summaryrefslogtreecommitdiff
path: root/drivers/iio/adc
AgeCommit message (Collapse)Author
2023-04-27Merge tag 'char-misc-6.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc drivers updates from Greg KH: "Here is the "big" set of char/misc and other driver subsystems for 6.4-rc1. It's pretty big, but due to the removal of pcmcia drivers, almost breaks even for number of lines added vs. removed, a nice change. Included in here are: - removal of unused PCMCIA drivers (finally!) - Interconnect driver updates and additions - Lots of IIO driver updates and additions - MHI driver updates - Coresight driver updates - NVMEM driver updates, which required some OF updates - W1 driver updates and a new maintainer to manage the subsystem - FPGA driver updates - New driver subsystem, CDX, for AMD systems - lots of other small driver updates and additions All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (196 commits) mcb-lpc: Reallocate memory region to avoid memory overlapping mcb-pci: Reallocate memory region to avoid memory overlapping mcb: Return actual parsed size when reading chameleon table kernel/configs: Drop Android config fragments virt: acrn: Replace obsolete memalign() with posix_memalign() spmi: Add a check for remove callback when removing a SPMI driver spmi: fix W=1 kernel-doc warnings spmi: mtk-pmif: Drop of_match_ptr for ID table spmi: pmic-arb: Convert to platform remove callback returning void spmi: mtk-pmif: Convert to platform remove callback returning void spmi: hisi-spmi-controller: Convert to platform remove callback returning void w1: gpio: remove unnecessary ENOMEM messages w1: omap-hdq: remove unnecessary ENOMEM messages w1: omap-hdq: add SPDX tag w1: omap-hdq: allow compile testing w1: matrox: remove unnecessary ENOMEM messages w1: matrox: use inline over __inline__ w1: matrox: switch from asm to linux header w1: ds2482: do not use assignment in if condition w1: ds2482: drop unnecessary header ...
2023-04-25Merge tag 'acpi-6.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These update the ACPICA code in the kernel to upstream revision 20230331, fix the ACPI SBS driver and the evaluation of the _PDC method on Xen dom0 in the ACPI processor driver, update the ACPI driver for Intel SoCs and clean up code in multiple places. Specifics: - Update the ACPICA code in the kernel to upstream revision 20230331 including the following changes: * Delete bogus node_array array of pointers from AEST table (Jessica Clarke) * Add support for trace buffer extension in GICC to the ACPI MADT parser (Xiongfeng Wang) * Add missing macro ACPI_FUNCTION_TRACE() for acpi_ns_repair_HID() (Xiongfeng Wang) * Add missing tables to astable (Pedro Falcato) * Add support for 64 bit loong_arch compilation to ACPICA (Huacai Chen) * Add support for ASPT table in disassembler to ACPICA (Jeremi Piotrowski) * Add support for Arm's MPAM ACPI table version 2 (Hesham Almatary) * Update all copyrights/signons in ACPICA to 2023 (Bob Moore) * Add support for ClockInput resource (v6.5) (Niyas Sait) * Add RISC-V INTC interrupt controller definition to the list of supported interrupt controllers for MADT (Sunil V L) * Add structure definitions for the RISC-V RHCT ACPI table (Sunil V L) * Address several cases in which the ACPICA code might lead to undefined behavior (Tamir Duberstein) * Make ACPICA code support flexible arrays properly (Kees Cook) * Check null return of ACPI_ALLOCATE_ZEROED in acpi_db_display_objects() (void0red) * Add os specific support for Zephyr RTOS to ACPICA (Najumon) * Update version to 20230331 (Bob Moore) - Fix evaluating the _PDC ACPI control method when running as Xen dom0 (Roger Pau Monne) - Use platform devices to load ACPI PPC and PCC drivers (Petr Pavlu) - Check for null return of devm_kzalloc() in fch_misc_setup() (Kang Chen) - Log a message if enable_irq_wake() fails for the ACPI SCI (Simon Gaiser) - Initialize the correct IOMMU fwspec while parsing ACPI VIOT (Jean-Philippe Brucker) - Amend indentation and prefix error messages with FW_BUG in the ACPI SPCR parsing code (Andy Shevchenko) - Enable ACPI sysfs support for CCEL records (Kuppuswamy Sathyanarayanan) - Make the APEI error injection code warn on invalid arguments when explicitly indicated by platform (Shuai Xue) - Add CXL error types to the error injection code in APEI (Tony Luck) - Refactor acpi_data_prop_read_single() (Andy Shevchenko) - Fix two issues in the ACPI SBS driver (Armin Wolf) - Replace ternary operator with min_t() in the generic ACPI thermal zone driver (Jiangshan Yi) - Ensure that ACPI notify handlers are not running after removal and clean up code in acpi_sb_notify() (Rafael Wysocki) - Remove register_backlight_delay module option and code and remove quirks for false-positive backlight control support advertised on desktop boards (Hans de Goede) - Replace irqdomain.h include with struct declarations in ACPI headers and update several pieces of code previously including of.h implicitly through those headers (Rob Herring) - Fix acpi_evaluate_dsm_typed() redefinition error (Kiran K) - Update the pm_profile sysfs attribute documentation (Rafael Wysocki) - Add 80862289 ACPI _HID for second PWM controller on Cherry Trail to the ACPI driver for Intel SoCs (Hans de Goede)" * tag 'acpi-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits) ACPI: LPSS: Add 80862289 ACPI _HID for second PWM controller on Cherry Trail ACPI: bus: Ensure that notify handlers are not running after removal ACPI: bus: Add missing braces to acpi_sb_notify() ACPI: video: Remove desktops without backlight DMI quirks ACPI: video: Remove register_backlight_delay module option and code ACPI: Replace irqdomain.h include with struct declarations fpga: lattice-sysconfig-spi: Add explicit include for of.h tpm: atmel: Add explicit include for of.h virtio-mmio: Add explicit include for of.h pata: ixp4xx: Add explicit include for of.h ata: pata_macio: Add explicit include of irqdomain.h serial: 8250_tegra: Add explicit include for of.h net: rfkill-gpio: Add explicit include for of.h staging: iio: resolver: ad2s1210: Add explicit include for of.h iio: adc: ad7292: Add explicit include for of.h ACPICA: Update version to 20230331 ACPICA: add os specific support for Zephyr RTOS ACPICA: ACPICA: check null return of ACPI_ALLOCATE_ZEROED in acpi_db_display_objects ACPICA: acpi_resource_irq: Replace 1-element arrays with flexible array ACPICA: acpi_madt_oem_data: Fix flexible array member definition ...
2023-04-25Merge tag 'thermal-6.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control updates from Rafael Wysocki: "These mostly continue to prepare the thermal control subsystem for using unified representation of trip points, which includes cleanups, code refactoring and similar and update several drivers (for other reasons), which includes new hardware support. Specifics: - Add a thermal zone 'devdata' accessor and modify several drivers to use it (Daniel Lezcano) - Prevent drivers from using the 'device' internal thermal zone structure field directly (Daniel Lezcano) - Clean up the hwmon thermal driver (Daniel Lezcano) - Add thermal zone id accessor and thermal zone type accessor and prevent drivers from using thermal zone fields directly (Daniel Lezcano) - Clean up the acerhdf and tegra thermal drivers (Daniel Lezcano) - Add lower bound check for sysfs input to the x86_pkg_temp_thermal Intel thermal driver (Zhang Rui) - Add more thermal zone device encapsulation: prevent setting structure field directly, access the sensor device instead the thermal zone's device for trace, relocate the traces in drivers/thermal (Daniel Lezcano) - Use the generic trip point for the i.MX and remove the get_trip_temp ops (Daniel Lezcano) - Use the devm_platform_ioremap_resource() in the Hisilicon driver (Yang Li) - Remove R-Car H3 ES1.* handling as public has only access to the ES2 version and the upstream support for the ES1 has been shutdown (Wolfram Sang) - Add a delay after initializing the bank in order to let the time to the hardware to initialze itself before reading the temperature (Amjad Ouled-Ameur) - Add MT8365 support (Amjad Ouled-Ameur) - Preparational cleanup and DT bindings for RK3588 support (Sebastian Reichel) - Add driver support for RK3588 (Finley Xiao) - Use devm_reset_control_array_get_exclusive() for the Rockchip driver (Ye Xingchen) - Detect power gated thermal zones and return -EAGAIN when reading the temperature (Mikko Perttunen) - Remove thermal_bind_params structure as it is unused (Zhang Rui) - Drop unneeded quotes in DT bindings allowing to run yamllint (Rob Herring) - Update the power allocator documentation according to the thermal trace relocation (Lukas Bulwahn) - Fix sensor 1 interrupt status bitmask for the Mediatek LVTS sensor (Chen-Yu Tsai) - Use the dev_err_probe() helper in the Amlogic driver (Ye Xingchen) - Add AP domain support to LVTS thermal controllers for mt8195 (Balsam CHIHI) - Remove buggy call to thermal_of_zone_unregister() (Daniel Lezcano) - Make thermal_of_zone_[un]register() private to the thermal OF code (Daniel Lezcano) - Create a private copy of the thermal zone device parameters structure when registering a thermal zone (Daniel Lezcano) - Fix a kernel NULL pointer dereference in thermal_hwmon (Zhang Rui) - Revert recent message adjustment in thermal_hwmon (Rafael Wysocki) - Use of_property_present() for testing DT property presence in thermal control code (Rob Herring) - Clean up thermal_list_lock locking in the thermal core (Rafael Wysocki) - Add DLVR support for RFIM control in the int340x Intel thermal driver (Srinivas Pandruvada)" * tag 'thermal-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (55 commits) thermal: intel: int340x: Add DLVR support for RFIM control thermal/core: Alloc-copy-free the thermal zone parameters structure thermal/of: Unexport unused OF functions thermal/drivers/bcm2835: Remove buggy call to thermal_of_zone_unregister thermal/drivers/mediatek/lvts_thermal: Add AP domain for mt8195 dt-bindings: thermal: mediatek: Add AP domain to LVTS thermal controllers for mt8195 thermal: amlogic: Use dev_err_probe() thermal/drivers/mediatek/lvts_thermal: Fix sensor 1 interrupt status bitmask MAINTAINERS: adjust entry in THERMAL/POWER_ALLOCATOR after header movement dt-bindings: thermal: Drop unneeded quotes thermal/core: Remove thermal_bind_params structure thermal/drivers/tegra-bpmp: Handle offline zones thermal/drivers/rockchip: use devm_reset_control_array_get_exclusive() dt-bindings: rockchip-thermal: Support the RK3588 SoC compatible thermal/drivers/rockchip: Support RK3588 SoC in the thermal driver thermal/drivers/rockchip: Support dynamic sized sensor array thermal/drivers/rockchip: Simplify channel id logic thermal/drivers/rockchip: Use dev_err_probe thermal/drivers/rockchip: Simplify clock logic thermal/drivers/rockchip: Simplify getting match data ...
2023-04-24Merge branches 'acpi-bus', 'acpi-video' and 'acpi-misc'Rafael J. Wysocki
Merge ACPI bus type driver changes, ACPI backlight driver updates and a series of cleanups related to of.h for 6.4-rc1: - Ensure that ACPI notify handlers are not running after removal and clean up code in acpi_sb_notify() (Rafael Wysocki). - Remove register_backlight_delay module option and code and remove quirks for false-positive backlight control support advertised on desktop boards (Hans de Goede). - Replace irqdomain.h include with struct declarations in ACPI headers and update several pieces of code previously including of.h implicitly through those headers (Rob Herring). * acpi-bus: ACPI: bus: Ensure that notify handlers are not running after removal ACPI: bus: Add missing braces to acpi_sb_notify() * acpi-video: ACPI: video: Remove desktops without backlight DMI quirks ACPI: video: Remove register_backlight_delay module option and code * acpi-misc: ACPI: Replace irqdomain.h include with struct declarations fpga: lattice-sysconfig-spi: Add explicit include for of.h tpm: atmel: Add explicit include for of.h virtio-mmio: Add explicit include for of.h pata: ixp4xx: Add explicit include for of.h ata: pata_macio: Add explicit include of irqdomain.h serial: 8250_tegra: Add explicit include for of.h net: rfkill-gpio: Add explicit include for of.h staging: iio: resolver: ad2s1210: Add explicit include for of.h iio: adc: ad7292: Add explicit include for of.h
2023-04-14Merge back Intel thermal control material for 6.4-rc1.Rafael J. Wysocki
2023-04-13iio: adc: palmas: don't alter event config on suspend/resumePatrik Dahlström
The event config is controlled through the IIO events subsystem and device wakeup is controlled by /sys/devices/.../power/wakeup. Let's keep those two knobs independent. Signed-off-by: Patrik Dahlström <risca@dalakolonin.se> Link: https://lore.kernel.org/r/20230408114825.824505-10-risca@dalakolonin.se Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-04-13iio: adc: palmas: add support for iio threshold eventsPatrik Dahlström
The palmas gpadc block has support for monitoring up to 2 ADC channels and issue an interrupt if they reach past a set threshold. This change hooks into the IIO events system and exposes to userspace the ability to configure these threshold values for each channel, but only allow up to 2 such thresholds to be enabled at any given time. Trying to enable a third channel will result in an error. Userspace is expected to input calibrated, as opposed to raw, values as threshold. However, it is not enough to do the opposite of what is done when converting the other way around. To account for tolerances in the ADC, the calculated raw threshold should be adjusted based on the ADC specifications for the device. These specifications include the integral nonlinearity (INL), offset, and gain error. To adjust the high threshold, use the following equation: (calibrated value + INL) * Gain error + offset = maximum value [1] Likewise, use the following equation for the low threshold: (calibrated value - INL) * Gain error - offset = minimum value The gain error is a combination of gain error, as listed in the datasheet, and gain error drift due to temperature and supply. The exact values for these specifications vary between palmas devices. This patch sets the values found in TWL6035, TWL6037 datasheet. [1] TI Application Report, SLIA087A, Guide to Using the GPADC in TPS65903x, TPS65917-Q1, TPS65919-Q1, and TPS65916 Devices. Signed-off-by: Patrik Dahlström <risca@dalakolonin.se> Link: https://lore.kernel.org/r/20230408114825.824505-9-risca@dalakolonin.se Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-04-13iio: adc: palmas: always reset events on unloadPatrik Dahlström
This prevents leaving the adc in freerunning mode when removing the driver. Signed-off-by: Patrik Dahlström <risca@dalakolonin.se> Link: https://lore.kernel.org/r/20230408114825.824505-8-risca@dalakolonin.se Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-04-13iio: adc: palmas: move eventX_enable into palmas_adc_eventPatrik Dahlström
It just makes more sense to have all information regarding adc events in one place. Signed-off-by: Patrik Dahlström <risca@dalakolonin.se> Link: https://lore.kernel.org/r/20230408114825.824505-7-risca@dalakolonin.se Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-04-13iio: adc: palmas: use iio_event_direction for threshold polarityPatrik Dahlström
Instead of having high_threshold > 0 as an indicator for upper threshold event and lower threshold event otherwise, use enum iio_event_direction instead. This is hopefully less ambiguous. Signed-off-by: Patrik Dahlström <risca@dalakolonin.se> Link: https://lore.kernel.org/r/20230408114825.824505-6-risca@dalakolonin.se Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-04-13iio: adc: palmas: replace "wakeup" with "event"Patrik Dahlström
The palmas gpadc block has support for monitoring up to 2 ADC channels and issue an interrupt if they reach past a set threshold. This is currently used to wake up the system from sleep, but the functionality is more generic than that. As such, change the naming of functions and variables to refer to it as events instead, except during suspend and resume where wakeup still make sense. Signed-off-by: Patrik Dahlström <risca@dalakolonin.se> Link: https://lore.kernel.org/r/20230408114825.824505-5-risca@dalakolonin.se Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-04-13iio: adc: palmas: remove adc_wakeupX_dataPatrik Dahlström
It does not seem to be used by anyone and later patches in this series are made simpler by first removing this. There is now a lot of dead code that cannot be reached, until later patches revive it. Arguably, this is preferred over removing the code only to add it again. Signed-off-by: Patrik Dahlström <risca@dalakolonin.se> Link: https://lore.kernel.org/r/20230408114825.824505-4-risca@dalakolonin.se Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-04-13iio: adc: palmas: Take probe fully device managed.Jonathan Cameron
Review of a recent fix highlighted that this driver could be trivially converted to be entirely devm managed. That fix should be applied to resolve the fix in a fashion easy to back port even though this change removes the relevant code. [1] https://patchwork.kernel.org/project/linux-iio/patch/20230313205029.1881745-1-risca@dalakolonin.se/ Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Tested-by: Patrik Dahlström <risca@dalakolonin.se> Reviewed-by: Patrik Dahlström <risca@dalakolonin.se> Link: https://lore.kernel.org/r/20230318163039.56115-1-jic23@kernel.org
2023-04-12Merge tag 'iio-for-6.4a' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: 1st set of IIO new device support, features and cleanups for the 6.4 cycle. New device support * bosch,bmp280 - Add support for BMP580 - includes significant refactoring and general driver cleanup + support for non-volatile memory for trimming and config parameters. * rohm BU27034 - New driver for this 3 channel ambient light sensor. - New support library for devices where both integration time and amplifier gain are configurable. In these cases a scale change may require changing bother underlying values. This library module provides code to help with this. * st,accel - Add support for IIS328DQ (ID only as compatible wtih LIS331DL) * st,lsm6dsx - Add support for ASM330LHB automotive MEMS sensor. * ti,ads1100, ads1000 - New driver for these 16 bit ADCs. * ti,tmp117 - Add support for older tmp116 device. Includes some general driver cleanup. Staging driver drops * adi,ade7854 - Driver was a very long way from compliant with IIO infrastructure and ABI. If anyone wants a non staging version of this driver they are better off starting from scratch. Hence drop it and the associated meter.h header. Features * adi,ad7441r - Add DT binding to set sink current for digital input. * semtech,sx9324,9360 - Support older register mapping from firmware designed for windows. Core improvements. * Move iio_trigger_poll() docs to next to the implementation and add a note on expected caller context. * Rename iio_trigger_poll_chained() to iio_trigger_poll_nested() so as to use more standard / common terminology. * Improve main ABI docs references to offset and scale for raw values by making them consistent and clear. Cleanups and minor fixes: * adi,ad5592r - Add GPIO names - useful for debug. * adi,ad7441r - Fix current input, loop powered mode configuration setup. * adi,adis16475 - Fix wrong commented value for minimum advised lower rate. * adi,admv1013 - Use devm_clk_get_enabled() to reduce boilerplate. * adi,ads1210 - Fix wrong bits for writing config register (late fix and has been broken a long time so not rushed upstream) * amlogic,meson-saradc - Improve cleanup in error handling if BL30 handshake fails. * apex-embedded,stx104 - Migrate to regmap and use regmap_read_poll_timeout() to neatly handle retries. - Add local mutex to close various races. - Use define U16_MAX rather than value for limit. - Improve code readability with minor reorganization. * atmel,ad91-sama5d2 - Drop trivial dead code. * kionix,kx022a - Drop unused structure element. * linear,ltc2983 - Reorganize bindings doc to enable unevaluatedProperties to be set in one place for all child nodes. - Make binding for adi,custom-thermocouple accept signed values. * maxim,max44000 - Add OF Device matching (of_match_table was not correctly set). * maxim,max5522 - Missing static * measurement-computing,cio-dac - Fix wrong part name in comments. - Migrate to regmap. - Improve includes by replacing bitops.h with more direct bits.h * qcom,pm8xxx-xoadc - Remove a check that can never fail. * renesas,rcar-gyroadc - DT binding documentation improvements. - Tidy up an unused warning with __maybe_unused. * semtech,sx_common - Drop docs for a structure element that doesn't exist. * semtech,sx9500 - Drop ACPI_PTR() and of_match_ptr() protections that just complicate the code / block some firmware registration types that would otherwise work. * sensiron,sps30 - Comment formatting tidy up. * st,sensors - Drop duplicate text in DT binding. * st,stm32-adc - Add some missing static markings. * ti,ads1100 - Use correct return code in dev_err_probe() call. * x-powers,axp20x_adc - precursor series to simplify addition of AXP192. - General code cleanup / minor refactoring for better readabilty of code. - Switch from boolean value to mask for adc_en2 field to avoid hard coding a mask that will be different in AXP192 * tag 'iio-for-6.4a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (63 commits) MAINTAINERS: Add ROHM BU27034 iio: light: ROHM BU27034 Ambient Light Sensor dt-bindings: iio: light: Support ROHM BU27034 MAINTAINERS: Add IIO gain-time-scale helpers iio: light: Add gain-time-scale helpers doc: Make sysfs-bus-iio doc more exact iio: dac: set variable max5522_channels storage-class-specifier to static dt-bindings: iio: temperature: ltc2983: Make 'adi,custom-thermocouple' signed dt-bindings: iio: temperature: ltc2983: Fix child node unevaluated properties iio: addac: stx104: Use regmap_read_poll_timeout() for conversion poll iio: addac: stx104: Migrate to the regmap API iio: addac: stx104: Improve indentation in stx104_write_raw() iio: addac: stx104: Use define rather than hardcoded limit for write val iio: addac: stx104: Fix race condition when converting analog-to-digital iio: addac: stx104: Fix race condition for stx104_write_raw() dt-bindings: iio: st-sensors: Fix repeated text staging: iio: resolver: ads1210: fix config mode iio: adc: ti-ads1100: fix error code in probe() iio: accel: add support for IIS328DQ variant dt-bindings: iio: st-sensors: Add IIS328DQ accelerometer ...
2023-04-10iio: adc: ti-ads1100: fix error code in probe()Dan Carpenter
This code has a copy and paste bug so it accidentally returns "PTR_ERR(data->reg_vdd)" which is a valid pointer cast to int. It should return "ret" instead. Fixes: 541880542f2b ("iio: adc: Add TI ADS1100 and ADS1000") Signed-off-by: Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/r/36fa2aeb-f392-4793-8b38-ae15514033c8@kili.mountain Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-04-06iio: adc: ad7292: Add explicit include for of.hRob Herring
With linux/acpi.h no longer implicitly including of.h, add an explicit include of of.h to fix the following error: drivers/iio/adc/ad7292.c:307:9: error: implicit declaration of function 'for_each_available_child_of_node'; did you mean 'fwnode_for_each_available_child_node'? [-Werror=implicit-function-declaration] Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-04-01iio: adc: at91-sama5d2_adc: fix an error code in at91_adc_allocate_trigger()Dan Carpenter
The at91_adc_allocate_trigger() function is supposed to return error pointers. Returning a NULL will cause an Oops. Fixes: 5e1a1da0f8c9 ("iio: adc: at91-sama5d2_adc: add hw trigger and buffer support") Signed-off-by: Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/r/5d728f9d-31d1-410d-a0b3-df6a63a2c8ba@kili.mountain Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-03-28Merge tag 'iio-fixes-for-6.3a' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus Jonathan writes: 1st set of IIO fixes for 6.3 Usual mixed bag: - core - output buffers Fix return of bytes written when only some succeed. Fix O_NONBLOCK handling to not block. - adi,ad7791 Fix IRQ type. Not confirmed to have any impact but good to correct it anyway - adi,adis16400 Missing CONFIG_CRC32 - capella,cm32181 Unregister 2nd I2C client if one is used. - cio-dac Fix bitdepth for range check on write. - linear,ltc2497 Fix a wrong shift of the LSB introduced when switching to be24 handling. - maxim,max11410 Fix handling of return code in read_poll_timeout() - qcom,spmi-adc Fix an accidental change of channel name to include the reg value from OF. - ti,palmas Fix a null dereference on remove due to wrong function used to get the drvdata. - ti,ads7950 Mark GPIO as can sleep. * tag 'iio-fixes-for-6.3a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: adc: ti-ads7950: Set `can_sleep` flag for GPIO chip iio: adc: palmas_gpadc: fix NULL dereference on rmmod iio: adc: max11410: fix read_poll_timeout() usage iio: dac: cio-dac: Fix max DAC write value check for 12-bit iio: light: cm32181: Unregister second I2C client if present iio: accel: kionix-kx022a: Get the timestamp from the driver's private data in the trigger_handler iio: adc: ad7791: fix IRQ flags iio: buffer: make sure O_NONBLOCK is respected iio: buffer: correctly return bytes written in output buffers iio: light: vcnl4000: Fix WARN_ON on uninitialized lock iio: adis16480: select CONFIG_CRC32 drivers: iio: adc: ltc2497: fix LSB shift iio: adc: qcom-spmi-adc5: Fix the channel name
2023-03-18iio: adc: ti-ads7950: Set `can_sleep` flag for GPIO chipLars-Peter Clausen
The ads7950 uses a mutex as well as SPI transfers in its GPIO callbacks. This means these callbacks can sleep and the `can_sleep` flag should be set. Having the flag set will make sure that warnings are generated when calling any of the callbacks from a potentially non-sleeping context. Fixes: c97dce792dc8 ("iio: adc: ti-ads7950: add GPIO support") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: David Lechner <david@lechnology.com> Link: https://lore.kernel.org/r/20230312210933.2275376-1-lars@metafoo.de Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-03-18iio: adc: palmas_gpadc: fix NULL dereference on rmmodPatrik Dahlström
Calling dev_to_iio_dev() on a platform device pointer is undefined and will make adc NULL. Signed-off-by: Patrik Dahlström <risca@dalakolonin.se> Link: https://lore.kernel.org/r/20230313205029.1881745-1-risca@dalakolonin.se Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-03-18iio: adc: at91-sama5d2_adc: remove dead code in at91_adc_probe()Cheng Ziqiu
From the comment of platform_get_irq(), it only returns non-zero IRQ number and negative error number, other than zero. Fix this by removing the if condition. Signed-off-by: Cheng Ziqiu <chengziqiu@hust.edu.cn> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230314070130.60581-1-chengziqiu@hust.edu.cn Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-03-18iio: adc: qcom-pm8xxx-xoadc: Remove useless condition in ↵Kasumov Ruslan
pm8xxx_xoadc_parse_channel() The left side of the loop condition never becomes false. hwchan cannot be NULL, because it points to elements of the hw_channels array that takes one of 4 predefined values: pm8018_xoadc_channels, pm8038_xoadc_channels, pm8058_xoadc_channels, pm8921_xoadc_channels. Found by Linux Verification Center (linuxtesting.org) with SVACE. Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kasumov Ruslan <s02210418@gse.cs.msu.ru> Link: https://lore.kernel.org/r/20230315135114.22684-1-xhxgldhlpfy@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-03-12iio: adc: stm32-adc: set some stm32-adc.c variables storage-class-specifier ↵Tom Rix
to static smatch reports several warnings drivers/iio/adc/stm32-adc.c:2591:20: warning: symbol 'stm32_adc_min_ts_h7' was not declared. Should it be static? drivers/iio/adc/stm32-adc.c:2610:20: warning: symbol 'stm32_adc_min_ts_mp1' was not declared. Should it be static? drivers/iio/adc/stm32-adc.c:2630:20: warning: symbol 'stm32_adc_min_ts_mp13' was not declared. Should it be static? These variables are only used in stm32-adc.c, so they should be static Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20230312161733.470617-1-trix@redhat.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-03-12iio: adc: max11410: fix read_poll_timeout() usageNuno Sá
Even though we are passing 'ret' as stop condition for read_poll_timeout(), that return code is still being ignored. The reason is that the poll will stop if the passed condition is true which will happen if the passed op() returns error. However, read_poll_timeout() returns 0 if the *complete* condition evaluates to true. Therefore, the error code returned by op() will be ignored. To fix this we need to check for both error codes: * The one returned by read_poll_timeout() which is either 0 or ETIMEDOUT. * The one returned by the passed op(). Fixes: a44ef7c46097 ("iio: adc: add max11410 adc driver") Signed-off-by: Nuno Sá <nuno.sa@analog.com> Acked-by: Ibrahim Tilki <Ibrahim.Tilki@analog.com> Link: https://lore.kernel.org/r/20230307095303.713251-1-nuno.sa@analog.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-03-12iio: adc: Add TI ADS1100 and ADS1000Mike Looijmans
The ADS1100 is a 16-bit ADC (at 8 samples per second). The ADS1000 is similar, but has a fixed data rate. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230307065535.7927-2-mike.looijmans@topic.nl Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-03-11iio: adc: rcar-gyroadc: mark OF related data as maybe unusedKrzysztof Kozlowski
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/iio/adc/rcar-gyroadc.c:286:34: error: ‘rcar_gyroadc_child_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230311111457.251475-1-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-03-11iio: Rename iio_trigger_poll_chained and add kernel-docMehdi Djait
Rename the function to iio_trigger_poll_nested. Add kernel-doc with a note on the context where the function is expected to be called. Signed-off-by: Mehdi Djait <mehdi.djait.k@gmail.com> Link: https://lore.kernel.org/r/841b533cba28ca25a8e87280c44e45979166e8e2.1677761379.git.mehdi.djait.k@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-03-11iio: adc: meson_saradc: Better handle BL30 not releasing the hardwareUwe Kleine-König
meson_sar_adc_lock() might return an error if BL30 doesn't release its lock on the hardware. Just returning early from .remove() is wrong however as this keeps the clocks and regulators on which is never cleaned up later. Given the BL30 not giving up its lock is a strong hint for broken behaviour, and there is nothing we can do about that: Just clean up ignoring the fact that we're not holding the lock. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20230219204439.1641640-1-u.kleine-koenig@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-03-11iio: adc: axp20x_adc: Replace adc_en2 flag with adc_en2_mask fieldAidan MacDonald
The adc_en2 flag is essentially specific to axp20x-compatible devices because it hardcodes register values. Replace it with a mask field so the register value can be specified in device match data. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> Link: https://lore.kernel.org/r/20230217153404.32481-2-aidanmacdonald.0x0@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-03-11iio: adc: axp20x_adc: Minor code cleanupsAidan MacDonald
The code may be clearer if parameters are not re-purposed to hold temporary results like register values, so introduce local variables as necessary to avoid that. Regroup macros based on chip type, and use the FIELD_PREP() macro instead of a hand-rolled version. Suggested-by: Jonathan Cameron <jic23@kernel.org> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> Link: https://lore.kernel.org/r/20230217153404.32481-1-aidanmacdonald.0x0@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-03-03thermal/core: Use the thermal zone 'devdata' accessor in remaining driversDaniel Lezcano
The thermal zone device structure is exposed to the different drivers and obviously they access the internals while that should be restricted to the core thermal code. In order to self-encapsulate the thermal core code, we need to prevent the drivers accessing directly the thermal zone structure and provide accessor functions to deal with. Use the devdata accessor introduced in the previous patch. No functional changes intended. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> #mlxsw Acked-by: Gregory Greenman <gregory.greenman@intel.com> #iwlwifi Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> #power_supply Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> #ahci Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-24Merge tag 'char-misc-6.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver subsystem updates from Greg KH: "Here is the large set of driver changes for char/misc drivers and other smaller driver subsystems that flow through this git tree. Included in here are: - New IIO drivers and features and improvments in that subsystem - New hwtracing drivers and additions to that subsystem - lots of interconnect changes and new drivers as that subsystem seems under very active development recently. This required also merging in the icc subsystem changes through this tree. - FPGA driver updates - counter subsystem and driver updates - MHI driver updates - nvmem driver updates - documentation updates - Other smaller driver updates and fixes, full details in the shortlog All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (223 commits) scripts/tags.sh: fix incompatibility with PCRE2 firmware: coreboot: Remove GOOGLE_COREBOOT_TABLE_ACPI/OF Kconfig entries mei: lower the log level for non-fatal failed messages mei: bus: disallow driver match while dismantling device misc: vmw_balloon: fix memory leak with using debugfs_lookup() nvmem: stm32: fix OPTEE dependency dt-bindings: nvmem: qfprom: add IPQ8074 compatible nvmem: qcom-spmi-sdam: register at device init time nvmem: rave-sp-eeprm: fix kernel-doc bad line warning nvmem: stm32: detect bsec pta presence for STM32MP15x nvmem: stm32: add OP-TEE support for STM32MP13x nvmem: core: use nvmem_add_one_cell() in nvmem_add_cells_from_of() nvmem: core: add nvmem_add_one_cell() nvmem: core: drop the removal of the cells in nvmem_add_cells() nvmem: core: move struct nvmem_cell_info to nvmem-provider.h nvmem: core: add an index parameter to the cell of: property: add #nvmem-cell-cells property of: property: make #.*-cells optional for simple props of: base: add of_parse_phandle_with_optional_args() net: add helper eth_addr_add() ...
2023-02-20Merge tag 'arm-boardfile-remove-6.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC boardfile updates from Arnd Bergmann "Unused boardfile removal for 6.3 This is a follow-up to the deprecation of most of the old-style board files that was merged in linux-6.0, removing them for good. This branch is almost exclusively dead code removal based on those annotations. Some device driver removals went through separate subsystem trees, but the majority is in the same branch, in order to better handle dependencies between the patches and avoid breaking bisection. Unfortunately that leads to merge conflicts against other changes in the subsystem trees, but they should all be trivial to resolve by removing the files. See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the description of which machines were marked unused and are now removed. The only removals that got postponed are Terastation WXL (mv78xx0) and Jornada720 (StrongARM1100), which turned out to still have potential users" * tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits) mmc: omap: drop TPS65010 dependency ARM: pxa: restore mfp-pxa320.h usb: ohci-omap: avoid unused-variable warning ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs ARM: s3c: remove obsolete s3c-cpu-freq header MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal ARM: remove CONFIG_UNUSED_BOARD_FILES mfd: remove htc-pasic3 driver w1: remove ds1wm driver usb: remove ohci-tmio driver fbdev: remove w100fb driver fbdev: remove tmiofb driver mmc: remove tmio_mmc driver mfd: remove ucb1400 support mfd: remove toshiba tmio drivers rtc: remove v3020 driver power: remove pda_power supply driver ASoC: pxa: remove unused board support pcmcia: remove unused pxa/sa1100 drivers ...
2023-02-18iio: adc: ad7791: fix IRQ flagsNuno Sá
The interrupt is triggered on the falling edge rather than being a level low interrupt. Fixes: da4d3d6bb9f6 ("iio: adc: ad-sigma-delta: Allow custom IRQ flags") Signed-off-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230120124645.819910-1-nuno.sa@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-02-06Merge 6.2-rc7 into char-misc-nextGreg Kroah-Hartman
We need the char-misc driver fixes in here as other patches depend on them. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-28iio: adc: ad7291: Fix indentation error by adding extra spacesAnup Sharma
Added extra spaces before statements to fix following indentation warnings reported by checkpatch.pl. WARNING: Statements should start on a tabstop + return 0; Signed-off-by: Anup Sharma <anupnewsmail@gmail.com> Link: https://lore.kernel.org/r/Y9Vf4Tp8JKvy+y0u@yoga Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-28drivers: iio: adc: ltc2497: fix LSB shiftIan Ray
Correct the "sub_lsb" shift for the ltc2497 and drop the sub_lsb element which is now constant. An earlier version of the code shifted by 14 but this was a consequence of reading three bytes into a __be32 buffer and using be32_to_cpu(), so eight extra bits needed to be skipped. Now we use get_unaligned_be24() and thus the additional skip is wrong. Fixes: 2187cfeb3626 ("drivers: iio: adc: ltc2497: LTC2499 support") Signed-off-by: Ian Ray <ian.ray@ge.com> Link: https://lore.kernel.org/r/20230127125714.44608-1-ian.ray@ge.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-28iio: adc: imx93: Fix spelling mistake "geting" -> "getting"Colin Ian King
Thrre is a spelling mistake in a dev_err_probe message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20230124100413.684416-1-colin.i.king@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-28iio: adc: qcom-spmi-adc5: Fix the channel nameAndy Shevchenko
The node name can contain an address part which is unused by the driver. Moreover, this string is propagated into the userspace label, sysfs filenames *and breaking ABI*. Cut the address part out before assigning the channel name. Fixes: 4f47a236a23d ("iio: adc: qcom-spmi-adc5: convert to device properties") Reported-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Link: https://lore.kernel.org/r/20230118100623.42255-1-andriy.shevchenko@linux.intel.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-22iio: adc: add imx93 adc supportHaibo Chen
The ADC in i.mx93 is a total new ADC IP, add a driver to support this ADC. Currently, only support one shot normal conversion triggered by software. For other mode, will add in future. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/r/20230117135137.1735536-2-haibo.chen@nxp.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-21iio: adc: ti-ads7924: add Texas Instruments ADS7924 driverHugo Villeneuve
The Texas Instruments ADS7924 is a 4 channels, 12-bit analog to digital converter (ADC) with an I2C interface. Datasheet: https://www.ti.com/lit/gpn/ads7924 Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20230115170623.3680647-2-hugo@hugovil.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-21iio: adc: xilinx-ams: Convert to use fwnode_device_is_compatible()Andy Shevchenko
Replace open coded fwnode_device_is_compatible() in the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/20230119174749.76769-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-16ARM: s3c: remove s3c24xx specific hacksArnd Bergmann
A number of device drivers reference CONFIG_ARM_S3C24XX_CPUFREQ or similar symbols that are no longer available with the platform gone, though the drivers themselves are still used on newer platforms, so remove these hacks. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-08iio: adc: stm32-dfsdm: add id registers supportOlivier Moysan
Add support of identification registers to STM32 DFSDM to allow hardware capabilities discovery and configuration check. The number of filters and channels, are read from registers, when they are available. Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com> Link: https://lore.kernel.org/r/20230105125331.328275-1-olivier.moysan@foss.st.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-08iio: adc: qcom-spmi-adc5: define ADC5_BAT_ID_100K_PU channelLuca Weiss
Define the ADC channel used for battery identification purposes so it can be used in drivers. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Link: https://lore.kernel.org/r/20230106-pm7250b-bat_id-v1-1-82ca8f2db741@fairphone.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-08iio: adc: max11410: Use asm intead of asm-genericAndy Shevchenko
There is no point to specify asm-generic for the unaligned.h. Drop the 'generic' suffix and move the inclusion to be after the non-IIO linux/* ones. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230103144903.39905-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-08iio: adc: ti-adc128s052: Sort headersAndy Shevchenko
Sort the headers in alphabetic order in order to ease the maintenance for this part. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230102173450.29882-4-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-08iio: adc: ti-adc128s052: Drop anti-pattern of ACPI_PTR() useAndy Shevchenko
ACPI_PTR() is more harmful than helpful. For example, in this case if CONFIG_ACPI=n, the ID table left unused and code is obfuscated by ifdeffery. Drop anti-pattern of ACPI_PTR() use. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230102173450.29882-3-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-08iio: adc: ti-adc128s052: Switch to use spi_get_device_match_data()Andy Shevchenko
The spi_get_device_match_data() helps to get driver data from the firmware node or SPI ID table. Use it instead of open coding. While at it, switch ID tables to provide an acrual pointers to the configuration data. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230102173450.29882-2-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-08iio: adc: ep93xx: Enable wider build testing with COMPILE_TESTJonathan Cameron
It is useful to be able to build this driver without needing to build support for ARCH_EP93XX. Also add an explicit dependency on HAS_IOMEM so we have devm_platform_ioremap_resource() etc available. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Alexander Sverdlin <alexander.sverdlin@gmail.com> Cc: Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Link: https://lore.kernel.org/r/20221231144128.489810-1-jic23@kernel.org
generated by cgit (git 2.34.1) at 2025-06-02 14:21:11 +0000