summaryrefslogtreecommitdiff
path: root/drivers/i2c/busses/i2c-mpc.c
AgeCommit message (Collapse)Author
2024-11-17i2c: Switch back to struct platform_driver::remove()Uwe Kleine-König
After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all platform drivers below drivers/i2c to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-09-10i2c: mpc: Use devm_clk_get_optional_enabled() to simplify codeZhang Zekun
devm_clk_get_optional() and clk_prepare_enable() can be replaced by the helper function devm_clk_get_optional_enabled(). Let's simplify the code by using devm_clk_get_optional_enabled() and avoid calling clk_disable_unprepare(). Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-07-11i2c: mpc: reword according to newest specificationWolfram Sang
Change the wording of this driver wrt. the newest I2C v7 and SMBus 3.2 specifications and replace "master/slave" with more appropriate terms. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-05-06i2c: mpc: Removal of of_node_put with __free for auto cleanupAbhinav Jain
Remove of_node_put from node_ctrl and node struct device_nodes. Move the declaration to initialization for ensuring scope sanity. Suggested-by: Julia Lawall <julia.lawall@inria.fr> Signed-off-by: Abhinav Jain <jain.abhinav177@gmail.com> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-03-04i2c: mpc: remove outdated macroWolfram Sang
DRV_NAME was useful back in the days. But here, being used once, it is only cruft. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-03-04i2c: mpc: use proper binding for transfer timeoutsWolfram Sang
"i2c-scl-clk-low-timeout-us" is wrongly used here because it describes maximum clock stretching not maximum transfer time. Additionally, it is deprecated because of issues. Move this driver to the correct binding. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2023-08-14I2C: Explicitly include correct DT includesRob Herring
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-07-06i2c: mpc: Drop unused variableGuenter Roeck
Fix the following build error. Error log: drivers/i2c/busses/i2c-mpc.c: In function 'mpc_i2c_setup_512x': drivers/i2c/busses/i2c-mpc.c:310:20: error: unused variable 'pval' Fixes: 9d178e00583e ("i2c: mpc: Use of_property_read_reg() to parse "reg"") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-06-14i2c: mpc: Use of_property_read_reg() to parse "reg"Rob Herring
Use the recently added of_property_read_reg() helper to get the untranslated "reg" address value. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-06-05i2c: Convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Alain Volmat <alain.volmat@foss.st.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Acked-by: Jochen Friedrich <jochen@scram.de> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Asmaa Mnebhi <asnaa@nvidia.com> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Chris Pringle <chris.pringle@phabrix.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Tali Perry <tali.perry@nuvoton.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-03-29i2c: mpc: Use i2c-scl-clk-low-timeout-us i2c propertyAndi Shyti
"fsl,timeout" is marked as deprecated and replaced by the "i2c-scl-clk-low-timeout-us" i2c property. Use this latter and, in case it is missing, for back compatibility, check whether we still have "fsl,timeout" defined. Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-03-29i2c: mpc: Use of_property_read_u32 instead of of_get_propertyAndi Shyti
"of_property_read_u32()" is preferred to "of_get_property()" for retrieving u32 from the device tree. Replace it. Suggested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-03-16i2c: Use of_property_read_bool() for boolean propertiesRob Herring
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. Convert reading boolean properties to to of_property_read_bool(). Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-22powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnodeAndy Shevchenko
Switch mpc5xxx_get_bus_frequency() to use fwnode in order to help cleaning up other parts of the kernel from OF specific code. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # for i2c-mpc Acked-by: Wolfram Sang <wsa@kernel.org> # for the I2C part Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for mscan/mpc5xxx_can Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220507100147.5802-2-andriy.shevchenko@linux.intel.com
2022-01-14Merge branch 'i2c/for-mergewindow' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "Mostly driver updates and refactorization. The removal of the XLR driver and the i801 refactoring stand out a little. In the core, we enabled async suspend/resume for I2C controllers and their clients. No issues were reported during the test phase in -next. We will see how this goes for mainline" * 'i2c/for-mergewindow' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (54 commits) i2c: sh_mobile: remove unneeded semicolon i2c: riic: Use platform_get_irq() to get the interrupt i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt i2c: bcm2835: Use platform_get_irq() to get the interrupt i2c: aspeed: Remove unused includes dt-bindings: i2c: aspeed: Drop stray '#interrupt-cells' i2c: sh_mobile: update to new DMAENGINE API when terminating i2c: rcar: update to new DMAENGINE API when terminating i2c: exynos5: Fix getting the optional clock i2c: designware-pci: Convert to use dev_err_probe() i2c: designware-pci: use __maybe_unused for PM functions i2c: designware-pci: Group MODULE_*() macros i2c: designware-pci: Add a note about struct dw_scl_sda_cfg usage i2c: designware-pci: Fix to change data types of hcnt and lcnt parameters i2c: designware: Do not complete i2c read without RX_FULL interrupt eeprom: at24: Add support for 24c1025 EEPROM dt-bindings: at24: add at24c1025 i2c: tegra: use i2c_timings for bus clock freq dt-bindings: at24: Rework special case compatible handling i2c: i801: Don't clear status flags twice in interrupt mode ...
2022-01-06i2c: mpc: Avoid out of bounds memory accessChris Packham
When performing an I2C transfer where the last message was a write KASAN would complain: BUG: KASAN: slab-out-of-bounds in mpc_i2c_do_action+0x154/0x630 Read of size 2 at addr c814e310 by task swapper/2/0 CPU: 2 PID: 0 Comm: swapper/2 Tainted: G B 5.16.0-rc8 #1 Call Trace: [e5ee9d50] [c08418e8] dump_stack_lvl+0x4c/0x6c (unreliable) [e5ee9d70] [c02f8a14] print_address_description.constprop.13+0x64/0x3b0 [e5ee9da0] [c02f9030] kasan_report+0x1f0/0x204 [e5ee9de0] [c0c76ee4] mpc_i2c_do_action+0x154/0x630 [e5ee9e30] [c0c782c4] mpc_i2c_isr+0x164/0x240 [e5ee9e60] [c00f3a04] __handle_irq_event_percpu+0xf4/0x3b0 [e5ee9ec0] [c00f3d40] handle_irq_event_percpu+0x80/0x110 [e5ee9f40] [c00f3e48] handle_irq_event+0x78/0xd0 [e5ee9f60] [c00fcfec] handle_fasteoi_irq+0x19c/0x370 [e5ee9fa0] [c00f1d84] generic_handle_irq+0x54/0x80 [e5ee9fc0] [c0006b54] __do_irq+0x64/0x200 [e5ee9ff0] [c0007958] __do_IRQ+0xe8/0x1c0 [c812dd50] [e3eaab20] 0xe3eaab20 [c812dd90] [c0007a4c] do_IRQ+0x1c/0x30 [c812dda0] [c0000c04] ExternalInput+0x144/0x160 --- interrupt: 500 at arch_cpu_idle+0x34/0x60 NIP: c000b684 LR: c000b684 CTR: c0019688 REGS: c812ddb0 TRAP: 0500 Tainted: G B (5.16.0-rc8) MSR: 00029002 <CE,EE,ME> CR: 22000488 XER: 20000000 GPR00: c10ef7fc c812de90 c80ff200 c2394718 00000001 00000001 c10e3f90 00000003 GPR08: 00000000 c0019688 c2394718 fc7d625b 22000484 00000000 21e17000 c208228c GPR16: e3e99284 00000000 ffffffff c2390000 c001bac0 c2082288 c812df60 c001ba60 GPR24: c23949c0 00000018 00080000 00000004 c80ff200 00000002 c2348ee4 c2394718 NIP [c000b684] arch_cpu_idle+0x34/0x60 LR [c000b684] arch_cpu_idle+0x34/0x60 --- interrupt: 500 [c812de90] [c10e3f90] rcu_eqs_enter.isra.60+0xc0/0x110 (unreliable) [c812deb0] [c10ef7fc] default_idle_call+0xbc/0x230 [c812dee0] [c00af0e8] do_idle+0x1c8/0x200 [c812df10] [c00af3c0] cpu_startup_entry+0x20/0x30 [c812df20] [c001e010] start_secondary+0x5d0/0xba0 [c812dff0] [c00028a0] __secondary_start+0x90/0xdc This happened because we would overrun the i2c->msgs array on the final interrupt for the I2C STOP. This didn't happen if the last message was a read because there is no interrupt in that case. Ensure that we only access the current message if we are not processing a I2C STOP condition. Fixes: 1538d82f4647 ("i2c: mpc: Interrupt driven transfer") Reported-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-12-10i2c: mpc: Use atomic read and fix break conditionChris Packham
Maxime points out that the polling code in mpc_i2c_isr should use the _atomic API because it is called in an irq context and that the behaviour of the MCF bit is that it is 1 when the byte transfer is complete. All of this means the original code was effectively a udelay(100). Fix this by using readb_poll_timeout_atomic() and removing the negation of the break condition. Fixes: 4a8ac5e45cda ("i2c: mpc: Poll for MCF") Reported-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Tested-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-11-29i2c: mpc: Correct I2C reset procedureJoakim Tjernlund
Current I2C reset procedure is broken in two ways: 1) It only generate 1 START instead of 9 STARTs and STOP. 2) It leaves the bus Busy so every I2C xfer after the first fixup calls the reset routine again, for every xfer there after. This fixes both errors. Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com> Acked-by: Scott Wood <oss@buserror.net> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-07-20i2c: mpc: Poll for MCFChris Packham
During some transfers the bus can still be busy when an interrupt is received. Commit 763778cd7926 ("i2c: mpc: Restore reread of I2C status register") attempted to address this by re-reading MPC_I2C_SR once but that just made it less likely to happen without actually preventing it. Instead of a single re-read, poll with a timeout so that the bus is given enough time to settle but a genuine stuck SCL is still noticed. Fixes: 1538d82f4647 ("i2c: mpc: Interrupt driven transfer") Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-07-04Merge branch 'i2c/for-mergewindow' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - core supports now bus regulators controlling power for SCL/SDA - quite some DT binding conversions to YAML - added a seperate DT binding for the optional SMBus Alert feature - documentation with examples how to deal with I2C sysfs files - some bigger rework for the i801 driver - and a few usual driver updates * 'i2c/for-mergewindow' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (42 commits) i2c: ali1535: mention that the device should not be disabled i2c: mpc: Restore reread of I2C status register i2c: core-smbus: Expose PEC calculate function for generic use Documentation: i2c: Add doc for I2C sysfs i2c: core: Disable client irq on reboot/shutdown dt-bindings: i2c: update bindings for MT8195 SoC i2c: imx: Fix some checkpatch warnings i2c: davinci: Simplify with dev_err_probe() i2c: cadence: Simplify with dev_err_probe() i2c: xiic: Simplify with dev_err_probe() i2c: cadence: Clear HOLD bit before xfer_size register rolls over dt-bindings: i2c: ce4100: Replace "ti,pcf8575" by "nxp,pcf8575" i2c: i801: Improve i801_setup_hstcfg i2c: i801: Use driver name constant instead of function dev_driver_string i2c: i801: Simplify initialization of i2c_board_info in i801_probe_optional_slaves i2c: i801: Improve status polling i2c: cht-wc: Replace of_node by NULL i2c: riic: Add RZ/G2L support dt-bindings: i2c: renesas,riic: Document RZ/G2L I2C controller dt-bindings: i2c: renesas,iic: Convert to json-schema ...
2021-07-02i2c: mpc: Restore reread of I2C status registerChris Packham
Prior to commit 1538d82f4647 ("i2c: mpc: Interrupt driven transfer") the old interrupt handler would reread MPC_I2C_SR after checking the CSR_MIF bit. When the driver was re-written this was removed as it seemed unnecessary. However as it turns out this is necessary for i2c devices which do clock stretching otherwise we end up thinking the bus is still busy when processing the interrupt. Fixes: 1538d82f4647 ("i2c: mpc: Interrupt driven transfer") Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-05-27i2c: mpc: implement erratum A-004447 workaroundChris Packham
The P2040/P2041 has an erratum where the normal i2c recovery mechanism does not work. Implement the alternative recovery mechanism documented in the P2040 Chip Errata Rev Q. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-04-15i2c: mpc: Drop duplicate message from devm_platform_ioremap_resource()Andy Shevchenko
devm_platform_ioremap_resource() prints a message in case of error. Drop custom one. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-04-15i2c: mpc: Use device_get_match_data() helperAndy Shevchenko
Use the device_get_match_data() helper instead of open coding. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-04-15i2c: mpc: Remove CONFIG_PM_SLEEP ifdefferyAndy Shevchenko
Use __maybe_unused for the suspend()/resume() hooks and get rid of the CONFIG_PM_SLEEP ifdeffery to improve the code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-04-15i2c: mpc: Use devm_clk_get_optional()Andy Shevchenko
The peripheral clock is optional and we may get an -EPROBE_DEFER error code which would not be propagated correctly, fix this by using devm_clk_get_optional(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-04-15i2c: mpc: Update license and copyrightChris Packham
Use SPDX-License-Identifier and add copyright for Allied Telesis because of the reasonably large rewrite in the preceding patch. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-04-15i2c: mpc: Interrupt driven transferChris Packham
The fsl-i2c controller will generate an interrupt after every byte transferred. Make use of this interrupt to drive a state machine which allows the next part of a transfer to happen as soon as the interrupt is received. This is particularly helpful with SMBUS devices like the LM81 which will timeout if we take too long between bytes in a transfer. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-04-13i2c: mpc: Remove redundant NULL checkChris Packham
In mpc_i2c_get_fdr_8xxx div is assigned as we iterate through the mpc_i2c_dividers_8xxx array. By the time we exit the loop div will either have the value that matches the requested speed or be pointing at the last entry in mpc_i2c_dividers_8xxx. Checking for div being NULL after the loop is redundant so remove the check. Reported-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-04-13i2c: mpc: drop release for resource allocated with devm_*Wei Yongjun
It's not necessary to release resource which allocated with devm_* and those release may leads to a double free. And also remove useless irq_dispose_mapping() call since mapping not created. Fixes: 09aab7add7bf ("i2c: mpc: use device managed APIs") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-04-10i2c: mpc: use device managed APIsChris Packham
Use device managed functions an clean up error handling. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-04-10i2c: mpc: make interrupt mandatory and remove polling codeChris Packham
All the in-tree dts files that use one of the compatible strings from i2c-mpc.c provide an interrupt property. By making this mandatory we can simplify the code. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-04-10i2c: mpc: Make use of i2c_recover_bus()Chris Packham
Move the existing calls of mpc_i2c_fixup() to a recovery function registered via bus_recovery_info. This makes it more obvious that recovery is supported and allows for a future where recovery is triggered by the i2c core. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2018-01-15i2c: mpc: always determine I2C clock prescaler at runtimeArseny Solokha
Remove the facility for setting the prescaler value at compile time entirely. It was only used for two SoCs, duplicating the actual value for one of them and setting sometimes bogus value for another. Make all MPC8xxx SoCs obtain their actual I2C clock prescaler from a single place in the code. Changes from v2: - left Device Tree compatibles in place Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-15i2c: mpc: fix PORDEVSR2 mask for MPC8533/44Arseny Solokha
According to the reference manuals for the corresponding SoCs, SEC frequency ratio configuration is indicated by bit 26 of the POR Device Status Register 2. Consequently, SEC_CFG bit should be tested by mask 0x20, not 0x80. Testing the wrong bit leads to selection of wrong I2C clock prescaler on those SoCs. Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-15i2c: mpc: unify obtaining the MPC8533/44 I2C clock prescaler w/ MPC8xxxArseny Solokha
Commit 8ce795cb0c6b ("i2c: mpc: assign the correct prescaler from SVR") introduced the common helper function for obtaining the actual clock prescaler value for MPC85xx. However, getting the prescaler for MPC8544 which depends on the SEC frequency ratio on this platform, has been always performed separately based on the corresponding Device Tree configuration. Move special handling of MPC8544 into that common helper. Make it dependent on the SoC version and not on Device Tree compatible node, as is the case with all other SoCs. Handle MPC8533 the same way which is similar to MPC8544 in this regard, according to AN2919 "Determining the I2C Frequency Divider Ratio for SCL". Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-01-15i2c: mpc: get MPC8xxx I2C clock prescaler before using it in calculationsArseny Solokha
Obtaining the actual I2C clock prescaler value in mpc_i2c_setup_8xxx() only happens when the clock parameter is set to something other than MPC_I2C_CLOCK_LEGACY. When the clock parameter is exactly MPC_I2C_CLOCK_LEGACY, the prescaler parameter is used in arithmetic division as provided by the caller, resulting in a division by zero for the majority of processors supported by the module. Avoid division by zero by obtaining the actual I2C clock prescaler in mpc_i2c_setup_8xxx() unconditionally regardless of the passed clock value. Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-11-01i2c: mpc: remove useless variable initializationWolfram Sang
cppcheck rightfully says: drivers/i2c/busses/i2c-mpc.c:329: style: Variable 'node' is reassigned a value before the old one has been used. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-10-27i2c: mpc: use of_property_read_boolJulia Lawall
Use of_property_read_bool to check for the existence of a property. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-02sched/headers: Prepare to move signal wakeup & sigpending methods from ↵Ingo Molnar
<linux/sched.h> into <linux/sched/signal.h> Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-22i2c: don't print error when adding adapter failsWolfram Sang
The core will do this for us now. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Peter Korsgaard <peter@korsgaard.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Ray Jui <ray.jui@broadcom.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-03-27i2c: mpc: Fix ISR return valueAmit Tomar
ISR should not return IRQ_HANDLED for not handling anything. This patch fixes the return value of ISR for the same case. Signed-off-by: Amit Singh Tomar <amit.tomar@freescale.com> Acked-by: Danielle Costantino <danielle.costantino@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-03-15i2c: mpc: assign the correct prescaler from SVRValentin Longchamp
For the 85xx platforms, the source clock for the i2c-mpc can change from one SoC to another. This is documented in the AN2919 "Determining the I2C Frequency Divider Ratio for SCL" by Freescale. Not taking this into account can lead to the output SCL frequency to by off by an offset. It was observed on the P2041 from the QorIQ family. This patch fixes this problem by setting the prescaler value to the appropriate value when required. The SoCs that required a different prescaler than 1 are identified by reading out the SVR as discussed in http://thread.gmane.org/gmane.linux.drivers.devicetree/94247/focus=20556 Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-11-12i2c: mpc: report correct I2C error return codesDanielle Costantino
This patch enforces correct I2C error returned codes from Freescale's MPC i2c bus driver, allowing for proper user-space/kernel error handling. Signed-off-by: Danielle Costantino <danielle.costantino@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20i2c: busses: drop owner assignment from platform_driversWolfram Sang
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-08-08i2c: mpc: delete unneeded test before of_node_putJulia Lawall
Of_node_put supports NULL as its argument, so the initial test is not necessary. Suggested by Uwe Kleine-König. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e; @@ -if (e) of_node_put(e); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-03i2c: mpc: insert DR read in i2c_fixup()Valentin Longchamp
The mpc_i2c_fixup function is called when the bus is not released by a slave. The function generates 9 pulses that should lead the slave to release the bus. The sequence that generates the pulses disables/enables the I2C module that controls the blocked bus. We have found out on the P2041 SoC that this could cause the CPU to hang (for a short delay). To avoid this, this patch introduces a read to the I2CDR register between the re-enablement of the I2C module in master mode and its returning to the slave mode instead of the delay (the final delay, between the pulses is kept), as proposed in procedure from the P2041 reference manual (16.6.2.3), and the other manuals from the mpc83xx and mpc85xx families. Signed-off-by: Rainer Boschung <rainer.boschung@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-01-24i2c: delete non-required instances of include <linux/init.h>Paul Gortmaker
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-10-09drivers: clean-up prom.h implicit includesRob Herring
Powerpc is a mess of implicit includes by prom.h. Add the necessary explicit includes to drivers in preparation of prom.h cleanup. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@linaro.org>
generated by cgit (git 2.34.1) at 2025-03-29 11:11:50 +0000