summaryrefslogtreecommitdiff
path: root/drivers/iio/Makefile
AgeCommit message (Collapse)Author
2020-03-27iio: position: Add support for Azoteq IQS624/625 angle sensorsJeff LaBundy
This patch adds support for the Azoteq IQS624 and IQS625 angular position sensors, capable of reporting the angle of a rotating shaft down to 1 and 10 degrees of accuracy, respectively. This patch also introduces a home for linear and angular position sensors. Unlike resolvers, they are typically contactless and use the Hall effect. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-04-25counter: stm32-lptimer: add counter deviceFabrice Gasnier
Add support for new counter device to stm32-lptimer. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-20staging: iio: ad2s1200: Move driver out of stagingDavid Veenstra
Move the iio driver for the ad2s1200 and ad2s1205 resolver-to-digital converter out of staging, into mainline iio subsystems. Signed-off-by: David Veenstra <davidjulianveenstra@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-04-28iio: afe: rescale: new driverPeter Rosin
If an ADC channel measures the midpoint of a voltage divider, the interesting voltage is often the voltage over the full resistance. E.g. if the full voltage is too big for the ADC to handle. Likewise, if an ADC channel measures the voltage across a shunt resistor, with or without amplification, the interesting value is often the current through the resistor. This driver solves these problems by allowing to linearly scale a channel and/or by allowing changes to the type of the channel. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-03iio: multiplexer: new iio category and iio-mux driverPeter Rosin
When a multiplexer changes how an iio device behaves (for example by feeding different signals to an ADC), this driver can be used to create one virtual iio channel for each multiplexer state. Depends on the generic multiplexer subsystem. Cache any ext_info values from the parent iio channel, creating a private copy of the ext_info attributes for each multiplexer state/channel. Reviewed-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-01iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8William Breathitt Gray
The ACCES 104-QUAD-8 is a general purpose quadrature encoder counter/interface board. The 104-QUAD-8 is capable of monitoring the outputs of eight encoders via four on-board LSI/CSI LS7266R1 24-bit dual-axis quadrature counter chips. Core functions handled by the LS7266R1, such as direction and total count, are available. Performing a write to a counter's IIO_CHAN_INFO_RAW sets the counter and also clears the counter's respective error flag. Although the counters have a 25-bit range, only the lower 24 bits may be set, either directly or via a counter's preset attribute. Interrupts are not supported by this driver. This driver adds IIO support for the ACCES 104-QUAD-8 and ACCES 104-QUAD-4. The base port addresses for the devices may be configured via the base array module parameter. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-27iio: potentiostat: add LMP91000 supportMatt Ranostay
Add support for the LMP91000 potentiostat which is used for chemical sensing applications. Signed-off-by: Matt Ranostay <matt@ranostay.consulting> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-04iio: Add support for creating IIO devices via configfsDaniel Baluta
This is similar with support for creating triggers via configfs. Devices will be hosted under: * /config/iio/devices We allow users to register "device types" under: * /config/iio/devices/<device_types>/ Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-12iio: light: add MAX30100 oximeter driver supportMatt Ranostay
MAX30100 is an heart rate and pulse oximeter sensor that works using two LEDS of different wavelengths, and detecting the light reflected back. This patchset adds support for both IR and RED LED channels which can be processed in userspace to determine heart rate and blood oxygen levels. Signed-off-by: Matt Ranostay <mranostay@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-03iio: core: Introduce IIO software triggersDaniel Baluta
A software trigger associates an IIO device trigger with a software interrupt source (e.g: timer, sysfs). This patch adds the generic infrastructure for handling software triggers. Software interrupts sources are kept in a iio_trigger_types_list and registered separately when the associated kernel module is loaded. Software triggers can be created directly from drivers or from user space via configfs interface. To sum up, this dynamically creates "triggers" group to be found under /config/iio/triggers and offers the possibility of dynamically creating trigger types groups. The first supported trigger type is "hrtimer" found under /config/iio/triggers/hrtimer. Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-03iio: core: Introduce IIO configfs supportDaniel Baluta
This patch creates the IIO configfs root group. The group will appear under <mount-point>/iio/, usually /config/iio. We introduce configfs support in IIO in order to be able to easily create IIO objects from userspace. The first supported IIO objects are triggers introduced with next patches. Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Tested-by: Matt Ranostay <matt.ranostay@intel> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-25iio: Move IIO Dummy Driver out of stagingCristina Opriceana
This patch moves the reference IIO dummy driver from drivers/staging/iio into a separate folder, drivers/iio/dummy and adds the proper Kconfig and Makefile for it. A new config menu entry called IIO dummy driver has also been added in the Industrial I/O support menu, corresponding to this driver. Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-09-30iio: mcp4531: Driver for Microchip digital potentiometersPeter Rosin
Add support for Microchip digital potentiometers and rheostats MCP4531, MCP4532, MCP4551, MCP4552 MCP4631, MCP4632, MCP4651, MCP4652 DEVICE Wipers Steps Resistor Opts (kOhm) i2c address MCP4531 1 129 5, 10, 50, 100 010111x MCP4532 1 129 5, 10, 50, 100 01011xx MCP4551 1 257 5, 10, 50, 100 010111x MCP4552 1 257 5, 10, 50, 100 01011xx MCP4631 2 129 5, 10, 50, 100 0101xxx MCP4632 2 129 5, 10, 50, 100 01011xx MCP4651 2 257 5, 10, 50, 100 0101xxx MCP4652 2 257 5, 10, 50, 100 01011xx Datasheet: http://www.microchip.com/downloads/en/DeviceDoc/22096b.pdf Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-09-23iio: chemical: add SGX VZ89x VOC sensor supportMatt Ranostay
Add support for VZ89X sensors VOC and CO2 reporting channels in percentage which can be converted to part per million. Signed-off-by: Matt Ranostay <mranostay@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-27iio: Support triggered eventsVladimir Barinov
Support triggered events. This is useful for chips that don't have their own interrupt sources. It allows to use generic/standalone iio triggers for those drivers. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-16iio: Move generic buffer implementations to sub-directoryLars-Peter Clausen
For generic IIO trigger implementations we already have a sub-directory, but the generic buffer implementations currently reside in the IIO top-level directory. The main reason is that things have historically grown into this form. With more generic buffer implementations on its way now is the perfect time to clean this up and introduce a sub-directory for generic buffer implementations to avoid too much clutter in the top-level directory. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-15iio: Move callback buffer to its own moduleLars-Peter Clausen
Currently the IIO callback buffer implementation is directly built into the IIO core module when enabled. Given that the callback buffer module is standalone functionallity there is really no reason to do this. So move it to its own module. Also rename the source to follow the standard IIO module naming convention as well as add a license notice to the file. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-03-16iio: Add AS3935 lightning sensor supportMatt Ranostay
AS3935 chipset can detect lightning strikes and reports those back as events and the estimated distance to the storm. Signed-off-by: Matt Ranostay <mranostay@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-12-03iio: hid-sensors: Added Inclinometer 3DSrinivas Pandruvada
Added usage id processing for Inclinometer 3D. This uses IIO interfaces for triggered buffer to present data to user mode.This uses HID sensor framework for registering callback events from the sensor hub. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-12-03iio: Add new driver dht11Harald Geyer
This driver handles DHT11 and DHT22 sensors. Signed-off-by: Harald Geyer <harald@ccbib.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-17iio: Restore alphabetic order in MakefilePeter Meerwald
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-17iio: Add tmp006 IR temperature sensorPeter Meerwald
the TI TMP006 is a non-contact temperature sensor with I2C interface; it measures the surface temperature of a distance object using a thermopile to absorb IR energy emitted from the object the sensor has two channels: IR sensor voltage (16-bit) and reference temperature of the chip (14-bit); datasheet is here: http://www.ti.com/lit/ds/symlink/tmp006.pdf v2 (thanks to Grygorii Strashko, Lars-Peter Clausen, Jonathan Cameron for review comments): * power down device on driver remove * use sign_extend32() * style cleanup * add comments what channel raw LSBs mean * spelling of thermopile Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Jonathan Cameron <jic23@kernel.org> Cc: LM Sensors <lm-sensors@lm-sensors.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-05Revert "iio: add configuration option for debug support"Greg Kroah-Hartman
This reverts commit 98a5e9e99d05e9b6a14778b85631b55e8e349990. IIO, like the rest of the kernel, should rely on dynamic debugging, not have a special config option for it. That way, no user has to rebuild their kernel to have debug messages, which is a good thing, let's not revert back to the bad old days of the 2000's. Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-03iio: add configuration option for debug supportOtavio Salvador
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-06-05iio:pressure: Add STMicroelectronics pressures driverDenis CIOCCA
This patch adds a generic pressure driver for STMicroelectronics pressure sensors, currently it supports: LPS331AP. Signed-off-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-05-22iio:trigger:sysfs Move out of staging.Jonathan Cameron
This simple driver is rather useful. No issues about its interface have been raised for some time hence the proposal to move it out of staging. Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-19staging:iio: Move adis library out of stagingLars-Peter Clausen
Now that the adis library no longer depends on the sw_ring buffer implementation we can move it out of staging. While we are at it also sort the entries in the iio Kconfig and Makefile to be in alphabetical order. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-10staging:iio: add a callback buffer for in kernel push interfaceJonathan Cameron
This callback buffer is meant to be opaque to users, but basically adds a very simple pass through buffer to which data may be pushed when it is inserted into the buffer list. Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19iio: Remove duplicates for light/ in Kconfig and MakefileAndreas Larsson
Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-06iio: hid-sensors: Added ALSsrinivas pandruvada
Added usage id processing for ALS. This uses IIO interfaces for triggered buffer to present data to user mode.This uses HID sensor framework for registering callback events from the sensor hub. Signed-off-by: srinivas pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-06iio: hid-sensors: Added Compass/Magnetometer 3Dsrinivas pandruvada
Added usage id processing for Compass 3D. This uses IIO interfaces for triggered buffer to present data to user mode.This uses HID sensor framework for registering callback events from the sensor hub. Signed-off-by: srinivas pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-06iio: hid-sensors: Added Gyroscope 3Dsrinivas pandruvada
Added usage id processing for Gyroscope 3D. This uses IIO interfaces for triggered buffer to present data to user mode.This uses HID sensor framework for registering callback events from the sensor hub. Signed-off-by: srinivas pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-06iio: hid-sensors: Added accelerometer 3Dsrinivas pandruvada
Added usage id processing for Accelerometer 3D.This uses IIO interfaces for triggered buffer to present data to user mode.This uses HID sensor framework for registering callback events from the sensor hub. Signed-off-by: srinivas pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-06iio: hid-sensors: Common attribute and triggersrinivas pandruvada
This patch contains the common code, which is used by all HID sensors. There are some common set of attributes, which every hid sensor needs it. This patch contains all such attributes processing. Also the trigger interface is common among all HID sensors. This patch contains common trigger functions utilized by all HID sensors. Signed-off-by: srinivas pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-06-18iio: Add helper function for initializing triggered buffersLars-Peter Clausen
Add a helper function for executing the common tasks which are usually involved in setting up a simple software ringbuffer. It will allocate the buffer, allocate the pollfunc and register the buffer. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-05staging:iio: Move DAC drivers out of stagingLars-Peter Clausen
The IIO DAC drivers are in a reasonably good shape. They all make use of channel spec and non of them provides non-documented sysfs attributes. Code style should be OK as well, both checkpatch and coccicheck only report trivial issues. So lets move the whole folder out of staging. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-04iio: frequency: New driver for AD9523 SPI Low Jitter Clock GeneratorMichael Hennerich
Changes since V1: Apply Jonathan's review feedback: Revise device status attribute names, and split documentation into two sections. Add additional comments, and fix indention issues. Remove pointless zero initializations. Revise return value handling. Simplify some code sections. Split store_eeprom and sync handling into separate functions. Use strtobool where applicable. Document platform data structures using kernel-doc style. Use dev_to_iio_dev write_raw IIO_CHAN_INFO_FREQUENCY: Reject values <= 0 Make patch target drivers/iio Changes since V2: Use for_each_clear_bit() and __set_bit() where applicable. Add descriptive comment. Avoid temporary for struct regulator. spi_device_id name use ad9523-1, ad9523 will be added later. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-04iio: add LM3533 ambient-light-sensor driverJohan Hovold
Add sub-driver for the ambient-light-sensor interface on National Semiconductor / TI LM3533 lighting power chips. The sensor interface can be used to control the LEDs and backlights of the chip through defining five light zones and three sets of corresponding output-current values. The driver provides raw and mean adc readings along with the current light zone through sysfs. A threshold event can be generated on zone changes. The ALS-control output values can be set per zone for the three current output channels. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14ARM: AT91: IIO: Add AT91 ADC driver.Maxime Ripard
Add the ADC driver for Atmel's AT91SAM9G20-EK, AT91SAM9M10G45-EK and AT91SAM9X5 family boards. It has support for both software and hardware triggers. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14iio: amplifiers: New driver for AD8366 Dual-Digital Variable Gain AmplifierMichael Hennerich
Changes since V1: Apply review feedback: Introduce and use IIO_CHAN_INFO_HARDWAREGAIN Introduce and use Use IIO_VAL_INT_PLUS_MICRO_DB Modify out of staging include paths. Convert to new iio core API naming. Changes since V2: more sanity checking in write_raw Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-25IIO: Move the core files to drivers/iioJonathan Cameron
Take the core support + the kfifo buffer implentation out of staging. Whilst we are far from done in improving this subsystem it is now at a stage where the userspae interfaces (provided by the core) can be considered stable. Drivers will follow over a longer time scale. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>