| Age | Commit message (Collapse) | Author |
|---|
|
Instead of multiple lockings, lock the object once,
and perform the ww dance around attach_phys and pin_pages.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-23-maarten.lankhorst@linux.intel.com
|
|
Pin in the caller, not in the work itself. This should also
work better for dma-fence annotations.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-22-maarten.lankhorst@linux.intel.com
|
|
Try to pin to ggtt first, and use a full ww loop to handle
eviction correctly.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-21-maarten.lankhorst@linux.intel.com
|
|
We map the initial context during first pin.
This allows us to remove pin_map from state allocation, which saves
us a few retry loops. We won't need this until first pin anyway.
intel_ring_submission_setup() is also reworked slightly to do all
pinning in a single ww loop.
Changes since v1:
- Handle -EDEADLK backoff in intel_ring_submission_setup() better.
- Handle smatch errors reported by Dan and testbot.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-20-maarten.lankhorst@linux.intel.com
|
|
This allows us to remove pin_map from state allocation, which saves
us a few retry loops. We won't need this until first pin, anyway.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
[danvet: Resolve context conflict because we don't have the
i915_scheduler.c extraction from the below patches set:
https://lore.kernel.org/intel-gfx/20210203165259.13087-6-chris@chris-wilson.co.uk/]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-19-maarten.lankhorst@linux.intel.com
|
|
With userptr fixed, there is no need for all separate lockdep classes
now, and we can remove all lockdep tricks used. A trylock in the
shrinker is all we need now to flatten the locking hierarchy.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
[danvet: Resolve conflict because we don't have the patch from Chris
to rebrand i915_gem_shrinker_taints_mutex to fs_reclaim_taints_mutex.
It's not a bad idea, but if we do it, it should be moved to the right
header. See
https://lore.kernel.org/intel-gfx/20210202154318.19246-1-chris@chris-wilson.co.uk/]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-18-maarten.lankhorst@linux.intel.com
|
|
Instead of doing what we do currently, which will never work with
PROVE_LOCKING, do the same as AMD does, and something similar to
relocation slowpath. When all locks are dropped, we acquire the
pages for pinning. When the locks are taken, we transfer those
pages in .get_pages() to the bo. As a final check before installing
the fences, we ensure that the mmu notifier was not called; if it is,
we return -EAGAIN to userspace to signal it has to start over.
Changes since v1:
- Unbinding is done in submit_init only. submit_begin() removed.
- MMU_NOTFIER -> MMU_NOTIFIER
Changes since v2:
- Make i915->mm.notifier a spinlock.
Changes since v3:
- Add WARN_ON if there are any page references left, should have been 0.
- Return 0 on success in submit_init(), bug from spinlock conversion.
- Release pvec outside of notifier_lock (Thomas).
Changes since v4:
- Mention why we're clearing eb->[i + 1].vma in the code. (Thomas)
- Actually check all invalidations in eb_move_to_gpu. (Thomas)
- Do not wait when process is exiting to fix gem_ctx_persistence.userptr.
Changes since v5:
- Clarify why check on PF_EXITING is (temporarily) required.
Changes since v6:
- Ensure userptr validity is checked in set_domain through a special path.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Dave Airlie <airlied@redhat.com>
[danvet: s/kfree/kvfree/ in i915_gem_object_userptr_drop_ref in the
previous review round, but which got lost. The other open questions
around page refcount are imo better discussed in a separate series,
with amdgpu folks involved].
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-17-maarten.lankhorst@linux.intel.com
|
|
Now that unsynchronized mappings are removed, the only time userptr
works is when the MMU notifier is enabled. Put all of the userptr
code behind a mmu notifier ifdef.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-16-maarten.lankhorst@linux.intel.com
|
|
We should not allow this any more, as it will break with the new userptr
implementation, it could still be made to work, but there's no point in
doing so.
Inspection of the beignet opencl driver shows that it's only used
when normal userptr is not available, which means for new kernels
you will need CONFIG_I915_USERPTR.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-15-maarten.lankhorst@linux.intel.com
|
|
There are a couple of ioctl's related to tiling and cache placement,
that make no sense for userptr, reject those:
- i915_gem_set_tiling_ioctl()
Tiling should always be linear for userptr. Changing placement will
fail with -ENXIO.
- i915_gem_set_caching_ioctl()
Userptr memory should always be cached. Changing caching mode will
fail with -ENXIO.
- i915_gem_set_domain_ioctl()
Still temporarily allowed to work as intended, it's used to check
userptr validity. With the reworked userptr code, it will keep
working for this usecase.
This plus the previous changes have been tested against beignet
by using its own unit tests, and intel-video-compute by using
piglit's opencl tests.
Changes since v1:
- set_domain was apparently used in iris for checking userptr validity,
keep it working as intended.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-14-maarten.lankhorst@linux.intel.com
|
|
It doesn't make sense to export a memory address, we will prevent
allowing access this way to different address spaces when we
rework userptr handling, so best to explicitly disable it.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-13-maarten.lankhorst@linux.intel.com
|
|
Userptr should not need the kernel for a userspace memcpy, userspace
needs to call memcpy directly.
Specifically, disable i915_gem_pwrite_ioctl() and i915_gem_pread_ioctl().
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-12-maarten.lankhorst@linux.intel.com
|
|
As soon as we install fences, we should stop allocating memory
in order to prevent any potential deadlocks.
This is required later on, when we start adding support for
dma-fence annotations.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-11-maarten.lankhorst@linux.intel.com
|
|
Simple adding of i915_gem_object_lock, we may start to pass ww to
get_pages() in the future, but that won't be the case here;
We override shmem's get_pages() handling by calling
i915_gem_object_get_pages_phys(), no ww is needed.
Changes since v1:
- Call shmem put pages directly, the callback would
go down the phys free path.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-10-maarten.lankhorst@linux.intel.com
|
|
Instead of creating a separate object type, we make changes to
the shmem type, to clear struct page backing. This will allow us to
ensure we never run into a race when we exchange obj->ops with other
function pointers.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-9-maarten.lankhorst@linux.intel.com
|
|
We want to remove the changing of ops structure for attaching
phys pages, so we need to kill off HAS_STRUCT_PAGE from ops->flags,
and put it in the bo.
This will remove a potential race of dereferencing the wrong obj->ops
without ww mutex held.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
[danvet: apply with wiggle]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-8-maarten.lankhorst@linux.intel.com
|
|
Doesn't need the full ww lock, only checking if pages are bound.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #irc
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-7-maarten.lankhorst@linux.intel.com
|
|
Currently we have a lot of places where we hold the gem object lock,
but haven't yet been converted to the ww dance. Complain loudly about
those places.
i915_vma_pin shouldn't have the obj lock held, so we can do a ww dance,
while i915_vma_pin_ww should.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #irc
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-6-maarten.lankhorst@linux.intel.com
|
|
i915_vma_pin may fail with -EDEADLK when we start locking page tables,
so ensure we handle this correctly.
Changes since v1:
- Drop -EDEADLK todo, this commit handles it.
- Change eb_pin_vma from sort-of-bool + -EDEADLK to a proper int. (Matt)
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-5-maarten.lankhorst@linux.intel.com
|
|
We need to get rid of allocations in the cmd parser, because it needs
to be called from a signaling context, first move all pinning to
execbuf, where we already hold all locks.
Allocate jump_whitelist in the execbuffer, and add annotations around
intel_engine_cmd_parser(), to ensure we only call the command parser
without allocating any memory, or taking any locks we're not supposed to.
Because i915_gem_object_get_page() may also allocate memory, add a
path to i915_gem_object_get_sg() that prevents memory allocations,
and walk the sg list manually. It should be similarly fast.
This has the added benefit of being able to catch all memory allocation
errors before the point of no return, and return -ENOMEM safely to the
execbuf submitter.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-4-maarten.lankhorst@linux.intel.com
|
|
We're starting to require the reservation lock for pinning,
so wait until we have that.
Update the selftests to handle this correctly, and ensure pin is
called in live_hwsp_rollover_user() and mock_hwsp_freelist().
Changes since v1:
- Fix NULL + XX arithmatic, use casts. (kbuild)
Changes since v2:
- Clear entire cacheline when pinning.
Changes since v3:
- CACHELINE_BYTES -> TIMELINE_SEQNO_BYTES. (jekstrand)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-3-maarten.lankhorst@linux.intel.com
|
|
Instead of sharing pages with breadcrumbs, give each timeline a
single page. This allows unrelated timelines not to share locks
any more during command submission.
As an additional benefit, seqno wraparound no longer requires
i915_vma_pin, which means we no longer need to worry about a
potential -EDEADLK at a point where we are ready to submit.
Changes since v1:
- Fix erroneous i915_vma_acquire that should be a i915_vma_release (ickle).
- Extra check for completion in intel_read_hwsp().
Changes since v2:
- Fix inconsistent indent in hwsp_alloc() (kbuild)
- memset entire cacheline to 0.
Changes since v3:
- Do same in intel_timeline_reset_seqno(), and clflush for good measure.
Changes since v4:
- Use refcounting on timeline, instead of relying on i915_active.
- Fix waiting on kernel requests.
Changes since v5:
- Bump amount of slots to maximum (256), for best wraparounds.
- Add hwsp_offset to i915_request to fix potential wraparound hang.
- Ensure timeline wrap test works with the changes.
- Assign hwsp in intel_timeline_read_hwsp() within the rcu lock to
fix a hang.
Changes since v6:
- Rename i915_request_active_offset to i915_request_active_seqno(),
and elaborate the function. (tvrtko)
Changes since v7:
- Move hunk to where it belongs. (jekstrand)
- Replace CACHELINE_BYTES with TIMELINE_SEQNO_BYTES. (jekstrand)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com> #v1
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-2-maarten.lankhorst@linux.intel.com
|
|
Use i915 prefix to avoid name collision with future vma_lookup() in mm.
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323134208.3077275-1-Liam.Howlett@Oracle.com
|
|
The rationale for this change is roughly as follows:
1. The functionality can be done entirely in userspace with a
combination of mmap + memcpy
2. The only reason anyone in userspace is still using it is because
someone implemented bo_subdata that way in libdrm ages ago and
they're all too lazy to write the 5 lines of code to do a map.
3. This falls cleanly into the category of things which will only get
more painful with local memory support.
These ioctls aren't used much anymore by "real" userspace drivers.
Vulkan has never used them and neither has the iris GL driver. The old
i965 GL driver does use PWRITE for glBufferSubData but it only supports
up through Gen11; Gen12 was never enabled in i965. The compute driver
has never used PREAD/PWRITE. The only remaining user is the media
driver which uses it exactly twice and they're easily removed [1] so
expecting them to drop it going forward is reasonable.
IGT changes which handle this kernel change have also been submitted [2].
[1] https://github.com/intel/media-driver/pull/1160
[2] https://patchwork.freedesktop.org/series/81384/
v2 (Jason Ekstrand):
- Improved commit message with the status of all usermode drivers
- A more future-proof platform check
v3 (Jason Ekstrand):
- Drop the HAS_LMEM checks as they're already covered by the version
checks
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210317234014.2271006-4-jason@jlekstrand.net
|
|
The Vulkan driver in Mesa for Intel hardware never uses relocations if
it's running on a version of i915 that supports at least softpin which
all versions of i915 supporting Gen12 do. On the OpenGL side, Gen12+ is
only supported by iris which never uses relocations. The older i965
driver in Mesa does use relocations but it only supports Intel hardware
through Gen11 and has been deprecated for all hardware Gen9+. The
compute driver also never uses relocations. This only leaves the media
driver which is supposed to be switching to softpin going forward.
Making softpin a requirement for all future hardware seems reasonable.
There is one piece of hardware enabled by default in i915: RKL which was
enabled by e22fa6f0a976 which has not yet landed in drm-next so this
almost but not really a userspace API change for RKL. If it becomes a
problem, we can always add !IS_ROCKETLAKE(eb->i915) to the condition.
Rejecting relocations starting with newer Gen12 platforms has the
benefit that we don't have to bother supporting it on platforms with
local memory. Given how much CPU touching of memory is required for
relocations, not having to do so on platforms where not all memory is
directly CPU-accessible carries significant advantages.
v2 (Jason Ekstrand):
- Allow TGL-LP platforms as they've already shipped
v3 (Jason Ekstrand):
- WARN_ON platforms with LMEM support in case the check is wrong
v4 (Jason Ekstrand):
- Call out Rocket Lake in the commit message
v5 (Jason Ekstrand):
- Drop the HAS_LMEM check as it's already covered by the version check
v6 (Jason Ekstrand):
- Move the check to eb_validate_vma() with all the other exec_object
validation checks.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210317234014.2271006-3-jason@jlekstrand.net
|
|
libdrm has supported the newer execbuffer2 ioctl and using it by default
when it exists since libdrm commit b50964027bef which landed Mar 2, 2010.
The i915 and i965 drivers in Mesa at the time both used libdrm and so
did the Intel X11 back-end. The SNA back-end for X11 has always used
execbuffer2.
v2 (Jason Ekstrand):
- Add a comment saying what Linux version it's being removed in.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Keith Packard <keithp@keithp.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210317234014.2271006-2-jason@jlekstrand.net
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
Highlights:
- Alderlake S enabling, via topic branch (Aditya, Anusha, Caz, José, Lucas, Matt, Tejas)
- Refactor display code to shrink intel_display.c etc. (Dave)
- Support more gen 9 and Tigerlake PCH combinations (Lyude, Tejas)
- Add eDP MSO support (Jani)
Display:
- Refactor to support multiple PSR instances (Gwan-gyeong)
- Link training debug logging updates (Sean)
- Updates to eDP fixed mode handling (Jani)
- Disable PSR2 on JSL/EHL (Edmund)
- Support DDR5 and LPDDR5 for bandwidth computation (Clint, José)
- Update VBT DP max link rate table (Shawn)
- Disable the QSES check for HDCP2.2 over MST (Juston)
- PSR updates, refactoring, selective fetch (José, Gwan-gyeong)
- Display init sequence refactoring (Lucas)
- Limit LSPCON to gen 9 and 10 platforms (Ankit)
- Fix DDI lane polarity per VBT info (Uma)
- Fix HDMI vswing programming location in mode set (Ville)
- Various display improvements and refactorings and cleanups (Ville)
- Clean up DDI clock routing and readout (Ville)
- Workaround async flip + VT-d corruption on HSW/BDW (Ville)
- SAGV watermark fixes and cleanups (Ville)
- Silence pipe tracepoint WARNs (Ville)
Other:
- Remove require_force_probe protection from RKL, may need to be revisited (Tejas)
- Detect loss of MMIO access (Matt)
- GVT display improvements
- drm/i915: Disable runtime power management during shutdown (Imre)
- Perf/OA updates (Umesh)
- Remove references to struct drm_device.pdev, via topic branch (Thomas)
- Backmerge (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87v99rnk1g.fsf@intel.com
|
|
drm-intel-next
gvt-next-2021-03-16
- Parse accurate vGPU virtual display rate (Colin)
- Convert vblank timer as per-vGPU based on current rate (Colin)
- spelling fix (Bhaskar)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210316074330.GC1551@zhen-hp.sh.intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.13:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- %p4cc printk format modifier
- atomic: introduce drm_crtc_commit_wait, rework atomic plane state
helpers to take the drm_commit_state structure
- dma-buf: heaps rework to return a struct dma_buf
- simple-kms: Add plate state helpers
- ttm: debugfs support, removal of sysfs
Driver Changes:
- Convert drivers to shadow plane helpers
- arc: Move to drm/tiny
- ast: cursor plane reworks
- gma500: Remove TTM and medfield support
- mxsfb: imx8mm support
- panfrost: MMU IRQ handling rework
- qxl: rework to better handle resources deallocation, locking
- sun4i: Add alpha properties for UI and VI layers
- vc4: RPi4 CEC support
- vmwgfx: doc cleanup
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210303100600.dgnkadonzuvfnu22@gilmour
|
|
One instance of DRM_DEBUG_KMS was leftover in dp_link_training, convert
it to the new shiny.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210310214845.29021-2-sean@poorly.run
|
|
This patch adds some newlines which are missing from debug messages.
This will prevent logs from being stacked up in dmesg.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210310214845.29021-1-sean@poorly.run
|
|
SAMPLE_OA parameter enables sampling of OA buffer and results in a call
to init the OA buffer which initializes the OA unit head/tail pointers.
The OA_EXPONENT parameter controls the periodicity of the OA reports in
the OA buffer and results in starting a hrtimer.
Before gen12, all use cases required the use of the OA buffer and i915
enforced this setting when vetting out the parameters passed. In these
platforms the hrtimer was enabled if OA_EXPONENT was passed. This worked
fine since it was implied that SAMPLE_OA is always passed.
With gen12, this changed. Users can use perf without enabling the OA
buffer as in OAR use cases. While an OAR use case should ideally not
start the hrtimer, we see that passing an OA_EXPONENT parameter will
start the hrtimer even though SAMPLE_OA is not specified. This results
in an uninitialized OA buffer, so the head/tail pointers used to track
the buffer are zero.
This itself does not fail, but if we ran a use-case that SAMPLED the OA
buffer previously, then the OA_TAIL register is still pointing to an old
value. When the timer callback runs, it ends up calculating a
wrong/large number of available reports. Since we do a spinlock_irq_save
and start processing a large number of reports, NMI watchdog fires and
causes a crash.
Start the timer only if SAMPLE_OA is specified.
v2:
- Drop SAMPLE OA check when appending samples (Ashutosh)
- Prevent read if OA buffer is not being sampled
Fixes: 00a7f0d7155c ("drm/i915/tgl: Add perf support on TGL")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210305210947.58751-1-umesh.nerlige.ramappa@intel.com
|
|
After is_cow_mapping() is exported in mm.h, replace some manual checks
elsewhere throughout the tree but start to use the new helper.
Link: https://lkml.kernel.org/r/20210217233547.93892-5-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@ziepe.ca>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Roland Scheidegger <sroland@vmware.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Gal Pressman <galpress@amazon.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Kirill Shutemov <kirill@shutemov.name>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Wei Zhang <wzam@amazon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Rename a bunch of the skl+ watermark struct members to
have sensible names. Avoids me having to think what
plane_res_b/etc. means.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210305153610.12177-7-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
|
|
Make the code more typo proof by extracting small helpers that
do the "do we have enough DDB for the WM level?" checks in
a consistent manner.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210305153610.12177-6-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
|
|
Let's make all the "do we have enough DDB for this WM level?"
checks use min_ddb_alloc. To achieve that we need to populate
this for the transition watermarks as well.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210305153610.12177-5-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
|
|
For non-transition watermarks we are supposed to check min_ddb_alloc
rather than plane_res_b when determining if we have enough DDB space
for it. A bit too much copy pasta made me check the wrong thing.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: df4a50a35e2c ("drm/i915: Zero out SAGV wm when we don't have enough DDB for it")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210305153610.12177-4-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
|
|
Say we have two planes enabled with watermarks configured
as follows:
plane A: wm0=enabled/can_sagv=false, wm1=enabled/can_sagv=true
plane B: wm0=enabled/can_sagv=true, wm1=disabled
This is possible since the latency we use to calculate
can_sagv may not be the same for both planes due to
skl_needs_memory_bw_wa().
In this case skl_crtc_can_enable_sagv() will see that
both planes have enabled at least one watermark level
with can_sagv==true, and thus proceeds to allow SAGV.
However, since plane B does not have wm1 enabled
plane A can't actually use it either. Thus we are
now running with SAGV enabled, but plane A can't
actually tolerate the extra latency it imposes.
To remedy this only allow SAGV on if the highest common
enabled watermark level for all active planes can tolerate
the extra SAGV latency.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210305153610.12177-3-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
|
|
On HSW/BDW with VT-d active the first tile row scanned out
after the first async flip of the frame often ends up corrupted.
Whether the corruption happens or not depends on the scanline
on which the async flip happens, but the behaviour seems very
consistent. Ie. the same set of scanlines (which are most scanlines)
always show the corruption. And another set of scanlines (far less
of them) never shows the corruption.
I discovered that disabling the fetch-stride stretching
feature cures the corruption. This is some kind of TLB related
prefetch thing AFAIK. We already disable it on SNB primary
planes due to a documented workaround. The hardware folks
indicated that disabling this should be fine, so let's go
with that.
And while we're here, let's document the relevant bits on all
pre-skl platforms.
Fixes: 2a636e240c77 ("drm/i915: Implement async flip for ivb/hsw")
Fixes: cda195f13abd ("drm/i915: Implement async flips for bdw")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210220103303.3448-1-ville.syrjala@linux.intel.com
Reviewed-by: Karthik B S <karthik.b.s@intel.com>
|
|
The index variable should only be increased in one place.
Noticed this while trying to track down another oops.
v2: use while loop.
Fixes: f295c8cfec83 ("drm/nouveau: fix dma syncing warning with debugging on.")
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210311043527.5376-1-airlied@gmail.com
|
|
Commit 311a50e76a33 ("drm/i915: Add support for mandatory cmdparsing")
introduced mandatory command parsing but setup failures were not
translated into wedging the GPU which was probably the intent.
Possible errors come in two categories. Either the sanity check on
internal tables has failed, which should be caught in CI unless an
affected platform would be missed in testing; or memory allocation failure
happened during driver load, which should be extremely unlikely but for
correctness should still be handled.
v2:
* Tidy coding style. (Chris)
[airlied: cherry-picked to avoid rc1 base]
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 311a50e76a33 ("drm/i915: Add support for mandatory cmdparsing")
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris.p.wilson@intel.com>
Reviewed-by: Chris Wilson <chris.p.wilson@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210302114213.1102223-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 5a1a659762d35a6dc51047c9127c011303c77b7f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.12-2021-03-10:
amdgpu:
- Fix aux backlight control
- Add a backlight override parameter
- Various display fixes
- PCIe DPM fix for vega
- Polaris watermark fixes
- Additional S0ix fix
radeon:
- Fix GEM regression
- Fix AGP dependency handling
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210310221141.3974-1-alexander.deucher@amd.com
|
|
Let's check that we actually found the PLL before doing the
port_clock readout, just in case the hardware was severly
misprogrammed by the previous guy. Not sure the hw would
even survive such misprogramming without hanging but no
real harm in checking anyway.
Cc: Karthik B S <karthik.b.s@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210310194351.6233-1-ville.syrjala@linux.intel.com
Reviewed-by: Karthik B S <karthik.b.s@intel.com>
|
|
Some of them have gaps, or fields we don't clear. Native ioctl code
does full copies plus zero-extends on size mismatch, so nothing can
leak. But compat is more hand-rolled so need to be careful.
None of these matter for performance, so just memset.
Also I didn't fix up the CONFIG_DRM_LEGACY or CONFIG_DRM_AGP ioctl, those
are security holes anyway.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reported-by: syzbot+620cf21140fc7e772a5d@syzkaller.appspotmail.com # vblank ioctl
Cc: syzbot+620cf21140fc7e772a5d@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210222100643.400935-1-daniel.vetter@ffwll.ch
(cherry picked from commit e926c474ebee404441c838d18224cd6f246a71b7)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
|
|
dma-buf importing was reworked in commit 7d2cd72a9aa3
("drm/shmem-helpers: Simplify dma-buf importing"). Before that commit
drm_gem_shmem_prime_import_sg_table() did set ->pages_use_count=1 and
drm_gem_shmem_vunmap_locked() could call drm_gem_shmem_put_pages()
unconditionally. Now without the use count set, put pages is called also
on dma-bufs. Fix this by only putting pages if it's not imported.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Fixes: 7d2cd72a9aa3 ("drm/shmem-helpers: Simplify dma-buf importing")
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219122203.51130-1-noralf@tronnes.org
(cherry picked from commit cdea72518a2b38207146e92e1c9e2fac15975679)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
|
|
Problem: random stucks on reboot stage about 1/20 stuck/reboots
// debug kernel log
[ 4.496660] reboot: kernel restart prepare CMD:(null)
[ 4.498114] meson_ee_pwrc c883c000.system-controller:power-controller: shutdown begin
[ 4.503949] meson_ee_pwrc c883c000.system-controller:power-controller: shutdown domain 0:VPU...
...STUCK...
Solution: add shutdown function to meson_drm driver
// debug kernel log
[ 5.231896] reboot: kernel restart prepare CMD:(null)
[ 5.246135] [drm:meson_drv_shutdown]
...
[ 5.259271] meson_ee_pwrc c883c000.system-controller:power-controller: shutdown begin
[ 5.274688] meson_ee_pwrc c883c000.system-controller:power-controller: shutdown domain 0:VPU...
[ 5.338331] reboot: Restarting system
[ 5.358293] psci: PSCI_0_2_FN_SYSTEM_RESET reboot_mode:0 cmd:(null)
bl31 reboot reason: 0xd
bl31 reboot reason: 0x0
system cmd 1.
...REBOOT...
Tested: on VIM1 VIM2 VIM3 VIM3L khadas sbcs - 1000+ successful reboots
and Odroid boards, WeTek Play2 (GXBB)
Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller")
Signed-off-by: Artem Lapkin <art@khadas.com>
Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210302042202.3728113-1-art@khadas.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
|
|
When mmapping the shmem, it would previously adjust the pgoff in the
vm_area_struct to remove the fake offset that is added to be able to
identify the buffer. This patch removes the adjustment and makes the
fault handler use the vm_fault address to calculate the page offset
instead. Although using this address is apparently discouraged, several
DRM drivers seem to be doing it anyway.
The problem with removing the pgoff is that it prevents
drm_vma_node_unmap from working because that searches the mapping tree
by address. That doesn't work because all of the mappings are at offset
0. drm_vma_node_unmap is being used by the shmem helpers when purging
the buffer.
This fixes a bug in Panfrost which is using drm_gem_shmem_purge. Without
this the mapping for the purged buffer can still be accessed which might
mean it would access random pages from other buffers
v2: Don't check whether the unsigned page_offset is less than 0.
Cc: stable@vger.kernel.org
Fixes: 17acb9f35ed7 ("drm/shmem: Add madvise state and purge helpers")
Signed-off-by: Neil Roberts <nroberts@igalia.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210223155125.199577-3-nroberts@igalia.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
|
|
When a buffer is madvised as not needed and then purged, any attempts to
access the buffer from user-space should cause a bus fault. This patch
adds a check for that.
Cc: stable@vger.kernel.org
Fixes: 17acb9f35ed7 ("drm/shmem: Add madvise state and purge helpers")
Signed-off-by: Neil Roberts <nroberts@igalia.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210223155125.199577-2-nroberts@igalia.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
|
|
The surface_id struct field in head is not being initialized and
static analysis warns that this is being passed through to
dev->monitors_config->heads[i] on an assignment. Clear up this
warning by initializing it to zero.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: a6d3c4d79822 ("qxl: hook monitors_config updates into crtc, not encoder.")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210304094928.2280722-1-colin.king@canonical.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
|
|
Freed pages are not subtracted from the allocated_pages counter in
ttm_pool_type_fini(), causing a leak in the count on device removal.
The next shrinker invocation loops forever trying to free pages that are
no longer in the pool:
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 3-....: (9998 ticks this GP) idle=54e/1/0x4000000000000000 softirq=434857/434857 fqs=2237
(t=10001 jiffies g=2194533 q=49211)
NMI backtrace for cpu 3
CPU: 3 PID: 1034 Comm: kswapd0 Tainted: P O 5.11.0-com #1
Hardware name: System manufacturer System Product Name/PRIME X570-PRO, BIOS 1405 11/19/2019
Call Trace:
<IRQ>
...
</IRQ>
sysvec_apic_timer_interrupt+0x77/0x80
asm_sysvec_apic_timer_interrupt+0x12/0x20
RIP: 0010:mutex_unlock+0x16/0x20
Code: e7 48 8b 70 10 e8 7a 53 77 ff eb aa e8 43 6c ff ff 0f 1f 00 65 48 8b 14 25 00 6d 01 00 31 c9 48 89 d0 f0 48 0f b1 0f 48 39 c2 <74> 05 e9 e3 fe ff ff c3 66 90 48 8b 47 20 48 85 c0 74 0f 8b 50 10
RSP: 0018:ffffbdb840797be8 EFLAGS: 00000246
RAX: ffff9ff445a41c00 RBX: ffffffffc02a9ef8 RCX: 0000000000000000
RDX: ffff9ff445a41c00 RSI: ffffbdb840797c78 RDI: ffffffffc02a9ac0
RBP: 0000000000000080 R08: 0000000000000000 R09: ffffbdb840797c80
R10: 0000000000000000 R11: fffffffffffffff5 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000084 R15: ffffffffc02a9a60
ttm_pool_shrink+0x7d/0x90 [ttm]
ttm_pool_shrinker_scan+0x5/0x20 [ttm]
do_shrink_slab+0x13a/0x1a0
...
debugfs shows the incorrect total:
$ cat /sys/kernel/debug/dri/0/ttm_page_pool
--- 0--- --- 1--- --- 2--- --- 3--- --- 4--- --- 5--- --- 6--- --- 7--- --- 8--- --- 9--- ---10---
wc : 0 0 0 0 0 0 0 0 0 0 0
uc : 0 0 0 0 0 0 0 0 0 0 0
wc 32 : 0 0 0 0 0 0 0 0 0 0 0
uc 32 : 0 0 0 0 0 0 0 0 0 0 0
DMA uc : 0 0 0 0 0 0 0 0 0 0 0
DMA wc : 0 0 0 0 0 0 0 0 0 0 0
DMA : 0 0 0 0 0 0 0 0 0 0 0
total : 3029 of 8244261
Using ttm_pool_type_take() to remove pages from the pool before freeing
them correctly accounts for the freed pages.
Fixes: d099fc8f540a ("drm/ttm: new TT backend allocation pool v3")
Signed-off-by: Anthony DeRossi <ajderossi@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210303011723.22512-1-ajderossi@gmail.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
|
