summaryrefslogtreecommitdiff
path: root/drivers/iio/inkern.c
AgeCommit message (Collapse)Author
2017-07-27Merge tag 'iio-for-4.14a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First round of IIO new device support, features and cleanups for the 4.14 cycle. 4 completely new drivers in this set and plenty of other stuff. One ABI change due to a silly mistake a long time back. Hopefully no one will notice. It effects the numerical order of consumer device channels which was the reverse of the obvious. It's going the slow way to allow us some margin to spot if we have broken userspace or not (seems unlikely) New Device Support * ccs811 - new driver for the Volatile Organic Compounds (VOC) sensor. * dln2 adc - new driver for the ADC on this flexible usb board. * EP93xx - new driver for this Cirrus logic SoC ADC. * ltc2471 - new ADC driver support the ltc2471 and ltc2473 * st_accel - add trivial table entries to support H3LIS331DL, LIS331DL, LIS3LV02DL. * st_gyro - add L3GD20H support (again) having fixed the various things that were broken in the first try. Includes devicetree binding. * stm32 dac - add support for the DACs in the STM32F4 series Features * Documentation - add missing power attribute documentation to the ABI docs. * at91-sama5d2 - add hardware trigger and buffered capture support with bindings. - suspend and resume functionality. * bmc150 - support for the BOSC0200 ACPI device id seen on some tablets. * hdc100x - devicetree bindings - document supported devices - match table and device ids. * hts221 - support active low interrupts (with bindings) - open drain mode with bindings. * htu21 - OF match table and bindings. * lsm6dsx - open drain mode with bindings * ltc2497 - add support for board file based consumer mapping. * ms5367 - OF match table and bindings. * mt7622 - binding document and OF match table. - suspend and resume support. * rpr0521 - triggered buffer support. * tsys01 - OF match table and bindings. Cleanups and minor fixes * core - fix ordering of IIO channels to entry numbers when using iio_map_array_register rather than reversing them. - use the new %pOF format specifier rather than full name for the device tree nodes. * ad7280a - fix potential issue with macro argument reuse. * ad7766 - drop a pointless NULL value check as it's done in the gpiod code. * adis16400 - unsigned -> unsigned int. * at91 adc - make some init data static to reduce code size. * at91-sama5d2 ADC - make some init data static to reduce code size. * da311 - make some init data static to reduce code size. * hid-sensor-rotation - drop an unnecessary static. * hts221 - refactor the write_with_mask code. - move the BDU configuration to probe time as there is no reason for it to change. - avoid overwriting reserved data during power-down. This is a fix, but the infrastructure need was too invasive to send it to mainline except in a merge window. It's not a regression as it was always wrong. - avoid reconfigure the sampling frequency multiple times by just doing it in the write_raw function directly. - refactor the power_on/off calls into a set_enable. - move the dry-enable logic into trig_set_state as that is the only place it was used. * ina219 - fix polling of ina226 conversion ready flag. * imx7d - add vendor name in kconfig for consistency with similar parts. * mcp3422 - Change initial channel to 0 as it feels more logical. - Check for some errors in probe. * meson-saradc - add a check of of_match_device return value. * mpu3050 - allow open drain for any interrupt type. * rockchip adc - add check on of_match_device return value. * sca3000 - drop a trailing whitespace. * stm32 adc - make array stm32h7_adc_ckmodes_spec static. * stm32 dac - fix an error message. * stm32 timers - fix clock name in docs to match reality after changes. * st_accel - explicit OF table (spi). - add missing entries to OF table (i2c). - rename of_device_id table to drop the part name. - adding missing lis3l02dq entry to bindings. - rename H3LIS331DL_DRIVER_NAME to line up with similar entries in driver. * st_gyro - explicit OF table (spi). * st_magn - explicit OF table (spi). - enable multiread for lis3mdl. * st_pressure - explicit OF table (spi). * st_sensors common. - move st_sensors_of_i2c_probe and rename to make it available for spi drivers. * tsc3472 - don't write an extra byte when writing the ATIME register. - add a link to the datasheet. * tsl2x7x - continued staging cleanups - add of_match_table. - drop redundant power_state sysfs attribute. - drop wrapper tsl2x7x_i2c_read. - clean up i2c calls made in tsl2x7x_als_calibrate. - refactor the read and write _event_value callbacks to handle additional elements. - use usleep_range instead of mdelay. - check return value from tsl2x7x_invoke_change. * zpa2326 - add some newline to the end of logging macros.
2017-07-22iio: Convert to using %pOF instead of full_nameRob Herring
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: linux-iio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-07-15iio: core: Fix mapping of iio channels to entry numbersGaurav Gupta
When adding maps to the list, they were added using list_add, which adds them in LIFO order. When parsing using iio_channel_get_all(), these elements are hence returned in reverse order. As a result, the iio_hwmon mapping maps the first entry to the last channel and so on. Signed-off-by: Gaurav Gupta <gauragup@cisco.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-07-03Merge tag 'char-misc-4.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc updates from Greg KH: "Here is the "big" char/misc driver patchset for 4.13-rc1. Lots of stuff in here, a large thunderbolt update, w1 driver header reorg, the new mux driver subsystem, google firmware driver updates, and a raft of other smaller things. Full details in the shortlog. All of these have been in linux-next for a while with the only reported issue being a merge problem with this tree and the jc-docs tree in the w1 documentation area" * tag 'char-misc-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (147 commits) misc: apds990x: Use sysfs_match_string() helper mei: drop unreachable code in mei_start mei: validate the message header only in first fragment. DocBook: w1: Update W1 file locations and names in DocBook mux: adg792a: always require I2C support nvmem: rockchip-efuse: add support for rk322x-efuse nvmem: core: add locking to nvmem_find_cell nvmem: core: Call put_device() in nvmem_unregister() nvmem: core: fix leaks on registration errors nvmem: correct Broadcom OTP controller driver writes w1: Add subsystem kernel public interface drivers/fsi: Add module license to core driver drivers/fsi: Use asynchronous slave mode drivers/fsi: Add hub master support drivers/fsi: Add SCOM FSI client device driver drivers/fsi/gpio: Add tracepoints for GPIO master drivers/fsi: Add GPIO based FSI master drivers/fsi: Document FSI master sysfs files in ABI drivers/fsi: Add error handling for slave drivers/fsi: Add tracepoints for low-level operations ...
2017-06-03iio: inkern: api for manipulating ext_info of iio channelsPeter Rosin
Extend the inkern api with functions for reading and writing ext_info of iio channels. Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-26iio: inkern: fix a static checker errorPeter Rosin
Avoid this smatch error: drivers/iio/inkern.c:751 iio_read_avail_channel_raw() error: double unlock 'mutex:&chan->indio_dev->info_exist_lock' Fixes: 00c5f80c2fad ("iio: inkern: add helpers to query available values from channels") Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-14iio: inkern: pass through raw values if no scalingLinus Walleij
When a consumer calls iio_read_channel_processed() the IIO core tries to apply scaling to the value, but if the channel only supports reading raw values, we should return that raw value to the cosumer instead of an error. This is what userspace is expected to do with sensors only providing raw values so the kernel should do the same, so as to avoid adding scaling boilerplate to drivers for hardware that actually return processed values from raw reads. A sensor not providing a scale, but providing a _raw attribute could be valid if for example the scale is the default of 1, but an offset needs to be applied to convert to the _processed form. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-11-13iio: inkern: add helpers to query available values from channelsPeter Rosin
Specifically a helper for reading the available maximum raw value of a channel and a helper for forwarding read_avail requests for raw values from one iio driver to an iio channel that is consumed. These rather specific helpers are in turn built with generic helpers making it easy to build more helpers for available values as needed. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-27iio: inkern: add iio_read_channel_offset helperMatt Ranostay
Allow access to underlying channel IIO_CHAN_INFO_OFFSET from a consumer. Signed-off-by: Matt Ranostay <matt@ranostay.consulting> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-19iio: core: Add devm_ APIs for iio_channel_{get,release}_allLaxman Dewangan
Some of kernel driver uses the IIO framework to get the sensor value via ADC or IIO HW driver. The client driver get iio channel by iio_channel_get_all() and release it by calling iio_channel_release_all(). Add resource managed version (devm_*) of these APIs so that if client calls the devm_iio_channel_get_all() then it need not to release it explicitly, it can be done by managed device framework when driver get un-binded. This reduces the code in error path and also need of .remove callback in some cases. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-19iio: core: Add devm_ APIs for iio_channel_{get,release}Laxman Dewangan
Some of kernel driver uses the IIO framework to get the sensor value via ADC or IIO HW driver. The client driver get iio channel by iio_channel_get() and release it by calling iio_channel_release(). Add resource managed version (devm_*) of these APIs so that if client calls the devm_iio_channel_get() then it need not to release it explicitly, it can be done by managed device framework when driver get un-binded. This reduces the code in error path and also need of .remove callback in some cases. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-16iio: inkern: add a missing space before ifSlawomir Stepien
This fixes the error reported by checkpatch.pl: ERROR: space required before the open parenthesis '(' Signed-off-by: Slawomir Stepien <sst@poczta.fm> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-01Merge tag 'iio-fixes-for-4.5a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First set of IIO fixes for the 4.5 cycle. This set comprises those not dependent on patches in the 4.5 merge cycle. A second set will follow shortly with ones that are. * core in kernel interfaces - fix a possible NULL dereference that is a theoretical possibility via odd usage of iio_channel_release. Pretty much a hardening of the interface, but observed in the wild with the twl4030_charger driver. * acpi-als - report the data as processed as it is in lux. This fixes a wrong use of the IIO ABI. However, old _raw version retained to avoid breaking any userspace in the wild that is relying on that (none known but it doesn't hurt us much to retain it) * ade7753 - fix some error handling to avoid use of unitialized data. * ltr501 - use a signed return type for ltr501_match_samp_freq so as to allow returning of an error code. * mcp4725 - set name field of struct iio_dev to ensure the sysfs name attribute doesn't give NULL. * mpl115 - temperature offset sign is wrong. * stk8ba50 - IIO_TRIGGER dependency added * ti_am335x_adc - Label buffer as a software buffer. It's actually a hybrid of a true hardware buffer feeding a kfifo, but the meaning of these fields has changed a little recently and in this case it should be labeled a software buffer ensure it is allowed to use the kfifo. * vf610_adc - HAS_IOMEM dependency
2016-01-30iio: inkern: fix a NULL dereference on errorDan Carpenter
In twl4030_bci_probe() there are some failure paths where we call iio_channel_release() with a NULL pointer. (Apparently, that driver can opperate without a valid channel pointer). Let's fix it by adding a NULL check in iio_channel_release(). Fixes: 2202e1fc5a29 ('drivers: power: twl4030_charger: fix link problems when building as module') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-12iio/inkern.c Use list_for_each_entry_safeAnshul Garg
Use list_for_each_entry_safe instead of list_for_each_safe and list_entry call. Signed-off-by: Anshul Garg <aksgarg1989@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-01-21Merge tag 'iio-for-3.20a_take2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-testing Jonathan writes: First round of IIO new drivers, cleanups and functionality for the 3.20 cycle take 2 Updated pull request with Daniel's fix on top for the power management Kconfig changes that had snuck in since last update of the IIO tree worked it's way through from mainline. Original pull message New device support * jsa1212 proxmity / ambient light sensor * SM08500 supported added to the kxcjk-1013 accelerometer driver * KMX61 Accelerometer/Magnetometer. This took a somewhat rocky path being first merged, then reverted for a rewrite after a discussion of how to support additional functionality and finally being merged prior to some last reviews coming in, with resultant follow up patches. * Freescale mma9551l driver (minor follow up warning supression patch). * Semtech SX9500 proximity device driver. * ak8975 gains support for ak09911 and ak09912 and drop the standalone driver for the ak09911. New functionality * Dummy driver gains some virtual registers making it more flexible. * IIO_ACTIVITY channel types, with modifiers running, walking etc. This is to support on chip motion clasifiers. As such it is in the form of a confidence percentage. The only devices so far only do binary decisions but this gives us room when other devices give more nuanced clasification. * IIO_EV_DIR_NONE type for events where there is no obvious direction. First case is step detection. * IIO_STEPS channel type for pedometers. * ENABLE mask element used to control turning on counting types such as the pedometer that need a 'start point'. * INSTANCE event type to support things that happen once. * info element for height calibration (used in various motion estimation algorithms). Note heigh tof use * dummy driver demonstration of the use of all the new bits above. * event monitor support for the new events. * inv_mpu6050 gains an i2c mux to allow bypassing the device to access additional devices connected on the other side of it. Note that in Windows these are handled by firmware on the device and not exposed directly. * inv_mpu6050 gains ACPI enumeration. * inkern interface gains iio_write_channel_raw to allow in kernel users of DAC functionality via a simple wrapper. * Document input current readings in the ABI docs. * Add an error message when we get an out of range error in device tree processing for the in kernel interfaces. Basically a device tree debugging aid. * Add a sanity check that a scan index for a channel is unique during registration. There to help catch bugs as this should never happen in a bug free driver. Cleanups and fixlets A rework of buffer registration from Lars - a precursor to some other upcoming new stuff (a few patches from others rolled in here as well). * Ensure all drivers register the same channels for the device and buffer. * Move buffer registration into the core rather than using the old two step approach. Now we have simple ways of using a unified set channels for both without requiring channels be exposed by both interface, this removes a fair bit of boilerplate. * Stop sca3000 and ad5933 (both in staging) enabling buffer channels by default. It has long be convention in IIO to startup with no channels enabled and leave it up to userspace to say what goes in the buffer. Getting rid of these allows us to drop export of iio_scan_mask_set. * Drop get_bytes_per_datum from iio_buffer_access_funcs as not been used for a while. * Allocate standard buffer attributes in the core rather than in every driver with a buffer. * Make the length attribute read only when a driver is not able to set the length. * Drop the get_length callback for buffers as it is already available in struct iio_buffer. * Drop an unused arguement form iio_kfifo_allocate and add devm allocator for it. * some kconfig entries gain anotation with the resulting module name. * Fix a resulting compile issue in dummy driver due to a stub taking wrong parameters as a result of the above rework. * Fix an off by 2 error in copying the core assigned buffer attributes. Other cleanups, * Trivial space before comma fixups. * ak8975 fixlets - none critical. Rework to allow more device support. * Drop unnecessary sizeof(u8) calls. * bmp280 - refactor the compensation code to reduce copy operations and code length. A second patch futher optimized this and performed some other minor cleanups. * kxcjk-1013 - various power control cleanups to avoid unnecessary enable / disable of device. Make sure it is only controlled at all if CONFIG_PM is enabled. Also som cleanups of error paths. * Small cleanups in adf4530 driver - pointless message and unnecessary braces. * Clarifiy the proximity ABI docs to make it clear it should get bigger as we move futher away. * Drop a misleading comment form industrialio-core.c * Trivial white space cleanups. * sca3000 looses an unused debug function. * Fix char unsigned ordering in ad8366 * Increase the sleep time in ad9523 to make it predictable (value didn't really matter so make it more than 20 msecs) * mxs-lradc touchscreen property cleanups in device tree are fixed to ensure the meet all the 'interesting' documentation. * A couple of cleanups for the staging ad5933 driver to avoid unnecessary conversion to a processed temperature vlaue in kernel and remove platform data form the state structure as not needed after probe. * Fix a wrong scale factor in the docs. Misc * Add IIO include files to the maintainers entry.
2015-01-08Merge tag 'iio-fixes-for-3.19a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First round of IIO fixes for the 3.19 cycle. * ad799x fix ad7991/ad7995/ad7999 setup as they do not have a configuration register to write to. It is written during the convesion sequence. As such we don't want to write to it at other times. * Fix iio_channel_read utility function to return to ensure it is apparent if the relevant element is not there. This avoids using a wrong value if some channels have the element and others do not.
2015-01-05iio: inkern: add out of range error messageStefan Wahren
If the DT contains an invalid channel specifier then the probe of iio_hwmon fails with the following message: iio_hwmon: probe of iio_hwmon failed with error -22 So it's better to print out the relevant channel specifier in error case to locate the problem. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-01-01iio: iio: Fix iio_channel_read return if channel havn't infoFabien Proriol
When xilinx-xadc is used with hwmon driver to read voltage, offset used for temperature is always applied whatever the channel. iio_channel_read must return an error to avoid offset for channel without IIO_CHAN_INFO_OFFSET property. Signed-off-by: Fabien Proriol <fabien.proriol@jdsu.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-12iio: inkern: add iio_write_channel_rawDmitry Eremin-Solenikov
Introduce API for easy in-kernel setting of DAC values. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-11-05Merge tag 'iio-for-3.19a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First round of new drivers, features and cleanups for IIO in the 3.19 cycle. New drivers / supported parts * rockchip - rk3066-tsadc variant * si7020 humidity and temperature sensor * mcp320x - add mcp3001, mcp3002, mcp3004, mcp3008, mcp3201, mcp3202 * bmp280 pressure and temperature sensor * Qualcomm SPMI PMIC current ADC driver * Exynos_adc - support exynos7 New features * vf610-adc - add temperature sensor support * Documentation of current attributes, scaled pressure, offset and scaled humidity, RGBC intensity gain factor and scale applied to differential voltage channels. * Bring iio_event_monitor up to date with newer modifiers. * Add of_xlate function to allow for complex channel mappings from the device tree. * Add -g parameter to generic_buffer example to allow for devices with directly fed (no trigger) buffers. * Move exynos driver over to syscon for PMU register access. Cleanups, fixes for new drivers * lis3l02dq drop an unneeded else. * st sensors - renam st_sensors to st_sensor_settings (for clarity) * st sensors - drop an unused parameter from all the probe utility functions. * vf610 better error handling and tidy up. * si7020 - cleanups following merge * as3935 - drop some unnecessary semicolons. * bmp280 - fix the pressure calculation.
2014-10-25iio: inkern: Add of_xlate function to struct iio_infoIvan T. Ivanov
When #iio-cells is greater than '0', the driver could provide a custom of_xlate function that reads the *args* and returns the appropriate index in registered IIO channels array. Add simple translation function, suitable for the most 1:1 mapped channels in IIO chips, and use it when driver did not provide custom implementation. Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-08-25iio:inkern: fix overwritten -EPROBE_DEFER in of_iio_channel_get_by_nameJohannes Pointner
Fixes: a2c12493ed7e ('iio: of_iio_channel_get_by_name() returns non-null pointers for error legs') which improperly assumes that of_iio_channel_get_by_name must always return NULL and thus now hides -EPROBE_DEFER. Signed-off-by: Johannes Pointner <johannes.pointner@br-automation.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Cc: Stable@vger.kernel.org
2014-06-21iio: of_iio_channel_get_by_name() returns non-null pointers for error legsAdam Thomson
Currently in the inkern.c code for IIO framework, the function of_iio_channel_get_by_name() will return a non-NULL pointer when it cannot find a channel using of_iio_channel_get() and when it tries to search for 'io-channel-ranges' property and fails. This is incorrect behaviour as the function which calls this expects a NULL pointer for failure. This patch rectifies the issue. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Cc: Stable@vger.kernel.org
2014-04-29IIO: core: Introduce read_raw_multiSrinivas Pandruvada
This callback is introduced to overcome some limitations of existing read_raw callback. The functionality of both existing read_raw and read_raw_multi is similar, both are used to request values from the device. The current read_raw callback allows only two return values. The new read_raw_multi allows returning multiple values. Instead of passing just address of val and val2, it passes length and pointer to values. Depending on the type and length of passed buffer, iio client drivers can return multiple values. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-03-16iio: inkern: add iio_read_channel_average_rawSebastian Reichel
Add iio_read_channel_average_raw to support reading averaged raw values in consumer drivers. Signed-off-by: Sebastian Reichel <sre@debian.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-07-03iio: inkern: fix iio_convert_raw_to_processed_unlockedAlexandre Belloni
When reading IIO_CHAN_INFO_OFFSET, the return value of iio_channel_read() for success will be IIO_VAL*, checking for 0 is not correct. Without this fix the offset applied by iio drivers will be ignored when converting a raw value to one in appropriate base units (e.g mV) in a IIO client drivers that use iio_convert_raw_to_processed including iio-hwmon. Cc: <stable@vger.kernel.org> # 3.10.x Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-06-04iio:inkern: Fix typo/bug in convert raw to processed.Michael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-06-04inkern: iio_device_put after incorrect return/gotoJoe Perches
The code uses return foo; goto err_type; when instead the form should have been ret = foo; goto err_type; Here this causes a useful iio_device_put to be skipped. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-03-16iio: Add OF supportGuenter Roeck
Provide bindings and parse OF data during initialization. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-02-06iio: Update iio_channel_get API to use consumer device pointer as argumentGuenter Roeck
For iio_channel_get to work with OF based configurations, it needs the consumer device pointer instead of the consumer device name as argument. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Anton Vorontsov <anton@enomsg.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-02-02iio: Simplify iio_map_array_unregister APIGuenter Roeck
Instead of requiring the map to unregister, simply unregister all map entries associated with the given iio device. This simplifies map removal and also works for maps generated through devicetree. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-02-02iio: Update iio_channel_get_all and iio_channel_get_all_cb APIGuenter Roeck
Pass device pointer instead of device name as parameter to iio_channel_get_all and iio_channel_get_all_cb. This will enable us to use OF information to retrieve consumer channel information. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-10staging:iio:in kernel users: Add a data field for channel specific info.Jonathan Cameron
Used to allow information about a given channel mapping to be passed through from board files to the consumer drivers. Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19iio: Add a logarithmic fractional value typeLars-Peter Clausen
For ADCs or DACs the denominator for fractional types often is a power of two. In this case we can use a shift operation instead of the rather expensive 64 bit division. This patch adds a new fractional type which expects the denominator to be specified as the log2 of the actual denominator. E.g. for ADCs and DACs this will usually be the number of significant bits. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-10-19iio: Don't compare boolean values to true/falseLars-Peter Clausen
Fixes the following warnings from coccicheck: drivers/iio/inkern.c:81:6-14: WARNING: Comparison to bool drivers/iio/dac/ad5686.c:191:5-11: WARNING: Comparison to bool Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-22iio: inkern: clean up error return codeKim, Milo
When the IIO consumer tries to get specific IIO channel, few error cases can be happened. (a) Memory allocation failure (b) No matched ADC channel error (c) Invalid input arguments This patch enables cleaning up error handling in case of (a) and (b). In error handling code, (a): the reference count of the IIO device should be decreased. (b): the allocated memory should be freed with restoring the reference count. Therefore iio_deivce_put() is called in both cases. This can be handled in the last error statement. Additionally, integer variable is used for stating each error case explicitly. Then, the error returns as ERR_PTR() with this value. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-22iio: inkern: put the IIO device when it fails to allocate memoryKim, Milo
The reference count of the IIO device is increased if the IIO map has matched consumer name. After then, it tries to allocate the iio_channel which is used by the consumer. If it fails to allocate memory, the reference count should be decreased. This patch enables restoring the reference count of the IIO device. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-17iio:inkern: Add function to read the processed valueLars-Peter Clausen
Add a function to read a processed value from a channel. The function will first attempt to read the IIO_CHAN_INFO_PROCESSED attribute. If that fails it will read the IIO_CHAN_INFO_RAW attribute and convert the result from a raw value to a processed value. The patch also introduces a function to convert raw value to a processed value and exports it, in case a user needs or wants to do the conversion by itself. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-17iio: inkern: add error case in iio_channel_get()Kim, Milo
The datasheet name is defined in the IIO driver. On the other hand, the adc_channel_label is configured in the platform side. If the datasheet name is not matched with any adc_channel_label, the iio_channel_get() should be returned as error for preventing invalid channel data access. This can be handled either way. (a) checking null data when using it : in the xxx_read_raw() or (b) error returns when the channel is requested : this patch The IIO consumer can't use the channel with invalid channel spec. Therefore case (b) is more reasonable. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-15iio: inkern: allocate zeroed memoryKim, Milo
Use kzalloc() rather than kmalloc() for initializing the iio_channel structure. This patch enables the iio_dev and iio_chan_spec are set to NULL. This may prevent the page fault problem because the pointer of iio_chan_spec is initialized as NULL. The iio_chan_spec is updated only in case that the IIO map has specific channel label. When the map has no ADC channel label, then the value of iio_chan_spec remains as invalid pointer. To prevent this problem, the pointer should be initialized as NULL. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-08-27iio: use IIO_CHAN_INFO_RAW rather than 0Kim, Milo
(a) For better readability, replace 0 with IIO_CHAN_INFO_RAW. (b) Make same line-format as other apis() : iio_read_channel_scale() and iio_read_channel_offset() Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-07-12iio: double unlock on error pathDan Carpenter
We should be holding the mutex when we goto error_free_chans. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-07-08iio: Fix inkern remove incorrect put of deviceJonathan Cameron
The device_get is after this point so on error we should not be removing it. Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-06-30iio: Rename _st_ functions to loose the bit that meant the staging version.Jonathan Cameron
These were originally introduced when the plan was to have parallel IIO cores in and out of staging with a slow move between them. Now we have reached the point where the whole core has moved, they need clearing up! Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-06-04iio:inkern: Use iio_device_{get,put}Lars-Peter Clausen
Use iio_device_get and iio_device_put instead of open-coding it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-02Merge 3.4-rc5 into staging-nextGreg Kroah-Hartman
This resolves the conflict in: drivers/staging/vt6656/ioctl.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-25IIO: Move the core files to drivers/iioJonathan Cameron
Take the core support + the kfifo buffer implentation out of staging. Whilst we are far from done in improving this subsystem it is now at a stage where the userspae interfaces (provided by the core) can be considered stable. Drivers will follow over a longer time scale. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>