summaryrefslogtreecommitdiff
path: root/drivers/hsi
AgeCommit message (Collapse)Author
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-02-14drivers: hsi: Call cpu_latency_qos_*() instead of pm_qos_*()Rafael J. Wysocki
Call cpu_latency_qos_add/remove_request() and cpu_latency_qos_request_active() instead of pm_qos_add/remove_request() and pm_qos_request_active(), respectively, because the latter are going to be dropped. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Tested-by: Amit Kucheria <amit.kucheria@linaro.org> Acked-by: Sebastian Reichel <sre@kernel.org>
2019-09-22Merge tag 'hsi-for-5.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi Pull HSI updates from Sebastian Reichel: "Misc cleanups" * tag 'hsi-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi: HSI: Remove dev_err() usage after platform_get_irq() HSI: ssi_protocol: Mark expected switch fall-throughs
2019-07-30net: Use skb_frag_off accessorsJonathan Lemon
Use accessor functions for skb fragment's page_offset instead of direct references, in preparation for bvec conversion. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30HSI: Remove dev_err() usage after platform_get_irq()Stephen Boyd
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Sebastian Reichel <sre@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-07-30HSI: ssi_protocol: Mark expected switch fall-throughsGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: arm): drivers/hsi/clients/ssi_protocol.c: In function ‘ssip_set_rxstate’: drivers/hsi/clients/ssi_protocol.c:291:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (atomic_read(&ssi->tx_usecnt)) ^ drivers/hsi/clients/ssi_protocol.c:294:2: note: here case RECEIVING: ^~~~ drivers/hsi/clients/ssi_protocol.c: In function ‘ssip_keep_alive’: drivers/hsi/clients/ssi_protocol.c:466:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if (atomic_read(&ssi->tx_usecnt) == 0) ^ drivers/hsi/clients/ssi_protocol.c:472:3: note: here case SEND_IDLE: ^~~~ Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-07-22net: Use skb accessors in network driversMatthew Wilcox (Oracle)
In preparation for unifying the skb_frag and bio_vec, use the fine accessors which already exist and use skb_frag_t instead of struct skb_frag_struct. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 336Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin st fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 246 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.674189849@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-14HSI: omap_ssi_port: fix debugfs_simple_attr.cocci warningsYueHaibing
Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE for debugfs files. Semantic patch information: Rationale: DEFINE_SIMPLE_ATTRIBUTE + debugfs_create_file() imposes some significant overhead as compared to DEFINE_DEBUGFS_ATTRIBUTE + debugfs_create_file_unsafe(). Generated by: scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-12-05HSI: omap_ssi: Change to use DEFINE_SHOW_ATTRIBUTE macroYangtao Li
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-07-07headers: separate linux/mod_devicetable.h from linux/platform_device.hRandy Dunlap
At over 4000 #includes, <linux/platform_device.h> is the 9th most #included header file in the Linux kernel. It does not need <linux/mod_devicetable.h>, so drop that header and explicitly add <linux/mod_devicetable.h> to source files that need it. 4146 #include <linux/platform_device.h> After this patch, there are 225 files that use <linux/mod_devicetable.h>, for a reduction of around 3900 times that <linux/mod_devicetable.h> does not have to be read & parsed. 225 #include <linux/mod_devicetable.h> This patch was build-tested on 20 different arch-es. It also makes these drivers SubmitChecklist#1 compliant. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kbuild test robot <lkp@intel.com> # drivers/media/platform/vimc/ Reported-by: kbuild test robot <lkp@intel.com> # drivers/pinctrl/pinctrl-u300.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-17hsi: clients: Change return type to vm_fault_tSouptick Joarder
Use new return type vm_fault_t for fault handler. For now, this is just documenting that the function returns a VM_FAULT value rather than an errno. Once all instances are converted, vm_fault_t will become a distinct type. Reference id -> 1c8f422059ae ("mm: change return type to vm_fault_t") Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-03-19HSI: hsi_char: Delete an error message for a failed memory allocation in ↵Markus Elfring
hsc_probe() Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-03-19HSI: ssi_protocol: fix spelling mistake: "trigerred" -> "triggered"Colin Ian King
Trivial fix to spelling mistake in dev_err error message text. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-03-19HSI: ssi_protocol: Delete an error message for a failed memory allocation in ↵Markus Elfring
ssi_protocol_probe() Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-03-19HSI: ssi_protocol: Fix a typo in two comment linesMarkus Elfring
Adjust two words in this description. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-31Merge tag 'hsi-for-4.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi Pull HSI update from Sebastian Reichel: "Y2038 fix for cmt-speech" * tag 'hsi-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi: HSI: cmt_speech: use timespec64 instead of timespec
2017-12-01HSI: cmt_speech: use timespec64 instead of timespecArnd Bergmann
struct timespec should no longer be used because of the y2038 overflow problem. This code does not suffer from the overflow, but it's trivial to change it to use timespec64 without changing the interface, so let's do that. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-11-28the rest of drivers/*: annotate ->poll() instancesAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-15Merge tag 'hsi-for-4.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi Pull HSI updates from Sebastian Reichel: - add HSI OMAP4 bindings - misc small fixes * tag 'hsi-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi: dt-bindings: hsi: add omap4 hsi controller bindings HSI: hsi_char: pr_err() strings should end with newlines HSI: omap_ssi_core: fix kilo to be "k" not "K"
2017-11-13Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "Yet another big pile of changes: - More year 2038 work from Arnd slowly reaching the point where we need to think about the syscalls themself. - A new timer function which allows to conditionally (re)arm a timer only when it's either not running or the new expiry time is sooner than the armed expiry time. This allows to use a single timer for multiple timeout requirements w/o caring about the first expiry time at the call site. - A new NMI safe accessor to clock real time for the printk timestamp work. Can be used by tracing, perf as well if required. - A large number of timer setup conversions from Kees which got collected here because either maintainers requested so or they simply got ignored. As Kees pointed out already there are a few trivial merge conflicts and some redundant commits which was unavoidable due to the size of this conversion effort. - Avoid a redundant iteration in the timer wheel softirq processing. - Provide a mechanism to treat RTC implementations depending on their hardware properties, i.e. don't inflict the write at the 0.5 seconds boundary which originates from the PC CMOS RTC to all RTCs. No functional change as drivers need to be updated separately. - The usual small updates to core code clocksource drivers. Nothing really exciting" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits) timers: Add a function to start/reduce a timer pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday() timer: Prepare to change all DEFINE_TIMER() callbacks netfilter: ipvs: Convert timers to use timer_setup() scsi: qla2xxx: Convert timers to use timer_setup() block/aoe: discover_timer: Convert timers to use timer_setup() ide: Convert timers to use timer_setup() drbd: Convert timers to use timer_setup() mailbox: Convert timers to use timer_setup() crypto: Convert timers to use timer_setup() drivers/pcmcia: omap1: Fix error in automated timer conversion ARM: footbridge: Fix typo in timer conversion drivers/sgi-xp: Convert timers to use timer_setup() drivers/pcmcia: Convert timers to use timer_setup() drivers/memstick: Convert timers to use timer_setup() drivers/macintosh: Convert timers to use timer_setup() hwrng/xgene-rng: Convert timers to use timer_setup() auxdisplay: Convert timers to use timer_setup() sparc/led: Convert timers to use timer_setup() mips: ip22/32: Convert timers to use timer_setup() ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-05timer: Fix two mistakes in callback conversionsKees Cook
Two errors found their way into the timer callback conversions that weren't noticed with x86 allmodconfig. Reported-by: kernel test robot <lkp@01.org> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20171005171035.GA34831@beast
2017-10-05timer: Remove init_timer_deferrable() in favor of timer_setup()Kees Cook
This refactors the only users of init_timer_deferrable() to use the new timer_setup() and from_timer(). Removes definition of init_timer_deferrable(). Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: David S. Miller <davem@davemloft.net> # for networking parts Acked-by: Sebastian Reichel <sre@kernel.org> # for drivers/hsi parts Cc: linux-mips@linux-mips.org Cc: Petr Mladek <pmladek@suse.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: linux1394-devel@lists.sourceforge.net Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: linux-s390@vger.kernel.org Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Ursula Braun <ubraun@linux.vnet.ibm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Harish Patil <harish.patil@cavium.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Manish Chopra <manish.chopra@cavium.com> Cc: Len Brown <len.brown@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-pm@vger.kernel.org Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Julian Wiedmann <jwi@linux.vnet.ibm.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Mark Gross <mark.gross@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: linux-watchdog@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-wireless@vger.kernel.org Cc: Sebastian Reichel <sre@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Michael Reed <mdr@sgi.com> Cc: netdev@vger.kernel.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lkml.kernel.org/r/1507159627-127660-6-git-send-email-keescook@chromium.org
2017-10-01HSI: hsi_char: pr_err() strings should end with newlinesArvind Yadav
pr_err() messages should end with a new-line to avoid other messages being concatenated. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-10-01HSI: omap_ssi_core: fix kilo to be "k" not "K"Pavel Machek
Kilo should be "k" not "K", fix it it comments and messages. Signed-off-by: Pavel Machek <pavel@ucw.cz> index 88e48b3..41a09f5 100644 Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-07-04Merge tag 'hsi-for-4.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi Pull HSI updates from Sebastian Reichel: "Misc cleanups" * tag 'hsi-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi: HSI: core: Use kcalloc() in two functions HSI: Use kcalloc() in hsi_register_board_info() HSI: omap_ssi: Delete an error message for a failed memory allocation in ssi_add_controller() HSI: omap_ssi: Fix a typo in a comment line HSI: omap_ssi: Use devm_kcalloc() in ssi_add_controller() HSI: nokia-modem: Add a space character for better code readability in nokia_modem_probe() HSI: nokia-modem: Delete error messages for a failed memory allocation in two functions HSI: nokia-modem: Use devm_kcalloc() in nokia_modem_gpio_probe()
2017-06-08hsi: Fix build regression due to netdev destructor fix.David S. Miller
> ../drivers/hsi/clients/ssi_protocol.c:1069:5: error: 'struct net_device' has no member named 'destructor' Reported-by: Mark Brown <broonie@kernel.org> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08HSI: core: Use kcalloc() in two functionsMarkus Elfring
Multiplications for the size determination of memory allocations indicated that array data structures should be processed. Thus use the corresponding function "kcalloc". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-06-08HSI: Use kcalloc() in hsi_register_board_info()Markus Elfring
A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "kcalloc". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-06-08HSI: omap_ssi: Delete an error message for a failed memory allocation in ↵Markus Elfring
ssi_add_controller() The script "checkpatch.pl" pointed information out like the following. WARNING: Possible unnecessary 'out of memory' message Thus remove such a statement here. Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdf Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-06-08HSI: omap_ssi: Fix a typo in a comment lineMarkus Elfring
Add a missing character in this description for a function call. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-06-08HSI: omap_ssi: Use devm_kcalloc() in ssi_add_controller()Markus Elfring
* A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "devm_kcalloc". This issue was detected by using the Coccinelle software. * Replace the specification of a data type by a pointer dereference to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-06-08HSI: nokia-modem: Add a space character for better code readability in ↵Markus Elfring
nokia_modem_probe() The script "checkpatch.pl" pointed information out like the following. ERROR: space required before the open parenthesis '(' Thus fix the affected source code place. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-06-08HSI: nokia-modem: Delete error messages for a failed memory allocation in ↵Markus Elfring
two functions The script "checkpatch.pl" pointed information out like the following. WARNING: Possible unnecessary 'out of memory' message Thus remove such statements here. Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdf Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-06-08HSI: nokia-modem: Use devm_kcalloc() in nokia_modem_gpio_probe()Markus Elfring
* A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "devm_kcalloc". This issue was detected by using the Coccinelle software. * Replace the specification of a data structure by a pointer dereference to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-04-21HSI: ssi_protocol: double free in ssip_pn_xmit()Dan Carpenter
If skb_pad() fails then it frees skb and we don't need to free it again at the end of the function. Fixes: dc7bf5d7 ("HSI: Introduce driver for SSI Protocol") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2017-03-02sched/headers: Prepare to move signal wakeup & sigpending methods from ↵Ingo Molnar
<linux/sched.h> into <linux/sched/signal.h> Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-24mm, fs: reduce fault, page_mkwrite, and pfn_mkwrite to take only vmfDave Jiang
->fault(), ->page_mkwrite(), and ->pfn_mkwrite() calls do not need to take a vma and vmf parameter when the vma already resides in vmf. Remove the vma parameter to simplify things. [arnd@arndb.de: fix ARM build] Link: http://lkml.kernel.org/r/20170125223558.1451224-1-arnd@arndb.de Link: http://lkml.kernel.org/r/148521301778.19116.10840599906674778980.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-20net: use core MTU range checking in misc driversJarod Wilson
firewire-net: - set min/max_mtu - remove fwnet_change_mtu nes: - set max_mtu - clean up nes_netdev_change_mtu xpnet: - set min/max_mtu - remove xpnet_dev_change_mtu hippi: - set min/max_mtu - remove hippi_change_mtu batman-adv: - set max_mtu - remove batadv_interface_change_mtu - initialization is a little async, not 100% certain that max_mtu is set in the optimal place, don't have hardware to test with rionet: - set min/max_mtu - remove rionet_change_mtu slip: - set min/max_mtu - streamline sl_change_mtu um/net_kern: - remove pointless ndo_change_mtu hsi/clients/ssi_protocol: - use core MTU range checking - remove now redundant ssip_pn_set_mtu ipoib: - set a default max MTU value - Note: ipoib's actual max MTU can vary, depending on if the device is in connected mode or not, so we'll just set the max_mtu value to the max possible, and let the ndo_change_mtu function continue to validate any new MTU change requests with checks for CM or not. Note that ipoib has no min_mtu set, and thus, the network core's mtu > 0 check is the only lower bounds here. mptlan: - use net core MTU range checking - remove now redundant mpt_lan_change_mtu fddi: - min_mtu = 21, max_mtu = 4470 - remove now redundant fddi_change_mtu (including export) fjes: - min_mtu = 8192, max_mtu = 65536 - The max_mtu value is actually one over IP_MAX_MTU here, but the idea is to get past the core net MTU range checks so fjes_change_mtu can validate a new MTU against what it supports (see fjes_support_mtu in fjes_hw.c) hsr: - min_mtu = 0 (calls ether_setup, max_mtu is 1500) f_phonet: - min_mtu = 6, max_mtu = 65541 u_ether: - min_mtu = 14, max_mtu = 15412 phonet/pep-gprs: - min_mtu = 576, max_mtu = 65530 - remove redundant gprs_set_mtu CC: netdev@vger.kernel.org CC: linux-rdma@vger.kernel.org CC: Stefan Richter <stefanr@s5r6.in-berlin.de> CC: Faisal Latif <faisal.latif@intel.com> CC: linux-rdma@vger.kernel.org CC: Cliff Whickman <cpw@sgi.com> CC: Robin Holt <robinmholt@gmail.com> CC: Jes Sorensen <jes@trained-monkey.org> CC: Marek Lindner <mareklindner@neomailbox.ch> CC: Simon Wunderlich <sw@simonwunderlich.de> CC: Antonio Quartulli <a@unstable.cc> CC: Sathya Prakash <sathya.prakash@broadcom.com> CC: Chaitra P B <chaitra.basappa@broadcom.com> CC: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> CC: MPT-FusionLinux.pdl@broadcom.com CC: Sebastian Reichel <sre@kernel.org> CC: Felipe Balbi <balbi@kernel.org> CC: Arvid Brodin <arvid.brodin@alten.se> CC: Remi Denis-Courmont <courmisch@gmail.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-28HSI: omap_ssi: drop pm_runtime_irq_safeSebastian Reichel
pm_runtime_irq_safe increases the parents runtime usage counter effectively keeping the OMAP SoC from idling. Signed-off-by: Sebastian Reichel <sre@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28HSI: omap_ssi_port: use rpm autosuspend APISebastian Reichel
Instead of immediately sending the SSI module to sleep, wait some time in case of new incoming or outgoing traffic. Signed-off-by: Sebastian Reichel <sre@kernel.org> Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28HSI: omap_ssi: call msg->complete() from process contextSebastian Reichel
msg->complete() should always be called from process context once irq_safe runtime pm flag is no longer set for omap-ssi. Signed-off-by: Sebastian Reichel <sre@kernel.org> Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28HSI: omap_ssi_port: ensure clocks are kept enabled during transferSebastian Reichel
ensure, that clocks remain enabled, when a transfer is started. Signed-off-by: Sebastian Reichel <sre@kernel.org> Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28HSI: omap_ssi_port: replace pm_runtime_put_sync with non-sync variantSebastian Reichel
There is no need to wait for hardware to really reach idle states, so just release runtime PM asynchronously. Signed-off-by: Sebastian Reichel <sre@kernel.org> Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28HSI: omap_ssi_port: avoid calling runtime_pm_*_sync inside spinlockSebastian Reichel
runtime_pm_*_sync can block when irq_safe flag is removed from omap-ssi driver, so it may not be called while a spinlock is held. Signed-off-by: Sebastian Reichel <sre@kernel.org> Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28HSI: omap_ssi_port: avoid pm_runtime_get_sync in ssi_start_dma and ssi_start_pioSebastian Reichel
These functions may be called from atomic context, so avoid synchronous runtime pm calls. Signed-off-by: Sebastian Reichel <sre@kernel.org> Tested-by: Pavel Machek <pavel@ucw.cz>
2016-06-28HSI: omap_ssi_port: switch to threaded pio irqSebastian Reichel
Move pio interrupt handler from tasklet into thread to allow runtime_pm_get_sync calls without irq_safe being set. Signed-off-by: Sebastian Reichel <sre@kernel.org> Tested-by: Pavel Machek <pavel@ucw.cz>