summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2025-06-23drm/xe/pcode: add struct drm_device based interfaceJani Nikula
In preparation for dropping the dependency on struct intel_uncore or struct xe_tile from display code, add a struct drm_device based interface to pcode. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://lore.kernel.org/r/eeaa9cc8438caab2e22f9cb2142fbc18cc0fd861.1750678991.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-06-23drm/i915/pcode: add struct drm_device based interfaceJani Nikula
In preparation for dropping the dependency on struct intel_uncore from display code, add a struct drm_device based interface to pcode. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://lore.kernel.org/r/e4ee176ca5454cfc636cbe71feb9f55d9e91f4ea.1750678991.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-06-23drm/i915/pcode: drop fast wait from snb_pcode_write_timeout()Jani Nikula
Only use the ms granularity wait in snb_pcode_write_timeout(), primarily to better align with the xe driver, which also only has the millisecond wait. Use an arbitrary 250 us fast wait before the specified ms wait, and have snb_pcode_write() default to 1 ms. This means snb_pcode_write() and snb_pcode_write_timeout() will always be sleeping functions. There should not be any atomic users for pcode writes though, and any display code using pcode via xe has already been non-atomic. The uncore wait will do a might_sleep() annotation that should catch any problems. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://lore.kernel.org/r/ba86280f53cea2d020308db35f1ecbd615d07d8a.1750678991.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-06-23drm/connector: move HDR sink metadata to display infoJani Nikula
Information parsed from the display EDID should be stored in display info. Move HDR sink metadata there. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250519112900.1383997-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-06-23gpu: nova-core: vbios: Add support to look up PMU table in FWSECJoel Fernandes
The PMU table in the FWSEC image has to be located to locate the start of the Falcon ucode in the same or another FWSEC image. Add support for the same. Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com> Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Link: https://lore.kernel.org/r/20250619-nova-frts-v6-18-ecf41ef99252@nvidia.com [ Re-format and use markdown in comments. - Danilo ] Signed-off-by: Danilo Krummrich <dakr@kernel.org>
2025-06-23gpu: nova-core: vbios: Add base support for VBIOS construction and iterationJoel Fernandes
Add support for navigating the VBIOS images required for extracting ucode data for GSP to boot. Later patches will build on this. Debug log messages will show the BIOS images: [102141.013287] NovaCore: Found BIOS image at offset 0x0, size: 0xfe00, type: PciAt [102141.080692] NovaCore: Found BIOS image at offset 0xfe00, size: 0x14800, type: Efi [102141.098443] NovaCore: Found BIOS image at offset 0x24600, size: 0x5600, type: FwSec [102141.415095] NovaCore: Found BIOS image at offset 0x29c00, size: 0x60800, type: FwSec Cc: Alexandre Courbot <acourbot@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Shirish Baskaran <sbaskaran@nvidia.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Timur Tabi <ttabi@nvidia.com> Cc: Ben Skeggs <bskeggs@nvidia.com> [ acourbot@nvidia.com: fix clippy warnings, read_more() function ] Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com> Link: https://lore.kernel.org/r/20250619-nova-frts-v6-17-ecf41ef99252@nvidia.com [ Replace extend_with() and copy_from_slice() with extend_from_slice(); re-format and use markdown in comments. - Danilo ] Signed-off-by: Danilo Krummrich <dakr@kernel.org>
2025-06-23gpu: nova-core: firmware: add ucode descriptor used by FWSEC-FRTSAlexandre Courbot
FWSEC-FRTS is the first firmware we need to run on the GSP falcon in order to initiate the GSP boot process. Introduce the structure that describes it. Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Link: https://lore.kernel.org/r/20250619-nova-frts-v6-16-ecf41ef99252@nvidia.com Signed-off-by: Danilo Krummrich <dakr@kernel.org>
2025-06-23gpu: nova-core: add falcon register definitions and base codeAlexandre Courbot
Booting the GSP on Ampere requires an intricate dance between the GSP and SEC2 falcons, where the GSP starts by running the FWSEC firmware to create the WPR2 region , and then SEC2 loads the actual RISC-V firmware into the GSP. Add the common Falcon code and HAL for Ampere GPUs, and instantiate the GSP and SEC2 Falcons that will be required to perform that dance and boot the GSP. Thanks to Ben Skeggs for pointing out an important bug in the memory scrubbing code that could lead to a race condition and ultimately a failure to boot the GSP! Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Link: https://lore.kernel.org/r/20250619-nova-frts-v6-15-ecf41ef99252@nvidia.com Signed-off-by: Danilo Krummrich <dakr@kernel.org>
2025-06-23gpu: nova-core: register sysmem flush pageAlexandre Courbot
Reserve a page of system memory so sysmembar can perform a read on it if a system write occurred since the last flush. Do this early as it can be required to e.g. reset the GPU falcons. Chipsets capabilities differ in that respect, so this commit also introduces the FB HAL. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Link: https://lore.kernel.org/r/20250619-nova-frts-v6-14-ecf41ef99252@nvidia.com [ * Use kernel::page::PAGE_SIZE instead of kernel::bindings::PAGE_SIZE. * Get rid of the Option for SysmemFlush. * Slightly reword SysmemFlush doc-comments. - Danilo ] Signed-off-by: Danilo Krummrich <dakr@kernel.org>
2025-06-23gpu: nova-core: add DMA object structAlexandre Courbot
Since we will need to allocate lots of distinct memory chunks to be shared between GPU and CPU, introduce a type dedicated to that. It is a light wrapper around CoherentAllocation. Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Link: https://lore.kernel.org/r/20250619-nova-frts-v6-13-ecf41ef99252@nvidia.com Signed-off-by: Danilo Krummrich <dakr@kernel.org>
2025-06-23gpu: nova-core: wait for GFW_BOOT completionAlexandre Courbot
Upon reset, the GPU executes the GFW (GPU Firmware) in order to initialize its base parameters such as clocks. The driver must ensure that this step is completed before using the hardware. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Link: https://lore.kernel.org/r/20250619-nova-frts-v6-12-ecf41ef99252@nvidia.com [ Slightly adjust comments in wait_gfw_boot_completion(). - Danilo ] Signed-off-by: Danilo Krummrich <dakr@kernel.org>
2025-06-23drm/xe/nvm: add support for non-posted eraseReuven Abliyev
Erase command is slow on discrete graphics storage and may overshot PCI completion timeout. BMG introduces the ability to have non-posted erase. Add driver support for non-posted erase with polling for erase completion. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Reuven Abliyev <reuven.abliyev@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Link: https://lore.kernel.org/r/20250617145159.3803852-9-alexander.usyskin@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-06-23drm/xe/nvm: add support for access modeAlexander Usyskin
Check NVM access mode from GSC FW status registers and overwrite access status read from SPI descriptor, if needed. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Link: https://lore.kernel.org/r/20250617145159.3803852-8-alexander.usyskin@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-06-23drm/xe/nvm: add on-die non-volatile memory deviceAlexander Usyskin
Enable access to internal non-volatile memory on DGFX with GSC/CSC devices via a child device. The nvm child device is exposed via auxiliary bus. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Link: https://lore.kernel.org/r/20250617145159.3803852-7-alexander.usyskin@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-06-23Merge drm/drm-next into drm-xe-nextRodrigo Vivi
Catch up on i915 changes to be able to include mtd driver for both xe and i915. Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-06-23gpu: nova-core: add helper function to wait on conditionAlexandre Courbot
While programming the hardware, we frequently need to busy-wait until a condition (like a given bit of a register to switch value) happens. Add a basic `wait_on` helper function to wait on such conditions expressed as a closure, with a timeout argument. This is temporary as we will switch to `read_poll_timeout` [1] once it is available. Link: https://lore.kernel.org/lkml/20250220070611.214262-8-fujita.tomonori@gmail.com/ [1] Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Link: https://lore.kernel.org/r/20250619-nova-frts-v6-11-ecf41ef99252@nvidia.com Signed-off-by: Danilo Krummrich <dakr@kernel.org>
2025-06-23gpu: nova-core: increase BAR0 size to 16MBAlexandre Courbot
The Turing+ register address space spans over that range, so increase it as future patches will access more registers. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Link: https://lore.kernel.org/r/20250619-nova-frts-v6-10-ecf41ef99252@nvidia.com Signed-off-by: Danilo Krummrich <dakr@kernel.org>
2025-06-23gpu: nova-core: allow register aliasesAlexandre Courbot
Some registers (notably scratch registers) don't have a definitive purpose, but need to be interpreted differently depending on context. Expand the register!() macro to support a syntax indicating that a register type should be at the same offset as another one, but under a different name, and with different fields and documentation. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Link: https://lore.kernel.org/r/20250619-nova-frts-v6-9-ecf41ef99252@nvidia.com Signed-off-by: Danilo Krummrich <dakr@kernel.org>
2025-06-23gpu: nova-core: expose the offset of each register as a type constantAlexandre Courbot
Although we want to access registers using the provided methods, it is sometimes needed to use their raw offset, for instance when working with a register array. Expose the offset of each register using a type constant to avoid resorting to hardcoded values. Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Link: https://lore.kernel.org/r/20250619-nova-frts-v6-8-ecf41ef99252@nvidia.com Signed-off-by: Danilo Krummrich <dakr@kernel.org>
2025-06-23gpu: nova-core: add delimiter for helper rules in register!() macroAlexandre Courbot
This macro is pretty complex, and most rules are just helper, so add a delimiter to indicate when users only interested in using it can stop reading. Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Link: https://lore.kernel.org/r/20250619-nova-frts-v6-7-ecf41ef99252@nvidia.com Signed-off-by: Danilo Krummrich <dakr@kernel.org>
2025-06-23gpu: nova-core: use absolute paths in register!() macroAlexandre Courbot
Fix the paths that were not absolute to prevent a potential local module from being picked up. Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Link: https://lore.kernel.org/r/20250619-nova-frts-v6-6-ecf41ef99252@nvidia.com Signed-off-by: Danilo Krummrich <dakr@kernel.org>
2025-06-23drm/i915/dmc: Do not enable the pipe DMC on TGL when PSR is possibleVille Syrjälä
On TGL/derivatives the pipe DMC state is lost when PG1 is disabled, and the main DMC does not restore any of it. This means the state will also be lost during PSR+DC5/6. It seems safest to not even enable the pipe DMC in that case (the main DMC does restore the pipe DMC enable bit in PIPEDMC_CONTROL_A for some reason). Since pipe DMC is only needed for "fast LACE" on these platforms we aren't actually losing anything here. In the future if we do want to enable "fast LACE" we'll just have to remember that it won't be compatible with PSR. Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250617170759.19552-10-ville.syrjala@linux.intel.com
2025-06-23drm/i915/dmc: Pass crtc_state to intel_dmc_{enable,disable}_pipe()Ville Syrjälä
I'll need to examine the crtc state during intel_dmc_enable_pipe(). To that end pass the whole crtc into intel_dmc_{enable,disable}_pipe(). Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250617170759.19552-9-ville.syrjala@linux.intel.com
2025-06-23drm/i915/dmc: Assert DMC is loaded harderVille Syrjälä
Currently we have some asserts to make sure the main DMC has been loaded. Add similar asserts for the pipe DMCs. And we might as well just check all the mmio registers the firmware has asked us to initialize. That also covers the hardcoded SSP/HTP registers we were checking for the main DMC. TODO: Maybe always configure DMC_EVT_CTL_ENABLE the way the firmware has it set so that we wouldn't need to special case in the assert? v2: Also assert in intel_dmc_load_program() Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250617170759.19552-8-ville.syrjala@linux.intel.com
2025-06-23drm/i915/dmc: Reload pipe DMC MMIO registers for pipe C/D on various platformsVille Syrjälä
On ADL/MTL pipe DMC MMIO state evidently lives in PG0. The main DMC saves/restores it for pipes A/B, but for pipes C/D we have to do it in the driver. On PTL the situation is mostly the same, except the main DMC firmware doesn't seem to have the PG0 save/restore code anymore, and instead the hardware (or maybe Punit?) seems to take care of this job now. Pipes C/D still need a manual restore by the driver. On LNL I've been unable to lose any pipe DMC state, despite the main DMC firmware still implementing the PG0 save/restore for pipes A/B. Not sure what's going on here. On DG2 I've also not been able to lose the pipe DMC state. DG2 doesn't support DC6, so that might explain part of it. But even DC9 doesn't make a difference here. Perhaps PG0 is just always on for DG2? BMG I've not tested at all. The main DMC firmware does appaer to implement the PG0 pipe A/B save/restore logic. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250617170759.19552-7-ville.syrjala@linux.intel.com Reviewed-by: Uma Shankar <uma.shankar@intel.com>
2025-06-23drm/i915/dmc: Reload pipe DMC state on TGL when enabling pipe AVille Syrjälä
On TGL/derivatives the entire pipe DMC state (program + MMIO) is lost when PG1 is disabled, and the main DMC does not restore any of it. Reload the state when enabling a pipe. The other option would be to not load the pipe DMC at all since it's only needed for "fast LACE" (which we don't use) on these platforms. But let's keep it around just in case we ever decide that "fast LACE" is something we want. Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250617170759.19552-6-ville.syrjala@linux.intel.com
2025-06-23drm/i915/dmc: Extract dmc_load_program()Ville Syrjälä
We'll be needing to reload the program for individual DMCs. To make that possible pull the code to load the program for a single DMC into a new function. This does change the order of things during init/resume a bit; previously we loaded the program RAM for all DMCs first, and then loaded the MMIO registers for all DMCs. Now those operations will be interleaved between different DMCs. Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250617170759.19552-5-ville.syrjala@linux.intel.com
2025-06-23drm/i915/dmc: Shuffle code aroundVille Syrjälä
Shuffle the DMC_EVT_CTL related stuff around once more. We'll need this stuff during intel_dmc_enable_pipe(), and this lets us avoid forward declarations. Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250617170759.19552-4-ville.syrjala@linux.intel.com
2025-06-23drm/i915/dmc: Parametrize MTL_PIPEDMC_GATING_DISVille Syrjälä
The MTL+ pipe DMC clock gating bits can be parametrized. Make it so. Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250617170759.19552-3-ville.syrjala@linux.intel.com
2025-06-23drm/i915/dmc: Limit pipe DMC clock gating w/a to just ADL/DG2/MTLVille Syrjälä
Supposedly nothing post-MTL (even BMG) needs the pipe DMC clock gating w/a (Wa_16015201720), so don't apply it. TODO: check if the ADL/DG2 "clock gating needed during DMC loading" part is actually needed, not seeing anything in the docs about it... Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250617170759.19552-2-ville.syrjala@linux.intel.com
2025-06-23drm/dp: Change AUX DPCD probe address from DPCD_REV to LANE0_1_STATUSImre Deak
Reading DPCD registers has side-effects in general. In particular accessing registers outside of the link training register range (0x102-0x106, 0x202-0x207, 0x200c-0x200f, 0x2216) is explicitly forbidden by the DP v2.1 Standard, see 3.6.5.1 DPTX AUX Transaction Handling Mandates 3.6.7.4 128b/132b DP Link Layer LTTPR Link Training Mandates Based on my tests, accessing the DPCD_REV register during the link training of an UHBR TBT DP tunnel sink leads to link training failures. Solve the above by using the DP_LANE0_1_STATUS (0x202) register for the DPCD register access quirk. Cc: <stable@vger.kernel.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://lore.kernel.org/r/20250605082850.65136-2-imre.deak@intel.com (cherry picked from commit a40c5d727b8111b5db424a1e43e14a1dcce1e77f) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2025-06-23drm/i915/snps_hdmi_pll: Fix 64-bit divisor truncation by using div64_u64Ankit Nautiyal
DIV_ROUND_CLOSEST_ULL uses do_div(), which expects a 32-bit divisor. When passing a 64-bit constant like CURVE2_MULTIPLIER, the value is silently truncated to u32, potentially leading to incorrect results on large divisors. Replace DIV_ROUND_CLOSEST_ULL with DIV64_U64_ROUND_CLOSEST which correctly handles full 64-bit division. v2: Use DIV64_U64_ROUND_CLOSEST instead of div64_u64 macro. (Jani) Fixes: 5947642004bf ("drm/i915/display: Add support for SNPS PHY HDMI PLL algorithm for DG2") Reported-by: Vas Novikov <vasya.novikov@gmail.com> Closes: https://lore.kernel.org/all/8d7c7958-9558-4c8a-a81a-e9310f2d8852@gmail.com/ Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Suraj Kandpal <suraj.kandpal@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Vas Novikov <vasya.novikov@gmail.com> Cc: stable@vger.kernel.org # v6.15+ Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Link: https://lore.kernel.org/r/20250618130951.1596587-2-ankit.k.nautiyal@intel.com (cherry picked from commit b300a175a11e6a934d728317dc39787723cc7917) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2025-06-23drm/ci: Add jobs to run KUnit testsVignesh Raman
Add jobs to run KUnit tests using tools/testing/kunit/kunit.py tool. Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com> Acked-by: Helen Koike <helen.fornazier@gmail.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20250623085033.39680-3-vignesh.raman@collabora.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-06-23drm/ci: Add jobs to validate devicetreesVignesh Raman
Add jobs to run dt_binding_check and dtbs_check. If warnings are seen, exit with a non-zero error code while configuring them as warning in the GitLab CI pipeline. Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com> Acked-by: Helen Koike <helen.fornazier@gmail.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250623085033.39680-2-vignesh.raman@collabora.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-06-23drm/bochs: Add support for drm_panicRyosuke Yasuoka
Add drm_panic module for bochs drm so that panic screen can be displayed on panic. Signed-off-by: Ryosuke Yasuoka <ryasuoka@redhat.com> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://lore.kernel.org/r/20250613132023.106946-1-ryasuoka@redhat.com Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
2025-06-23drm/i915/panel: make panel funcs staticJani Nikula
The drm panel funcs should be static, fix it. Fixes: 3fdd5bfbd638 ("drm/i915/panel: register drm_panel and call prepare/unprepare for ICL+ DSI") Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://lore.kernel.org/r/20250612124617.626958-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-06-23drm: writeback: Fix drm_writeback_connector_cleanup signatureLouis Chauvet
The drm_writeback_connector_cleanup have the signature: static void drm_writeback_connector_cleanup( struct drm_device *dev, struct drm_writeback_connector *wb_connector) But it is stored and used as a drmres_release_t typedef void (*drmres_release_t)(struct drm_device *dev, void *res); While the current code is valid and does not produce any warning, the CFI runtime check (CONFIG_CFI_CLANG) can fail because the function signature is not the same as drmres_release_t. In order to fix this, change the function signature to match what is expected by drmres_release_t. Fixes: 1914ba2b91ea ("drm: writeback: Create drmm variants for drm_writeback_connector initialization") Suggested-by: Mark Yacoub <markyacoub@google.com> Reviewed-by: Maíra Canal <mcanal@igalia.com> Link: https://lore.kernel.org/r/20250429-drm-fix-writeback-cleanup-v2-1-548ff3a4e284@bootlin.com Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
2025-06-23Merge drm/drm-next into drm-intel-nextJani Nikula
Sync with drm_panel changes from drm-misc-next, and xe driver changes from drm-xe-next. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-06-23drm/xe/display: read PCON capability only when presentChaitanya Kumar Borah
Avoid reading the PCON capabilities redundantly on non-branch devices. v2: - Make commit description more accurate. (Imre) - Clear intel_dp->pcon_dsc_dpcd irrespective of presense of PCON. (Imre) Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://lore.kernel.org/r/20250619042629.3980244-1-chaitanya.kumar.borah@intel.com
2025-06-23Merge 6.16-rc3 into driver-core-nextGreg Kroah-Hartman
We need the driver-core fixes that are in 6.16-rc3 into here as well to build on top of. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-23Merge tag 'drm-intel-next-2025-06-18' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next drm/i915 feature pull for v6.17: Features and functionality: - Add support for DSC fractional link bpp on DP MST (Imre) - Add support for simultaneous Panel Replay and Adaptive Sync (Jouni) - Add support for PTL+ double buffered LUT registers (Chaitanya, Ville) - Add PIPEDMC event handling in preparation for flip queue (Ville) Refactoring and cleanups: - Rename lots of DPLL interfaces to unify them (Suraj) - Allocate struct intel_display dynamically (Jani) - Abstract VLV IOSF sideband better (Jani) - Use str_true_false() helper (Yumeng Fang) - Refactor DSB code in preparation for flip queue (Ville) - Use drm_modeset_lock_assert_held() instead of open coding (Luca) - Remove unused arg from skl_scaler_get_filter_select() (Luca) - Split out a separate display register header (Jani) - Abstract DRAM detection better (Jani) - Convert LPT/WPT SBI sideband to struct intel_display (Jani) Fixes: - Fix DSI HS command dispatch with forced pipeline flush (Gareth Yu) - Fix BMG and LNL+ DP adaptive sync SDP programming (Ankit) - Fix error path for xe display workqueue allocation (Haoxiang Li) - Disable DP AUX access probe where not required (Imre) - Fix DKL PHY access if the port is invalid (Luca) - Fix PSR2_SU_STATUS access on ADL+ (Jouni) - Add sanity checks for porch and sync on BXT/GLK DSI (Ville) DRM core changes: - Change AUX DPCD access probe address (Imre) - Refactor EDID quirks, amd make them available to drivers (Imre) - Add quirk for DPCD access probe (Imre) - Add DPCD definitions for Panel Replay capabilities (Jouni) Merges: - Backmerges to sync with v6.15-rcs and v6.16-rc1 (Jani) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://lore.kernel.org/r/fff9f231850ed410bd81b53de43eff0b98240d31@intel.com
2025-06-22rust: enable `clippy::cast_lossless` lintTamir Duberstein
Before Rust 1.29.0, Clippy introduced the `cast_lossless` lint [1]: > Rust’s `as` keyword will perform many kinds of conversions, including > silently lossy conversions. Conversion functions such as `i32::from` > will only perform lossless conversions. Using the conversion functions > prevents conversions from becoming silently lossy if the input types > ever change, and makes it clear for people reading the code that the > conversion is lossless. While this doesn't eliminate unchecked `as` conversions, it makes such conversions easier to scrutinize. It also has the slight benefit of removing a degree of freedom on which to bikeshed. Thus apply the changes and enable the lint -- no functional change intended. Link: https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless [1] Suggested-by: Benno Lossin <benno.lossin@proton.me> Link: https://lore.kernel.org/all/D8ORTXSUTKGL.1KOJAGBM8F8TN@proton.me/ Reviewed-by: Benno Lossin <benno.lossin@proton.me> Reviewed-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Tamir Duberstein <tamird@gmail.com> Acked-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Acked-by: Jocelyn Falempe <jfalempe@redhat.com> Acked-by: Danilo Krummrich <dakr@kernel.org> Link: https://lore.kernel.org/r/20250615-ptr-as-ptr-v12-5-f43b024581e8@gmail.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2025-06-22rust: enable `clippy::as_underscore` lintTamir Duberstein
In Rust 1.63.0, Clippy introduced the `as_underscore` lint [1]: > The conversion might include lossy conversion or a dangerous cast that > might go undetected due to the type being inferred. > > The lint is allowed by default as using `_` is less wordy than always > specifying the type. Always specifying the type is especially helpful in function call contexts where the inferred type may change at a distance. Specifying the type also allows Clippy to spot more cases of `useless_conversion`. The primary downside is the need to specify the type in trivial getters. There are 4 such functions: 3 have become slightly less ergonomic, 1 was revealed to be a `useless_conversion`. While this doesn't eliminate unchecked `as` conversions, it makes such conversions easier to scrutinize. It also has the slight benefit of removing a degree of freedom on which to bikeshed. Thus apply the changes and enable the lint -- no functional change intended. Link: https://rust-lang.github.io/rust-clippy/master/index.html#as_underscore [1] Reviewed-by: Benno Lossin <benno.lossin@proton.me> Reviewed-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Tamir Duberstein <tamird@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Danilo Krummrich <dakr@kernel.org> Link: https://lore.kernel.org/r/20250615-ptr-as-ptr-v12-4-f43b024581e8@gmail.com [ Changed `isize` to `c_long`. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2025-06-20drm/xe/ptl: Apply Wa_16026007364sanirban
As part of this WA GuC will save and restore value of two XE3_Media control registers that were not included in the HW power context. v2: - Update klv name (Badal) Signed-off-by: sanirban <sk.anirban@intel.com> Reviewed-by: Badal Nilawar <badal.nilawar@intel.com> Link: https://lore.kernel.org/r/20250619133413.107423-2-sk.anirban@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-06-20drm/panfrost: Add support for Mali on the MT8370 SoCLouis-Alexis Eyraud
Add a compatible for the MediaTek MT8370 SoC, with an integrated ARM Mali G57 MC2 GPU (Valhall-JM, dual core), with new platform data for its support in the panfrost driver. It uses the same data as MT8186 for the power management features to describe power supplies, pm_domains and enablement (one regulator, two power domains) but also sets the FORCE_AARCH64_PGTABLE flag in the GPU configuration quirks bitfield to enable AARCH64 4K page table format mode. As MT8186 and MT8370 SoC have different GPU architecture (Mali G52 2EE MC2 for MT8186), making them not compatible, and this mode is only enabled for Mediatek SoC that are Mali G57 based (compatible with mediatek,mali-mt8188 or mediatek,mali-8192), having specific platform data allows to set this flag for MT8370 without modifying MT8186 configuration and behaviour. Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://lore.kernel.org/r/20250509-mt8370-enable-gpu-v6-4-2833888cb1d3@collabora.com
2025-06-20drm/panfrost: Commonize Mediatek power domain array definitionsLouis-Alexis Eyraud
In the panfrost driver, the platform data of several Mediatek SoC declares and uses several different power domains arrays according to GPU core number present in the SoC: - mediatek_mt8186_pm_domains (2 cores) - mediatek_mt8183_pm_domains (3 cores) - mediatek_mt8192_pm_domains (5 cores) As they all are fixed arrays, starting with the same entries and the platform data also has a power domains array length field (num_pm_domains), they can be replaced by a single array, containing all entries, if the num_pm_domains field of the platform data is also set to the matching core number. So, create a generic power domain array (mediatek_pm_domains) and use it in the mt8183(b), mt8186, mt8188 and mt8192 platform data instead. Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://lore.kernel.org/r/20250509-mt8370-enable-gpu-v6-3-2833888cb1d3@collabora.com
2025-06-20drm/panfrost: Drop duplicated Mediatek supplies arraysLouis-Alexis Eyraud
In the panfrost driver, the platform data of several Mediatek SoC declares and uses custom supplies array definitions (mediatek_mt8192_supplies, mediatek_mt8183_b_supplies), that are the same as default_supplies (used by default platform data). So drop these duplicated definitions and use default_supplies instead. Also, rename mediatek_mt8183_supplies to a more generic name too (legacy_supplies). Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://lore.kernel.org/r/20250509-mt8370-enable-gpu-v6-2-2833888cb1d3@collabora.com
2025-06-20Merge tag 'drm-misc-next-2025-06-19' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for 6.17: UAPI Changes: - Add Task Information for the wedge API Cross-subsystem Changes: Core Changes: - Fix warnings related to export.h - fbdev: Make CONFIG_FIRMWARE_EDID available on all architectures - fence: Fix UAF issues - format-helper: Improve tests Driver Changes: - ivpu: Add turbo flag, Add Wildcat Lake Support - rz-du: Improve MIPI-DSI Support - vmwgfx: fence improvement Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <mripard@redhat.com> Link: https://lore.kernel.org/r/20250619-perfect-industrious-whippet-8ed3db@houat
2025-06-19ref_tracker: eliminate the ref_tracker_dir name fieldJeff Layton
Now that we have dentries and the ability to create meaningful symlinks to them, don't keep a name string in each tracker. Switch the output format to print "class@address", and drop the name field. Also, add a kerneldoc header for ref_tracker_dir_init(). Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://patch.msgid.link/20250618-reftrack-dbgfs-v15-9-24fc37ead144@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19ref_tracker: add a static classname string to each ref_tracker_dirJeff Layton
A later patch in the series will be adding debugfs files for each ref_tracker that get created in ref_tracker_dir_init(). The format will be "class@%px". The current "name" string can vary between ref_tracker_dir objects of the same type, so it's not suitable for this purpose. Add a new "class" string to the ref_tracker dir that describes the the type of object (sans any individual info for that object). Also, in the i915 driver, gate the creation of debugfs files on whether the dentry pointer is still set to NULL. CI has shown that the ref_tracker_dir can be initialized more than once. Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://patch.msgid.link/20250618-reftrack-dbgfs-v15-4-24fc37ead144@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-23 07:31:21 +0000