summaryrefslogtreecommitdiff
path: root/drivers/hwmon/Kconfig
AgeCommit message (Collapse)Author
2017-05-30hwmon: (aspeed-pwm-tacho) Select REGMAPGuenter Roeck
The driver uses regmap and thus has to select it to avoid build errors such as the following. drivers/hwmon/aspeed-pwm-tacho.c:337:21: error: variable 'aspeed_pwm_tacho_regmap_config' has initializer but incomplete type Reported-by: kbuild test robot <fengguang.wu@intel.com> Acked-by: Joel Stanley <joel@jms.id.au> Fixes: 2d7a548a3eff ("drivers: hwmon: Support for ASPEED PWM/Fan tach") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-04-30hwmon: (twl4030-madc) drop driverSebastian Reichel
This driver is no longer needed: * It has no mainline users * It has no DT support and OMAP is DT only * iio-hwmon can be used for madc, which also works with DT Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-04-10drivers: hwmon: Support for ASPEED PWM/Fan tachJaghathiswari Rankappagounder Natarajan
The ASPEED AST2400/2500 PWM controller supports 8 PWM output ports. The ASPEED AST2400/2500 Fan tach controller supports 16 tachometer inputs. The device driver matches on the device tree node. The configuration values are read from the device tree and written to the respective registers. The driver provides a sysfs entries through which the user can configure the duty-cycle value (ranging from 0 to 100 percent) and read the fan tach rpm value. Signed-off-by: Jaghathiswari Rankappagounder Natarajan <jaghu@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-03hwmon: new driver for ST stts751 thermal sensorandrea.merello
This patch adds a HWMON driver for ST Microelectronics STTS751 temperature sensors. Thanks-to: LABBE Corentin [for suggestions] Thanks-to: Guenter Roeck [for suggestion and discussions] Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Cc: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-12-09hwmon: Add Texas Instruments TMP108 temperature sensor driver.John Muir
Add support for the TI TMP108 temperature sensor with some device configuration parameters. Signed-off-by: John Muir <john@jmuir.com> [groeck: Initialize of_match_table] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-12-09hwmon: (lm90) Mention support for TI TMP451 in Kconfig descriptionTobias Klauser
The lm90 driver also supports the Texas Instruments TMP451 sensor chip. Since the Kconfig description for the driver includes a list of all compatible chips, mention the TI TMP451 there as well. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-12-02hwmon: Add tc654 driverChris Packham
Add support for the tc654 and tc655 fan controllers from Microchip. http://ww1.microchip.com/downloads/en/DeviceDoc/20001734C.pdf Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Rob Herring <robh@kernel.org> [groeck: Fixed continuation line alignments] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-09-13hwmon: (lm95245) Select REGMAP_I2CAxel Lin
This driver now uses regmap APIs, so it needs to select REGMAP_I2C. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-09-08hwmon: (tmp102) Convert to use new hwmon registration APIGuenter Roeck
Simplify code and reduce code size by using the new hwmon registration API. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-09-08hwmon: (lm75) Convert to use new hwmon registration APIGuenter Roeck
Simplify code and reduce code size by using the new hwmon registration API. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-09-08hwmon: Add xgene hwmon driverhotran
This patch adds hardware temperature and power reading support for APM X-Gene SoC using the mailbox communication interface. Signed-off-by: Hoan Tran <hotran@apm.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-07-20hwmon: Add driver for FTS BMC chip "Teutates"Thilo Cestonaro
This driver implements hardware monitoring and watchdog support for the FTS BMC Chip "Teutates". Signed-off-by: Thilo Cestonaro <thilo@cestona.ro> [groeck: Updated subject and description; fixed dependencies] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-07-12hwmon: (tmp102) Convert to use regmap, and drop local cacheGuenter Roeck
By converting the driver to regmap, we can use regmap to cache non-volatile registers. Stop caching the temperature register; while potentially reading it more often can result in reading it more often than necessary, this is offset by the gain due to not re-reading the limit registers. A positive side effect of this change is that limit registers can now be read and updated before the first temperature conversion is complete. Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-07-09hwmon: (lm75) Convert to use regmapGuenter Roeck
Convert to use regmap. Leave caching to regmap and drop the register update function. While this can result in additional read operations if the temperature register is read continuously, it avoids re-reading the limit registers and thus overall reduces complexity. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-06-27hwmon: (jc42) Add support for Microchip MCP9808 temperature sensorAlison Schofield
MCP9808 is not officially compliant to JC-42, similar to MCP9804, but its registers are compatible to JC-42. Signed-off-by: Alison Schofield <amsfield22@gmail.com> Cc: Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-06-27hwmon: Add support for INA3221 Triple Current/Voltage MonitorsAndrew F. Davis
Add support for the the INA3221 26v capable, Triple channel, Bi-Directional, Zero-Drift, Low-/High-Side, Current/Voltage Monitor with I2C interface. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-06-27hwmon: (tmp401) Add support for TI TMP461Andrew F. Davis
Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-06-27hwmon: add support for Sensirion SHT3x sensorsDavid Frey
This driver implements support for the Sensirion SHT3x-DIS chip, a humidity and temperature sensor. Temperature is measured in degrees celsius, relative humidity is expressed as a percentage. In the sysfs interface, all values are scaled by 1000, i.e. the value for 31.5 degrees celsius is 31500. Signed-off-by: Pascal Sachs <pascal.sachs@sensirion.com> [groeck: Fixed 'Variable length array is used' gcc warning] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19hwmon: (it87) Add support for IT8628EGuenter Roeck
IT8628E is functionally identical to IT8620E. Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19hwmon: (fam15h_power) Add CPU_SUP_AMD as the dependenceHuang Rui
This patch adds CONFIG_CPU_SUP_AMD as the dependence of fam15h_power driver. Because the following patch will use the interface from x86/kernel/cpu/amd.c. Otherwise, the below error might be encountered: All errors (new ones prefixed by >>): drivers/built-in.o: In function `fam15h_power_probe': >> fam15h_power.c:(.text+0x26e3a3): undefined reference to >> `amd_get_cores_per_cu' fam15h_power.c:(.text+0x26e41e): undefined reference to `amd_get_cores_per_cu' Reported-by: build test robot <lkp@intel.com> Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19hwmon: (max31722) Add support for MAX31722/MAX31723 temperature sensorsTiberiu Breana
Add basic support for the Maxim Integrated MAX31722/MAX31723 SPI temperature sensors / thermostats. Includes: - ACPI support; - raw temperature readings; - power management Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX31722-MAX31723.pdf Signed-off-by: Tiberiu Breana <tiberiu.a.breana@intel.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-03-08hwmon: Create an NSA320 hardware monitoring driverAdam Baker
Create a driver to support the hardware monitoring chip present in the Zyxel NSA320 and some of the other Zyxel NAS devices. The driver reads fan speed and temperature from a suitably pre-programmed MCU on the device. Signed-off-by: Adam Baker <linux@baker-net.org.uk> [groeck: Dropped .owner field initialization] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-03-05hwmon: (ntc_thermistor) Add support for ncpXXxh103Joseph McNally
This patch adds support for the Murata NCP15XH103 thermistor series. Signed-off-by: Joseph McNally <jmcna06@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-03-05hwmon: Add LTC2990 sensor driverMike Looijmans
This adds support for the Linear Technology LTC2990 I2C System Monitor. The LTC2990 supports a combination of voltage, current and temperature monitoring. This driver currently only supports reading two currents by measuring two differential voltages across series resistors, in addition to the Vcc supply voltage and internal temperature. This is sufficient to support the Topic Miami SOM which uses this chip to monitor the currents flowing into the FPGA and the CPU parts. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-12-18hwmon: (htu21) Remove driverGuenter Roeck
HTU21 is now supported by IIO, and can be instantiated as hwmon driver using the iio-hwmon bridge. An explicit hwmon driver is no longer needed. Cc: William Markezana <william.markezana@meas-spec.com> Cc: Ludovic Tancerel <ludovic.tancerel@maplehightech.com> Cc: Jonathan Cameron <jic23@kernel.org> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-12-18hwmon: (sht15) Select CONFIG_BITREVERSEArnd Bergmann
If CONFIG_BITREVERSE is not built-in, the sht15 driver fails to link: drivers/built-in.o: In function `sht15_crc8': drivers/hwmon/sht15.c:195: undefined reference to `byte_rev_table' This adds a Kconfig 'select' statement, like all other users of bitrev.h have it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 33836ee98533 ("hwmon:change sht15_reverse()") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-11-16hwmon: (scpi) add thermal-of dependencyArnd Bergmann
The newly added scpi thermal support is broken when the scpi driver is built-in but the thermal driver is a loadable module: drivers/built-in.o: In function `scpi_hwmon_probe': (.text+0x444d70): undefined reference to `thermal_zone_of_sensor_unregister' (.text+0x444d94): undefined reference to `thermal_zone_of_sensor_register' drivers/built-in.o: In function `scpi_hwmon_remove': (text+0x444e6c): undefined reference to `thermal_zone_of_sensor_unregister' This uses the same Kconfig trick that we have in a couple of other drivers already to ensure we can only select the driver in valid configurations when either THERMAL_OF is disabled, or when with a dependency on CONFIG_THERMAL that can force SCPI to be a loadable module in the case I was hitting. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 68acc77a2d51 ("hwmon: Support thermal zones registration for SCP temperature sensors") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-11-15hwmon: (ina2xx) Fix build issue by selecting REGMAP_I2CLi Yang
Since a0de56c81fcf ("hwmon: (ina2xx) convert driver to using regmap") the driver requires REGMAP_I2C to build. Select it by default in Kconfig. Reported-by: Guo Chunrong <B40290@freescale.com> Cc: Marc Titinger <mtitinger@baylibre.com> Signed-off-by: Li Yang <leoli@freescale.com> Fixes: a0de56c81fcf ("hwmon: (ina2xx) convert driver to using regmap") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-11-10Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "As we've enabled multiplatform kernels on ARM, and greatly done away with the contents under arch/arm/mach-*, there's still need for SoC-related drivers to go somewhere. Many of them go in through other driver trees, but we still have drivers/soc to hold some of the "doesn't fit anywhere" lowlevel code that might be shared between ARM and ARM64 (or just in general makes sense to not have under the architecture directory). This branch contains mostly such code: - Drivers for qualcomm SoCs for SMEM, SMD and SMD-RPM, used to communicate with power management blocks on these SoCs for use by clock, regulator and bus frequency drivers. - Allwinner Reduced Serial Bus driver, again used to communicate with PMICs. - Drivers for ARM's SCPI (System Control Processor). Not to be confused with PSCI (Power State Coordination Interface). SCPI is used to communicate with the assistant embedded cores doing power management, and we have yet to see how many of them will implement this for their hardware vs abstracting in other ways (or not at all like in the past). - To make confusion between SCPI and PSCI more likely, this release also includes an update of PSCI to interface version 1.0. - Rockchip support for power domains. - A driver to talk to the firmware on Raspberry Pi" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (57 commits) soc: qcom: smd-rpm: Correct size of outgoing message bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus bus: sunxi-rsb: Add Allwinner Reduced Serial Bus (RSB) controller bindings ARM: bcm2835: add mutual inclusion protection drivers: psci: make PSCI 1.0 functions initialization version dependent dt-bindings: Correct paths in Rockchip power domains binding document soc: rockchip: power-domain: don't try to print the clock name in error case soc: qcom/smem: add HWSPINLOCK dependency clk: berlin: add cpuclk ARM: berlin: dts: add CLKID_CPU for BG2Q ARM: bcm2835: Add the Raspberry Pi firmware driver soc: qcom: smem: Move RPM message ram out of smem DT node soc: qcom: smd-rpm: Correct the active vs sleep state flagging soc: qcom: smd: delete unneeded of_node_put firmware: qcom-scm: build for correct architecture level soc: qcom: smd: Correct SMEM items for upper channels qcom-scm: add missing prototype for qcom_scm_is_available() qcom-scm: fix endianess issue in __qcom_scm_is_call_available soc: qcom: smd: Reject send of too big packets soc: qcom: smd: Handle big endian CPUs ...
2015-10-14Merge tag 'arm-scpi-for-v4.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/drivers Merge "ARM System Control and Power Interface(SCPI) support" from Sudeep Holla It adds support for the following features provided by SCP firmware using different subsystems in Linux: 1. SCPI mailbox protocol driver which using mailbox framework 2. Clocks provided by SCP using clock framework 3. CPU DVFS(cpufreq) using existing arm-big-little driver 4. SCPI based sensors including temperature sensors * tag 'arm-scpi-for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: hwmon: Support thermal zones registration for SCP temperature sensors hwmon: Support sensors exported via ARM SCP interface firmware: arm_scpi: Extend to support sensors Documentation: add DT bindings for ARM SCPI sensors cpufreq: arm_big_little: add SCPI interface driver clk: scpi: add support for cpufreq virtual device clk: add support for clocks provided by SCP(System Control Processor) firmware: add support for ARM System Control and Power Interface(SCPI) protocol Documentation: add DT binding for ARM System Control and Power Interface(SCPI) protocol
2015-10-14hwmon: Driver for Maxim MAX31790Il Han
The driver supports the Maxim MAX31790. Signed-off-by: Il Han <corone.il.han@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-10-09hwmon: Support sensors exported via ARM SCP interfacePunit Agrawal
Create a driver to add support for SoC sensors exported by the System Control Processor (SCP) via the System Control and Power Interface (SCPI). The supported sensor types is one of voltage, temperature, current, and power. The sensor labels and values provided by the SCP are exported via the hwmon sysfs interface. Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Cc: Sudeep Holla <sudeep.holla@arm.com>
2015-09-12hwmon: (nct6775) Add support for NCT6793DGuenter Roeck
NCT6793D is register compatible with NCT6792D. Also move nct6775_sio_names[] closer to enum kinds to simplify adding new chips. Tested-by: Grazvydas Ignotas <notasas@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-08-09hwmon: (it87) Add support for IT8732FJustin Maggard
Add support for the IT8732F. This chip is pretty similar to IT8721F, with the main difference being that the ADC LSB is 10.9 mV instead of 12 mV. Signed-off-by: Justin Maggard <jmaggard@netgear.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-06-26Merge tag 'char-misc-4.2-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here's the big char/misc driver pull request for 4.2-rc1. Lots of mei, extcon, coresight, uio, mic, and other driver updates in here. Full details in the shortlog. All of these have been in linux-next for some time with no reported problems" * tag 'char-misc-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (176 commits) mei: me: wait for power gating exit confirmation mei: reset flow control on the last client disconnection MAINTAINERS: mei: add mei_cl_bus.h to maintained file list misc: sram: sort and clean up included headers misc: sram: move reserved block logic out of probe function misc: sram: add private struct device and virt_base members misc: sram: report correct SRAM pool size misc: sram: bump error message level on unclean driver unbinding misc: sram: fix device node reference leak on error misc: sram: fix enabled clock leak on error path misc: mic: Fix reported static checker warning misc: mic: Fix randconfig build error by including errno.h uio: pruss: Drop depends on ARCH_DAVINCI_DA850 from config uio: pruss: Add CONFIG_HAS_IOMEM dependence uio: pruss: Include <linux/sizes.h> extcon: Redefine the unique id of supported external connectors without 'enum extcon' type char:xilinx_hwicap:buffer_icap - change 1/0 to true/false for bool type variable in function buffer_icap_set_configuration(). Drivers: hv: vmbus: Allocate ring buffer memory in NUMA aware fashion parport: check exclusive access before register w1: use correct lock on error in w1_seq_show() ...
2015-06-21hwmon: add driver for Microchip TC74Maciej S. Szmigiero
Add hwmon driver for the Microchip TC74. The TC74 is a single-input 8-bit I2C temperature sensor, with +-2 degrees centigrade accuracy. Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-05-31hwmon: Allow compile test of GPIO consumers if !GPIOLIBGeert Uytterhoeven
The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where appropriate. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jean Delvare <jdelvare@suse.de> Cc: Guenter Roeck <linux@roeck-us.net> Cc: lm-sensors@lm-sensors.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-05-31hwmon: (ntc_thermistor) Add support for ncpXXwf104Beomho Seo
This patch adds support for the ntc thermistor NCPXXWF104 series. Cc: Jean Delvare <jdelvare@suse.de> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Beomho Seo <beomho.seo@samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-05-24hwmon: Allow to compile dell-smm-hwmon driver without /proc/i8kPali Rohár
This patch splits CONFIG_I8K compile option to SENSORS_DELL_SMM and CONFIG_I8K. Option SENSORS_DELL_SMM is now used to enable compilation of dell-smm-hwmon driver and old CONFIG_I8K option to enable /proc/i8k interface in driver. So this change allows to compile dell-smm-hwmon driver without legacy /proc/i8k interface which is needed only for old Dell Inspirion models or for userspace i8kutils package. For backward compatibility when CONFIG_I8K is enabled then also SENSORS_DELL_SMM is enabled and so driver dell-smm-hwmon (with /proc/i8k) is compiled. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-05hwmon: (it87) Add support for IT8620EGuenter Roeck
IT8620E is mostly compatible to IT7828F. Add generic support for it. IT8620E supports up to 6 fan tachometers and 6 pwm controls. Support for the 6th tachometer and for the additional pwm controls are addded in separate patches. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-04-05hwmon: (it87) Add support for IT8790EGuenter Roeck
IT8790E is a super-IO chip with three fan tachometers. It is mostly compatible to IT8728F, but only supports three fan tachometers instead of five. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-10hwmon: (gpio-fan) Fix build with CONFIG_THERMAL=m and SENSORS_GPIO_FAN=yRandy Dunlap
Fix build error when CONFIG_THERMAL=m and SENSORS_GPIO_FAN=y by preventing that combination. Fixes these build errors: drivers/built-in.o: In function `gpio_fan_remove': gpio-fan.c:(.text+0x21e97e): undefined reference to `thermal_cooling_device_unregister' drivers/built-in.o: In function `gpio_fan_probe': gpio-fan.c:(.text+0x21efbc): undefined reference to `thermal_cooling_device_register' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jean Delvare <jdelvare@suse.de> Cc: Guenter Roeck <linux@roeck-us.net> Cc: lm-sensors@lm-sensors.org Cc: Simon Guinot <sguinot@lacie.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09hwmon: (pwm-fan) Fix build when THERMAL=mRandy Dunlap
Fix build errors when CONFIG_THERMAL=m and SENSORS_PWM_FAN=y by restricting SENSORS_PWM_FAN to 'm' when THERMAL=m. drivers/built-in.o: In function `pwm_fan_remove': pwm-fan.c:(.text+0x22ba58): undefined reference to `thermal_cooling_device_unregister' drivers/built-in.o: In function `pwm_fan_probe': pwm-fan.c:(.text+0x22bebb): undefined reference to `thermal_of_cooling_device_register' pwm-fan.c:(.text+0x22bf11): undefined reference to `thermal_cdev_update' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Kamil Debski <k.debski@samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09hwmon: Add Nuvoton NCT7904 hwmon driverVadim V. Vlasov
The NCT7904D is a hardware monitor supporting up to 20 voltage sensors, internal temperature sensor, Intel PECI and AMD SB-TSI CPU temperature interface, up to 12 fan tachometer inputs, up to 4 fan control channels with SmartFan. Signed-off-by: Vadim V. Vlasov <vvlasov@dev.rtsoft.ru> [Guenter Roeck: Fixed whitespace errors, dropped redundant comment] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09hwmon: (it87) Add support for IT8786EThomas Lorblanches
IT8786E is mostly compatible with IT8771 / IT8772. Parameters determined by testing various combinations. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Thomas Lorblanches <zlika_ese@hotmail.com> [Guenter Roeck: merged from github, addressed review comments] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09hwmon: (jc42) Add support for additional IDT temperature sensorsGuenter Roeck
TS3000GB0 has a new device ID (0x2913). Since IDT's datasheets suggest that the upper 8 bit of the device ID reflect the chip ID and the lower 8 bit reflect the version number, modify the code to accept all chips with ID 0x29xx. Also add support for TS3001 and TSE2004. Some of the datasheets for older chips are no longer available from the IDT web site, so replace explicit links in the documentation with a generic note. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09hwmon: (it87) Add support for IT8781FGuenter Roeck
IT8781F is mostly compatible to IT8782F. Major difference is that it only supports four instead of six UART channels, and therefore does not share the uart6 pins. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-02-19Merge branch 'kconfig' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kconfig updates from Michal Marek: "Yann E Morin was supposed to take over kconfig maintainership, but this hasn't happened. So I'm sending a few kconfig patches that I collected: - Fix for missing va_end in kconfig - merge_config.sh displays used if given too few arguments - s/boolean/bool/ in Kconfig files for consistency, with the plan to only support bool in the future" * 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kconfig: use va_end to match corresponding va_start merge_config.sh: Display usage if given too few arguments kconfig: use bool instead of boolean for type definition attributes
2015-02-02hwmon: (ads2828) Convert to use regmapGuenter Roeck
Simplify code and reduce code size by using regmap to access i2c registers. Reviewed-and-Tested-by: Robert Rosengren <robert.rosengren@axis.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-01-25hwmon: (ina2xx) Add ina231 compatible stringKevin Hilman
Add support for "ina231" as compatible string, and update Documentation and Kconfig accordingly. Tested with the Exynos5422-based odroid-xu3 board which has on-board INA231 sensors. Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>