summaryrefslogtreecommitdiff
path: root/drivers/hwmon/pmbus/Kconfig
AgeCommit message (Collapse)Author
2017-11-05pmbus: Add driver for Maxim MAX31785 Intelligent Fan ControllerAndrew Jeffery
The Maxim MAX31785 is a PMBus device providing closed-loop, multi-channel fan management with temperature and remote voltage sensing. It supports various fan control features, including PWM frequency control, temperature hysteresis, dual tachometer measurements, and fan health monitoring. This patch presents a basic driver using only the existing features of the PMBus subsystem. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> [groeck: Modified description to clarify that fan control is not yet provided] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-08-30hwmon: (pmbus) Add support for Texas Instruments tps53679 deviceVadim Pasternak
The below lists of VOUT_MODE command readout with their related VID protocols, Digital to Analog Converter steps, supported by the device: VR12.0 mode, 5-mV DAC - 0x21 VR12.5 mode, 10-mV DAC - 0x22 VR13.0 mode, 10-mV DAC - 0x24 IMVP8 mode, 5-mV DAC - 0x25 VR13.0 mode, 5-mV DAC - 0x27 Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-08-29hwmon: (pmbus) Add IBM Common Form Factor (CFF) power supply driverEdward A. James
Add the driver to monitor IBM CFF power supplies with hwmon over pmbus. Signed-off-by: Edward A. James <eajames@us.ibm.com> [groeck: drop 'default n'; include bitops.h instead of jiffies.h] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-06-11hwmon: (pmbus) Add client driver for IR35221Samuel Mendoza-Jonas
IR35221 is a Digital DC-DC Multiphase Converter Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> [groeck: Preserve alphabetic order in Kconfig; add missing break statements (from Dan Carpenter); add missing error checks] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-09-08hwmon: (ucd9000) Add support for UCD90160 Power Supply SequencerMatt Weber
The UCD90160 Power Supply Sequencer reuses the existing register layout, so just an id addition was required. Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com> Signed-off-by: Ronak Desai <ronak.desai@rockwellcollins.com> [groeck: Updated description, ordered alphabetically, added documentation] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-03-05hwmon: (adm1275) Add support for ADM1278Guenter Roeck
ADM1278 is mostly compatible to other chips of the same series. Besides the usual difference in coefficients, it supports a temperature sensor, and it can measure both input and output voltage at the same time. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-12-18hwmon: (pmbus) Add client driver for LTC3815Guenter Roeck
LTC3815 is a Monolithic Synchronous DC/DC Step-Down Converter. Cc: Michael Jones <mike@proclivis.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-08-19hwmon: (ltc2978) Add support for LTM4675Guenter Roeck
LTM2975 is a dual 9A or single 18A μModule regulator. It is register compatible with LTM4676. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-08-17hwmon: (ltc2978) Add support for LTC3886Guenter Roeck
LTC3886 is a is a dual PolyPhase DC/DC synchronous step-down switching regulator controller. It is mostly command compatible to LTC3883, but supports two phases instead of one. Suggested-by: Michael Jones <mike@proclivis.com> Tested-by: Michael Jones <mike@proclivis.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-08-17hwmon: (ltc2978) Add support for LTC2980 and LTM2987Guenter Roeck
LTC2980 and LTM2987 are command compatible to LTC2977. They consist of two LTC2977 on a single die, and are instantiated as two separate chips, each supporting eight channels. Suggested-by: Michael Jones <mike@proclivis.com> Tested-by: Michael Jones <mike@proclivis.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-08-17hwmon: (ltc2978) Add support for LTC2975Guenter Roeck
LTC2975 is mostly compatible to LTC2974, but supports input current and power measurement. Tested-by: Michael Jones <mike@proclivis.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-08-12hwmon: (ltc2978) Add support for LTC3887Guenter Roeck
LTC3887 is an enhanced version of LTC3880 and supports the same commands. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-08-10hwmon: (pmbus) Add device IDs for TPS544{B,C}2{0,5}Guenter Roeck
Add device IDs and references for Texas Instruments TPS544B20, TPS544B25, TPS544C20, and TPS544C25 to the generic PMBus driver. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-08-09hwmon: (pmbus) Add support for MAX20751Guenter Roeck
MAX20751 is a multiphase power controller with internal buck converter. It uses VR12.0 to report the output voltage. This requires an explicit driver, since the VR version can not be auto-detected. The chip supports a manufacturer specific command to fine-tune the output voltage. This command is not currently supported. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-08-09hwmon: (adm1275) Add support for ADM1293 and ADM1294Guenter Roeck
ADM1293 and ADM1294 are mostly compatible with other chips of the same series, but have more configuration options. There are also some differences in register details. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-01-07kconfig: use bool instead of boolean for type definition attributesChristoph Jaeger
Support for keyword 'boolean' will be dropped later on. No functional change. Reference: http://lkml.kernel.org/r/cover.1418003065.git.cj@linux.com Signed-off-by: Christoph Jaeger <cj@linux.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-11-30hwmon: (ltc2978) Add regulator supportAlan Tull
Add simple on/off regulator support for ltc2978 and other pmbus parts supported by the ltc2978 driver. Signed-off-by: Alan Tull <atull@opensource.altera.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-08-04hwmon: (pmbus) Add tps40422 front-end driverZhu, Richard \(NSN - CN/Beijing\)
For TI power management chip TPS40422, READ_TEMPERATURE_2 command is supported on page 1 of the chip, but the original driver(pmbus.c) only tried to detect this command on page 0, this will lead to a result that the temperature sensor in page 1 couldn't be detected. This change is to isolate the tps40422 driver from pmbus.c into a solo front-end driver. Signed-off-by: Zhu Laiwen <richard.zhu@nsn.com> [Guenter Roeck: Dropped unnecessary license text (fixes checkpatch warning)] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07hwmon: (pmbus/lm25066) Add support for LM25056Guenter Roeck
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07hwmon: (pmbus/ltc2978) Add support for LTC2974 and LTC3883Guenter Roeck
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06hwmon: (pmbus/max34440) Add support for MAX34460 and MAX34461Guenter Roeck
MAX34460 is a PMBus 12-Channel Voltage Monitor & Sequencer. MAX34461 is a PMBus 16-Channel Voltage Monitor & Sequencer. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-10-14hwmon: (pmbus) remove CONFIG_EXPERIMENTALKees Cook
This config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it. CC: Guenter Roeck <linux@roeck-us.net> CC: Jean Delvare <khali@linux-fr.org> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-03-18hwmon: (zl6100) Add support for ZL9101M and ZL9117MGuenter Roeck
ZL9101M and ZL9117M are compatible to ZL6100. Add support to the zl6100 driver. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org>
2012-03-18hwmon: (adm1275) Add support for ADM1075Guenter Roeck
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-03-18hwmon: (max34440) Add support for MAX34446Guenter Roeck
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-03-18hwmon: (pmbus) Add support for Lineage Power MDT040Guenter Roeck
MDT040 is supported by the generic PMBus driver. Add device ID and reference to datasheet. Also mention Lineage Power device support in Kconfig. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-03-18hwmon: (pmbus) Add support for TI TPS40400 and TPS40422Guenter Roeck
TPS40400 and TPS40422 are supported by the generic PMBus driver. Add device IDs and data sheet references. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-01-05hwmon: (pmbus/zl6100) Add support for Ericsson BMR45[0,1] and BMR46[2,3,4]Guenter Roeck
Add support for Ericsson BMR450, BMR451, BMR462, BMR463, and BMR464, which are based on ZL2005 and ZL2008, to zl6100 driver. Remove BMR450 and BMR451 device IDs from generic PMBus driver. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2012-01-05hwmon: (pmbus/zl6100) Add support for ZL2005Guenter Roeck
Add explicit support for ZL2005. Functionality is almost the same as with other Zilker Labs / Intersil chips, but limit register detection does not work reliably. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2011-10-24hwmon: (pmbus/ltc2978) Add support for LTC3880 to LTC2978 driverGuenter Roeck
The LTC3880 PMBus command set is comparable to LTC2978. Add support for it to the LTC2978 driver. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2011-10-24hwmon: (pmbus/ltc2978) Explicit driver for LTC2978Guenter Roeck
Provide explicit driver for LTC2978 to enable support for minimum and peak attributes. Remove ltc2978 chip id from generic pmbus driver. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2011-10-24hwmon: (pmbus) Add support for Intersil power management chipsGuenter Roeck
Add support for Intersil / Zilker Labs ZL2004, ZL2006, ZL2008, ZL2105, ZL2106, ZL6100, and ZL6105. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2011-10-24hwmon: (pmbus/adm1275) Add support for ADM1276Guenter Roeck
ADM1276 is mostly compatible to ADM1275, with added support for input power measurement. Add support for it to the ADM1275 driver. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org>
2011-07-28hwmon: (pmbus) Add client driver for LM25066, LM5064, and LM5066Guenter Roeck
PMBus client driver supporting National Semiconductor LM25066, LM5064, and LM5066. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2011-07-28hwmon: (pmbus) Add ADP4000, NCP4200 and NCP4208 to list of supported devicesGuenter Roeck
Add ADP4000, NCP4200 and NCP4208 to the list of devices supported by the generic PMBus driver, and add device IDs to enable explicit instantiation. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org>
2011-07-28hwmon: (pmbus) Move PMBus drivers to drivers/hwmon/pmbusGuenter Roeck
Since the number of PMBus drivers is getting large, move them into directory drivers/hwmon/pmbus to improve readability and scalability. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
generated by cgit (git 2.34.1) at 2024-06-07 18:56:23 +0000