summaryrefslogtreecommitdiff
path: root/drivers/i2c
AgeCommit message (Collapse)Author
2018-04-27i2c: sprd: Fix the i2c count issueBaolin Wang
We found the I2C controller count register is unreliable sometimes, that will cause I2C to lose data. Thus we can read the data count from 'i2c_dev->count' instead of the I2C controller count register. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-04-27i2c: sprd: Prevent i2c accesses after suspend is calledBaolin Wang
Add one flag to indicate if the i2c controller has been in suspend state, which can prevent i2c accesses after i2c controller is suspended following system suspend. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-04-27i2c: dev: prevent ZERO_SIZE_PTR deref in i2cdev_ioctl_rdwr()Alexander Popov
i2cdev_ioctl_rdwr() allocates i2c_msg.buf using memdup_user(), which returns ZERO_SIZE_PTR if i2c_msg.len is zero. Currently i2cdev_ioctl_rdwr() always dereferences the buf pointer in case of I2C_M_RD | I2C_M_RECV_LEN transfer. That causes a kernel oops in case of zero len. Let's check the len against zero before dereferencing buf pointer. This issue was triggered by syzkaller. Signed-off-by: Alexander Popov <alex.popov@linux.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [wsa: use '< 1' instead of '!' for easier readability] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-04-18i2c: Remove depends on HAS_DMA in case of platform dependencyGeert Uytterhoeven
Remove dependencies on HAS_DMA where a Kconfig symbol depends on another symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST". In most cases this other symbol is an architecture or platform specific symbol, or PCI. Generic symbols and drivers without platform dependencies keep their dependencies on HAS_DMA, to prevent compiling subsystems or drivers that cannot work anyway. This simplifies the dependencies, and allows to improve compile-testing. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Mark Brown <broonie@kernel.org> Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-04-11i2c: add param sanity check to i2c_transfer()Ard Biesheuvel
The API docs describe i2c_transfer() as taking a pointer to an array of i2c_msg containing at least 1 entry, but leaves it to the individual drivers to sanity check the msgs and num parameters. Let's do this in core code instead. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> [wsa: changed '<= 0' to '< 1'] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-04-11i2c: i801: Restore configuration at shutdownJean Delvare
On some systems, the BIOS expects certain SMBus register values to match the hardware defaults. Restore these configuration registers at shutdown time to avoid confusing the BIOS. This avoids hard-locking such systems upon reboot. Signed-off-by: Jean Delvare <jdelvare@suse.de> Tested-by: Jason Andryuk <jandryuk@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@vger.kernel.org
2018-04-11i2c: i801: Save register SMBSLVCMD value only onceJean Delvare
Saving the original value of register SMBSLVCMD in i801_enable_host_notify() doesn't work, because this function is called not only at probe time but also at resume time. Do it in i801_probe() instead, so that the saved value is not overwritten at resume time. Signed-off-by: Jean Delvare <jdelvare@suse.de> Fixes: 22e94bd6779e ("i2c: i801: store and restore the SLVCMD register at load and unload") Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Jason Andryuk <jandryuk@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@vger.kernel.org # v4.10+
2018-04-07Merge branch 'i2c/for-4.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: -I2C core now reports proper OF style module alias. I'd like to repeat the note from the commit msg here (Thanks, Javier!): NOTE: This patch may break out-of-tree drivers that were relying on this behavior, and only had an I2C device ID table even when the device was registered via OF. There are no remaining drivers in mainline that do this, but out-of-tree drivers have to be fixed and define a proper OF device ID table to have module auto-loading working. - new driver for the SynQuacer I2C controller - major refactoring of the QUP driver - the piix4 driver now uses request_muxed_region which should fix a long standing resource conflict with the sp5100_tco watchdog - a bunch of small core & driver improvements * 'i2c/for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (53 commits) i2c: add support for Socionext SynQuacer I2C controller dt-bindings: i2c: add binding for Socionext SynQuacer I2C i2c: Update i2c_trace_msg static key to modern api i2c: fix parameter of trace_i2c_result i2c: imx: avoid taking clk_prepare mutex in PM callbacks i2c: imx: use clk notifier for rate changes i2c: make i2c_check_addr_validity() static i2c: rcar: fix mask value of prohibited bit dt-bindings: i2c: document R8A77965 bindings i2c: pca-platform: drop gpio from platform data i2c: pca-platform: use device_property_read_u32 i2c: pca-platform: unconditionally use devm_gpiod_get_optional sh: sh7785lcr: add GPIO lookup table for i2c controller reset i2c: qup: reorganization of driver code to remove polling for qup v2 i2c: qup: reorganization of driver code to remove polling for qup v1 i2c: qup: send NACK for last read sub transfers i2c: qup: fix buffer overflow for multiple msg of maximum xfer len i2c: qup: change completion timeout according to transfer length i2c: qup: use the complete transfer length to choose DMA mode i2c: qup: proper error handling for i2c error in BAM mode ...
2018-04-04i2c: add support for Socionext SynQuacer I2C controllerArd Biesheuvel
This is a cleaned up version of the I2C controller driver for the Fujitsu F_I2C IP, which was never supported upstream, and has now been incorporated into the Socionext SynQuacer SoC. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> [wsa: updated MAINTAINERS entry and removed two empty lines] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-04-03i2c: Update i2c_trace_msg static key to modern apiDavidlohr Bueso
No changes in refcount semantics -- key init is false; replace static_key_slow_inc|dec with static_branch_inc|dec static_key_false with static_branch_unlikely Added a '_key' suffix to i2c_trace_msg, for better self documentation. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-04-03i2c: fix parameter of trace_i2c_resultAhbong Chang
According to the event i2c_result defined in include/trace/events/i2c.h, the second parameter should be the number of messages instead of the ended loop index. The value of ended loop index is the same as ret. Signed-off-by: Ahbong Chang <cwahbong@google.com> Reviewed-by: Todd Poynor <toddpoynor@google.com> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-04-03i2c: imx: avoid taking clk_prepare mutex in PM callbacksLucas Stach
This is unsafe, as the runtime PM callbacks are called from the PM workqueue, so this may deadlock when handling an i2c attached clock, which may already hold the clk_prepare mutex from another context. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-04-03i2c: imx: use clk notifier for rate changesLucas Stach
Instead of repeatedly calling clk_get_rate for each transfer, register a clock notifier to update the cached divider value each time the clock rate actually changes. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-04-02Merge tag 'arch-removal' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pul removal of obsolete architecture ports from Arnd Bergmann: "This removes the entire architecture code for blackfin, cris, frv, m32r, metag, mn10300, score, and tile, including the associated device drivers. I have been working with the (former) maintainers for each one to ensure that my interpretation was right and the code is definitely unused in mainline kernels. Many had fond memories of working on the respective ports to start with and getting them included in upstream, but also saw no point in keeping the port alive without any users. In the end, it seems that while the eight architectures are extremely different, they all suffered the same fate: There was one company in charge of an SoC line, a CPU microarchitecture and a software ecosystem, which was more costly than licensing newer off-the-shelf CPU cores from a third party (typically ARM, MIPS, or RISC-V). It seems that all the SoC product lines are still around, but have not used the custom CPU architectures for several years at this point. In contrast, CPU instruction sets that remain popular and have actively maintained kernel ports tend to all be used across multiple licensees. [ See the new nds32 port merged in the previous commit for the next generation of "one company in charge of an SoC line, a CPU microarchitecture and a software ecosystem" - Linus ] The removal came out of a discussion that is now documented at https://lwn.net/Articles/748074/. Unlike the original plans, I'm not marking any ports as deprecated but remove them all at once after I made sure that they are all unused. Some architectures (notably tile, mn10300, and blackfin) are still being shipped in products with old kernels, but those products will never be updated to newer kernel releases. After this series, we still have a few architectures without mainline gcc support: - unicore32 and hexagon both have very outdated gcc releases, but the maintainers promised to work on providing something newer. At least in case of hexagon, this will only be llvm, not gcc. - openrisc, risc-v and nds32 are still in the process of finishing their support or getting it added to mainline gcc in the first place. They all have patched gcc-7.3 ports that work to some degree, but complete upstream support won't happen before gcc-8.1. Csky posted their first kernel patch set last week, their situation will be similar [ Palmer Dabbelt points out that RISC-V support is in mainline gcc since gcc-7, although gcc-7.3.0 is the recommended minimum - Linus ]" This really says it all: 2498 files changed, 95 insertions(+), 467668 deletions(-) * tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (74 commits) MAINTAINERS: UNICORE32: Change email account staging: iio: remove iio-trig-bfin-timer driver tty: hvc: remove tile driver tty: remove bfin_jtag_comm and hvc_bfin_jtag drivers serial: remove tile uart driver serial: remove m32r_sio driver serial: remove blackfin drivers serial: remove cris/etrax uart drivers usb: Remove Blackfin references in USB support usb: isp1362: remove blackfin arch glue usb: musb: remove blackfin port usb: host: remove tilegx platform glue pwm: remove pwm-bfin driver i2c: remove bfin-twi driver spi: remove blackfin related host drivers watchdog: remove bfin_wdt driver can: remove bfin_can driver mmc: remove bfin_sdh driver input: misc: remove blackfin rotary driver input: keyboard: remove bf54x driver ...
2018-03-26i2c: remove bfin-twi driverArnd Bergmann
The blackfin architecture is getting removed, so the twi driver can also be removed. Acked-by: Aaron Wu <aaron.wu@analog.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-24i2c: make i2c_check_addr_validity() staticWolfram Sang
After previous refactoring, there is only one user in the same file left. Make the function static now. [wsa: added 'int' to bare 'unsigned'] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-24i2c: rcar: fix mask value of prohibited bitHiromitsu Yamasaki
According to documentation, Bit 7 of ICMSR is unused and 0 should be written to it. Fix the mask accordingly. Signed-off-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com> [wsa: edited commit message] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-24Merge tag 'at24-4.17-updates-for-wolfram' of ↵Wolfram Sang
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-4.17 "three new special cases for device tree compatible strings"
2018-03-24i2c: i2c-stm32f7: fix no check on returned setupPierre-Yves MORDRET
Before assigning returned setup structure check if not null Fixes: 463a9215f3ca7600b5ff ("i2c: stm32f7: fix setup structure") Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2018-03-24i2c: pca-platform: use device_property_read_u32Chris Packham
Use device_property_read_u32 instead of of_property_read_u32_index to lookup the "clock-frequency" property. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-24i2c: pca-platform: unconditionally use devm_gpiod_get_optionalChris Packham
Allow for the reset-gpios property to be defined in the device tree or via a GPIO lookup table. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-24i2c: qup: reorganization of driver code to remove polling for qup v2Abhishek Sahu
Following are the major issues in current driver code 1. The current driver simply assumes the transfer completion whenever its gets any non-error interrupts and then simply do the polling of available/free bytes in FIFO. 2. The block mode is not working properly since no handling in being done for OUT_BLOCK_WRITE_REQ and IN_BLOCK_READ_READ. 3. An i2c transfer can contain multiple message and QUP v2 supports reconfiguration during run in which the mode should be same for all the sub transfer. Currently the mode is being programmed before every sub transfer which is functionally wrong. If one message is less than FIFO length and other message is greater than FIFO length, then transfers will fail. Because of above, i2c v2 transfers of size greater than 64 are failing with following error message i2c_qup 78b6000.i2c: timeout for fifo out full To make block mode working properly and move to use the interrupts instead of polling, major code reorganization is required. Following are the major changes done in this patch 1. Remove the polling of TX FIFO free space and RX FIFO available bytes and move to interrupts completely. QUP has QUP_MX_OUTPUT_DONE, QUP_MX_INPUT_DONE, OUT_BLOCK_WRITE_REQ and IN_BLOCK_READ_REQ interrupts to handle FIFO’s properly so check all these interrupts. 2. Determine the mode for transfer before starting by checking all the tx/rx data length in each message. The complete message can be transferred either in DMA mode or Programmed IO by FIFO/Block mode. in DMA mode, both tx and rx uses same mode but in PIO mode, the TX and RX can be in different mode. 3. During write, For FIFO mode, TX FIFO can be directly written without checking for FIFO space. For block mode, the QUP will generate OUT_BLOCK_WRITE_REQ interrupt whenever it has block size of available space. 4. During read, both TX and RX FIFO will be used. TX will be used for writing tags and RX will be used for receiving the data. In QUP, TX and RX can operate in separate mode so configure modes accordingly. 5. For read FIFO mode, wait for QUP_MX_INPUT_DONE interrupt which will be generated after all the bytes have been copied in RX FIFO. For read Block mode, QUP will generate IN_BLOCK_READ_REQ interrupts whenever it has block size of available data. 6. Split the transfer in chunk of one QUP block size(256 bytes) and schedule each block separately. QUP v2 supports reconfiguration during run in which QUP can transfer multiple blocks without issuing a stop events. 7. Port the SMBus block read support for new code changes. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Reviewed-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-24i2c: qup: reorganization of driver code to remove polling for qup v1Abhishek Sahu
Following are the major issues in current driver code 1. The current driver simply assumes the transfer completion whenever its gets any non-error interrupts and then simply do the polling of available/free bytes in FIFO. 2. The block mode is not working properly since no handling in being done for OUT_BLOCK_WRITE_REQ and IN_BLOCK_READ_REQ. Because of above, i2c v1 transfers of size greater than 32 are failing with following error message i2c_qup 78b6000.i2c: timeout for fifo out full To make block mode working properly and move to use the interrupts instead of polling, major code reorganization is required. Following are the major changes done in this patch 1. Remove the polling of TX FIFO free space and RX FIFO available bytes and move to interrupts completely. QUP has QUP_MX_OUTPUT_DONE, QUP_MX_INPUT_DONE, OUT_BLOCK_WRITE_REQ and IN_BLOCK_READ_REQ interrupts to handle FIFO’s properly so check all these interrupts. 2. During write, For FIFO mode, TX FIFO can be directly written without checking for FIFO space. For block mode, the QUP will generate OUT_BLOCK_WRITE_REQ interrupt whenever it has block size of available space. 3. During read, both TX and RX FIFO will be used. TX will be used for writing tags and RX will be used for receiving the data. In QUP, TX and RX can operate in separate mode so configure modes accordingly. 4. For read FIFO mode, wait for QUP_MX_INPUT_DONE interrupt which will be generated after all the bytes have been copied in RX FIFO. For read Block mode, QUP will generate IN_BLOCK_READ_REQ interrupts whenever it has block size of available data. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Reviewed-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-24i2c: qup: send NACK for last read sub transfersAbhishek Sahu
According to I2c specification, “If a master-receiver sends a repeated START condition, it sends a not-acknowledge (A) just before the repeated START condition”. QUP v2 supports sending of NACK without stop with QUP_TAG_V2_DATARD_NACK so added the same. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Reviewed-by: Austin Christ <austinwc@codeaurora.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-24i2c: qup: fix buffer overflow for multiple msg of maximum xfer lenAbhishek Sahu
The BAM mode requires buffer for start tag data and tx, rx SG list. Currently, this is being taken for maximum transfer length (65K). But an I2C transfer can have multiple messages and each message can be of this maximum length so the buffer overflow will happen in this case. Since increasing buffer length won’t be feasible since an I2C transfer can contain any number of messages so this patch does following changes to make i2c transfers working for multiple messages case. 1. Calculate the required buffers for 2 maximum length messages (65K * 2). 2. Split the descriptor formation and descriptor scheduling. The idea is to fit as many messages in one DMA transfers for 65K threshold value (max_xfer_sg_len). Whenever the sg_cnt is crossing this, then schedule the BAM transfer and subsequent transfer will again start from zero. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-24i2c: qup: change completion timeout according to transfer lengthAbhishek Sahu
Currently the completion timeout is being taken according to maximum transfer length which is too high if SCL is operating in high frequency. This patch calculates timeout on the basis of one-byte transfer time and uses the same for completion timeout. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-24i2c: qup: use the complete transfer length to choose DMA modeAbhishek Sahu
Currently each message length in complete transfer is being checked for determining DMA mode and if any of the message length is less than FIFO length then non DMA mode is being used which will increase overhead. DMA can be used for any length and it should be determined with complete transfer length. Now, this patch selects DMA mode if the total length is greater than FIFO length. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Reviewed-by: Austin Christ <austinwc@codeaurora.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-24i2c: qup: proper error handling for i2c error in BAM modeAbhishek Sahu
Currently the i2c error handling in BAM mode is not working properly in stress condition. 1. After an error, the FIFO are being written with FLUSH and EOT tags which should not be required since already these tags have been written in BAM descriptor itself. 2. QUP state is being moved to RESET in IRQ handler in case of error. When QUP HW encounters an error in BAM mode then it moves the QUP STATE to PAUSE state. In this case, I2C_FLUSH command needs to be executed while moving to RUN_STATE by writing to the QUP_STATE register with the I2C_FLUSH bit set to 1. 3. In Error case, sometimes, QUP generates more than one interrupt which will trigger the complete again. After an error, the flush operation will be scheduled after doing reinit_completion which should be triggered by BAM IRQ callback. If the second QUP IRQ comes during this time then it will call the complete and the transfer function will assume the all the BAM HW descriptors have been completed. 4. The release DMA is being called after each error which will free the DMA tx and rx channels. The error like NACK is very common in I2C transfer and every time this will be overhead. Now, since the error handling is proper so this release channel can be completely avoided. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Reviewed-by: Sricharan R <sricharan@codeaurora.org> Reviewed-by: Austin Christ <austinwc@codeaurora.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-24i2c: qup: fix the transfer length for BAM RX EOT FLUSH tagsAbhishek Sahu
In case of FLUSH operation, BAM copies INPUT EOT FLUSH (0x94) instead of normal EOT (0x93) tag in input data stream when an input EOT tag is received during flush operation. So only one tag will be written instead of 2 separate tags. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-24i2c: qup: schedule EOT and FLUSH tags at the end of transferAbhishek Sahu
The role of FLUSH and EOT tag is to flush already scheduled descriptors in BAM HW in case of error. EOT is required only when descriptors are scheduled in RX FIFO. If all the messages are WRITE, then only FLUSH tag will be used. A single BAM transfer can have multiple read and write messages. The EOT and FLUSH tags should be scheduled at the end of BAM HW descriptors. Since the READ and WRITE can be present in any order so for some of the cases, these tags are not being written correctly. Following is one of the example READ, READ, READ, READ Currently EOT and FLUSH tags are being written after each READ. If QUP gets NACK for first READ itself, then flush will be triggered. It will look for first FLUSH tag in TX FIFO and will stop there so only descriptors for first READ descriptors be flushed. All the scheduled descriptors should be cleared to generate BAM DMA completion. Now this patch is scheduling FLUSH and EOT only once after all the descriptors. So, flush will clear all the scheduled descriptors and BAM will generate the completion interrupt. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Reviewed-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-24i2c: qup: remove redundant variables for BAM SG countAbhishek Sahu
The rx_nents and tx_nents are redundant. rx_buf and tx_buf can be used for total number of SG entries. Since rx_buf and tx_buf give the impression that it is buffer instead of count so rename it to tx_cnt and rx_cnt for giving it more meaningful variable name. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Reviewed-by: Austin Christ <austinwc@codeaurora.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-24i2c: qup: minor code reorganization for use_dmaAbhishek Sahu
1. Assigns use_dma in qup_dev structure itself which will help in subsequent patches to determine the mode in IRQ handler. 2. Does minor code reorganization for loops to reduce the unnecessary comparison and assignment. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Reviewed-by: Austin Christ <austinwc@codeaurora.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-24i2c: qup: fixed releasing dma without flush operation completionAbhishek Sahu
The QUP BSLP BAM generates the following error sometimes if the current I2C DMA transfer fails and the flush operation has been scheduled “bam-dma-engine 7884000.dma: Cannot free busy channel” If any I2C error comes during BAM DMA transfer, then the QUP I2C interrupt will be generated and the flush operation will be carried out to make I2C consume all scheduled DMA transfer. Currently, the same completion structure is being used for BAM transfer which has already completed without reinit. It will make flush operation wait_for_completion_timeout completed immediately and will proceed for freeing the DMA resources where the descriptors are still in process. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Acked-by: Sricharan R <sricharan@codeaurora.org> Reviewed-by: Austin Christ <austinwc@codeaurora.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-24i2c: qup: fix copyrights and update to SPDX identifierAbhishek Sahu
The file has been updated from 2016 to 2018 so fixed the copyright years. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-17i2c: xlp9xx: Handle NACK on DATA properlyGeorge Cherian
In case we receive NACK on DATA we shouldn't be resetting the controller, rather we should issue STOP command. This will terminate the current transaction and -EIO is returned. While at that handle the SMBus Quick Command properly. We shouldn't be setting the XLP9XX_I2C_CMD_READ/WRITE for such transactions. Signed-off-by: George Cherian <george.cherian@cavium.com> Reviewed-by: Jan Glauber <jglauber@cavium.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-17i2c: xlp9xx: Check for Bus state before every transferGeorge Cherian
I2C bus enters the STOP condition after the DATA_DONE interrupt is raised. Essentially the driver should be checking the bus state before sending any transaction. In case a transaction is initiated while the bus is busy, the prior transaction's stop condition is not achieved. Add the check to make sure the bus is not busy before every transaction. Signed-off-by: George Cherian <george.cherian@cavium.com> Reviewed-by: Jan Glauber <jglauber@cavium.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-17i2c: designware: suppress unneeded SDA hold time warningsAlexander Monakov
The hardware may not support SDA hold time configuration, but if it is not set in the Device Tree either, there is no need to print a warning. Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Alexander Monakov <amonakov@ispras.ru> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-17i2c: mv64xxx: Apply errata delay only in standard modeGregory CLEMENT
The errata FE-8471889 description has been updated. There is still a timing violation for repeated start. But the errata now states that it was only the case for the Standard mode (100 kHz), in Fast mode (400 kHz) there is no issue. This patch limit the errata fix to the Standard mode. It has been tesed successfully on the clearfog (Aramda 388 based board). Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-17i2c: xiic: Make suspend function names consistentMoritz Fischer
Suspend functions seem to have been copied from i2c-cadence driver. Rename the functions to match the rest of the driver. Signed-off-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-17Merge branch 'i2c-mux/for-next' of https://github.com/peda-r/i2c-mux into ↵Wolfram Sang
i2c/for-4.17 "These patches verify the device id of the PCA984x mux chips using standardized (but rarely implemented) i2c device identification."
2018-03-07Merge tag 'metag_remove_2' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jhogan/metag into asm-generic Remove metag architecture These patches remove the metag architecture and tightly dependent drivers from the kernel. With the 4.16 kernel the ancient gcc 4.2.4 based metag toolchain we have been using is hitting compiler bugs, so now seems a good time to drop it altogether. * tag 'metag_remove_2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: i2c: img-scb: Drop METAG dependency media: img-ir: Drop METAG dependency watchdog: imgpdc: Drop METAG dependency MAINTAINERS/CREDITS: Drop METAG ARCHITECTURE tty: Remove metag DA TTY and console driver clocksource: Remove metag generic timer driver irqchip: Remove metag irqchip drivers Drop a bunch of metag references docs: Remove remaining references to metag docs: Remove metag docs metag: Remove arch/metag/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-06i2c: mux: pca954x: verify the device id of the pca984x chipsPeter Rosin
Make sure to not disallow the chips on adapters that are not capable of reading the device id, but also make sure to check the device id before writing to the chip. Tested-by: Adrian Fiergolski <adrian.fiergolski@cern.ch> Signed-off-by: Peter Rosin <peda@axentia.se>
2018-03-06i2c: add i2c_get_device_id() to get the standard i2c device idPeter Rosin
Can be used during probe to double check that the probed device is what is expected. Loosely based on code from Adrian Fiergolski <adrian.fiergolski@cern.ch>. Tested-by: Adrian Fiergolski <adrian.fiergolski@cern.ch> Reviewed-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Peter Rosin <peda@axentia.se>
2018-03-05i2c: img-scb: Drop METAG dependencyJames Hogan
Now that arch/metag/ has been removed, remove the METAG dependency from the IMG SCB I2C device driver. The hardware is also present on MIPS SoCs so the driver still has value. Signed-off-by: James Hogan <jhogan@kernel.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> Cc: linux-i2c@vger.kernel.org Cc: linux-metag@vger.kernel.org
2018-03-05i2c: core: report OF style module alias for devices registered via OFJavier Martinez Canillas
The buses should honor the firmware interface used to register the device, but the I2C core reports a MODALIAS of the form i2c:<device> even for I2C devices registered via OF. This means that user-space will never get an OF stype uevent MODALIAS even when the drivers modules contain aliases exported from both the I2C and OF device ID tables. For example, an Atmel maXTouch Touchscreen registered by a DT node with compatible "atmel,maxtouch" has the following module alias: $ cat /sys/class/i2c-adapter/i2c-8/8-004b/modalias i2c:maxtouch So udev won't be able to auto-load a module for an OF-only device driver. Many OF-only drivers duplicate the OF device ID table entries in an I2C ID table only has a workaround for how the I2C core reports the module alias. This patch changes the I2C core to report an OF related MODALIAS uevent if the device was registered via OF. So for the previous example, after this patch, the reported MODALIAS for the Atmel maXTouch will be the following: $ cat /sys/class/i2c-adapter/i2c-8/8-004b/modalias of:NtrackpadT<NULL>Catmel,maxtouch NOTE: This patch may break out-of-tree drivers that were relying on this behavior, and only had an I2C device ID table even when the device was registered via OF. There are no remaining drivers in mainline that do this, but out-of-tree drivers have to be fixed and define a proper OF device ID table to have module auto-loading working. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Tested-by: Dmitry Mastykin <mastichi@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-02i2c: scmi: Use standard device message logging functionsJean Delvare
ACPI_ERROR and ACPI_DEBUG_PRINT are not intended to be used by device drivers. Use acpi_handle message logging functions instead. As a nice side effect, it removes the following compiler warnings which were printed when ACPI debug is disabled: drivers/i2c/busses/i2c-scmi.c: In function "acpi_smbus_cmi_add_cap": drivers/i2c/busses/i2c-scmi.c:328:39: warning: suggest braces around empty body in an "else" statement [-Wempty-body] drivers/i2c/busses/i2c-scmi.c:338:12: warning: suggest braces around empty body in an "else" statement [-Wempty-body] Suggested-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-02i2c: piix4: Use request_muxed_regionGuenter Roeck
Accesses to SB800_PIIX4_SMB_IDX can occur from multiple drivers. One example for another driver is the sp5100_tco driver. Use request_muxed_region() to ensure synchronization. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-02i2c: piix4: Use usleep_range()Guenter Roeck
The piix4 i2c driver is extremely slow. Replacing msleep() with usleep_range() increases its speed substantially. Use sleep ranges similar to those used in the i2c-801 driver to keep things simple. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-03-02i2c: octeon: Prevent error message on bus errorJan Glauber
The error message: [Fri Feb 16 13:42:13 2018] i2c-thunderx 0000:01:09.4: unhandled state: 0 is mis-leading as state 0 (bus error) is not an unknown state. Return -EIO as before but avoid printing the message. Also rename STAT_ERROR to STATE_BUS_ERROR. Signed-off-by: Jan Glauber <jglauber@cavium.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-02-27i2c: reformat comments around i2c_smbus_xfer_emulated()Wolfram Sang
Use Kernel coding style for better readability. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Reviewed-by: Peter Rosin <peda@axentia.se>