| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2021-11-30 | hwmon: (pwm-fan) Ensure the fan going on in .probe() | Billy Tsai | |
| Before commit 86585c61972f ("hwmon: (pwm-fan) stop using legacy PWM functions and some cleanups") pwm_apply_state() was called unconditionally in pwm_fan_probe(). In this commit this direct call was replaced by a call to __set_pwm(ct, MAX_PWM) which however is a noop if ctx->pwm_value already matches the value to set. After probe the fan is supposed to run at full speed, and the internal driver state suggests it does, but this isn't asserted and depending on bootloader and pwm low-level driver, the fan might just be off. So drop setting pwm_value to MAX_PWM to ensure the check in __set_pwm doesn't make it exit early and the fan goes on as intended. Cc: stable@vger.kernel.org Fixes: 86585c61972f ("hwmon: (pwm-fan) stop using legacy PWM functions and some cleanups") Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20211130092212.17783-1-billy_tsai@aspeedtech.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> | |||
| 2021-02-22 | Merge tag 'thermal-v5.12-rc1' of ↵ | Linus Torvalds | |
| git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal updates from Daniel Lezcano: - Use the newly introduced 'hot' and 'critical' ops for the acpi thermal driver (Daniel Lezcano) - Remove the notify ops as it is no longer used (Daniel Lezcano) - Remove the 'forced passive' option and the unused bind/unbind functions (Daniel Lezcano) - Remove the THERMAL_TRIPS_NONE and the code cleanup around this macro (Daniel Lezcano) - Rework the delays to make them pre-computed instead of computing them again and again at each polling interval (Daniel Lezcano) - Remove the pointless 'thermal_zone_device_reset' function (Daniel Lezcano) - Use the critical and hot ops to prevent an unexpected system shutdown on int340x (Kai-Heng Feng) - Make the cooling device state private to the thermal subsystem (Daniel Lezcano) - Prevent to use not-power-aware actor devices with the power allocator governor (Lukasz Luba) - Remove 'zx' and 'tango' support along with the corresponding platforms (Arnd Bergman) - Fix several issues on the Omap thermal driver (Tony Lindgren) - Add support for adc-tm5 PMIC thermal monitor for Qcom platforms (Dmitry Baryshkov) - Fix an initialization loop in the adc-tm5 (Colin Ian King) - Fix a return error check in the cpufreq cooling device (Viresh Kumar) * tag 'thermal-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (26 commits) thermal: cpufreq_cooling: freq_qos_update_request() returns < 0 on error thermal: qcom: Fix comparison with uninitialized variable channels_available thermal: qcom: add support for adc-tm5 PMIC thermal monitor dt-bindings: thermal: qcom: add adc-thermal monitor bindings thermal: ti-soc-thermal: Use non-inverted define for omap4 thermal: ti-soc-thermal: Simplify polling with iopoll thermal: ti-soc-thermal: Fix stuck sensor with continuous mode for 4430 thermal: ti-soc-thermal: Skip pointless register access for dra7 thermal/drivers/zx: Remove zx driver thermal/drivers/tango: Remove tango driver thermal: power allocator: fail binding for non-power actor devices thermal/core: Make cooling device state change private thermal: intel: pch: Fix unexpected shutdown at critical temperature thermal: int340x: Fix unexpected shutdown at critical temperature thermal/core: Remove pointless thermal_zone_device_reset() function thermal/core: Remove ms based delay fields thermal/core: Use precomputed jiffies for the polling thermal/core: Precompute the delays from msecs to jiffies thermal/core: Remove unused macro THERMAL_TRIPS_NONE thermal/core: Remove THERMAL_TRIPS_NONE test ... | |||
| 2021-01-27 | hwmon: (pwm-fan) stop using legacy PWM functions and some cleanups | Uwe Kleine-König | |
| pwm_apply_state() does what the legacy functions pwm_config() and pwm_{en,dis}able() do in a single function call. This simplifies error handling and is more efficient for new-style PWM hardware drivers. Instead of repeatedly querying the PWM framework about the initial PWM configuration, cache the settings in driver data. Also use __set_pwm() in .probe() to have the algorithm calculating the PWM state in a single place. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210112191314.124686-1-u.kleine-koenig@pengutronix.de [groeck: Added missing empty line after declaration] Signed-off-by: Guenter Roeck <linux@roeck-us.net> | |||
| 2021-01-27 | hwmon: (pwm-fan) Support multiple fan tachometers | Paul Barker | |
| The pwm-fan driver is extended to support multiple fan tachometer signals connected to GPIO inputs. This is intended to support the case where a single PWM output signal is routed to multiple fans, each of which have a tachometer output connected back to a GPIO pin. The number of fan tachometer inputs is determined by the number of interrupt sources configured for the pwm-fan device. The number of pulses-per-revolution entries should match the number of interrupt sources so that each input has a value assigned. The fan tachometer measurements are exposed as sysfs files fan1_input, fan2_input, etc up to the number of configured inputs. Signed-off-by: Paul Barker <pbarker@konsulko.com> Link: https://lore.kernel.org/r/20201212195008.6036-3-pbarker@konsulko.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> | |||
| 2021-01-27 | hwmon: (pwm-fan) Store tach data separately | Paul Barker | |
| The data for the (optional) fan tachometer input is moved to a separate structure which is only allocated if an input is actually configured. After this change the pulse IRQ handler takes a pointer to the tachometer data structure instead of the whole device context. Signed-off-by: Paul Barker <pbarker@konsulko.com> Link: https://lore.kernel.org/r/20201212195008.6036-2-pbarker@konsulko.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> | |||
| 2021-01-19 | thermal/core: Make cooling device state change private | Daniel Lezcano | |
| The change of the cooling device state should be used by the governor or at least by the core code, not by the drivers themselves. Remove the API usage and move the function declaration to the internal headers. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Zhang Rui <rui.zhang@intel.com> Link: https://lore.kernel.org/r/20210118173824.9970-1-daniel.lezcano@linaro.org | |||
| 2020-12-30 | hwmon: (pwm-fan) Ensure that calculation doesn't discard big period values | Uwe Kleine-König | |
| With MAX_PWM being defined to 255 the code unsigned long period; ... period = ctx->pwm->args.period; state.duty_cycle = DIV_ROUND_UP(pwm * (period - 1), MAX_PWM); calculates a too small value for duty_cycle if the configured period is big (either by discarding the 64 bit value ctx->pwm->args.period or by overflowing the multiplication). As this results in a too slow fan and so maybe an overheating machine better be safe than sorry and error out in .probe. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20201215092031.152243-1-u.kleine-koenig@pengutronix.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> | |||
| 2020-12-02 | hwmon: (pwm-fan) Convert to hwmon_device_register_with_info API | Paul Barker | |
| The pwm-fan driver is updated to use the recommended API. Signed-off-by: Paul Barker <pbarker@konsulko.com> [groeck: Dropped unused variable] Signed-off-by: Guenter Roeck <linux@roeck-us.net> | |||
| 2020-12-02 | hwmon: pwm-fan: Refactor pwm_fan_probe | Paul Barker | |
| Use platform_irq_count to determine the number of fan tachometer inputs configured in the device tree. At this stage we support either 0 or 1 inputs. Once we have this information we only need to read the pulses-per-revolution value if a fan tachometer is actually configured via an IRQ value. Also add a debug print of the IRQ number and the pulses-per-revolution value to aid in investigating issues. Signed-off-by: Paul Barker <pbarker@konsulko.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20201126174408.755-2-pbarker@konsulko.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> | |||
| 2020-11-12 | hwmon: (pwm-fan) Fix RPM calculation | Paul Barker | |
| To convert the number of pulses counted into an RPM estimation, we need to divide by the width of our measurement interval instead of multiplying by it. If the width of the measurement interval is zero we don't update the RPM value to avoid dividing by zero. We also don't need to do 64-bit division, with 32-bits we can handle a fan running at over 4 million RPM. Signed-off-by: Paul Barker <pbarker@konsulko.com> Link: https://lore.kernel.org/r/20201111164643.7087-1-pbarker@konsulko.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> | |||
| 2020-09-23 | hwmon: (pwm-fan) Use dev_err_probe() to simplify error handling | Anson Huang | |
| dev_err_probe() can reduce code size, uniform error handling and record the defer probe reason etc., use it to simplify the code. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Link: https://lore.kernel.org/r/1597649673-22329-1-git-send-email-Anson.Huang@nxp.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> | |||
| 2020-06-16 | hwmon: pwm-fan: Use 64-bit division macro | Guru Das Srinagesh | |
| Since the PWM framework is switching struct pwm_args.period's datatype to u64, prepare for this transition by using DIV_ROUND_UP_ULL to handle a 64-bit dividend. Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> | |||
| 2020-01-23 | hwmon: (pwm-fan) stop fan on shutdown | Akinobu Mita | |
| The pwm-fan driver stops the fan in suspend but leaves the fan on in shutdown. It seems strange to leave the fan on in shutdown because there is no use case in my mind and the gpio-fan driver on the other hand stops in shutdown. This change turns off the fan in shutdown. If anyone complains then we'll add an optional property to switch the behavior. Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Kamil Debski <kamil@wypas.org> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Link: https://lore.kernel.org/r/1579534344-11694-1-git-send-email-akinobu.mita@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> | |||
| 2019-08-28 | hwmon: pwm-fan: Use platform_get_irq_optional() | Thierry Reding | |
| The PWM fan interrupt is optional, so we don't want an error message in the kernel log if it wasn't specified. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://lore.kernel.org/r/20190828083411.2496-2-thierry.reding@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | |||
| 2019-06-23 | hwmon: (pwm-fan) Check return value from devm_add_action_or_reset | Guenter Roeck | |
| devm_add_action_or_reset() can fail due to a memory allocation failure. Check for it and return the error if that happens. Fixes: 37bcec5d9f71 ("hwmon: (pwm-fan) Use devm_thermal_of_cooling_device_register") Signed-off-by: Guenter Roeck <linux@roeck-us.net> | |||
| 2019-05-30 | treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 | Thomas Gleixner | |
| Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | |||
| 2019-05-16 | Merge branch 'linus' of ↵ | Linus Torvalds | |
| git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal Pull thermal soc updates from Eduardo Valentin: - thermal core has a new devm_* API for registering cooling devices. I took the entire series, that is why you see changes on drivers/hwmon in this pull (Guenter Roeck) - rockchip thermal driver gains support to PX30 SoC (Elaine Zhang) - the generic-adc thermal driver now considers the lookup table DT property as optional (Jean-Francois Dagenais) - Refactoring of tsens thermal driver (Amit Kucheria) - Cleanups on cpu cooling driver (Daniel Lezcano) - broadcom thermal driver dropped support to ACPI (Srinath Mannam) - tegra thermal driver gains support to OC hw throttle and GPU throtle (Wei Ni) - Fixes in several thermal drivers. * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: (59 commits) hwmon: (pwm-fan) Use devm_thermal_of_cooling_device_register hwmon: (npcm750-pwm-fan) Use devm_thermal_of_cooling_device_register hwmon: (mlxreg-fan) Use devm_thermal_of_cooling_device_register hwmon: (gpio-fan) Use devm_thermal_of_cooling_device_register hwmon: (aspeed-pwm-tacho) Use devm_thermal_of_cooling_device_register thermal: rcar_gen3_thermal: Fix to show correct trip points number thermal: rcar_thermal: update calculation formula for R-Car Gen3 SoCs thermal: cpu_cooling: Actually trace CPU load in thermal_power_cpu_get_power thermal: rockchip: Support the PX30 SoC in thermal driver dt-bindings: rockchip-thermal: Support the PX30 SoC compatible thermal: rockchip: fix up the tsadc pinctrl setting error thermal: broadcom: Remove ACPI support thermal: Fix build error of missing devm_ioremap_resource on UM thermal/drivers/cpu_cooling: Remove pointless field thermal/drivers/cpu_cooling: Add Software Package Data Exchange (SPDX) thermal/drivers/cpu_cooling: Fixup the header and copyright thermal/drivers/cpu_cooling: Remove pointless test in power2state() thermal: rcar_gen3_thermal: disable interrupt in .remove thermal: rcar_gen3_thermal: fix interrupt type thermal: Introduce devm_thermal_of_cooling_device_register ... | |||
| 2019-05-14 | hwmon: (pwm-fan) Use devm_thermal_of_cooling_device_register | Guenter Roeck | |
| Use devm_thermal_of_cooling_device_register() to register the cooling device. Also use devm_add_action_or_reset() to stop the fan on device removal, and to disable the pwm. Introduce a local 'dev' variable in the probe function to make the code easier to read. As a side effect, this fixes a bug seen if pwm_fan_of_get_cooling_data() returned an error. In that situation, the pwm was not disabled, and the fan was not stopped. Using devm functions also ensures that the pwm is disabled and that the fan is stopped only after the hwmon device has been unregistered. Cc: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> | |||
| 2019-04-15 | hwmon: (pwm-fan) Report probe errors consistently | Robin Murphy | |
| Printing the error code for a failure provides a head-start for debugging, since it's often sufficient to pinpoint the origin of the failure. We already do this for some probe-failure messages, so let's make the rest of them consistent. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> | |||
| 2019-04-15 | hwmon: (pwm-fan) Add RPM support via external interrupt | Stefan Wahren | |
| This adds RPM support to the pwm-fan driver in order to use with fancontrol/pwmconfig. This feature is intended for fans with a tachometer output signal, which generate a defined number of pulses per revolution. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> [groeck: Drop unused 'devattr' variable] Signed-off-by: Guenter Roeck <linux@roeck-us.net> | |||
| 2019-04-15 | hwmon: (pwm-fan) Disable PWM if fetching cooling data fails | Stefan Wahren | |
| In case pwm_fan_of_get_cooling_data() fails we should disable the PWM just like in the other error cases. Fixes: 2e5219c77183 ("hwmon: (pwm-fan) Read PWM FAN configuration from device tree") Cc: <stable@vger.kernel.org> # 4.14+ Reported-by: Guenter Rock <linux@roeck-us.net> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> | |||
| 2019-02-23 | hwmon: (pwm-fan) Add optional regulator support | Stefan Wahren | |
| This adds optional regulator support to the pwm-fan driver. This is necessary for pwm fans which are powered by a switchable supply. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> | |||
| 2018-12-16 | hwmon: (pwm-fan) Auto-convert to use SENSOR_DEVICE_ATTR_{RO, RW, WO} | Guenter Roeck | |
| Conversion was done done using the coccinelle script at https://github.com/groeck/coccinelle-patches/raw/master/hwmon/sensor-devattr-w6.cocci Signed-off-by: Guenter Roeck <linux@roeck-us.net> | |||
| 2018-10-10 | hwmon: (pwm-fan) Set fan speed to 0 on suspend | Thierry Reding | |
| Technically this is not required because disabling the PWM should be enough. However, when support for atomic operations was implemented in the PWM subsystem, only actual changes to the PWM channel are applied during pwm_config(), which means that during after resume from suspend the old settings won't be applied. One possible solution is for the PWM driver to implement its own PM operations such that settings from before suspend get applied on resume. This has the disadvantage of completely ignoring any particular ordering requirements that PWM user drivers might have, so it is best to leave it up to the user drivers to apply the settings that they want at the appropriate time. Another way to solve this would be to read back the current state of the PWM at the time of resume. That way, in case the configuration was lost during suspend, applying the old settings in PWM user drivers would actually get them applied because they differ from the current settings. However, not all PWM drivers support reading the hardware state, and not all hardware may support it. The best workaround at this point seems to be to let PWM user drivers tell the PWM subsystem that the PWM is turned off by, in addition to disabling it, also setting the duty cycle to 0. This causes the resume operation to apply a configuration that is different from the current configuration, resulting in the proper state from before suspend getting restored. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> | |||
| 2018-10-10 | hwmon: (pwm-fan) Silence error on probe deferral | Thierry Reding | |
| Probe deferrals aren't actual errors, so silence the error message in case the PWM cannot yet be acquired. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> | |||
| 2018-06-12 | treewide: devm_kzalloc() -> devm_kcalloc() | Kees Cook | |
| The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org> | |||
| 2017-06-11 | hwmon: (pwm-fan) Switch to new atomic PWM API | Bartlomiej Zolnierkiewicz | |
| Switch pwm-fan driver to new atomic PWM API. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> | |||
| 2016-05-17 | hwmon: pwm-fan: Use pwm_get_args() where appropriate | Boris Brezillon | |
| The PWM framework has clarified the concept of reference PWM config (the platform dependent config retrieved from the DT or the PWM lookup table) and real PWM state. Use pwm_get_args() when the PWM user wants to retrieve this reference config and not the current state. This is part of the rework allowing the PWM framework to support hardware readout and expose real PWM state even when the PWM has just been requested (before the user calls pwm_config/enable/disable()). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> | |||
| 2015-09-20 | hwmon: (pwm-fan) Fix module autoload for OF platform driver | Luis de Bethencourt | |
| This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> | |||
| 2015-04-12 | hwmon: (pwm-fan) Update the duty cycle inorder to control the pwm-fan | Anand Moon | |
| pwm_config() must be called with a duty cycle of 0 prior to calling pwm_disable() to ensure that the pwm signal is set to low. Reported-by: Markus Reichl <m.reichl@fivetechno.de> Tested-by: Markus Reichl <m.reichl@fivetechno.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> | |||
| 2015-03-16 | hwmon: (pwm-fan, vexpress) Constify of_device_id array | Fabian Frederick | |
| of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Guenter Roeck <linux@roeck-us.net> | |||
| 2015-03-09 | hwmon: (pwm-fan) Declare pwm_fan_of_get_cooling_data static | Guenter Roeck | |
| Address the following sparse warnings. drivers/hwmon/pwm-fan.c:176:5: warning: symbol 'pwm_fan_of_get_cooling_data' was not declared. Should it be static? drivers/hwmon/pwm-fan.c:176:5: warning: no previous prototype for 'pwm_fan_of_get_cooling_data' pwm_fan_of_get_cooling_data is only used in the pwm-fan driver and thus should be declared static. Cc: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> | |||
| 2015-03-09 | hwmon: (pwm-fan) Add support for using PWM FAN as a cooling device | Lukasz Majewski | |
| The PWM FAN device can now be used as a thermal cooling device. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> | |||
| 2015-03-09 | hwmon: (pwm-fan) Read PWM FAN configuration from device tree | Lukasz Majewski | |
| This patch provides code for reading PWM FAN configuration data via device tree. The pwm-fan can work with full speed when configuration is not provided. However, errors are propagated when wrong DT bindings are found. Additionally the struct pwm_fan_ctx has been extended. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> | |||
| 2015-03-09 | hwmon: (pwm-fan) Extract __set_pwm() function to only modify PWM duty cycle | Lukasz Majewski | |
| It was necessary to decouple code handling writing to sysfs from the one responsible for setting PWM of the fan. Due to that, new __set_pwm() method was extracted, which is responsible for only setting new PWM duty cycle. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> | |||
| 2014-11-11 | hwmon: (pwm-fan) Fix suspend/resume behavior | Kamil Debski | |
| The state of a PWM output is not clearly defined after resume. Some PWM drivers do not restore the duty cycle upon resume, thus it is necessary to manually restore the correct value. Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> | |||
| 2014-08-04 | hwmon: (pwm-fan) Remove duplicate dev_set_drvdata call | Axel Lin | |
| The dev_set_drvdata() call is equivalent to the platform_set_drvdata() call in next line. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> | |||
| 2014-08-04 | hwmon: Add pwm-fan driver | Kamil Debski | |
| The pwm-fan driver enables control of fans connected to PWM lines. This driver uses the PWM framework, so it is compatible with all PWM devices that provide drivers through the PWM framework. Signed-off-by: Kamil Debski <k.debski@samsung.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Reviewed-by: Tobias Klauser <tklauser@distanz.ch> [Guenter Roeck: Last argument to devm_of_pwm_get is pointer, use NULL] Signed-off-by: Guenter Roeck <linux@roeck-us.net> | |||
 |
index : linux-arm.git | |
| Russell King's ARM Linux kernel tree | Russell King |
| summaryrefslogtreecommitdiff |