summaryrefslogtreecommitdiff
path: root/drivers/hid
AgeCommit message (Collapse)Author
2019-01-28HID: elan: Make array buf static, shrinks object sizeColin Ian King
Don't populate the array buf on the stack but instead make it static. Makes the object code smaller by 43 bytes: Before: text data bss dec hex filename 7769 1520 0 9289 2449 drivers/hid/hid-elan.o After: text data bss dec hex filename 7662 1584 0 9246 241e drivers/hid/hid-elan.o (gcc version 8.2.0 x86_64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-01-24HID: intel-ish-hid: Switch to use new generic UUID APIAndy Shevchenko
There are new types and helpers that are supposed to be used in new code. As a preparation to get rid of legacy types and API functions do the conversion here. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-01-24HID: intel-ish: ipc: handle PIMR before ish_wakeup also clear PISR ↵Song Hongyan
busy_clear bit Host driver should handle interrupt mask register earlier than wake up ish FW else there will be conditions when FW interrupt comes, host PIMR register still not set ready, so move the interrupt mask setting before ish_wakeup. Clear PISR busy_clear bit in ish_irq_handler. If not clear, there will be conditions host driver received a busy_clear interrupt (before the busy_clear mask bit is ready), it will return IRQ_NONE after check_generated_interrupt, the interrupt will never be cleared, causing the DEVICE not sending following IRQ. Since PISR clear should not be called for the CHV device we do this change. After the change, both ISH2HOST interrupt and busy_clear interrupt will be considered as interrupt from ISH, busy_clear interrupt will return IRQ_HANDLED from IPC_IS_BUSY check. Signed-off-by: Song Hongyan <hongyan.song@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-01-21HID: i2c-hid: Ignore input report if there's no data present on Elan touchpanelsKai-Heng Feng
While using Elan touchpads, the message floods: [ 136.138487] i2c_hid i2c-DELL08D6:00: i2c_hid_get_input: incomplete report (14/65535) Though the message flood is annoying, the device it self works without any issue. I suspect that the device in question takes too much time to pull the IRQ back to high after I2C host has done reading its data. Since the host receives all useful data, let's ignore the input report when there's no data. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-01-16HID: core: simplify active collection trackingPhilipp Zabel
Manually tracking an active collection to set collection parents is not necessary, we just have to look one step back into the collection stack to find the correct parent. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-01-14Support for Maltron L90 keyboard media keysWilliam Whistler
The USB report descriptor sent by the Maltron L90 keyboard is invalid, causing the media key reports not to be accepted. This patch adds a driver which uses a report fixup to replace the descriptor. Signed-off-by: William Whistler <wtbw@wtbw.co.uk> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-01-14HID: i2c-hid: Disable runtime PM on Goodix touchpadKai-Heng Feng
A Goodix touchpad doesn't work. Touching the touchpad can trigger IRQ but there's no input event from HID subsystem. Turns out it reports some invalid data: [ 22.136630] i2c_hid i2c-DELL091F:00: input: 0b 00 01 00 00 00 00 00 00 00 00 After some trial and error, it's another device that doesn't work well with ON/SLEEP commands. Disable runtime PM to fix the issue. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-01-10HID: core: replace the collection tree pointers with indicesPeter Hutterer
Previously, the pointer to the parent collection was stored. If a device exceeds 16 collections (HID_DEFAULT_NUM_COLLECTIONS), the array to store the collections is reallocated, the pointer to the parent collection becomes invalid. Replace the pointers with an index-based lookup into the collections array. Fixes: c53431eb696f3c ("HID: core: store the collections as a basic tree") Reported-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Tested-by: Kyle Pelton <kyle.d.pelton@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-01-09HID: sony: Fix SHANWAN PS3 GamePad rumble and led settings supportHongye Yuan
Rumble support on SHANWAN PS3 gamepad is not working when a user program has asked it to. If a HID Output Reports is sent via Control Channel then it will be discard by gamepad, thus rumble motor and led settings in Output Report are ignored. This patch therefore sends HID Output Report via Interrupt Channel to SHANWAN gamepad instead of Control Channel, fixing rumble motor and led settings. Signed-off-by: Hongye Yuan <outmatch@gmail.com> Reviewed-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-01-09HID: sony: Transform one-time SHANWAN check into quirkHongye Yuan
Transform the one-time check for a SHANWAN PS3 clone gamepad into a quirk, to avoid doing the same string comparison in multiple places. Signed-off-by: Hongye Yuan <outmatch@gmail.com> Reviewed-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2019-01-05Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Jiri Kosina: - high-resolution scrolling support that gracefully handles differences between MS and Logitech implementations in HW, from Peter Hutterer and Harry Cutts - MSI IRQ support for intel-ish driver, from Song Hongyan - support for new hardware (Cougar 700K, Odys Winbook 13, ASUS FX503VD, ASUS T101HA) from Daniel M. Lambea, Hans de Goede and Aleix Roca Nonell - other small assorted fixups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (22 commits) HID: i2c-hid: Add Odys Winbook 13 to descriptor override HID: lenovo: Add checks to fix of_led_classdev_register HID: intel-ish-hid: add MSI interrupt support HID: debug: Change to use DEFINE_SHOW_ATTRIBUTE macro HID: doc: fix wrong data structure reference for UHID_OUTPUT HID: intel-ish-hid: fixes incorrect error handling HID: asus: Add support for the ASUS T101HA keyboard dock HID: logitech: Use LDJ_DEVICE macro for existing Logitech mice HID: logitech: Enable high-resolution scrolling on Logitech mice HID: logitech: Add function to enable HID++ 1.0 "scrolling acceleration" HID: logitech-hidpp: fix typo, hiddpp to hidpp HID: input: use the Resolution Multiplier for high-resolution scrolling HID: core: process the Resolution Multiplier HID: core: store the collections as a basic tree Input: add `REL_WHEEL_HI_RES` and `REL_HWHEEL_HI_RES` HID: input: support Microsoft wireless radio control hotkey HID: use macros in IS_INPUT_APPLICATION HID: asus: Add support for the ASUS FX503VD laptop HID: asus: Add event handler to catch unmapped Asus Vendor UsagePage codes HID: cougar: Add support for Cougar 700K Gaming Keyboard ...
2019-01-03Merge branches 'for-4.20/upstream-fixes', 'for-4.21/core', ↵Jiri Kosina
'for-4.21/hid-asus', 'for-4.21/hid-core', 'for-4.21/hid-cougar', 'for-4.21/hidraw', 'for-4.21/highres-wheel' and 'for-4.21/ish' into for-linus
2019-01-03HID: i2c-hid: Add Odys Winbook 13 to descriptor overrideHans de Goede
The Odys Winbook 13 uses a SIPODEV SP1064 touchpad, which does not supply descriptors, add this to the DMI descriptor override list, fixing the touchpad not working. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1526312 Reported-by: Rene Wagner <redhatbugzilla@callerid.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-01-03HID: lenovo: Add checks to fix of_led_classdev_registerAditya Pakki
In lenovo_probe_tpkbd(), the function of_led_classdev_register() could return an error value that is unchecked. The fix adds these checks. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-12-28Merge tag 'gpio-v4.21-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.21 kernel series. Core changes: - Some core changes are already in outside of this pull request as they came through the regulator tree, most notably devm_gpiod_unhinge() that removes devres refcount management from a GPIO descriptor. This is needed in subsystems such as regulators where the regulator core need to take over the reference counting and lifecycle management for a GPIO descriptor. - We dropped devm_gpiochip_remove() and devm_gpio_chip_match() as nothing needs it. We can bring it back if need be. - Add a global TODO so people see where we are going. This helps setting the direction now that we are two GPIO maintainers. - Handle the MMC CD/WP properties in the device tree core. (The bulk of patches activating this code is already merged through the MMC/SD tree.) - Augment gpiochip_request_own_desc() to pass a flag so we as gpiochips can request lines as active low or open drain etc even from ourselves. New drivers: - New driver for Cadence GPIO blocks. - New driver for Atmel SAMA5D2 PIOBU GPIO lines. Driver improvements: - A major refactoring of the PCA953x driver - this driver has been around for ages, and is now modernized to reduce code duplication that has stacked up and is using regmap to read write and cache registers. - Intel drivers are now maintained in a separate tree and start with a round of cleanups and unifications" * tag 'gpio-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (99 commits) gpio: sama5d2-piobu: Depend on OF_GPIO gpio: Add Cadence GPIO driver dt-bindings: gpio: Add bindings for Cadence GPIO gpiolib-acpi: remove unused variable 'err', cleans up build warning gpio: mxs: read pin level directly instead of using .get gpio: aspeed: remove duplicated statement gpio: add driver for SAMA5D2 PIOBU pins dt-bindings: arm: atmel: describe SECUMOD usage as a GPIO controller gpio/mmc/of: Respect polarity in the device tree dt-bindings: gpio: rcar: Add r8a774c0 (RZ/G2E) support memory: omap-gpmc: Get the header of the enum ARM: omap1: Fix new user of gpiochip_request_own_desc() gpio: pca953x: Add regmap dependency for PCA953x driver gpio: raspberrypi-exp: decrease refcount on firmware dt node gpiolib: Fix return value of gpio_to_desc() stub if !GPIOLIB gpio: pca953x: Restore registers after suspend/resume cycle gpio: pca953x: Zap single use of pca953x_read_single() gpio: pca953x: Zap ad-hoc reg_output cache gpio: pca953x: Zap ad-hoc reg_direction cache gpio: pca953x: Perform basic regmap conversion ...
2018-12-19HID: intel-ish-hid: add MSI interrupt supportSong Hongyan
Now ish hid ipc only support sideband interrupt but on some platforms they use MSI interrupt. In order to make the interrupt type coverage all the scenario add single MSI interrupt support, it can match all interrupt types. Signed-off-by: Song Hongyan <hongyan.song@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-12-19HID: debug: Change to use DEFINE_SHOW_ATTRIBUTE macroYangtao Li
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-12-17HID: intel-ish-hid: fixes incorrect error handlingPan Bian
The memory chunk allocated by hid_allocate_device() should be released by hid_destroy_device(), not kfree(). Fixes: 0b28cb4bcb1("HID: intel-ish-hid: ISH HID client driver") Signed-off-by: Pan Bian <bianpan2016@163.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-12-17HID: asus: Add support for the ASUS T101HA keyboard dockAleix Roca Nonell
The ASUS T101HA keyboard dock generates HID events using the ASUS vendor specific UsagePage 0xff31. In consequence, some multimedia keys such as brightness up and down are not working with hid-generic. This commit adds the T101HA dock into the supported device list of the hid-asus driver. It also prevents the dock's integrated touchpad to be bound with hid-asus given that it is already working fine with hid-multitouch. Signed-off-by: Aleix Roca Nonell <kernelrocks@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2018-12-14gpio: Pass a flag to gpiochip_request_own_desc()Linus Walleij
Before things go out of hand, make it possible to pass flags when requesting "own" descriptors from a gpio_chip. This is necessary if the chip wants to request a GPIO with active low semantics, for example. Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Roger Quadros <rogerq@ti.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-12-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID subsystem fixes from Jiri Kosina: - two device-specific quirks from Hans de Goede and Nic Soudée - reintroduction of (mistakenly remocved) ABS_RESERVED from Peter Hutterer * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: Input: restore EV_ABS ABS_RESERVED HID: quirks: fix RetroUSB.com devices HID: ite: Add USB id match for another ITE based keyboard rfkill key quirk
2018-12-07HID: logitech: Use LDJ_DEVICE macro for existing Logitech miceHarry Cutts
Signed-off-by: Harry Cutts <hcutts@chromium.org> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Verified-by: Harry Cutts <hcutts@chromium.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2018-12-07HID: logitech: Enable high-resolution scrolling on Logitech miceHarry Cutts
There are three features used by various Logitech mice for high-resolution scrolling: the scrolling acceleration bit in HID++ 1.0, and the x2120 and x2121 features in HID++ 2.0 and above. This patch supports all three, and uses the multiplier reported by the mouse for the HID++ 2.0+ features. The full list of product IDs of mice which support high-resolution scrolling was provided by Logitech, but the patch was tested using the following mice (using the Unifying receiver): * HID++ 1.0: Anywhere MX, Performance MX * x2120: M560 * x2121: MX Anywhere 2, MX Master 2S This patch is a combinations of the now-reverted commits 1ff2e1a44e0, d56ca9855bf9, 5fe2ccbef9d, 044ee89028 together with some extra bits for the directional and timeout-based reset. The previous patch series was in hid-input, it appears this remainder handling is logitech-specific and was moved to hid-logitech-hidpp.c and renamed accordingly. Signed-off-by: Harry Cutts <hcutts@chromium.org> Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Verified-by: Harry Cutts <hcutts@chromium.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2018-12-07HID: logitech: Add function to enable HID++ 1.0 "scrolling acceleration"Harry Cutts
"Scrolling acceleration" is a bit of a misnomer: it doesn't deal with acceleration at all. However, that's the name used in Logitech's spec, so I used it here. Signed-off-by: Harry Cutts <hcutts@chromium.org> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Verified-by: Harry Cutts <hcutts@chromium.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2018-12-07HID: logitech-hidpp: fix typo, hiddpp to hidppPeter Hutterer
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Verified-by: Harry Cutts <hcutts@chromium.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2018-12-07HID: input: use the Resolution Multiplier for high-resolution scrollingPeter Hutterer
Windows uses a magic number of 120 for a wheel click. High-resolution scroll wheels are supposed to use a fraction of 120 to signal smaller scroll steps. This is implemented by the Resolution Multiplier in the device itself. If the multiplier is present in the report descriptor, set it to the logical max and then use the resolution multiplier to calculate the high-resolution events. This is the recommendation by Microsoft, see http://msdn.microsoft.com/en-us/windows/hardware/gg487477.aspx Note that all mice encountered so far have a logical min/max of 0/1, so it's a binary "yes or no" to high-res scrolling anyway. To make userspace simpler, always enable the REL_WHEEL_HI_RES bit. Where the device doesn't support high-resolution scrolling, the value for the high-res data will simply be a multiple of 120 every time. For userspace, if REL_WHEEL_HI_RES is available that is the one to be used. Potential side-effect: a device with a Resolution Multiplier applying to other Input items will have those items set to the logical max as well. This cannot easily be worked around but it is doubtful such devices exist. Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Verified-by: Harry Cutts <hcutts@chromium.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2018-12-07HID: core: process the Resolution MultiplierPeter Hutterer
The Resolution Multiplier is a feature report that modifies the value of Usages within the same Logical Collection. If the multiplier is set to anything but 1, the hardware reports (value * multiplier) for the same amount of physical movement, i.e. the value we receive in the kernel is pre-multiplied. The hardware may either send a single (value * multiplier), or by sending multiplier as many reports with the same value, or a combination of these two options. For example, when the Microsoft Sculpt Ergonomic mouse Resolution Multiplier is set to 12, the Wheel sends out 12 for every detent but AC Pan sends out a value of 3 at 4 times the frequency. The effective multiplier is based on the physical min/max of the multiplier field, a logical min/max of [0,1] with a physical min/max of [1,8] means the multiplier is either 1 or 8. The Resolution Multiplier was introduced for high-resolution scrolling in Windows Vista and is commonly used on Microsoft mice. The recommendation for the Resolution Multiplier is to default to 1 for backwards compatibility. This patch adds an arbitrary upper limit at 255. The only known use case for the Resolution Multiplier is for scroll wheels where the multiplier has to be a fraction of 120 to work with Windows. Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Verified-by: Harry Cutts <hcutts@chromium.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2018-12-07HID: core: store the collections as a basic treePeter Hutterer
For each collection parsed, store a pointer to the parent collection (if any). This makes it a lot easier to look up which collection(s) any given item is part of Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Verified-by: Harry Cutts <hcutts@chromium.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2018-12-07HID: quirks: fix RetroUSB.com devicesNic Soudée
SNES RetroPort and RetroPad register only 4 gamepad buttons when they should register all 8 buttons. This is described here: https://ask.fedoraproject.org/en/question/128102 This is happening because of: Commit 190d7f02ce8e ("HID: input: do not increment usages when duplicate is found") Here, I add the quirk HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE (created for backward compatibility with the change in 190d7f02ce8e) for the two products. Tested with both RetroPort and RetroPad. Cc: stable@vger.kernel.org # v4.18+ Signed-off-by: Nic Soudée <nsoudee@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2018-12-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Mostly new IDs for Elan/Synaptics touchpads, plus a few small fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: omap-keypad - fix keyboard debounce configuration Input: xpad - quirk all PDP Xbox One gamepads Input: synaptics - enable SMBus for HP 15-ay000 Input: synaptics - add PNP ID for ThinkPad P50 to SMBus Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15ARR Input: elan_i2c - add support for ELAN0621 touchpad Input: hyper-v - fix wakeup from suspend-to-idle Input: atkbd - clean up indentation issue Input: st1232 - convert to SPDX identifiers Input: migor_ts - convert to SPDX identifiers Input: dt-bindings - fix a typo in file input-reset.txt Input: cros_ec_keyb - fix button/switch capability reports Input: elan_i2c - add ELAN0620 to the ACPI table Input: matrix_keypad - check for errors from of_get_named_gpio()
2018-11-30Merge tag 'staging-4.20-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO driver fixes from Greg KH: "Here are some small IIO and staging driver fixes for 4.20-rc5. Nothing major, the IIO fix ended up touching the HID drivers at the same time, but the HID maintainer acked it. The staging fixes are all minor patches for reported issues and regressions, full details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'staging-4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers staging: vchiq_arm: fix compat VCHIQ_IOC_AWAIT_COMPLETION staging: mt7621-pinctrl: fix uninitialized variable ngroups staging: rtl8723bs: Add missing return for cfg80211_rtw_get_station staging: most: use format specifier "%s" in snprintf staging: rtl8723bs: Fix incorrect sense of ether_addr_equal staging: mt7621-dma: fix potentially dereferencing uninitialized 'tx_desc' staging: comedi: clarify/unify macros for NI macro-defined terminals drivers: staging: cedrus: find ctx before dereferencing it ctx staging: rtl8723bs: Fix the return value in case of error in 'rtw_wx_read32()' staging: comedi: ni_mio_common: scale ao INSN_CONFIG_GET_CMD_TIMING_CONSTRAINTS iio:st_magn: Fix enable device after trigger
2018-11-30HID: asus: Add support for the ASUS FX503VD laptopHans de Goede
The ASUS FX503VD laptop uses an USB keyboard with several hotkeys which use the Asus Vendor specific UsagePage. This uses two usage-codes within the page which have not been seen before, 0x7c for its mic-mute hotkey and 0x99 for Fn+F5 which has a "fan" symbol as hotkey symbol on the keyb. we map this to KEY_PROG4 (PROG1-PROG3 are already used). This commit adds the mappings for the 2 new usage codes and the USB-ids for this keyboard to the hid-asus driver. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2018-11-30HID: asus: Add event handler to catch unmapped Asus Vendor UsagePage codesHans de Goede
Various Asus devices generate HID events using the Asus Vendor specific UsagePage 0xff31 and hid-asus will map these in its input_mapping for all devices to which it binds (independent of any quirks). Add an event callback which check for unmapped (because sofar unknown) usages within the Asus Vendor UsagePage and log a warning for these. The purpose of this patch is to help debugging / find such unmapped codes and add them to the asus_input_mapping() function. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2018-11-30HID: ite: Add USB id match for another ITE based keyboard rfkill key quirkHans de Goede
The 258a:6a88 keyboard-dock shipped with the Prowise PT301 tablet is likely another ITE based design. The controller die is directly bonded to the PCB with a blob of black glue on top so there are no markings and the 258a vendor-id used is unknown anywhere. But the keyboard has the exact same hotkeys mapped to Fn+F1 - F10 as the other ITE8595 keyboard I have *and* it has the same quirky behavior wrt the rfkill hotkey. Either way as said this keyboard has the same quirk for its rfkill / airplane mode hotkey as the ITE 8595 chip, it only sends a single release event when pressed and released, it never sends a press event. This commit adds the 258a:6a88 USB id to the hid-ite id-table, fixing the rfkill key not working on this keyboard. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2018-11-22Merge tag 'iio-fixes-for-4.20a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First set of IIO fixes for the 4.20 cycle. * st_magn - Avoid an ordering issue that lead to large numbers of unhandled interrupts whilst enabling buffered capture. * hid-sensors - Fix a long running problem with signed values reading wrong from sysfs on these sensors. It appears people were only using the buffered interface. These typically occur in laptops so chances are everyone was using the sensor-proxy which will use the buffered interface by default. * tag 'iio-fixes-for-4.20a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers iio:st_magn: Fix enable device after trigger
2018-11-22Revert "HID: input: Create a utility class for counting scroll events"Benjamin Tissoires
This reverts commit 1ff2e1a44e02d4bdbb9be67c7d9acc240a67141f. It turns out the current API is not that compatible with some Microsoft mice, so better start again from scratch. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Harry Cutts <hcutts@chromium.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz>
2018-11-22Revert "HID: logitech: Add function to enable HID++ 1.0 "scrolling ↵Benjamin Tissoires
acceleration"" This reverts commit 051dc9b0579602bd63e9df74d0879b5293e71581. It turns out the current API is not that compatible with some Microsoft mice, so better start again from scratch. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Harry Cutts <hcutts@chromium.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz>
2018-11-22Revert "HID: logitech: Enable high-resolution scrolling on Logitech mice"Benjamin Tissoires
This reverts commit d56ca9855bf924f3bc9807a3e42f38539df3f41f. It turns out the current API is not that compatible with some Microsoft mice, so better start again from scratch. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Harry Cutts <hcutts@chromium.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz>
2018-11-22Revert "HID: logitech: Use LDJ_DEVICE macro for existing Logitech mice"Benjamin Tissoires
This reverts commit 3fe1d6bbcd16f384d2c7dab2caf8e4b2df9ea7e6. It turns out the current API is not that compatible with some Microsoft mice, so better start again from scratch. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Harry Cutts <hcutts@chromium.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz>
2018-11-22Revert "HID: logitech: fix a used uninitialized GCC warning"Benjamin Tissoires
This reverts commit 5fe2ccbef9d7aecf5c4402c753444f1a12096cfd. It turns out the current API is not that compatible with some Microsoft mice, so better start again from scratch. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Harry Cutts <hcutts@chromium.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz>
2018-11-22Revert "HID: input: simplify/fix high-res scroll event handling"Benjamin Tissoires
This reverts commit 044ee890286153a1aefb40cb8b6659921aecb38b. It turns out the current API is not that compatible with some Microsoft mice, so better start again from scratch. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Harry Cutts <hcutts@chromium.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz>
2018-11-21HID: cougar: Add support for Cougar 700K Gaming KeyboardDaniel M. Lambea
Add USB ID 060b:700a to the list of valid USB IDS for the cougar hid driver. Signed-off-by: Daniel M. Lambea <dmlambea@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2018-11-20HID: Add quirk for Primax PIXART OEM miceSebastian Parschauer
The PixArt OEM mice are known for disconnecting every minute in runlevel 1 or 3 if they are not always polled. So add quirk ALWAYS_POLL for two Primax mice as well. 0x4e22 is the Dell MS111-P and 0x4d0f is the unbranded HP Portia mouse HP 697738-001. Both were built until approx. 2014. Those were the standard mice from those vendors and are still around - even as new old stock. Reference: https://github.com/sriemer/fix-linux-mouse/issues/11 Signed-off-by: Sebastian Parschauer <sparschauer@suse.de> CC: stable@vger.kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-11-19HID: i2c-hid: Disable runtime PM for LG touchscreenKai-Heng Feng
LG touchscreen (1fd2:8001) stops working after reboot: [ 4.859153] i2c_hid i2c-SAPS2101:00: i2c_hid_get_input: incomplete report (64/66) [ 4.936070] i2c_hid i2c-SAPS2101:00: i2c_hid_get_input: incomplete report (64/66) [ 9.948224] i2c_hid i2c-SAPS2101:00: failed to reset device. The device in question stops working after receives SLEEP, ON, SLEEP commands in a short period. The scenario is like this: - Once the desktop session closes, it also closed the hid device, so the device gets runtime suspended and receives a SLEEP command. - Before calling shutdown callback, it gets runtime resumed and received an ON command. - In the shutdown callback, it receives another SLEEP command. I failed to find a reliable interval between ON/SLEEP commands that can make it work, so let's simply disable runtime PM for the device. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-11-19HID: multitouch: Add pointstick support for Cirque TouchpadKai-Heng Feng
Cirque Touchpad/Pointstick combo is similar to Alps devices, it requires MT_CLS_WIN_8_DUAL to expose its pointstick as a mouse. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-11-19HID: steam: remove input device when a hid client is running.Rodrigo Rivas Costa
Previously, when a HID client such as the Steam Client was running, this driver disabled its input device to avoid doubling the input events. While it worked mostly fine, some games got confused by the idle gamepad, and switched to two player mode, or asked the user to choose which gamepad to use. Other games just crashed, probably a bug in Unity [1]. With this commit, when a HID client starts, the input device is removed; when the HID client ends the input device is recreated. [1]: https://github.com/ValveSoftware/steam-for-linux/issues/5645 Signed-off-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-11-19Revert "HID: uhid: use strlcpy() instead of strncpy()"David Herrmann
This reverts commit 336fd4f5f25157e9e8bd50e898a1bbcd99eaea46. Please note that `strlcpy()` does *NOT* do what you think it does. strlcpy() *ALWAYS* reads the full input string, regardless of the 'length' parameter. That is, if the input is not zero-terminated, strlcpy() will *READ* beyond input boundaries. It does this, because it always returns the size it *would* copy if the target was big enough, not the truncated size it actually copied. The original code was perfectly fine. The hid device is zero-initialized and the strncpy() functions copied up to n-1 characters. The result is always zero-terminated this way. This is the third time someone tried to replace strncpy with strlcpy in this function, and gets it wrong. I now added a comment that should at least make people reconsider. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-11-19HID: uhid: forbid UHID_CREATE under KERNEL_DS or elevated privilegesEric Biggers
When a UHID_CREATE command is written to the uhid char device, a copy_from_user() is done from a user pointer embedded in the command. When the address limit is KERNEL_DS, e.g. as is the case during sys_sendfile(), this can read from kernel memory. Alternatively, information can be leaked from a setuid binary that is tricked to write to the file descriptor. Therefore, forbid UHID_CREATE in these cases. No other commands in uhid_char_write() are affected by this bug and UHID_CREATE is marked as "obsolete", so apply the restriction to UHID_CREATE only rather than to uhid_char_write() entirely. Thanks to Dmitry Vyukov for adding uhid definitions to syzkaller and to Jann Horn for commit 9da3f2b740544 ("x86/fault: BUG() when uaccess helpers fault on kernel addresses"), allowing this bug to be found. Reported-by: syzbot+72473edc9bf4eb1c6556@syzkaller.appspotmail.com Fixes: d365c6cfd337 ("HID: uhid: add UHID_CREATE and UHID_DESTROY events") Cc: <stable@vger.kernel.org> # v3.6+ Cc: Jann Horn <jannh@google.com> Cc: Andy Lutomirski <luto@kernel.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Jann Horn <jannh@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-11-16iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbersHans de Goede
Before this commit sensor_hub_input_attr_get_raw_value() failed to take the signedness of 16 and 8 bit values into account, returning e.g. 65436 instead of -100 for the z-axis reading of an accelerometer. This commit adds a new is_signed parameter to the function and makes all callers pass the appropriate value for this. While at it, this commit also fixes up some neighboring lines where statements were needlessly split over 2 lines to improve readability. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-11-15Input: hyper-v - fix wakeup from suspend-to-idleVitaly Kuznetsov
It makes little sense but still possible to put Hyper-V guests into suspend-to-idle state. To wake them up two wakeup sources were registered in the past: hyperv-keyboard and hid-hyperv. However, since commit eed4d47efe95 ("ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle") pm_wakeup_event() from these devices is ignored. Switch to pm_wakeup_hard_event() API as these devices are actually the only possible way to wakeup Hyper-V guests. Fixes: eed4d47efe95 (ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle) Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: K. Y. Srinivasan <kys@microsoft.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>