summaryrefslogtreecommitdiff
path: root/drivers/ide/ide-io.c
AgeCommit message (Collapse)Author
2019-01-31ide: ensure atapi sense request aren't preemptedJens Axboe
There's an issue with how sense requests are handled in IDE. If ide-cd encounters an error, it queues a sense request. With how IDE request handling is done, this is the next request we need to handle. But it's impossible to guarantee this, as another request could come in between the sense being queued, and ->queue_rq() being run and handling it. If that request ALSO fails, then we attempt to doubly queue the single sense request we have. Since we only support one active request at the time, defer request processing when a sense request is queued. Fixes: 600335205b8d "ide: convert to blk-mq" Reported-by: He Zhe <zhe.he@windriver.com> Tested-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-15ide: clear ide_req()->special for non-passthrough requestsJens Axboe
The initial patch cleared this for all requests, which is wrong since internal uses can't have this cleared as that's what they are using to pass data. The fix moved the initialization to the mq_ops->initialize_rq_fn(), but that's only a partial fix since it only catches uses from blk_get_request(), not requests coming from the file system. Keep the non-fs initialization, and add the IDE entry clear IFF RQF_DONTPREP isn't set and it's a passthrough request. Fixes: d16a67667c61 ("ide: don't clear special on ide_queue_rq() entry") Fixes: 22ce0a7ccf23 ("ide: don't use req->special") Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-12ide: don't clear special on ide_queue_rq() entryJens Axboe
We can't use RQF_DONTPREP to see if we should clear ->special, as someone could have set that while inserting the request. Make sure we clear it in our ->initialize_rq_fn() helper instead. Fixes: 22ce0a7ccf23 ("ide: don't use req->special") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-10ide: don't use req->specialChristoph Hellwig
Just replace it with a field of the same name in struct ide_req. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-09ide: cleanup ->prep_rq calling conventionChristoph Hellwig
The return value is just used as a binary yes/no decision, so switch it to a bool instead of the old BLKPREP_* values returned as an int. Also clean up a few related comments. Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07ide: convert to blk-mqJens Axboe
ide-disk and ide-cd tested as working just fine, ide-tape and ide-floppy haven't. But the latter don't require changes, so they should work without issue. Add helper function to insert a request from a work queue, since we cannot invoke the blk-mq request insertion from IRQ context. Cc: David Miller <davem@davemloft.net> Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-13ide: remove redundant variables queue_run_ms and leftColin Ian King
Variable queue_run_ms is not being used and is redundant and hence can be removed. Removing this also means that variable left can also be removed. Cleans up clang warning: warning: variable ‘queue_run_ms’ set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-05ide: Handle irq disabling consistentlySebastian Andrzej Siewior
ide_timer_expiry() disables interrupt at function entry when acquiring hwif->lock. Before disabling the device interrupt it unlocks hwif->lock, but interrupts stay disabled. After the call to disable_irq() interrupts are disabled again, which is a pointless exercise. After the device irq handler has been invoked with interrupts disabled, hwif->lock is acquired again with spin_lock_irq() because the device irq handler might have reenabled interrupts. This is not documented and confusing for the casual reader. Remove the redundant local_irq_disable() and add a comment which explains why hwif->lock has to be reacquired with spin_lock_irq(). Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-06ide: Convert timers to use timer_setup()Kees Cook
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-ide@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org>
2017-06-09block: introduce new block status code typeChristoph Hellwig
Currently we use nornal Linux errno values in the block layer, and while we accept any error a few have overloaded magic meanings. This patch instead introduces a new blk_status_t value that holds block layer specific status codes and explicitly explains their meaning. Helpers to convert from and to the previous special meanings are provided for now, but I suspect we want to get rid of them in the long run - those drivers that have a errno input (e.g. networking) usually get errnos that don't know about the special block layer overloads, and similarly returning them to userspace will usually return somethings that strictly speaking isn't correct for file system operations, but that's left as an exercise for later. For now the set of errors is a very limited set that closely corresponds to the previous overloaded errno values, but there is some low hanging fruite to improve it. blk_status_t (ab)uses the sparse __bitwise annotations to allow for sparse typechecking, so that we can easily catch places passing the wrong values. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-08ide: don't call memcpy with the same source and destinationMikulas Patocka
The parisc architecture recently reimplemented the memcpy function and their reimplementation crashed when source and destination overlapped. The crash happened in the function ide_complete_cmd where memcpy is called with the same source and destination pointer. According to the C specification, memcpy behavior is undefined if the source and destination range overlaps. This patches fixes the undefined behavior. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20scsi: introduce a result field in struct scsi_requestChristoph Hellwig
This passes on the scsi_cmnd result field to users of passthrough requests. Currently we abuse req->errors for this purpose, but that field will go away in its current form. Note that the old IDE code abuses the errors field in very creative ways and stores all kinds of different values in it. I didn't dare to touch this magic, so the abuses are brought forward 1:1. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-31block: fold cmd_type into the REQ_OP_ spaceChristoph Hellwig
Instead of keeping two levels of indirection for requests types, fold it all into the operations. The little caveat here is that previously cmd_type only applied to struct request, while the request and bio op fields were set to plain REQ_OP_READ/WRITE even for passthrough operations. Instead this patch adds new REQ_OP_* for SCSI passthrough and driver private requests, althought it has to add two for each so that we can communicate the data in/out nature of the request. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-31ide: don't abuse cmd_typeChristoph Hellwig
Currently the legacy ide driver defines several request types of it's own, which is in the way of removing that field entirely. Instead add a type field to struct ide_request and use that to distinguish the different types of IDE-internal requests. It's a bit of a mess, but so is the surrounding code.. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-27block: split scsi_request out of struct requestChristoph Hellwig
And require all drivers that want to support BLOCK_PC to allocate it as the first thing of their private data. To support this the legacy IDE and BSG code is switched to set cmd_size on their queues to let the block layer allocate the additional space. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-28block: split out request-only flags into a new namespaceChristoph Hellwig
A lot of the REQ_* flags are only used on struct requests, and only of use to the block layer and a few drivers that dig into struct request internals. This patch adds a new req_flags_t rq_flags field to struct request for them, and thus dramatically shrinks the number of common requests. It also removes the unfortunate situation where we have to fit the fields from the same enum into 32 bits for struct bio and 64 bits for struct request. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Shaun Tancheff <shaun.tancheff@seagate.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-05block: move PM request support to IDEChristoph Hellwig
This removes the request types and hacks from the block code and into the old IDE driver. There is a small amunt of code duplication due to this, but it's not too bad. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-05block: rename REQ_TYPE_SPECIAL to REQ_TYPE_DRV_PRIVChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2011-04-05ide: always ensure that blk_delay_queue() is called if we have pending IOJens Axboe
Just because we are not requeuing a request does not mean that some aren't pending. So always issue a blk_delay_queue() if either we are requeueing OR there's pending IO. This fixes a boot problem for some IDE boxes. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-05ide: ide_requeue_and_plug() reinstate "always plug" behaviourJens Axboe
We see stalls if we don't always ensure that the queue gets run again. Even if rq == NULL, we could have other pending requests in the queue. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-26ide: ensure that we re-run the queue handlerJens Axboe
The conversion to blk_delay_queue() missed parts of IDE. Add a blk_delay_queue() to ensure that the request handler gets reinvoked when it needs to. Note that in all but one place the old plug re-run delay of 3 msecs is used, even though it probably could be shorter for performance reasons in some of those cases. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10block: remove per-queue pluggingJens Axboe
Code has been converted over to the new explicit on-stack plugging, and delay users have been converted to use the new API for that. So lets kill off the old plugging along with aops->sync_page(). Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10ide: remove unnecessary blk_queue_flushing() test in do_ide_request()Tejun Heo
Unplugging from a request function doesn't really help much (it's already in the request_fn) and soon block layer will be updated to mix barrier sequence with other commands, so there's no need to treat queue flushing any differently. ide was the only user of blk_queue_flushing(). Remove it. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07block: fix some more cmd_type cleanup falloutChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07block: remove wrappers for request type/flagsChristoph Hellwig
Remove all the trivial wrappers for the cmd_type and cmd_flags fields in struct requests. This allows much easier grepping for different request types instead of unwinding through macros. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-04-01ide: Requeue request after DMA timeoutHerbert Xu
I noticed that my KVM virtual machines were experiencing IDE issues resulting in processes stuck on waiting for buffers to complete. The root cause is of course race conditions in the ancient qemu backend that I'm using. However, the fact that the guest isn't recovering is a bug. I've tracked it down to the change made last year to dequeue requests at the start rather than at the end in the IDE layer. commit 8f6205cd572fece673da0255d74843680f67f879 Author: Tejun Heo <tj@kernel.org> Date: Fri May 8 11:53:59 2009 +0900 ide: dequeue in-flight request The problem is that the function ide_dma_timeout_retry does not requeue the current request, causing one request to be lost for each DMA timeout. This patch fixes this by requeueing the request. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-06Revert "ide: improve handling of Power Management requests"David S. Miller
This reverts commit a1317f714af7aed60ddc182d0122477cbe36ee9b.
2009-06-25ide: always kill the whole request on errorBartlomiej Zolnierkiewicz
* Use blk_rq_bytes() instead of obsolete ide_rq_bytes() in ide_kill_rq() and ide_floppy_do_request() for failed requests. [ bugfix part ] * Use blk_rq_bytes() instead of obsolete ide_rq_bytes() in ide_do_devset() and ide_complete_drive_reset(). Then remove ide_rq_bytes(). [ cleanup part ] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-25ide: fix ide_kill_rq() for special ide-{floppy,tape} driver requestsBartlomiej Zolnierkiewicz
Such requests should be failed with -EIO (like all other requests in this function) instead of being completed successfully. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-24ide: improve handling of Power Management requestsBartlomiej Zolnierkiewicz
Make hwif->rq point to PM request during PM sequence and do not allow any other types of requests to slip in (the old comment was never correct as there should be no such requests generated during PM sequence). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-15ide: move ack_intr() method into 'struct ide_port_ops' (take 2)Sergei Shtylyov
Move the ack_intr() method into 'struct ide_port_ops', also renaming it to test_irq() while at it... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15ide: move IRQ clearing from ack_intr() method to clear_irq() method (take 2)Sergei Shtylyov
There are now two methods that clear the port interrupt: ack_intr() method, implemented only on M680x0 machines, that is called at the start of ide_intr(), and clear_irq() method, that is called somewhat later in this function. In order to stop this duplication, delegate the task of clearing the interrupt to clear_irq() method, only leaving to ack_intr() the task of testing for the port interrupt. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15ide: call clear_irq() method in ide_timer_expiry()Sergei Shtylyov
Now the clear_irq() method is called only from ide_intr() but ide_timer_expiry() also should call this method in case when drive_is_ready() succeeds... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-12Merge branch 'for-2.6.31' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6 * 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (29 commits) ide: re-implement ide_pci_init_one() on top of ide_pci_init_two() ide: unexport ide_find_dma_mode() ide: fix PowerMac bootup oops ide: skip probe if there are no devices on the port (v2) sl82c105: add printk() logging facility ide-tape: fix proc warning ide: add IDE_DFLAG_NIEN_QUIRK device flag ide: respect quirk_drives[] list on all controllers hpt366: enable all quirks for devices on quirk_drives[] list hpt366: sync quirk_drives[] list with pdc202xx_{new,old}.c ide: remove superfluous SELECT_MASK() call from do_rw_taskfile() ide: remove superfluous SELECT_MASK() call from ide_driveid_update() icside: remove superfluous ->maskproc method ide-tape: fix IDE_AFLAG_* atomic accesses ide-tape: change IDE_AFLAG_IGNORE_DSC non-atomically pdc202xx_old: kill resetproc() method pdc202xx_old: don't call pdc202xx_reset() on IRQ timeout pdc202xx_old: use ide_dma_test_irq() ide: preserve Host Protected Area by default (v2) ide-gd: implement block device ->set_capacity method (v2) ...
2009-06-07ide: add IDE_DFLAG_NIEN_QUIRK device flagBartlomiej Zolnierkiewicz
Add IDE_DFLAG_NIEN_QUIRK device flag and use it instead of drive->quirk_list. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-22Merge branch 'master' into for-2.6.31Jens Axboe
Conflicts: drivers/ide/ide-io.c Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-22Merge branch 'for-linus' into for-nextBartlomiej Zolnierkiewicz
2009-05-22ide: fix OOPS during ide-cd error recoveryBartlomiej Zolnierkiewicz
On Tuesday 19 May 2009 20:29:28 Martin Lottermoser wrote: > hdc: cdrom_decode_status: error=0x40 <3>{ LastFailedSense=0x04 } > ide: failed opcode was: unknown > hdc: DMA disabled > ------------[ cut here ]------------ > kernel BUG at drivers/ide/ide-io.c:872! It is possible for ide-cd to ignore ide_error()'s return value under some circumstances. Workaround it in ide_intr() and ide_timer_expiry() by checking if there is a device/port reset pending currently. Fixes bug #13345: http://bugzilla.kernel.org/show_bug.cgi?id=13345 Reported-by: Martin Lottermoser <Martin.Lottermoser@t-online.de> Reported-and-tested-by: Modestas Vainius <modestas@vainius.eu> Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-17ide: replace special_t typedef by IDE_SFLAG_* flagsBartlomiej Zolnierkiewicz
Replace: - special_t typedef by IDE_SFLAG_* flags - 'special_t special' ide_drive_t's field by 'u8 special_flags' one There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-17ide: merge ide_disk_special() into do_special() (v2)Bartlomiej Zolnierkiewicz
While at it: - change debug printk() level to KERN_DEBUG and use __func__ - update documentation v2: - fix DEBUG build (noticed by Sergei) There should be no functional changes caused by this patch. Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-17ide: BUG() on unknown flags in ide_disk_special()Bartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-11block: implement and enforce request peek/start/fetchTejun Heo
Till now block layer allowed two separate modes of request execution. A request is always acquired from the request queue via elv_next_request(). After that, drivers are free to either dequeue it or process it without dequeueing. Dequeue allows elv_next_request() to return the next request so that multiple requests can be in flight. Executing requests without dequeueing has its merits mostly in allowing drivers for simpler devices which can't do sg to deal with segments only without considering request boundary. However, the benefit this brings is dubious and declining while the cost of the API ambiguity is increasing. Segment based drivers are usually for very old or limited devices and as converting to dequeueing model isn't difficult, it doesn't justify the API overhead it puts on block layer and its more modern users. Previous patches converted all block low level drivers to dequeueing model. This patch completes the API transition by... * renaming elv_next_request() to blk_peek_request() * renaming blkdev_dequeue_request() to blk_start_request() * adding blk_fetch_request() which is combination of peek and start * disallowing completion of queued (not started) requests * applying new API to all LLDs Renamings are for consistency and to break out of tree code so that it's apparent that out of tree drivers need updating. [ Impact: block request issue API cleanup, no functional change ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Mike Miller <mike.miller@hp.com> Cc: unsik Kim <donari75@gmail.com> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Tim Waugh <tim@cyberelk.net> Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: David S. Miller <davem@davemloft.net> Cc: Laurent Vivier <Laurent@lvivier.info> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Adrian McMenamin <adrian@mcmen.demon.co.uk> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: Pierre Ossman <drzeus@drzeus.cx> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Markus Lidel <Markus.Lidel@shadowconnect.com> Cc: Stefan Weinhuber <wein@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11ide: dequeue in-flight requestTejun Heo
ide generally has single request in flight and tracks it using hwif->rq and all state handlers follow the following convention. * ide_started is returned if the request is in flight. * ide_stopped is returned if the queue needs to be restarted. The request might or might not have been processed fully or partially. * hwif->rq is set to NULL, when an issued request completes. So, dequeueing model can be implemented by dequeueing after fetch, requeueing if hwif->rq isn't NULL on ide_stopped return and doing about the same thing on completion / port unlock paths. These changes can be made in ide-io proper. In addition to the above main changes, the following updates are necessary. * ide-cd shouldn't dequeue a request when issuing REQUEST SENSE for it as the request is already dequeued. * ide-atapi uses request queue as stack when issuing REQUEST SENSE to put the REQUEST SENSE in front of the failed request. This now needs to be done using requeueing. [ Impact: dequeue in-flight request ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11ide: cleanup rq->data_len usagesTejun Heo
With recent unification of fields, it's now guaranteed that rq->data_len always equals blk_rq_bytes(). Convert all direct users to accessors. [ Impact: convert direct rq->data_len usages to blk_rq_bytes() ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11ide: convert to rq pos and nr_sectors accessorsTejun Heo
ide doesn't manipulate request fields anymore and thus all hard and their soft equivalents are always equal. Convert all references to accessors. [ Impact: use pos and nr_sectors accessors ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11block: implement blk_rq_pos/[cur_]sectors() and convert obvious onesTejun Heo
Implement accessors - blk_rq_pos(), blk_rq_sectors() and blk_rq_cur_sectors() which return rq->hard_sector, rq->hard_nr_sectors and rq->hard_cur_sectors respectively and convert direct references of the said fields to the accessors. This is in preparation of request data length handling cleanup. Geert : suggested adding const to struct request * parameter to accessors Sergei : spotted error in patch description [ Impact: cleanup ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Tested-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Grant Likely <grant.likely@secretlab.ca> Ackec-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-28ide: drop rq->data handling from ide_map_sg()Tejun Heo
Impact: remove code path which is no longer necessary All IDE data transfers now use rq->bio. Simplify ide_map_sg() accordingly. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk>
2009-04-28ide-pm: don't abuse rq->dataTejun Heo
Impact: cleanup rq->data usage ide-pm uses rq->data to carry pointer to struct request_pm_state through request queue and rq->special is used to carray pointer to local struct ide_cmd, which isn't necessary. Use rq->special for request_pm_state instead and use local ide_cmd in ide_start_power_step(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk>
2009-04-28ide-cd,atapi: use bio for internal commandsTejun Heo
Impact: unify request data buffer handling rq->data is used mostly to pass kernel buffer through request queue without using bio. There are only a couple of places which still do this in kernel and converting to bio isn't difficult. This patch converts ide-cd and atapi to use bio instead of rq->data for request sense and internal pc commands. With previous change to unify sense request handling, this is relatively easily achieved by adding blk_rq_map_kern() during sense_rq prep and PC issue. If blk_rq_map_kern() fails for sense, the error is deferred till sense issue and aborts the failed command which triggered the sense. Note that this is a slim possibility as sense prep is done on each command issue, so for the above condition to actually trigger, all preps since the last sense issue till the issue of the request which would require a sense should fail. * do_request functions might sleep now. This should be okay as ide request_fn - do_ide_request() - is invoked only from make_request and plug work. Make sure this is the case by adding might_sleep() to do_ide_request(). * Functions which access the read sense data before the sense request is complete now should access bio_data(sense_rq->bio) as the sense buffer might have been copied during blk_rq_map_kern(). * ide-tape updated to map sg. * cdrom_do_block_pc() now doesn't have to deal with REQ_TYPE_ATA_PC special case. Simplified. * tp_ops->output/input_data path dropped from ide_pc_intr(). Signed-off-by: Tejun Heo <tj@kernel.org>