summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm
AgeCommit message (Collapse)Author
2020-09-09drm/imx: compile imx directory by defaultLaurentiu Palcu
Currently the drm/imx/ directory is compiled only if DRM_IMX is set. Adding a new IMX related IP in the same directory would need DRM_IMX to be set, which would bring in also IPUv3 core driver... The current patch would allow adding new IPs in the imx/ directory without needing to set DRM_IMX. Signed-off-by: Laurentiu Palcu <laurentiu.palcu@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/20200731081836.3048-2-laurentiu.palcu@oss.nxp.com
2020-09-09gpu/drm: cleanup coding style a bitBernard Zhao
Remove first assignment to info which is meaningless. Put the width and higth check first. This change is to make the code a bit readable. Signed-off-by: Bernard Zhao <bernard@vivo.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200907123129.27905-1-bernard@vivo.com
2020-09-09drm/virtio: report uuid in debugfsGurchetan Singh
In keeping with other features, report this in the debugfs. Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20200902210847.2689-4-gurchetansingh@chromium.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-09-09drm/virtio: fix uninitialized variableGurchetan Singh
smatch reported this with the blob series: drivers/gpu/drm/virtio/virtgpu_kms.c:227 virtio_gpu_init() error: uninitialized symbol 'ret'. Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20200902210847.2689-3-gurchetansingh@chromium.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-09-09Fix use after free in get_capset_info callback.Doug Horn
If a response to virtio_gpu_cmd_get_capset_info takes longer than five seconds to return, the callback will access freed kernel memory in vg->capsets. Signed-off-by: Doug Horn <doughorn@google.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200902210847.2689-2-gurchetansingh@chromium.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-09-09drm: allow limiting the scatter list size.Gerd Hoffmann
Add drm_device argument to drm_prime_pages_to_sg(), so we can call dma_max_mapping_size() to figure the segment size limit and call into __sg_alloc_table_from_pages() with the correct limit. This fixes virtio-gpu with sev. Possibly it'll fix other bugs too given that drm seems to totaly ignore segment size limits so far ... v2: place max_segment in drm driver not gem object. v3: move max_segment next to the other gem fields. v4: just use dma_max_mapping_size(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20200907112425.15610-2-kraxel@redhat.com
2020-09-09drm/ttm: drop the tt backend function paths.Dave Airlie
These are now driver side. Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200907204630.1406528-14-airlied@gmail.com
2020-09-09drm/ttm/agp: remove bdev from agp helpersDave Airlie
Since the agp bind/unbind/destroy are now getting called from drivers rather than via the func table, drop the bdev parameter. Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200907204630.1406528-13-airlied@gmail.com
2020-09-09drm/ttm: get rid of agp specific populate/unpopulate paths.Dave Airlie
Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200907204630.1406528-12-airlied@gmail.com
2020-09-09drm/ttm/agp: drop back end bindings from agpDave Airlie
These aren't used anymore. Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200907204630.1406528-11-airlied@gmail.com
2020-09-09drm/gem_vram/ttm: move to driver backend destroy function.Dave Airlie
Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200907204630.1406528-10-airlied@gmail.com
2020-09-09drm/amdgpu/ttm: move to driver backend binding funcsDave Airlie
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200907204630.1406528-9-airlied@gmail.com
2020-09-09drm/vmwgfx: move to driver binding functionsDave Airlie
Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200907204630.1406528-8-airlied@gmail.com
2020-09-09drm/nouveau/ttm: use driver bind/unbind/destroy functions.Dave Airlie
Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200907204630.1406528-7-airlied@gmail.com
2020-09-09drm/radeon/ttm: move to driver binding/destroy functions. (v2)Dave Airlie
Do agp decision in the driver, instead of special binding funcs v2: use container_of, drop some {}. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200907204630.1406528-6-airlied@gmail.com
2020-09-09drm/ttm/agp: export bind/unbind/destroy for drivers to use.Dave Airlie
Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200907204630.1406528-5-airlied@gmail.com
2020-09-09drm/qxl: move bind/unbind/destroy to the driver function table.Dave Airlie
Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200907204630.1406528-4-airlied@gmail.com
2020-09-09drm/ttm: add optional bind/unbind via driver.Dave Airlie
I want to remove the backend funcs Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200907204630.1406528-3-airlied@gmail.com
2020-09-09drm/ttm: introduce ttm_bo_move_nullDave Airlie
This pattern is cut-n-pasted across 4 drivers, switch it to a WARN_ON instead, as BUG_ON is considered a bad idea usually. Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200907204630.1406528-2-airlied@gmail.com
2020-09-08drm/ttm: merge offset and base in ttm_bus_placementChristian König
This is used by TTM to communicate the physical address which should be used with ioremap(), ioremap_wc(). We don't need to separate the base and offset in any way here. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/389457/
2020-09-08drm/qxl: don't touch mem.bus.offsetChristian König
This is internal to TTM and should not be used by drivers directly. Drop the call to qxl_ttm_io_mem_reserve() and use mem->start instead. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/389456/
2020-09-08drm/bridge: dw-mipi-dsi: fix dw_mipi_dsi_debugfs_show/write warningsNeil Armstrong
This fixes the following warnings while building in W=1 : dw-mipi-dsi.c:1002:5: warning: no previous prototype for 'dw_mipi_dsi_debugfs_write' [-Wmissing-prototypes] dw-mipi-dsi.c:1027:5: warning: no previous prototype for 'dw_mipi_dsi_debugfs_show' [-Wmissing-prototypes] Fixes: e2435d69204c ("drm/bridge: dw-mipi-dsi.c: Add VPG runtime config through debugfs") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Angelo Ribeiro <angelo.ribeiro@synopsys.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20200907102711.23748-1-narmstrong@baylibre.com
2020-09-07drm/vkms: Add support for writebackRodrigo Siqueira
This patch implements the necessary functions to add writeback support for vkms. This feature is useful for testing compositors if you don't have hardware with writeback support. Change in V4 (Emil and Melissa): - Move signal completion above drm_crtc_add_crc_entry() - Make writeback always available - Use appropriate namespace - Drop fb check in vkms_wb_atomic_commit - Make vkms_set_composer visible for writeback code - Enable composer operation on prepare_job and disable it on cleanup_job - Drop extra space at the end of the file - Rebase Change in V3 (Daniel): - If writeback is enabled, compose everything into the writeback buffer instead of CRC private buffer - Guarantees that the CRC will match exactly what we have in the writeback buffer. Change in V2: - Rework signal completion (Brian) - Integrates writeback with active_planes (Daniel) - Compose cursor (Daniel) Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200830142000.146706-4-rodrigosiqueiramelo@gmail.com
2020-09-07drm/vkms: Compute CRC without change input dataRodrigo Siqueira
This commit decouples pixel manipulation from compute_crc() for avoiding any pixel change during the CRC calculation. This commits represents a preparation work for making VKMS able to support the writeback feature. Change in V5 (Melissa): - Rebase and drop bitmap for alpha Change in V4 (Emil): - Move bitmap_clear operation and comments to get_pixel function Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Reviewed-by: Melissa Wen <melissa.srw@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200830142000.146706-3-rodrigosiqueiramelo@gmail.com
2020-09-07drm/vkms: Decouple crc operations from composerRodrigo Siqueira
In the vkms_composer.c, some of the functions related to CRC and compose have interdependence between each other. This patch reworks some functions inside vkms_composer to make crc and composer computation decoupled. This patch is preparation work for making vkms able to support new features. Tested-by: Melissa Wen <melissa.srw@gmail.com> Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Reviewed-by: Melissa Wen <melissa.srw@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200830142000.146706-2-rodrigosiqueiramelo@gmail.com
2020-09-08drm/ttm: remove bdev from ttm_ttDave Airlie
I want to split this structure up and use it differently, step one remove bdev pointer from it and pass it explicitly. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826014428.828392-4-airlied@gmail.com
2020-09-07drm/vc4: drv: Support BCM2711Maxime Ripard
The BCM2711 has a reworked display pipeline, and the load tracker needs some adjustment to operate properly. Let's add a compatible for BCM2711 and disable the load tracker until properly supported. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/beac4f9ef0261bca731a0402c8354e9af740519c.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Support the BCM2711 HDMI controllersMaxime Ripard
Now that the driver is ready for it, let's bring in the HDMI controllers variants for the BCM2711. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/b540c7a9ebb7ad51da39271a8388b69c7e27e582.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Add pixel BVB clock controlHoegeun Kwon
The BCM2711 has another clock that needs to be ramped up depending on the pixel rate: the pixel BVB clock. Add the code to adjust that clock when changing the mode. [Maxime: Changed the commit log, used clk_set_min_rate] Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20200901040759.29992-3-hoegeun.kwon@samsung.com Link: https://patchwork.freedesktop.org/patch/msgid/d757ddd6549da140f178563e5fd2bf1d129913fd.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Switch to blank pixels when disabledMaxime Ripard
In order to avoid pixels getting stuck in an unflushable FIFO, we need when we disable the HDMI controller to switch away from getting our pixels from the pixelvalve and instead use blank pixels, and switch back to the pixelvalve when we enable the HDMI controller. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/fde3efb1ad79f4476a73d310cbba3ec07dc6dabe.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Do the VID_CTL configuration at onceMaxime Ripard
The VID_CTL setup is done in several places in the driver even though it's not really required. Let's simplify it a bit to do the configuration in one go. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/08e7ebb605a560fcc149b69b4af52753a7870b2f.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Implement finer-grained hooksMaxime Ripard
In order to prevent some pixels getting stuck in an unflushable FIFO on bcm2711, we need to enable the HVS, the pixelvalve (the CRTC) and the HDMI controller (the encoder) in an intertwined way, and with tight delays. However, the atomic callbacks don't really provide a way to work with either constraints, so we need to roll our own callbacks so that we can provide those guarantees. Since those callbacks have been implemented and called in the CRTC code, we can just implement them in the HDMI driver now. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/2e9226d971117065f3b97e597f04f7fe2f0c134c.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Always recenter the HDMI FIFOMaxime Ripard
In order to avoid a pixel getting stuck in an unflushable FIFO, we need to recenter the FIFO every time we're doing a modeset and not only if we're connected to an HDMI monitor. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/b3faaf05ac6c4d3c364d28fa441571eb85903269.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Remove register dumps in enableMaxime Ripard
The current code has some logic, disabled by default, to dump the register setup in the HDMI controller. However, since we're going to split those functions in multiple, shorter, functions that only make sense where they are called in sequence, keeping the register dump makes little sense. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/c8c8d388f2d32fc3536336be36d003a862487eb7.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Deal with multiple ALSA cardsMaxime Ripard
The HDMI driver was registering a single ALSA card so far with the name vc4-hdmi. Obviously, this is not going to work anymore when we will have multiple HDMI controllers since we will end up trying to register two files with the same name. Let's use the variant to avoid that name conflict. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/e60a37444e848a384a45707a21d6df8883115f86.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Add audio-related callbacksDave Stevenson
The audio configuration has changed for the BCM2711, with notably a different parent clock and a different channel configuration. Make that modular to be able to support the BCM2711. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://patchwork.freedesktop.org/patch/msgid/85a8ca721c2d800be758c55870cea98536749680.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Set the b-frame marker to the match ALSA's default.Dave Stevenson
ALSA's iec958 plugin by default sets the block start preamble to 8, whilst this driver was programming the hardware to expect 0xF. Amend the hardware config to match ALSA. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://patchwork.freedesktop.org/patch/msgid/d0b126deb228baf1244c91e02ac0a8f7c9c60dc5.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Reset audio infoframe on encoder_enable if previously streamingDave Stevenson
If the encoder is disabled and re-enabled (eg mode change) all infoframes are reset, whilst the audio subsystem know nothing about this change. The driver therefore needs to reinstate the audio infoframe for itself. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://patchwork.freedesktop.org/patch/msgid/cd579ccc2c9b9d2fce0ebaf32f847cedb0e4a7a2.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Use reg-names to retrieve the HDMI audio registersDave Stevenson
The register range used for audio setup in the previous generations of SoC were always the second range in the device tree. However, now that the BCM2711 has way more register ranges, it makes sense to retrieve it by names for it, while preserving the id-based lookup as a fallback. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://patchwork.freedesktop.org/patch/msgid/a1ba5605fe1006a1ead5262ef3d66ea5d0750381.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Use clk_set_min_rate insteadMaxime Ripard
The HSM clock needs to be running at 101% the pixel clock of the HDMI controller, however it's shared between the two HDMI controllers, which means that if the resolutions are different between the two HDMI controllers, and the lowest resolution is on the second (in enable order) controller, the first HDMI controller will end up with a smaller than expected clock rate. Since we don't really need an exact frequency there, we can simply change the minimum rate we expect instead. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/821992209cc0d7a83254bf26fe2bf507ef0994d2.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rateMaxime Ripard
The HSM clock needs to be setup at around 101% of the pixel rate. This was done previously by setting the clock rate to 163.7MHz at probe time and only check in mode_valid whether the mode pixel clock was under the pixel clock +1% or not. However, with 4k we need to change that frequency to a higher frequency than 163.7MHz, and yet want to have the lowest clock as possible to have a decent power saving. Let's change that logic a bit by setting the clock rate of the HSM clock to the pixel rate at encoder_enable time. This would work for the BCM2711 that support 4k resolutions and has a clock that can provide it, but we still have to take care of a 4k panel plugged on a BCM283x SoCs that wouldn't be able to use those modes, so let's define the limit in the variant. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/7e692ddc231d33dd671e70ea04dd1dcf56c1ecb3.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Rename drm_encoder pointer in mode_validMaxime Ripard
The mode_valid hook on the encoder uses a pointer to a drm_encoder called crtc, which is pretty confusing. Let's rename it to encoder to make it clear what it is. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/7fbabab03992efe4a3a3640ac5ee2bb49b1c7338.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Remove unused CEC_CLOCK_DIV defineMaxime Ripard
The CEC_CLOCK_DIV define is not used anywhere in the driver, let's remove it. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/53805cc47e99a137e5f08c92fb781cc2e2134299.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Add CEC support flagMaxime Ripard
Similarly to the audio support, CEC support is not there yet for the BCM2711, so let's skip entirely the CEC initialization through a variant flag. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/bd0c4afa83b4e121692352cdc2dd1886162c7552.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Move CEC init to its own functionMaxime Ripard
The CEC init code was put directly into the bind function, which was quite inconsistent with how the audio support was done, and would prevent us from further changes to skip that initialisation entirely. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/21f4717e076291522d0784a7fd3774d8e97eaf01.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Deal with multiple debugfs filesMaxime Ripard
The HDMI driver was registering a single debugfs file so far with the name hdmi_regs. Obviously, this is not going to work anymore when will have multiple HDMI controllers since we will end up trying to register two files with the same name. Let's use the variant to avoid that name conflict. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/9505c1eb40b3ef3709277bf9e8af77917b249c32.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Store the encoder type in the variant structureMaxime Ripard
The vc4 CRTC will use the encoder type to control its output clock muxing. However, this will be different from HDMI0 to HDMI1, so let's store our type in the variant structure so that we can support multiple controllers later on. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/2736a86b498551ba9dbc5803c5bb910627a2550c.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Add a set_timings callbackMaxime Ripard
Similarly to the previous patches, the timings setup in the HDMI controller of the BCM2711 is slightly different, mostly because it supports higher resolutions and thus needed more spaces for the various timings, resulting in the register layout changing. Let's add a callback for that as well. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/0cfcbb379212f90b4abc76c0ccf3b90d1d7c0268.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Add a CSC setup callbackMaxime Ripard
Similarly to the previous patches, the CSC setup is slightly different in the BCM2711 than in the previous generations. Let's add a callback for it. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/5c19bbf10153cb42ca0fb67e08606c8295c17236.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Add PHY RNG enable / disable functionMaxime Ripard
Let's continue the implementation of hooks for the parts that change in the BCM2711 SoC with the PHY RNG setup. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/216155f1c0b83e622ac60a2f7d00eb707de3acba.1599120059.git-series.maxime@cerno.tech
generated by cgit (git 2.34.1) at 2025-04-03 04:05:59 +0000