summaryrefslogtreecommitdiff
path: root/drivers/hid/i2c-hid
AgeCommit message (Collapse)Author
2019-11-29Merge branch 'for-5.5/i2c' into for-linusJiri Kosina
- removal of superfluous delay (You-Sheng Yang)
2019-11-15HID: i2c-hid: Reset ALPS touchpads on resumeKai-Heng Feng
Commit 52cf93e63ee6 ("HID: i2c-hid: Don't reset device upon system resume") fixes many touchpads and touchscreens, however ALPS touchpads start to trigger IRQ storm after system resume. Since it's total silence from ALPS, let's bring the old behavior back to ALPS touchpads. Fixes: 52cf93e63ee6 ("HID: i2c-hid: Don't reset device upon system resume") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-11-15HID: i2c-hid: fix no irq after reset on raydium 3118Aaron Ma
On some ThinkPad L390 some raydium 3118 touchscreen devices doesn't response any data after reset, but some does. Add this ID to no irq quirk, then don't wait for any response alike on these touchscreens. All kinds of raydium 3118 devices work fine. BugLink: https://bugs.launchpad.net/bugs/1849721 Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-11-15HID: i2c-hid: remove orphaned member sleep_delayYou-Sheng Yang
This was introduced in commit 00b790ea545b ("HID: i2c-hid: Add a small delay after sleep command for Raydium touchpanel") which has been effectively reverted by commit 67b18dfb8cfc ("HID: i2c-hid: Remove runtime power management"). Signed-off-by: You-Sheng Yang <vicamo.yang@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-11-02HID: i2c-hid: Send power-on command after resetHans de Goede
Before commit 67b18dfb8cfc ("HID: i2c-hid: Remove runtime power management"), any i2c-hid touchscreens would typically be runtime-suspended between the driver loading and Xorg or a Wayland compositor opening it, causing it to be resumed again. This means that before this change, we would call i2c_hid_set_power(OFF), i2c_hid_set_power(ON) before the graphical session would start listening to the touchscreen. It turns out that at least some SIS touchscreens, such as the one found on the Asus T100HA, need a power-on command after reset, otherwise they will not send any events. Fixes: 67b18dfb8cfc ("HID: i2c-hid: Remove runtime power management") Cc: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-10-18HID: i2c-hid: add Trekstor Primebook C11B to descriptor overrideHans de Goede
The Primebook C11B uses the SIPODEV SP1064 touchpad. There are 2 versions of this 2-in-1 and the touchpad in the older version does not supply descriptors, so it has to be added to the override list. Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-10-18HID: i2c-hid: Remove runtime power managementKai-Heng Feng
Runtime power management in i2c-hid brings lots of issues, such as: - When transitioning from display manager to desktop session, i2c-hid was closed and opened, so the device was set to SLEEP and ON in a short period. Vendors confirmed that their devices can't handle fast ON/SLEEP command because Windows doesn't have this behavior. - When rebooting, i2c-hid was closed, and the driver core put the device back to full power before shutdown. This behavior also triggers a quick SLEEP and ON commands that some devices can't handle, renders an unusable touchpad after reboot. - Most importantly, my power meter reports little to none energy saving when i2c-hid is runtime suspended. So let's remove runtime power management since there is no actual benefit. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-09-04HID: i2c-hid: modify quirks for weida's devicesHungNien Chen
This 'SET_PWR_WAKEUP_DEV' quirk only works for weida's devices with pid 0xC300 & 0xC301. Some weida's devices with other pids also need this quirk now. Use 'HID_ANY_ID' instead of 0xC300 to make all of weida's devices can be fixed on the power on issue. This modification should be safe since devices without power on issue will send the power on command only once. Signed-off-by: HungNien Chen <hn.chen@weidahitech.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-06-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: - regression fixes (reverts) for module loading changes that turned out to be incompatible with some userspace, from Benjamin Tissoires - regression fix for special Logitech unifiying receiver 0xc52f, from Hans de Goede - a few device ID additions to logitech driver, from Hans de Goede - fix for Bluetooth support on 2nd-gen Wacom Intuos Pro, from Jason Gerecke * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: logitech-dj: Fix 064d:c52f receiver support Revert "HID: core: Call request_module before doing device_add" Revert "HID: core: Do not call request_module() in async context" Revert "HID: Increase maximum report size allowed by hid_field_extract()" HID: a4tech: fix horizontal scrolling HID: hyperv: Add a module description line HID: logitech-hidpp: Add support for the S510 remote control HID: multitouch: handle faulty Elo touch device HID: wacom: Sync INTUOSP2_BT touch state after each frame if necessary HID: wacom: Correct button numbering 2nd-gen Intuos Pro over Bluetooth HID: wacom: Send BTN_TOUCH in response to INTUOSP2_BT eraser contact HID: wacom: Don't report anything prior to the tool entering range HID: wacom: Don't set tool type until we're in range HID: rmi: Use SET_REPORT request on control endpoint for Acer Switch 3 and 5 HID: logitech-hidpp: add support for the MX5500 keyboard HID: logitech-dj: add support for the Logitech MX5500's Bluetooth Mini-Receiver HID: i2c-hid: add iBall Aer3 to descriptor override
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-09HID: i2c-hid: add iBall Aer3 to descriptor overrideKai-Heng Feng
This device uses the SIPODEV SP1064 touchpad, which does not supply descriptors, so it has to be added to the override list. BugLink: https://bugs.launchpad.net/bugs/1825718 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-04-11Revert "HID: i2c-hid: Disable runtime PM on Synaptics touchpad"Hui Wang
This reverts commit 74e7c6c877f620d65a8269692d089bbd066f626c. It finally turns out the touchpad is an engineering sample and it is not the Synaptics touchpad. Let us revert this patch otherwise it will affect the real Synaptics touchpad. Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-04-01HID: i2c-hid: Disable runtime PM on Synaptics touchpadHui Wang
We have a new Dell laptop which has the synaptics I2C touchpad (06cb:7e7e) on it. After booting up the Linux, the touchpad doesn't work, there is no interrupt when touching the touchpad, after disable the runtime PM, everything works well. I also tried the quirk of I2C_HID_QUIRK_DELAY_AFTER_SLEEP, it is better after applied this quirk, there are interrupts but data it reports is invalid. Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-03-05Merge branch 'for-5.1/i2c-hid' into for-linusJiri Kosina
Fix dmesg flood for Elan touchpanels which are too slow to assert IRQ from Kai-Heng Feng
2019-01-21HID: i2c-hid: Ignore input report if there's no data present on Elan touchpanelsKai-Heng Feng
While using Elan touchpads, the message floods: [ 136.138487] i2c_hid i2c-DELL08D6:00: i2c_hid_get_input: incomplete report (14/65535) Though the message flood is annoying, the device it self works without any issue. I suspect that the device in question takes too much time to pull the IRQ back to high after I2C host has done reading its data. Since the host receives all useful data, let's ignore the input report when there's no data. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-01-14HID: i2c-hid: Disable runtime PM on Goodix touchpadKai-Heng Feng
A Goodix touchpad doesn't work. Touching the touchpad can trigger IRQ but there's no input event from HID subsystem. Turns out it reports some invalid data: [ 22.136630] i2c_hid i2c-DELL091F:00: input: 0b 00 01 00 00 00 00 00 00 00 00 After some trial and error, it's another device that doesn't work well with ON/SLEEP commands. Disable runtime PM to fix the issue. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-01-03HID: i2c-hid: Add Odys Winbook 13 to descriptor overrideHans de Goede
The Odys Winbook 13 uses a SIPODEV SP1064 touchpad, which does not supply descriptors, add this to the DMI descriptor override list, fixing the touchpad not working. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1526312 Reported-by: Rene Wagner <redhatbugzilla@callerid.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-11-19HID: i2c-hid: Disable runtime PM for LG touchscreenKai-Heng Feng
LG touchscreen (1fd2:8001) stops working after reboot: [ 4.859153] i2c_hid i2c-SAPS2101:00: i2c_hid_get_input: incomplete report (64/66) [ 4.936070] i2c_hid i2c-SAPS2101:00: i2c_hid_get_input: incomplete report (64/66) [ 9.948224] i2c_hid i2c-SAPS2101:00: failed to reset device. The device in question stops working after receives SLEEP, ON, SLEEP commands in a short period. The scenario is like this: - Once the desktop session closes, it also closed the hid device, so the device gets runtime suspended and receives a SLEEP command. - Before calling shutdown callback, it gets runtime resumed and received an ON command. - In the shutdown callback, it receives another SLEEP command. I failed to find a reliable interval between ON/SLEEP commands that can make it work, so let's simply disable runtime PM for the device. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-11-06Merge branch 'master' into for-4.20/upstream-fixesJiri Kosina
Pull in a merge commit that brought in 3b692c55e58d ("HID: asus: only support backlight when it's not driven by WMI") so that fixup could be applied on top of it.
2018-10-31HID: i2c-hid: add Direkt-Tek DTLAPY133-1 to descriptor overrideJulian Sax
This device uses the SIPODEV SP1064 touchpad, which does not supply descriptors, so it has to be added to the override list. Reported-by: Tim Aldridge <taldridge@mac.com> Signed-off-by: Julian Sax <jsbc@gmx.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-10-27i2c-hid: properly terminate i2c_hid_dmi_desc_override_table[] arrayLinus Torvalds
Commit 9ee3e06610fd ("HID: i2c-hid: override HID descriptors for certain devices") added a new dmi_system_id quirk table to override certain HID report descriptors for some systems that lack them. But the table wasn't properly terminated, causing the dmi matching to walk off into la-la-land, and starting to treat random data as dmi descriptor pointers, causing boot-time oopses if you were at all unlucky. Terminate the array. We really should have some way to just statically check that arrays that should be terminated by an empty entry actually are so. But the HID people really should have caught this themselves, rather than have me deal with an oops during the merge window. Tssk, tssk. Cc: Julian Sax <jsbc@gmx.de> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26HID: i2c-hid: Add a small delay after sleep command for Raydium touchpanelKai-Heng Feng
Raydium touchpanel (2386:4B33) sometimes does not work in desktop session although it works in display manager. During user logging, the display manager exits, close the HID device, then the device gets runtime suspended and powered off. The desktop session begins shortly after, opens the HID device, then the device gets runtime resumed and powered on. If the trasition from display manager to desktop sesesion is fast, the touchpanel cannot switch from powered off to powered on in short timeframe. So add a small delay to workaround the issue. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-10-23Merge branch 'for-4.20/i2c-hid' into for-linusJiri Kosina
- general cleanups of hid-i2c driver - SPIODEV device descriptor fixes
2018-09-29HID: i2c-hid: override HID descriptors for certain devicesJulian Sax
A particular touchpad (SIPODEV SP1064) refuses to supply the HID descriptors. This patch provides the framework for overriding these descriptors based on DMI data. It also includes the descriptors for said touchpad, which were extracted by listening to the traffic of the windows filter driver, as well as the DMI data for the laptops known to use this device. Relevant Bug: https://bugzilla.redhat.com/show_bug.cgi?id=1526312 Cc: Hans de Goede <hdegoede@redhat.com> Reported-and-tested-by: ahormann@gmx.net Reported-and-tested-by: Bruno Jesus <bruno.fl.jesus@gmail.com> Reported-and-tested-by: Dietrich <enaut.w@googlemail.com> Reported-and-tested-by: kloxdami@yahoo.com Signed-off-by: Julian Sax <jsbc@gmx.de> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-09-24HID: i2c-hid: Remove RESEND_REPORT_DESCR quirk and its handlingHans de Goede
Commit 52cf93e63ee6 ("HID: i2c-hid: Don't reset device upon system resume") removes the need for the RESEND_REPORT_DESCR quirk for Raydium devices, but kept it for the SIS device id 10FB touchscreens, as the author of that commit could not determine if the quirk is still necessary there. I've tested suspend/resume on a Toshiba Click Mini L9W-B which is the device for which this quirk was added in the first place and with the "Don't reset device upon system resume" fix the quirk is no longer necessary, so this commit removes it. Note even better I also had some other devices with SIS touchscreens which suspend/resume issues, where the RESEND_REPORT_DESCR quirk did not help. I've also tested these devices with the "Don't reset device upon system resume" fix and I'm happy to report that that fix also fixes touchscreen resume on the following devices: Asus T100HA Asus T200TA Peaq C1010 Cc: Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-09-14HID: i2c-hid: disable runtime PM operations on hantick touchpadAnisse Astier
This hantick HTIX5288 touchpad can quickly fall in a wrong state if there are too many open/close operations. This will either make it stop reporting any input, or will shift all the input reads by a few bytes, making it impossible to decode. Here, we never release the probed touchpad runtime pm while the driver is loaded, which should disable all runtime pm suspend/resumes. This fast repetition of sleep/wakeup is also more likely to happen when using runtime PM, which is why the quirk is done there, and not for all power downs, which would include suspend or module removal. Signed-off-by: Anisse Astier <anisse@astier.eu> Cc: stable@vger.kernel.org Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Philip Müller <philm@manjaro.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-09-06HID: i2c-hid: Don't reset device upon system resumeKai-Heng Feng
Raydium touchscreen triggers interrupt storm after system-wide suspend: [ 179.085033] i2c_hid i2c-CUST0000:00: i2c_hid_get_input: incomplete report (58/65535) According to Raydium, Windows driver does not reset the device after system resume. The HID over I2C spec does specify a reset should be used at intialization, but it doesn't specify if reset is required for system suspend. Tested this patch on other i2c-hid touchpanels I have and those touchpanels do work after S3 without doing reset. If any regression happens to other touchpanel vendors, we can use quirk for Raydium devices. There's still one device uses I2C_HID_QUIRK_RESEND_REPORT_DESCR so keep it there. Cc: Aaron Ma <aaron.ma@canonical.com> Cc: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-08-28HID: i2c-hid: Fix flooded incomplete report after S3 on Rayd touchscreenAceLan Kao
The incomplete report flooded after S3 and touchscreen becomes malfunctioned. [ 1367.646244] i2c_hid i2c-CUST0000:00: i2c_hid_get_input: incomplete report (58/18785) [ 1367.649471] i2c_hid i2c-CUST0000:00: i2c_hid_get_input: incomplete report (58/28743) [ 1367.651092] i2c_hid i2c-CUST0000:00: i2c_hid_get_input: incomplete report (58/26757) [ 1367.652658] i2c_hid i2c-CUST0000:00: i2c_hid_get_input: incomplete report (58/52280) [ 1367.654287] i2c_hid i2c-CUST0000:00: i2c_hid_get_input: incomplete report (58/56059) Adding device ID, 04F3:30CC, to the quirk to re-send report description after resume. Cc: stable@vger.kernel.org Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-08-20Merge branch 'for-4.19/i2c-hid' into for-linusJiri Kosina
Low voltage support for i2c-hid
2018-07-09HID: i2c-hid: Fix "incomplete report" noiseJason Andryuk
Commit ac75a041048b ("HID: i2c-hid: fix size check and type usage") started writing messages when the ret_size is <= 2 from i2c_master_recv. However, my device i2c-DLL07D1 returns 2 for a short period of time (~0.5s) after I stop moving the pointing stick or touchpad. It varies, but you get ~50 messages each time which spams the log hard. [ 95.925055] i2c_hid i2c-DLL07D1:01: i2c_hid_get_input: incomplete report (83/2) This has also been observed with a i2c-ALP0017. [ 1781.266353] i2c_hid i2c-ALP0017:00: i2c_hid_get_input: incomplete report (30/2) Only print the message when ret_size is totally invalid and less than 2 to cut down on the log spam. Fixes: ac75a041048b ("HID: i2c-hid: fix size check and type usage") Reported-by: John Smith <john-s-84@gmx.net> Cc: stable@vger.kernel.org Signed-off-by: Jason Andryuk <jandryuk@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-06-25HID: i2c-hid: Add vddl regulator controlStephen Boyd
Some wacom w9013 devices have a vddl supply for "low valtage" requirements. Add support in this driver to turn on this low voltage supply. We can also drop a handful of error messages because the regulator core is already printing an error when bulk regulators fail to enable or disable. Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Dmitry Torokhov <dtor@chromium.org> Cc: Doug Anderson <dianders@chromium.org> Acked-by: Rob Herring <robh@kernel.org> Cc: <devicetree@vger.kernel.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-06-25HID: i2c-hid: Use devm to allocate i2c_hid structStephen Boyd
Use devm here to save some lines and prepare for bulk regulator usage in this driver. Otherwise, when we devm bulk get regulators we'll free the containing i2c_hid structure and try to put regulator pointers from freed memory. Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Dmitry Torokhov <dtor@chromium.org> Cc: Doug Anderson <dianders@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-06-08Merge branch 'for-4.18/i2c-hid' into for-linusJiri Kosina
Assorted smaller fixes to i2c-hid driver
2018-05-30HID: i2c-hid: remove i2c_hid_open_mutSebastian Andrzej Siewior
Since commit 85ae91133152 ("HID: i2c-hid: remove custom locking from i2c_hid_open/close") there are no more users of i2c_hid_open_mut. Remove the unused mutex. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Jiri Kosina <jikos@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-05-15HID: i2c-hid: check if device is there before really probingDmitry Torokhov
On many Chromebooks touch devices are multi-sourced; the components are electrically compatible and one can be freely swapped for another without changing the OS image or firmware. To avoid bunch of scary messages when device is not actually present in the system let's try testing basic communication with it and if there is no response terminate probe early with -ENXIO. Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-05-09HID: i2c-hid: Add RESEND_REPORT_DESCR quirk for Toshiba Click Mini L9W-BHans de Goede
The 0457:10fb touchscreen found on the Toshiba Click Mini L9W-B needs to have a report-decriptors command send to it on resume in order for the touchscreen to start generating events again on resume. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-04-19HID: i2c-hid: fix inverted return value from i2c_hid_command()Jiri Kosina
i2c_hid_command() returns non-zero in error cases (the actual errno). Error handling in for I2C_HID_QUIRK_RESEND_REPORT_DESCR case in i2c_hid_resume() had the check inverted; fix that. Fixes: 3e83eda467 ("HID: i2c-hid: Fix resume issue on Raydium touchscreen device") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-04-16HID: i2c-hid: Silently fail probe for CHPN0001 touchscreenHans de Goede
The CHPN0001 ACPI device has a _CID of PNP0C50 and even has the _DSM to get the HID descriptor address, but it is not a HID device at all. It uses its own protocol which is handled by the (still being upstreamed) chipone_icn8505 driver. I guess the _CID and the _DSM are the result of a copy and paste job when the vendor was building the ACPI tables. Before this patch the i2c_hid_driver's probe function will fail with a "hid_descr_cmd failed" error. This commit makes the i2c_hid_driver's probe function instead silently ignored devices with an ACPI id of CHPN0001. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-04-16HID: i2c-hid: Move i2c_hid_acpi_pdata error reporting to inside the functionHans de Goede
Log an error in all error paths of i2c_hid_acpi_pdata() instead of having the caller log a generic error. This is a preparation patch for allowing i2c_hid_acpi_pdata() to fail silently under certain conditions. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-04-12HID: i2c-hid: Fix resume issue on Raydium touchscreen deviceAaron Ma
When Rayd touchscreen resumed from S3, it issues too many errors like: i2c_hid i2c-RAYD0001:00: i2c_hid_get_input: incomplete report (58/5442) And all the report data are corrupted, touchscreen is unresponsive. Fix this by re-sending report description command after resume. Add device ID as a quirk. Cc: stable@vger.kernel.org Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-04-05Merge branch 'for-4.17/hid-i2c' into for-linusJiri Kosina
Small hid-i2c acpi cleanup.
2018-02-16HID: i2c-hid: fix size check and type usageAaron Ma
When convert char array with signed int, if the inbuf[x] is negative then upper bits will be set to 1. Fix this by using u8 instead of char. ret_size has to be at least 3, hid_input_report use it after minus 2 bytes. Cc: stable@vger.kernel.org Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-02-16HID: i2c-hid: Use ACPI_COMPANION() directlyAndy Shevchenko
Instead of doing additional checks and functional calls, just get ACPI companion device directly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-21HID: i2c-hid: Allow ACPI systems to specify "post-power-on-delay-ms"Rajat Jain
The property "post-power-on-delay-ms" allows a platform to specify the delay needed after power-on, but only via device trees currently. Use device_property_* instead of of_* reads to allow ACPI systems to also provide the same information. This is useful for Wacom hardware on ACPI systems. Signed-off-by: Rajat Jain <rajatja@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-15Merge branch 'for-4.15/upstream' into for-linusJiri Kosina
- cp2112: GPIO error handling and Kconfig fixes from Sébastien Szymanski - i2c-hid: fixup / quirk for Apollo-Lake based laptops, from Hans de Goede - Input/Core: add eraser tool support, from Ping Cheng - small assorted code fixes Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-09HID: i2c-hid: Add no-irq-after-reset quirk for 0911:5288 deviceHans de Goede
Several cheap Apollo Lake based laptops / 2-in-1s use an i2c-hid mt touchpad which is advertised by the DSDT with an ACPI HID of "SYNA3602", this touchpad can be found on e.g. the Cube Thinker and the EZBook 3 Pro. On my "T-bao Tbook air" the i2c-hid driver fails to bind to this touchpad: "i2c_hid i2c-SYNA3602:00: failed to reset device.". After some debuging this it seems that this touchpad simply never sends an interrupt after a reset as expected by the i2c hid driver. This commit adds a quirk for this device, making i2c_hid_command sleep 100ms after a reset instead of waiting for an irq, fixing i2c-hid failing to bind to this touchpad. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-09-13HID: i2c-hid: allocate hid buffers for real worst caseAdrian Salido
The buffer allocation is not currently accounting for an extra byte for the report id. This can cause an out of bounds access in function i2c_hid_set_or_send_report() with reportID > 15. Cc: stable@vger.kernel.org Signed-off-by: Adrian Salido <salidoa@google.com> Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-07-27HID: introduce hid_is_using_ll_driverJason Gerecke
Although HID itself is transport-agnostic, occasionally a driver may want to interact with the low-level transport that a device is connected through. To do this, we need to know what kind of bus is in use. The first guess may be to look at the 'bus' field of the 'struct hid_device', but this field may be emulated in some cases (e.g. uhid). More ideally, we can check which ll_driver a device is using. This function introduces a 'hid_is_using_ll_driver' function and makes the 'struct hid_ll_driver' of the four most common transports accessible through hid.h. Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Acked-By: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-07-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: - open/close tracking improvements from Dmitry Torokhov - battery support improvements in Wacom driver from Jason Gerecke - Win8 support fixes from Benjamin Tissories and Hans de Geode - misc fixes to Intel-ISH driver from Arnd Bergmann - support for quite a few new devices and small assorted fixes here and there * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (35 commits) HID: intel-ish-hid: Enable Gemini Lake ish driver HID: intel-ish-hid: Enable Cannon Lake ish driver HID: wacom: fix mistake in printk HID: multitouch: optimize the sticky fingers timer HID: multitouch: fix rare Win 8 cases when the touch up event gets missing HID: multitouch: use BIT macro HID: Add driver for Retrode2 joypad adapter HID: multitouch: Add support for Google Rose Touchpad HID: multitouch: Support PTP Stick and Touchpad device HID: core: don't use negative operands when shift HID: apple: Use country code to detect ISO keyboards HID: remove no longer used hid->open field greybus: hid: remove custom locking from gb_hid_open/close HID: usbhid: remove custom locking from usbhid_open/close HID: i2c-hid: remove custom locking from i2c_hid_open/close HID: serialize hid_hw_open and hid_hw_close HID: usbhid: do not rely on hid->open when deciding to do IO HID: hiddev: use hid_hw_power instead of usbhid_get/put_power HID: hiddev: use hid_hw_open/close instead of usbhid_open/close HID: asus: Add support for Zen AiO MD-5110 keyboard ...
2017-07-10Merge branches 'for-4.13/multitouch', 'for-4.13/retrode', ↵Jiri Kosina
'for-4.13/transport-open-close-consolidation', 'for-4.13/upstream' and 'for-4.13/wacom' into for-linus
generated by cgit (git 2.34.1) at 2024-05-29 23:44:22 +0000