summaryrefslogtreecommitdiff
path: root/drivers/i2c
AgeCommit message (Collapse)Author
2022-08-03Merge tag 'i2c-for-5.20-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - new drivers: Microchip CoreI2C, Renesas RZV2M - quite some DT schema conversions and extensions - and a bunch of driver updates and improvements * tag 'i2c-for-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (37 commits) i2c: extend documentation about retvals of master_xfer functions i2c: mux-gpmux: Add of_node_put() when breaking out of loop dt-bindings: i2c: i2c-rk3x: Document Rockchip RV1126 i2c: qcom-geni: Use the correct return value i2c: cadence: Support PEC for SMBus block read i2c: qcom-geni: Propagate GENI_ABORT_DONE to geni_i2c_abort_xfer() i2c: brcmstb: Use dev_name() for adapter name i2c: Add Renesas RZ/V2M controller dt-bindings: i2c: Document RZ/V2M I2C controller i2c: mlxcpld: Add callback to notify probing completion i2c: scmi: Replace open coded device_get_match_data() i2c: stm32: add support for the STM32MP13 soc dt-bindings: i2c: st,stm32-i2c: add entry for stm32mp13 dt-bindings: i2c: i2c-rk3x: add rk3588 compatible i2c: add support for microchip fpga i2c controllers i2c: i801: Add support for Intel Meteor Lake-P dt-bindings: i2c: nomadik: Add power domain to binding dt-bindings: i2c: nomadik: Drop unused voltage supply from example i2c: Fix a potential use after free i2c: hisi: use HZ_PER_KHZ macro in units.h ...
2022-08-02Merge tag 'arm-drivers-6.0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC drivers from Arnd Bergmann: "The SoC driver updates contain changes to improve support for additional SoC variants, as well as cleanups an minor bugfixes in a number of existing drivers. Notable updates this time include: - Support for Qualcomm MSM8909 (Snapdragon 210) in various drivers - Updates for interconnect drivers on Qualcomm Snapdragon - A new driver support for NMI interrupts on Fujitsu A64fx - A rework of Broadcom BCMBCA Kconfig dependencies - Improved support for BCM2711 (Raspberry Pi 4) power management to allow the use of the V3D GPU - Cleanups to the NXP guts driver - Arm SCMI firmware driver updates to add tracing support, and use the firmware interfaces for system power control and for power capping" * tag 'arm-drivers-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (125 commits) soc: a64fx-diag: disable modular build dt-bindings: soc: qcom: qcom,smd-rpm: add power-controller dt-bindings: soc: qcom: aoss: document qcom,sm8450-aoss-qmp dt-bindings: soc: qcom,rpmh-rsc: simplify qcom,tcs-config ARM: mach-qcom: Add support for MSM8909 dt-bindings: arm: cpus: Document "qcom,msm8909-smp" enable-method soc: qcom: spm: Add CPU data for MSM8909 dt-bindings: soc: qcom: spm: Add MSM8909 CPU compatible soc: qcom: rpmpd: Add compatible for MSM8909 dt-bindings: power: qcom-rpmpd: Add MSM8909 power domains soc: qcom: smd-rpm: Add compatible for MSM8909 dt-bindings: soc: qcom: smd-rpm: Add MSM8909 soc: qcom: icc-bwmon: Remove unnecessary print function dev_err() soc: fujitsu: Add A64FX diagnostic interrupt driver soc: qcom: socinfo: Fix the id of SA8540P SoC soc: qcom: Make QCOM_RPMPD depend on PM tty: serial: bcm63xx: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA spi: bcm63xx-hsspi: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA clk: bcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA hwrng: bcm2835: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA ...
2022-07-26i2c: mux-gpmux: Add of_node_put() when breaking out of loopLiang He
In i2c_mux_probe(), we should call of_node_put() when breaking out of for_each_child_of_node() which will automatically increase and decrease the refcount. Fixes: ac8498f0ce53 ("i2c: i2c-mux-gpmux: new driver") Signed-off-by: Liang He <windhl@126.com> Acked-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-07-24i2c: qcom-geni: Use the correct return valueBjorn Andersson
The introduction of GPI support moved things around and instead of returning the result from geni_i2c_xfer() the number of messages in the request was returned, ignoring the actual result. Fix this. Fixes: d8703554f4de ("i2c: qcom-geni: Add support for GPI DMA") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-07-24i2c: cadence: Support PEC for SMBus block readLars-Peter Clausen
SMBus packet error checking (PEC) is implemented by appending one additional byte of checksum data at the end of the message. This provides additional protection and allows to detect data corruption on the I2C bus. SMBus block reads support variable length reads. The first byte in the read message is the number of available data bytes. The combination of PEC and block read is currently not supported by the Cadence I2C driver. * When PEC is enabled the maximum transfer length for block reads increases from 33 to 34 bytes. * The I2C core smbus emulation layer relies on the driver updating the `i2c_msg` `len` field with the number of received bytes. The updated length is used when checking the PEC. Add support to the Cadence I2C driver for handling SMBus block reads with PEC. To determine the maximum transfer length uses the initial `len` value of the `i2c_msg`. When PEC is enabled this will be 2, when it is disabled it will be 1. Once a read transfer is done also increment the `len` field by the amount of received data bytes. This change has been tested with a UCM90320 PMBus power monitor, which requires block reads to access certain data fields, but also has PEC enabled by default. Fixes: df8eb5691c48 ("i2c: Add driver for Cadence I2C controller") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: Shubhrajyoti Datta <Shubhrajyoti.datta@amd.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-07-24i2c: qcom-geni: Propagate GENI_ABORT_DONE to geni_i2c_abort_xfer()Bjorn Andersson
Waiting for M_CMD_ABORT_EN in geni_i2c_abort_xfer() races with the interrupt handler which will read and clear the abort bit, the result is that every abort attempt takes 1 second and is followed by a message about the abort having times out. Introduce a new state variable to carry the abort_done state from the interrupt handler back to geni_i2c_abort_xfer(). Also, turn NACK and TIMEOUT errors into debug messages Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> [wsa: squashed two patches into one] Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-07-22i2c: brcmstb: Use dev_name() for adapter nameFlorian Fainelli
This make it easier to disambiguate the different i2c controllers present in a system, and then correlating with /proc/interrupts allows to know which instance is interrupt driven and which one is not. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-07-22i2c: Add Renesas RZ/V2M controllerPhil Edworthy
Yet another i2c controller from Renesas that is found on the RZ/V2M (r9a09g011) SoC. It can support only 100kHz and 400KHz operation. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> [wsa: removed superfluous class type and renamed a function] Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-07-16i2c: mlxcpld: Add callback to notify probing completionVadim Pasternak
Add notification to inform caller that driver probing has been completed. It allows to user, invoked platform device registration for "i2c-mlxcpld" driver, to be notified that bus adapter is available, and thus some devices could be connected to this bus. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-07-16i2c: cadence: Change large transfer count reset logic to be unconditionalRobert Hancock
Problems were observed on the Xilinx ZynqMP platform with large I2C reads. When a read of 277 bytes was performed, the controller NAKed the transfer after only 252 bytes were transferred and returned an ENXIO error on the transfer. There is some code in cdns_i2c_master_isr to handle this case by resetting the transfer count in the controller before it reaches 0, to allow larger transfers to work, but it was conditional on the CDNS_I2C_BROKEN_HOLD_BIT quirk being set on the controller, and ZynqMP uses the r1p14 version of the core where this quirk is not being set. The requirement to do this to support larger reads seems like an inherently required workaround due to the core only having an 8-bit transfer size register, so it does not appear that this should be conditional on the broken HOLD bit quirk which is used elsewhere in the driver. Remove the dependency on the CDNS_I2C_BROKEN_HOLD_BIT for this transfer size reset logic to fix this problem. Fixes: 63cab195bf49 ("i2c: removed work arounds in i2c driver for Zynq Ultrascale+ MPSoC") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Shubhrajyoti Datta <Shubhrajyoti.datta@amd.com> Acked-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-07-16i2c: scmi: Replace open coded device_get_match_data()Andy Shevchenko
Replace open coded device_get_match_data() in acpi_smbus_cmi_add(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-07-16i2c: stm32: add support for the STM32MP13 socAlain Volmat
Add a new compatible for the stm32mp13. Fast Mode Plus control register address differ from the one for STM32MP15. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-07-16i2c: imx: fix typo in commentFlavio Suligoi
to provid --> to provide Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-07-16i2c: mlxcpld: Fix register setting for 400KHz frequencyVadim Pasternak
Fix setting of 'Half Cycle' register for 400KHz frequency. Fixes: fa1049135c15 ("i2c: mlxcpld: Modify register setting for 400KHz frequency") Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-07-12Merge tag 'arm-soc/for-5.20/drivers' of https://github.com/Broadcom/stblinux ↵Arnd Bergmann
into arm/drivers This pull request contains Broadcom SoC drivers updatse for 5.20, please pull the following: - Julia fixes a typo in the Broadcom STB legacy power management code - Liang fixes a device_node reference count leak in the Broadcom STB BIU driver code error path(s) - Nicolas and Stefan provide updates to the BCM2835 power management driver allowing its use on BCM2711 (Raspberry Pi 4) and to enable the use of the V3D GPU driver on such platforms. This is a merge of an immutable branch from Lee Jones' MFD tree - William removes the use of CONFIG_ARCH_BCM_63XX which is removed and replaces the dependencies with CONFIG_ARCH_BCMBCA which is how all of the DSL/PON SoCs from Broadcom are now supported in the upstream kernel. * tag 'arm-soc/for-5.20/drivers' of https://github.com/Broadcom/stblinux: tty: serial: bcm63xx: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA spi: bcm63xx-hsspi: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA clk: bcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA hwrng: bcm2835: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA phy: brcm-sata: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA i2c: brcmstb: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA ata: ahci_brcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA soc: bcm: bcm2835-power: Bypass power_on/off() calls soc: bcm: bcm2835-power: Add support for BCM2711's RPiVid ASB soc: bcm: bcm2835-power: Resolve ASB register macros soc: bcm: bcm2835-power: Refactor ASB control mfd: bcm2835-pm: Add support for BCM2711 mfd: bcm2835-pm: Use 'reg-names' to get resources soc: bcm: brcmstb: biuctrl: Add missing of_node_put() soc: bcm: brcmstb: pm: pm-arm: fix typo in comment Link: https://lore.kernel.org/r/20220711164451.3542127-6-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-08i2c: brcmstb: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCAWilliam Zhang
Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make I2C_BRCMSTB depending on ARCH_BCMBCA. Signed-off-by: William Zhang <william.zhang@broadcom.com> Acked-by: Wolfram Sang <wsa@kernel.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2022-07-07i2c: cadence: Unregister the clk notifier in error pathSatish Nagireddy
This patch ensures that the clock notifier is unregistered when driver probe is returning error. Fixes: df8eb5691c48 ("i2c: Add driver for Cadence I2C controller") Signed-off-by: Satish Nagireddy <satish.nagireddy@getcruise.com> Tested-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-07-07i2c: add support for microchip fpga i2c controllersConor Dooley
Add Microchip CoreI2C i2c controller support. This driver supports the "hard" i2c controller on the Microchip PolarFire SoC & the basic feature set for "soft" i2c controller implemtations in the FPGA fabric. Co-developed-by: Daire McNamara <daire.mcnamara@microchip.com> Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-07-06i2c: i801: Add support for Intel Meteor Lake-PJarkko Nikula
Add SMBus PCI ID on Intel Meteor Lake-P. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-29i2c: piix4: Fix a memory leak in the EFCH MMIO supportJean Delvare
The recently added support for EFCH MMIO regions introduced a memory leak in that code path. The leak is caused by the fact that release_resource() merely removes the resource from the tree but does not free its memory. We need to call release_mem_region() instead, which does free the memory. As a nice side effect, this brings back some symmetry between the legacy and MMIO paths. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reported-by: Yi Zhang <yi.zhang@redhat.com> Tested-by: Yi Zhang <yi.zhang@redhat.com> Reviewed-by: Terry Bowman <terry.bowman@amd.com> Tested-by: Terry Bowman <Terry.Bowman@amd.com> Fixes: 7c148722d074 ("i2c: piix4: Add EFCH MMIO support to region request and release") Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-16i2c: Fix a potential use after freeXu Wang
Free the adap structure only after we are done using it. This patch just moves the put_device() down a bit to avoid the use after free. Fixes: 611e12ea0f12 ("i2c: core: manage i2c bus device refcount in i2c_[get|put]_adapter") Signed-off-by: Xu Wang <vulab@iscas.ac.cn> [wsa: added comment to the code, added Fixes tag] Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-15i2c: hisi: use HZ_PER_KHZ macro in units.hYicong Yang
HZ macros has been centralized in units.h since [1]. Use it to avoid duplicated definition. [1] commit e2c77032fcbe ("units: add the HZ macros") Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-15i2c: qcom-cci: add msm8974 compatibleMatti Lehtimäki
MSM8974 CCI is the same as MSM8916 except it has two masters. Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com> Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-14i2c: mediatek: Fix an error handling path in mtk_i2c_probe()Christophe JAILLET
The clsk are prepared, enabled, then disabled. So if an error occurs after the disable step, they are still prepared. Add an error handling path to unprepare the clks in such a case, as already done in the .remove function. Fixes: 8b4fc246c3ff ("i2c: mediatek: Optimize master_xfer() and avoid circular locking") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Qii Wang <qii.wang@mediatek.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-14i2c: mv64xxx: Add atomic_xfer method to driverChris Morgan
Add an atomic_xfer method to the driver so that it behaves correctly when controlling a PMIC that is responsible for device shutdown. The atomic_xfer method added is similar to the one from the i2c-rk3x driver. When running an atomic_xfer a bool flag in the driver data is set, the interrupt is not unmasked on transfer start, and the IRQ handler is manually invoked while waiting for pending transfers to complete. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-14i2c: mv64xxx: Remove shutdown method from driverChris Morgan
When I attempt to shut down (or reboot) my R8 based NTC CHIP with this i2c driver I get the following error: "i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0". Reboots are successful but shutdowns freeze. If I comment out the shutdown routine the device both reboots and shuts down successfully without receiving this error (however it does receive a warning of missing atomic_xfer). It appears that very few i2c drivers have a shutdown method, I assume because these devices are often used to communicate with PMICs (such as in my case with the R8 based NTC CHIP). I'm proposing we simply remove this method so long as it doesn't cause trouble for others downstream. I'll work on an atomic_xfer method and submit that in a different patch. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-14i2c: xiic: Fix the type check for xiic_wakeupShubhrajyoti Datta
Fix the coverity warning mixed_enum_type: enumerated type mixed with another type We are passing an enum in the xiic_wakeup lets change the function parameters to reflect that. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Acked-by: Michal Simek <michal.simek@amd.com> [wsa: fixed $subject with proper prefix] Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-13i2c: designware: Use standard optional ref clock implementationSerge Semin
Even though the DW I2C controller reference clock source is requested by the method devm_clk_get() with non-optional clock requirement the way the clock handler is used afterwards has a pure optional clock semantic (though in some circumstances we can get a warning about the clock missing printed in the system console). There is no point in reimplementing that functionality seeing the kernel clock framework already supports the optional interface from scratch. Thus let's convert the platform driver to using it. Note by providing this commit we get to fix two problems. The first one was introduced in commit c62ebb3d5f0d ("i2c: designware: Add support for an interface clock"). It causes not having the interface clock (pclk) enabled/disabled in case if the reference clock isn't provided. The second problem was first introduced in commit b33af11de236 ("i2c: designware: Do not require clock when SSCN and FFCN are provided"). Since that modification the deferred probe procedure has been unsupported in case if the interface clock isn't ready. Fixes: c62ebb3d5f0d ("i2c: designware: Add support for an interface clock") Fixes: b33af11de236 ("i2c: designware: Do not require clock when SSCN and FFCN are provided") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-08i2c: dummy: Drop no-op remove functionUwe Kleine-König
A remove callback that just returns 0 is equivalent to no callback at all as can be seen in i2c_device_remove(). So simplify accordingly. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-08i2c: mxs: Silence a clang warningFabio Estevam
Change the of_device_get_match_data() cast to (uintptr_t) to silence the following clang warning: drivers/i2c/busses/i2c-mxs.c:802:18: warning: cast to smaller integer type 'enum mxs_i2c_devtype' from 'const void *' [-Wvoid-pointer-to-enum-cast] Reported-by: kernel test robot <lkp@intel.com> Fixes: c32abd8b5691 ("i2c: mxs: Remove unneeded platform_device_id") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-08i2c: npcm7xx: Add check for platform_driver_registerJiasheng Jiang
As platform_driver_register() could fail, it should be better to deal with the return value in order to maintain the code consisitency. Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Acked-by: Tali Perry <tali.perry1@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-08i2c: qcom-cci: simplify access to bus data structureVladimir Zapolskiy
Trivial non-functional change, which adds an alias to an extensively used data location. Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-08i2c: npcm: Capitalize the one-line commentTyrone Ting
Make the one-line comments capital in the driver to get the comment style consistent. Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver") Signed-off-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-08i2c: npcm: Support NPCM845Tyrone Ting
Add NPCM8XX I2C support. The NPCM8XX uses a similar i2c module as NPCM7XX. The internal HW FIFO is larger in NPCM8XX. Signed-off-by: Tyrone Ting <kfting@nuvoton.com> Acked-by: Tomer Maimon <tmaimon77@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-08i2c: npcm: Correct slave role behaviorTali Perry
Correct the slave transaction logic to be compatible with the generic slave backend driver. Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver") Signed-off-by: Tali Perry <tali.perry1@gmail.com> Signed-off-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-08i2c: npcm: Remove own slave addresses 2:10Tali Perry
NPCM can support up to 10 own slave addresses. In practice, only one address is actually being used. In order to access addresses 2 and above, need to switch register banks. The switch needs spinlock. To avoid using spinlock for this useless feature removed support of SA >= 2. Also fix returned slave event enum. Remove some comment since the bank selection is not required. The bank selection is not required since the supported slave addresses are reduced. Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver") Signed-off-by: Tali Perry <tali.perry1@gmail.com> Signed-off-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-02i2c: ismt: prevent memory corruption in ismt_access()Dan Carpenter
The "data->block[0]" variable comes from the user and is a number between 0-255. It needs to be capped to prevent writing beyond the end of dma_buffer[]. Fixes: 5e9a97b1f449 ("i2c: ismt: Adding support for I2C_SMBUS_BLOCK_PROC_CALL") Reported-and-tested-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-05-31Merge tag 'i2c-for-5.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "Only driver updates for 5.19. Bigger changes are for Meson, NPCM, and R-Car, but there are also changes all over the place" * tag 'i2c-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (34 commits) i2c: meson: fix typo in comment i2c: rcar: use flags instead of atomic_xfer i2c: rcar: REP_AFTER_RD is not a persistent flag i2c: rcar: use BIT macro consistently i2c: qcom-geni: remove unnecessary conditions i2c: mt7621: Use devm_platform_get_and_ioremap_resource() i2c: rcar: refactor handling of first message i2c: rcar: avoid race condition with SMIs i2c: xiic: Correct the datatype for rx_watermark i2c: rcar: fix PM ref counts in probe error paths i2c: npcm: Handle spurious interrupts i2c: npcm: Correct register access width i2c: npcm: Add tx complete counter i2c: npcm: Fix timeout calculation i2c: npcm: Remove unused variable clk_regmap i2c: npcm: Change the way of getting GCR regmap i2c: xiic: Fix Tx Interrupt path for grouped messages i2c: xiic: Fix coding style issues i2c: xiic: return value of xiic_reinit i2c: cadence: Increase timeout per message if necessary ...
2022-05-21drivers: i2c: thunderx: Allow driver to work with ACPI defined TWSI controllersPiyush Malgujar
Due to i2c->adap.dev.fwnode not being set, ACPI_COMPANION() wasn't properly found for TWSI controllers. Signed-off-by: Szymon Balcerak <sbalcerak@marvell.com> Signed-off-by: Piyush Malgujar <pmalgujar@marvell.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-21i2c: meson: fix typo in commentJulia Lawall
Spelling mistake (triple letters) in comment. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-21i2c: rcar: use flags instead of atomic_xferKuninori Morimoto
i2c-rcar already has priv->flags. This patch adds a new persistent flag ID_P_NOT_ATOMIC and uses it to save the extra variable. The negation of the logic was done to make the code more readable. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> [wsa: negated the logic, rebased, updated the commit message] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-21i2c: rcar: REP_AFTER_RD is not a persistent flagWolfram Sang
Previous refactoring makes it easy now to convert the above flag to a non-persistent one. This is more appropriate and easier to maintain. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-21i2c: rcar: use BIT macro consistentlyWolfram Sang
Easier to read and ensures proper types. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-21i2c: ismt: Provide a DMA buffer for Interrupt Cause LoggingMika Westerberg
Before sending a MSI the hardware writes information pertinent to the interrupt cause to a memory location pointed by SMTICL register. This memory holds three double words where the least significant bit tells whether the interrupt cause of master/target/error is valid. The driver does not use this but we need to set it up because otherwise it will perform DMA write to the default address (0) and this will cause an IOMMU fault such as below: DMAR: DRHD: handling fault status reg 2 DMAR: [DMA Write] Request device [00:12.0] PASID ffffffff fault addr 0 [fault reason 05] PTE Write access is not set To prevent this from happening, provide a proper DMA buffer for this that then gets mapped by the IOMMU accordingly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: From: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-21i2c: qcom-geni: remove unnecessary conditionsDan Carpenter
We know that "ret" is a negative error code at this point so there is no need to check. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-21i2c: mt7621: Use devm_platform_get_and_ioremap_resource()Yang Yingliang
Use devm_platform_get_and_ioremap_resource() to simplify code. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-21i2c: mt7621: fix missing clk_disable_unprepare() on error in mtk_i2c_probe()Yang Yingliang
Fix the missing clk_disable_unprepare() before return from mtk_i2c_probe() in the error handling case. Fixes: d04913ec5f89 ("i2c: mt7621: Add MediaTek MT7621/7628/7688 I2C driver") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-21i2c: rcar: refactor handling of first messageWolfram Sang
After moving ICMSR handling to interrupt handlers previously to fix a race condition, we can now also move ICMSR handling for the first message out of the function to prepare a message. By introducing a seperate function to initialize the first message, we can not only remove some code duplication but the remaining code is also easier to follow. The function to prepare a message is much simpler without ICMSR handling. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-21i2c: rcar: avoid race condition with SMIsWolfram Sang
A customer experienced a race condition with 'repeated starts' when a System Management Interrupt took over for 30us and more. The problem was that during the SMI a new MAT interrupt came in because we set up the 'repeated start' condition. But the old one was not acknowledged yet. So, when it was acknowledged after the SMI, the new MAT interrupt was lost, confusing the state machine of the driver. The fix consists of two parts. First, we do not clear the status register for 'repeated starts' when preparing the next message anymore. The interrupt handlers for sending and receiving data is now solely responsible for that and it makes the code easier to follow, in fact. Secondly, clearing the status register is now split up to handle MAT interrupts independently. This avoids the race condition because the old MAT interrupt will be now cleared before we initiate the "repeated start" condition. Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-05-21i2c: xiic: Correct the datatype for rx_watermarkShubhrajyoti Datta
The message length data type should be u16 as per the i2c_msg structure. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Acked-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
generated by cgit (git 2.34.1) at 2025-04-17 22:43:17 +0000