChristian König
I missed one case during the recent revert of the replace_fence interface change. Fixes: 0b258ed1a219 drm: revert "expand replace_fence to support timeline point v2" Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/266134/
2018-12-05drm: revert "expand replace_fence to support timeline point v2"Christian König
This reverts commit 9a09a42369a4a37a959c051d8e1a1f948c1529a4. The whole interface isn't thought through. Since this function can't fail we actually can't allocate an object to store the sync point. Sorry, I should have taken the lead on this from the very beginning and reviewed it more thoughtfully. Going to propose a new interface as a follow up change. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Link: https://patchwork.freedesktop.org/patch/265580/
2018-12-03drm/v3d: Add more tracepoints for V3D GPU rendering.Eric Anholt
The core scheduler tells us when the job is pushed to the scheduler's queue, and I had the job_run functions saying when they actually queue the job to the hardware. By adding tracepoints for the very top of the ioctls and the IRQs signaling job completion, "perf record -a -e v3d:.\* -e gpu_scheduler:.\* <job>; perf script" gets you a pretty decent timeline. Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20181201005759.28093-5-eric@anholt.net Reviewed-by: Dave Emett <david.emett@broadcom.com>
2018-12-03drm/v3d: Add missing fence timeline name for TFU.Eric Anholt
We shouldn't be returning v3d-render for our new queue. Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: 83d5139982db ("drm/v3d: Add support for submitting jobs to the TFU.") Link: https://patchwork.freedesktop.org/patch/msgid/20181201005759.28093-6-eric@anholt.net Reviewed-by: Dave Emett <david.emett@broadcom.com>
2018-11-30drm/v3d: Fix prime imports of buffers from other drivers.Eric Anholt
v3d_bo_get_pages() checks this to decide to map the imported buffer instead of the backing shmem file. The caller was about to set this value anyway, and there's no error path in between. Ideally we wouldn't even allocate the shmem file for our imports, but that's a more invasive fix. Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: 57692c94dcbe ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+") Link: https://patchwork.freedesktop.org/patch/msgid/20181128230927.10951-3-eric@anholt.net Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Dave Emett <david.emett@broadcom.com>
2018-11-30drm/v3d: Drop the "dev" argument to lock/unlock of BO reservations.Eric Anholt
They were unused, as Dave Emett noticed in TFU review. Signed-off-by: Eric Anholt <eric@anholt.net> Cc: Dave Emett <david.emett@broadcom.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181128230927.10951-2-eric@anholt.net Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-11-30drm/v3d: Add support for submitting jobs to the TFU.Eric Anholt
The TFU can copy from raster, UIF, and SAND input images to UIF output images, with optional mipmap generation. This will certainly be useful for media EGL image input, but is also useful immediately for mipmap generation without bogging the V3D core down. For now we only run the queue 1 job deep, and don't have any hang recovery (though I don't think we should need it, with TFU). Queuing multiple jobs in the HW will require synchronizing the YUV coefficient regs updates since they don't get FIFOed with the job. v2: Change the ioctl to IOW instead of IOWR, always set COEF0, explain why TFU is AUTH, clarify the syncing docs, drop the unused TFU interrupt regs (you're expected to use the hub's), don't take &bo->base for NULL bos. v3: Fix a little whitespace alignment (noticed by checkpatch), rebase on drm_sched_job_cleanup() changes. Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Dave Emett <david.emett@broadcom.com> (v2) Link: https://patchwork.freedesktop.org/patch/264607/
2018-11-29Merge tag 'drm-misc-next-2018-11-28' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v4.21: Core Changes: - Merge drm_info.c into drm_debugfs.c - Complete the fake drm_crtc_commit's hw_done/flip_done sooner. - Remove deprecated drm_obj_ref/unref functions. All drivers use get/put now. - Decrease stack use of drm_gem_prime_mmap. - Improve documentation for dumb callbacks. Driver Changes: - Add edid support to virtio. - Wait on implicit fence in meson and sun4i. - Add support for BGRX8888 to sun4i. - Preparation patches for sun4i driver to start supporting linear and tiled YUV formats. - Add support for HDMI 1.4 4k modes to meson, and support for VIC alternate timings. - Drop custom dumb_map in vkms. - Small fixes and cleanups to v3d. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/151a3270-b1be-ed75-bd58-6b29d741f592@linux.intel.com
2018-11-27drm/v3d: Clean up the reservation object setup.Eric Anholt
The extra to_v3d_bo() calls came from copying this from the vc4 driver, which stored the cma gem object in the structs. v2: Fix an unused var warning Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20181108161654.19888-4-eric@anholt.net Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> (v1)
2018-11-27drm/v3d: Update a comment about what uses v3d_job_dependency().Eric Anholt
I merged bin and render's paths in a late refactoring. Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20181108161654.19888-3-eric@anholt.net Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-11-19Merge branch 'drm-next-4.21' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next New features for 4.21: amdgpu: - Support for SDMA paging queue on vega - Put compute EOP buffers into vram for better performance - Share more code with amdkfd - Support for scanout with DCC on gfx9 - Initial kerneldoc for DC - Updated SMU firmware support for gfx8 chips - Rework CSA handling for eventual support for preemption - XGMI PSP support - Clean up RLC handling - Enable GPU reset by default on VI, SOC15 dGPUs - Ring and IB test cleanups amdkfd: - Share more code with amdgpu ttm: - Move global init out of the drivers scheduler: - Track if schedulers are ready for work - Timeout/fault handling changes to facilitate GPU recovery Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181114165113.3751-1-alexander.deucher@amd.com
2018-11-05drm/scheduler: Add drm_sched_job_cleanupSharat Masetty
This patch adds a new API to clean up the scheduler job resources. This is primarliy needed in cases the job was created but was not queued to the scheduler queue. Additionally with this change, the layer which creates the scheduler job also gets to free up the job's resources and this entails moving the dma_fence_put(finished_fence) to the drivers ops free handler routines. Signed-off-by: Sharat Masetty <smasetty@codeaurora.org> Reviewed-by: Christian König <christian.koenig@amd.com> Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/sched: make sure timer is restartedChristian König
Make sure we always restart the timer after a timeout and remove the device specific workarounds. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-25dma-buf: allow reserving more than one shared fence slotChristian König
Let's support simultaneous submissions to multiple engines. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Link: https://patchwork.kernel.org/patch/10626149/
2018-10-24Merge drm/drm-next into drm-misc-nextSean Paul
4.19 is out, Lyude asked for a backmerge, and it's been a while. All very good reasons on their own :-) Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-10-16drm: add flags to drm_syncobj_find_fenceChunming Zhou
flags can be used by driver to decide whether need to block wait submission. Signed-off-by: Chunming Zhou <david1.zhou@amd.com> SIgned-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.kernel.org/patch/10641339/
2018-10-15drm/v3d: Skip debugfs dumping GCA on platforms without GCA.Eric Anholt
Fixes an oops reading this debugfs entry on BCM7278. Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180928232126.4332-4-eric@anholt.net Fixes: 57692c94dcbe ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+") Cc: <stable@vger.kernel.org> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-10-15drm/v3d: Add a little debugfs entry for measuring the core clock.Eric Anholt
This adds just enough performance counter support to measure the clock. We don't have linux kernel drivers for the clock driving the HW, and this was useful for determining that the V3D HW is running on a slow clock, not that the driver was slow. Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180928232126.4332-2-eric@anholt.net Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-10-15drm/v3d: Fix a use-after-free race accessing the scheduler's fences.Eric Anholt
Once we push the job, the scheduler could run it and free it. So, if we want to reference their fences, we need to grab them before then. I haven't seen this happen in many days of conformance test runtime, but let's still close the race. Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: 57692c94dcbe ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+") Link: https://patchwork.freedesktop.org/patch/254119/ Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-09-27drm/scheduler: remove timeout work_struct from drm_sched_job (v3)Nayan Deshmukh
having a delayed work item per job is redundant as we only need one per scheduler to track the time out the currently executing job. v2: the first element of the ring mirror list is the currently executing job so we don't need a additional variable for it v3: squash in fixes for v3d and etnaviv Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com> Suggested-by: Christian König <christian.koenig@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-06drm: expand replace_fence to support timeline point v2Chunming Zhou
we can place a fence to a timeline point after expanded. v2: change func parameter order Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/246543/
2018-09-06drm: expand drm_syncobj_find_fence to support timeline point v2Chunming Zhou
we can fetch timeline point fence after expanded. v2: The parameter fence is the result of the function and should come last. Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/246541/
2018-07-25drm/scheduler: modify API to avoid redundancyNayan Deshmukh
entity has a scheduler field and we don't need the sched argument in any of the functions where entity is provided. Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-20Merge branch 'drm-next-4.19' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next More features for 4.19: - Map processes to vmids for debugging GPUVM faults - Raven gfxoff fixes - Initial gfxoff support for vega12 - Use defines for interrupt sources rather than magic numbers - DC aux fixes - Finish DC logging TODO - Add more DC debugfs interfaces for conformance testing - Add CRC support for DCN - Scheduler rework in preparation for load balancing - Unify common smu9 code - Clean up UVD instancing support - ttm cleanups - Misc fixes and cleanups Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180719194001.3488-1-alexander.deucher@amd.com
2018-07-19Merge tag 'drm-misc-next-2018-07-11' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 4.19: Cross-subsystem Changes: - many dt-bindings Doc changes Core Changes: - Encoder clean ups (Ville Syrjälä) - Connector Writeback improvements(Boris Brezillon) - Fake vblank support (Boris Brezillon) - API for in-kernel clients (Noralf Trønnes) - improvements to the path of finding panels(Boris Brezillon) Driver Changes: - initial support for the virtual display driver - vkms(Haneen Mohammed and Rodrigo Siqueira) - panel: add Rocktech RK070ER9427 LCD support (Jagan Teki) - panel: add support for the EDT ETM0700G0EDH6 and EDT ETM0700G0BDH6(Jan Tuerk) - panel: add DLC DLC0700YZG-1 (Philipp Zabel) - panel: add support for BOE HV070WSA-100 (Andrzej Hajda) - panel: add newhaven, nhd-4.3-480272ef-atxl LCD (Tomi Valkeinen) - panel: add support for Innolux G070Y2-L01 (Christoph Fritz) - panel: add support for DataImage SCF0700C48GGU18 (Michal Vokáč) - panel: add support for Sharp LQ035Q7DB03 (Vladimir Zapolskiy) - panel: p079zca: Refactor panel driver to support multiple panels (Lin Huang) - sun4i: Add R40 display engine compatible(Jernej Skrabec) Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180712011137.GA26620@juma
2018-07-13drm/scheduler: modify args of drm_sched_entity_initNayan Deshmukh
replace run queue by a list of run queues and remove the sched arg as that is part of run queue itself Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> Acked-by: Eric Anholt <eric@anholt.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/scheduler: Rename cleanup functions v2.Andrey Grodzovsky
Everything in the flush code path (i.e. waiting for SW queue to become empty) names with *_flush() and everything in the release code path names *_fini() This patch also effect the amdgpu and etnaviv drivers which use those functions. v2: Also pplay the change to vd3. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Suggested-by: Christian König <christian.koenig@amd.com> Acked-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/v3d: Fix a grammar nit in the scheduler docs.Eric Anholt
Signed-off-by: Eric Anholt <eric@anholt.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180703170515.6298-4-eric@anholt.net Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Daniel Vetter <daniel@ffwll.ch>
2018-07-05drm/v3d: Remove unnecessary dma_fence_ops.Eric Anholt
The dma-fence core as of commit 418cc6ca0607 ("dma-fence: Make ->wait callback optional") provides appropriate defaults for these methods. Signed-off-by: Eric Anholt <eric@anholt.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180703170515.6298-2-eric@anholt.net Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Daniel Vetter <daniel@ffwll.ch>
2018-07-05drm/v3d: Delay the scheduler timeout if we're still making progress.Eric Anholt
GTF-GLES2.gtf.GL.acos.acos_float_vert_xvary submits jobs that take 4 seconds at maximum resolution, but we still want to reset quickly if a job is really hung. Sample the CL's current address and the return address (since we call into tile lists repeatedly) and if either has changed then assume we've made progress. Signed-off-by: Eric Anholt <eric@anholt.net> Cc: Lucas Stach <l.stach@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180703170515.6298-1-eric@anholt.net Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Daniel Vetter <daniel@ffwll.ch>
2018-07-05drm/v3d: use new return type vm_fault_t in v3d_gem_faultSouptick Joarder
Instead of converting an errno into a vm_fault_t ourselves, use vmf_insert_mixed() which returns a vm_fault_t directly. Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180704145556.GA11036@jordon-HP-15-Notebook-PC Reviewed-by: Matthew Wilcox <willy@infradead.org>
2018-06-21drm/v3d: Remove the bad signaled() implementation.Eric Anholt
Since our seqno value comes from a counter associated with the GPU ring, not the entity (aka client), they'll be completed out of order. There's actually no need for this code at all, since we don't have enable_signaling() and thus DMA_FENCE_SIGNALED_BIT will be set before we could be called. Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180605190302.18279-2-eric@anholt.net Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2018-06-21drm/v3d: Take a lock across GPU scheduler job creation and queuing.Eric Anholt
Between creation and queueing of a job, you need to prevent any other job from being created and queued. Otherwise the scheduler's fences may be signaled out of seqno order. v2: move mutex unlock to the error label. Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: 57692c94dcbe ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+") Link: https://patchwork.freedesktop.org/patch/msgid/20180606174851.12433-1-eric@anholt.net Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2018-06-20Merge drm-upstream/drm-next into drm-misc-nextGustavo Padovan
We got a few conflicts in drm_atomic.c after merging the DRM writeback support, now we need a backmerge to unlock develop development on drm-misc-next. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
2018-06-08Merge tag 'drm-misc-next-fixes-2018-05-31' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next-fixes for v4.18: Driver changes: - Plug small memory leak in vc4. (anholt) - Depend on MMU in v3d. (arnd) Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/12faab25-e809-e73c-409c-5e9c08aa351c@linux.intel.com
generated by cgit (git 2.34.1) at 2025-04-06 14:51:18 +0000