summaryrefslogtreecommitdiff
path: root/drivers/hid/wacom.h
AgeCommit message (Collapse)Author
2017-05-05HID: wacom: Add ability to provide explicit battery status infoJason Gerecke
At the moment, our driver relies on 'wacom_battery_get_property()' to determine the most likely battery state (e.g charging, discharging, or full) based on the information available. It is not always possible for the function to properly determine this, however. For instance, whenever an AES pen leaves proximity the battery state becomes indeterminite. This commit adds the ability to provide it with explict state information if desired. Whenever explicit state is not required (the majority of circumstances), WACOM_POWER_SUPPLY_STATUS_AUTO can be used in its place. Three uses of explicit battery status are added: two wireless disconnect paths and the AES case mentioned above. Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Ping Cheng <ping.cheng@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-03-06HID: wacom: generic: add mode change touch keyBenjamin Tissoires
Wacom Cintiq Pro added a touch key to switch the tablet between display and opaque mode. This patch informs the change by removing the old devices and creating new ones with proper properties. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Ping Cheng <ping.cheng@wacom.com> Tested-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-02-20Merge branches 'for-4.10/upstream-fixes', 'for-4.11/intel-ish', ↵Jiri Kosina
'for-4.11/mayflash', 'for-4.11/microsoft', 'for-4.11/rmi', 'for-4.11/upstream' and 'for-4.11/wacom' into for-linus
2017-01-26HID: wacom: generic: support LEDsAaron Armstrong Skomra
Add support for the LEDs around the mode switch to the generic code path in support of the second generation Intuos Pro. Signed-off-by: Aaron Skomra <aaron.skomra@wacom.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-01-26HID: wacom: generic: add vendor defined touchAaron Armstrong Skomra
Add vendor defined touch to support the second generation Intuos Pro. Previously all generic Wacom devices used true HID to report their touch. Signed-off-by: Aaron Skomra <aaron.skomra@wacom.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-01-23HID: wacom: do not attempt to switch mode while in probeBenjamin Tissoires
The Intuos Pro seems to not like when we set the features right after being powered up. Instead of waiting during probe, we can schedule the switch mode and LED control in a deferred worker so that we don't have the 5 secs of delay from USB when the device is not accessible. The USB timeout delays were really a pain because if you happen to unplug the tablet while it is still waiting, you are just adding 5 second timeouts to the USB stack. Which means that a new plug of the same tablet will also gets delayed, and will also attempt to access the hardware while in .probe(). So the tablet doesn't appear in the dmesg, the user unplug/replug it to make it appearing... and so on so forth. Really, this is for the best :) Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-01-06HID: remove use of DRIVER_LICENSEGrant Grundler
Local "#define DRIVER_LICENSE" obfuscates which license is used in MODULE_LICENSE(). "fgrep -R MODULE_LICENSE" is more informative when the string is hard coded in MODULE_LICENSE. Signed-off-by: Grant Grundler <grundler@google.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-12-09HID: wacom: generic: Don't return a value for wacom_wac_eventPing Cheng
It is unnecessary to return a value since nothing is expecting a value from it. Signed-off-by: Ping Cheng <ping.cheng@wacom.com> Reviewed-By: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-08-05HID: wacom: power_supply: provide the actual model_nameBenjamin Tissoires
Instead of displaying a generic "tablet", now g-c-c shows a pretty "Wacom Intuos Pro S (WL)". Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-08-05HID: wacom: power_supply: remove ac informationBenjamin Tissoires
Looks like upowerd is ignoring this since October 2013, so there is no need to keep this around in the kernel. And as mentioned in 8aaa592 (linux: Ignore ACs coming from devices) in the upower tree, "We already have enough information on the device battery". Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-08-05HID: wacom: leds: handle the switch of the LEDs directly in the kernelBenjamin Tissoires
The EKR switches the LED directly, and there is no point in having userspace handling the switch it self when it's easy enough to do in the kernel. The other benefit is that now userspace does not need to have root access to the LED but need only to read them with user privileges. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-08-05HID: wacom: leds: actually release the LEDs on disconnectBenjamin Tissoires
There is a bug (?) in devm_led_classdev_register() in which its increments the refcount of the parent. If the parent is an input device, that means the ref count never reaches 0 when devm_input_device_release() gets called. This means that the LEDs and all the devres resources attached to the input device are not released. Manually force the release of the group so that the leds are released once we are done using them. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-08-05HID: wacom: leds: use the ledclass instead of custom made sysfs filesBenjamin Tissoires
The now obsolete sysfs files for LEDs and EKRemote are kept for backward compatibility. Both the EKR (read-only) and the regular Cintiqs and Intuos are now sharing the same led API. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-08-05HID: wacom: EKR: have one power_supply per remoteBenjamin Tissoires
Previously, all the remotes attached to the same receiver would share the same power_supply. That's not good as the remotes will constantly change the battery information according to their own state. To have something generic enough, we introduce struct wacom_battery which regroups all the information we need for a battery. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-08-05HID: wacom: EKR: allocate one input node per remoteBenjamin Tissoires
Thanks to devres, we can now afford to create more than one input node without having to overload the remove/failure paths. Having one input node per remote is something which should have been implemented from start but the probability of having users with several remotes is quite low. Anyway, still, better looking at the future and implement things properly. Remote input nodes will be freed/unregistered magically as they are created in the devres group &remote->remotes[index]. We need to open the hid node now that the remotes are dynamically allocated. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-08-05HID: wacom: EKR: have one array of struct remotes instead of many arraysBenjamin Tissoires
No functional changes, just a prep patch for the one after. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-08-05HID: wacom: EKR: have the wacom resources dynamically allocatedBenjamin Tissoires
If we want to have one input device per remote, it's better to have our own struct wacom_remote which is dynamically allocated. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-08-05HID: wacom: EKR: add a worker to add/remove resources on addition/removalBenjamin Tissoires
wacom_remote_status_irq() sends information of addition/removal of EKR. We want to allocate one input node per remote, so better having this in a separate worker, not handled in the IRQ directly. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-08-05HID: wacom: leds: dynamically allocate LED groupsBenjamin Tissoires
We need to add an action to ensure wacom->led.groups is null when wacom_led_control() gets called after the resources has been freed. This also prevents to send a LED command when there is no support from the device. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-08-05HID: wacom: convert LEDs to devresBenjamin Tissoires
Use our own wacom_devm_sysfs_create_group() as there is currently no generic one. It has been requested at least twice [1][2] but has been always rejected. However, in the Wacom case, for the wirelessly connected devices, we need to be able to release the created sysfs files without removing the parent kobject. [1] https://patchwork.kernel.org/patch/7526551/ [2] https://lkml.org/lkml/2013/3/14/728 Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-08-05HID: wacom: put the managed resources in a groupBenjamin Tissoires
We currently have a complex clean_inputs() function while this can be handled all by devres. Set a group that we can destroy in wireless_work(). Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-08-05HID: wacom: use one work queue per taskBenjamin Tissoires
Looks like the battery hijacked the wireless worker. That's not fair so use a work queue per task. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-08-28HID: wacom: Add support for Express Key Remote.Aaron Skomra
This device is pad (buttons) only, there is no stylus or touch. Up to five remotes can pair with the device's associated USB dongle. Signed-off-by: Aaron Skomra <aaron.skomra@wacom.com> Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-06-18HID: wacom: Split apart 'wacom_setup_pentouch_input_capabilites'Jason Gerecke
This splits the 'wacom_setup_pentouch_input_capabilites' function into pieces dedicated to doing setup for just the pen interface and just the touch interface. This makes it easier to focus on the relevant piece when making changes. This patch introduces no functional changes. Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-04-23HID: wacom: move all quirks to wacom_setup_device_quirksPing Cheng
It makes probe routine easy to follow. Signed-off-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-04-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: - quite a few firmware fixes for RMI driver by Andrew Duggan - huion and uclogic drivers have been substantially overlaping in functionality laterly. This redundancy is fixed by hid-huion driver being merged into hid-uclogic; work done by Benjamin Tissoires and Nikolai Kondrashov - i2c-hid now supports ACPI GPIO interrupts; patch from Mika Westerberg - Some of the quirks, that got separated into individual drivers, have historically had EXPERT dependency. As HID subsystem matured (as well as the individual drivers), this made less and less sense. This dependency is now being removed by patch from Jean Delvare - Logitech lg4ff driver received a couple of improvements for mode switching, by Michal Malý - multitouch driver now supports clickpads, patches by Benjamin Tissoires and Seth Forshee - hid-sensor framework received a substantial update; namely support for Custom and Generic pages is being added; work done by Srinivas Pandruvada - wacom driver received substantial update; it now supports i2c-conntected devices (Mika Westerberg), Bamboo PADs are now properly supported (Benjamin Tissoires), much improved battery reporting (Jason Gerecke) and pen proximity cleanups (Ping Cheng) - small assorted fixes and device ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (68 commits) HID: sensor: Update document for custom sensor HID: sensor: Custom and Generic sensor support HID: debug: fix error handling in hid_debug_events_read() Input - mt: Fix input_mt_get_slot_by_key HID: logitech-hidpp: fix error return code HID: wacom: Add support for Cintiq 13HD Touch HID: logitech-hidpp: add a module parameter to keep firmware gestures HID: usbhid: yet another mouse with ALWAYS_POLL HID: usbhid: more mice with ALWAYS_POLL HID: wacom: set stylus_in_proximity before checking touch_down HID: wacom: use wacom_wac_finger_count_touches to set touch_down HID: wacom: remove hardcoded WACOM_QUIRK_MULTI_INPUT HID: pidff: effect can't be NULL HID: add quirk for PIXART OEM mouse used by HP HID: add HP OEM mouse to quirk ALWAYS_POLL HID: wacom: ask for a in-prox report when it was missed HID: hid-sensor-hub: Fix sparse warning HID: hid-sensor-hub: fix attribute read for logical usage id HID: plantronics: fix Kconfig default HID: pidff: support more than one concurrent effect ...
2015-03-13power_supply: Change ownership from driver to coreKrzysztof Kozlowski
Change the ownership of power_supply structure from each driver implementing the class to the power supply core. The patch changes power_supply_register() function thus all drivers implementing power supply class are adjusted. Each driver provides the implementation of power supply. However it should not be the owner of power supply class instance because it is exposed by core to other subsystems with power_supply_get_by_name(). These other subsystems have no knowledge when the driver will unregister the power supply. This leads to several issues when driver is unbound - mostly because user of power supply accesses freed memory. Instead let the core own the instance of struct 'power_supply'. Other users of this power supply will still access valid memory because it will be freed when device reference count reaches 0. Currently this means "it will leak" but power_supply_put() call in next patches will solve it. This solves invalid memory references in following race condition scenario: Thread 1: charger manager Thread 2: power supply driver, used by charger manager THREAD 1 (charger manager) THREAD 2 (power supply driver) ========================== ============================== psy = power_supply_get_by_name() Driver unbind, .remove power_supply_unregister() Device fully removed psy->get_property() The 'get_property' call is executed in invalid context because the driver was unbound and struct 'power_supply' memory was freed. This could be observed easily with charger manager driver (here compiled with max17040 fuel gauge): $ cat /sys/devices/virtual/power_supply/cm-battery/capacity & $ echo "1-0036" > /sys/bus/i2c/drivers/max17040/unbind [ 55.725123] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 55.732584] pgd = d98d4000 [ 55.734060] [00000000] *pgd=5afa2831, *pte=00000000, *ppte=00000000 [ 55.740318] Internal error: Oops: 80000007 [#1] PREEMPT SMP ARM [ 55.746210] Modules linked in: [ 55.749259] CPU: 1 PID: 2936 Comm: cat Tainted: G W 3.19.0-rc1-next-20141226-00048-gf79f475f3c44-dirty #1496 [ 55.760190] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 55.766270] task: d9b76f00 ti: daf54000 task.ti: daf54000 [ 55.771647] PC is at 0x0 [ 55.774182] LR is at charger_get_property+0x2f4/0x36c [ 55.779201] pc : [<00000000>] lr : [<c034b0b4>] psr: 60000013 [ 55.779201] sp : daf55e90 ip : 00000003 fp : 00000000 [ 55.790657] r10: 00000000 r9 : c06e2878 r8 : d9b26c68 [ 55.795865] r7 : dad81610 r6 : daec7410 r5 : daf55ebc r4 : 00000000 [ 55.802367] r3 : 00000000 r2 : daf55ebc r1 : 0000002a r0 : d9b26c68 [ 55.808879] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 55.815994] Control: 10c5387d Table: 598d406a DAC: 00000015 [ 55.821723] Process cat (pid: 2936, stack limit = 0xdaf54210) [ 55.827451] Stack: (0xdaf55e90 to 0xdaf56000) [ 55.831795] 5e80: 60000013 c01459c4 0000002a c06f8ef8 [ 55.839956] 5ea0: db651000 c06f8ef8 daebac00 c04cb668 daebac08 c0346864 00000000 c01459c4 [ 55.848115] 5ec0: d99eaa80 c06f8ef8 00000fff 00001000 db651000 c027f25c c027f240 d99eaa80 [ 55.856274] 5ee0: d9a06c00 c0146218 daf55f18 00001000 d99eaa80 db4c18c0 00000001 00000001 [ 55.864468] 5f00: daf55f80 c0144c78 c0144c54 c0107f90 00015000 d99eaab0 00000000 00000000 [ 55.872603] 5f20: 000051c7 00000000 db4c18c0 c04a9370 00015000 00001000 daf55f80 00001000 [ 55.880763] 5f40: daf54000 00015000 00000000 c00e53dc db4c18c0 c00e548c 0000000d 00008124 [ 55.888937] 5f60: 00000001 00000000 00000000 db4c18c0 db4c18c0 00001000 00015000 c00e5550 [ 55.897099] 5f80: 00000000 00000000 00001000 00001000 00015000 00000003 00000003 c000f364 [ 55.905239] 5fa0: 00000000 c000f1a0 00001000 00015000 00000003 00015000 00001000 0001333c [ 55.913399] 5fc0: 00001000 00015000 00000003 00000003 00000002 00000000 00000000 00000000 [ 55.921560] 5fe0: 7fffe000 be999850 0000a225 b6f3c19c 60000010 00000003 00000000 00000000 [ 55.929744] [<c034b0b4>] (charger_get_property) from [<c0346864>] (power_supply_show_property+0x48/0x20c) [ 55.939286] [<c0346864>] (power_supply_show_property) from [<c027f25c>] (dev_attr_show+0x1c/0x48) [ 55.948130] [<c027f25c>] (dev_attr_show) from [<c0146218>] (sysfs_kf_seq_show+0x84/0x104) [ 55.956298] [<c0146218>] (sysfs_kf_seq_show) from [<c0144c78>] (kernfs_seq_show+0x24/0x28) [ 55.964536] [<c0144c78>] (kernfs_seq_show) from [<c0107f90>] (seq_read+0x1b0/0x484) [ 55.972172] [<c0107f90>] (seq_read) from [<c00e53dc>] (__vfs_read+0x18/0x4c) [ 55.979188] [<c00e53dc>] (__vfs_read) from [<c00e548c>] (vfs_read+0x7c/0x100) [ 55.986304] [<c00e548c>] (vfs_read) from [<c00e5550>] (SyS_read+0x40/0x8c) [ 55.993164] [<c00e5550>] (SyS_read) from [<c000f1a0>] (ret_fast_syscall+0x0/0x48) [ 56.000626] Code: bad PC value [ 56.011652] ---[ end trace 7b64343fbdae8ef1 ]--- Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> [for the nvec part] Reviewed-by: Marc Dietrich <marvin24@gmx.de> [for compal-laptop.c] Acked-by: Darren Hart <dvhart@linux.intel.com> [for the mfd part] Acked-by: Lee Jones <lee.jones@linaro.org> [for the hid part] Acked-by: Jiri Kosina <jkosina@suse.cz> [for the acpi part] Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-03-11HID: wacom: Allow dynamic battery creation/destructionJason Gerecke
Tablets like the Intuos, Intuos Pro, and Bamboo have a connector for an optional wireless module that can be connected on the fly. The presence (or absence) of this module is indicated in a status report recieved from the tablet. This patch adds a workqueue function that will create or destroy a power_supply object at runtime to match the current state of the WACOM_QUIRK_BATTERY flag. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-11HID: wacom: Centralize updating of wacom_wac battery statusJason Gerecke
Has the 'wacom_notify_battery' function take on the job of detecting if updating the power supply is necessary to remove multiple nearly-identical 'if' blocks. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-20HID: wacom - Bamboo pen-only tablet does not support PADPing Cheng
Bamboo models do not support HID_DG_CONTACTMAX. Plus, Bamboo pen-only has touch descriptor. This leads to some complications in the code. This patch also fixes duplicated PAD interfeaces for Intuos Pen models. Signed-off-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-01HID: wacom: implement generic HID handling for pen generic devicesBenjamin Tissoires
ISDv4 and v5 are plain HID devices. We can directly implement a generic HID parsing/handling and remove the need to manually add those PID in the list of supported devices. This patch implements the pen support only. The finger part will come in a later patch. To be properly notified of an .event() and a .report(), we need to force hid-core to go through the HID parsing. By default, wacom.ko binds only hidraw, so the hid parsing is not done by hid-core. When a true HID device is there, we add the flag HID_CLAIMED_DRIVER to hid->claimed which will force hid-core to parse the incoming reports. (Note that this can be easily backported by directly setting the .claimed flag to HID_CLAIMED_DRIVER even if hid-core does not support HID_CONNECT_DRIVER) Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-06Input: wacom - only register once the MODULE_* macrosBenjamin Tissoires
Putting the various MODULE_* makes them appear several times in modinfo because wacom.h is used both in wacom_sys.c and wacom_wac.h. Having the macros near the module declaration makes them appear only once. Add also MODULE_VERSION(DRIVER_VERSION) to export the current version number. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-06Input: wacom - add copyright note and bump version to 2.0Benjamin Tissoires
Reviewed-by: Ping Cheng <pingc@wacom.com> Tested-by: Przemo Firszt <przemo@firszt.eu> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25Input: wacom - register an ac power supply for wireless devicesBenjamin Tissoires
This is used by HID Bluetooth devices but also add some more information to the USB Wireless Receiver. We are just porting the bits from hid-wacom.c to the common driver here. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Przemo Firszt <przemo@firszt.eu> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25Input: wacom - enhance Wireless Receiver battery reportingBenjamin Tissoires
- Reports the current status of the battery (discharging, charging, full). - Also notify the upower daemon when there is a change in the battery value. - keep the battery value as a percentage, not the raw value - add WACOM_QUIRK_BATTERY to easily add a battery to a device (required for Bluetooth devices) Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Przemo Firszt <przemo@firszt.eu> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25Input: wacom - put a flag when the led are initializedBenjamin Tissoires
This solves a bug with the wireless receiver: - at plug, the wireless receiver does not know which Wacom device it is connected to, so it does not actually creates all the LEDs - when the tablet connects, wacom->wacom_wac.features.type is set to the proper device so that wacom_wac can understand the packets - when the receiver is unplugged, it detects that a LED should have been created (based on wacom->wacom_wac.features.type) and tries to remove it: crash when removing the sysfs group. Side effect, we can now safely call several times wacom_destroy_leds(). Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25Input: wacom - move the USB (now hid) Wacom driver in drivers/hidBenjamin Tissoires
wacom.ko is now a full HID driver, we have to move it into the proper subdirectory: drivers/hid. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>