Age | Commit message (Collapse) | Author |
|
atom bios header files are not required in these files.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
SDMA 4.x is not part of the GFX power domain so this is
not necessary.
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use DC_LOG_DEBUG instead of pr_info to match other uses in dc.c.
Fixes: 091e301c2b41 ("drm/amd/display: Add debug messages for dc_validate_boot_timing()")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
link_enc_cfg_get_link_enc_used_by_stream() is no longer used after
2021's:
commit 6366b00346c0 ("drm/amd/display: Maintain consistent mode of
operation during encoder assignment")
which introduces and uses the _current version instead.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
get_max_support_fbc_buffersize() is unused since 2021's
commit 94f0d0c80cf3 ("drm/amd/display/dc/dce110/dce110_compressor: Remove
unused function 'dce110_get_required_compressed_surfacesize")
removed it's only caller.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
hubbub1_toggle_watermark_change_req() last use was removed in 2017 by
commit b8fce2c9d773 ("drm/amd/display: Optimize programming front end")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
get_clock_requirements_for_state() was added in 2018 by
commit 8ab2180f96f5 ("drm/amd/display: Add function to fetch clock
requirements")
but never used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The last user of dc_stream_get_crtc_position() was
mod_freesync_get_v_position() which is removed in a previous
patch in this series.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
mod_freesync_get_vmin_vmax() and mod_freesync_get_v_position() were
added in 2017 by
commit 72ada5f76939 ("drm/amd/display: FreeSync Auto Sweep Support")
mod_freesync_is_valid_range() was added in 2018 by
commit e80e94460841 ("drm/amd/display: add method to check for supported
range")
mod_freesync_get_settings() was added in 2018 by
commit a3e1737ed61c ("drm/amd/display: Implement stats logging")
and
mod_freesync_calc_field_rate_from_timing() was added in 2020 by
commit 49c70ece54b0 ("drm/amd/display: Change input parameter for
set_drr")
None of these have been used.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
mpc1_is_mpcc_idle() was added in 2017 by
commit feb4a3cd8eb0 ("drm/amd/display: Integrating MPC pseudocode")
but never used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
JPEG 5.0.1 supports upto 10 rings, however PMFW support for SMU v13.0.6
variants is now limited to 8 per instance. Limit to 8 temporarily to
avoid out of bounds access.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add register list and enable devcoredump for JPEG5_0_0
V2: (Lijo)
- remove version specific callbacks and use simplified helper functions
V3: (Lijo)
- move amdgpu_jpeg_reg_dump_fini() to sw_fini() and avoid the call here
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add register list and enable devcoredump for JPEG2_5_0
V2: (Lijo)
- remove version specific callbacks and use simplified helper functions
V3: (Lijo)
- move amdgpu_jpeg_reg_dump_fini() to sw_fini() and avoid the call here
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add register list and enable devcoredump for JPEG2_0_0
V2: (Lijo)
- remove version specific callbacks and use simplified helper functions
V3: (Lijo)
- move amdgpu_jpeg_reg_dump_fini() to sw_fini() and avoid the call here
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add register list and enable devcoredump for JPEG3_0_0
V2: (Lijo)
- remove version specific callbacks and use simplified helper functions
V3: (Lijo)
- move amdgpu_jpeg_reg_dump_fini() to sw_fini() and avoid the call here
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add register list and enable devcoredump for JPEG4_0_5
V2: (Lijo)
- remove version specific callbacks and use simplified helper functions
V3: (Lijo)
- move amdgpu_jpeg_reg_dump_fini() to sw_fini() and avoid the call here
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add register list and enable devcoredump for JPEG4_0_0
V2: (Lijo)
- remove version specific callbacks and use simplified helper functions
V3: (Lijo)
- move amdgpu_jpeg_reg_dump_fini() to sw_fini() and avoid the call here
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add register list and enable devcoredump for JPEG5_0_1
V2: (Lijo)
- remove version specific callbacks and use simplified helper functions
V3: (Lijo)
- move amdgpu_jpeg_reg_dump_fini() to sw_fini() and avoid the call here
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add register list and enable devcoredump for JPEG4_0_3
V2: (Lijo)
- remove version specific callbacks and use simplified helper functions
V3: (Lijo)
- move amdgpu_jpeg_reg_dump_fini() to sw_fini() and avoid the call here
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add devcoredump helper functions that can be reused for all jpeg versions.
V2: (Lijo)
- add amdgpu_jpeg_reg_dump_init() and amdgpu_jpeg_reg_dump_fini()
- use reg_list and reg_count from init() to dump and print registers
- memory allocation and freeing is moved to the init() and fini()
V3: (Lijo)
- move amdgpu_jpeg_reg_dump_fini() to sw_fini()
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Make psp_vbflash_status and psp_vbflash available in sysfs
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Skip P2S table load for SMU v13.0.12
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add new IP version support
Signed-off-by: Mangesh Gadre <Mangesh.Gadre@amd.com>
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add new IP version support
Signed-off-by: Mangesh Gadre <Mangesh.Gadre@amd.com>
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add new IP version support
Signed-off-by: Mangesh Gadre <Mangesh.Gadre@amd.com>
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add new IP version support
Signed-off-by: Mangesh Gadre <Mangesh.Gadre@amd.com>
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
- Move SPL to a new path
- Request HW cursor on DCN3.2 with SubVP
- Allow reuse of of DCN4x code
- Enable odm 4:1 when debug key is set
- Fix seamless boot sequence
- Support multiple options during psr entry.
- Revert "Exit idle optimizations before attempt to access PHY"
- Fix out-of-bound accesses
- Fixes for mcache programming in DML21
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY & HOW]
- Move SPL from dc/spl to dc/sspl
- Update build files and header paths
- Remove dc/spl files
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
When SubVP is active the HW cursor size is limited to 64x64, and
anything larger will force composition which is bad for gaming on
DCN3.2 if the game uses a larger cursor.
[HOW]
If HW cursor is requested, typically by a fullscreen game, do not
enable SubVP so that up to 256x256 cursor sizes are available for
DCN3.2.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Aric Cyr <Aric.Cyr@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove the static qualifier to make it available for code sharing
with other components.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Dmytro <dmytro.laktyushkin@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHAT]
odm 4to1 is enabled when debug key is set.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Muhammad Ahmed <muhammad.ahmed@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add an inline function to calculate core specific register offsets for
JPEG v4.0.3 and reuse it, makes code more readable and easier to align.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
Some panels may not handle idle pattern properly during PSR entry.
[HOW]
Add a condition to allow multiple options on power down
sequence during PSR1 entry.
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Martin Tsai <Martin.Tsai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit de612738e9771bd66aeb20044486c457c512f684.
Reason to revert: screen flashes or gray screen appeared half of the
screen after resume from S4/S5.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Brandon Syu <Brandon.Syu@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY & HOW]
- Fix indexing phantom planes for mcache programming in the wrapper
- Fix phantom mcache allocations to align with HW guidance
- Fix mcache assignment for chroma plane for multi-planar formats
Reviewed-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Clean up some IP version checks in gmcv9.0
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove unnecessary IP version checks for GFX 9.4.3 and similar variants.
Wrap checks inside meaningful function.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
IP tables with version <=2 may use harvest bit. For version 3 and above,
harvest bit is not applicable, instead uses harvest table. Fix the
logic accordingly.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use IP instance number and hwid as function args for validation checks.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable the cleaner shader for GFX10.1.1/10.1.2 GPUs to provide data
isolation between GPU workloads. The cleaner shader is responsible for
clearing the Local Data Store (LDS), Vector General Purpose Registers
(VGPRs), and Scalar General Purpose Registers (SGPRs), which helps
prevent data leakage and ensures accurate computation results.
This update extends cleaner shader support to GFX10.1.1/10.1.2 GPUs,
previously available for GFX10.1.10. It enhances security by clearing
GPU memory between processes and maintains a consistent GPU state across
KGD and KFD workloads.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Consolidate PM4 definitions. Most of these were previously
only defined in UMDs. Add them here as well and sync with
latest packets. Also no need to include soc15d.h on gfx10+.
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Suggested-by: Saurabh Verma <saurabh.verma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This version brings along the following fixes:
- Fixes on psr_version, dcn35 register address, DCPG OP control sequences
- Imporvements to CR AUX RD interval interpretation, dio link encoder
- Disable PSR-SU on some OLED panels
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
We would like to have new dio encoder assigning flow.
Which should be aligned with hpo assigning and have
simple logic and data representation.
[HOW}
1. A new config option to enable/disable the new code.
2. Encoder-link mapping is in res_ctx and assigned encoder.
is accessed through pipe_ctx.
3. assign dio encoder when add stream to ctx
Reviewed-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
In some situations, dc->res_pool may be null.
[HOW]
Check if pointer is null before dereference.
Reviewed-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Sung Lee <Sung.Lee@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Spread on DPREFCLK by 0.3 percent can have a negative effect on sink
when PHY SSC is also spread by 0.3 percent
[How]
Add boot option for DMU to lower PHY SSC
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY&HOW]
IP_REQUEST_CNTL should only be toggled off when it was originally, never
unconditionally.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
PSR-SU may cause some glitching randomly on some OLED panel.
[How]
Disable the PSR-SU for certain PSR-SU OLED panel.
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Bandwidth
[Why]
1) The current calculations for OTO prefetch bandwidth do not consider the number of DPP pipes in use.
As a result, OTO prefetch bandwidth may be larger than the vactive bandwidth if multiple DPP pipes are used.
OTO prefetch bandwidth should never exceed the vactive bandwidth.
2) Mode programming may be mismatched with mode support
In cases where mode support has chosen to use the equalized (equ) prefetch schedule,
mode programming may end up using oto prefetch schedule instead.
The bandwidth required to do the oto schedule may end up being higher than the equ schedule.
This can cause the required urgent bandwidth to exceed the available urgent bandwidth.
[How]
Output the oto prefetch bandwidth and incorperate it into the urgent bandwidth calculations
even if the prefetch schedule being used is not the oto schedule.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
The double buffer cursor registers is updated by the cursor
vupdate event. There is a gap between vupdate and cursor data
fetch if cursor fetch data reletive to cursor position.
Cursor corruption will happen if we update the cursor surface
in this gap.
[How]
Modify the cursor request mode to the beginning prefetch always
and avoid wraparound calculation issues.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
DP spec updated to have the CR AUX RD interval match the EQ AUX RD
interval interpretation of DPCD 0000Eh/0220Eh for 8b/10b non-LTTPR mode
and LTTPR transparent mode cases.
[How]
Update interpretation of DPCD 0000Eh/0220Eh for CR AUX RD interval
during 8b/10b link training.
Reviewed-by: Michael Strauss <michael.strauss@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|