summaryrefslogtreecommitdiff
path: root/drivers/iio/dac
AgeCommit message (Collapse)Author
2017-04-02iio: dac: ad5504: Remove unnecessary cast on void pointersimran singhal
The following Coccinelle script was used to detect this: @r@ expression x; void* e; type T; identifier f; @@ ( *((T *)e) | ((T *)x)[...] | ((T*)x)->f | - (T*) e ) Signed-off-by: simran singhal <singhalsimran0@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-03-29iio: dac: ad5504: constify attribute_group structuressimran singhal
Check for attribute_group structures that are only stored in the event_attrs filed of iio_info structure. As the event_attrs field of iio_info structures is constant, so these attribute_group structures can also be declared constant. Done using coccinelle: @r1 disable optional_qualifier @ identifier i; position p; @@ static struct attribute_group i@p = {...}; @ok1@ identifier r1.i; position p; struct iio_info x; @@ x.event_attrs=&i@p; @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ static +const struct attribute_group i={...}; @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct attribute_group i; File size before: text data bss dec hex filename 3046 360 0 3406 d4e drivers/iio/dac/ad5504.o File size after: text data bss dec hex filename 3110 296 0 3406 d4e drivers/iio/dac/ad5504.o Signed-off-by: simran singhal <singhalsimran0@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-03-21iio: dac: Add support for ltc2632 DACsMaxime Roussin-Belanger
Add support for Linear Technology LTC2632 (SPI) family of· dual 12- 10-, and 8-bits output DACs. Signed-off-by: Maxime Roussin-Belanger <maxime.roussinbelanger@gmail.com> Signed-off-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-03-19iio: dac: max5821: Set .of_match_table to OF device ID tableJavier Martinez Canillas
The driver has a OF device ID table but the struct i2c_driver .of_match_table field is not set. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-03-19iio: dac: mcp4725: Add OF device ID tableJavier Martinez Canillas
The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-02-19iio: cio-dac: Set parent deviceLars-Peter Clausen
Initialize the parent of the IIO device to the device that registered it. This makes sure that the IIO device appears the right level in the device hierarchy. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-12-30iio: dac: ad5593r: Add ACPI supportMichael Hennerich
This patch adds the ACPI/PNP ID. The AD5592/3 driver core is already designed around the unified device property API. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-12-30iio: dac: ad5592r: Add ACPI supportMichael Hennerich
This patch adds the ACPI/PNP ID. The AD5592/3 driver core is already designed around the unified device property API. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-11-13iio: dpot-dac: DAC driver based on a digital potentiometerPeter Rosin
It is assumed that the dpot is used as a voltage divider between the current dpot wiper setting and the maximum resistance of the dpot. The divided voltage is provided by a vref regulator. .------. .-----------. | | | vref |--' .---. | regulator |--. | | '-----------' | | d | | | p | | | o | wiper | | t |<---------+ | | | | '---' dac output voltage | | '------+------------+ Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-10-23iio: dac: mcp4725: fix odd_ptr_err.cocci warningsJulia Lawall
PTR_ERR should access the value just tested by IS_ERR Generated by: scripts/coccinelle/tests/odd_ptr_err.cocci CC: Tomas Novotny <tomas@novotny.cz> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-10-23iio: dac: mcp4725: add devicetree supportTomas Novotny
Signed-off-by: Tomas Novotny <tomas@novotny.cz> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-10-23iio: dac: mcp4725: support voltage reference selectionTomas Novotny
MCP47x6 chip supports selection of a voltage reference (VDD, VREF buffered or unbuffered). MCP4725 doesn't have this feature thus the eventual setting is ignored and user is warned. The setting is stored only in the volatile memory of the chip. You need to manually store it to the EEPROM of the chip via 'store_eeprom' sysfs entry. Signed-off-by: Tomas Novotny <tomas@novotny.cz> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-10-23iio: dac: mcp4725: fix incorrect commentTomas Novotny
Number 2 is referencing to the settings with the largest available resistor. No functional change. Signed-off-by: Tomas Novotny <tomas@novotny.cz> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-10-23iio: dac: mcp4725: use regulator frameworkTomas Novotny
Use a standard framework to get the reference voltage. It is done that way in the iio subsystem and it will simplify extending of the driver. Structure mcp4725_platform_data is left undeleted because it used in the next patch. This change breaks the current users of the driver, but there is no mainline user of struct mcp4725_platform_data. Signed-off-by: Tomas Novotny <tomas@novotny.cz> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-27drivers: iio: dac: Fix sparse warningSandhya Bankar
Fixing below warnings: drivers/iio/dac/ad5592r.c:58:41: warning: incorrect type in argument 2 (different base types) drivers/iio/dac/ad5592r.c:58:41: expected unsigned short [usertype] *buf drivers/iio/dac/ad5592r.c:58:41: got restricted __be16 *<noident> drivers/iio/dac/ad5592r.c:62:41: warning: incorrect type in argument 2 (different base types) drivers/iio/dac/ad5592r.c:62:41: expected unsigned short [usertype] *buf drivers/iio/dac/ad5592r.c:62:41: got restricted __be16 *<noident> drivers/iio/dac/ad5592r.c:92:41: warning: incorrect type in argument 2 (different base types) drivers/iio/dac/ad5592r.c:92:41: expected unsigned short [usertype] *buf drivers/iio/dac/ad5592r.c:92:41: got restricted __be16 *<noident> drivers/iio/dac/ad5592r.c:110:41: warning: incorrect type in argument 2 (different base types) drivers/iio/dac/ad5592r.c:110:41: expected unsigned short [usertype] *buf drivers/iio/dac/ad5592r.c:110:41: got restricted __be16 *<noident> Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-03iio: stx104: Add IIO support for the ADC channelsWilliam Breathitt Gray
The Apex Embedded Systems STX104 features 16 channels of single-ended (8 channels of true differential) 16-bit analog input. Differential input configuration may be selected via a physical jumper on the device. Similarly, input polarity (unipolar/bipolar) is configured via a physical jumper on the device. Input gain selection is available to the user via software, thus allowing eight possible input ranges: +-10V, +-5V, +-2.5V, +-1.25V, 0 to 10V, 0 to 5V, 0 to 2.5V, and 0 to 1.25V. Four input gain configurations are supported: x1, x2, x4, and x8. This ADC resolution is 16-bits (1/65536 of full scale). Analog input samples are taken on software trigger; neither FIFO sampling nor interrupt triggering is supported by this driver. The Apex Embedded Systems STX104 is primarily an analog-to-digital converter device. The STX104 IIO driver was initially placed in the DAC directory because only the DAC portion of the STX104 was supported at the time. Now that ADC support has been added to the STX104 IIO driver, the driver should be moved to the more appropriate ADC directory. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-08-29iio: dac: AD8801: add Analog Devices AD8801/AD8803 supportGwenhael Goavec-Merou
Add support for Analog Devices AD8801/AD8803, 8 channels 8bits, Digital to Analog converters. Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-08-29iio: ad5755: fix off-by-one on devnr limit checkColin Ian King
The comparison for devnr limits is off-by-one, the current check allows 0 to AD5755_NUM_CHANNELS and the limit should be in fact 0 to AD5755_NUM_CHANNELS - 1. This can lead to an out of bounds write to pdata->dac[devnr]. Fix this by replacing > with >= on the comparison. Signed-off-by: Colin Ian King <colin.king@canonical.com> Fixes: c947459979c6 ("iio: ad5755: add support for dt bindings") Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-07-24iio: Add IIO support for the Measurement Computing CIO-DAC familyWilliam Breathitt Gray
The Measurement Computing CIO-DAC is a family of 16-bit and 12-bit analog output devices. The analog outputs are from AD660BN/AD7237 converters with each output buffered by an OP-27. Voltage ranges are configured via physical jumpers on the device. This driver does not support the devices' simulataneous update mode; the XFER jumper option should be deselected for all analog output channels. This driver provides IIO support for the Measurement Computing CIO-DAC family: CIO-DAC16, CIO-DAC08, and PC104-DAC06. The base port addresses for the devices may be configured via the base array module parameter. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-06-30iio:core: timestamping clock selection supportGregor Boirie
Adds a new per-device sysfs attribute "current_timestamp_clock" to allow userspace to select a particular POSIX clock for buffered samples and events timestamping. Following clocks, as listed in clock_gettime(2), are supported: CLOCK_REALTIME, CLOCK_MONOTONIC, CLOCK_MONOTONIC_RAW, CLOCK_REALTIME_COARSE, CLOCK_MONOTONIC_COARSE, CLOCK_BOOTTIME and CLOCK_TAI. Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com> Acked-by: Sanchayan Maity <maitysanchayan@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-06-29Merge tag 'iio-for-4.8b' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second round of new iio device support, features and cleanups in the 4.8 cycle Firstly some contact detail updates: * NXP took over freescale. Update the mma8452 header to reflect this. * Martin Kepplinger email address change in mma8452 header. * Adriana Reus has changed email address. Update .mailmap. * Matt Ranostay has changed email address. Update .mailmap. New Device Support * max1363 - add the missing i2c_device_ids for a couple of parts so they can actually be used. * ms5867 - add device ids for ms5805 and ms5837 parts. New Features * ad5755 - DT support. This one was a bit controversial and under review for a long time. Still no one could come up with a better solution. * stx104 - add gpio support * ti-adc081c - Add ACPI device ID matching. Core changes * Refuse to register triggers with duplicate names. There is no way to distinguish between them so this makes no sense. A few drivers do not generate unique names for each instance of the device present. We can't fix this without changing ABI so leave them and wait for someone to actually take the rare step of two identical accelerometers on the same board. * buffer-dma - use ARRAY_SIZE in a few appropriate locations. Tools * Fix the fact that the --trigger-num option in generic_buffer didn't allow 0 which is perfectly valid in the ABI. Cleanups * as3935 - improve error reporting. - remove redundant zeroing of a field in iio_priv. * gp2ap020a00f - use the iio_device_claim_*_mode helpers rather than open coding locking around mode changes. * isl29125 - use the iio_device_claim_*_mode helpers rather than open coding locking. * lidar - use the iio_device_claim_*_mode helpers rather than open coding locking. * mma8452 - more detail in devices supported description in comments (addresses and similar) * sca3000 - add a missing error check. * tcs3414 - use the iio_device_claim_*_mode helpers rather than open coding locking. * tcs3472 - use the iio_device_claim_*_mode helpers rather than open coding locking.
2016-06-27iio: ad5755: add support for dt bindingsSean Nyekjaer
Devicetree can provide platform data Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-06-27iio: stx104: Add GPIO support for the Apex Embedded Systems STX104William Breathitt Gray
The Apex Embedded Systems STX104 device features eight lines of digital I/O (four digital inputs and four digital outputs). This patch adds GPIO support for these eight lines of digital I/O via GPIOLIB. Cc: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-06-18Merge tag 'staging-4.7-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull IIO and staging fixes from Greg KH: "Here are a number of IIO and staging bugfixes for 4.7-rc4. Nothing huge, the normal amount of iio driver fixes, and some small staging driver bugfixes for some reported problems (2 are reverts of patches that went into 4.7-rc1). All have been in linux-next with no reported issues" * tag 'staging-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (24 commits) Revert "Staging: rtl8188eu: rtw_efuse: Use sizeof type *pointer instead of sizeof type." Revert "Staging: drivers: rtl8188eu: use sizeof(*ptr) instead of sizeof(struct)" staging: lustre: lnet: Don't access NULL NI on failure path iio: hudmidity: hdc100x: fix incorrect shifting and scaling iio: light apds9960: Add the missing dev.parent iio: Fix error handling in iio_trigger_attach_poll_func iio: st_sensors: Disable DRDY at init time iio: st_sensors: Init trigger before irq request iio: st_sensors: switch to a threaded interrupt iio: light: bh1780: assign a static name iio: bh1780: dereference the client properly iio: humidity: hdc100x: fix IIO_TEMP channel reporting iio:st_pressure: fix sampling gains (bring inline with ABI) iio: proximity: as3935: fix buffer stack trashing iio: proximity: as3935: remove triggered buffer processing iio: proximity: as3935: correct IIO_CHAN_INFO_RAW output max44000: Remove scale from proximity iio: humidity: am2315: Remove a stray unlock iio: humidity: hdc100x: correct humidity integration time mask iio: pressure: bmp280: fix error message for wrong chip id ...
2016-06-17iio: stx104: Allow build for X86_64William Breathitt Gray
With the introduction of the ISA_BUS_API Kconfig option, ISA-style drivers may be built for X86_64 architectures. This patch changes the ISA Kconfig option dependency of the Apex Embedded Systems STX104 DAC driver to ISA_BUS_API, thus allowing it to build for X86_64 as it is expected to. Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-07Merge tag 'iio-fixes-for-4.7a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First round of iio fixes for the 4.7 cycle. A slightly bumper set due to travel delaying the pull request and a fair few issues with the recent merge window patches. Patches all over the place. The st-sensors one is probably the most involved, but definitly solves the issues seen. Note there are some other issues around that handler (and the fact that a lot of boards tie a level interrupt chip to an edge interrupt only irq chip). These are not regressions however, so will turn up the slow route. * core - iio_trigger_attach_pollfunc had some really badly wrong error handling. Another nasty triggered whilst chasing down issues with the st sensors rework below. * ad5592r - fix an off by one error when allocating channels. * am2315 - a stray mutex unlock before we ever take the lock. * apds9960 - missing a parent in the driver model (which should be the i2c device). Result is it doesn't turn up under /sys/bus/i2c/devices which some userspace code uses for repeatable device identification. * as3935 - ABI usage bug which meant a processed value was reported as raw. Now reporting scale as well to ensure userspace has the info it needs. - Don't return processed value via the buffer - it doesn't conform to the ABI and will overflow in some cases. - Fix a wrongly sized buffer which would overflow trashing part of the stack. Also move it onto the heap as part of the fix. * bh1780 - a missing return after write in debugfs lead to an incorrect read and a null pointer dereference. - dereferencing the wrong pointer in suspend and resume leading to unpredictable results. - assign a static name to avoid accidentally ending up with no name if loaded via device tree. * bmi160 - output data rate for the accelerometer was incorrectly reported. Fix it. - writing the output data rate was also wrong due to reverse parameters. * bmp280 - error message for wrong chip ID gave the wrong expected value. * hdc100x - mask for writing the integration time was wrong allowin g us to get 'stuck' in a particular value with no way back. - temperature reported in celsius rather than millicelsius as per the ABI. - Get rid of some incorrect data shifting which lead to readings being rather incorrect. * max44000 - drop scale attribute for proximity as it is an unscaled value (depends on what is in range rather than anything knowable at the detector). * st-pressure - ABI compliance fixes - units were wrong. * st-sensors - We introduced some nasty issues with the recent switch over to a a somewhat threaded handler in that we broke using a software trigger with these devices. Now do it properly. It's a larger patch than ideal for a fix, but the logic is straight forward. - Make sure the trigger is initialized before requesting the interrupt. This matters now the interrupt can be shared. Before it was ugly and wrong but short of flakey hardware could not be triggered. - Hammer down the dataready pin at boot - otherwise with really unlucky timing things could get interestingly wedged requiring a hard power down of the chip.
2016-05-20Merge tag 'staging-4.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO driver updates from Greg KH: "Here's the big staging and iio driver update for 4.7-rc1. I think we almost broke even with this release, only adding a few more lines than we removed, which isn't bad overall given that there's a bunch of new iio drivers added. The Lustre developers seem to have woken up from their sleep and have been doing a great job in cleaning up the code and pruning unused or old cruft, the filesystem is almost readable :) Other than that, just a lot of basic coding style cleanups in the churn. All have been in linux-next for a while with no reported issues" * tag 'staging-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (938 commits) Staging: emxx_udc: emxx_udc: fixed coding style issue staging/gdm724x: fix "alignment should match open parenthesis" issues staging/gdm724x: Fix avoid CamelCase staging: unisys: rename misleading var ii with frag staging: unisys: visorhba: switch success handling to error handling staging: unisys: visorhba: main path needs to flow down the left margin staging: unisys: visorinput: handle_locking_key() simplifications staging: unisys: visorhba: fail gracefully for thread creation failures staging: unisys: visornic: comment restructuring and removing bad diction staging: unisys: fix format string %Lx to %llx for u64 staging: unisys: remove unused struct members staging: unisys: visorchannel: correct variable misspelling staging: unisys: visorhba: replace functionlike macro with function staging: dgnc: Need to check for NULL of ch staging: dgnc: remove redundant condition check staging: dgnc: fix 'line over 80 characters' staging: dgnc: clean up the dgnc_get_modem_info() staging: lustre: lnet: enable configuration per NI interface staging: lustre: o2iblnd: properly set ibr_why staging: lustre: o2iblnd: remove last of kiblnd_tunables_fini ...
2016-05-04iio: dac: ad5592r: Off by one bug in ad5592r_alloc_channels()Dan Carpenter
The > here should be >= or we go beyond the end for the array. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-02iio: stx104: Utilize the module_isa_driver and max_num_isa_dev macrosWilliam Breathitt Gray
The Apex Embedded Systems STX104 DAC drivers does not do anything special in module init/exit. This patch eliminates the module init/exit boilerplate code by utilizing the module_isa_driver macro. Additionally, the max_num_isa_dev macro is utilized to simplify the determination of maximum possible STX104 devices in the system. Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-02iio: stx104: Add X86 dependency to STX104 Kconfig optionWilliam Breathitt Gray
The Apex Embedded Systems STX104 DAC driver expects the STX104 device to be I/O port-mapped addressable on an X86 platform. This patch adds an explicit X86 dependency to the STX104 configuration option to prevent building on non-X86 architectures. Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-10iio: dac: Add support for the AD5592R/AD5593R ADCs/DACsPaul Cercueil
This patch adds support for the AD5592R (spi) and AD5593R (i2c) ADC/DAC/GPIO devices. Signed-off-by: Paul Cercueil <paul.cercueil@analog.com> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-03-12iio: dac: add NXP LPC18xx DAC driverJoachim Eastwood
Add base support for the 10-bit DAC peripheral found on NXP LPC18xx/43xx SoCs. This is a minimal driver that does not support DMA or interrupts. User manual with register description can be found on: LPC18xx: www.nxp.com/documents/user_manual/UM10430.pdf LPC43xx: www.nxp.com/documents/user_manual/UM10503.pdf Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-24iio: dac: vf610_dac: Add IIO DAC driver for Vybrid SoCSanchayan Maity
Add driver support for DAC peripheral on Vybrid SoC. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-14Merge tag 'iio-for-4.6b' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: 2nd round of new IIO device support, features and cleanups for the 4.6 cycle. New Device Support * Apex stx104 DAC - new driver for this PC104 board. Right now DAC support only. * ADI ad5064 - Add support for ad5625, ad5627, ad5645, ad5665, ad5667 DACs. - Add support for Linear Technology ltc2606, ltc2607, ltc2609, ltc2616, ltc2617, ltc2619, ltc2626, ltc2627 and ltc2629. * ADI ad7192 - add support for the ad7193 * Invensense mpu6050 - substantial rework of driver to use regmap allowing SPI support extending the now split driver to cover the MPU6000. * TI adc0832 - new driver supporting ADC0831, ADC0832, ADC0834 and ADC0838 ADCs. * TI ads1015 - new driver, note that there is an existing hwmon driver. The long term intention is to probably remove the hwmon driver but for now we just have guards in place to ensure this driver is not built if that one is enabled. * TI afe4403 - new driver for this heart rate monitor / pulse oximeter front end chip. * TI afe4404 - new driver for this heart rate monitor / pulse oximeter front end chip. Staging Graduations * mxs-lradc - A combined general purpose and touch screen (input) device driver. Originally held in staging to allow reworking into and MFD but as that wasn't happening and isn't an absolute requirement we are moving it out of staging. Driver new features * ms5611 - triggered buffer support - IIO_CHAN_INFO_SCALE to aid the triggered buffer support. Driver cleanups / reworks / fixes * ad5064 - Use an enum for the register map layout to allow support of additional chips (precursor to the new support listed above). - Structural driver changes to allow support of the slightly different handling for the ltc parts above. * ad5933 - drop an exceptional & unnecessary for a function pointer. * ad7606 - Cleanup the repeated copies of pm ops. - consolidate the various channels specs via a sport of rearranging so only one version is needed. * atlas ph sensor - add select IRQ_WORK * hmc8543 (soon to move out of staging) - Comment style fixes - functionality of suspend and resume was swapped. * spear-adc - use devm_clk_dev instead of managing the clk lifetime by hand. Core * Use new dmaengine_terminate_sync call to avoid a theoretical race. * Fix docs for mlock in struct iio_dev as it is correctly taken in some drivers (docs used to say for core only). * Add a helper function for calculating the scan index storage size within the core cutting out some cut and paste versions of the same code.
2016-02-13iio: Add IIO support for the DAC on the Apex Embedded Systems STX104William Breathitt Gray
The Apex Embedded Systems STX104 is a 16-channel 16-bit analog input and 2-channel 16-bit analog output PC/104 card. The STX104 incorporates a large one mega-sample FIFO. This driver provides IIO support for the 2-channel DAC on the STX104. The base port addresses for the devices may be configured via the "base" module parameter array. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-08iio:ad5064: Add AD5625/AD5627/AD5645/AD5647/AD4665/AD5657 supportLars-Peter Clausen
The AD5625/AD5645/AD5665 are a family of 4 channel DACs with 12-bit, 14-bit and 16-bit precision respectively. The devices come in 3 flavors in terms of built-in reference, either no built-in reference, built-in 1.25V reference or built-in 2.5V reference. The AD5627/AD5647/AD5667 are similar to the AD5625/AD5645/AD5665 except that they have 2 instead of 4 channels. While these new devices are mostly register map compatible with the existing devices support by the driver some offsets and register addresses have been shuffled around. To accommodate this introduce a new register map layout. For the lack of a better name we will just call it version 2. Datasheets: http://www.analog.com/media/en/technical-documentation/data-sheets/AD5625R_5645R_5665R_5625_5665.pdf http://www.analog.com/media/en/technical-documentation/data-sheets/AD5627R_5647R_5667R_5627_5667.pdf Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-08iio:ad5064: Use a enum for the register map layout typeLars-Peter Clausen
Currently the ad5064 only supports two different register map variations and this is represented by a bool. This patch changes since to a enum so we can support more variations in the future. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-08iio:ad5064: List support LTC devices in KconfigLars-Peter Clausen
List the newly support LTC devices in the Kconfig entry for the AD5064 driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-08iio:ad5064: Add support for ltc2617 and similar devicesMarc Andre
The Linear Technology LTC2606, LTC2607, LTC2609, LTC2616, LTC2617, LTC2619, LTC2626, LTC2627 and LTC2629 devices are very similar to the AD5064 device. This patch adds support for those devices. Datasheet for LTC devices: LTC2606, LTC2616, LTC2626: http://www.linear.com/docs/6398 LTC2607, LTC2617, LTC2627: http://www.linear.com/docs/8977 LTC2709, LTC2619, LTC2629: http://www.linear.com/docs/8477 Signed-off-by: Marc Andre <marc.andre@netline.ch> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-08iio:ad5064: Structural changes to support LTC2617Marc Andre
This patch makes minor structural changes to support specifics for LTC2617 DAC. This DAC requires different handling of the power down modes. The configuration to actually support the DAC will be submitted in a secondary patch. Adjust the DECLARE_AD5064_CHANNELS() macro to accept a new ext_info parameter. This allows to use different power down modes per DAC. (e.g. DAC only support 90kohm to ground) Add the chip_info parameter "powerdown_ltc". This parameter is used in the ad5064_sync_powerdown_mode() function to handle the power down command for LTC diffently. For those devices the power down command must be addressed to the channel. Signed-off-by: Marc Andre <marc.andre@netline.ch> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-07Merge 4.5-rc3 into staging-nextGreg Kroah-Hartman
We want the upstream staging fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-24iio: add ad5761 DAC driverRicardo Ribalda Delgado
ad5761 is a 1-channel DAC with configurable output range. The driver uses the regulator interface for its voltage ref. It shares its register layout with ad5761r, ad5721 and ad5721r. Differences: ad5761* are 16 bit, ad5721* are 12 bits. ad57*1r have an internal reference. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-09iio: dac: mcp4725: set iio name property in sysfsYong Li
Without this change, the name entity for mcp4725 is missing in /sys/bus/iio/devices/iio\:device*/name With this change, name is reported correctly Signed-off-by: Yong Li <sdliyong@gmail.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-03iio: dac: mcp4725: Add basic support for MCP4726Akinobu Mita
MCP4726 is a single channel 12-bit DAC. We can support MCP4726 with a little changes to mcp4725 driver. In power-down mode, they have different selection of VOUT pull-down registers. MCP4726 also has features: - Output gain options: 1x, 2x - Voltage reference selection: VDD, VREF (Unbuffered or Buffered) But these are not supported in this change. (1x gain, VDD is selected) datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/22272C.pdf Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald <pmeerw@pmeerw.net> Cc: linux-iio@vger.kernel.org Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-11-18Merge tag 'iio-fixes-for-4.4a' of ↵Greg Kroah-Hartman
ssh://ra.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First set of IIO fixes for the 4.4 cycle. This set does not include those for issues introduced during the merge window. Fixes of those will follow in a future series. * ad5064 - Make sure the local i2c_write returns 0 on success rather than the number of bytes transfered. Otherwise we report an error on all writes. - Fix a shift for ad5629 and ad5669 which gives incorrect DAC output on these parts. * ad7793 - The product ID on the datasheet is wrong. Fix it in the driver. * IIO_DUMMY_EVGEN - select IRQ_WORK as a dependency. * lpc32xx - make sure clock is prepared before enabling. * si7020 - data byte order was reversed. Fix it. * vf610 - Internal temperature calculation was wrong if a different reference voltage was used. Now use a linear interpolation function to make it work over the full range. - Fix a division by zero in the case of a device tree property not being present (same issue two fixes). * xilinx XADC - VREFN scale was wrong - fix it.
2015-11-05Merge tag 'spi-v4.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "Quite a lot of activity in SPI this cycle, almost all of it in drivers with a few minor improvements and tweaks in the core. - Updates to pxa2xx to support Intel Broxton and multiple chip selects. - Support for big endian in the bcm63xx driver. - Multiple slave support for the mt8173 - New driver for the auxiliary SPI controller in bcm2835 SoCs. - Support for Layerscale SoCs in the Freescale DSPI driver" * tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (87 commits) spi: pxa2xx: Rework self-initiated platform data creation for non-ACPI spi: pxa2xx: Add support for Intel Broxton spi: pxa2xx: Detect number of enabled Intel LPSS SPI chip select signals spi: pxa2xx: Add output control for multiple Intel LPSS chip selects spi: pxa2xx: Use LPSS prefix for defines that are Intel LPSS specific spi: Add DSPI support for layerscape family spi: ti-qspi: improve ->remove() callback spi/spi-xilinx: Fix race condition on last word read spi: Drop owner assignment from spi_drivers spi: Add THIS_MODULE to spi_driver in SPI core spi: Setup the master controller driver before setting the chipselect spi: dw: replace magic constant by DW_SPI_DR spi: mediatek: mt8173 spi multiple devices support spi: mediatek: handle controller_data in mtk_spi_setup spi: mediatek: remove mtk_spi_config spi: mediatek: Update document devicetree bindings to support multiple devices spi: fix kernel-doc warnings about missing return desc in spi.c spi: fix kernel-doc warnings about missing return desc in spi.h spi: pxa2xx: Align a few defines spi: pxa2xx: Save other reg_cs_ctrl bits when configuring chip select ...
2015-10-28spi: Drop owner assignment from spi_driversAndrew F. Davis
An spi_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-25iio: ad5064: Fix ad5629/ad5669 shiftLars-Peter Clausen
The ad5629/ad5669 are the I2C variant of the ad5628/ad5668, which has a SPI interface. They are mostly identical with the exception that the shift factor is different. Currently the driver does not take care of this difference which leads to incorrect DAC output values. Fix this by introducing a custom channel spec for the ad5629/ad5669 with the correct shift factor. Fixes: commit 6a17a0768f77 ("iio:dac:ad5064: Add support for the ad5629r and ad5669r") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-25iio:ad5064: Make sure ad5064_i2c_write() returns 0 on successMichael Hennerich
i2c_master_send() returns the number of bytes transferred on success while the ad5064 driver expects that the write() callback returns 0 on success. Fix that by translating any non negative return value of i2c_master_send() to 0. Fixes: commit 6a17a0768f77 ("iio:dac:ad5064: Add support for the ad5629r and ad5669r") Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-11iio:dac:m62332: use dynamic scaleHartmut Knaack
Some regulators can supply multiple voltages. To take changing voltages into account, the scale needs to be calculated on every read access. Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
generated by cgit (git 2.34.1) at 2024-05-24 03:56:30 +0000