summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2017-11-13Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "Yet another big pile of changes: - More year 2038 work from Arnd slowly reaching the point where we need to think about the syscalls themself. - A new timer function which allows to conditionally (re)arm a timer only when it's either not running or the new expiry time is sooner than the armed expiry time. This allows to use a single timer for multiple timeout requirements w/o caring about the first expiry time at the call site. - A new NMI safe accessor to clock real time for the printk timestamp work. Can be used by tracing, perf as well if required. - A large number of timer setup conversions from Kees which got collected here because either maintainers requested so or they simply got ignored. As Kees pointed out already there are a few trivial merge conflicts and some redundant commits which was unavoidable due to the size of this conversion effort. - Avoid a redundant iteration in the timer wheel softirq processing. - Provide a mechanism to treat RTC implementations depending on their hardware properties, i.e. don't inflict the write at the 0.5 seconds boundary which originates from the PC CMOS RTC to all RTCs. No functional change as drivers need to be updated separately. - The usual small updates to core code clocksource drivers. Nothing really exciting" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits) timers: Add a function to start/reduce a timer pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday() timer: Prepare to change all DEFINE_TIMER() callbacks netfilter: ipvs: Convert timers to use timer_setup() scsi: qla2xxx: Convert timers to use timer_setup() block/aoe: discover_timer: Convert timers to use timer_setup() ide: Convert timers to use timer_setup() drbd: Convert timers to use timer_setup() mailbox: Convert timers to use timer_setup() crypto: Convert timers to use timer_setup() drivers/pcmcia: omap1: Fix error in automated timer conversion ARM: footbridge: Fix typo in timer conversion drivers/sgi-xp: Convert timers to use timer_setup() drivers/pcmcia: Convert timers to use timer_setup() drivers/memstick: Convert timers to use timer_setup() drivers/macintosh: Convert timers to use timer_setup() hwrng/xgene-rng: Convert timers to use timer_setup() auxdisplay: Convert timers to use timer_setup() sparc/led: Convert timers to use timer_setup() mips: ip22/32: Convert timers to use timer_setup() ...
2017-11-13Merge branch 'locking-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core locking updates from Ingo Molnar: "The main changes in this cycle are: - Another attempt at enabling cross-release lockdep dependency tracking (automatically part of CONFIG_PROVE_LOCKING=y), this time with better performance and fewer false positives. (Byungchul Park) - Introduce lockdep_assert_irqs_enabled()/disabled() and convert open-coded equivalents to lockdep variants. (Frederic Weisbecker) - Add down_read_killable() and use it in the VFS's iterate_dir() method. (Kirill Tkhai) - Convert remaining uses of ACCESS_ONCE() to READ_ONCE()/WRITE_ONCE(). Most of the conversion was Coccinelle driven. (Mark Rutland, Paul E. McKenney) - Get rid of lockless_dereference(), by strengthening Alpha atomics, strengthening READ_ONCE() with smp_read_barrier_depends() and thus being able to convert users of lockless_dereference() to READ_ONCE(). (Will Deacon) - Various micro-optimizations: - better PV qspinlocks (Waiman Long), - better x86 barriers (Michael S. Tsirkin) - better x86 refcounts (Kees Cook) - ... plus other fixes and enhancements. (Borislav Petkov, Juergen Gross, Miguel Bernal Marin)" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits) locking/x86: Use LOCK ADD for smp_mb() instead of MFENCE rcu: Use lockdep to assert IRQs are disabled/enabled netpoll: Use lockdep to assert IRQs are disabled/enabled timers/posix-cpu-timers: Use lockdep to assert IRQs are disabled/enabled sched/clock, sched/cputime: Use lockdep to assert IRQs are disabled/enabled irq_work: Use lockdep to assert IRQs are disabled/enabled irq/timings: Use lockdep to assert IRQs are disabled/enabled perf/core: Use lockdep to assert IRQs are disabled/enabled x86: Use lockdep to assert IRQs are disabled/enabled smp/core: Use lockdep to assert IRQs are disabled/enabled timers/hrtimer: Use lockdep to assert IRQs are disabled/enabled timers/nohz: Use lockdep to assert IRQs are disabled/enabled workqueue: Use lockdep to assert IRQs are disabled/enabled irq/softirqs: Use lockdep to assert IRQs are disabled/enabled locking/lockdep: Add IRQs disabled/enabled assertion APIs: lockdep_assert_irqs_enabled()/disabled() locking/pvqspinlock: Implement hybrid PV queued/unfair locks locking/rwlocks: Fix comments x86/paravirt: Set up the virt_spin_lock_key after static keys get initialized block, locking/lockdep: Assign a lock_class per gendisk used for wait_for_completion() workqueue: Remove now redundant lock acquisitions wrt. workqueue flushes ...
2017-11-09Merge tag 'drm-intel-fixes-2017-11-08' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix possible NULL dereference (Chris). - Avoid miss usage of syncobj by rejecting unknown flags (Tvrtko). * tag 'drm-intel-fixes-2017-11-08' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915: Deconstruct struct sgt_dma initialiser drm/i915: Reject unknown syncobj flags
2017-11-08drm/i915: Deconstruct struct sgt_dma initialiserChris Wilson
gcc-4.4 complains about: struct sgt_dma iter = { .sg = vma->pages->sgl, .dma = sg_dma_address(iter.sg), .max = iter.dma + iter.sg->length, }; drivers/gpu/drm/i915/i915_gem_gtt.c: In function ‘gen8_ppgtt_insert_4lvl’: drivers/gpu/drm/i915/i915_gem_gtt.c:938: error: ‘iter.sg’ is used uninitialized in this function drivers/gpu/drm/i915/i915_gem_gtt.c:939: error: ‘iter.dma’ is used uninitialized in this function and worse generates invalid code that triggers a GPF: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: gen8_ppgtt_insert_4lvl+0x1b/0x1e0 [i915] PGD 0 Oops: 0000 [#1] SMP Modules linked in: snd_aloop nf_conntrack_ipv6 nf_defrag_ipv6 nf_log_ipv6 ip6table_filter ip6_tables ctr ccm xt_state nf_log_ipv4 nf_log_common xt_LOG xt_limit xt_recent xt_owner xt_addrtype iptable_filter ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack libcrc32c ip_tables dm_mod vhost_net macvtap macvlan vhost tun kvm_intel kvm irqbypass uas usb_storage hid_multitouch btusb btrtl uvcvideo videobuf2_v4l2 videobuf2_core videodev media videobuf2_vmalloc videobuf2_memops sg ppdev dell_wmi sparse_keymap mei_wdt sd_mod iTCO_wdt iTCO_vendor_support rtsx_pci_ms memstick rtsx_pci_sdmmc mmc_core dell_smm_hwmon hwmon dell_laptop dell_smbios dcdbas joydev input_leds hci_uart btintel btqca btbcm bluetooth parport_pc parport i2c_hid intel_lpss_acpi intel_lpss pcspkr wmi int3400_thermal acpi_thermal_rel dell_rbtn mei_me mei snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic ahci libahci acpi_pad xhci_pci xhci_hcd snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore int3403_thermal arc4 e1000e ptp pps_core i2c_i801 iwlmvm mac80211 rtsx_pci iwlwifi cfg80211 rfkill intel_pch_thermal processor_thermal_device int340x_thermal_zone intel_soc_dts_iosf i915 video fjes CPU: 2 PID: 2408 Comm: X Not tainted 4.10.0-rc5+ #1 Hardware name: Dell Inc. Latitude E7470/0T6HHJ, BIOS 1.11.3 11/09/2016 task: ffff880219fe4740 task.stack: ffffc90005f98000 RIP: 0010:gen8_ppgtt_insert_4lvl+0x1b/0x1e0 [i915] RSP: 0018:ffffc90005f9b8c8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8802167d8000 RCX: 0000000000000001 RDX: 00000000ffff7000 RSI: ffff880219f94140 RDI: ffff880228444000 RBP: ffffc90005f9b948 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000080 R13: 0000000000000001 R14: ffffc90005f9bcd7 R15: ffff88020c9a83c0 FS: 00007fb53e1ee920(0000) GS:ffff88024dd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 000000022ef95000 CR4: 00000000003406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ppgtt_bind_vma+0x40/0x50 [i915] i915_vma_bind+0xcb/0x1c0 [i915] __i915_vma_do_pin+0x6e/0xd0 [i915] i915_gem_execbuffer_reserve_vma+0x162/0x1d0 [i915] i915_gem_execbuffer_reserve+0x4fc/0x510 [i915] ? __kmalloc+0x134/0x250 ? i915_gem_wait_for_error+0x25/0x100 [i915] ? i915_gem_wait_for_error+0x25/0x100 [i915] i915_gem_do_execbuffer+0x2df/0xa00 [i915] ? drm_malloc_gfp.clone.0+0x42/0x80 [i915] ? path_put+0x22/0x30 ? __check_object_size+0x62/0x1f0 ? terminate_walk+0x44/0x90 i915_gem_execbuffer2+0x95/0x1e0 [i915] drm_ioctl+0x243/0x490 ? handle_pte_fault+0x1d7/0x220 ? i915_gem_do_execbuffer+0xa00/0xa00 [i915] ? handle_mm_fault+0x10d/0x2a0 vfs_ioctl+0x18/0x30 do_vfs_ioctl+0x14b/0x3f0 SyS_ioctl+0x92/0xa0 entry_SYSCALL_64_fastpath+0x1a/0xa9 RIP: 0033:0x7fb53b4fcb77 RSP: 002b:00007ffe0c572898 EFLAGS: 00003246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fb53e17c038 RCX: 00007fb53b4fcb77 RDX: 00007ffe0c572900 RSI: 0000000040406469 RDI: 000000000000000b RBP: 00007fb5376d67e0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000028 R11: 0000000000003246 R12: 0000000000000000 R13: 0000000000000000 R14: 000055eecb314d00 R15: 000055eecb315460 Code: 0f 84 5d ff ff ff eb a2 0f 1f 84 00 00 00 00 00 55 48 89 e5 41 57 41 56 41 55 41 54 53 48 83 ec 58 0f 1f 44 00 00 31 c0 89 4d b0 <4c> 8b 60 10 44 8b 70 0c 48 89 d0 4c 8b 2e 48 c1 e8 27 25 ff 01 RIP: gen8_ppgtt_insert_4lvl+0x1b/0x1e0 [i915] RSP: ffffc90005f9b8c8 CR2: 0000000000000010 Recent gccs, such as 4.9, 6.3 or 7.2, do not generate the warning nor do they explode on use. If we manually create the struct using locals from the stack, this should eliminate this issue, and does not alter code generation with gcc-7.2. Fixes: 894ccebee2b0 ("drm/i915: Micro-optimise gen8_ppgtt_insert_entries()") Reported-by: Kelly French <kfrench@federalhill.net> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kelly French <kfrench@federalhill.net> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171106211128.12538-1-chris@chris-wilson.co.uk Tested-by: Kelly French <kfrench@federalhill.net> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (cherry picked from commit 5684514ba9dc6d7aa932cc53d97d866b2386221f) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2017-11-08drm/i915: Reject unknown syncobj flagsTvrtko Ursulin
We have to reject unknown flags for uAPI considerations, and also because the curent implementation limits their i915 storage space to two bits. v2: (Chris Wilson) * Fix fail in ABI check. * Added unknown flags and BUILD_BUG_ON. v3: * Use ARCH_KMALLOC_MINALIGN instead of alignof. (Chris Wilson) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: cf6e7bac6357 ("drm/i915: Add support for drm syncobjs") Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171031102326.9738-1-tvrtko.ursulin@linux.intel.com (cherry picked from commit ebcaa1ff8b59097805d548fe7a676f194625c033) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2017-11-07Merge branch 'linus' into locking/core, to resolve conflictsIngo Molnar
Conflicts: include/linux/compiler-clang.h include/linux/compiler-gcc.h include/linux/compiler-intel.h include/uapi/linux/stddef.h Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-07Merge branch 'drm-vmwgfx-fixes' of ↵Dave Airlie
git://people.freedesktop.org/~syeh/repos_linux into drm-fixes One vmwgfx blackscreen fix and trivial patch. * 'drm-vmwgfx-fixes' of git://people.freedesktop.org/~syeh/repos_linux: drm/vmwgfx: Fix Ubuntu 17.10 Wayland black screen issue drm/vmwgfx: constify vmw_fence_ops
2017-11-03Merge tag 'drm-fixes-for-v4.14-rc8' of ↵Linus Torvalds
git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: - one nouveau regression fix - some amdgpu fixes for stable to fix hangs on some harvested Polaris GPUs - a set of KASAN and regression fixes for i915, their CI system seems to be working pretty well now. * tag 'drm-fixes-for-v4.14-rc8' of git://people.freedesktop.org/~airlied/linux: drm/amdgpu: allow harvesting check for Polaris VCE drm/amdgpu: return -ENOENT from uvd 6.0 early init for harvesting drm/i915: Check incoming alignment for unfenced buffers (on i915gm) drm/nouveau/kms/nv50: use the correct state for base channel notifier setup drm/i915: Hold rcu_read_lock when iterating over the radixtree (vma idr) drm/i915: Hold rcu_read_lock when iterating over the radixtree (objects) drm/i915/edp: read edp display control registers unconditionally drm/i915: Do not rely on wm preservation for ILK watermarks drm/i915: Cancel the modeset retry work during modeset cleanup
2017-11-02drm/etnaviv: Convert timers to use timer_setup()Kees Cook
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Russell King <linux+etnaviv@armlinux.org.uk> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: etnaviv@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-02Merge tag 'spdx_identifiers-4.14-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull initial SPDX identifiers from Greg KH: "License cleanup: add SPDX license identifiers to some files Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: License cleanup: add SPDX license identifier to uapi header files with a license License cleanup: add SPDX license identifier to uapi header files with no license License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02Merge branch 'drm-fixes-4.14' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes Just two small patches for stable to fix the driver failing to load on polaris cards with harvested VCE or UVD blocks. * 'drm-fixes-4.14' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: allow harvesting check for Polaris VCE drm/amdgpu: return -ENOENT from uvd 6.0 early init for harvesting
2017-11-01drm/amdgpu: allow harvesting check for Polaris VCELeo Liu
Fixes init failures on Polaris cards with harvested VCE blocks. Signed-off-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2017-11-01drm/amdgpu: return -ENOENT from uvd 6.0 early init for harvestingLeo Liu
Fixes init failures on polaris cards with harvested UVD. Signed-off-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2017-11-02Merge tag 'drm-intel-fixes-2017-11-01' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes Fixes for Stable: - Fix KBL Blank Screen (Jani) - Fix FIFO Underrun on SNB (Maarten) Other fixes: - Fix GPU Hang on i915gm (Chris) - Fix gem_tiled_pread_pwrite IGT case (Chris) - Cancel modeset retry work during modeset clean-up (Manasi) * tag 'drm-intel-fixes-2017-11-01' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915: Check incoming alignment for unfenced buffers (on i915gm) drm/i915: Hold rcu_read_lock when iterating over the radixtree (vma idr) drm/i915: Hold rcu_read_lock when iterating over the radixtree (objects) drm/i915/edp: read edp display control registers unconditionally drm/i915: Do not rely on wm preservation for ILK watermarks drm/i915: Cancel the modeset retry work during modeset cleanup
2017-11-01drm: gma500: Convert timers to use timer_setup()Kees Cook
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-11-01drm/vmwgfx: Fix Ubuntu 17.10 Wayland black screen issueSinclair Yeh
This is an extension of Commit 7c20d213dd3c ("drm/vmwgfx: Work around mode set failure in 2D VMs") With Wayland desktop and atomic mode set, during the mode setting process there is a moment when two framebuffer sized surfaces are being pinned. This was not an issue with Xorg. Since this only happens during a mode change, there should be no performance impact by increasing allowable mem_size. Signed-off-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Cc: stable@vger.kernel.org
2017-11-01drm/vmwgfx: constify vmw_fence_opsArvind Yadav
vmw_fence_ops are not supposed to change at runtime. Functions "dma_fence_init" working with const vmw_fence_ops provided by <linux/dma-fence.h>. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
2017-11-01drm/i915: Check incoming alignment for unfenced buffers (on i915gm)Chris Wilson
In case the object has changed tiling between calls to execbuf, we need to check if the existing offset inside the GTT matches the new tiling constraint. We even need to do this for "unfenced" tiled objects, where the 3D commands use an implied fence and so the object still needs to match the physical fence restrictions on alignment (only required for gen2 and early gen3). In commit 2889caa92321 ("drm/i915: Eliminate lots of iterations over the execobjects array"), the idea was to remove the second guessing and only set the NEEDS_MAP flag when required. However, the entire check for an unusable offset for fencing was removed and not just the secondary check. I.e. /* avoid costly ping-pong once a batch bo ended up non-mappable */ if (entry->flags & __EXEC_OBJECT_NEEDS_MAP && !i915_vma_is_map_and_fenceable(vma)) return !only_mappable_for_reloc(entry->flags); was entirely removed as the ping-pong between execbuf passes was fixed, but its primary purpose in forcing unaligned unfenced access to be rebound was forgotten. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103502 Fixes: 2889caa92321 ("drm/i915: Eliminate lots of iterations over the execobjects array") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171031103607.17836-1-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (cherry picked from commit 1d033beb20d6d5885587a02a393b6598d766a382) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2017-11-01Merge branch 'linux-4.14' of git://github.com/skeggsb/linux into drm-fixesDave Airlie
single nouveau regression fix. * 'linux-4.14' of git://github.com/skeggsb/linux: drm/nouveau/kms/nv50: use the correct state for base channel notifier setup
2017-11-01drm/nouveau/kms/nv50: use the correct state for base channel notifier setupBen Skeggs
Fixes: 857263 ("drm/nouveau: Handle drm_atomic_helper_swap_state failure") Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Tested-by: Lyude Paul <lyude@redhat.com> Reviewed by: Lyude Paul <lyude@redhat.com>
2017-10-30drm/i915: Hold rcu_read_lock when iterating over the radixtree (vma idr)Chris Wilson
Kasan spotted [IGT] gem_tiled_pread_pwrite: exiting, ret=0 ================================================================== BUG: KASAN: use-after-free in __i915_gem_object_reset_page_iter+0x15c/0x170 [i915] Read of size 8 at addr ffff8801359da310 by task kworker/3:2/182 CPU: 3 PID: 182 Comm: kworker/3:2 Tainted: G U 4.14.0-rc6-CI-Custom_3340+ #1 Hardware name: Intel Corp. Geminilake/GLK RVP1 DDR4 (05), BIOS GELKRVPA.X64.0062.B30.1708222146 08/22/2017 Workqueue: events __i915_gem_free_work [i915] Call Trace: dump_stack+0x68/0xa0 print_address_description+0x78/0x290 ? __i915_gem_object_reset_page_iter+0x15c/0x170 [i915] kasan_report+0x23d/0x350 __asan_report_load8_noabort+0x19/0x20 __i915_gem_object_reset_page_iter+0x15c/0x170 [i915] ? i915_gem_object_truncate+0x100/0x100 [i915] ? lock_acquire+0x380/0x380 __i915_gem_object_put_pages+0x30d/0x530 [i915] __i915_gem_free_objects+0x551/0xbd0 [i915] ? lock_acquire+0x13e/0x380 __i915_gem_free_work+0x4e/0x70 [i915] process_one_work+0x6f6/0x1590 ? pwq_dec_nr_in_flight+0x2b0/0x2b0 worker_thread+0xe6/0xe90 ? pci_mmcfg_check_reserved+0x110/0x110 kthread+0x309/0x410 ? process_one_work+0x1590/0x1590 ? kthread_create_on_node+0xb0/0xb0 ret_from_fork+0x27/0x40 Allocated by task 1801: save_stack_trace+0x1b/0x20 kasan_kmalloc+0xee/0x190 kasan_slab_alloc+0x12/0x20 kmem_cache_alloc+0xdc/0x2e0 radix_tree_node_alloc.constprop.12+0x48/0x330 __radix_tree_create+0x274/0x480 __radix_tree_insert+0xa2/0x610 i915_gem_object_get_sg+0x224/0x670 [i915] i915_gem_object_get_page+0xb5/0x1c0 [i915] i915_gem_pread_ioctl+0x822/0xf60 [i915] drm_ioctl_kernel+0x13f/0x1c0 drm_ioctl+0x6cf/0x980 do_vfs_ioctl+0x184/0xf30 SyS_ioctl+0x41/0x70 entry_SYSCALL_64_fastpath+0x1c/0xb1 Freed by task 37: save_stack_trace+0x1b/0x20 kasan_slab_free+0xaf/0x190 kmem_cache_free+0xbf/0x340 radix_tree_node_rcu_free+0x79/0x90 rcu_process_callbacks+0x46d/0xf40 __do_softirq+0x21c/0x8d3 The buggy address belongs to the object at ffff8801359da0f0 which belongs to the cache radix_tree_node of size 576 The buggy address is located 544 bytes inside of 576-byte region [ffff8801359da0f0, ffff8801359da330) The buggy address belongs to the page: page:ffffea0004d67600 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0 flags: 0x8000000000008100(slab|head) raw: 8000000000008100 0000000000000000 0000000000000000 0000000100110011 raw: ffffea0004b52920 ffffea0004b38020 ffff88015b416a80 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801359da200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8801359da280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8801359da300: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc ^ ffff8801359da380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8801359da400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Disabling lock debugging due to kernel taint which looks like the slab containing the radixtree iter was freed as we traversed the tree, taking the rcu read lock across the loop should prevent that (deferring all the frees until the end). Reported-by: Tomi Sarvela <tomi.p.sarvela@intel.com> Fixes: d1b48c1e7184 ("drm/i915: Replace execbuf vma ht with an idr") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171026130032.10677-2-chris@chris-wilson.co.uk Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com> (cherry picked from commit 547da76b5777859f98bb78e6b57f19463f803c04) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2017-10-30drm/i915: Hold rcu_read_lock when iterating over the radixtree (objects)Chris Wilson
Kasan spotted [IGT] gem_tiled_pread_pwrite: exiting, ret=0 ================================================================== BUG: KASAN: use-after-free in __i915_gem_object_reset_page_iter+0x15c/0x170 [i915] Read of size 8 at addr ffff8801359da310 by task kworker/3:2/182 CPU: 3 PID: 182 Comm: kworker/3:2 Tainted: G U 4.14.0-rc6-CI-Custom_3340+ #1 Hardware name: Intel Corp. Geminilake/GLK RVP1 DDR4 (05), BIOS GELKRVPA.X64.0062.B30.1708222146 08/22/2017 Workqueue: events __i915_gem_free_work [i915] Call Trace: dump_stack+0x68/0xa0 print_address_description+0x78/0x290 ? __i915_gem_object_reset_page_iter+0x15c/0x170 [i915] kasan_report+0x23d/0x350 __asan_report_load8_noabort+0x19/0x20 __i915_gem_object_reset_page_iter+0x15c/0x170 [i915] ? i915_gem_object_truncate+0x100/0x100 [i915] ? lock_acquire+0x380/0x380 __i915_gem_object_put_pages+0x30d/0x530 [i915] __i915_gem_free_objects+0x551/0xbd0 [i915] ? lock_acquire+0x13e/0x380 __i915_gem_free_work+0x4e/0x70 [i915] process_one_work+0x6f6/0x1590 ? pwq_dec_nr_in_flight+0x2b0/0x2b0 worker_thread+0xe6/0xe90 ? pci_mmcfg_check_reserved+0x110/0x110 kthread+0x309/0x410 ? process_one_work+0x1590/0x1590 ? kthread_create_on_node+0xb0/0xb0 ret_from_fork+0x27/0x40 Allocated by task 1801: save_stack_trace+0x1b/0x20 kasan_kmalloc+0xee/0x190 kasan_slab_alloc+0x12/0x20 kmem_cache_alloc+0xdc/0x2e0 radix_tree_node_alloc.constprop.12+0x48/0x330 __radix_tree_create+0x274/0x480 __radix_tree_insert+0xa2/0x610 i915_gem_object_get_sg+0x224/0x670 [i915] i915_gem_object_get_page+0xb5/0x1c0 [i915] i915_gem_pread_ioctl+0x822/0xf60 [i915] drm_ioctl_kernel+0x13f/0x1c0 drm_ioctl+0x6cf/0x980 do_vfs_ioctl+0x184/0xf30 SyS_ioctl+0x41/0x70 entry_SYSCALL_64_fastpath+0x1c/0xb1 Freed by task 37: save_stack_trace+0x1b/0x20 kasan_slab_free+0xaf/0x190 kmem_cache_free+0xbf/0x340 radix_tree_node_rcu_free+0x79/0x90 rcu_process_callbacks+0x46d/0xf40 __do_softirq+0x21c/0x8d3 The buggy address belongs to the object at ffff8801359da0f0 which belongs to the cache radix_tree_node of size 576 The buggy address is located 544 bytes inside of 576-byte region [ffff8801359da0f0, ffff8801359da330) The buggy address belongs to the page: page:ffffea0004d67600 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0 flags: 0x8000000000008100(slab|head) raw: 8000000000008100 0000000000000000 0000000000000000 0000000100110011 raw: ffffea0004b52920 ffffea0004b38020 ffff88015b416a80 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801359da200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8801359da280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8801359da300: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc ^ ffff8801359da380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8801359da400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Disabling lock debugging due to kernel taint which looks like the slab containing the radixtree iter was freed as we traversed the tree, taking the rcu read lock across the loop should prevent that (deferring all the frees until the end). Reported-by: Tomi Sarvela <tomi.p.sarvela@intel.com> Fixes: 96d776345277 ("drm/i915: Use a radixtree for random access to the object's backing storage") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171026130032.10677-1-chris@chris-wilson.co.uk Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com> (cherry picked from commit bea6e987c1ff358224e7bef7084be7650f5d1c38) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2017-10-30drm/i915/edp: read edp display control registers unconditionallyJani Nikula
Per my reading of the eDP spec, DP_DPCD_DISPLAY_CONTROL_CAPABLE bit in DP_EDP_CONFIGURATION_CAP should be set if the eDP display control registers starting at offset DP_EDP_DPCD_REV are "enabled". Currently we check the bit before reading the registers, and DP_EDP_DPCD_REV is the only way to detect eDP revision. Turns out there are (likely buggy) displays that require eDP 1.4+ features, such as supported link rates and link rate select, but do not have the bit set. Read the display control registers unconditionally. They are supposed to read zero anyway if they are not supported, so there should be no harm in this. This fixes the referenced bug by enabling the eDP version check, and thus reading of the supported link rates. The panel in question has 0 in DP_MAX_LINK_RATE which is only supported in eDP 1.4+. Without the supported link rates method we default to RBR which is insufficient for the panel native mode. As a curiosity, the panel also has a bogus value of 0x12 in DP_EDP_DPCD_REV, but that passes our check for >= DP_EDP_14 (which is 0x03). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103400 Reported-and-tested-by: Nicolas P. <issun.artiste@gmail.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171026142932.17737-1-jani.nikula@intel.com (cherry picked from commit 0501a3b0eb01ac2209ef6fce76153e5d6b07034e) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2017-10-30drm/i915: Do not rely on wm preservation for ILK watermarksMaarten Lankhorst
The original intent was to preserve watermarks as much as possible in intel_pipe_wm.raw_wm, and put the validated ones in intel_pipe_wm.wm. It seems this approach is insufficient and we don't always preserve the raw watermarks, so just use the atomic iterator we're already using to get a const pointer to all bound planes on the crtc. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102373 Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: stable@vger.kernel.org #v4.8+ Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171019151341.4579-1-maarten.lankhorst@linux.intel.com (cherry picked from commit 28283f4f359cd7cfa9e65457bb98c507a2cd0cd0) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2017-10-30drm/i915: Cancel the modeset retry work during modeset cleanupManasi Navare
During modeset cleanup on driver unload we may have a pending hotplug work. This needs to be canceled early during the teardown so that it does not fire after we have freed the connector. We do this after drm_kms_helper_poll_fini(dev) since this might trigger modeset retry work due to link retrain and before intel_fbdev_fini() since this work requires the lock from fbdev. If this is not done we may see something like: DEBUG_LOCKS_WARN_ON(mutex_is_locked(lock)) ------------[ cut here ]------------ WARNING: CPU: 4 PID: 5010 at kernel/locking/mutex-debug.c:103 mutex_destroy+0x4e/0x60 Modules linked in: i915(-) snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec snd_hwdep snd_hda_core snd_pcm vgem ax88179_178 +a usbnet mii x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel e1000e ptp pps_core prime_numbers i2c_hid +[last unloaded: snd_hda_intel] CPU: 4 PID: 5010 Comm: drv_module_relo Tainted: G U 4.14.0-rc3-CI-CI_DRM_3186+ #1 Hardware name: Intel Corporation CoffeeLake Client Platform/CoffeeLake S UDIMM RVP, BIOS CNLSFWX1.R00.X104.A03.1709140524 09/14/2017 task: ffff8803c827aa40 task.stack: ffffc90000520000 RIP: 0010:mutex_destroy+0x4e/0x60 RSP: 0018:ffffc90000523d58 EFLAGS: 00010292 RAX: 000000000000002a RBX: ffff88044fbef648 RCX: 0000000000000000 RDX: 0000000080000001 RSI: 0000000000000001 RDI: ffffffff810f0cf0 RBP: ffffc90000523d60 R08: 0000000000000001 R09: 0000000000000001 R10: 000000000f21cb81 R11: 0000000000000000 R12: ffff88044f71efc8 R13: ffffffffa02b3d20 R14: ffffffffa02b3d90 R15: ffff880459b29308 FS: 00007f5df4d6e8c0(0000) GS:ffff88045d300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055ec51f00a18 CR3: 0000000451782006 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: drm_fb_helper_fini+0xd9/0x130 intel_fbdev_destroy+0x12/0x60 [i915] intel_fbdev_fini+0x28/0x30 [i915] intel_modeset_cleanup+0x45/0xa0 [i915] i915_driver_unload+0x92/0x180 [i915] i915_pci_remove+0x19/0x30 [i915] i915_driver_unload+0x92/0x180 [i915] i915_pci_remove+0x19/0x30 [i915] pci_device_remove+0x39/0xb0 device_release_driver_internal+0x15d/0x220 driver_detach+0x40/0x80 bus_remove_driver+0x58/0xd0 driver_unregister+0x2c/0x40 pci_unregister_driver+0x36/0xb0 i915_exit+0x1a/0x8b [i915] SyS_delete_module+0x18c/0x1e0 entry_SYSCALL_64_fastpath+0x1c/0xb1 RIP: 0033:0x7f5df3286287 RSP: 002b:00007fff8e107cc8 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: ffffffff81493a03 RCX: 00007f5df3286287 RDX: 0000000000000001 RSI: 0000000000000800 RDI: 0000564c7be02e48 RBP: ffffc90000523f88 R08: 0000000000000000 R09: 0000000000000080 R10: 00007f5df4d6e8c0 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fff8e107eb0 R14: 0000000000000000 R15: 0000000000000000 Or a GPF like: general protection fault: 0000 [#1] PREEMPT SMP Modules linked in: i915(-) snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec snd_hwdep snd_hda_core snd_pcm vgem ax88179_178 +a usbnet mii x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel e1000e ptp pps_core prime_numbers i2c_hid +[last unloaded: snd_hda_intel] CPU: 0 PID: 82 Comm: kworker/0:1 Tainted: G U W 4.14.0-rc3-CI-CI_DRM_3186+ #1 Hardware name: Intel Corporation CoffeeLake Client Platform/CoffeeLake S UDIMM RVP, BIOS CNLSFWX1.R00.X104.A03.1709140524 09/14/2017 Workqueue: events intel_dp_modeset_retry_work_fn [i915] task: ffff88045a5caa40 task.stack: ffffc90000378000 RIP: 0010:drm_setup_crtcs+0x143/0xbf0 RSP: 0018:ffffc9000037bd20 EFLAGS: 00010202 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000002 RCX: 0000000000000001 RDX: 0000000000000001 RSI: 0000000000000780 RDI: 00000000ffffffff RBP: ffffc9000037bdb8 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000780 R11: 0000000000000000 R12: 0000000000000002 R13: ffff88044fbef4e8 R14: 0000000000000780 R15: 0000000000000438 FS: 0000000000000000(0000) GS:ffff88045d200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055ec51ee5168 CR3: 000000044c89d003 CR4: 00000000003606f0 Call Trace: drm_fb_helper_hotplug_event.part.18+0x7e/0xc0 drm_fb_helper_hotplug_event+0x1a/0x20 intel_fbdev_output_poll_changed+0x1a/0x20 [i915] drm_kms_helper_hotplug_event+0x27/0x30 intel_dp_modeset_retry_work_fn+0x77/0x80 [i915] process_one_work+0x233/0x660 worker_thread+0x206/0x3b0 kthread+0x152/0x190 ? process_one_work+0x660/0x660 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x27/0x40 Code: 06 00 00 45 8b 45 20 31 db 45 31 e4 45 85 c0 0f 8e 91 06 00 00 44 8b 75 94 44 8b 7d 90 49 8b 45 28 49 63 d4 44 89 f6 41 83 c4 01 <48> 8b 04 d0 44 +89 fa 48 8b 38 48 8b 87 a8 01 00 00 ff 50 20 01 RIP: drm_setup_crtcs+0x143/0xbf0 RSP: ffffc9000037bd20 ---[ end trace 08901ff1a77d30c7 ]--- v2: * Rename it to intel_hpd_poll_fini() and call drm_kms_helper_fini() inside it as the first step before cancel work (Chris Wilson) * Add GPF trace in commit message and make the function static (Maarten Lankhorst) Suggested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Fixes: 9301397a63b3 ("drm/i915: Implement Link Rate fallback on Link training failure") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tony Cheng <tony.cheng@amd.com> Cc: Harry Wentland <Harry.wentland@amd.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1509054720-25325-1-git-send-email-manasi.d.navare@intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit 886c6b8692ba5f71b578097524b3b082e2e02119) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2017-10-27Merge tag 'drm-intel-fixes-2017-10-26' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes One fix for stable: - fix perf enable/disable ioctls for 32bits (Lionel) Plus GVT fixes: - Fix per_ctx_bb check (Zhenyu) - Fix GPU hang of Linux guest (Xion) - Refine MMIO_RING_F to check for presence of VCS2 ring (Zhi) * tag 'drm-intel-fixes-2017-10-26' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915/gvt: Adding ACTHD mmio read handler drm/i915/gvt: Extract mmio_read_from_hw() common function drm/i915/gvt: Refine MMIO_RING_F() drm/i915/gvt: properly check per_ctx bb valid state
2017-10-26drm/i915/gvt: Adding ACTHD mmio read handlerXiong Zhang
When a workload is too heavy to finish it in gpu hang check timer intervals(1.5), gpu hang check function will check ACTHD register value to decide whether gpu is real dead or not. On real hw, ACTHD is updated by HW when workload is running, then host kernel won't think it is gpu hang. while guest kernel always read a constant ACTHD value as GVT doesn't supply ACTHD emulate handler, then guest kernel detects a fake gpu hang. To remove such guest fake gpu hang, this patch supply ACTHD mmio read handler which read real HW ACTHD register directly. Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com> Signed-off-by: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/b4c9a097-3e62-124e-6856-b0c37764df7b@intel.com
2017-10-27drm/i915/gvt: Extract mmio_read_from_hw() common functionXiong Zhang
The mmio read handler for ring timestmap / instdone register are same as reading hw value directly. Extract it as common function to reduce code duplications. Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com> Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
2017-10-27drm/i915/gvt: Refine MMIO_RING_F()Zhi Wang
Inspect if the host has VCS2 ring by host i915 macro in MMIO_RING_F(). Also this helps on reducing some LOCs. Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
2017-10-27drm/i915/gvt: properly check per_ctx bb valid stateZhenyu Wang
Need to check valid state for per_ctx bb and bypass batch buffer combine for scan if necessary. Otherwise adding invalid MI batch buffer start cmd for per_ctx bb will cause scan failure, which is taken as -EFAULT now so vGPU would be put in failsafe. This trys to fix that by checking per_ctx bb valid state. Also remove old invalid WARNING that indirect ctx bb shouldn't depend on valid per_ctx bb. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
2017-10-26Merge tag 'drm-intel-fixes-2017-10-25' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm-intel-fixes-2017-10-25: only 1 fix for stable: - fix perf enable/disable ioctls for 32bits (lionel) * tag 'drm-intel-fixes-2017-10-25' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915/perf: fix perf enable/disable ioctls with 32bits userspace
2017-10-25drm/i915/perf: fix perf enable/disable ioctls with 32bits userspaceLionel Landwerlin
The compat callback was missing and triggered failures in 32bits userspace when enabling/disable the perf stream. We don't require any particular processing here as these ioctls don't take any argument. Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Fixes: eec688e1420 ("drm/i915: Add i915 perf infrastructure") Cc: linux-stable <stable@vger.kernel.org> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171024152728.4873-1-lionel.g.landwerlin@intel.com (cherry picked from commit 191f896085cf3b5d85920d58a759da4eea141721) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2017-10-25drm/amd/amdgpu: Remove workaround check for UVD6 on APUsTom St Denis
On APUs the uvd6 driver was skipping proper suspend/resume routines resulting in a broken state upon resume. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-10-25locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns ↵Mark Rutland
to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-21drm/amd/powerplay: fix uninitialized variableRex Zhu
refresh_rate was not initialized when program display gap. this patch can fix vce ring test failed when do S3 on Polaris10. bug: https://bugs.freedesktop.org/show_bug.cgi?id=103102 bug: https://bugzilla.kernel.org/show_bug.cgi?id=196615 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2017-10-19Merge tag 'drm-intel-fixes-2017-10-18-1' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes Fix for stable: - Fix DDI translation tables for BDW (Chris). Critical fix: - Fix GPU Hang on GVT (Changbin). Other fixes: - Fix eviction when GGTT is idle (Chris). - CNL PLL fixes (Rodrigo). - Fix pwrite into shmemfs (Chris). - Mask bits for BXT and CHV L3 Workaround WaProgramL3SqcReg1Default (Oscar). * tag 'drm-intel-fixes-2017-10-18-1' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915: Use a mask when applying WaProgramL3SqcReg1Default drm/i915: Report -EFAULT before pwrite fast path into shmemfs drm/i915/cnl: Fix PLL initialization for HDMI. drm/i915/cnl: Fix PLL mapping. drm/i915: Use bdw_ddi_translations_fdi for Broadwell drm/i915: Fix eviction when the GGTT is idle but full drm/i915/gvt: Fix GPU hang after reusing vGPU instance across different guest OS
2017-10-19Merge branch 'drm-fixes-4.14' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes Single amdgpu regression fix. * 'drm-fixes-4.14' of git://people.freedesktop.org/~agd5f/linux: Revert "drm/amdgpu: discard commands of killed processes"
2017-10-19Merge branch 'linux-4.14' of git://github.com/skeggsb/linux into drm-fixesDave Airlie
some nouveau fixes. * 'linux-4.14' of git://github.com/skeggsb/linux: drm/nouveau/fbcon: fix oops without fbdev emulation drm/nouveau/kms/nv50: fix oops during DP IRQ handling on non-MST boards drm/nouveau/bsp/g92: disable by default drm/nouveau/mmu: flush tlbs before deleting page tables
2017-10-19drm/nouveau/fbcon: fix oops without fbdev emulationPavel Roskin
This is similar to an earlier commit 52dfcc5ccfbb ("drm/nouveau: fix for disabled fbdev emulation"), but protects all occurrences of helper.fbdev in the source. I see oops in nouveau_fbcon_accel_save_disable() called from nouveau_fbcon_set_suspend_work() on Linux 3.13 when CONFIG_DRM_FBDEV_EMULATION option is disabled. Signed-off-by: Pavel Roskin <plroskin@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-10-18Revert "drm/amdgpu: discard commands of killed processes"Alex Deucher
This causes instability in piglit. It's fixed in drm-next with: 515c6faf85970af529953ec137b4b6fcb3272e25 1650c14b459ff9c85767746f1ef795a780653128 214a91e6bfabaa6cbfa692df8732000aab050795 29d253553559dba919315be847f4f2cce29edd42 79867462634836ee5c39a2cdf624719feeb189bd This reverts commit 6af0883ed9770cf9b0a4f224c91481484cd1b025. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-10-18drm/i915: Use a mask when applying WaProgramL3SqcReg1DefaultOscar Mateo
Otherwise we are blasting other bits in GEN8_L3SQCREG1 that might be important (although we probably aren't at the moment because 0 seems to be the default for all the other bits). v2: Extra parentheses (Michel) Fixes: 050fc46 ("drm/i915:bxt: implement WaProgramL3SqcReg1DefaultForPerf") Fixes: 450174f ("drm/i915/chv: Tune L3 SQC credits based on actual latencies") Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1508271945-14961-1-git-send-email-oscar.mateo@intel.com Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit 930a784d02339be437fec07b3bb7213bde0ed53b) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2017-10-18drm/i915: Report -EFAULT before pwrite fast path into shmemfsChris Wilson
When pwriting into shmemfs, the fast path pagecache_write does not notice when it is writing to beyond the end of the truncated shmemfs inode. Report -EFAULT directly when we try to use pwrite into the !I915_MADV_WILLNEED object. Fixes: 7c55e2c5772d ("drm/i915: Use pagecache write to prepopulate shmemfs from pwrite-ioctl") Testcase: igt/gem_madvise/dontneed-before-pwrite Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.william.auld@gmail.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171016202732.25459-1-chris@chris-wilson.co.uk (cherry picked from commit a6d65e451cc4e7127698384868a4447ee7be7d16) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2017-10-16drm/i915/cnl: Fix PLL initialization for HDMI.Rodrigo Vivi
HDMI Mode selection on CNL is on CFGCR0 for that PLL, not on in a global CTRL1 as it was on SKL. The original patch addressed this difference, but leaving behind this single entry here. So we were checking the wrong bits during the PLL initialization and consequently avoiding the CFGCR1 setup during HDMI initialization. Luckly when only HDMI was in use BIOS had already setup this for us. But the dual display with hot plug were messed up. Fixes: a927c927de34 ("drm/i915/cnl: Initialize PLLs") Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Kahola, Mika <mika.kahola@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: James Ausmus <james.ausmus@intel.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171003220859.21352-3-rodrigo.vivi@intel.com (cherry picked from commit 614ee07acfbb55f2debfc3223ffae97fee17ed14) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2017-10-16drm/i915/cnl: Fix PLL mapping.Rodrigo Vivi
On PLL Enable sequence we need to "Configure DPCLKA_CFGCR0 to turn on the clock for the DDI and map the DPLL to the DDI" So we first do the map and then we unset DDI_CLK_OFF to turn the clock on. We do this in 2 separated steps. However, on this second step where we should only unset the off bit we are also unmapping the ddi from the pll. So we end up using the pll 0 for almost everything. Consequently breaking cases with more than one display. Fixes: 555e38d27317 ("drm/i915/cnl: DDI - PLL mapping") Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Kahola, Mika <mika.kahola@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: James Ausmus <james.ausmus@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171003220859.21352-2-rodrigo.vivi@intel.com (cherry picked from commit 87145d95c3d8297fb74762bd92e022d7f5cc250c) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2017-10-16drm/i915: Use bdw_ddi_translations_fdi for BroadwellChris Wilson
The compiler warns: drivers/gpu/drm/i915/intel_ddi.c:118:35: warning: ‘bdw_ddi_translations_fdi’ defined but not used Lo and behold, if we look at intel_ddi_get_buf_trans_fdi(), it uses hsw_ddi_translations_fdi[] for both Haswell and *Broadwell* Fixes: 7d1c42e679f9 ("drm/i915: Refactor code to select the DDI buf translation table") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: David Weinehall <david.weinehall@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: <stable@vger.kernel.org> # v4.12+ Link: https://patchwork.freedesktop.org/patch/msgid/20171013154735.27163-1-chris@chris-wilson.co.uk Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (cherry picked from commit 1210d3889077653b90b0bfd2cc54e19f4766e4e6) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2017-10-16drm/i915: Fix eviction when the GGTT is idle but fullChris Wilson
In the full-ppgtt world, we can fill the GGTT full of context objects. These context objects are currently implicitly tracked by the requests that pin them i.e. they are only unpinned when the request is completed and retired, but we do not have the link from the vma to the request (anymore). In order to unpin those contexts, we have to issue another request and wait upon the switch to the kernel context. The bug during eviction was that we assumed that a full GGTT meant we would have requests on the GGTT timeline, and so we missed situations where those requests where merely in flight (and when even they have not yet been submitted to hw yet). The fix employed here is to change the already-is-idle test to no look at the execution timeline, but count the outstanding requests and then check that we have switched to the kernel context. Erring on the side of overkill here just means that we stall a little longer than may be strictly required, but we only expect to hit this path in extreme corner cases where returning an erroneous error is worse than the delay. v2: Logical inversion when swapping over branches. Fixes: 80b204bce8f2 ("drm/i915: Enable multiple timelines") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171012125726.14736-1-chris@chris-wilson.co.uk (cherry picked from commit 55b4f1ce2f23692c57205b9974fba61baa4b9321) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2017-10-16Merge tag 'gvt-fixes-2017-10-16' of https://github.com/01org/gvt-linux into ↵Rodrigo Vivi
drm-intel-fixes Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/d87b1644-58cc-f7a8-57f5-126fe2b1eecd@intel.com
2017-10-17drm/i915/gvt: Fix GPU hang after reusing vGPU instance across different guest OSChangbin Du
We have implemented delayed ring mmio switch mechanism to reduce unnecessary mmio switch. While the vGPU is being destroyed or detached from VM, we need to force the ring switch to host context. The later deadline is missed. Then it got a chance that word load from VM2 might execute under the ring context of VM1 which was attached to a same vGPU instance. Finally, the GPU is hang. This patch guarantee the two deadline are performed. v2: Remove unused variable 'scheduler' Signed-off-by: Changbin Du <changbin.du@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-10-16drm/exynos: Clear drvdata after component unbindMarek Szyprowski
When components are unbound, DRM driver is unregistered and freed, so clear drvdata to avoid potential use-after-free issue in suspend/resume paths. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
generated by cgit (git 2.34.1) at 2024-05-30 20:33:36 +0000