| Age | Commit message (Collapse) | Author |
|---|
|
This update eases to understand the VTG programming.
It also sets a VTG output id for each supported connectors.
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
|
|
sti now support of atomic modesetting so set the flag to enable it.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
|
|
fix x/y typo while setting cursor coordinates
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
|
|
Set CRTC modesetting parameters to avoid warnings in atomic mode.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
|
|
In some cases last_close() could be called before sti_gdp_disable()
and make kernel crash because mixer structure has been destroy.
Let's gdp keep a reference on vtg to fix that (like it is already done
in HQVDP)
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
|
|
The layer enumeration start with 0 (0-15 for LS1021a and 0-63 for
Vybrid) whereas the register enumeration start from 1 (1-10 for
LS1021a and 1-9 for Vybrid). The loop started off from 0 for both
iterations and initialized the number of layers inclusive, which
is one layer too many.
All extensively written registers seem to be unassigned, it seems
that the write to those registers did not do any harm in practice.
Signed-off-by: Stefan Agner <stefan@agner.ch>
|
|
The current default configuration is as follows:
- Invert VSYNC signal (active LOW)
- Invert HSYNC signal (active LOW)
The mode flags allow to specify the required polarity per
mode. Furthermore, none of the current driver settings is
actually a standard polarity.
This patch applies the current driver default polarities as
explicit flags to the display which has been introduced with
the driver (NEC WQVGA "nec,nl4827hc19-05b"). The driver now
also parses the flags field and applies the configuration
accordingly, by using the following values as standard
polarities: (e.g. when no flags are specified):
- VSYNC signal not inverted (active HIGH)
- HSYNC signal not inverted (active HIGH)
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
|
|
Fix alpha blending by enabling alpha blending for the whole frame if
a color mode with alpha channel is selected (DRM_FORMAT_ARGB*). Also
support color modes without alpha channel (DRM_FORMAT_XRGB*) by just
not enabling alpha blending on layer level.
Signed-off-by: Stefan Agner <stefan@agner.ch>
|
|
The state of the interrupt mask register on initialization is
unknown, e.g. U-Boot could already used the DCU. So depending on
the boot loader, the outcome of the interrupt mask register could
be different. A defined state is much more preferable. Also, there
is no value in keeping interrupts enabled which we don't need.
Therefor, mask all interrupts on initialization.
Signed-off-by: Stefan Agner <stefan@agner.ch>
|
|
If initialization fails (e.g. due to missing panel node or deferred
probe) make sure to roll-back all operations and return the error
code.
Signed-off-by: Stefan Agner <stefan@agner.ch>
|
|
Improve error handling during CRTC initialization. Especially avoid
memory leaks in the primary plane initialization error path.
Signed-off-by: Stefan Agner <stefan@agner.ch>
|
|
It is not common to do regmap return value checks, especially not
for memory mapped device. We can rule out most error returns since
the conditions are static and we know they are ok (e.g. offset
aligned to register stride). Also without proper error handling
they are not really valuable for the user. Hence remove most of
them.
The check in the interrupt handler is worth keeping since a
volatile register won't be readable in case register caching is
still enabled.
Signed-off-by: Stefan Agner <stefan@agner.ch>
|
|
Since we are using cached registers, we need to specify volatile
registers explicitly to avoid reading their value from the cache.
This allows to read the correct interrupt status in fsl_dcu_drm_irq
and clear the asserted bits only.
Signed-off-by: Stefan Agner <stefan@agner.ch>
|
|
For state->fb or state->crtc may be NULL in fsl_dcu_drm_plane_atomic_check
function, if so, return 0.
Signed-off-by: Meng Yi <meng.yi@nxp.com>
Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
|
|
Those formats are supported on Gen3 only.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Print a message when the HDMI I2C slave encoder can't be found to help
debugging probe deferral issues.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
The LVDS encoder differs slightly in Gen3 SoCs in its PLL configuration.
Add support for the Gen3 LVDS PLL parameters and startup procedure.
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
The bit is named PLLON in the datasheet, rename it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
The frequency checks don't match the datasheet, fix them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Replace the duplicate code by a single central function.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Document the R8A7795-specific DT bindings and support them in the
driver. The HDMI and LVDS outputs are currently not supported.
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
The ODDF signal, output by default on the ODDF pin, isn't used on any
board supported in the kernel. As the Gen3 Salvator-X board uses the
ODDF pin as a DISP signal, hardcode that configuration in the driver.
Use of the ODDF signal will be implemented later through proper DT-based
configuration of the DU pins.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
The DE signal is currently configured to be identical to the DISP
signal and is used for the same purpose. To make it clearer that the
DISP pin outputs the DISP signal, select it explicitly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
The Gen3 R8A7795 DU has 4 CRTCs, support them all.
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
LVDS support depends on DRM_RCAR_DU which already depends on OF. Drop
the explicit dependency.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
The R8A7795 SoC is ARM64-based and include a DU. Enable driver
compilation on ARM64.
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Use %tu instead of %u to print difference between pointers.
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
On R-Car Gen3 SoCs the DU lost its ability to access memory directly and
needs to work in conjunction with the VSP to do so. This commit handles
the VSP internally to hide it from the user.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
The plane allocator is specific to DU planes and won't be used for
VSP-based planes, move it with the rest of the DU planes code where it
belongs.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Plane sources are configured by the VSPS bit in the PnDDCR4 register.
Although the datasheet states that the bit is updated during vertical
blanking, it seems that updates only occur when the DU group is held in
reset through the DSYSR.DRES bit. Restart the group if the source
changes.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Configure the plane source at plane setup time to source frames from
memory or from the VSP1.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
The R8A7790 DU can source frames directly from the VSP1 devices VSPD0
and VSPD1. VSPD0 feeds DU0/1 plane 0, and VSPD1 feeds either DU2 plane 0
or DU0/1 plane 1.
Allocate the correct fixed plane when sourcing frames from VSPD0 or
VSPD1, and allocate planes in reverse index order otherwise to ensure
maximum availability of planes 0 and 1.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Rename plane setup functions using more explicit names, and use local
variables to store intermediate values to increase readability. This
also prepares for VSP compositor support.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
There's no need for a read-modify-write pattern, all register bits can
be set explicitly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
A disabled CRTC can't display planes, the driver shouldn't try to
configure it when updating planes. The DRM core will store the plane
state for us, and the plane will be configured appropriately the next
time the CRTC is enabled.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
The atomic framework guarantees that the CRTC enable and disable
functions will only be called when needed, there's no need to duplicate
the CRTC state check. By replacing the local CRTC enabled state check at
resume time with the CRTC active state we can remove the local CRTC
enabled state altogether.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
The drm driver .load() operation is prone to race conditions as it
initializes the driver after registering the device nodes. Its usage is
deprecated, inline it in the probe function and call drm_dev_alloc() and
drm_dev_register() explicitly.
For consistency inline the .unload() handler in the remove function as
well.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
https://github.com/markyzq/kernel-drm-rockchip into drm-next
add Innosilicon HDMI support.
* 'drm-rockchip-next-2016-02-18' of https://github.com/markyzq/kernel-drm-rockchip:
dt-bindings: add document for Innosilicon HDMI on Rockchip platform
drm/rockchip: hdmi: add Innosilicon HDMI support
|
|
This pull request brings in overlay plane support for vc4.
* tag 'drm-vc4-next-2016-02-17' of github.com:anholt/linux:
drm/vc4: Add support for YUV planes.
drm/vc4: Add support a few more RGB display plane formats.
drm/vc4: Add support for scaling of display planes.
drm/vc4: Fix which value is being used for source image size.
drm/vc4: Add more display planes to each CRTC.
drm/vc4: Make the CRTCs cooperate on allocating display lists.
drm/vc4: Add a proper short-circut path for legacy cursor updates.
drm/vc4: Move the plane clipping/scaling setup to a separate function.
drm/vc4: Add missing __iomem annotation to hw_dlist.
drm/vc4: Improve comments on vc4_plane_state members.
|
|
into drm-next
First radeon and amdgpu pull request for 4.6. Highlights:
- ACP support for APUs with i2s audio
- CS ioctl optimizations
- GPU scheduler optimizations
- GPUVM optimizations
- Initial GPU reset support (not enabled yet)
- New powerplay sysfs interface for manually selecting clocks
- Powerplay fixes
- Virtualization fixes
- Removal of hw semaphore support
- Lots of other misc fixes and cleanups
* 'drm-next-4.6' of git://people.freedesktop.org/~agd5f/linux: (118 commits)
drm/amdgpu: Don't call interval_tree_remove in amdgpu_mn_destroy
drm/amdgpu: Fix race condition in amdgpu_mn_unregister
drm/amdgpu: cleanup gem init/finit
drm/amdgpu: rework GEM info printing
drm/amdgpu: print the GPU offset as well in gem_info
drm/amdgpu: optionally print the pin count in gem_info as well
drm/amdgpu: print the BO size only once in amdgpu_gem_info
drm/amdgpu: print pid as integer
drm/amdgpu: remove page flip work queue v3
drm/amdgpu: stop blocking for page filp fences
drm/amdgpu: stop calling amdgpu_gpu_reset from the flip code
drm/amdgpu: remove fence reset detection leftovers
drm/amdgpu: Fix race condition in MMU notifier release
drm/radeon: Fix WARN_ON if DRM_DP_AUX_CHARDEV is enabled
drm/amdgpu/vi: move uvd tiling config setup into uvd code
drm/amdgpu/vi: move sdma tiling config setup into sdma code
drm/amdgpu/cik: move uvd tiling config setup into uvd code
drm/amdgpu/cik: move sdma tiling config setup into sdma code
drm/amdgpu/gfx7: rework gpu_init()
drm/amdgpu/gfx: clean up harvest configuration (v2)
...
|
|
git://anongit.freedesktop.org/drm-intel into drm-next
Misc stuff all over:
- more mode_fixup removal from Carlos, there's another final pile still
left.
- final bits of vgaswitcheroo from Lukas for apple gmux, we're still
discussing an api cleanup patch to make it a bit more abuse-safe as a
follow-up
- dp aux interface for userspace for tools&tests from Rafael Antognolli
- actual interface parts for dma-buf flushing for userspace mmap
- few small bits all over
- vgaswitcheroo support for apple gmux from Lukas Wunner
- checks for ->mode_fixup in non-atomic helpers from Carlos Palminha, plus
removing dummy funcs from drivers. Carlos promised to follow up with
more, since there's lots more silly dummy functions around.
- dma-buf patches from Tiago, except the ioctl itself (that needed a
respin to address review from David Herrmann)
- encoder mask for atomic from Maarten
- bunch of random things all over.
* tag 'topic/drm-misc-2016-02-18' of git://anongit.freedesktop.org/drm-intel: (57 commits)
drm/udl: Use module_usb_driver
drm: fixes crct set_mode when crtc mode_fixup is null.
drm/tilcdc: removed optional dummy encoder mode_fixup function.
drm/sti: removed optional dummy encoder mode_fixup function.
drm/rockchip: removed optional dummy encoder mode_fixup function.
drm/qxl: removed optional dummy encoder mode_fixup function.
drm/mgag200: removed optional dummy encoder mode_fixup function.
drm/msm/mdp: removed optional dummy encoder mode_fixup function.
drm/imx: removed optional dummy encoder mode_fixup function.
drm/gma500: removed optional dummy encoder mode_fixup function.
drm/radeon: removed optional dummy encoder mode_fixup function.
drm/cirrus: removed optional dummy encoder mode_fixup function.
drm/bochs: removed optional dummy encoder mode_fixup function.
drm/ast: removed optional dummy encoder mode_fixup function.
drm/amdgpu: removed optional dummy encoder mode_fixup function.
drm/exynos: removed optional dummy encoder mode_fixup function.
drm/udl: removed optional dummy encoder mode_fixup function.
drm/virtio: removed optional dummy encoder mode_fixup function.
drm/fb_helper: Use add_one_connector in add_all_connectors.
drm/fb_helper: Use correct allocation count for arrays.
...
|
|
The Innosilicon HDMI is a low power HDMI 1.4 transmitter
IP, and it have been integrated on some rockchip CPUs
(like RK3036, RK312x).
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
|
|
rbtree_postorder_for_each_entry_safe can skip over some entries if
the tree is rebalanced in interval_tree_remove. interval_tree_remove
is also redundant when the tree is just about to be freed.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
|
|
Exchange locking order of adev->mn_lock and mm_sem, so that
rmn->mm->mmap_sem can be taken safely, protected by adev->mn_lock,
when amdgpu_mn_destroy runs concurrently.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
|
|
Macro module_usb_driver is used for drivers whose init and exit paths
only register and unregister to usb API. So remove boilerplate code to
make code simpler by using module_usb_driver.
This change was made with the help of the following Coccinelle
semantic patch:
//<smpl>
@a@
identifier f, x;
@@
-static f(...) { return usb_register(&x); }
@b depends on a@
identifier e, a.x;
@@
-static e(...) { usb_deregister(&x); }
@c depends on a && b@
identifier a.f;
declarer name module_init;
@@
-module_init(f);
@d depends on a && b && c@
identifier b.e, a.x;
declarer name module_exit;
declarer name module_usb_driver;
@@
-module_exit(e);
+module_usb_driver(x);
//</smpl>
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160217121327.GA29682@amitoj-Inspiron-3542
|
|
Pull in pile of patches from Carlos to remove now redundant mode_fixup
hooks for encoders.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
Remove the double housekeeping and use something sane to
forcefuly delete BOs on unload.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Print BOs grouped per client.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To easily find which memory is used.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Usefull when debugging page flipping.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
|
