| Age | Commit message (Collapse) | Author |
|---|
|
Both struct dpu_dsc_sub_blks instances declare enc subblock length to be
0x100, while the actual length is 0x9c (last register having offset 0x98).
Reduce subblock length to remove the empty register space from being
dumped.
Fixes: 0d1b10c63346 ("drm/msm/dpu: add DSC 1.2 hw blocks for relevant chipsets")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550999/
Link: https://lore.kernel.org/r/20230802183655.4188640-2-dmitry.baryshkov@linaro.org
|
|
All DSC_BLK_1_2 declarations incorrectly pass 0x29c as the block length.
This includes the common block itself, enc subblocks and some empty
space around. Change that to pass 0x4 instead, the length of common
register block itself.
Fixes: 0d1b10c63346 ("drm/msm/dpu: add DSC 1.2 hw blocks for relevant chipsets")
Reported-by: Ryan McCann <quic_rmccann@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/550998/
Link: https://lore.kernel.org/r/20230802183655.4188640-1-dmitry.baryshkov@linaro.org
|
|
sm8550 has 16 vbif clients.
This fixes the extra 2 clients (DMA4/DMA5) not having their memtype
initialized. This fixes DMA4/DMA5 planes not displaying correctly.
Fixes: efcd0107727c ("drm/msm/dpu: add support for SM8550")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Patchwork: https://patchwork.freedesktop.org/patch/550968/
Link: https://lore.kernel.org/r/20230802134900.30435-1-jonathan@marek.ca
[DB: fixed the Fixes tag]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Currently we use the drm_dp_dpcd_read_caps() helper in the DRM side of
nouveau in order to read the DPCD of a DP connector, which makes sure we do
the right thing and also check for extended DPCD caps. However, it turns
out we're not currently doing this on the nvkm side since we don't have
access to the drm_dp_aux structure there - which means that the DRM side of
the driver and the NVKM side can end up with different DPCD capabilities
for the same connector.
Ideally in order to fix this, we just want to use the
drm_dp_read_dpcd_caps() helper in nouveau. That's not currently possible
though, and is going to depend on having a bunch of the DP code moved out
of nvkm and into the DRM side of things as part of the GSP enablement work.
Until then however, let's workaround this problem by porting a copy of
drm_dp_read_dpcd_caps() into NVKM - which should fix this issue.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/211
Link: https://patchwork.freedesktop.org/patch/msgid/20230728225858.350581-1-lyude@redhat.com
(cherry picked from commit cc4adf3a7323212f303bc9ff0f96346c44fcba06 in drm-misc-next)
Cc: <stable@vger.kernel.org> # 6.3+
Signed-off-by: Karol Herbst <kherbst@redhat.com>
|
|
We have a lurking bug where Fragment Shader Helper Invocations can't load
from memory. But this is actually required in OpenGL and is causing random
hangs or failures in random shaders.
It is unknown how widespread this issue is, but shaders hitting this can
end up with infinite loops.
We enable those only on all Kepler and newer GPUs where we use our own
Firmware.
Nvidia's firmware provides a way to set a kernelspace controlled list of
mmio registers in the gr space from push buffers via MME macros.
v2: drop code for gm200 and newer.
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: David Airlie <airlied@gmail.com>
Cc: nouveau@lists.freedesktop.org
Cc: stable@vger.kernel.org # 4.19+
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230622152017.2512101-1-kherbst@redhat.com
|
|
On system resume, the driver might call it6505_poweron directly if the
runtime PM hasn't been enabled. In such case, pm_runtime_get_if_in_use
will always return 0 because dev->power.runtime_status stays at
RPM_SUSPENDED, and the IRQ will never be handled.
Use it6505->powered from the driver struct fixes this because it always
gets updated when it6505_poweron is called.
Fixes: 5eb9a4314053 ("drm/bridge: it6505: Guard bridge power in IRQ handler")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727100131.2338127-1-treapking@chromium.org
|
|
CEC interrupt status/mask and logical address registers
will be reset when device enter suspend.
It will cause cec fail to work after device resume.
Add CEC suspend/resume functions, reinitialize logical address registers
and restore interrupt status/mask registers after resume.
Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230721124415.1513223-1-Sandor.yu@nxp.com
|
|
Add support for Innolux G156HCE-L01 15.6" 1920x1080 24bpp
dual-link LVDS TFT panel. Documentation is available at [1].
The middle frequency is tuned slightly upward from 70.93 MHz
to 72 MHz, otherwise the panel shows slight flicker.
[1] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G156HCE-L01_Rev.C3_Datasheet.pdf
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731210258.256152-2-marex@denx.de
|
|
This should be done before the soft min/max frequencies are restored.
When we disable the "Ignore efficient frequency" flag, GuC does not
actually bring the requested freq down to RPn.
Specifically, this scenario-
- ignore efficient freq set to true
- reduce min to RPn (from efficient)
- suspend
- resume (includes GuC load, restore soft min/max, restore efficient freq)
- validate min freq has been resored to RPn
This will fail if we didn't first restore(disable, in this case) efficient
freq flag before setting the soft min frequency.
v2: Bring the min freq down to RPn when we disable efficient freq (Rodrigo)
Also made the change to set the min softlimit to RPn at init. Otherwise, we
were storing RPe there.
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/8736
Fixes: 55f9720dbf23 ("drm/i915/guc/slpc: Provide sysfs for efficient freq")
Fixes: 95ccf312a1e4 ("drm/i915/guc/slpc: Allow SLPC to use efficient frequency")
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230726010044.3280402-1-vinay.belgaumkar@intel.com
|
|
The inclusion of intel_gt_defines.h was initially added to
i915_drv.h to provide the definition of I915_MAX_GT, where it was
originally defined.
However, since I915_MAX_GT is now included in
i915_gem_object_types.h, it sis no longer required in i915_drv.h.
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230801141955.383305-5-andi.shyti@linux.intel.com
|
|
With multi-GT devices, the object may have been bound on each GT.
Invalidate the TLBs across all GT before releasing the pages
back to the system.
Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Fei Yang <fei.yang@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230801141955.383305-4-andi.shyti@linux.intel.com
|
|
Create a new intel_gt_defines.h inside the gt/ directory as a
placeholder for all the generic GT based defines.
As of now place only I915_MAX_GT.
Co-developed-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230801141955.383305-3-andi.shyti@linux.intel.com
|
|
Prepare for supporting more TLB invalidation scenarios by moving
the current MMIO invalidation to its own file.
Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230801141955.383305-2-andi.shyti@linux.intel.com
|
|
Displays that are connected to the same SPI bus may share the D/C GPIO.
Use GPIOD_FLAGS_BIT_NONEXCLUSIVE to allow access to the same GPIO for
multiple panel-mipi-dbi instances. Exclusive access to the GPIO during
transfers is ensured by the locking in drm_mipi_dbi.c.
Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230724065654.5269-3-otto.pflueger@abscue.de
|
|
Multiple displays may be connected to the same bus and share a D/C GPIO,
so the display driver needs exclusive access to the bus to ensure that
it can control the D/C GPIO safely.
Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: David Lechner <david@lechnology.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230724065654.5269-2-otto.pflueger@abscue.de
|
|
This function does nothing, just clears one struct field. Drop it now.
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550210/
Link: https://lore.kernel.org/r/20230730010102.350713-11-dmitry.baryshkov@linaro.org
|
|
dpu_core_perf should not make decisions on the maximum possible core
clock rate. Pass the value from dpu_kms_hw_init() and drop handling of
core_clk from dpu_core_perf.c
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550201/
Link: https://lore.kernel.org/r/20230730010102.350713-10-dmitry.baryshkov@linaro.org
|
|
The dev_pm_opp_set_rate() already contains a call for clk_round_rate for
the passed value. Stop calling it manually from
_dpu_core_perf_get_core_clk_rate(). It is slightly incorrect to call it
this way, as we should round the final calculated clock rate rather than
rounding all the intermediate values.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550212/
Link: https://lore.kernel.org/r/20230730010102.350713-9-dmitry.baryshkov@linaro.org
|
|
Remove dpu_core_perf::dev and dpu_core_perf::debugfs_root fields, they
are not used by the code.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550200/
Link: https://lore.kernel.org/r/20230730010102.350713-8-dmitry.baryshkov@linaro.org
|
|
Simplify dpu_core_perf code by using only dpu_perf_cfg instead of using
full-featured catalog data.
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550198/
Link: https://lore.kernel.org/r/20230730010102.350713-7-dmitry.baryshkov@linaro.org
|
|
The stop_req is true only in the dpu_crtc_disable() case, when
crtc->enable has already been set to false. This renders the stop_req
argument useless. Remove it completely.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550206/
Link: https://lore.kernel.org/r/20230730010102.350713-6-dmitry.baryshkov@linaro.org
|
|
dpu_core_perf.c contains several multi-line conditions which are hard to
comprehent because of the indentation. Rework the identation of these
conditions to make it easier to understand them.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550197/
Link: https://lore.kernel.org/r/20230730010102.350713-5-dmitry.baryshkov@linaro.org
|
|
The values in struct dpu_core_perf_tune are fixed per the core perf
mode. Drop the 'tune' values and substitute them with known values when
performing perf management.
Note: min_bus_vote was not used at all, so it is just silently dropped.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550208/
Link: https://lore.kernel.org/r/20230730010102.350713-4-dmitry.baryshkov@linaro.org
|
|
Skip bandwidth aggregation and return early if there are no interconnect
paths defined for the DPU device.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/550195/
Link: https://lore.kernel.org/r/20230730010102.350713-3-dmitry.baryshkov@linaro.org
|
|
Drop the leftover of bus-client -> interconnect conversion, the enum
dpu_core_perf_data_bus_id.
Fixes: cb88482e2570 ("drm/msm/dpu: clean up references of DPU custom bus scaling")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550194/
Link: https://lore.kernel.org/r/20230730010102.350713-2-dmitry.baryshkov@linaro.org
|
|
The feature bits DPU_MDP_BWC, DPU_MDP_UBWC_1_0, and DPU_MDP_UBWC_1_5 are
not used by the driver, drop them completely.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/550056/
Link: https://lore.kernel.org/r/20230728213320.97309-8-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
As the DPU driver has switched to fetching data from MDSS driver, we can
now drop the UBWC and highest_bank_bit parts of the DPU hw catalog.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550058/
Link: https://lore.kernel.org/r/20230728213320.97309-7-dmitry.baryshkov@linaro.org
|
|
Switch to using data from MDSS driver to program the SSPP fetch and UBWC
configuration. As a side-effect, this also swithes the DPU driver from
DPU_HW_UBWC_VER_xx values to the UBWC_x_y enum, which reflects
the hardware register values.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/550054/
Link: https://lore.kernel.org/r/20230728213320.97309-6-dmitry.baryshkov@linaro.org
|
|
As we are going to use MDSS data for DPU programming, populate missing
MDSS data. The UBWC 1.0 and no UBWC cases do not require MDSS
programming, so skip them.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/550055/
Link: https://lore.kernel.org/r/20230728213320.97309-5-dmitry.baryshkov@linaro.org
|
|
DPU programming requires knowledge of some of UBWC parameters. This
results in duplication of UBWC data between MDSS and DPU drivers. Export
the required data from MDSS driver.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550052/
Link: https://lore.kernel.org/r/20230728213320.97309-4-dmitry.baryshkov@linaro.org
|
|
Rename the ubwc_version field to ubwc_enc_version, it denotes the
version of the UBWC encoder, not the "UBWC version".
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550051/
Link: https://lore.kernel.org/r/20230728213320.97309-3-dmitry.baryshkov@linaro.org
|
|
The SM8550 platform employs newer UBWC decoder, which requires slightly
different programming.
Fixes: a2f33995c19d ("drm/msm: mdss: add support for SM8550")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550049/
Link: https://lore.kernel.org/r/20230728213320.97309-2-dmitry.baryshkov@linaro.org
|
|
While reworking interrupts masks, it was easier to keep old
MDP_INTFn_7xxx_INTR and MDP_INTFn_7xxx_TEAR_INTR symbols. Now it is time
to drop them and use unified symbol names.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549656/
Link: https://lore.kernel.org/r/20230727144543.1483630-6-dmitry.baryshkov@linaro.org
|
|
Now as the list of the interrupts is constructed from the catalog
data, drop the mdss_irqs field from catalog.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549659/
Link: https://lore.kernel.org/r/20230727144543.1483630-5-dmitry.baryshkov@linaro.org
|
|
Declaring the mask of supported interrupts proved to be error-prone. It
is very easy to add a bit with no corresponding backing block or to miss
the INTF TE bit. Replace this with looping over the enabled INTF blocks
to setup the irq mask.
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549654/
Link: https://lore.kernel.org/r/20230727144543.1483630-4-dmitry.baryshkov@linaro.org
|
|
There is no point in having a single enum (and a single array) for both
DPU < 7.0 and DPU >= 7.0 interrupt registers. Instead define a single
enum and two IRQ address arrays.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Fixes: c7314613226a0 ("drm/msm: Add missing struct identifier")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549653/
Link: https://lore.kernel.org/r/20230727144543.1483630-3-dmitry.baryshkov@linaro.org
|
|
Inline __intr_offset(), there is no point in having a separate oneline
function for setting base block address.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549655/
Link: https://lore.kernel.org/r/20230727144543.1483630-2-dmitry.baryshkov@linaro.org
|
|
There is no need to call the DRM_DEV_ERROR() function directly to print
a custom message when handling an error from platform_get_irq() function
as it is going to display an appropriate error message
in case of a failure.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549499/
Link: https://lore.kernel.org/r/20230727112407.2916029-1-ruanjinjie@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The driver can be built as a module, however the lack of the
MODULE_DEVICE_TABLE macro prevents it from being automatically probed
from the DT in such case.
Add the missed macro to make sure the module can load automatically.
Fixes: 6810bb390282 ("drm/panel: Add Samsung S6D7AA0 panel controller driver")
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Acked-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230802-gt5-panel-dtable-v1-1-c0a765c175e2@trvn.ru
|
|
DRM bridges are not visible to the userspace and it may not be
immediately clear if the chain is somehow constructed incorrectly. I
have had two separate instances of a bridge driver failing to do a
drm_bridge_attach() call, resulting in the bridge connector not being
part of the chain. In some situations this doesn't seem to cause issues,
but it will if DRM_BRIDGE_ATTACH_NO_CONNECTOR flag is used.
Add a debugfs file to print the bridge chains. For me, on this TI AM62
based platform, I get the following output:
encoder[39]
bridge[0] type: 0, ops: 0x0
bridge[1] type: 0, ops: 0x0, OF: /bus@f0000/i2c@20000000/dsi@e:toshiba,tc358778
bridge[2] type: 0, ops: 0x3, OF: /bus@f0000/i2c@20010000/hdmi@48:lontium,lt8912b
bridge[3] type: 11, ops: 0x7, OF: /hdmi-connector:hdmi-connector
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230802-drm-bridge-chain-debugfs-v4-1-7e3ae3d137c0@ideasonboard.com
|
|
drm-intel-fixes
gvt-fixes-2023-08-02
- Fix bug to get AUX CH register message length (Yan)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZMnvf46JqgeIuTir@debian-scheme
|
|
Convert platform_get_resource_byname() + devm_ioremap_resource() to a
single call to devm_platform_ioremap_resource_byname(), as this is
exactly what this function does.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
It is possible that dma_request_chan() returns EPROBE_DEFER, in which
case the driver defers probing without printing any message. Use
dev_err_probe() to record the probe deferral cause and ease debugging.
Signed-off-by: Wang Ming <machel@vivo.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add check for dma_set_mask() and return the error if it fails.
Fixes: d76271d22694 ("drm: xlnx: DRM/KMS driver for Xilinx ZynqMP DisplayPort Subsystem")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
zynqmp_dp_train()
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/xlnx/zynqmp_dp.c:793: warning: expecting prototype for zynqmp_dp_link_train(). Prototype was for zynqmp_dp_train() instead
Signed-off-by: Lee Jones <lee@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Only check the conditions for unclaimed reg debug once to avoid locking
problems when i915->params.mmio_debug changes between header and footer.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8749
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a53fb0fd84c4627398ccd4304b35db05603b89b6.1690886109.git.jani.nikula@intel.com
|
|
Make it easier to have different logic for the two for follow-up.
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8a0a93f08314f8d7e222a907d9aa5e0b89cb969e.1690886109.git.jani.nikula@intel.com
|
|
These days, it's fairly common to see panels that have touchscreens
attached to them. The panel and the touchscreen can somewhat be
thought of as totally separate devices and, historically, this is how
Linux has treated them. However, treating them as separate isn't
necessarily the best way to model the two devices, it was just that
there was no better way. Specifically, there is little practical
reason to have the touchscreen powered on when the panel is turned
off, but if we model the devices separately we have no way to keep the
two devices' power states in sync with each other.
The issue described above makes it sound as if the problem here is
just about efficiency. We're wasting power keeping the touchscreen
powered up when the screen is off. While that's true, the problem can
go deeper. Specifically, hardware designers see that there's no reason
to have the touchscreen on while the screen is off and then build
hardware assuming that software would never turn the touchscreen on
while the screen is off.
In the very simplest case of hardware designs like this, the
touchscreen and the panel share some power rails. In most cases, this
turns out not to be terrible and is, again, just a little less
efficient. Specifically if we tell Linux that the touchscreen and the
panel are using the same rails then Linux will keep the rails on when
_either_ device is turned on. That ends to work OK-ish, but now if you
turn the panel off not only will the touchscreen remain powered, but
the power rails for the panel itself won't be switched off, burning
extra power.
The above two inefficiencies are _extra_ minor when you consider the
fact that laptops rarely spend much time with the screen off. The main
use case would be when an external screen (and presumably a power
supply) is attached.
Unfortunately, it gets worse from here. On sc7180-trogdor-homestar,
for instance, the display's TCON (timing controller) sometimes crashes
if you don't power cycle it whenever you stop and restart the video
stream (like during a modeset). The touchscreen keeping the power
rails on causes real problems. One proposal in the homestar timeframe
was to move the touchscreen to an always-on rail, dedicating the main
power rail to the panel. That caused _different_ problems as talked
about in commit 557e05fa9fdd ("HID: i2c-hid: goodix: Stop tying the
reset line to the regulator"). The end result of all of this was to
add an extra regulator to the board, increasing cost.
Recently, Cong Yang posted a patch [1] where things are even worse.
The panel and touch controller on that system seem even more
intimately tied together and really can't be thought of separately.
To address this issue, let's start allowing devices to register
themselves as "panel followers". These devices will get called after a
panel has been powered on and before a panel is powered off. This
makes the panel the primary device in charge of the power state, which
matches how userspace uses it.
The panel follower API should be fairly straightforward to use. The
current code assumes that panel followers are using device tree and
have a "panel" property pointing to the panel to follow. More
flexibility and non-DT implementations could be added as needed.
Right now, panel followers can follow the prepare/unprepare functions.
There could be arguments made that, instead, they should follow
enable/disable. I've chosen prepare/unprepare for now since those
functions are guaranteed to power up/power down the panel and it seems
better to start the process earlier.
A bit of explaining about why this is a roll-your-own API instead of
using something more standard:
1. In standard APIs in Linux, parent devices are automatically powered
on when a child needs power. Applying that here, it would mean that
we'd force the panel on any time someone was listening to the
touchscreen. That, unfortunately, would have broken homestar's need
(if we hadn't changed the hardware, as per above) where the panel
absolutely needs to be able to power cycle itself. While one could
argue that homestar is broken hardware and we shouldn't have the
API do backflips for it, _officially_ the eDP timing guidelines
agree with homestar's needs and the panel power sequencing diagrams
show power going off. It's nice to be able to support this.
2. We could, conceibably, try to add a new flag to device_link causing
the parent to be in charge of power. Then we could at least use
normal pm_runtime APIs. This sounds great, except that we run into
problems with initial probe. As talked about in the later patch
("HID: i2c-hid: Support being a panel follower") the initial power
on of a panel follower might need to do things (like add
sub-devices) that aren't allowed in a runtime_resume function.
The above complexities explain why this API isn't using common
functions. That being said, this patch is very small and
self-contained, so if someone was later able to adapt it to using more
common APIs while solving the above issues then that could happen in
the future.
[1] https://lore.kernel.org/r/20230519032316.3464732-1-yangcong5@huaqin.corp-partner.google.com
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727101636.v4.3.Icd5f96342d2242051c754364f4bee13ef2b986d4@changeid
|
|
In a whole pile of panel drivers, we have code to make the
prepare/unprepare/enable/disable callbacks behave as no-ops if they've
already been called. It's silly to have this code duplicated
everywhere. Add it to the core instead so that we can eventually
delete it from all the drivers. Note: to get some idea of the
duplicated code, try:
git grep 'if.*>prepared' -- drivers/gpu/drm/panel
git grep 'if.*>enabled' -- drivers/gpu/drm/panel
NOTE: arguably, the right thing to do here is actually to skip this
patch and simply remove all the extra checks from the individual
drivers. Perhaps the checks were needed at some point in time in the
past but maybe they no longer are? Certainly as we continue
transitioning over to "panel_bridge" then we expect there to be much
less variety in how these calls are made. When we're called as part of
the bridge chain, things should be pretty simple. In fact, there was
some discussion in the past about these checks [1], including a
discussion about whether the checks were needed and whether the calls
ought to be refcounted. At the time, I decided not to mess with it
because it felt too risky.
Looking closer at it now, I'm fairly certain that nothing in the
existing codebase is expecting these calls to be refcounted. The only
real question is whether someone is already doing something to ensure
prepare()/unprepare() match and enabled()/disable() match. I would say
that, even if there is something else ensuring that things match,
there's enough complexity that adding an extra bool and an extra
double-check here is a good idea. Let's add a drm_warn() to let people
know that it's considered a minor error to take advantage of
drm_panel's double-checking but we'll still make things work fine.
We'll also add an entry to the official DRM todo list to remove the
now pointless check from the panels after this patch lands and,
eventually, fixup anyone who is triggering the new warning.
[1] https://lore.kernel.org/r/20210416153909.v4.27.I502f2a92ddd36c3d28d014dd75e170c2d405a0a5@changeid
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727101636.v4.2.I59b417d4c29151cc2eff053369ec4822b606f375@changeid
|
|
Add timings for InnoLux N140HCA-EAC. This panel is found on some laptops
such as Acer Aspire 1.
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230801-aspire1-cmn-panel-v1-1-c3d88e389805@trvn.ru
|
