summaryrefslogtreecommitdiff
path: root/drivers/hid/Makefile
AgeCommit message (Collapse)Author
2019-10-03HID: Add driver for Logitech gaming keyboards (G15, G15 v2)Hans de Goede
Add a driver to stop the extra "G" keys from sending F1 - F12 instead making them send KEY_GKEY# and also make the non-functional M1 - M3 and MR keys and the non-functional buttons below the LCD panel properly generated key events. Note the connect_mask and gkeys_settings_output_report variables may seem unnecessary since they are always set to the same value, these are there in preparation of adding support for the G, M and LCD keys on the G510 kbd. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-09-03HID: sb0540: add support for Creative SB0540 IR receiversBastien Nocera
Add a new hid driver for the Creative SB0540 IR receiver. This receiver is usually coupled with an RM-1500 or an RM-1800 remote control. The scrollwheels on the RM-1800 remote are not bound, as they are labelled for specific audio controls that don't usually exist on most systems. They can be remapped using standard Linux keyboard remapping tools. Signed-off-by: Bastien Nocera <bnocera@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-05-06Merge branches 'for-5.1/upstream-fixes', 'for-5.2/core', 'for-5.2/ish', ↵Jiri Kosina
'for-5.2/logitech', 'for-5.2/macally', 'for-5.2/picolcd', 'for-5.2/sensor' and 'for-5.2/u2fzero' into for-linus
2019-04-10HID: add driver for U2F Zero built-in LED and RNGAndrej Shadura
U2F Zero supports custom commands for blinking the LED and getting data from the internal hardware RNG. Expose the blinking function as a LED device, and the internal hardware RNG as an HWRNG so that it can be used to feed the enthropy pool. Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-04-03HID: macally: Add support for Macally ikey keyboardAlex Henrie
This enables the power and equals keys on the Macally ikey keyboard. Based on the Cougar gaming keyboard HID driver, which uses the same vendor ID. Signed-off-by: Alex Henrie <alexhenrie24@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-04-03HID: intel-ish-hid: ISH firmware loader client driverRushikesh S Kadam
This driver adds support for loading Intel Integrated Sensor Hub (ISH) firmware from host file system to ISH SRAM and start execution. At power-on, the ISH subsystem shall boot to an interim Shim loader-firmware, which shall expose an ISHTP loader device. The driver implements an ISHTP client that communicates with the Shim ISHTP loader device over the intel-ish-hid stack, to download the main ISH firmware. Signed-off-by: Rushikesh S Kadam <rushikesh.s.kadam@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Nick Crews <ncrews@chromium.org> Tested-by: Jett Rink <jettrink@chromium.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-03-05Merge branch 'for-5.1/hid-uclogic' into for-linusJiri Kosina
hid-uclogic driver revamp, in order to support wider range of Huion tablets, from Nikolai Kondrashov
2019-02-21HID: uclogic: Extract tablet parameter discovery into a moduleNikolai Kondrashov
Refactor and extract UC-Logic tablet initialization and parameter discovery into a module. For these tablets, the major part of parameter discovery cannot be separated from initialization so they have to be in the same module. Define explicitly and clearly what possible quirks the tablets may have to make the driver implementation easier and simpler. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-02-21HID: uclogic: Extract report descriptors to a moduleNikolai Kondrashov
As hid-uclogic has a lot of report descriptors already and there's going to be more, move them out of the driver code and into a separate module. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-02-21HID: viewsonic: Support PD1011 signature padNikolai Kondrashov
Add support for ViewSonic PD1011 signature (display) pad, which is also sold by Signotec under a different name. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-01-14Support for Maltron L90 keyboard media keysWilliam Whistler
The USB report descriptor sent by the Maltron L90 keyboard is invalid, causing the media key reports not to be accepted. This patch adds a driver which uses a report fixup to replace the descriptor. Signed-off-by: William Whistler <wtbw@wtbw.co.uk> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2018-09-24HID: hid-bigbenff: driver for BigBen Interactive PS3OFMINIPAD gamepadHanno Zulla
This is a driver to fix input mapping and add LED & force feedback support for the "BigBen Interactive Kid-friendly Wired Controller PS3OFMINIPAD SONY" gamepad with USB id 146b:0902. It was originally sold as a PS3 accessory and makes a very nice gamepad for Retropie. Signed-off-by: Hanno Zulla <kontakt@hanno.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-07-23HID: cougar: Add support for the Cougar 500k Gaming KeyboardDaniel M. Lambea
Cougar 500k Gaming Keyboard have some special function keys that make the keyboard stop responding once pressed. Implement the custom vendor interface that deals with the extended keypresses to fix. The bug can be reproduced by plugging in the keyboard, then pressing the rightmost part of the spacebar. Signed-off-by: Daniel M. Lambea <dmlambea@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-06-08Merge branch 'for-4.18/hid-steam' into for-linusJiri Kosina
Valve Steam Controller support from Rodrigo Rivas Costa
2018-05-15HID: add driver for Valve Steam ControllerRodrigo Rivas Costa
There are two ways to connect the Steam Controller: directly to the USB or with the USB wireless adapter. Both methods are similar, but the wireless adapter can connect up to 4 devices at the same time. The wired device will appear as 3 interfaces: a virtual mouse, a virtual keyboard and a custom HID device. The wireless device will appear as 5 interfaces: a virtual keyboard and 4 custom HID devices, that will remain silent until a device is actually connected. The custom HID device has a report descriptor with all vendor specific usages, so the hid-generic is not very useful. In a PC/SteamBox Valve Steam Client provices a software translation by using hidraw and a creates a uinput virtual gamepad and XTest keyboard/mouse. This driver intercepts the hidraw usage, so it can get out of the way when the Steam Client is in use. Signed-off-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-04-17HID: redragon: Fix modifier keys for Redragon Asura KeyboardRobert Munteanu
This adds a new driver for the Redragon Asura keyboard. The Asura keyboard contains an error in the HID descriptor which causes all modifier keys to be mapped to left shift. Additionally, we suppress the creation of a second, not working, keyboard device. Signed-off-by: Robert Munteanu <rombert@apache.org> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-04-05Merge branch 'for-4.17/hid-elan' into for-linusJiri Kosina
Pull new hid-elan driver, currently providing support for touchpad found in certain HP Pavilion x2 laptops.
2018-03-27HID: google: add google hammer HID driverWei-Ning Huang
Add Google hammer HID driver. This driver allow us to control hammer keyboard backlight and support future features. Signed-off-by: Wei-Ning Huang <wnhuang@google.com> Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-02-16HID: Add driver for USB ELAN TouchpadAlexandrov Stansilav
This is driver for usb touchpad found on HP Pavilion x2 10-p0xx laptop. On this device keyboard and touchpad connected as a single usb device with two interfaces: keyboard, which exposes ordinary keys and second interface is touchpad which also contains FlightMode button and audio mute led (which physically placed on keyboard for some reason). Initially, this touchpad works in mouse emulation mode, this driver will switch it to touchpad mode, which can track 5 fingers and can report coordinates for two of them. Signed-off-by: Alexandrov Stansilav <neko@nya.ai> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-21HID: Add special driver for Jabra devicesNiels Skou Olsen
Add a hid-jabra driver to the list of special drivers in hid-core. The driver prevents vendor defined HID usages (FF00-FFFF) in Jabra devices from being mapped to input events, that become unintended mouse events in the X11 server. Signed-off-by: Niels Skou Olsen <nolsen@jabra.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-21HID: core: move the dynamic quirks handling in coreBenjamin Tissoires
usbhid has a list of dynamic quirks in addition to a list of static quirks. There is not much USB specific in that, so move this part of the module in core so we can have one central place for quirks. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-10Merge branches 'for-4.13/multitouch', 'for-4.13/retrode', ↵Jiri Kosina
'for-4.13/transport-open-close-consolidation', 'for-4.13/upstream' and 'for-4.13/wacom' into for-linus
2017-06-22HID: Add driver for Retrode2 joypad adapterBastien Nocera
This driver does 2 things: - Apply the MULTI_INPUT quirk to create separate joypad device nodes for each one of the 4 connectors. - Rename the input devices so that their names are different, and allow users to recognise which device corresponds to which physical port, including the SNES (Mario Paint) Mouse. Signed-off-by: Bastien Nocera <hadess@hadess.net> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-05-11HID: ite: Add hid-ite driverHans de Goede
The ITE8595 keyboard uses the HID_GD_RFKILL_BTN usage code from the Wireless Radio Controls Application Collection Microsoft has defined for Windows 8 and later. However it has a quirk, when the rfkill hotkey is pressed it does generate a report for the collection, but the reported value is always 0. Luckily it is the only button in this collection / report, and it sends a report on release only, so receiving a report means the button was pressed. This commit adds a hid-ite driver which watches for the Wireless Radio Controls Application Collection report and then reports a KEY_RFKILL event, ignoring the value, making the rfkill on this keyboard work. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-05-02Merge branches 'for-4.11/upstream-fixes', 'for-4.12/accutouch', ↵Jiri Kosina
'for-4.12/cp2112', 'for-4.12/hid-core-null-state-handling', 'for-4.12/hiddev', 'for-4.12/i2c-hid', 'for-4.12/innomedia', 'for-4.12/logitech-hidpp-battery-power-supply', 'for-4.12/multitouch', 'for-4.12/nti', 'for-4.12/upstream' and 'for-4.12/wacom' into for-linus
2017-03-21HID: Accutouch: Add driver for ELO Accutouch 2216 USB TouchscreensMartyn Welch
The Accutouch 2216 is reporting BTN_LEFT/BTN_MOUSE rather than BTM_TOUCH in it's capabilities, which is what user space expects a touchscreen device to report. This is causing udev to consider the device to be a "VMware's USB mouse" rather than as a touchscreen, which results in a mouse cursor being displayed in Weston. This patch adds a special driver for the device to correct the capabilities reported. Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-03-06HID: Add quirk driver for NTI USB-SUN adapterJonathan Tomer
These adapters allow pre-USB Sun keyboards to be connected to USB-only machines, but include the wrong maximum keycode in their report descriptor, making most of the keys present on Sun keyboards but not 101-key PC keyboards nonfunctional. This patch implements a quirk that overrides the maximum keycode in the report descriptor. Signed-off-by: Jonathan Tomer <jktomer@google.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-12-14Merge branches 'for-4.10/asus', 'for-4.10/cp2112', ↵Jiri Kosina
'for-4.10/i2c-hid-nopower', 'for-4.10/intel-ish', 'for-4.10/mayflash', 'for-4.10/microsoft-surface-3', 'for-4.10/multitouch', 'for-4.10/sony', 'for-4.10/udraw-ps3', 'for-4.10/upstream' and 'for-4.10/wacom/generic' into for-linus
2016-11-15HID: udraw-ps3: Add support for the uDraw tablet for PS3Bastien Nocera
This adds support for the THQ uDraw tablet for the PS3, as 4 separate device nodes, so that user-space can easily consume events coming from the hardware. Note that the touchpad two-finger support is fairly unreliable, and a right-click can only be achieved with a two-finger tap with the two fingers slightly apart (about 1cm should be enough). Tested-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-03HID: Add new force feedback driver for Mayflash game controller adaptersMarcel Hasler
Add a new module named hid-mf that implements force feedback for game controller adapters manufactured by Mayflash. Currently only the PS3 adapter is supported, other adapters still need to be tested. Signed-off-by: Marcel Hasler <mahasler@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-08-17HID: intel_ish-hid: ISH Transport layerSrinivas Pandruvada
The ISH transport layer (ishtp) is a bi-directional protocol implemented on the top of PCI based inter processor communication layer. This layer offers: - Connection management - Flow control with the firmware - Multiple client sessions - Client message transfer - Client message reception - DMA for RX and TX for fast data transfer Refer to Documentation/hid/intel-ish-hid.txt for overview of the functionality implemented in this layer. Original-author: Daniel Drubin <daniel.drubin@intel.com> Reviewed-and-tested-by: Ooi, Joyce <joyce.ooi@intel.com> Tested-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Rann Bar-On <rb6@duke.edu> Tested-by: Atri Bhattacharya <badshah400@aim.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-07-28Merge branch 'for-4.8/hid-led' into for-linusJiri Kosina
Conflicts: drivers/hid/hid-thingm.c
2016-06-23HID: remove ThingM blink(1) driverHeiner Kallweit
Now that support for ThingM blink(1) was merged into the hid-led driver the dedicated driver for this device can be removed. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-06-17HID: add Alps I2C HID Touchpad-Stick supportMasaki Ota
Add support Alps I2C HID Touchpad and Stick device. Signed-off-by: Masaki Ota <masaki.ota@jp.alps.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-06-17HID: migrate USB LED driver from usb misc to hidHeiner Kallweit
This patch migrates the USB LED driver to the HID subsystem. Supported are Dream Cheeky Webmail Notifier / Friends Alert and Riso Kagaku Webmail Notifier. Benefits: - Avoid using USB low-level calls and use the HID subsystem instead (as this device provides a USB HID interface) - Use standard LED subsystem instead of proprietary sysfs entries, this allows e.g. to use the device with features like triggers Successfully tested with a Dream Cheeky Webmail Notifier and a Riso Kagaku Webmail Notifier compatible device. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-04-01HID: Asus X205TA keyboard driverYusuke Fujimaki
Asus X205TA built-in keyboard contains wrong logical maximum value in report descriptor. 0x05, 0x01, // Usage Page (Generic Desktop) 0x09, 0x06, // Usage (Keyboard) 0xa1, 0x01, // Collection (Application) 0x85, 0x01, // Report ID (1) 0x05, 0x07, // Usage Page (Keyboard/Keypad) 0x19, 0xe0, // Usage Minimum (224) 0x29, 0xe7, // Usage Maximum (231) 0x15, 0x00, // Logical Minimum (0) 0x25, 0x01, // Logical Maximum (1) 0x75, 0x01, // Report Size (1) 0x95, 0x08, // Report Count (8) 0x81, 0x02, // Input (Data,Array,Abs) 0x95, 0x01, // Report Count (1) 0x75, 0x08, // Report Size (8) 0x81, 0x03, // Input (Const,Var,Abs) 0x95, 0x05, // Report Count (5) 0x75, 0x01, // Report Size (1) 0x05, 0x08, // Usage (LED) 0x19, 0x01, // Usage Minimum (1) 0x29, 0x05, // Usage Maximum (5) 0x91, 0x02, // Output (Data,Var,Abs) 0x95, 0x01, // Report Count (1) 0x75, 0x03, // Report Size (3) 0x91, 0x03, // Output (Const,Var,Abs) 0x95, 0x06, // Report Count (6) 0x75, 0x08, // Report Size (8) 0x15, 0x00, // Logical Minimum (0) 0x25, 0x65, // Logical Maximum (101) * too small * 0x05, 0x07, // Usage Page (Keyboard/Keypad) 0x19, 0x00, // Usage Minimum (0) 0x29, 0xdd, // Usage Maximum (221) 0x81, 0x00, // Input(Data,Array,Abs) In Asus X205TA japanese keyboard model,there are language specific keys over usage id 101. This patch correct wrong logical maximum in report descriptor. Signed-off-by: Yusuke Fujimaki <usk.fujimaki@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-03-02HID: Support for CMedia CM6533 HID audio jack controlsBen Chen
The C-Media CM6533 is a USB audio chip featuring it's jack detection capability.The device originates an interrupt transfer via HID interface each time when a jack event occurs. The purpose of this patch is to handle hid raw events to keep the operating system informed of user interactions. Signed-off-by: Ben Chen <ben_chen@bizlinktech.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-11-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: "Highlights: - Intel Skylake Win8 precision touchpads support fixes/improvements from Mika Westerberg - Lenovo Yoga 2 quirk from Ritesh Raj Sarraf - potential uninitialized buffer access fix in HID core from Richard Purdie - Wacom Intuos and Wacom Cintiq 2 support improvements from Jason Gerecke and Ping Cheng - initiation of sysfs deprecation process for most of the roccat drivers, from the roccat support maintiner Stefan Achatz - quite a few device ID / quirk additions and small fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (30 commits) HID: logitech: Add support for G29 HID: logitech: Simplify wheel detection scheme HID: wacom: Call 'wacom_query_tablet_data' only after 'hid_hw_start' HID: wacom: Fix ABS_MISC reporting for Cintiq Companion 2 HID: wacom: Remove useless conditions from 'wacom_query_tablet_data' HID: wacom: fix Intuos wireless report id issue HID: fix some indenting issues HID: wacom: Expect 'touch_max' touches if HID_DG_CONTACTCOUNT not present HID: wacom: Tie cached HID_DG_CONTACTCOUNT indices to report ID HID: roccat: Fixed resubmit: Deprecating most Roccat sysfs attributes HID: wacom: Report full pressure range for Intuos, Cintiq 13HD Touch HID: wacom: Add support for Cintiq Companion 2 HID: multitouch: Fetch feature reports on demand for Win8 devices HID: sensor-hub: Add quirk for Lenovo Yoga 2 with ITE Chips HID: usbhid: Fix for the WiiU adapter from Mayflash HID: corsair: boolify struct k90_led.removed HID: corsair: Add Corsair Vengeance K90 driver HID: hid-input: allow input_configured callback return errors HID: multitouch: Add suffix for HID_DG_TOUCHPAD HID: i2c-hid: Fill in physical device providing HID functionality ...
2015-10-26HID: hid-gfrm: Google Fiber TV Box remote controlsPetri Gynther
Add HID driver for Google Fiber TV Box remote controls Signed-off-by: Petri Gynther <pgynther@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-30HID: corsair: Add Corsair Vengeance K90 driverClément Vuchener
This patch implements a HID driver for the Corsair Vengeance K90 keyboard. It fixes the behaviour of the keys using incorrect HID usage codes and exposes the macro playback mode and current profile to the user space through sysfs attributes. It also adds two LED class devices controlling the "record" LED and the backlight. Signed-off-by: Clément Vuchener <clement.vuchener@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-08-18HID: gembird: add new driver to fix Gembird JPD-DualForce 2Benjamin Tissoires
This gamepad advertise 5 absolute axis while 4 are actually used. The second Z axis shows some garbage, so it has to be ignored by HID. The first Z axis and the Rz one are actually Rx and Ry. Remap them. We could also just remap and ignore the axis in .input_mapping(). I went ahead with .report_fixup() first, so here it is. Reported-by: Orivej Desh <orivej@gmx.fr> Tested-by: Orivej Desh <orivej@gmx.fr> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-05-26HID: Makefile: fix alignment of objs-* entriesAntonio Ospite
Most of the entries are aligned with TABs, fix those which are not. Signed-off-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-04-13Merge branch 'for-4.1/sensor-hub' into for-linusJiri Kosina
Conflicts: drivers/iio/common/hid-sensors/hid-sensor-trigger.c include/linux/hid-sensor-hub.h
2015-04-10HID: sensor: Custom and Generic sensor supportSrinivas Pandruvada
HID Sensor Spec defines two usage ids for custom sensors HID_USAGE_SENSOR_TYPE_OTHER_CUSTOM (0x09, 0xE1) HID_USAGE_SENSOR_TYPE_OTHER_GENERIC(0x09, 0xE2) In addition the standard also defines usage ids for custom fields. The purpose of these sensors is to extend the functionality or provide a way to obfuscate the data being communicated by a sensor. Without knowing the mapping between the data and its encapsulated form, it is difficult for an driver to determine what data is being communicated by the sensor. This allows some differentiating use cases, where vendor can provide applications. Since these can't be represented by standard sensor interfaces like IIO, we present these as fields with - type (input/output) - units - min/max - get/set value In addition an dev interface to transfer report events. Details about this interface is described in /Documentation/hid/hid-sensor.txt. Manufacturers should not use these ids for any standard sensors, otherwise the the product/vendor id can be added to black list. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-03HID: uclogic: merge hid-huion driver in hid-uclogicNikolai Kondrashov
Merge the hid-huion driver into hid-uclogic as all the devices supported by hid-huion are in fact UC-Logic devices. Signed-off-by: Nikolai Kondrashov <Nikolai.Kondrashov@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-09Merge branches 'for-3.19/upstream-fixes', 'for-3.20/apple', ↵Jiri Kosina
'for-3.20/betop', 'for-3.20/lenovo', 'for-3.20/logitech', 'for-3.20/rmi', 'for-3.20/upstream' and 'for-3.20/wacom' into for-linus
2015-01-21HID: Use Kbuild idiom in MakefilesMichal Marek
Use <driver>-$(CONFIG_FOO) syntax to build multipart objects with optional parts, since all the config options are bool. Also, delete the obvious comments in the usbhid Makefile. Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-12-22HID: add BETOP game controller force feedback supportHuang Bo
Adds force feedback support for BETOP USB game controllers. These devices are mass produced in China. Signed-off-by: Huang Bo <huangbobupt@163.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-12-12Merge branches 'for-3.19/hid-report-len', 'for-3.19/i2c-hid', ↵Jiri Kosina
'for-3.19/lenovo', 'for-3.19/logitech', 'for-3.19/microsoft', 'for-3.19/plantronics', 'for-3.19/rmi', 'for-3.19/sony' and 'for-3.19/wacom' into for-linus