summaryrefslogtreecommitdiff
path: root/drivers/ide
AgeCommit message (Collapse)Author
2018-02-26genhd: Rename get_disk() to get_disk_and_module()Jan Kara
Rename get_disk() to get_disk_and_module() to make sure what the function does. It's not a great name but at least it is now clear that put_disk() is not it's counterpart. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-06Merge tag 'pci-v4.16-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - skip AER driver error recovery callbacks for correctable errors reported via ACPI APEI, as we already do for errors reported via the native path (Tyler Baicar) - fix DPC shared interrupt handling (Alex Williamson) - print full DPC interrupt number (Keith Busch) - enable DPC only if AER is available (Keith Busch) - simplify DPC code (Bjorn Helgaas) - calculate ASPM L1 substate parameter instead of hardcoding it (Bjorn Helgaas) - enable Latency Tolerance Reporting for ASPM L1 substates (Bjorn Helgaas) - move ASPM internal interfaces out of public header (Bjorn Helgaas) - allow hot-removal of VGA devices (Mika Westerberg) - speed up unplug and shutdown by assuming Thunderbolt controllers don't support Command Completed events (Lukas Wunner) - add AtomicOps support for GPU and Infiniband drivers (Felix Kuehling, Jay Cornwall) - expose "ari_enabled" in sysfs to help NIC naming (Stuart Hayes) - clean up PCI DMA interface usage (Christoph Hellwig) - remove PCI pool API (replaced with DMA pool) (Romain Perier) - deprecate pci_get_bus_and_slot(), which assumed PCI domain 0 (Sinan Kaya) - move DT PCI code from drivers/of/ to drivers/pci/ (Rob Herring) - add PCI-specific wrappers for dev_info(), etc (Frederick Lawler) - remove warnings on sysfs mmap failure (Bjorn Helgaas) - quiet ROM validation messages (Alex Deucher) - remove redundant memory alloc failure messages (Markus Elfring) - fill in types for compile-time VGA and other I/O port resources (Bjorn Helgaas) - make "pci=pcie_scan_all" work for Root Ports as well as Downstream Ports to help AmigaOne X1000 (Bjorn Helgaas) - add SPDX tags to all PCI files (Bjorn Helgaas) - quirk Marvell 9128 DMA aliases (Alex Williamson) - quirk broken INTx disable on Ceton InfiniTV4 (Bjorn Helgaas) - fix CONFIG_PCI=n build by adding dummy pci_irqd_intx_xlate() (Niklas Cassel) - use DMA API to get MSI address for DesignWare IP (Niklas Cassel) - fix endpoint-mode DMA mask configuration (Kishon Vijay Abraham I) - fix ARTPEC-6 incorrect IS_ERR() usage (Wei Yongjun) - add support for ARTPEC-7 SoC (Niklas Cassel) - add endpoint-mode support for ARTPEC (Niklas Cassel) - add Cadence PCIe host and endpoint controller driver (Cyrille Pitchen) - handle multiple INTx status bits being set in dra7xx (Vignesh R) - translate dra7xx hwirq range to fix INTD handling (Vignesh R) - remove deprecated Exynos PHY initialization code (Jaehoon Chung) - fix MSI erratum workaround for HiSilicon Hip06/Hip07 (Dongdong Liu) - fix NULL pointer dereference in iProc BCMA driver (Ray Jui) - fix Keystone interrupt-controller-node lookup (Johan Hovold) - constify qcom driver structures (Julia Lawall) - rework Tegra config space mapping to increase space available for endpoints (Vidya Sagar) - simplify Tegra driver by using bus->sysdata (Manikanta Maddireddy) - remove PCI_REASSIGN_ALL_BUS usage on Tegra (Manikanta Maddireddy) - add support for Global Fabric Manager Server (GFMS) event to Microsemi Switchtec switch driver (Logan Gunthorpe) - add IDs for Switchtec PSX 24xG3 and PSX 48xG3 (Kelvin Cao) * tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits) PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe endpoint controller PCI: endpoint: Fix EPF device name to support multi-function devices PCI: endpoint: Add the function number as argument to EPC ops PCI: cadence: Add host driver for Cadence PCIe controller dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host controller PCI: Add vendor ID for Cadence PCI: Add generic function to probe PCI host controllers PCI: generic: fix missing call of pci_free_resource_list() PCI: OF: Add generic function to parse and allocate PCI resources PCI: Regroup all PCI related entries into drivers/pci/Makefile PCI/DPC: Reformat DPC register definitions PCI/DPC: Add and use DPC Status register field definitions PCI/DPC: Squash dpc_rp_pio_get_info() into dpc_process_rp_pio_error() PCI/DPC: Remove unnecessary RP PIO register structs PCI/DPC: Push dpc->rp_pio_status assignment into dpc_rp_pio_get_info() PCI/DPC: Squash dpc_rp_pio_print_error() into dpc_rp_pio_get_info() PCI/DPC: Make RP PIO log size check more generic PCI/DPC: Rename local "status" to "dpc_status" PCI/DPC: Squash dpc_rp_pio_print_tlp_header() into dpc_rp_pio_print_error() ...
2018-01-29ide: remove duplicated assignment to 'cursg'Colin Ian King
Pointer cursg is initialized to cmd->cursg and again re-assigned the same value a few lines later, hence the second assignment is redundant and can be removed. Cleans up clang warning: drivers/ide/ide-taskfile.c:229:22: warning: Value stored to 'cursg' during its initialization is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-11sl82c105: deprecate pci_get_bus_and_slot()Sinan Kaya
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as where a PCI device is present. This restricts the device drivers to be reused for other domain numbers. Getting ready to remove pci_get_bus_and_slot() function in favor of pci_get_domain_bus_and_slot(). Replace pci_get_bus_and_slot() with pci_get_domain_bus_and_slot() and extract the domain number from struct pci_dev. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org> Acked-by: David S. Miller <davem@davemloft.net>
2017-11-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ideLinus Torvalds
Pull small IDE cleanup from David Miller. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide: PNP: ide: constify pnp_device_id
2017-11-17Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull more block layer updates from Jens Axboe: "A followup pull request, with some parts that either needed a bit more testing before going in, merge sync, or just later arriving fixes. This contains: - Timer related updates from Kees. These were purposefully delayed since I didn't want to pull in a later v4.14-rc tag to my block tree. - ide-cd prep sense buffer fix from Bart. Also delayed, as not to clash with the late fix we put into 4.14-rc. - Small BFQ updates series from Luca and Paolo. - Single nvmet fix from James, fixing a non-functional case there. - Bio fast clone fix from Michael, which made bcache return the wrong data for some cases. - Legacy IO path regression hang fix from Ming" * 'for-linus' of git://git.kernel.dk/linux-block: bio: ensure __bio_clone_fast copies bi_partno nvmet_fc: fix better length checking block: wake up all tasks blocked in get_request() block, bfq: move debug blkio stats behind CONFIG_DEBUG_BLK_CGROUP block, bfq: update blkio stats outside the scheduler lock block, bfq: add missing invocations of bfqg_stats_update_io_add/remove doc, block, bfq: update max IOPS sustainable with BFQ ide: Make ide_cdrom_prep_fs() initialize the sense buffer pointer md: Convert timers to use timer_setup() block: swim3: Convert timers to use timer_setup() block/aoe: Convert timers to use timer_setup() amifloppy: Convert timers to use timer_setup() block/floppy: Convert callback to pass timer_list
2017-11-15Merge tag 'modules-for-v4.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux Pull module updates from Jessica Yu: "Summary of modules changes for the 4.15 merge window: - treewide module_param_call() cleanup, fix up set/get function prototype mismatches, from Kees Cook - minor code cleanups" * tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: Do not paper over type mismatches in module_param_call() treewide: Fix function prototypes for module_param_call() module: Prepare to convert all module_param_call() prototypes kernel/module: Delete an error message for a failed memory allocation in add_module_usage()
2017-11-14ide: Make ide_cdrom_prep_fs() initialize the sense buffer pointerBart Van Assche
The changes introduced through commit 82ed4db499b8 assume that the sense buffer pointer in struct scsi_request is initialized for all requests - passthrough and filesystem requests. Hence make sure that that pointer is initialized for filesystem requests. Remove the memset() call that clears .cmd because the scsi_req_init() call in ide_initialize_rq() already initializes the .cmd. Fixes: commit 82ed4db499b8 ("block: split scsi_request out of struct request") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-14Merge branch 'for-4.15/block' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull core block layer updates from Jens Axboe: "This is the main pull request for block storage for 4.15-rc1. Nothing out of the ordinary in here, and no API changes or anything like that. Just various new features for drivers, core changes, etc. In particular, this pull request contains: - A patch series from Bart, closing the whole on blk/scsi-mq queue quescing. - A series from Christoph, building towards hidden gendisks (for multipath) and ability to move bio chains around. - NVMe - Support for native multipath for NVMe (Christoph). - Userspace notifications for AENs (Keith). - Command side-effects support (Keith). - SGL support (Chaitanya Kulkarni) - FC fixes and improvements (James Smart) - Lots of fixes and tweaks (Various) - bcache - New maintainer (Michael Lyle) - Writeback control improvements (Michael) - Various fixes (Coly, Elena, Eric, Liang, et al) - lightnvm updates, mostly centered around the pblk interface (Javier, Hans, and Rakesh). - Removal of unused bio/bvec kmap atomic interfaces (me, Christoph) - Writeback series that fix the much discussed hundreds of millions of sync-all units. This goes all the way, as discussed previously (me). - Fix for missing wakeup on writeback timer adjustments (Yafang Shao). - Fix laptop mode on blk-mq (me). - {mq,name} tupple lookup for IO schedulers, allowing us to have alias names. This means you can use 'deadline' on both !mq and on mq (where it's called mq-deadline). (me). - blktrace race fix, oopsing on sg load (me). - blk-mq optimizations (me). - Obscure waitqueue race fix for kyber (Omar). - NBD fixes (Josef). - Disable writeback throttling by default on bfq, like we do on cfq (Luca Miccio). - Series from Ming that enable us to treat flush requests on blk-mq like any other request. This is a really nice cleanup. - Series from Ming that improves merging on blk-mq with schedulers, getting us closer to flipping the switch on scsi-mq again. - BFQ updates (Paolo). - blk-mq atomic flags memory ordering fixes (Peter Z). - Loop cgroup support (Shaohua). - Lots of minor fixes from lots of different folks, both for core and driver code" * 'for-4.15/block' of git://git.kernel.dk/linux-block: (294 commits) nvme: fix visibility of "uuid" ns attribute blk-mq: fixup some comment typos and lengths ide: ide-atapi: fix compile error with defining macro DEBUG blk-mq: improve tag waiting setup for non-shared tags brd: remove unused brd_mutex blk-mq: only run the hardware queue if IO is pending block: avoid null pointer dereference on null disk fs: guard_bio_eod() needs to consider partitions xtensa/simdisk: fix compile error nvme: expose subsys attribute to sysfs nvme: create 'slaves' and 'holders' entries for hidden controllers block: create 'slaves' and 'holders' entries for hidden gendisks nvme: also expose the namespace identification sysfs files for mpath nodes nvme: implement multipath access to nvme subsystems nvme: track shared namespaces nvme: introduce a nvme_ns_ids structure nvme: track subsystems block, nvme: Introduce blk_mq_req_flags_t block, scsi: Make SCSI quiesce and resume work reliably block: Add the QUEUE_FLAG_PREEMPT_ONLY request queue flag ...
2017-11-13Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "Yet another big pile of changes: - More year 2038 work from Arnd slowly reaching the point where we need to think about the syscalls themself. - A new timer function which allows to conditionally (re)arm a timer only when it's either not running or the new expiry time is sooner than the armed expiry time. This allows to use a single timer for multiple timeout requirements w/o caring about the first expiry time at the call site. - A new NMI safe accessor to clock real time for the printk timestamp work. Can be used by tracing, perf as well if required. - A large number of timer setup conversions from Kees which got collected here because either maintainers requested so or they simply got ignored. As Kees pointed out already there are a few trivial merge conflicts and some redundant commits which was unavoidable due to the size of this conversion effort. - Avoid a redundant iteration in the timer wheel softirq processing. - Provide a mechanism to treat RTC implementations depending on their hardware properties, i.e. don't inflict the write at the 0.5 seconds boundary which originates from the PC CMOS RTC to all RTCs. No functional change as drivers need to be updated separately. - The usual small updates to core code clocksource drivers. Nothing really exciting" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits) timers: Add a function to start/reduce a timer pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday() timer: Prepare to change all DEFINE_TIMER() callbacks netfilter: ipvs: Convert timers to use timer_setup() scsi: qla2xxx: Convert timers to use timer_setup() block/aoe: discover_timer: Convert timers to use timer_setup() ide: Convert timers to use timer_setup() drbd: Convert timers to use timer_setup() mailbox: Convert timers to use timer_setup() crypto: Convert timers to use timer_setup() drivers/pcmcia: omap1: Fix error in automated timer conversion ARM: footbridge: Fix typo in timer conversion drivers/sgi-xp: Convert timers to use timer_setup() drivers/pcmcia: Convert timers to use timer_setup() drivers/memstick: Convert timers to use timer_setup() drivers/macintosh: Convert timers to use timer_setup() hwrng/xgene-rng: Convert timers to use timer_setup() auxdisplay: Convert timers to use timer_setup() sparc/led: Convert timers to use timer_setup() mips: ip22/32: Convert timers to use timer_setup() ...
2017-11-10ide: ide-atapi: fix compile error with defining macro DEBUGHongxu Jia
Compile ide-atapi failed with defining macro "DEBUG" ... |drivers/ide/ide-atapi.c:285:52: error: 'struct request' has no member named 'cmd'; did you mean 'csd'? | debug_log("%s: rq->cmd[0]: 0x%x\n", __func__, rq->cmd[0]); ... Since we split the scsi_request out of struct request, it missed do the same thing on debug_log Fixes: 82ed4db499b8 ("block: split scsi_request out of struct request") Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10ide, scsi: Tell the block layer at request allocation time about preempt ↵Bart Van Assche
requests Convert blk_get_request(q, op, __GFP_RECLAIM) into blk_get_request_flags(q, op, BLK_MQ_PREEMPT). This patch does not change any functionality. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Tested-by: Martin Steigerwald <martin@lichtvoll.de> Acked-by: David S. Miller <davem@davemloft.net> [ for IDE ] Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Cc: Ming Lei <ming.lei@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-07drivers/ide-cd: Handle missing driver data during status check gracefullyBorislav Petkov
The 0day bot reports the below failure which happens occasionally, with their randconfig testing (once every ~100 boots). The Code points at the private pointer ->driver_data being NULL, which hints at a race of sorts where the private driver_data descriptor has disappeared by the time we get to run the workqueue. So let's check that pointer before we continue with issuing the command to the drive. This fix is of the brown paper bag nature but considering that IDE is long deprecated, let's do that so that random testing which happens to enable CONFIG_IDE during randconfig builds, doesn't fail because of this. Besides, failing the TEST_UNIT_READY command because the drive private data is gone is something which we could simply do anyway, to denote that there was a problem communicating with the device. BUG: unable to handle kernel NULL pointer dereference at 000001c0 IP: cdrom_check_status *pde = 00000000 Oops: 0000 [#1] SMP CPU: 1 PID: 155 Comm: kworker/1:2 Not tainted 4.14.0-rc8 #127 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Workqueue: events_freezable_power_ disk_events_workfn task: 4fe90980 task.stack: 507ac000 EIP: cdrom_check_status+0x2c/0x90 EFLAGS: 00210246 CPU: 1 EAX: 00000000 EBX: 4fefec00 ECX: 00000000 EDX: 00000000 ESI: 00000003 EDI: ffffffff EBP: 467a9340 ESP: 507aded0 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 CR0: 80050033 CR2: 000001c0 CR3: 06e0f000 CR4: 00000690 Call Trace: ? ide_cdrom_check_events_real ? cdrom_check_events ? disk_check_events ? process_one_work ? process_one_work ? worker_thread ? kthread ? process_one_work ? __kthread_create_on_node ? ret_from_fork Code: 53 83 ec 14 89 c3 89 d1 be 03 00 00 00 65 a1 14 00 00 00 89 44 24 10 31 c0 8b 43 18 c7 44 24 04 00 00 00 00 c7 04 24 00 00 00 00 <8a> 80 c0 01 00 00 c7 44 24 08 00 00 00 00 83 e0 03 c7 44 24 0c EIP: cdrom_check_status+0x2c/0x90 SS:ESP: 0068:507aded0 CR2: 00000000000001c0 ---[ end trace 2410e586dd8f88b2 ]--- Reported-and-tested-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-06ide: Convert timers to use timer_setup()Kees Cook
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-ide@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-02Merge tag 'spdx_identifiers-4.14-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull initial SPDX identifiers from Greg KH: "License cleanup: add SPDX license identifiers to some files Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: License cleanup: add SPDX license identifier to uapi header files with a license License cleanup: add SPDX license identifier to uapi header files with no license License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02block: fix CDROM dependency on BLK_DEVArnd Bergmann
After the cdrom cleanup, I get randconfig warnings for some configurations: warning: (BLK_DEV_IDECD && BLK_DEV_SR) selects CDROM which has unmet direct dependencies (BLK_DEV) This adds an explicit BLK_DEV dependency for both drivers. The other drivers that select 'CDROM' already have this and don't need a change. Fixes: 2a750166a5be ("block: Rework drivers/cdrom/Makefile") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01block: Rework drivers/cdrom/MakefileBart Van Assche
Instead of referring from inside drivers/cdrom/Makefile to all the drivers that use this driver, let these drivers select the cdrom driver. This change makes the cdrom build code follow the approach that is used for most other drivers, namely refer from the higher layers to the lower layer instead of from the lower layer to the higher layers. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-01ide:ide-cd: fix kernel panic resulting from missing scsi_req_initHongxu Jia
Since we split the scsi_request out of struct request, while the standard prep_rq_fn builds 10 byte cmds, it missed to invoke scsi_req_init() to initialize certain fields of a scsi_request structure (.__cmd[], .cmd, .cmd_len and .sense_len but no other members of struct scsi_request). An example panic on virtual machines (qemu/virtualbox) to boot from IDE cdrom: ... [ 8.754381] Call Trace: [ 8.755419] blk_peek_request+0x182/0x2e0 [ 8.755863] blk_fetch_request+0x1c/0x40 [ 8.756148] ? ktime_get+0x40/0xa0 [ 8.756385] do_ide_request+0x37d/0x660 [ 8.756704] ? cfq_group_service_tree_add+0x98/0xc0 [ 8.757011] ? cfq_service_tree_add+0x1e5/0x2c0 [ 8.757313] ? ktime_get+0x40/0xa0 [ 8.757544] __blk_run_queue+0x3d/0x60 [ 8.757837] queue_unplugged+0x2f/0xc0 [ 8.758088] blk_flush_plug_list+0x1f4/0x240 [ 8.758362] blk_finish_plug+0x2c/0x40 ... [ 8.770906] RIP: ide_cdrom_prep_fn+0x63/0x180 RSP: ffff92aec018bae8 [ 8.772329] ---[ end trace 6408481e551a85c9 ]--- ... Fixes: 82ed4db499b8 ("block: split scsi_request out of struct request") Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-31treewide: Fix function prototypes for module_param_call()Kees Cook
Several function prototypes for the set/get functions defined by module_param_call() have a slightly wrong argument types. This fixes those in an effort to clean up the calls when running under type-enforced compiler instrumentation for CFI. This is the result of running the following semantic patch: @match_module_param_call_function@ declarer name module_param_call; identifier _name, _set_func, _get_func; expression _arg, _mode; @@ module_param_call(_name, _set_func, _get_func, _arg, _mode); @fix_set_prototype depends on match_module_param_call_function@ identifier match_module_param_call_function._set_func; identifier _val, _param; type _val_type, _param_type; @@ int _set_func( -_val_type _val +const char * _val , -_param_type _param +const struct kernel_param * _param ) { ... } @fix_get_prototype depends on match_module_param_call_function@ identifier match_module_param_call_function._get_func; identifier _val, _param; type _val_type, _param_type; @@ int _get_func( -_val_type _val +char * _val , -_param_type _param +const struct kernel_param * _param ) { ... } Two additional by-hand changes are included for places where the above Coccinelle script didn't notice them: drivers/platform/x86/thinkpad_acpi.c fs/lockd/svc.c Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2017-10-03ide: fix IRQ assignment for PCI bus order probingLorenzo Pieralisi
We used to assign IRQs for all devices at boot-time, before any drivers claimed devices. The following commits: 30fdfb929e82 ("PCI: Add a call to pci_assign_irq() in pci_device_probe()") 0e4c2eeb758a ("alpha/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks") changed this so we now call pci_assign_irq() from pci_device_probe() when we call a driver's probe method. The ide_scan_pcibus() path (enabled by CONFIG_IDEPCI_PCIBUS_ORDER) bypasses pci_device_probe() so it can guarantee devices are claimed in order of PCI bus address. It calls the driver's probe method directly, so it misses the pci_assign_irq() call (and other PCI initialization functions), which causes failures like this: ide0: disabled, no IRQ ide0: failed to initialize IDE interface ide0: disabling port cmd64x 0000:00:02.0: IDE controller (0x1095:0x0646 rev 0x07) CMD64x_IDE 0000:00:02.0: BAR 0: can't reserve [io 0x8050-0x8057] cmd64x 0000:00:02.0: can't reserve resources CMD64x_IDE: probe of 0000:00:02.0 failed with error -16 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x94/0xd0 sysfs: cannot create duplicate filename '/class/ide_port/ide0' ... Trace: [<fffffc000048c9f4>] sysfs_warn_dup+0x94/0xd0 [<fffffc0000330928>] warn_slowpath_fmt+0x58/0x70 [<fffffc000048c9f4>] sysfs_warn_dup+0x94/0xd0 [<fffffc0000486d40>] kernfs_path_from_node+0x30/0x60 [<fffffc00004874ac>] kernfs_put+0x16c/0x2c0 [<fffffc00004874ac>] kernfs_put+0x16c/0x2c0 [<fffffc000048d010>] sysfs_do_create_link_sd.isra.2+0x100/0x120 [<fffffc00005b9d64>] device_add+0x2a4/0x7c0 [<fffffc00005ba5cc>] device_create_groups_vargs+0x14c/0x170 [<fffffc00005ba518>] device_create_groups_vargs+0x98/0x170 [<fffffc00005ba690>] device_create+0x50/0x70 [<fffffc00005df36c>] ide_host_register+0x48c/0xa00 [<fffffc00005df330>] ide_host_register+0x450/0xa00 [<fffffc00005ba2a0>] device_register+0x20/0x50 [<fffffc00005df330>] ide_host_register+0x450/0xa00 [<fffffc00005df944>] ide_host_add+0x64/0xe0 [<fffffc000079b41c>] kobject_uevent_env+0x16c/0x710 [<fffffc0000310288>] do_one_initcall+0x68/0x260 [<fffffc00007b13bc>] kernel_init+0x1c/0x1a0 ... ---[ end trace 24a70433c3e4d374 ]--- ide0: disabling port Fix the IRQ allocation issue by calling pci_assign_irq() from ide_scan_pcidev() before probing the IDE PCI drivers, so that IRQs for a given PCI device are allocated for the IDE PCI drivers to use them for device configuration. Fixes: 30fdfb929e82 ("PCI: Add a call to pci_assign_irq() in pci_device_probe()") Fixes: 0e4c2eeb758a ("alpha/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks") Link: http://lkml.kernel.org/r/32ec730f-c1b0-5584-cd35-f8a809122b96@roeck-us.net Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: David S. Miller <davem@davemloft.net> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com>
2017-10-03ide: pci: free PCI BARs on initialization failureBartlomiej Zolnierkiewicz
Recent pci_assign_irq() changes uncovered a problem with missing freeing of PCI BARs on PCI IDE host initialization failure: ide0: disabled, no IRQ ide0: failed to initialize IDE interface ide0: disabling port cmd64x 0000:00:02.0: IDE controller (0x1095:0x0646 rev 0x07) CMD64x_IDE 0000:00:02.0: BAR 0: can't reserve [io 0x8050-0x8057] cmd64x 0000:00:02.0: can't reserve resources CMD64x_IDE: probe of 0000:00:02.0 failed with error -16 Fix the problem by adding missing freeing of PCI BARs to ide_setup_pci_controller() and ide_pci_init_two(). Fixes: 30fdfb929e82 ("PCI: Add a call to pci_assign_irq() in pci_device_probe()") Fixes: 0e4c2eeb758a ("alpha/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks") Link: http://lkml.kernel.org/r/32ec730f-c1b0-5584-cd35-f8a809122b96@roeck-us.net Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> [bhelgaas: add Fixes:] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com>
2017-10-03ide: free hwif->portdev on hwif_init() failureBartlomiej Zolnierkiewicz
Recent pci_assign_irq() changes uncovered a problem with missing freeing of ide_port class instance on hwif_init() failure in ide_host_register(): ide0: disabled, no IRQ ide0: failed to initialize IDE interface ide0: disabling port cmd64x 0000:00:02.0: IDE controller (0x1095:0x0646 rev 0x07) CMD64x_IDE 0000:00:02.0: BAR 0: can't reserve [io 0x8050-0x8057] cmd64x 0000:00:02.0: can't reserve resources CMD64x_IDE: probe of 0000:00:02.0 failed with error -16 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x94/0xd0 sysfs: cannot create duplicate filename '/class/ide_port/ide0' ... Trace: [<fffffc00003308a0>] __warn+0x160/0x190 [<fffffc000048c9f4>] sysfs_warn_dup+0x94/0xd0 [<fffffc0000330928>] warn_slowpath_fmt+0x58/0x70 [<fffffc000048c9f4>] sysfs_warn_dup+0x94/0xd0 [<fffffc0000486d40>] kernfs_path_from_node+0x30/0x60 [<fffffc00004874ac>] kernfs_put+0x16c/0x2c0 [<fffffc00004874ac>] kernfs_put+0x16c/0x2c0 [<fffffc000048d010>] sysfs_do_create_link_sd.isra.2+0x100/0x120 [<fffffc00005b9d64>] device_add+0x2a4/0x7c0 [<fffffc00005ba5cc>] device_create_groups_vargs+0x14c/0x170 [<fffffc00005ba518>] device_create_groups_vargs+0x98/0x170 [<fffffc00005ba690>] device_create+0x50/0x70 [<fffffc00005df36c>] ide_host_register+0x48c/0xa00 [<fffffc00005df330>] ide_host_register+0x450/0xa00 [<fffffc00005ba2a0>] device_register+0x20/0x50 [<fffffc00005df330>] ide_host_register+0x450/0xa00 [<fffffc00005df944>] ide_host_add+0x64/0xe0 [<fffffc000079b41c>] kobject_uevent_env+0x16c/0x710 [<fffffc0000310288>] do_one_initcall+0x68/0x260 [<fffffc00007b13bc>] kernel_init+0x1c/0x1a0 [<fffffc00007b13a0>] kernel_init+0x0/0x1a0 [<fffffc0000311868>] ret_from_kernel_thread+0x18/0x20 [<fffffc00007b13a0>] kernel_init+0x0/0x1a0 ---[ end trace 24a70433c3e4d374 ]--- ide0: disabling port Fix the problem by adding missing code to ide_host_register(). Fixes: 30fdfb929e82 ("PCI: Add a call to pci_assign_irq() in pci_device_probe()") Fixes: 0e4c2eeb758a ("alpha/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks") Link: http://lkml.kernel.org/r/32ec730f-c1b0-5584-cd35-f8a809122b96@roeck-us.net Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> [bhelgaas: add Fixes:] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com>
2017-09-07Merge branch 'for-4.14/block' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block layer updates from Jens Axboe: "This is the first pull request for 4.14, containing most of the code changes. It's a quiet series this round, which I think we needed after the churn of the last few series. This contains: - Fix for a registration race in loop, from Anton Volkov. - Overflow complaint fix from Arnd for DAC960. - Series of drbd changes from the usual suspects. - Conversion of the stec/skd driver to blk-mq. From Bart. - A few BFQ improvements/fixes from Paolo. - CFQ improvement from Ritesh, allowing idling for group idle. - A few fixes found by Dan's smatch, courtesy of Dan. - A warning fixup for a race between changing the IO scheduler and device remova. From David Jeffery. - A few nbd fixes from Josef. - Support for cgroup info in blktrace, from Shaohua. - Also from Shaohua, new features in the null_blk driver to allow it to actually hold data, among other things. - Various corner cases and error handling fixes from Weiping Zhang. - Improvements to the IO stats tracking for blk-mq from me. Can drastically improve performance for fast devices and/or big machines. - Series from Christoph removing bi_bdev as being needed for IO submission, in preparation for nvme multipathing code. - Series from Bart, including various cleanups and fixes for switch fall through case complaints" * 'for-4.14/block' of git://git.kernel.dk/linux-block: (162 commits) kernfs: checking for IS_ERR() instead of NULL drbd: remove BIOSET_NEED_RESCUER flag from drbd_{md_,}io_bio_set drbd: Fix allyesconfig build, fix recent commit drbd: switch from kmalloc() to kmalloc_array() drbd: abort drbd_start_resync if there is no connection drbd: move global variables to drbd namespace and make some static drbd: rename "usermode_helper" to "drbd_usermode_helper" drbd: fix race between handshake and admin disconnect/down drbd: fix potential deadlock when trying to detach during handshake drbd: A single dot should be put into a sequence. drbd: fix rmmod cleanup, remove _all_ debugfs entries drbd: Use setup_timer() instead of init_timer() to simplify the code. drbd: fix potential get_ldev/put_ldev refcount imbalance during attach drbd: new disk-option disable-write-same drbd: Fix resource role for newly created resources in events2 drbd: mark symbols static where possible drbd: Send P_NEG_ACK upon write error in protocol != C drbd: add explicit plugging when submitting batches drbd: change list_for_each_safe to while(list_first_entry_or_null) drbd: introduce drbd_recv_header_maybe_unplug ...
2017-09-01ide: pmac: Convert to using %pOF instead of full_nameRob Herring
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linux-ide@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-18ide-floppy: Use blk_rq_is_scsi()Bart Van Assche
This patch does not change any functionality. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Acked-by: David S. Miller <davem@davemloft.net> Reviewed-by: Hannes Reinecke <hare@suse.com> Cc: linux-ide@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-16PNP: ide: constify pnp_device_idArvind Yadav
pnp_device_id are not supposed to change at runtime. All functions working with pnp_device_id provided by <linux/pnp.h> work with const pnp_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-21ide: avoid warning for timings calculationArnd Bergmann
gcc-7 warns about the result of a constant multiplication used as a boolean: drivers/ide/ide-timings.c: In function 'ide_timing_quantize': drivers/ide/ide-timings.c:112:24: error: '*' in boolean context, suggest '&&' instead [-Werror=int-in-bool-context] q->setup = EZ(t->setup * 1000, T); This slightly rearranges the macro to simplify the code and avoid the warning at the same time. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20block: Change argument type of scsi_req_init()Bart Van Assche
Since scsi_req_init() works on a struct scsi_request, change the argument type into struct scsi_request *. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-20block: Make most scsi_req_init() calls implicitBart Van Assche
Instead of explicitly calling scsi_req_init() after blk_get_request(), call that function from inside blk_get_request(). Add an .initialize_rq_fn() callback function to the block drivers that need it. Merge the IDE .init_rq_fn() function into .initialize_rq_fn() because it is too small to keep it as a separate function. Keep the scsi_req_init() call in ide_prep_sense() because it follows a blk_rq_init() call. References: commit 82ed4db499b8 ("block: split scsi_request out of struct request") Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Omar Sandoval <osandov@fb.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-09block: introduce new block status code typeChristoph Hellwig
Currently we use nornal Linux errno values in the block layer, and while we accept any error a few have overloaded magic meanings. This patch instead introduces a new blk_status_t value that holds block layer specific status codes and explicitly explains their meaning. Helpers to convert from and to the previous special meanings are provided for now, but I suspect we want to get rid of them in the long run - those drivers that have a errno input (e.g. networking) usually get errnos that don't know about the special block layer overloads, and similarly returning them to userspace will usually return somethings that strictly speaking isn't correct for file system operations, but that's left as an exercise for later. For now the set of errors is a very limited set that closely corresponds to the previous overloaded errno values, but there is some low hanging fruite to improve it. blk_status_t (ab)uses the sparse __bitwise annotations to allow for sparse typechecking, so that we can easily catch places passing the wrong values. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-01block: Introduce queue flag QUEUE_FLAG_SCSI_PASSTHROUGHBart Van Assche
From the context where a SCSI command is submitted it is not always possible to figure out whether or not the queue the command is submitted to has struct scsi_request as the first member of its private data. Hence introduce the flag QUEUE_FLAG_SCSI_PASSTHROUGH. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: Omar Sandoval <osandov@fb.com> Cc: Don Brace <don.brace@microsemi.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-08ide: don't call memcpy with the same source and destinationMikulas Patocka
The parisc architecture recently reimplemented the memcpy function and their reimplementation crashed when source and destination overlapped. The crash happened in the function ide_complete_cmd where memcpy is called with the same source and destination pointer. According to the C specification, memcpy behavior is undefined if the source and destination range overlaps. This patches fixes the undefined behavior. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-08ide: use setup_timerGeliang Tang
Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26ide-pm: always pass 0 error to ide_complete_rq in ide_do_devsetChristoph Hellwig
The caller only looks at the scsi_request result field anyway. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-26ide-pm: always pass 0 error to __blk_end_request_allChristoph Hellwig
ide_pm_execute_rq exectures a PM request synchronously, and in the failure case where it calls __blk_end_request_all it never checks the error field passed to the end_io callback, so don't bother setting it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-20scsi: introduce a result field in struct scsi_requestChristoph Hellwig
This passes on the scsi_cmnd result field to users of passthrough requests. Currently we abuse req->errors for this purpose, but that field will go away in its current form. Note that the old IDE code abuses the errors field in very creative ways and stores all kinds of different values in it. I didn't dare to touch this magic, so the abuses are brought forward 1:1. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-20block: remove the blk_execute_rq return valueChristoph Hellwig
The function only returns -EIO if rq->errors is non-zero, which is not very useful and lets a large number of callers ignore the return value. Just let the callers figure out their error themselves. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar
<linux/sched/task_stack.h> We are going to split <linux/sched/task_stack.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/task_stack.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar
<linux/sched/nmi.h> We are going to move softlockup APIs out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. <linux/nmi.h> already includes <linux/sched.h>. Include the <linux/nmi.h> header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ideLinus Torvalds
Pull IDE updates from David Miller: "Just one actual change here this time around, adding some init data annotations. The other change was bogus and got reverted" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide: ide: palm_bk3710: add __initdata to palm_bk3710_port_info Revert "ide: Fix interface autodetection in legacy IDE driver (trial #2)" ide: Fix interface autodetection in legacy IDE driver (trial #2)
2017-02-27lib/vsprintf.c: remove %Z supportAlexey Dobriyan
Now that %z is standartised in C99 there is no reason to support %Z. Unlike %L it doesn't even make format strings smaller. Use BUILD_BUG_ON in a couple ATM drivers. In case anyone didn't notice lib/vsprintf.o is about half of SLUB which is in my opinion is quite an achievement. Hopefully this patch inspires someone else to trim vsprintf.c more. Link: http://lkml.kernel.org/r/20170103230126.GA30170@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27ide: palm_bk3710: add __initdata to palm_bk3710_port_infoBhumika Goyal
The object palm_bk3710_port_info of type ide_port_info is never referenced anywhere after initialization by palm_bk3710_probe. It is also passed as a parameter to ide_host_add which is called from the init function but this call doesn't store the object reference anywhere, and it only dereferences the values of the fields. Therefore add __initdata to its declaration. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17Merge branch 'for-4.11/next' into for-4.11/linus-mergeJens Axboe
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-14cdrom: Make device operations read-onlyKees Cook
Since function tables are a common target for attackers, it's best to keep them in read-only memory. As such, this makes the CDROM device ops tables const. This drops additionally n_minors, since it isn't used meaningfully, and sets the only user of cdrom_dummy_generic_packet explicitly so the variables can all be const. Inspired by similar changes in grsecurity/PaX. Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-31block: fold cmd_type into the REQ_OP_ spaceChristoph Hellwig
Instead of keeping two levels of indirection for requests types, fold it all into the operations. The little caveat here is that previously cmd_type only applied to struct request, while the request and bio op fields were set to plain REQ_OP_READ/WRITE even for passthrough operations. Instead this patch adds new REQ_OP_* for SCSI passthrough and driver private requests, althought it has to add two for each so that we can communicate the data in/out nature of the request. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-31ide: don't abuse cmd_typeChristoph Hellwig
Currently the legacy ide driver defines several request types of it's own, which is in the way of removing that field entirely. Instead add a type field to struct ide_request and use that to distinguish the different types of IDE-internal requests. It's a bit of a mess, but so is the surrounding code.. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-31block: make scsi_request and scsi ioctl support optionalChristoph Hellwig
We only need this code to support scsi, ide, cciss and virtio. And at least for virtio it's a deprecated feature to start with. This should shrink the kernel size for embedded device that only use, say eMMC a bit. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-27block: split scsi_request out of struct requestChristoph Hellwig
And require all drivers that want to support BLOCK_PC to allocate it as the first thing of their private data. To support this the legacy IDE and BSG code is switched to set cmd_size on their queues to let the block layer allocate the additional space. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-09Revert "ide: Fix interface autodetection in legacy IDE driver (trial #2)"David S. Miller
This reverts commit b2ae75052a8c1611b2030fa49ba1c6b6439fa04f. The inverse logic is intentional, and this change even breaks booting on some systems. Signed-off-by: David S. Miller <davem@davemloft.net>