summaryrefslogtreecommitdiff
path: root/drivers/iio/adc
AgeCommit message (Collapse)Author
2023-10-14iio: exynos-adc: request second interupt only when touchscreen mode is usedMarek Szyprowski
Second interrupt is needed only when touchscreen mode is used, so don't request it unconditionally. This removes the following annoying warning during boot: exynos-adc 14d10000.adc: error -ENXIO: IRQ index 1 not found Fixes: 2bb8ad9b44c5 ("iio: exynos-adc: add experimental touchscreen support") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20231009101412.916922-1-m.szyprowski@samsung.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-13iio: adc: xilinx-xadc: Correct temperature offset/scale for UltraScaleRobert Hancock
The driver was previously using offset and scale values for the temperature sensor readings which were only valid for 7-series devices. Add per-device-type values for offset and scale and set them appropriately for each device type. Note that the values used for the UltraScale family are for UltraScale+ (i.e. the SYSMONE4 primitive) using the internal reference, as that seems to be the most common configuration and the device tree values Xilinx's device tree generator produces don't seem to give us anything to tell us which configuration is used. However, the differences within the UltraScale family seem fairly minor and it's closer than using the 7-series values instead in any case. Fixes: c2b7720a7905 ("iio: xilinx-xadc: Add basic support for Ultrascale System Monitor") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Acked-by: O'Griofa, Conall <conall.ogriofa@amd.com> Tested-by: O'Griofa, Conall <conall.ogriofa@amd.com> Link: https://lore.kernel.org/r/20230915001019.2862964-3-robert.hancock@calian.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-13iio: adc: xilinx-xadc: Don't clobber preset voltage/temperature thresholdsRobert Hancock
In the probe function, the driver was reading out the thresholds already set in the core, which can be configured by the user in the Vivado tools when the FPGA image is built. However, it later clobbered those values with zero or maximum values. In particular, the overtemperature shutdown threshold register was overwritten with the max value, which effectively prevents the FPGA from shutting down when the desired threshold was eached, potentially risking hardware damage in that case. Remove this code to leave the preconfigured default threshold values intact. The code was also disabling all alarms regardless of what enable state they were left in by the FPGA image, including the overtemperature shutdown feature. Leave these bits in their original state so they are not unconditionally disabled. Fixes: bdc8cda1d010 ("iio:adc: Add Xilinx XADC driver") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Acked-by: O'Griofa, Conall <conall.ogriofa@amd.com> Tested-by: O'Griofa, Conall <conall.ogriofa@amd.com> Link: https://lore.kernel.org/r/20230915001019.2862964-2-robert.hancock@calian.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-05iio: adc: ad7192: Correct reference voltageAlisa-Dariana Roman
The avdd and the reference voltage are two different sources but the reference voltage was assigned according to the avdd supply. Add vref regulator structure and set the reference voltage according to the vref supply from the devicetree. In case vref supply is missing, reference voltage is set according to the avdd supply for compatibility with old devicetrees. Fixes: b581f748cce0 ("staging: iio: adc: ad7192: move out of staging") Signed-off-by: Alisa-Dariana Roman <alisa.roman@analog.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230924152149.41884-1-alisadariana@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-05iio: adc: imx8qxp: Fix address for command buffer registersPhilipp Rossak
The ADC Command Buffer Register high and low are currently pointing to the wrong address and makes it impossible to perform correct ADC measurements over all channels. According to the datasheet of the imx8qxp the ADC_CMDL register starts at address 0x100 and the ADC_CMDH register starts at address 0x104. This bug seems to be in the kernel since the introduction of this driver. This can be observed by checking all raw voltages of the adc and they are all nearly identical: cat /sys/bus/iio/devices/iio\:device0/in_voltage*_raw 3498 3494 3491 3491 3489 3490 3490 3490 Fixes: 1e23dcaa1a9fa ("iio: imx8qxp-adc: Add driver support for NXP IMX8QXP ADC") Signed-off-by: Philipp Rossak <embed3d@gmail.com> Acked-by: Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/r/20230904220204.23841-1-embed3d@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-08-13Merge 6.5-rc6 into char-misc-nextGreg Kroah-Hartman
We need the char/misc fixes in here as well to build on top of. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-05iio: adc: men_z188_adc: Remove redundant initialization owner in men_z188_driverLi Zetao
The module_mcb_driver() will set "THIS_MODULE" to driver.owner when register a mcb_driver, so it is redundant initialization to set driver.owner in men_z188_driver statement. Remove it for clean code. Signed-off-by: Li Zetao <lizetao1@huawei.com> Link: https://lore.kernel.org/r/20230804100938.100435-1-lizetao1@huawei.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-29iio: adc: fix the return value handle for platform_get_irq()Ruan Jinjie
There is no possible for platform_get_irq() to return 0 and the return value of platform_get_irq() is more sensible to show the error reason. Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Link: https://lore.kernel.org/r/20230727131607.2897937-1-ruanjinjie@huawei.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-29iio: adc: Remove redundant dev_err_probe()Ruan Jinjie
There is no need to call the dev_err() function directly to print a custom message when handling an error from either the platform_get_irq() or platform_get_irq_byname() functions as both are going to display an appropriate error message in case of a failure. Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20230727073912.4178659-1-ruanjinjie@huawei.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-23iio: adc: Explicitly include correct DT includesRob Herring
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20230714174628.4057920-1-robh@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-22iio: adc: meson: fix core clock enable/disable momentGeorge Stark
Enable core clock at probe stage and disable it at remove stage. Core clock is responsible for turning on/off the entire SoC module so it should be on before the first module register is touched and be off at very last moment. Fixes: 3adbf3427330 ("iio: adc: add a driver for the SAR ADC found in Amlogic Meson SoCs") Signed-off-by: George Stark <gnstark@sberdevices.ru> Link: https://lore.kernel.org/r/20230721102413.255726-2-gnstark@sberdevices.ru Cc: <stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-22iio: adc: meson: init voltage control bitsGeorge Stark
Define and init voltage configuration bits. Those bits are inited in vendor boot code (bl2, bl33) already so do it in the driver to not depend on other code. Introduced bits: REG11[0] - selects Vref. 0 - calibration voltage, 1 - VDDA. txlx and later SoCs support VDDA or calibration voltage as Vref, but others support only calibration voltage. For newer platforms vendor uses VDDA as default. REG11[1] - reserved bit. g12a and later SoCs must write 1, others SoCs write 0. REG11[5] - Vref voltage. 0 - 0.9v, 1 - 1.8v. g12a and later SoCs must write 0, others SoCs write 1. REG11[6] - selects common-mode voltage, 0: from AVDD, 1: from Vref. g12a and later SoCs must write 0, others SoCs write 1. Signed-off-by: George Stark <gnstark@sberdevices.ru> Link: https://lore.kernel.org/r/20230715110654.6035-4-gnstark@sberdevices.ru Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-22iio: adc: meson: init internal continuous ring counterGeorge Stark
Disable internal continuous ring counter at init stage. Disable value depends on SoC family: gxl and later SoCs write 1, others write 0. This bit are inited in vendor boot code (bl2, bl33) already so do it in the driver to not depend on other code. Signed-off-by: George Stark <gnstark@sberdevices.ru> Link: https://lore.kernel.org/r/20230715110654.6035-3-gnstark@sberdevices.ru Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-22iio: adc: meson: init channels 0,1 input muxesGeorge Stark
Set up input channels 0,1 muxes in the same way as for the channels 2-7 later in the code. Signed-off-by: George Stark <gnstark@sberdevices.ru> Link: https://lore.kernel.org/r/20230715110654.6035-2-gnstark@sberdevices.ru Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: adc: meson: support reading from channel 7 mux inputsGeorge Stark
Add IIO channel for all muxed inputs of channel 7. Meson saradc channel 7 is connected to a mux that can switch input to well-known sources like Vdd, GND and several Vdd dividers. Signed-off-by: George Stark <GNStark@sberdevices.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230714114010.293440-7-gnstark@sberdevices.ru Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: adc: meson: add channel labelsGeorge Stark
Add channel labels to provide human-readable names for the inputs. Signed-off-by: George Stark <GNStark@sberdevices.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230714114010.293440-6-gnstark@sberdevices.ru Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: adc: meson: add enum for iio channel numbersGeorge Stark
Channels could be referenced in the driver code and using enum allows to make it more robust. Signed-off-by: George Stark <GNStark@sberdevices.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230714114010.293440-5-gnstark@sberdevices.ru Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: adc: meson: move meson_sar_adc_set_chan7_mux routine upperGeorge Stark
meson_sar_adc_set_chan7_mux is a basic func() for writing single register, defined as static. Moved it up so it could be used in more places. Signed-off-by: George Stark <GNStark@sberdevices.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230714114010.293440-4-gnstark@sberdevices.ru Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: adc: meson: move enums declaration before variables declarationGeorge Stark
Allow to use enum items for variables initialization. For this, move enums upper in the code. Signed-off-by: George Stark <GNStark@sberdevices.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230714114010.293440-3-gnstark@sberdevices.ru Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: adc: meson: remove unused timestamp channelGeorge Stark
Remove IIO_CHAN_SOFT_TIMESTAMP channel because it's used only for buffering mode which is not implemented. Signed-off-by: George Stark <GNStark@sberdevices.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230714114010.293440-2-gnstark@sberdevices.ru Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: adc: ti-lmp92064: add buffering supportLeonard Göhrs
Enable buffered reading of samples from the LMP92064 ADC. The main benefit of this change is being able to read out current and voltage measurements in a single transfer, allowing instantaneous power measurements. Reads into the buffer can be triggered by any software triggers, e.g. the iio-trig-hrtimer: $ mkdir /sys/kernel/config/iio/triggers/hrtimer/my-trigger $ cat /sys/bus/iio/devices/iio\:device3/name lmp92064 $ iio_readdev -t my-trigger -b 16 iio:device3 | hexdump WARNING: High-speed mode not enabled 0000000 0000 0176 0101 0001 5507 abd5 7645 1768 0000010 0000 016d 0101 0001 ee1e ac6b 7645 1768 ... Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230707063635.1496437-1-l.goehrs@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: adc: stm32-adc: Use devm_platform_get_and_ioremap_resource()Yangtao Li
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Yangtao Li <frank.li@vivo.com> Link: https://lore.kernel.org/r/20230704095808.33780-1-frank.li@vivo.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: adc: qcom-spmi-adc5: Add ADC5_GPIO2_100K_PUKonrad Dybcio
Even though it existed in bindings for the longest time, ADC5_GPIO2_100K_PU was never assigned in the driver. Do so. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230627-topic-adc-v1-1-c61581abffa3@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: adc: ad7192: Use sysfs_emit_atAlisa Roman
Replace scnprintf with sysfs_emit_at which is the preferred alternative. Also make sure each fractional digit is in its place by padding with zeros up to 3 digits: "...%03d...". Signed-off-by: Alisa Roman <alisa.roman@analog.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230620163135.93780-1-alisa.roman@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: adc: Add Allwinner D1/T113s/R329/T507 SoCs GPADCMaksim Kiselev
The General Purpose ADC (GPADC) can convert the external signal into a certain proportion of digital value, to realize the measurement of analog signal, which can be applied to power detection and key detection. Theoretically, this ADC can support up to 16 channels. All SoCs below contain this GPADC IP. The only difference between them is the number of available channels: T113 - 1 channel D1 - 2 channels R329 - 4 channels T507 - 4 channels Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com> Link: https://lore.kernel.org/r/20230619154252.3951913-3-bigunclemax@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: adc: Kconfig change description for Allwinner GPADCMaksim Kiselev
This patch adds SoCs names to Allwinner GPADC description to make it more informative. Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com> Link: https://lore.kernel.org/r/20230619154252.3951913-2-bigunclemax@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-15iio: adc: ina2xx: avoid NULL pointer dereference on OF device matchAlvin Šipraga
The affected lines were resulting in a NULL pointer dereference on our platform because the device tree contained the following list of compatible strings: power-sensor@40 { compatible = "ti,ina232", "ti,ina231"; ... }; Since the driver doesn't declare a compatible string "ti,ina232", the OF matching succeeds on "ti,ina231". But the I2C device ID info is populated via the first compatible string, cf. modalias population in of_i2c_get_board_info(). Since there is no "ina232" entry in the legacy I2C device ID table either, the struct i2c_device_id *id pointer in the probe function is NULL. Fix this by using the already populated type variable instead, which points to the proper driver data. Since the name is also wanted, add a generic one to the ina2xx_config table. Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Fixes: c43a102e67db ("iio: ina2xx: add support for TI INA2xx Power Monitors") Link: https://lore.kernel.org/r/20230619141239.2257392-1-alvin@pqrs.dk Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-15iio: adc: ad7192: Fix ac excitation featureAlisa Roman
AC excitation enable feature exposed to user on AD7192, allowing a bit which should be 0 to be set. This feature is specific only to AD7195. AC excitation attribute moved accordingly. In the AD7195 documentation, the AC excitation enable bit is on position 22 in the Configuration register. ACX macro changed to match correct register and bit. Note that the fix tag is for the commit that moved the driver out of staging. Fixes: b581f748cce0 ("staging: iio: adc: ad7192: move out of staging") Signed-off-by: Alisa Roman <alisa.roman@analog.com> Cc: stable@vger.kernel.org Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230614155242.160296-1-alisa.roman@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-15iio: adi: ad7192: Add error check and more debug logMarkus Burri
Print read and expected device ID as debug warning. Add error check for ad_sd_init() result. Reviewed-by: Nuno Sa <nuno.sa@analog.com> Signed-off-by: Markus Burri <markus.burri@mt.com> Link: https://lore.kernel.org/r/20230614073033.2497318-1-markus.burri@mt.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-15iio: adc: ad7192: Simplify using devm_clk_get_optional_enabled()Christophe JAILLET
If st->mclk is not NULL, then st->clock_sel is either AD7192_CLK_EXT_MCLK2 or AD7192_CLK_EXT_MCLK1_2. So devm_clk_get_optional_enabled() can be used instead of hand writing it. This saves some line of code. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/7dbe973905f1fdae5d2f5ae5a3b01dd1d6a9925b.1686774340.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-03Merge tag 'driver-core-6.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here are a small set of changes for 6.5-rc1 for some driver core changes. Included in here are: - device property cleanups to make it easier to write "agnostic" drivers when regards to the firmware layer underneath them (DT vs. ACPI) - debugfs documentation updates - devres additions - sysfs documentation and changes to handle empty directory creation logic better - tiny kernfs optimizations - other tiny changes All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: sysfs: Skip empty folders creation sysfs: Improve readability by following the kernel coding style drivers: fwnode: fix fwnode_irq_get[_byname]() ata: ahci_platform: Make code agnostic to OF/ACPI device property: Implement device_is_compatible() ACPI: Move ACPI_DEVICE_CLASS() to mod_devicetable.h base/node: Use 'property' to identify an access parameter driver core: device.h: add some missing kerneldocs kernfs: fix missing kernfs_idr_lock to remove an ID from the IDR isa: Remove unnecessary checks MAINTAINERS: add entry for auxiliary bus debugfs: Correct the 'debugfs_create_str' docs serial: qcom_geni: Comment use of devm_krealloc rather than devm_krealloc_array iio: adc: Use devm_krealloc_array hwmon: pmbus: Use devm_krealloc_array
2023-07-03Merge tag 'char-misc-6.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull Char/Misc updates from Greg KH: "Here is the big set of char/misc and other driver subsystem updates for 6.5-rc1. Lots of different, tiny, stuff in here, from a range of smaller driver subsystems, including pulls from some substems directly: - IIO driver updates and additions - W1 driver updates and fixes (and a new maintainer!) - FPGA driver updates and fixes - Counter driver updates - Extcon driver updates - Interconnect driver updates - Coresight driver updates - mfd tree tag merge needed for other updates on top of that, lots of small driver updates as patches, including: - static const updates for class structures - nvmem driver updates - pcmcia driver fix - lots of other small driver updates and fixes All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (243 commits) bsr: fix build problem with bsr_class static cleanup comedi: make all 'class' structures const char: xillybus: make xillybus_class a static const structure xilinx_hwicap: make icap_class a static const structure virtio_console: make port class a static const structure ppdev: make ppdev_class a static const structure char: misc: make misc_class a static const structure /dev/mem: make mem_class a static const structure char: lp: make lp_class a static const structure dsp56k: make dsp56k_class a static const structure bsr: make bsr_class a static const structure oradax: make 'cl' a static const structure hwtracing: hisi_ptt: Fix potential sleep in atomic context hwtracing: hisi_ptt: Advertise PERF_PMU_CAP_NO_EXCLUDE for PTT PMU hwtracing: hisi_ptt: Export available filters through sysfs hwtracing: hisi_ptt: Add support for dynamically updating the filter list hwtracing: hisi_ptt: Factor out filter allocation and release operation samples: pfsm: add CC_CAN_LINK dependency misc: fastrpc: check return value of devm_kasprintf() coresight: dummy: Update type of mode parameter in dummy_{sink,source}_enable() ...
2023-07-03Merge tag 'mfd-next-6.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add support for TI TPS6594/TPS6593/LP8764 PMICs - Add support for Samsung RT5033 Battery Charger - Add support for Analog Devices MAX77540 and MAX77541 PMICs New Device Support: - Add support for SPI to Rockchip RK808 (and friends) - Add support for AXP192 PMIC to X-Powers AXP20X - Add support for AXP313a PMIC to X-Powers AXP20X - Add support for RK806 to Rockchip RK8XX Removed Device Support: - Removed MFD support for Richtek RT5033 Battery Fix-ups: - Remove superfluous code - Switch I2C drivers from .probe_new() to .probe() - Convert over to managed resources (devm_*(), etc) - Use dev_err_probe() for returning errors from .probe() - Add lots of Device Tree bindings / support - Improve cache efficiency by switching to Maple - Use own exported namespaces (NS) - Include missing and remove superfluous headers - Start using / convert to the new shutdown sys-off API - Trivial: variable / define renaming - Make use of of_property_read_reg() when requesting DT 'reg's Bug Fixes: - Fix chip revision readout due to incorrect data masking - Amend incorrect register and mask values used for charger state - Hide unused functionality at compile time - Fix resource leaks following error handling routines - Return correct error values and fix error handling in general - Repair incorrect device names - used for device matching - Remedy broken module auto-loading" * tag 'mfd-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (51 commits) dt-bindings: mfd: max77541: Add ADI MAX77541/MAX77540 iio: adc: max77541: Add ADI MAX77541 ADC Support regulator: max77541: Add ADI MAX77541/MAX77540 Regulator Support dt-bindings: regulator: max77541: Add ADI MAX77541/MAX77540 Regulator mfd: Switch two more drivers back to use struct i2c_driver::probe dt-bindings: mfd: samsung,s5m8767: Simplify excluding properties mfd: stmpe: Only disable the regulators if they are enabled mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support dt-bindings: mfd: gateworks-gsc: Remove unnecessary fan-controller nodes mfd: core: Use of_property_read_reg() to parse "reg" mfd: stmfx: Nullify stmfx->vdd in case of error mfd: stmfx: Fix error path in stmfx_chip_init mfd: intel-lpss: Add missing check for platform_get_resource mfd: stpmic1: Add PMIC poweroff via sys-off handler mfd: stpmic1: Fixup main control register and bits naming dt-bindings: mfd: qcom,tcsr: Add the compatible for IPQ8074 mfd: tps65219: Add support for soft shutdown via sys-off API mfd: pm8008: Drop bogus i2c module alias mfd: pm8008: Fix module autoloading mfd: tps65219: Add GPIO cell instance ...
2023-06-28iio: adc: max77541: Add ADI MAX77541 ADC SupportOkan Sahin
The MAX77541 has an 8-bit Successive Approximation Register (SAR) ADC with four multiplexers for supporting the telemetry feature. Signed-off-by: Okan Sahin <okan.sahin@analog.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230412111256.40013-4-okan.sahin@analog.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-06-15Merge tag 'iio-for-6.5a' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: 1st set of IIO new device support, features and cleanup for the 6.5 cycle. New device support - honeywell,mprls0025pa * New driver and dt-bindings for this series of pressure sensors. - invensense,mpu6050 * Add support for ICM 20600 IMU (ID, bindings and device data). - melexis,mlx90614 * Add support for mlx90615 Infra Red Thermometer after driver cleanup and refactoring to support the differences in this device. - renesas,x9250 * New driver and bindings for this quad potentiometer. - rockchip,saradc * Add support for RK3588. Also included is a bunch of refactoring and cleanup for that driver. - rohm,bu27008 * New driver bindings etc for this 5 photodiode color sensor. - st,lsm9ds0/st,st-sensors * ID added for LSM303D accelerometer and magnetometer including ACPI binding. - ti,opt4001 * New driver and bindings for this ambient light sensor. Features - core * Introduce iio_validate_own_trigger() for cases where a driver can only consumer a trigger it registered (detected via same parent device). Use it in the kionix,kx022a driver and new rohm,by27008 driver. - dynaimage,al3320a * ACPI binding CALS0001 seen on Lenovo Yoga Table 2 devices. - kionix,kx002a * Enable asynchronous probe. - rohm,bu27034 * Enable asynchronous probe. - ti,tmp006 * Explicit support for DT including binding documentation. Cleanups, minor fixes and misc improvements. - treewide * Switch I2C drivers from probe_new() back to probe() - part of the long process of getting rid of a parameter from probe() * Various whitespace and typo fixes not otherwise called out. - core * industrialio-buffer,Style cleanup. * Add documentation to extend_name field of struct iio_chan_spec to direct people using it towards the label infrastructure instead. extend_name was a design mistake a long time back so directly people away from it may be useful. - adi,ad7606 * Add HAS_IOPORT dependency to prepare for some Kconfig changes. - bosch,bma400 * Drop pointless print of ret in a dev_err_probe() message. - invensense,icm42600 * Rework timestamp handling to reduce jitter. - mediatek,mt7986-auxdac * Add DT binding for this part. - qcom,spmi-vadc * Allow for 1/16th prescaling used on a few devices. * Various changes to channel labeling and naming, including dropping use of fwnode_name which generates odd channel names. Small ABI change as a result, but not thought to be a problem for users of this platform. - st,lsm6dsx * dt-binding: Use common schema for mount-matrix via a reference. - st,stm32 * Add a debug print for when legacy channel config is used. - ti,palmas-adc * Drop unused i2c.h include. * tag 'iio-for-6.5a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (59 commits) dt-bindings: iio: rockchip: Fix 'oneOf' condition failed warning dt-bindings: iio: afe: voltage-divider: Spelling s/curcuit/circuit/ dt-bindings: iio: adc: Add rockchip,rk3588-saradc string iio: adc: rockchip_saradc: Use dev_err_probe iio: adc: rockchip_saradc: Match alignment with open parenthesis iio: adc: rockchip_saradc: Use of_device_get_match_data iio: adc: rockchip_saradc: Make use of devm_clk_get_enabled iio: adc: rockchip_saradc: Add support for RK3588 iio: adc: rockchip_saradc: Add callback functions iio: temperature: tmp006: Add OF device matching support dt-bindings: iio: temperature: Add support for tmp006 staging: iio: Switch i2c drivers back to use .probe() iio: amplifiers: ad8366 Fix whitespace issue iio: imu: inv_icm42600: avoid frequent timestamp jitter MAINTAINERS: Add ROHM BU27008 iio: light: ROHM BU27008 color sensor iio: kx022a: Use new iio_validate_own_trigger() iio: trigger: Add simple trigger_validation helper dt-bindings: iio: light: ROHM BU27008 iio: mlx90614: Add MLX90615 support ...
2023-06-10meson saradc: fix clock divider mask lengthGeorge Stark
According to the datasheets of supported meson SoCs length of ADC_CLK_DIV field is 6-bit. Although all supported SoCs have the register with that field documented later SoCs use external clock rather than ADC internal clock so this patch affects only meson8 family (S8* SoCs). Fixes: 3adbf3427330 ("iio: adc: add a driver for the SAR ADC found in Amlogic Meson SoCs") Signed-off-by: George Stark <GNStark@sberdevices.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20230606165357.42417-1-gnstark@sberdevices.ru Cc: <stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-06-05Merge 6.4-rc5 into driver-core-nextGreg Kroah-Hartman
We need the driver core fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-04iio: adc: ad7192: Fix internal/external clock selectionFabrizio Lamarque
Fix wrong selection of internal clock when mclk is defined. Resolve a logical inversion introduced in c9ec2cb328e3. Fixes: c9ec2cb328e3 ("iio: adc: ad7192: use devm_clk_get_optional() for mclk") Signed-off-by: Fabrizio Lamarque <fl.scratchpad@gmail.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230530075311.400686-3-fl.scratchpad@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-06-04iio: adc: ad7192: Fix null ad7192_state pointer accessFabrizio Lamarque
Pointer to indio_dev structure is obtained via spi_get_drvdata() at the beginning of function ad7192_setup(), but the spi->dev->driver_data member is not initialized, hence a NULL pointer is returned. Fix by changing ad7192_setup() signature to take pointer to struct iio_dev, and get ad7192_state pointer via st = iio_priv(indio_dev); Fixes: bd5dcdeb3fd0 ("iio: adc: ad7192: convert to device-managed functions") Signed-off-by: Fabrizio Lamarque <fl.scratchpad@gmail.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230530075311.400686-2-fl.scratchpad@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-06-04iio: adc: rockchip_saradc: Use dev_err_probeShreeya Patel
Use dev_err_probe instead of dev_err in probe function, which simplifies code a little bit and prints the error code. Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20230603185340.13838-7-shreeya.patel@collabora.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-06-04iio: adc: rockchip_saradc: Match alignment with open parenthesisShreeya Patel
Match alignment with open parenthesis for improving the code readability. Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230603185340.13838-6-shreeya.patel@collabora.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-06-04iio: adc: rockchip_saradc: Use of_device_get_match_dataShreeya Patel
Use of_device_get_match_data() to simplify the code. Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20230603185340.13838-5-shreeya.patel@collabora.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-06-04iio: adc: rockchip_saradc: Make use of devm_clk_get_enabledShreeya Patel
Use devm_clk_get_enabled() to avoid manually disabling the clock. Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20230603185340.13838-4-shreeya.patel@collabora.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-06-04iio: adc: rockchip_saradc: Add support for RK3588Simon Xue
Add new start and read functions to support rk3588 device. Also, add a device compatible string for the same. Signed-off-by: Simon Xue <xxm@rock-chips.com> Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230603185340.13838-3-shreeya.patel@collabora.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-06-04iio: adc: rockchip_saradc: Add callback functionsSimon Xue
Add start, read and power_down callback functions, which will help in adding new rockchip device support cleanly. Signed-off-by: Simon Xue <xxm@rock-chips.com> Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20230603185340.13838-2-shreeya.patel@collabora.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-30iio: adc: Use devm_krealloc_arrayJames Clark
Now that it exists, use it instead of doing the multiplication and checking for overflow manually. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: James Clark <james.clark@arm.com> Link: https://lore.kernel.org/r/20230509094942.396150-4-james.clark@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-21iio: Switch i2c drivers back to use .probe()Uwe Kleine-König
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230515205048.19561-1-u.kleine-koenig@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-20iio: ad7606: Kconfig: add HAS_IOPORT dependenciesNiklas Schnelle
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends not being declared. We thus need to add HAS_IOPORT as dependency for those drivers using them. Co-developed-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Link: https://lore.kernel.org/r/20230516110038.2413224-13-schnelle@linux.ibm.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-20iio: adc: ad_sigma_delta: Fix IRQ issue by setting IRQ_DISABLE_UNLAZY flagMasahiro Honda
The Sigma-Delta ADCs supported by this driver can use SDO as an interrupt line to indicate the completion of a conversion. However, some devices cannot properly detect the completion of a conversion by an interrupt. This is for the reason mentioned in the following commit. commit e9849777d0e2 ("genirq: Add flag to force mask in disable_irq[_nosync]()") A read operation is performed by an extra interrupt before the completion of a conversion. At this time, the value read from the ADC data register is the same as the previous conversion result. This patch fixes the issue by setting IRQ_DISABLE_UNLAZY flag. Fixes: 0c6ef985a1fd ("iio: adc: ad7791: fix IRQ flags") Fixes: 1a913270e57a ("iio: adc: ad7793: Fix IRQ flag") Fixes: e081102f3077 ("iio: adc: ad7780: Fix IRQ flag") Fixes: 89a86da5cb8e ("iio: adc: ad7192: Add IRQ flag") Fixes: 79ef91493f54 ("iio: adc: ad7124: Set IRQ type to falling") Signed-off-by: Masahiro Honda <honda@mechatrax.com> Link: https://lore.kernel.org/r/20230518110816.248-1-honda@mechatrax.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13iio: adc: qcom-spmi-vadc: Propagate fw node label to userspaceMarijn Suijten
Set the read_label() callback to return a friendly name provided in DT (firmware), in order to make in_{therm,voltage}X_label attributes show up in sysfs for userspace to consume a channel name. This is particularly useful for custom thermistors being attached to otherwise generically named GPIOs, where the name is known by the board DT. If the channel name isn't set in DT, use the datasheet_name hardcoded in the driver instead. Note that this doesn't fall back to fwnode_get_name() as that provides suboptimally readable names, with an @xx address suffix from board DT. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230502-iio-adc-propagate-fw-node-label-v3-5-6be5db6e6b5a@somainline.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
generated by cgit (git 2.34.1) at 2025-07-24 06:59:22 +0000