summaryrefslogtreecommitdiff
path: root/drivers/idle
AgeCommit message (Collapse)Author
2016-04-09intel_idle: add BXT supportLen Brown
Broxton has all the HSW C-states, except C3. BXT C-state timing is slightly different. Here we trust the IRTL MSRs as authority on maximum C-state latency, and override the driver's tables with the values found in the associated IRTL MSRs. Further we set the target_residency to 1x maximum latency, trusting the hardware demotion logic. Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07intel_idle: Add KBL supportLen Brown
KBL is similar to SKL Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07intel_idle: Add SKX supportLen Brown
SKX is similar to BDX Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07intel_idle: Clean up all registered devices on exit.Richard Cochran
This driver registers cpuidle devices when a CPU comes online, but it leaves the registrations in place when a CPU goes offline. The module exit code only unregisters the currently online CPUs, leaving the devices for offline CPUs dangling. This patch changes the driver to clean up all registrations on exit, even those from CPUs that are offline. Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07intel_idle: Propagate hot plug errors.Richard Cochran
If a cpuidle registration error occurs during the hot plug notifier callback, we should really inform the hot plug machinery instead of just ignoring the error. This patch changes the callback to properly return on error. Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07intel_idle: Don't overreact to a cpuidle registration failure.Richard Cochran
The helper function, intel_idle_cpu_init, registers one new device with the cpuidle layer. If the registration should fail, that function immediately calls intel_idle_cpuidle_devices_uninit() to unregister every last CPU's device. However, it makes no sense to do so, when called from the hot plug notifier callback. This patch moves the call to intel_idle_cpuidle_devices_uninit() outside of the helper function to the one call site that actually needs to perform the de-registrations. Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07intel_idle: Setup the timer broadcast only on successful driver load.Richard Cochran
This driver sets the broadcast tick quite early on during probe and does not clean up again in cast of failure. This patch moves the setup call after the registration, placing the on_each_cpu() calls within the global CPU lock region. Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07intel_idle: Avoid a double free of the per-CPU data.Richard Cochran
The helper function, intel_idle_cpuidle_devices_uninit, frees the globally allocated per-CPU data. However, this function is invoked from the hot plug notifier callback at a time when freeing that data is not safe. If the call to cpuidle_register_driver() should fail (say, due to lack of memory), then the driver will free its per-CPU region. On the *next* CPU_ONLINE event, the driver will happily use the region again and even free it again if the failure repeats. This patch fixes the issue by moving the call to free_percpu() outside of the helper function at the two call sites that actually need to free the per-CPU data. Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07intel_idle: Fix dangling registration on error path.Richard Cochran
In the module_init() method, if the per-CPU allocation fails, then the active cpuidle registration is not cleaned up. This patch fixes the issue by attempting the allocation before registration, and then cleaning it up again on registration failure. Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07intel_idle: Fix deallocation order on the driver exit path.Richard Cochran
In the module_exit() method, this driver first frees its per-CPU pointer, then unregisters a callback making use of the pointer. Furthermore, the function, intel_idle_cpuidle_devices_uninit, is racy against CPU hot plugging as it calls for_each_online_cpu(). This patch corrects the issues by unregistering first on the exit path while holding the hot plug lock. Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07intel_idle: Remove redundant initialization calls.Richard Cochran
The function, intel_idle_cpuidle_driver_init, makes calls on each CPU to auto_demotion_disable() and c1e_promotion_disable(). These calls are redundant, as intel_idle_cpu_init() does the same calls just a bit later on. They are also premature, as the driver registration may yet fail. This patch removes the redundant code. Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07intel_idle: Fix a helper function's return value.Richard Cochran
The function, intel_idle_cpuidle_driver_init, delivers no error codes at all. This patch changes the function to return 'void' instead of returning zero. Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-07intel_idle: remove useless return from void function.Richard Cochran
Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-03-23intel_idle: Support for Intel Xeon Phi Processor x200 Product FamilyDasaratharaman Chandramouli
Enables "Intel(R) Xeon Phi(TM) Processor x200 Product Family" support, formerly code-named KNL. It is based on modified Intel Atom Silvermont microarchitecture. Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> [micah.barany@intel.com: adjusted values of residency and latency] Signed-off-by: Micah Barany <micah.barany@intel.com> [hubert.chrzaniuk@intel.com: removed deprecated CPUIDLE_FLAG_TIME_VALID flag] Signed-off-by: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com> Signed-off-by: Pawel Karczewski <pawel.karczewski@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2016-03-23intel_idle: prevent SKL-H boot failure when C8+C9+C10 enabledLen Brown
Some SKL-H configurations require "intel_idle.max_cstate=7" to boot. While that is an effective workaround, it disables C10. This patch detects the problematic configuration, and disables C8 and C9, keeping C10 enabled. Note that enabling SGX in BIOS SETUP can also prevent this issue, if the system BIOS provides that option. https://bugzilla.kernel.org/show_bug.cgi?id=109081 "Freezes with Intel i7 6700HQ (Skylake), unless intel_idle.max_cstate=7" Signed-off-by: Len Brown <len.brown@intel.com> Cc: stable@vger.kernel.org
2015-09-10intel_idle: Skylake Client Support - updatedLen Brown
Addition of PC9 state, and minor tweaks to existing PC6 and PC8 states. Signed-off-by: Len Brown <len.brown@intel.com>
2015-08-15intel_idle: Skylake Client SupportLen Brown
Skylake Client CPU idle Power states (C-states) are similar to the previous generation, Broadwell. However, Skylake does get its own table with updated worst-case latency and average energy-break-even residency values. Signed-off-by: Len Brown <len.brown@intel.com>
2015-07-26intel_idle: allow idle states to be freeze-mode specificLen Brown
intel_idle uses a NULL "enter" field in a cpuidle state to recognize the invalid entry terminating a variable-length array. Linux-4.0 added support for the system-wide "freeze" state in cpuidle drivers via the new "enter_freeze" field. The natural way to expose a deep idle state for freeze, but not for run-time idle is to supply "enter_freeze" without "enter"; so we update the driver to accept such states. Signed-off-by: Len Brown <len.brown@intel.com>
2015-04-14Merge tag 'pm+acpi-4.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael Wysocki: "These are mostly fixes and cleanups all over, although there are a few items that sort of fall into the new feature category. First off, we have new callbacks for PM domains that should help us to handle some issues related to device initialization in a better way. There also is some consolidation in the unified device properties API area allowing us to use that inferface for accessing data coming from platform initialization code in addition to firmware-provided data. We have some new device/CPU IDs in a few drivers, support for new chips and a new cpufreq driver too. Specifics: - Generic PM domains support update including new PM domain callbacks to handle device initialization better (Russell King, Rafael J Wysocki, Kevin Hilman) - Unified device properties API update including a new mechanism for accessing data provided by platform initialization code (Rafael J Wysocki, Adrian Hunter) - ARM cpuidle update including ARM32/ARM64 handling consolidation (Daniel Lezcano) - intel_idle update including support for the Silvermont Core in the Baytrail SOC and for the Airmont Core in the Cherrytrail and Braswell SOCs (Len Brown, Mathias Krause) - New cpufreq driver for Hisilicon ACPU (Leo Yan) - intel_pstate update including support for the Knights Landing chip (Dasaratharaman Chandramouli, Kristen Carlson Accardi) - QorIQ cpufreq driver update (Tang Yuantian, Arnd Bergmann) - powernv cpufreq driver update (Shilpasri G Bhat) - devfreq update including Tegra support changes (Tomeu Vizoso, MyungJoo Ham, Chanwoo Choi) - powercap RAPL (Running-Average Power Limit) driver update including support for Intel Broadwell server chips (Jacob Pan, Mathias Krause) - ACPI device enumeration update related to the handling of the special PRP0001 device ID allowing DT-style 'compatible' property to be used for ACPI device identification (Rafael J Wysocki) - ACPI EC driver update including limited _DEP support (Lan Tianyu, Lv Zheng) - ACPI backlight driver update including a new mechanism to allow native backlight handling to be forced on non-Windows 8 systems and a new quirk for Lenovo Ideapad Z570 (Aaron Lu, Hans de Goede) - New Windows Vista compatibility quirk for Sony VGN-SR19XN (Chen Yu) - Assorted ACPI fixes and cleanups (Aaron Lu, Martin Kepplinger, Masanari Iida, Mika Westerberg, Nan Li, Rafael J Wysocki) - Fixes related to suspend-to-idle for the iTCO watchdog driver and the ACPI core system suspend/resume code (Rafael J Wysocki, Chen Yu) - PM tracing support for the suspend phase of system suspend/resume transitions (Zhonghui Fu) - Configurable delay for the system suspend/resume testing facility (Brian Norris) - PNP subsystem cleanups (Peter Huewe, Rafael J Wysocki)" * tag 'pm+acpi-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits) ACPI / scan: Fix NULL pointer dereference in acpi_companion_match() ACPI / scan: Rework modalias creation when "compatible" is present intel_idle: mark cpu id array as __initconst powercap / RAPL: mark rapl_ids array as __initconst powercap / RAPL: add ID for Broadwell server intel_pstate: Knights Landing support intel_pstate: remove MSR test cpufreq: fix qoriq uniprocessor build ACPI / scan: Take the PRP0001 position in the list of IDs into account ACPI / scan: Simplify acpi_match_device() ACPI / scan: Generalize of_compatible matching device property: Introduce firmware node type for platform data device property: Make it possible to use secondary firmware nodes PM / watchdog: iTCO: stop watchdog during system suspend cpufreq: hisilicon: add acpu driver ACPI / EC: Call acpi_walk_dep_device_list() after installing EC opregion handler cpufreq: powernv: Report cpu frequency throttling intel_idle: Add support for the Airmont Core in the Cherrytrail and Braswell SOCs intel_idle: Update support for Silvermont Core in Baytrail SOC PM / devfreq: tegra: Register governor on module init ...
2015-04-11Merge branch 'cpuidle' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux into pm-cpuidle Pull intel_idle material for v4.1 from Len Brown. * 'cpuidle' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: intel_idle: Add support for the Airmont Core in the Cherrytrail and Braswell SOCs intel_idle: Update support for Silvermont Core in Baytrail SOC
2015-04-11intel_idle: mark cpu id array as __initconstMathias Krause
The CPU ids are only tested in intel_idle_probe() which is itself an __init function. For the MODULE_DEVICE_TABLE() file2alias doesn't care about the section, just about the symbol name. So it's safe to mark the cpu id array as __initconst so its memory can be released after initialization is done. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-04-03intel_idle: Use explicit broadcast oneshot control functionThomas Gleixner
Replace the clockevents_notify() call with an explicit function call. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20714596.QMfNNPbuyU@vostro.rjw.lan Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-03intel_idle: Use explicit broadcast control functionThomas Gleixner
Replace the clockevents_notify() call with an explicit function call. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/3878165.rXNXrtVNuy@vostro.rjw.lan Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31intel_idle: Add support for the Airmont Core in the Cherrytrail and Braswell ↵Len Brown
SOCs Support C-states for the Airmont core in the Cherrytrail and Braswell SOCs. The states are similar to those of Silvermont in Baytrail, except both flavors of C6 states are faster. Signed-off-by: Len Brown <len.brown@intel.com> Cc: Kumar P Mahesh <mahesh.kumar.p@intel.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
2015-03-31intel_idle: Update support for Silvermont Core in Baytrail SOCLen Brown
On some Silvermont-Core/Baytrail-SOC systems, C1E latency is higher than original specifications. Although C1E is still enumerated in CPUID.MWAIT.EDX, we delete the state from intel_idle to avoid latency impact. Under some conditions, the latency of the C6N-BYT and C6S-BYT states may exceed the specified values of 40 and 140 usec, respectively. Increase those values to 300 and 500 usec; to assure that the hardware does not violate constraints that may be set by the Linux PM_QOS sub-system. Also increase the C7-BYT target residency to 4.0 ms from 1.5 ms. Signed-off-by: Len Brown <len.brown@intel.com> Cc: Kumar P Mahesh <mahesh.kumar.p@intel.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: <stable@vger.kernel.org>
2015-02-15intel_idle: Add ->enter_freeze callbacksRafael J. Wysocki
Add an ->enter_freeze callback routine, intel_idle_freeze(), to the intel_idle driver and point the ->enter_freeze callback pointers of all of the driver's state objects to it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2015-02-10intel_idle: support additional Broadwell modelLen Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2014-11-12cpuidle: Invert CPUIDLE_FLAG_TIME_VALID logicDaniel Lezcano
The only place where the time is invalid is when the ACPI_CSTATE_FFH entry method is not set. Otherwise for all the drivers, the time can be correctly measured. Instead of duplicating the CPUIDLE_FLAG_TIME_VALID flag in all the drivers for all the states, just invert the logic by replacing it by the flag CPUIDLE_FLAG_TIME_INVALID, hence we can set this flag only for the acpi idle driver, remove the former flag from all the drivers and invert the logic with this flag in the different governor. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-08-15intel_idle: Broadwell supportLen Brown
Broadwell (BDW) is similar to Haswell (HSW), the preceding processor generation. Currently, the only difference in their C-state tables is that PC3 max exit latency is 33usec on HSW and 40usec on BDW. Signed-off-by: Len Brown <len.brown@intel.com>
2014-08-15intel_idle: Disable Baytrail Core and Module C6 auto-demotionLen Brown
Power efficiency improves on Baytrail (Intel Atom Processor E3000) when Linux disables C6 auto-demotion. Based on work by Srinidhi Kasagar <srinidhi.kasagar@intel.com>. Signed-off-by: Len Brown <len.brown@intel.com> Cc: x86@kernel.org
2014-04-21intel_idle: fix IVT idle state table settingChristoph Jaeger
Ivy Town idle state table will not be set as intended. Fix it. Picked up by Coverity - CID 1201420/1201421. Fixes: 0138d8f075 ("intel_idle: fine-tune IVT residency targets") Signed-off-by: Christoph Jaeger <christophjaeger@linux.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-08Merge branch 'pm-cpuidle'Rafael J. Wysocki
* pm-cpuidle: cpuidle: sysfs: Export target residency information intel_idle: fine-tune IVT residency targets tools/power turbostat: Run on Broadwell tools/power turbostat: simplify output, add Avg_MHz intel_idle: Add CPU model 54 (Atom N2000 series) intel_idle: support Bay Trail intel_idle: allow sparse sub-state numbering, for Bay Trail ACPI idle: permit sparse C-state sub-state numbers
2014-04-04intel_idle: fine-tune IVT residency targetsLen Brown
Ivy Town processors have slightly different properties than Ivy Bridge processors, particuarly as socket count grows. Here we add dedicated tables covering 1-2 socket, 3-4 socket, and > 4 socket IVT configurations. This reduces the frequency of deep transitions on those systems, which can impact throughput. Signed-off-by: Len Brown <len.brown@intel.com>
2014-03-20intel-idle: Fix CPU hotplug callback registrationSrivatsa S. Bhat
Subsystems that want to register CPU hotplug callbacks, as well as perform initialization for the CPUs that are already online, often do it as shown below: get_online_cpus(); for_each_online_cpu(cpu) init_cpu(cpu); register_cpu_notifier(&foobar_cpu_notifier); put_online_cpus(); This is wrong, since it is prone to ABBA deadlocks involving the cpu_add_remove_lock and the cpu_hotplug.lock (when running concurrently with CPU hotplug operations). Instead, the correct and race-free way of performing the callback registration is: cpu_notifier_register_begin(); for_each_online_cpu(cpu) init_cpu(cpu); /* Note the use of the double underscored version of the API */ __register_cpu_notifier(&foobar_cpu_notifier); cpu_notifier_register_done(); Fix the intel-idle code by using this latter form of callback registration. Cc: Len Brown <lenb@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-27intel_idle: Add CPU model 54 (Atom N2000 series)Jan Kiszka
Add CPU ID for Atom N2600/N2800 processors. Datasheets indicate support for this, detailed information about potential quirks or limitations are missing, though. So we just reuse the definition for the previous ATOM series. Tests on N2800 systems showed that this addition is fine an can reduce power consumption by about 0.25 W (personally confirmed on Intel DN2800MT). Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Len Brown <len.brown@intel.com>
2014-02-19intel_idle: support Bay TrailLen Brown
Bay Trail (BYT) is a family of Silvermont-core Atom Processor SOCs, including the Intel Atom Processor Z36xxx and Z37xxx Series. Although it shares the Silvermont core with Avoton, BYT is optimized for mobile, and thus it supports different power saving CPU idle states. Note that not all versions of Bay Trail HW support all of the states listed in the driver. Signed-off-by: Len Brown <len.brown@intel.com> Tested-by: Aubrey Li <aubrey.li@linux.intel.com>
2014-02-19intel_idle: allow sparse sub-state numbering, for Bay TrailLen Brown
Like acpi_idle, intel_idle compared sub-state numbers to the number of supported sub-states -- discarding sub-states numbers that were numbered >= the number of states. But some Bay Trail SOCs use sparse sub-state numbers, so we can't make such a comparison if we are going to access those states. So now we simply check that _some_ sub-states are supported for the given state, and assume that the sub-state number in our driver is valid. In practice, the driver is correct, and even if it were not, the hardware clips invalid sub-state requests to valid ones. No entries in the driver require this change, but Bay Trail will need it. Signed-off-by: Len Brown <len.brown@intel.com>
2014-01-24Merge tag 'pm+acpi-3.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "As far as the number of commits goes, the top spot belongs to ACPI this time with cpufreq in the second position and a handful of PM core, PNP and cpuidle updates. They are fixes and cleanups mostly, as usual, with a couple of new features in the mix. The most visible change is probably that we will create struct acpi_device objects (visible in sysfs) for all devices represented in the ACPI tables regardless of their status and there will be a new sysfs attribute under those objects allowing user space to check that status via _STA. Consequently, ACPI device eject or generally hot-removal will not delete those objects, unless the table containing the corresponding namespace nodes is unloaded, which is extremely rare. Also ACPI container hotplug will be handled quite a bit differently and cpufreq will support CPU boost ("turbo") generically and not only in the acpi-cpufreq driver. Specifics: - ACPI core changes to make it create a struct acpi_device object for every device represented in the ACPI tables during all namespace scans regardless of the current status of that device. In accordance with this, ACPI hotplug operations will not delete those objects, unless the underlying ACPI tables go away. - On top of the above, new sysfs attribute for ACPI device objects allowing user space to check device status by triggering the execution of _STA for its ACPI object. From Srinivas Pandruvada. - ACPI core hotplug changes reducing code duplication, integrating the PCI root hotplug with the core and reworking container hotplug. - ACPI core simplifications making it use ACPI_COMPANION() in the code "glueing" ACPI device objects to "physical" devices. - ACPICA update to upstream version 20131218. This adds support for the DBG2 and PCCT tables to ACPICA, fixes some bugs and improves debug facilities. From Bob Moore, Lv Zheng and Betty Dall. - Init code change to carry out the early ACPI initialization earlier. That should allow us to use ACPI during the timekeeping initialization and possibly to simplify the EFI initialization too. From Chun-Yi Lee. - Clenups of the inclusions of ACPI headers in many places all over from Lv Zheng and Rashika Kheria (work in progress). - New helper for ACPI _DSM execution and rework of the code in drivers that uses _DSM to execute it via the new helper. From Jiang Liu. - New Win8 OSI blacklist entries from Takashi Iwai. - Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun Guo, Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava, Rashika Kheria, Tang Chen, Zhang Rui. - intel_pstate driver updates, including proper Baytrail support, from Dirk Brandewie and intel_pstate documentation from Ramkumar Ramachandra. - Generic CPU boost ("turbo") support for cpufreq from Lukasz Majewski. - powernow-k6 cpufreq driver fixes from Mikulas Patocka. - cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark Brown. - Assorted cpufreq drivers fixes and cleanups from Anson Huang, John Tobias, Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh Kumar. - cpuidle cleanups from Bartlomiej Zolnierkiewicz. - Support for hibernation APM events from Bin Shi. - Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC disabled during thaw transitions from Bjørn Mork. - PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf Hansson. - PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente Kurusa, Rashika Kheria. - New tool for profiling system suspend from Todd E Brandt and a cpupower tool cleanup from One Thousand Gnomes" * tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (153 commits) thermal: exynos: boost: Automatic enable/disable of BOOST feature (at Exynos4412) cpufreq: exynos4x12: Change L0 driver data to CPUFREQ_BOOST_FREQ Documentation: cpufreq / boost: Update BOOST documentation cpufreq: exynos: Extend Exynos cpufreq driver to support boost cpufreq / boost: Kconfig: Support for software-managed BOOST acpi-cpufreq: Adjust the code to use the common boost attribute cpufreq: Add boost frequency support in core intel_pstate: Add trace point to report internal state. cpufreq: introduce cpufreq_generic_get() routine ARM: SA1100: Create dummy clk_get_rate() to avoid build failures cpufreq: stats: create sysfs entries when cpufreq_stats is a module cpufreq: stats: free table and remove sysfs entry in a single routine cpufreq: stats: remove hotplug notifiers cpufreq: stats: handle cpufreq_unregister_driver() and suspend/resume properly cpufreq: speedstep: remove unused speedstep_get_state platform: introduce OF style 'modalias' support for platform bus PM / tools: new tool for suspend/resume performance optimization ACPI: fix module autoloading for ACPI enumerated devices ACPI: add module autoloading support for ACPI enumerated devices ACPI: fix create_modalias() return value handling ...
2014-01-13Merge branch 'x86/idle' into sched/coreIngo Molnar
Merge these x86 specific bits - we are going to add generic bits as well. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-11intel_idle: remove superfluous dev->state_count initializationBartlomiej Zolnierkiewicz
intel_idle driver sets dev->state_count to drv->state_count so the default dev->state_count initialization in cpuidle_enable_device() (called from cpuidle_register_device()) can be used instead. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Len Brown <lenb@kernel.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-11intel_idle: do C1E promotion disable quirk for hotplugged CPUsBartlomiej Zolnierkiewicz
If the system is booted with some CPUs offline C1E promotion disable quirk won't be applied because on_each_cpu() in intel_idle_cpuidle_driver_init() operates only on online CPUs. Fix it by adding the C1E promotion disable handling to intel_idle_cpu_init() (which is also called during CPU_ONLINE operation). Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Len Brown <lenb@kernel.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-10intel_idle: close avn_cstates array with correct markerJiang Liu
Close avn_cstates array with correct marker to avoid overflow in function intel_idle_cpu_init(). [rjw: The problem was introduced when commit 22e580d07f65 was merged on top of eba682a5aeb6 (intel_idle: shrink states tables).] Fixes: 22e580d07f65 (intel_idle: Fixed C6 state on Avoton/Rangeley processors) Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-09Revert "intel_idle: mark states tables with __initdata tag"Jiang Liu
This reverts commit 9d046ccb98085f1d437585f84748c783a04ba240. Commit 9d046ccb98085 marks all state tables with __initdata, but the state table may be accessed when doing CPU online, which then causing system crash as below: [ 204.188841] BUG: unable to handle kernel paging request at ffffffff8227cce8 [ 204.196844] IP: [<ffffffff814aa1c0>] intel_idle_cpu_init+0x40/0x130 [ 204.203996] PGD 1e11067 PUD 1e12063 PMD 455859063 PTE 800000000227c062 [ 204.211638] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC [ 204.216975] Modules linked in: x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd gpio_ich microcode joydev sb_edac edac_core ipmi_si lpc_ich ipmi_msghandler lp tpm_tis parport wmi mac_hid acpi_pad hid_generic ixgbe isci usbhid dca hid libsas ptp ahci libahci scsi_transport_sas megaraid_sas pps_core mdio [ 204.262815] CPU: 11 PID: 1489 Comm: bash Not tainted 3.13.0-rc7+ #48 [ 204.269993] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRIVTIN1.86B.0047.L09.1312061514 12/06/2013 [ 204.281646] task: ffff8804303a24a0 ti: ffff880440fac000 task.ti: ffff880440fac000 [ 204.290311] RIP: 0010:[<ffffffff814aa1c0>] [<ffffffff814aa1c0>] intel_idle_cpu_init+0x40/0x130 [ 204.300184] RSP: 0018:ffff880440fadd28 EFLAGS: 00010286 [ 204.306192] RAX: ffffffff8227cca0 RBX: ffffe8fff1a03400 RCX: 0000000000000007 [ 204.314244] RDX: ffff88045f400000 RSI: 0000000000000009 RDI: 0000000000001120 [ 204.322296] RBP: ffff880440fadd38 R08: 0000000000000000 R09: 0000000000000001 [ 204.330411] R10: 0000000000000001 R11: 0000000000000000 R12: 000000000000001e [ 204.338482] R13: 00000000ffffffdb R14: 0000000000000001 R15: 0000000000000000 [ 204.346743] FS: 00007f64f7b0c740(0000) GS:ffff88045ce00000(0000) knlGS:0000000000000000 [ 204.355919] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 204.362449] CR2: ffffffff8227cce8 CR3: 0000000444ab0000 CR4: 00000000001407e0 [ 204.370520] Stack: [ 204.372853] 000000000000001e ffffffff81f10240 ffff880440fadd50 ffffffff814aa307 [ 204.381519] ffffffff81ea80e0 ffff880440fadda0 ffffffff8185a230 0000000000000000 [ 204.390196] 000000000000001e 0000000000000002 0000000000000002 0000000000000000 [ 204.398856] Call Trace: [ 204.401683] [<ffffffff814aa307>] cpu_hotplug_notify+0x57/0x70 [ 204.408638] [<ffffffff8185a230>] notifier_call_chain+0x100/0x150 [ 204.415553] [<ffffffff810a7dae>] __raw_notifier_call_chain+0xe/0x10 [ 204.422772] [<ffffffff81072163>] cpu_notify+0x23/0x50 [ 204.428616] [<ffffffff810723b2>] _cpu_up+0x132/0x1a0 [ 204.434361] [<ffffffff8107249d>] cpu_up+0x7d/0xa0 [ 204.439819] [<ffffffff81836c9c>] cpu_subsys_online+0x3c/0x90 [ 204.446345] [<ffffffff81554625>] device_online+0x45/0xa0 [ 204.452471] [<ffffffff815546ce>] online_store+0x4e/0x80 [ 204.458511] [<ffffffff815519a8>] dev_attr_store+0x18/0x30 [ 204.464744] [<ffffffff812a68f1>] sysfs_write_file+0x151/0x1c0 [ 204.471681] [<ffffffff81217ef1>] vfs_write+0xe1/0x160 [ 204.477524] [<ffffffff8121889c>] SyS_write+0x4c/0x90 [ 204.483270] [<ffffffff8185f2ed>] system_call_fastpath+0x1a/0x1f [ 204.490081] Code: 41 54 41 89 fc 8b 3d 48 25 85 01 53 48 8b 1d 30 25 85 01 48 03 1c c5 40 90 fb 81 48 8b 05 19 25 85 01 c7 43 0c 01 00 00 00 66 90 <48> 83 78 48 00 74 4f 41 83 c0 01 41 39 f0 7e 10 48 c7 c7 38 79 [ 204.515723] RIP [<ffffffff814aa1c0>] intel_idle_cpu_init+0x40/0x130 [ 204.522996] RSP <ffff880440fadd28> [ 204.526976] CR2: ffffffff8227cce8 [ 204.530766] ---[ end trace 336f56cc3d1cfc8c ]--- Fixes: 9d046ccb98085 (intel_idle: mark states tables with __initdata tag) Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-19x86, acpi, idle: Restructure the mwait idle routinesPeter Zijlstra
People seem to delight in writing wrong and broken mwait idle routines; collapse the lot. This leaves mwait_play_dead() the sole remaining user of __mwait() and new __mwait() users are probably doing it wrong. Also remove __sti_mwait() as its unused. Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Jacob Jun Pan <jacob.jun.pan@linux.intel.com> Cc: Mike Galbraith <bitbucket@online.de> Cc: Len Brown <lenb@kernel.org> Cc: Rui Zhang <rui.zhang@intel.com> Acked-by: Rafael Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20131212141654.616820819@infradead.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-12-19x86 idle: Repair large-server 50-watt idle-power regressionLen Brown
Linux 3.10 changed the timing of how thread_info->flags is touched: x86: Use generic idle loop (7d1a941731fabf27e5fb6edbebb79fe856edb4e5) This caused Intel NHM-EX and WSM-EX servers to experience a large number of immediate MONITOR/MWAIT break wakeups, which caused cpuidle to demote from deep C-states to shallow C-states, which caused these platforms to experience a significant increase in idle power. Note that this issue was already present before the commit above, however, it wasn't seen often enough to be noticed in power measurements. Here we extend an errata workaround from the Core2 EX "Dunnington" to extend to NHM-EX and WSM-EX, to prevent these immediate returns from MWAIT, reducing idle power on these platforms. While only acpi_idle ran on Dunnington, intel_idle may also run on these two newer systems. As of today, there are no other models that are known to need this tweak. Link: http://lkml.kernel.org/r/CAJvTdK=%2BaNN66mYpCGgbHGCHhYQAKx-vB0kJSWjVpsNb_hOAtQ@mail.gmail.com Signed-off-by: Len Brown <len.brown@intel.com> Link: http://lkml.kernel.org/r/baff264285f6e585df757d58b17788feabc68918.1387403066.git.len.brown@intel.com Cc: <stable@vger.kernel.org> # 3.12.x, 3.11.x, 3.10.x Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-11-28intel_idle: Fixed C6 state on Avoton/Rangeley processorsBockholdt Arne
Corrected the MWAIT flag for C-State C6 on Intel Avoton/Rangeley processors. Signed-off-by: Arne Bockholdt <linux-kernel@bockholdt.com> Acked-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-11-19Merge branch 'pm-cpuidle'Rafael J. Wysocki
* pm-cpuidle: intel_idle: Support Intel Atom Processor C2000 Product Family
2013-11-14Merge tag 'pm+acpi-3.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael J Wysocki: - New power capping framework and the the Intel Running Average Power Limit (RAPL) driver using it from Srinivas Pandruvada and Jacob Pan. - Addition of the in-kernel switching feature to the arm_big_little cpufreq driver from Viresh Kumar and Nicolas Pitre. - cpufreq support for iMac G5 from Aaro Koskinen. - Baytrail processors support for intel_pstate from Dirk Brandewie. - cpufreq support for Midway/ECX-2000 from Mark Langsdorf. - ARM vexpress/TC2 cpufreq support from Sudeep KarkadaNagesha. - ACPI power management support for the I2C and SPI bus types from Mika Westerberg and Lv Zheng. - cpufreq core fixes and cleanups from Viresh Kumar, Srivatsa S Bhat, Stratos Karafotis, Xiaoguang Chen, Lan Tianyu. - cpufreq drivers updates (mostly fixes and cleanups) from Viresh Kumar, Aaro Koskinen, Jungseok Lee, Sudeep KarkadaNagesha, Lukasz Majewski, Manish Badarkhe, Hans-Christian Egtvedt, Evgeny Kapaev. - intel_pstate updates from Dirk Brandewie and Adrian Huang. - ACPICA update to version 20130927 includig fixes and cleanups and some reduction of divergences between the ACPICA code in the kernel and ACPICA upstream in order to improve the automatic ACPICA patch generation process. From Bob Moore, Lv Zheng, Tomasz Nowicki, Naresh Bhat, Bjorn Helgaas, David E Box. - ACPI IPMI driver fixes and cleanups from Lv Zheng. - ACPI hotplug fixes and cleanups from Bjorn Helgaas, Toshi Kani, Zhang Yanfei, Rafael J Wysocki. - Conversion of the ACPI AC driver to the platform bus type and multiple driver fixes and cleanups related to ACPI from Zhang Rui. - ACPI processor driver fixes and cleanups from Hanjun Guo, Jiang Liu, Bartlomiej Zolnierkiewicz, Mathieu Rhéaume, Rafael J Wysocki. - Fixes and cleanups and new blacklist entries related to the ACPI video support from Aaron Lu, Felipe Contreras, Lennart Poettering, Kirill Tkhai. - cpuidle core cleanups from Viresh Kumar and Lorenzo Pieralisi. - cpuidle drivers fixes and cleanups from Daniel Lezcano, Jingoo Han, Bartlomiej Zolnierkiewicz, Prarit Bhargava. - devfreq updates from Sachin Kamat, Dan Carpenter, Manish Badarkhe. - Operation Performance Points (OPP) core updates from Nishanth Menon. - Runtime power management core fix from Rafael J Wysocki and update from Ulf Hansson. - Hibernation fixes from Aaron Lu and Rafael J Wysocki. - Device suspend/resume lockup detection mechanism from Benoit Goby. - Removal of unused proc directories created for various ACPI drivers from Lan Tianyu. - ACPI LPSS driver fix and new device IDs for the ACPI platform scan handler from Heikki Krogerus and Jarkko Nikula. - New ACPI _OSI blacklist entry for Toshiba NB100 from Levente Kurusa. - Assorted fixes and cleanups related to ACPI from Andy Shevchenko, Al Stone, Bartlomiej Zolnierkiewicz, Colin Ian King, Dan Carpenter, Felipe Contreras, Jianguo Wu, Lan Tianyu, Yinghai Lu, Mathias Krause, Liu Chuansheng. - Assorted PM fixes and cleanups from Andy Shevchenko, Thierry Reding, Jean-Christophe Plagniol-Villard. * tag 'pm+acpi-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (386 commits) cpufreq: conservative: fix requested_freq reduction issue ACPI / hotplug: Consolidate deferred execution of ACPI hotplug routines PM / runtime: Use pm_runtime_put_sync() in __device_release_driver() ACPI / event: remove unneeded NULL pointer check Revert "ACPI / video: Ignore BIOS initial backlight value for HP 250 G1" ACPI / video: Quirk initial backlight level 0 ACPI / video: Fix initial level validity test intel_pstate: skip the driver if ACPI has power mgmt option PM / hibernate: Avoid overflow in hibernate_preallocate_memory() ACPI / hotplug: Do not execute "insert in progress" _OST ACPI / hotplug: Carry out PCI root eject directly ACPI / hotplug: Merge device hot-removal routines ACPI / hotplug: Make acpi_bus_hot_remove_device() internal ACPI / hotplug: Simplify device ejection routines ACPI / hotplug: Fix handle_root_bridge_removal() ACPI / hotplug: Refuse to hot-remove all objects with disabled hotplug ACPI / scan: Start matching drivers after trying scan handlers ACPI: Remove acpi_pci_slot_init() headers from internal.h ACPI / blacklist: fix name of ThinkPad Edge E530 PowerCap: Fix build error with option -Werror=format-security ... Conflicts: arch/arm/mach-omap2/opp.c drivers/Kconfig drivers/spi/spi.c
2013-11-12intel_idle: Support Intel Atom Processor C2000 Product FamilyLen Brown
Support the "Intel(R) Atom(TM) Processor C2000 Product Family", formerly code-named Avoton. It is based on the next generation Intel Atom processor architecture, formerly code-named Silvermont. Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-30intel_idle: use CPU_TASKS_FROZEN instead of a numeric constantPrarit Bhargava
Small fixup to use CPU_TASKS_FROZEN instead of 0xf. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>