summaryrefslogtreecommitdiff
path: root/drivers/iio/humidity
AgeCommit message (Collapse)Author
2020-01-12iio: humidity: dht11 remove TODO since it doesn't make senseKent Gustavsson
DHT11 isn't addressable and will trigger temperature measurement on any data sent on the bus. Signed-off-by: Kent Gustavsson <kent@minoris.se> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-01-10Merge tag 'iio-for-5.6a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First set of new device support, features and cleanups for IIO in the 5.6 cycle New device support * ad7091r5 ADC - New driver with follow up patch adding scale and vref support. - DT bindings * ad7923 - Support for ad7908, ad7918 and ad7928 added to driver. * bma180 - Support the BMA254 accelerometer. Required fairly substantial rework to allow for small differences between this an existing parts. * bma400 accelerometer - New driver with follow up patch for regulator support. - DT bindings. * asc dlhl60d - New driver support this range of pressure and temperature sensors. - DT bindings. * ltc2496 ADC - New driver to support this ADC. - Split the existing LTC2497 driver generic component out and reuse. - DT bindings. * parallax ping - New driver supporting ultrasonic and laser tof distance sensors. - Bindings for these sensors. New features * core - New char type for read_raw returns, used for thermocouple types. - Rename read_first_n callback to read. The reasons behind the original naming are lost to the mists of time. * ad799x - Allow pm_ops to disable device completely allowing regulator power down. * bma180 - Enable basic regulator support. * dmaengine buffer - Report platform data alignment requirements via new ABI. * max31856 - Add option to set mains filter rejection frequency and document new in_temp_filter_notch_center_frequency ABI. - Add support for configuring HW averaging (oversampling ratio) - Add runtime configuration of thermocouple type and document new ABI. * maxim-thermocouple - Add read only access to thermocouple type using new ABI, includes adding more specific compatibles to reflect which variant of the chip is being used. * mpu6050 - Provide option to support the PMU9150 in package magnetometer directly rather than via auxiliary bus. * stm32_adc - Add overrun interrupt checks to detect if this happens. * st_lsm6dsx - Enable the sensor-hub support for lsm6dsm. Includes various reworks to allow this. Cleanups and minor fixes * Subsystem wide - Tidy up indentation in Kconfig and fix alphabetical order of AD7091R5. - Drop linux/gpio.h and linux/of_gpio.h from drivers that don't use them. * ad7266 - Convert to GPIO descriptors. * ad7303 - Avoid a dance with checking if the regulator is supplied by just using the optional request interface. * ad7887 - Simplify channel specification assignment to enable adding more devices. * ad7923 - Drop some unused and largely pointless defines of BOB_N==N variety. - Tidy up checkpatch warnings. - Add missing of_device_id table. * adf4350 - Convert to GPIO descriptors. * ak8975 - Convert to GPIO descriptors. * ADIS library and drivers - Expand scope of txrx_lock to cover all state and rename as state_lock - Add unlocked read / write to allow grouping of consecutive calls under single lock / unlock. - Add unlocked check_status, reset to allow grouping under single lock / unlock. - Remove remaining uses of core mlock for local state protection. mlock should never be used directly as it protects tightly defined core IIO device management state. * adis16240 - Enforce only supported SPI mode on driver load + add DT binding doc. * atlas-ph-sensor - Rename to atlas-sensor given it now covers things beyond ph sensors. * bma180 - Use local dev variable to tidy up code. - Use c99 style explicity .member assignment to make driver more readable. * bmp280 - Drop ACPI support. No evidence this was used and appropriate ID is not registered. - Allow ACPI to bind device via PRP0001 * dmaengine buffer - Use dma_request_chan instead of dma_request_slave_channel_reason as that ABI is going away. - Add module info to avoid tainting the kernel. * hts221 - Avoid magic number defines when only used to fill structure elements that are self describing. * lm3533 - Drop a stray semicolon. * max9611 - Cleanup enum handling to be more resilient to future changes. * mpu6050 - Delete MPU9150 from supported SPI devices as doesn't provide SPI. - Select I2C_MUX again after kbuild issue fixed elsewhere. * stm32-timer - Drop an unnecessary register update. * ssp_sensors - Convert to GPIO descriptors. * st_sensors - drop !CONFIG_ACPI defines as ACPI_PTR() will stop them being used anyway. - Make default platform data structures __maybe_unsued. - Fill in some missing kernel-doc function parameters. * st_lsm6dsx - white space fixes. - Mark some constants that aren't always used as __maybe_unused. - Drop of ID table guards as they just pervent use under ACPI. - Switch to device properties to allow ACPI usage. * st_uvis25 - Drop acpi.h include as no ACPI APIs used. * ti-ads1015 - Drop legacy platform data as no one seems to be using it. - Use the device property API instead of OF specific. * ti-ads7950 - typo fix in error message. * tag 'iio-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (99 commits) iio: accel: bma180: BMA254 support iio: pressure: bmp280: Allow device to be enumerated from ACPI iio: pressure: bmp280: Drop ACPI support dt-bindings: iio: adc: convert sd modulator to json-schema iio: buffer: rename 'read_first_n' callback to 'read' iio: buffer-dmaengine: Report buffer length requirements bindings: iio: pressure: Add documentation for dlh driver dt-bindings: Add asc vendor iio: pressure: Add driver for DLH pressure sensors iio: buffer-dmaengine: Add module information iio: accel: bma180: Use explicit member assignment iio: accel: bma180: Basic regulator support iio: accel: bma180: Add dev helper variable iio: imu: st_lsm6dsx: enable sensor-hub support for lsm6dsm iio: imu: st_lsm6dsx: rename st_lsm6dsx_shub_read_reg in st_lsm6dsx_shub_read_output iio: imu: st_lsm6dsx: check if shub_output reg is located in primary page iio: imu: st_lsm6dsx: check if pull_up is located in primary page iio: imu: st_lsm6dsx: check if master_enable is located in primary page iio: imu: st_lsm6dsx: export max num of slave devices in st_lsm6dsx_shub_settings iio: light: remove unneeded semicolon ...
2019-12-15iio: humidity: hts221: move register definitions to sensor structsLorenzo Bianconi
Move some register definitions to hts221_avg_list, hts221_avg_list and hts221_channels since they are used only there and simplify driver code Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-12-08iio: humidity: hdc100x: fix IIO_HUMIDITYRELATIVE channel reportingChris Lesiak
The IIO_HUMIDITYRELATIVE channel was being incorrectly reported back as percent when it should have been milli percent. This is via an incorrect scale value being returned to userspace. Signed-off-by: Chris Lesiak <chris.lesiak@licor.com> Acked-by: Matt Ranostay <matt.ranostay@konsulko.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-11-02iio: hdc100x: fix iio_triggered_buffer_{predisable,postenable} positionsAlexandru Ardelean
The iio_triggered_buffer_postenable() hook should be called first to attach the poll function and the iio_triggered_buffer_predisable() hook should be called last in the predisable hook. This change updates the driver to attach/detach the poll func in the correct order. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-07-27iio: humidity: Use device-managed APIsChuhong Yuan
Use device-managed APIs to simplify the code. The remove functions are redundant now and can be deleted. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-07-11Merge tag 'staging-5.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO driver updates from Greg KH: "Here is the big Staging and IIO driver update for 5.3-rc1. Lots of new IIO drivers are in here, along with loads of tiny staging driver cleanups and fixes. Overall we almost break even with the same lines added as removed. Full details are in the shortlog, they are too large to list here. All of these changes have been in linux-next for a while with no reported issues" * tag 'staging-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (608 commits) staging: kpc2000: simplify comparison to NULL in fileops.c staging: kpc2000: simplify comparison to NULL in dma.c staging: kpc2000: simplify comparison to NULL in kpc2000_spi.c staging: rtl8723bs: hal: remove redundant assignment to packetType staging: rtl8723bs: Change return type of hal_btcoex_IsBtDisabled() staging: rtl8723bs: Remove rtw_btcoex_DisplayBtCoexInfo() staging: rtl8723bs: Remove function rtw_btcoex_GetDBG() staging: rtl8723bs: Remove function rtw_btcoex_SetDBG() staging: rtl8723bs: Remove rtw_btcoex_IsBTCoexCtrlAMPDUSize() staging: rtl8723bs: Remove rtw_btcoex_BtInfoNotify() staging: rtl8723bs: Remove rtw_btcoex_ScanNotify() staging: rtl8723bs: Remove rtw_btcoex_SetSingleAntPath() staging: rtl8723bs: Remove rtw_btcoex_SetPGAntNum() staging: rtl8192e: remove redundant initialization of rtstatus staging: rtl8723bs: Remove rtw_btcoex_GetRaMask() staging: rtl8723bs: Remove rtw_btcoex_SetChipType() staging: rtl8723bs: Remove rtw_btcoex_ConnectNotify() staging: rtl8723bs: Remove rtw_btcoex_SetBTCoexist() staging: rtl8723bs: Remove rtw_btcoex_IsBtDisabled() staging: rtl8723bs: Remove rtw_btcoex_IsBtControlLps() ...
2019-07-03Merge branch 'timers/vdso' into timers/coreThomas Gleixner
so the hyper-v clocksource update can be applied.
2019-07-01Merge tag 'iio-for-5.3b' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of IIO device support, features, cleanups and minor fixes for 5.3. A few bits for the counters subsystem mixed in here as well. There are some late breaking fixes as well, which aren't so urgent they can't wait for the merge window. New Device Support * adf4371 - New driver + bindings. - Support the adf4372 PLL. Mostly ID and bindings. * ad8366 (note includes rework of driver needed to allow support for these). - Support the ADL5240 variable gain amplifier (VGA). - Support the ADA4961 digital gain amplifier (DGA). * dps310 - New driver, in several parts from different authors for this temp and pressure sensor. - Includes errata workaround for a temperature reading issue. * stk3310 - Support the stk3335, mostly ID. Features and cleanups * core - drop error handling on debugfs registration. - harden by making sure we don't overrun iio_chan_info_postfix. * docs - convert remaining docs to rst. At somepoint we'll fit these few into the main IIO docs. - improve sampling_frequency_available docs but explaining the range form. * ad_sigma_delta - Drop a pointless goto. * ad2s1210 - Drop pointless platform data null check seeing as we don't actually use platform data anymore. * ad7124 - Relax limitation on channel numbers to allow pseudo different channels. - Support control of whether the input is buffered via DT. - Use dynamic allocation for channel configuration to make it easier to support new devices. - YAML binding conversion. * ad7150 - Comment tidy up. - Consistent and simple if (ret) handling of i2c errors. - FIELD_GET and GENMASK. - Ternary rather than !!(condition) for readability. - Use macros to avoid repetition of channel definitions. * ad7606 - Add software channel config (rather that pin controlled) - Refactor to simplify addition of new part in future. * ad7746 - of_deivce_id table. * ad7780 - MAINTAINERS entry - YAML DT bindings. * ad8366 - Stop using core mlock in favour of well scoped local lock. - SPDX + copyright date update. * ad9834 - of_device_id table * adf4371 - Add support for output stage muting before lock on has occured. * adis library - MAINTAINERS entry to reflect that this now Alexandru's problem ;) * adis162xx: - Fix a slightly incorrect set of comments and print statements on minimum supported voltage. * adis16203 - of_device_id table. * adis16240 - Add of_device_id table (in two parts as first patch only used it for MODULE_DEVICE_TABLE.) * adt7316-spi - of_device_id table * adxl372 - YAML DT binding conversion. - Cleanup use of buffer callback functions (precursor to core rework). * bh1710 - Simplify getting the i2c adapter from the client. * dht11 - Mote to newer GPIO consumer interface. * kxcjk-1013.c - Add binding for sensor in display of some ultrabooks after userspace tools updated for it not be a problem to report two similar sensors. * imx7d - drop unused variables. - white space - define instead of variable for clock frequency that is fixed. - drop pointless error message. * messon_saradc - SPDX * sps30 - MAINTAINERS entry - YAML binding conversion. * st_accel - Tidy up ordering in various buffer related callbacks. This is part of a long running effort to simplify the core code. * stm32-dfsdm: - Manage the resolution cleanly in triggerd modes. - Add fast mode support which allows more flexible filter choices. - Add a comment on the reason for a 16 bit record when technically not 'required'. * st_lsm6dsx - Embed device name in the sensor_settings struct as i3c doesn't have a convenient name field to use for this. * xilinx-adc - Relax constraints on supported platforms to reflect that this can used with FPGAs on PCIe cards and hence many architectures. * counters/ftm-quaddec - Fix some formatting io MODULE_AUTHOR - MAINTAINERS entry Fixes * tools - fix incorrect handling of 32 bit channels. * sca3000 - Potential endian bug that is unlikely to bite anyone (be64 host seems unlikely for this old part). * stm32-adc - Add vdda-supply. On some boards it needs to be turned on to supply the ADC. DT bindings included. * stm32-dfsdm - Fix output resolution to work with filter orders other than 3. - Fix output datatype as it's signed and previously claimed not to be. * tag 'iio-for-5.3b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (68 commits) iio: iio-utils: Fix possible incorrect mask calculation iio: frequency: adf4371: Add support for output stage mute dt-bindings: iio: frequency: Add ADF4372 PLL documentation iio: frequency: adf4371: Add support for ADF4372 PLL dt-bindings: iio: adc: Add buffered input property Convert AD7124 bindings documentation to YAML format. iio: adc: ad7124: Shift to dynamic allocation for channel configuration iio: adc: ad7124: Add buffered input support iio: adc: ad7124: Remove input number limitation MAINTAINERS: add ADIS IMU driver library entry iio: adis162xx: fix low-power docs & reports counter/ftm-quaddec: Add missing '>' in MODULE_AUTHOR iio: core: no need to check return value of debugfs_create functions docs: iio: convert to ReST iio: adc: stm32-adc: add missing vdda-supply dt-bindings: iio: adc: stm32: add missing vdda supply iio: adc: stm32-dfsdm: add comment for 16 bits record iio: adc: stm32-dfsdm: add fast mode support iio: adc: stm32-dfsdm: manage data resolution in trigger mode iio: adc: stm32-dfsdm: fix data type ...
2019-06-22timekeeping: Use proper clock specifier names in functionsJason A. Donenfeld
This makes boot uniformly boottime and tai uniformly clocktai, to address the remaining oversights. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lkml.kernel.org/r/20190621203249.3909-2-Jason@zx2c4.com
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 3 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081205.739216165@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-17iio: humidity: Replace older GPIO APIs with GPIO Consumer APIs for the dht11 ↵Shobhit Kukreti
sensor The dht11 driver uses a single gpio to make measurements. It was using the older global gpio numberspace. The patch replaces the old gpio api with the new gpio descriptor based api. Removed header files "linux/gpio.h" and "linux/of_gpio.h" Signed-off-by: Shobhit Kukreti <shobhitkukreti@gmail.com> Acked-by: Harald Geyer <harald@ccbib.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 330Thomas Gleixner
Based on 1 normalized pattern(s): this file is subject to the terms and conditions of version 2 of the gnu general public license see the file copying in the main directory of this archive for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 55 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.108941081@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 309Thomas Gleixner
Based on 2 normalized pattern(s): it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 11 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000434.249870634@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 177Thomas Gleixner
Based on 1 normalized pattern(s): licensed under the gpl 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 135 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528170026.071193225@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-04drivers: iio: Kconfig: pedantic cleanupEnrico Weigelt, metux IT consult
Formatting of Kconfig files doesn't look so pretty, so just take damp cloth and clean it up. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-11-16iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbersHans de Goede
Before this commit sensor_hub_input_attr_get_raw_value() failed to take the signedness of 16 and 8 bit values into account, returning e.g. 65436 instead of -100 for the z-axis reading of an accelerometer. This commit adds a new is_signed parameter to the function and makes all callers pass the appropriate value for this. While at it, this commit also fixes up some neighboring lines where statements were needlessly split over 2 lines to improve readability. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-02-18iio: add SPDX identifier for various driversMatt Ranostay
Add GPLv2+ SPDX identifier and update email for author's drivers. Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-02-17iio: dht11: Improve detection of sensor typeHarald Geyer
The old code was based on a DHT11 datasheet which specifies a measurement range of 20%-90% RH. Turns out the sensor actually reports values outside this range, so we should support it as far as possible. Reported-by: Edward Attfield <edward@attfield.ca> Signed-off-by: Harald Geyer <harald@ccbib.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-01-30iio: humidity: hts221: remove unnecessary get_unaligned_le16()Lorenzo Bianconi
Remove unnecessary unaligned access routine in hts221_read_oneshot() and the related include Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-01-30iio: humidity: hts221: add regmap API supportLorenzo Bianconi
Introduce regmap API support to access to i2c/spi bus instead of using a custom support. Remove lock mutex since concurrency is already managed by regmap API Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-01-30iio: humidity: hts221: remove trailing whitespace from a commentLorenzo Bianconi
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-01-30iio: humidity: hts221: remove warnings in hts221_parse_{temp,rh}_caldata()Lorenzo Bianconi
Remove following sparse warnings in hts221_parse_temp_caldata() and in hts221_parse_rh_caldata(): drivers/iio/humidity/hts221_core.c:302:19: warning: cast to restricted __le16 drivers/iio/humidity/hts221_core.c:314:18: warning: cast to restricted __le16 drivers/iio/humidity/hts221_core.c:320:18: warning: cast to restricted __le16 drivers/iio/humidity/hts221_core.c:355:18: warning: cast to restricted __le16 drivers/iio/humidity/hts221_core.c:361:18: warning: cast to restricted __le16 Fixes: e4a70e3e7d84 ("iio: humidity: add support to hts221 rh/temp combo device") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-01-08iio: humidity: hts221: move common code in hts221_coreLorenzo Bianconi
Move duplicated i2c/spi probe code in hts221_probe() Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-13Merge tag 'staging-4.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO updates from Greg KH: "Here is the "big" staging and IIO driver update for 4.15-rc1. Lots and lots of little changes, almost all minor code cleanups as the Outreachy application process happened during this development cycle. Also happened was a lot of IIO driver activity, and the typec USB code moving out of staging to drivers/usb (same commits are in the USB tree on a persistent branch to not cause merge issues.) Overall, it's a wash, I think we added a few hundred more lines than removed, but really only a few thousand were modified at all. All of these have been in linux-next for a while. There might be a merge issue with Al's vfs tree in the pi433 driver (take his changes, they are always better), and the media tree with some of the odd atomisp cleanups (take the media tree's version)" * tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (507 commits) staging: lustre: add SPDX identifiers to all lustre files staging: greybus: Remove redundant license text staging: greybus: add SPDX identifiers to all greybus driver files staging: ccree: simplify ioread/iowrite staging: ccree: simplify registers access staging: ccree: simplify error handling logic staging: ccree: remove dead code staging: ccree: handle limiting of DMA masks staging: ccree: copy IV to DMAable memory staging: fbtft: remove redundant initialization of buf staging: sm750fb: Fix parameter mistake in poke32 staging: wilc1000: Fix bssid buffer offset in Txq staging: fbtft: fb_ssd1331: fix mirrored display staging: android: Fix checkpatch.pl error staging: greybus: loopback: convert loopback to use generic async operations staging: greybus: operation: add private data with get/set accessors staging: greybus: loopback: Fix iteration count on async path staging: greybus: loopback: Hold per-connection mutex across operations staging: greybus/loopback: use ktime_get() for time intervals staging: fsl-dpaa2/eth: Extra headroom in RX buffers ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-22iio:humidity: drop assign iio_info.driver_module and iio_trigger_ops.ownerJonathan Cameron
The equivalent of both of these are now done via macro magic when the relevant register calls are made. The actual structure elements will shortly go away. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
2017-07-25iio: humidity: hts221: move drdy enable logic in hts221_trig_set_state()Lorenzo Bianconi
Move data-ready configuration in hts221_buffer.c since it is only related to trigger logic Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-07-25iio: humidity: hts221: support open drain modeLorenzo Bianconi
Add open drain support in order to share requested IRQ line between hts221 device and other peripherals Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-07-22iio: humidity: hts221: support active-low interruptsLorenzo Bianconi
Add support for active low interrupts (IRQF_TRIGGER_LOW and IRQF_TRIGGER_FALLING). Configure the device as active high or low according to the requested irq line. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-07-22iio: humidity: hts221: squash hts221_power_on/off in hts221_set_enableLorenzo Bianconi
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-07-22iio: humidity: hts221: avoid useless ODR reconfigurationLorenzo Bianconi
Configure sensor ODR just in hts221_write_raw() in order to avoid to set device sample rate multiple times. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-07-22iio: humidity: hts221: do not overwrite reserved data during power-downLorenzo Bianconi
GENMASK(6, 3) in CTRL_REG1 and GENMASK(6, 2) in CTRL_REG2 are marked reserved. Do not changed the original value (not declared in the datasheet) during power-down/suspend routines. Fixes: e4a70e3e7d84 (iio: humidity: add support to hts221 rh/temp device) Fixes: b7079eeac5da (iio: humidity: hts221: add power management support) Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-07-22iio: humidity: hts221: move BDU configuration in probe routineLorenzo Bianconi
Enable Block Data Update in hts221_probe() in order to avoid to reconfigure it every time the sensor is enabled Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-07-22iio: humidity: hts221: refactor write_with_mask codeLorenzo Bianconi
Move bit-shift in hts221_write_with_mask() instead of coding the shift depth in the configured value. That change will be necessary to fix an issue in device power-down procedure. Simplify hts221_avg_list table management Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-07-01iio: humidity: htu21: Add OF match tableManivannan Sadhasivam
Add of_match_table for Measurement-Specialties htu21 temperature & humidity sensor and humidity part of MS8607 sensor Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-01iio: humidity: hdc100x: add match table and device id'sMichael Stecklein
Add of_match_table and point it to a list of compatible device tree device id's. Signed-off-by: Michael Stecklein <m-stecklein@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-01iio: humidity: hdc100x: document compatible HDC10xx devicesMichael Stecklein
Include datasheet links, add i2c_device_id entries, and update kconfig help for compatible HDC10xx devices: HDC1000, HDC1008, HDC1010, HDC1050, and HDC1080. Signed-off-by: Michael Stecklein <m-stecklein@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-14iio: humidity: hts221: add power management supportLorenzo Bianconi
Add system sleep power management support to hts221 driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-04-02iio: humidity: hts221: Remove unnecessary cast on void pointersimran singhal
The following Coccinelle script was used to detect this: @r@ expression x; void* e; type T; identifier f; @@ ( *((T *)e) | ((T *)x)[...] | ((T*)x)->f | - (T*) e ) Signed-off-by: simran singhal <singhalsimran0@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-04-01iio: humidity: hdc100x: constify attribute_group structuressimran singhal
Check for attribute_group structures that are only stored in the attrs filed of iio_info structure. As the attrs field of iio_info structures is constant, so these attribute_group structures can also be declared constant. Done using coccinelle: @r1 disable optional_qualifier @ identifier i; position p; @@ static struct attribute_group i@p = {...}; @ok1@ identifier r1.i; position p; struct iio_info x; @@ x.attrs=&i@p; @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ static +const struct attribute_group i={...}; @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct attribute_group i; File size before: text data bss dec hex filename 3459 488 0 3947 f6b drivers/iio/humidity/hdc100x.o File size after: text data bss dec hex filename 3507 424 0 3931 f5b drivers/iio/humidity/hdc100x.o Signed-off-by: simran singhal <singhalsimran0@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-03-25iio: hid: Add humidity sensor supportSong Hongyan
Environmental humidity sensor is a hid defined sensor, it shows raw humidity measurement of air. More information can be found in: http://www.usb.org/developers/hidpage/HUTRR39b.pdf According to IIO ABI definition, humidityrelative data output unit is milli percent. Add the unit convert from percent to milli percent. Signed-off-by: Song Hongyan <hongyan.song@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-02-06Merge 4.10-rc7 into staging-nextGreg Kroah-Hartman
This resolves the merge errors that were reported in linux-next and it picks up the staging and IIO fixes that we need/want in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-22iio: dht11: Use usleep_range instead of msleep for start signalJohn Brooks
The DHT22 (AM2302) datasheet specifies that the LOW start pulse should not exceed 20ms. However, observations with an oscilloscope of an RPi Model 2B (rev 1.1) communicating with a DHT22 sensor showed that the driver was consistently sending start pulses longer than 20ms: Kernel 4.7.10-v7+ (n=132): Minimum pulse length: 20.20ms Maximum: 29.84ms Mean: 24.96ms StDev: 2.82ms Sensor response rate: 100% Read success rate: 76% On kernel 4.8, the start pulse was so long that the sensor would not even respond 97% of the time: Kernel 4.8.16-v7+ (n=100): Minimum pulse length: 30.4ms Maximum: 74.4ms Mean: 39.3ms StDev: 10.2ms Sensor response rate: 3% Read success rate: 3% The driver would return ETIMEDOUT and write log messages like this: [ 51.430987] dht11 dht11@0: Only 1 signal edges detected [ 66.311019] dht11 dht11@0: Only 0 signal edges detected Replacing msleep(18) with usleep_range(18000, 20000) made the pulse length sane again and restored responsiveness: Kernel 4.8.16-v7+ with usleep_range (n=123): Minimum pulse length: 18.16ms Maximum: 20.20ms Mean: 19.85ms StDev: 0.51ms Sensor response rate: 100% Read success rate: 84% Cc: stable@vger.kernel.org Signed-off-by: John Brooks <john@fastquake.com> Reviewed-by: Harald Geyer <harald@ccbib.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-12-03iio: humidity: Support acpi probe for hts211Shrirang Bagul
Support driver probe by reading unique HID on systems based on ACPI instead of DT compatible strings. Signed-off-by: Shrirang Bagul <shrirang.bagul@canonical.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-11-01iio: si7020: Add devicetree support and trivial bindingsPaul Kocialkowski
This adds devicetree support for the si7020 iio driver. Since it works well without requiring any additional property, its compatible string is added to the trivial i2c devices bindings list. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-11-01iio: humidity: remove duplicated include from hts221_buffer.cWei Yongjun
Remove duplicated include. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-10-23iio: humidity: hdc100x: add triggered buffer support for HDC100XAlison Schofield
Triggered buffer support uses the HDC100X's dual acquisition mode to read both humidity and temperature in one shot. This patch depends on 447136effbf4 ("iio: humidity: hdc100x: fix sensor data reads of temp and humidity") Signed-off-by: Alison Schofield <amsfield22@gmail.com> Cc: Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>