Age | Commit message (Collapse) | Author |
|
When the lock bit inside SCH5627_REG_CTRL is set, then the virtual
registers become read-only until the next power cycle.
Disallow write access to those registers in such a case.
Tested on a Fujitsu Esprimo P720.
Fixes: aa9f833dfc12 ("hwmon: (sch5627) Add pwmX_auto_channels_temp support")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230907052639.16491-3-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Use bit macros then accessing SCH5627_REG_CTRL, so that people
do not need to look at the datasheet to find out what each bit
does.
Tested on a Fujitsu Esprimo P720.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230907052639.16491-2-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Simplify tmp51x_read_properties() by replacing 'nfactor' ->'data->nfactor'
in device_property_read_u32_array() and drop the local variable as it is
unused.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230907071404.24334-3-biju.das.jz@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The tmp512 chip has 3 channels whereas tmp513 has 4 channels. Avoid
using tmp51x_ids for this HW difference by replacing OF/ID table
data with maximum channels supported by the device.
Replace id->max_channels variable from struct tmp51x_data and drop the
macros TMP51{2,3}_TEMP_CONFIG_DEFAULT as it can be derived from the macro
TMP51X_TEMP_CONFIG_DEFAULT and update the logic in tmp51x_is_visible(),
tmp51x_read_properties() and tmp51x_init() using max_channels.
While at it, drop enum tmp51x_ids as there is no user and remove
trailing comma in the terminator entry for OF table.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230907071404.24334-2-biju.das.jz@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
TDA38640 can operate in either PMBus mode or SVID mode.
In SVID mode, by design ENABLE pin is the only option for controlling
the output rail i.e., ENABLE pin is chained to power good of another
reglator & FPGA.
In cases where the chip is configured for SVID mode, and the ENABLE pin
is set at a fixed level or is left unconnected (with an internal
pull-down), while requiring software control, the following
workaround is necessary.
The workaround utilizes ENABLE pin polarity flipping to control
output rail.
If property 'infineon,en-pin-fixed-level' is specified then
determine if chip is in SVID mode by checking BIT15 of MTP memory offset
0x44 as described in the datasheet.
If chip is in SVID mode then apply the workaround by
1. Determine EN pin level
2. Maps BIT7 of OPERATION(01h) to EN_PIN_POLARITY(BIT1) of
PB_ON_OFF_CONFIG.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Link: https://lore.kernel.org/r/20230831190731.265099-3-Naresh.Solanki@9elements.com
[groeck: Dropped unnecessary line continuation]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add bits found in the ON_OFF_CONFIG register.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Link: https://lore.kernel.org/r/20230831190731.265099-2-Naresh.Solanki@9elements.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
POWER-Z is a series of devices to monitor power characteristics of
USB-C connections and display those on a on-device display.
Some of the devices, notably KM002C and KM003C, contain an additional
port which exposes the measurements via USB.
This is a driver for this monitor port.
It was developed and tested with the KM003C.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20230902-powerz-v4-1-7ec2c1440687@weissschuh.net
[groeck:
Release urb after hwmon registration error;
Move priv->status initialization to correct place before reinit_completion
]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The PGOOD fix was intended for MP2973 & MP2971 & not for MP2975.
Fixes: acda945afb46 ("hwmon: (pmbus/mp2975) Fix PGOOD in READ_STATUS_WORD")
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Link: https://lore.kernel.org/r/20231027103352.918895-1-naresh.solanki@9elements.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
devices"
This reverts commit 393935baa45e5ccb9603cf7f9f020ed1bc0915f7.
As reported by Ian Nartowicz, this and the next patch
result in a failure to load the driver on Celsius W280.
While the alternative would be to add the board to the DMI
override table, it is quite likely that other systems are
also affected. Revert the offending patches to avoid future
problems.
Fixes: 393935baa45e ("hwmon: (sch56xx-common) Add automatic module loading on supported devices")
Reported-by: Ian Nartowicz <deadbeef@nartowicz.co.uk>
Closes: https://lore.kernel.org/linux-hwmon/20231025192239.3c5389ae@debian.org/T/#t
Cc: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This reverts commit fd2d53c367ae9983c2100ac733a834e0c79d7537.
As reported by Ian Nartowicz, this and the preceding patch
result in a failure to load the driver on Celsius W280.
While the alternative would be to add the board to the DMI
override table, it is quite likely that other systems are
also affected. Revert the offending patches to avoid future
problems.
Fixes: fd2d53c367ae ("hwmon: (sch56xx-common) Add DMI override table")
Reported-by: Ian Nartowicz <deadbeef@nartowicz.co.uk>
Closes: https://lore.kernel.org/linux-hwmon/20231025192239.3c5389ae@debian.org/T/#t
Cc: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
In the regmap conversion in commit 4ef2774511dc ("hwmon: (nct6775)
Convert register access to regmap API") I reused the 'reg' variable
for all three register reads in the fan speed calculation loop in
nct6775_update_device(), but failed to notice that the value from the
first one (data->REG_FAN[i]) is actually used in the call to
nct6775_select_fan_div() at the end of the loop body. Since that
patch the register value passed to nct6775_select_fan_div() has been
(conditionally) incorrectly clobbered with the value of a different
register than intended, which has in at least some cases resulted in
fan speeds being adjusted down to zero.
Fix this by using dedicated temporaries for the two intermediate
register reads instead of 'reg'.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Fixes: 4ef2774511dc ("hwmon: (nct6775) Convert register access to regmap API")
Reported-by: Thomas Zajic <zlatko@gmx.at>
Tested-by: Thomas Zajic <zlatko@gmx.at>
Cc: stable@vger.kernel.org # v5.19+
Link: https://lore.kernel.org/r/20230929200822.964-2-zev@bewilderbeest.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
When build with W=1 and "-Werror=format-truncation", below error is
observed in coretemp driver,
drivers/hwmon/coretemp.c: In function 'create_core_data':
>> drivers/hwmon/coretemp.c:393:34: error: '%s' directive output may be truncated writing likely 5 or more bytes into a region of size between 3 and 13 [-Werror=format-truncation=]
393 | "temp%d_%s", attr_no, suffixes[i]);
| ^~
drivers/hwmon/coretemp.c:393:26: note: assuming directive output of 5 bytes
393 | "temp%d_%s", attr_no, suffixes[i]);
| ^~~~~~~~~~~
drivers/hwmon/coretemp.c:392:17: note: 'snprintf' output 7 or more bytes (assuming 22) into a destination of size 19
392 | snprintf(tdata->attr_name[i], CORETEMP_NAME_LENGTH,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
393 | "temp%d_%s", attr_no, suffixes[i]);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Given that
1. '%d' could take 10 charactors,
2. '%s' could take 10 charactors ("crit_alarm"),
3. "temp", "_" and the NULL terminator take 6 charactors,
fix the problem by increasing CORETEMP_NAME_LENGTH to 28.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Fixes: 7108b80a542b ("hwmon/coretemp: Handle large core ID value")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310200443.iD3tUbbK-lkp@intel.com/
Link: https://lore.kernel.org/r/20231025122316.836400-1-rui.zhang@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
axi_fan_control_irq_handler(), dependent on the private
axi_fan_control_data structure, might be called before the hwmon
device is registered. That will cause an "Unable to handle kernel
NULL pointer dereference" error.
Fixes: 8412b410fa5e ("hwmon: Support ADI Fan Control IP")
Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231025132100.649499-1-nuno.sa@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
`strncpy` is deprecated for use on NUL-terminated destination strings [1].
Let's refactor this kcalloc() + strncpy() into a kmemdup_nul() which has
more obvious behavior and is less error prone.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230926-strncpy-drivers-hwmon-acpi_power_meter-c-v5-1-3fc31a9daf99@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Use the provided topology helper function instead of fiddling in cpu_data.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230814085112.506988471@linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux
Merge ACPI PCC changes for v6.7 from Sudeep Holla:
"ACPI: PCC: Mailbox and generic updates for v6.7
Main updates include:
1. Addition of support for Type 4 PCC subspace that enables platform
notification handling (Huisong Li).
2. Support for the shared interrupt amongst multiple PCC subspaces/
channels (Huisong Li).
3. Consolidation of PCC shared memory region command and status
bitfields definitions that were duplicated and scattered across
multiple PCC client drivers (Sudeep Holla)."
* tag 'acpi-pcc-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
soc: kunpeng_hccs: Migrate to use generic PCC shmem related macros
hwmon: (xgene) Migrate to use generic PCC shmem related macros
i2c: xgene-slimpro: Migrate to use generic PCC shmem related macros
ACPI: PCC: Add PCC shared memory region command and status bitfields
mailbox: pcc: Support shared interrupt for multiple subspaces
mailbox: pcc: Add support for platform notification handling
|
|
`strncpy` is deprecated for use on NUL-terminated destination strings [1].
We should prefer more robust and less ambiguous string interfaces.
A suitable replacement is `strscpy` [2] due to the fact that it
guarantees NUL-termination on the destination buffer without
unnecessarily NUL-padding. If, for any reason, NUL-padding is needed
let's opt for `strscpy_pad`.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230914-strncpy-drivers-hwmon-asus_wmi_sensors-c-v1-1-e1703cf91693@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
`strncpy` is deprecated for use on NUL-terminated destination strings [1].
A suitable replacement is `memcpy` as we've already precisely calculated
the number of bytes to copy while `buf` has been explicitly
zero-initialized:
| char buf[8] = { 0 };
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230919-strncpy-drivers-hwmon-ibmpowernv-c-v2-1-37d3e64172bc@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Use the newly defined common and generic PCC shared memory region
related macros in this driver to replace the locally defined ones.
Cc: Jean Delvare <jdelvare@suse.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230927-pcc_defines-v2-3-0b8ffeaef2e5@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Skip non-existent ALARM attribute to avoid a shift-out-of-bounds
dmesg warning.
Reported-by: Doug Smythies <dsmythies@telus.net>
Closes: https://lore.kernel.org/linux-hwmon/ZQVzdlHgWdFhOVyQ@debian.me/T/#mc69b690660eb50734a6b07506d74a119e0266f1b
Fixes: b7f1f7b2523a ("hwmon: (nct6775) Additional TEMP registers for nct6799")
Signed-off-by: Ahmad Khalifa <ahmad@khalifa.ws>
Link: https://lore.kernel.org/r/20230918184722.2033225-1-ahmad@khalifa.ws
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
changes for 6.6-rc1.
Stuff all over the place here, lots of driver updates and changes and
new additions. Short summary is:
- new IIO drivers and updates
- Interconnect driver updates
- fpga driver updates and additions
- fsi driver updates
- mei driver updates
- coresight driver updates
- nvmem driver updates
- counter driver updates
- lots of smaller misc and char driver updates and additions
All of these have been in linux-next for a long time with no reported
problems"
* tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (267 commits)
nvmem: core: Notify when a new layout is registered
nvmem: core: Do not open-code existing functions
nvmem: core: Return NULL when no nvmem layout is found
nvmem: core: Create all cells before adding the nvmem device
nvmem: u-boot-env:: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
nvmem: sec-qfprom: Add Qualcomm secure QFPROM support
dt-bindings: nvmem: sec-qfprom: Add bindings for secure qfprom
dt-bindings: nvmem: Add compatible for QCM2290
nvmem: Kconfig: Fix typo "drive" -> "driver"
nvmem: Explicitly include correct DT includes
nvmem: add new NXP QorIQ eFuse driver
dt-bindings: nvmem: Add t1023-sfp efuse support
dt-bindings: nvmem: qfprom: Add compatible for MSM8226
nvmem: uniphier: Use devm_platform_get_and_ioremap_resource()
nvmem: qfprom: do some cleanup
nvmem: stm32-romem: Use devm_platform_get_and_ioremap_resource()
nvmem: rockchip-efuse: Use devm_platform_get_and_ioremap_resource()
nvmem: meson-mx-efuse: Convert to devm_platform_ioremap_resource()
nvmem: lpc18xx_otp: Convert to devm_platform_ioremap_resource()
nvmem: brcm_nvram: Use devm_platform_get_and_ioremap_resource()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Renesas HS3001
Chip support added to existing drivers:
- pmbus/mp2975 driver now supports MP2971 and MP2973
Functional improvements:
- Additional voltage and temperature sensor support for
NCT6798/NCT6799 in nt6755 driver
- it87 driver now detects AMDTSI sensor type
- dimmtemp now supports more than 32 DIMMs
Driver removals:
- sm665 driver removed as unsupportable and long since obsolete
.. and minor fixes, cleanups, and simplifications in several drivers"
* tag 'hwmon-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (57 commits)
hwmon: (tmp513) Simplify probe()
hwmon: (tmp513) Fix the channel number in tmp51x_is_visible()
hwmon: (mlxreg-fan) Extend number of supported fans
hwmon: (sis5595) Do PCI error checks on own line
hwmon: (vt8231) Do PCI error checks on own line
hwmon: (via686a) Do PCI error checks on own line
hwmon: pmbus: Fix -EIO seen on pli1209
hwmon: pmbus: Drop unnecessary clear fault page
hwmon: pmbus: Reduce clear fault page invocations
hwmon: (nsa320-hwmon) Remove redundant of_match_ptr()
hwmon: (pmbus/ucd9200) fix Wvoid-pointer-to-enum-cast warning
hwmon: (pmbus/ucd9000) fix Wvoid-pointer-to-enum-cast warning
hwmon: (pmbus/tps53679) fix Wvoid-pointer-to-enum-cast warning
hwmon: (pmbus/ibm-cffps) fix Wvoid-pointer-to-enum-cast warning
hwmon: (tmp513) fix Wvoid-pointer-to-enum-cast warning
hwmon: (max6697) fix Wvoid-pointer-to-enum-cast warning
hwmon: (max20730) fix Wvoid-pointer-to-enum-cast warning
hwmon: (lm90) fix Wvoid-pointer-to-enum-cast warning
hwmon: (lm85) fix Wvoid-pointer-to-enum-cast warning
hwmon: (lm75) fix Wvoid-pointer-to-enum-cast warning
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Borislav Petkov:
- Add PCI device IDs for a new AMD family 0x1a CPUs and use them in the
respective drivers
- Update HPE Superdome Flex maintainers list
* tag 'x86_misc_for_v6.6_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/uv: Update HPE Superdome Flex Maintainers
EDAC/amd64: Add support for AMD family 1Ah models 00h-1Fh and 40h-4Fh
hwmon: (k10temp) Add thermal support for AMD Family 1Ah-based models
x86/amd_nb: Add PCI IDs for AMD Family 1Ah-based models
|
|
Simpilfy probe() by replacing device_get_match_data() and id lookup for
retrieving match data by i2c_get_match_data().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230824204456.401580-3-biju.das.jz@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The supported channels for this driver are {0..3}. Fix the incorrect
channel in tmp51x_is_visible().
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/all/ea0eccc0-a29f-41e4-9049-a1a13f8b16f1@roeck-us.net/
Fixes: 59dfa75e5d82 ("hwmon: Add driver for Texas Instruments TMP512/513 sensor chips.")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230824204456.401580-2-biju.das.jz@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Some new big modular systems can be equipped with up to 24 fans.
Extend maximum number of fans accordingly.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20230824164006.26868-1-vadimp@nvidia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Instead of if conditions with line splits, use the usual error handling
pattern with a separate variable to improve readability. Handle error
print with a label instead of trying to chain everything into a single
if condition.
No functional changes intended.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230824132832.78705-14-ilpo.jarvinen@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Instead of if conditions with line splits, use the usual error handling
pattern with a separate variable to improve readability.
No functional changes intended.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230824132832.78705-7-ilpo.jarvinen@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Instead of if conditions with line splits, use the usual error handling
pattern with a separate variable to improve readability.
No functional changes intended.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230824132832.78705-6-ilpo.jarvinen@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
After doing performance optimizations the pli1209 driver failed to
probe with a probabilty of 2%. It wasn't able to read the PMBUS_OPERATION
register due to an -EIO error.
An investigation showed that the PLI1209 takes 230 usec to execute the
CLEAR_FAULTS command. During that time it's busy and NACKs all requests
on the SMBUS interface. It also NACKs reads on PMBUS_STATUS_BYTE
making it impossible to poll the BUSY flag.
Add a custom write_data function to just wait for not BUSY unconditionally
after sending a CLEAR_FAULTS command.
TEST: Verified using an I2C bus analyser that no more NACKs are seen after
sending a CLEAR_FAULTS command.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Link: https://lore.kernel.org/r/20230817092527.808631-3-Naresh.Solanki@9elements.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The pmbus_check_byte_register function already calls clear
fault page, so there's no need to do it again in
pmbus_identify_common.
TEST: Verified using an I2C bus analyser to confirm that only
one clear fault page is being send instead of two in a row.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Link: https://lore.kernel.org/r/20230817092527.808631-2-Naresh.Solanki@9elements.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Observing I2C traffic revealed consecutive transmission of CLEAR_FAULT
commands. While this doesn't cause issues, it extends driver probe time.
Avoid invoking pmbus_clear_fault_page for virtual registers, as they're
managed by the driver, not the chip.
TEST: Verified using an I2C bus analyzer that only one CLEAR_FAULT
command is send instead 5 in a row.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Link: https://lore.kernel.org/r/20230817092527.808631-1-Naresh.Solanki@9elements.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The driver depends on CONFIG_OF, it is not necessary to use
of_match_ptr() here.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230810062635.1947552-1-ruanjinjie@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
'chip' is an enum, thus cast of pointer on 64-bit compile test with W=1
causes:
ucd9200.c:106:10: error: cast to smaller integer type 'enum chips' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230810093157.94244-15-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
'chip' is an enum, thus cast of pointer on 64-bit compile test with W=1
causes:
ucd9000.c:591:10: error: cast to smaller integer type 'enum chips' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230810093157.94244-14-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
'chip_id' is an enum, thus cast of pointer on 64-bit compile test with W=1
causes:
tps53679.c:238:13: error: cast to smaller integer type 'enum chips' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230810093157.94244-13-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
'vs' is an enum, thus cast of pointer on 64-bit compile test with W=1
causes:
ibm-cffps.c:492:8: error: cast to smaller integer type 'enum versions' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230810093157.94244-12-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
'id' is an enum, thus cast of pointer on 64-bit compile test with W=1
causes:
tmp513.c:724:14: error: cast to smaller integer type 'enum tmp51x_ids' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230810093157.94244-11-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
'type' is an enum, thus cast of pointer on 64-bit compile test with W=1
causes:
max6697.c:705:16: error: cast to smaller integer type 'enum chips' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230810093157.94244-10-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
'chip_id' is an enum, thus cast of pointer on 64-bit compile test with W=1
causes:
max20730.c:719:13: error: cast to smaller integer type 'enum chips' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230810093157.94244-9-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
'kind' is an enum, thus cast of pointer on 64-bit compile test with W=1
causes:
lm90.c:2768:16: error: cast to smaller integer type 'enum chips' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230810093157.94244-8-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
'type' is an enum, thus cast of pointer on 64-bit compile test with W=1
causes:
lm85.c:1562:16: error: cast to smaller integer type 'enum chips' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230810093157.94244-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
'kind' is an enum, thus cast of pointer on 64-bit compile test with W=1
causes:
lm75.c:581:10: error: cast to smaller integer type 'enum lm75_type' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230810093157.94244-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
'kind' is an enum, thus cast of pointer on 64-bit compile test with W=1
causes:
lm63.c:1108:16: error: cast to smaller integer type 'enum chips' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230810093157.94244-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
'chip' is an enum, thus cast of pointer on 64-bit compile test with W=1
causes:
ina2xx.c:627:10: error: cast to smaller integer type 'enum ina2xx_ids' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230810093157.94244-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
'chip' is an enum, thus cast of pointer on 64-bit compile test with W=1
causes:
ads7828.c:142:10: error: cast to smaller integer type 'enum ads7828_chips' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230810093157.94244-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
'type' is an enum, thus cast of pointer on 64-bit compile test with W=1
causes:
ad7418.c:256:16: error: cast to smaller integer type 'enum chips' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230810093157.94244-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
'chip' is an enum, thus cast of pointer on 64-bit compile test with W=1
causes:
adt7475.c:1655:10: error: cast to smaller integer type 'enum chips' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230810093157.94244-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Use maxim,max6639 as compatible string for the driver.
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Link: https://lore.kernel.org/r/20230803144401.1151065-2-Naresh.Solanki@9elements.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Additional TEMP registers for nct6798d, nct6799d-r and nct6796d-s
This allows the max/max_hyst/crit attributes to be shown/stored
* Increase NUM_TEMP from 10 to 12
* Separate TEMP/MON_TEMP/OVER/HYST/CRIT registers
* Rename "PECI Calibration" to include "TSI" too
* Update ALARM/BEEP bits for temps for 6799
* For 6799, keep temp_fixed_num at 6, but increase
num_temp_alarms/num_temp_beeps to 7/8
Tested with NCT6799D-R showing additional sysfs attributes:
* temp3-temp8: max/max_hyst/beep/alarm
* temp3-temp6: crit/offset
Signed-off-by: Ahmad Khalifa <ahmad@khalifa.ws>
Link: https://lore.kernel.org/r/20230802185820.3642399-1-ahmad@khalifa.ws
[groeck: Addressed cosmetic checkpatch complaints]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|