summaryrefslogtreecommitdiff
path: root/drivers/hwspinlock
AgeCommit message (Collapse)Author
2017-11-17Merge tag 'hwlock-v4.15' of git://github.com/andersson/remoteprocLinus Torvalds
Pull hwspinlock update from Bjorn Andersson: "This changes the HWSPINLOCK core Kconfig option to bool, to aid when other core code depends on it" * tag 'hwlock-v4.15' of git://github.com/andersson/remoteproc: hwspinlock: Change hwspinlock to a bool
2017-11-06hwspinlock: Change hwspinlock to a boolBaolin Wang
Change hwspinlock to a bool in case some drivers will meet dependency issue when hwspinlock is built as a module. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-17hwspinlock: sprd: Add hardware spinlock driverBaolin Wang
The Spreadtrum hardware spinlock device can provide hardware assistance for synchronization between the multiple subsystems. Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-05-17Make HWSPINLOCK a menuconfig to ease disablingVincent Legoll
So that there's no need to get into the submenu to disable all related config entries. Signed-off-by: Vincent Legoll <vincent.legoll@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-07-06hwspinlock: qcom_hwspinlock: add missing of_node_put after calling ↵Peter Chen
of_parse_phandle of_node_put needs to be called when the device node which is got from of_parse_phandle has finished using. Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-05-20drivers/hwspinlock: use correct radix tree APIMatthew Wilcox
radix_tree_is_indirect_ptr() is an internal API. The correct call to use is radix_tree_deref_retry() which has the appropriate unlikely() annotation. Fixes: c6400ba7e13a ("drivers/hwspinlock: fix race between radix tree insertion and lookup") Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com> Cc: Jan Kara <jack@suse.com> Cc: Neil Brown <neilb@suse.de> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-03drivers/hwspinlock: fix race between radix tree insertion and lookupMatthew Wilcox
of_hwspin_lock_get_id() is protected by the RCU lock, which means that insertions can occur simultaneously with the lookup. If the radix tree transitions from a height of 0, we can see a slot with the indirect_ptr bit set, which will cause us to at least read random memory, and could cause other havoc. Fix this by using the newly introduced radix_tree_iter_retry(). Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-01hwspinlock: qcom: Correct msb in regmap_fieldBjorn Andersson
msb of the regmap_field was mistakenly given the value 32, to set all bits in the regmap update mask; although incorrect this worked until 921cc294, where the mask calculation was corrected. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2015-06-12hwspinlock: add a CSR atlas7 driverWei Chen
Add hwspinlock support for the CSR atlas7 SoC. The Hardware Spinlock device on atlas7 provides hardware assistance for synchronization between the multiple processors in the system (dual Cortex-A7, CAN bus Cortex-M3 and audio DSP). Reviewed-by: Suman Anna <s-anna@ti.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Wei Chen <wei.chen@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2015-05-02hwspinlock: qcom: Add support for Qualcomm HW Mutex blockBjorn Andersson
Add driver for Qualcomm Hardware Mutex block found in many Qualcomm SoCs. Based on initial effort by Kumar Gala <galak@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Reviewed-by: Andy Gross <agross@codeaurora.org> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2015-05-02hwspinlock/omap: add support for dt nodesSuman Anna
HwSpinlock IP is present only on OMAP4 and other newer SoCs, which are all device-tree boot only. This patch adds the base support for parsing the DT nodes, and removes the code dealing with the traditional platform device instantiation. Signed-off-by: Suman Anna <s-anna@ti.com> [tony@atomide.com: ack for legacy file removal] Acked-by: Tony Lindgren <tony@atomide.com> [comment on the imperfect always-zero base_id] Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2015-05-02hwspinlock/core: add device tree supportSuman Anna
This patch adds a new OF-friendly API of_hwspin_lock_get_id() for hwspinlock clients to use/request locks from a hwspinlock device instantiated through a device-tree blob. This new API can be used by hwspinlock clients to get the id for a specific lock using the phandle + args specifier, so that it can be requested using the available hwspin_lock_request_specific() API. Signed-off-by: Suman Anna <s-anna@ti.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> [small comment clarification] Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2014-10-20hwspinlock: drop owner assignment from platform_driversWolfram Sang
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-07-29hwspinlock: enable OMAP build for AM33xx, AM43xx & DRA7xxSuman Anna
HwSpinlocks are supported on TI's AM33xx, AM43xx and DRA7xx SoC device families as well. The IPs are identical to that of OMAP4/OMAP5, except for the number of locks. Add a depends on to the above family of SoCs to enable the build support for OMAP hwspinlock driver for any of the above SoC configs. Signed-off-by: Suman Anna <s-anna@ti.com> [small commit log changes] Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2014-07-29hwspinlock/omap: enable module before reading SYSSTATUS registerSuman Anna
The number of hwspinlocks are determined based on the value read from the IP block's SYSSTATUS register. However, the module may not be enabled and clocked, and the read may result in a bus error. This particular issue is seen rather easily on AM33XX, since the module wakeup is software controlled, and it is disabled out of reset. Make sure the module is enabled and clocked before reading the SYSSTATUS register. Signed-off-by: Suman Anna <s-anna@ti.com> [replace pm_runtime_put_sync with lenient pm_runtime_put] Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2013-05-07Merge tag 'hwspinlock-3.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ohad/hwspinlock Pullhwspinlock update from Ohad Ben-Cohen: "A single patch from Vincent extending OMAP's hwspinlock support to OMAP5" * tag 'hwspinlock-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/hwspinlock: hwspinlock/omap: support OMAP5 as well
2013-04-05hwspinlock: fix __hwspin_lock_request error pathLi Fei
Even in failed case of pm_runtime_get_sync, the usage_count is incremented. In order to keep the usage_count with correct value and runtime power management to behave correctly, call pm_runtime_put_noidle in such case. In __hwspin_lock_request, module_put is also called before return in pm_runtime_get_sync failed case. Cc: stable@vger.kernel.org Signed-off-by Liu Chuansheng <chuansheng.liu@intel.com> Signed-off-by: Li Fei <fei.li@intel.com> [edit commit log] Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2013-04-05hwspinlock/omap: support OMAP5 as wellVincent Stehlé
OMAP5 has spinlocks, too. Signed-off-by: Vincent Stehlé <v-stehle@ti.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2012-11-28hwspinlock: remove use of __devexitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28hwspinlock: remove use of __devinitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28hwspinlock: remove use of __devexit_pBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-10hwspinlock/core: move the dereference below the NULL testWei Yongjun
The dereference should be moved below the NULL test. spatch with a semantic match is used to found this. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2012-07-07hwspinlock/core: use global ID to register hwspinlocks on multiple devicesShinya Kuribayashi
Commit 300bab9770 (hwspinlock/core: register a bank of hwspinlocks in a single API call, 2011-09-06) introduced 'hwspin_lock_register_single()' to register numerous (a bank of) hwspinlock instances in a single API, 'hwspin_lock_register()'. At which time, 'hwspin_lock_register()' accidentally passes 'local IDs' to 'hwspin_lock_register_single()', despite that ..._single() requires 'global IDs' to register hwspinlocks. We have to convert into global IDs by supplying the missing 'base_id'. Cc: stable <stable@vger.kernel.org> Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> [ohad: fix error path of hwspin_lock_register, too] Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2011-11-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: drivers/media: video/a5k6aa is a module and so needs module.h mfd: fix build failures in recently added ab5500 code hwspinlock/u8500: include linux/module.h MTD: MAPS: bcm963xx-flash.c: explicitly include module.h
2011-11-08hwspinlock/u8500: fix build error due to undefined labelAxel Lin
Fix below build error: CC drivers/hwspinlock/u8500_hsem.o drivers/hwspinlock/u8500_hsem.c: In function 'u8500_hsem_probe': drivers/hwspinlock/u8500_hsem.c:113: error: label 'free_state' used but not defined Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2011-11-07hwspinlock/u8500: include linux/module.hAxel Lin
Include module.h to fix below build error: CC drivers/hwspinlock/u8500_hsem.o drivers/hwspinlock/u8500_hsem.c:177: error: 'THIS_MODULE' undeclared here (not in a function) [...] drivers/hwspinlock/u8500_hsem.c:196: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/hwspinlock/u8500_hsem.c:196: warning: function declaration isn't a prototype make[2]: *** [drivers/hwspinlock/u8500_hsem.o] Error 1 make[1]: *** [drivers/hwspinlock] Error 2 make: *** [drivers] Error 2 Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-21hwspinlock/omap: omap_hwspinlock_remove should be __devexitOhad Ben-Cohen
Mark omap_hwspinlock_remove with __devexit (and use __devexit_p appropriately) so the function can be discarded when the conditions are met. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2011-09-21hwspinlock/u8500: add hwspinlock driverMathieu J. Poirier
Add hwspinlock driver for U8500's Hsem hardware. At this point only HSem's protocol 1 is used (i.e. no interrupts). Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> [ohad@wizery.com: adopt recent hwspin_lock_{un}register API changes] [ohad@wizery.com: set the owner member of the driver] [ohad@wizery.com: mark ->remove() function as __devexit] [ohad@wizery.com: write commit log] [ohad@wizery.com: small cleanups] Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2011-09-21hwspinlock/core: register a bank of hwspinlocks in a single API callOhad Ben-Cohen
Hardware Spinlock devices usually contain numerous locks (known devices today support between 32 to 256 locks). Originally hwspinlock core required drivers to register (and later, when needed, unregister) each lock separately. That worked, but required hwspinlocks drivers to do a bit extra work when they were probed/removed. This patch changes hwspin_lock_{un}register() to allow a bank of hwspinlocks to be {un}registered in a single invocation. A new 'struct hwspinlock_device', which contains an array of 'struct hwspinlock's is now being passed to the core upon registration (so instead of wrapping each struct hwspinlock, a priv member has been added to allow drivers to piggyback their private data with each hwspinlock). While at it, several per-lock members were moved to be per-device: 1. struct device *dev 2. struct hwspinlock_ops *ops In addition, now that the array of locks is handled by the core, there's no reason to maintain a per-lock 'int id' member: the id of the lock anyway equals to its index in the bank's array plus the bank's base_id. Remove this per-lock id member too, and instead use a simple pointers arithmetic to derive it. As a result of this change, hwspinlocks drivers are now simpler and smaller (about %20 code reduction) and the memory footprint of the hwspinlock framework is reduced. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2011-09-21hwspinlock/core: use a mutex to protect the radix treeJuan Gutierrez
Since we're using non-atomic radix tree allocations, we should be protecting the tree using a mutex and not a spinlock. Non-atomic allocations and process context locking is good enough, as the tree is manipulated only when locks are registered/ unregistered/requested/freed. The locks themselves are still protected by spinlocks of course, and mutexes are not involved in the locking/unlocking paths. Cc: <stable@kernel.org> Signed-off-by: Juan Gutierrez <jgutierrez@ti.com> [ohad@wizery.com: rewrite the commit log, #include mutex.h, add minor commentary] [ohad@wizery.com: update register/unregister parts in hwspinlock.txt] Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2011-09-21hwspinlock/core/omap: fix id issues on multiple hwspinlock devicesOhad Ben-Cohen
hwspinlock devices provide system-wide hardware locks that are used by remote processors that have no other way to achieve synchronization. To achieve that, each physical lock must have a system-wide id number that is agreed upon, otherwise remote processors can't possibly assume they're using the same hardware lock. Usually boards have a single hwspinlock device, which provides several hwspinlocks, and in this case, they can be trivially numbered 0 to (num-of-locks - 1). In case boards have several hwspinlocks devices, a different base id should be used for each hwspinlock device (they can't all use 0 as a starting id!). While this is certainly not common, it's just plain wrong to just silently use 0 as a base id whenever the hwspinlock driver is probed. This patch provides a hwspinlock_pdata structure, that boards can use to set a different base id for each of the hwspinlock devices they may have, and demonstrates how to use it with the omap hwspinlock driver. While we're at it, make sure the hwspinlock core prints an explicit error message in case an hwspinlock is registered with an id number that already exists; this will help users catch such base id issues. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Acked-by: Tony Lindgren <tony@atomide.com>
2011-09-21hwspinlock/omap: simplify allocation schemeOhad Ben-Cohen
Instead of allocating every hwspinlock separately, allocate them all in one shot. This both simplifies the driver and helps achieving better slab utilization. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2011-09-21hwspinlock/core: simplify 'owner' handlingOhad Ben-Cohen
Use struct device_driver's owner member instead of asking drivers to explicitly pass the owner again. This simplifies drivers and also save some memory, since there's no point now in maintaining a separate owner pointer per hwspinlock. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2011-09-21hwspinlock/core: simplify KconfigOhad Ben-Cohen
Simplify hwspinlock's Kconfig by making the global CONFIG_HWSPINLOCK entry invisible; users will just select it when needed. This also prepares the ground for adding hwspinlock support for other platforms (the 'depends on ARCH_OMAP4' was rather hideous, and while we're at it, a dedicated menu is added). Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2011-03-18hwspinlock: depend on OMAP4Ohad Ben-Cohen
Currently only OMAP4 supports hwspinlocks, so don't bother asking anyone else. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-17drivers: hwspinlock: add OMAP implementationSimon Que
Add hwspinlock support for the OMAP4 Hardware Spinlock device. The Hardware Spinlock device on OMAP4 provides hardware assistance for synchronization between the multiple processors in the system (dual Cortex-A9, dual Cortex-M3 and a C64x+ DSP). [ohad@wizery.com: adapt to hwspinlock framework, tidy up] Signed-off-by: Simon Que <sque@ti.com> Signed-off-by: Hari Kanigeri <h-kanigeri2@ti.com> Signed-off-by: Krishnamoorthy, Balaji T <balajitk@ti.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Paul Walmsley <paul@pwsan.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-17drivers: hwspinlock: add frameworkOhad Ben-Cohen
Add a platform-independent hwspinlock framework. Hardware spinlock devices are needed, e.g., in order to access data that is shared between remote processors, that otherwise have no alternative mechanism to accomplish synchronization and mutual exclusion operations. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Hari Kanigeri <h-kanigeri2@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Paul Walmsley <paul@pwsan.com> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tony Lindgren <tony@atomide.com>