summaryrefslogtreecommitdiff
path: root/drivers/iio/magnetometer
AgeCommit message (Collapse)Author
2020-07-05iio:magnetometer:ak8974: Fix alignment and data leak issuesJonathan Cameron
One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data. This data is allocated with kzalloc so no data can leak appart from previous readings. Fixes: 7c94a8b2ee8cf ("iio: magn: add a driver for AK8974") Reported-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: <Stable@vger.kernel.org>
2020-06-14iio: magnetometer: ak8974: Fix runtime PM imbalance on errorDinghao Liu
When devm_regmap_init_i2c() returns an error code, a pairing runtime PM usage counter decrement is needed to keep the counter balanced. For error paths after ak8974_set_power(), ak8974_detect() and ak8974_reset(), things are the same. However, When iio_triggered_buffer_setup() returns an error code, there will be two PM usgae counter decrements. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Fixes: 7c94a8b2ee8c ("iio: magn: add a driver for AK8974") Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-05-10iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_triggerAlexandru Ardelean
The main intent here is to get rid of the iio_buffer_set_attrs() helper, or at least rework it's usage a bit. The problem with that helper is that it needs a pointer to the buffer, which makes supporting multiple buffers per IIO device a bit more cumbersome. The hid_sensor_setup_trigger() is pretty much used in the same way: - iio_triggered_buffer_setup() gets called before - then hid_sensor_setup_trigger() and hid_sensor_setup_batch_mode() gets called which may attach some fifo attributes This change merges the 2 together under the hid_sensor_setup_trigger() function. Only the &iio_pollfunc_store_time is passed to all devices, so it's not even required to pass it explicitly outside of the common hid_sensor_setup_trigger() function. Moving the devm_iio_triggered_buffer_setup/cleanup() calls into the common place code can help the rework of the buffer code, since it is in one place. One detail of the change is that there are 2 drivers that use devm_iio_triggered_buffer_setup(). That function gets implicitly replaced with iio_triggered_buffer_setup()/cleanup(), but since all drivers call both hid_sensor_setup_trigger9) & hid_sensor_remove_trigger() trigger, the iio_triggered_buffer_cleanup() piggy backs on the hid_sensor_remove_trigger() call, which should cover the cleanup. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-05-03iio: magnetometer: ak8974: Provide scalingLinus Walleij
The manual for the HSCDTD008A gives us a scaling for the three axis as +/- 2.4mT (24 Gauss) per axis. The manual for the AMI305 and AMI306 gives us a scaling for the three axis as +/- 12 Gauss per axis. Tests with the HSCDTD008A sensor, cat the raw values: $ cat in_magn_*_raw raw 45 189 -19 The scaling factor in in_magn_*_scale is 0.001464843, which gives: 0.065 Gauss 0.277 Gauss -0.027 Gauss The earths magnetic field is in the range of 0.25 to 0.65 Gauss on the surface according to Wikipedia, so these seem like reasonable values. Again we are guessing that the AK8974 has a 12 bit ADC, based on the similarity with AMI305 and AMI306. Cc: Nick Reitemeyer <nick.reitemeyer@web.de> Cc: Stephan Gerhold <stephan@gerhold.net> Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-05-03iio: magnetometer: ak8974: Break out measurementLinus Walleij
This breaks out the measurement code to its own function so we can handle this without swirling it up with the big switch() statement inside ak8974_read_raw(). Keep a local s16 helper variable for the signed value coming out of the measurement before assigning it to the integer *val. The local variable makes the code easier to read and the compiler will optimize it if possible. Cc: Nick Reitemeyer <nick.reitemeyer@web.de> Cc: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-05-03iio: magnetometer: ak8974: Correct realbitsLinus Walleij
The HSCDTD008A has 15 bits of actual ADC valie, and the AMI305 and AMI306 has 12 bits. Correct this by providing an extra parameter to the channel macro and define a separate set of channels for each variant of the chip. The resolution is the actual resolution of the internal ADC of the chip. The values are stored in a S16 in 2's complement so all 16 bits are used for storing (no shifting needed). The AMI305, AMI306 and HSCDTD008A valid bits are picked from respective datasheet. My best educated guess is that AK8974 is also 12 bits. The AK8973 is an 8 bit and earlier version, and the sibling drivers AMI305 and AMI306 are 12 bits, so it makes sense to assume that the AK8974 is also 12 bits. Cc: Nick Reitemeyer <nick.reitemeyer@web.de> Cc: Stephan Gerhold <stephan@gerhold.net> Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-05-03iio: magnetometer: ak8974: add Alps hscdtd008aNick Reitemeyer
The hscdtd008a is similar to the AK8974: Only the whoami value and some registers are different. Signed-off-by: Nick Reitemeyer <nick.reitemeyer@web.de> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Tested-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-05-03iio: magnetometer: rm3100: Use get_unaligned_be24()Andy Shevchenko
This makes the driver code slightly easier to read. Cc: Song Qiang <songqiang1304521@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-04-23Merge tag 'iio-for-5.8a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First set of new IIO device support, features and cleanup for the 5.8 cycle Usual mix of new drivers, new support in old drivers and lots of minor cleanup. Yaml conversions also continue to trickle in (plenty more to go!) New device support * ad7476 - Add ad7091 support (ID only) * ad9467 - New driver for this 200/250 MSPS adi-axi-adc and SPI attached ADC. * adi-axi-adc - New driver to support ADIs generic AXI ADC IP core, used to provide high speed interfaces to ADCs (JESD204B/C or parallel interfaces). Usually paired with a device using a slow configuration interface (spi etc) Includes DT bindings and some fixes for fpga headers. * bmg160 - Add support for BMI088 (ID only) * max1241 - New driver for this ADC. * st_sensors - Add support for LIS2HH12 accelerometer * sx9310 - New driver supporting sx9310 and sx9311 proximity sensors. Yaml DT binding conversions * rockchip-saradc (including adding some missing parts) * stm32-dac * tsl2563 * vcnl4000 Features * st_lsm6dsx - Add LIS3MDL as a possible sensor hub device. * vcnl4000 - Add new concept of near level (from DT) to provide to userspace which often needs to have some calibrated concept of 'near'. Cleanups, minor fixes etc. * core - Use snprintf for functions where strings are built and there is potential for overflow. - Correct docs to indicate mlock should not be used directly by drivers. - Fix up accidental dropping of a patch to use bitmap_zalloc. - Stop allowing enabling of buffers with no channels enabled. - Drop unused 'stufftoread' from iio_buffer. - Drop scan_el_attrs form iio_buffer as unused. - Reorder sanity checks in __iio_device_register to fail earlier. - Drop all the devm_ runregister / free functions from IIO as they were never used and encourage poor design. * dma-buffer - Tidy up includes. * dma-engine-buffer - Provide dev-managed allocator. - Fix an issue with printing a size_t * cross subsystem (kxsd9, bmg160, mpu3050, bmi160, mpu6050, bmc150) - Replace some unnecessary casts of error ptrs and whilst there. use the %pe printf parameter to print them in a more useful fashion. * cross subsystem - Drop casts in calls to regmap_bulk_read as they make no sense. - Use devm_platform_ioremap_resource to reduce boilerplate. - Fix typos in Analog Devices. * counters/104-quad - Add Syed Nayyar Waris as an additional maintainer. * ad7476 - Generate CONVST signal internally rather than requiring external trigger. Add sysfs read back as can now do so. - use devm_add_action_or_reset to tidy up error and remove handling. * ad7793 - Switch to read_avail from explicit attribute. Mostly done to avoid confusing people with a - sign (without surounding spaces) that was correct but checkpatch didn't like. * adis library - Add missing newlines at end of error messages. * adis16400 - Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR. * adis16460 - Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR. * ad_sigma_delta - Move some channel definitions into individual drivers to avoid having to deal with complex options. * ak8974 - Silence an error on deffered probe. * bmp280 - Harden against IRQ before registration. - Convert to read_avail instead of opencoding the equivalent. - Explicitly mark GPIO as optional. - Cleanup casts. - Remove line breaks from strings. * htts221 - Replace direct access to platform_data with dev_get_platdata(). - Use device properties rather than device tree ones to allow ACPI probing. - Casting cleanups. * intel_mrfld_adc - Don't use unaligned accessor for aligned data. * isl29125 - Reorder buer pre and post hooks to allow for coming core rework. * ltc2983 - Remove comp to bool. * max1363 - Stop using mlock from the iio_dev directly in favour of a local lock with clearly defined scope. * max30100 - Use generic device properties to allow ACPI probe. * mpu6050 - Convert to i2c_new_client_device. - Add debugfs register access. * st_lsm6dsx - Provide means of configuring full scale on slave device if supported. - Drop include of st_sensors header to get one value. Its not otherwise used by this driver. * st-sensors - Replace direct access to platform_data with dev_get_platdata(). - Casting cleanups. - Avoid splitting strings. * st_uvis25 - Casting cleanups. * tsl2563 - Typo fix. * tsl2772 - scnprintf in a non obvious string building usecase. Note also 'fixes' a wrong calculation of remaining space that couldn't actually cause any trouble as there was lots of room. * xilinx-xadc - Fix Lars-Peter spelling his own name wrong :) + additional typos. * tag 'iio-for-5.8a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (101 commits) iio: magnetometer: ak8974: Silence deferred-probe error Documentation: ABI: document IIO in_proximity_nearlevel file iio: vcnl4000: Export near level property for proximity sensor dt-bindings: iio: light: vcnl4000: Add proximity-near-level dt-bindings: iio: Introduce common properties for iio sensors dt-bindings: iio: vcnl4000: convert bindings to YAML format iio: Fix misspellings of "Analog Devices" iio: light: isl29125: fix iio_triggered_buffer_{predisable,postenable} positions iio: adc: fsl-imx25-gcq: Use devm_platform_ioremap_resource iio: adc: at91-adc: Use devm_platform_ioremap_resource iio: adc: sun4i-gpadc-iio: Use devm_platform_ioremap_resource iio:light:ltr501: Drop unnecessary cast of parameter in regmap_bulk_read iio:magn:mmc35240: Drop unnecessary casts of val parameter in regmap_bulk* iio:imu:mpu6050: Tidy up parameters to regmap_bulk functions. iio:chemical:bme680: Tidy up parameters to regmap_bulk_read iio:chemical:atlas-sensor: Drop unnecessary explicit casts in regmap_bulk_read calls iio:accel:mxc4005: Drop unnecessary explicit casts in regmap_bulk_read calls iio: imu: st_lsm6dsx: drop huge include in sensor-hub driver iio: buffer: drop devm_iio_kfifo_free() API call iio: buffer: drop devm_iio_hw_consumer_free() API call ...
2020-04-19iio: magnetometer: ak8974: Silence deferred-probe errorDmitry Osipenko
It's not uncommon that voltage regulator becomes available later during kernel's boot process. This patch adds info message about unavailable regulators in a case of the deferred-probe error and also amends the error message with a error code. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-04-19iio:magn:mmc35240: Drop unnecessary casts of val parameter in regmap_bulk*Jonathan Cameron
Given the parameter is void *, casting to u8 * is unnecessary. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Daniel Baluta <daniel.baluta@gmail.com> Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2020-04-19iio: magn: bmc150: Use vsprintf extension %pe for symbolic error nameNishant Malpani
Utilize %pe format specifier from vsprintf while printing error logs with dev_err(). Discards the use of unnecessary explicit casting and prints symbolic error name which might prove to be convenient during debugging. Signed-off-by: Nishant Malpani <nish.malpani25@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-21iio: st_sensors: Drop unneeded explicit castingsAndy Shevchenko
In few places the unnecessary explicit castings are being used. Drop them for good. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-02-21iio: magnetometer: ak8974: Fix negative raw values in sysfsStephan Gerhold
At the moment, reading from in_magn_*_raw in sysfs tends to return large values around 65000, even though the output of ak8974 is actually limited to ±32768. This happens because the value is never converted to the signed 16-bit integer variant. Add an explicit cast to s16 to fix this. Fixes: 7c94a8b2ee8c ("iio: magn: add a driver for AK8974") Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Linus Waleij <linus.walleij@linaro.org> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-01-18iio: magnetometer: ak8975: Convert to use device_get_match_data()Andy Shevchenko
Convert to use device_get_match_data() instead of open coded variant. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-01-18iio: magnetometer: ak8975: Get rid of platform dataAndy Shevchenko
Since IIO framework supports device property API and driver has been moved already to the use of GPIO descriptors the logical continuation is to get rid of platform data completely. We are on the safe side here since there are no users of it in the kernel. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-01-13iio: st_sensors: Make use of device propertiesAndy Shevchenko
Device property API allows to gather device resources from different sources, such as ACPI. Convert the drivers to unleash the power of device property API. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-01-13iio: st_sensors: Drop redundant parameter from st_sensors_of_name_probe()Andy Shevchenko
Since we have access to the struct device_driver and thus to the ID table, there is no need to supply special parameters to st_sensors_of_name_probe(). Besides that we have a common API to get driver match data, there is no need to do matching separately for OF and ACPI. Taking into consideration above, simplify the ST sensors code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-12-15iio: ak8975: Convert to use GPIO descriptorLinus Walleij
The end-of-conversion (EOC) GPIO line is better to grab using a GPIO descriptor. We drop the pdata for this: clients using board files can use machine descriptor tables to pass this GPIO from static data. Cc: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-10-27iio: st: Drop GPIO includeLinus Walleij
None of the ST sensor drivers use any symbols from <linux/gpio.h>, just drop the include from all of them. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-08-11iio:st_sensors: remove buffer allocation at each buffer enableDenis Ciocca
This patch is removing the buffer allocation at each buffer enable. We just allocate enough memory in the main structure during probe to cover maximum size needed (that anyway is pretty small) [16bytes]. Signed-off-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-08-05iio: remove get_irq_data_ready() function pointer and use IRQ number directlyDenis Ciocca
Not even sure why it was there since the beginning. Just use IRQ number in the sensor_data struct. Signed-off-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-08-05iio:magn: preenable/postenable/predisable fixup for ST magn bufferDenis Ciocca
This patch is trying to cleanup for good the buffers operation functions. Let's rename the goto label using operation to perform and not where it fails. Not stable material as not fixing a 'bug' but rather bringing the driver in line with general 'patterns' to allow a subsystem wide cleanup. Signed-off-by: Denis Ciocca <denis.ciocca@st.com> Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-07-27iio: magnetometer: mmc35240: Fix a typo in the name of a constantChristophe JAILLET
Everything is about mmc35240_ except MMC53240_WAIT_SET_RESET (3 and 5 switched). This is likely a typo. Define and use MMC35240_WAIT_SET_RESET instead. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-07-27iio: make st_sensors drivers use regmapDenis Ciocca
This patch is meant to replace the i2c/spi transfer functions with regmap. SPI framework requires DMA safe buffers so let's add GFP_DMA flag for memory allocation used by bulk_read functions. Signed-off-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-07-27iio: move 3-wire spi initialization to st_sensors_spiDenis Ciocca
Some devices need to be configured with special bit in order to use spi 3-wire. This was done during device identification phase. Instead, let's move this part as spi specific. Doing this the check_device_support function becomes a simple device id check, so let's rename it. Signed-off-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-07-27iio:magn: device settings are set immediately during probeDenis Ciocca
This patch set magn settings right after probe start. This is done in preparation of regmap that needs different configuration based on multiread bit value. Signed-off-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-07-27iio:magn: introduce st_magn_get_settings() functionDenis Ciocca
The function is introduced to retrieve magn device settings. It will be used by probe in order to configure regmap. Signed-off-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 335Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin st fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 111 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.567572064@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 330Thomas Gleixner
Based on 1 normalized pattern(s): this file is subject to the terms and conditions of version 2 of the gnu general public license see the file copying in the main directory of this archive for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 55 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.108941081@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 263 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 177Thomas Gleixner
Based on 1 normalized pattern(s): licensed under the gpl 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 135 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528170026.071193225@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 1Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin street fifth floor boston ma 02110 1301 usa this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option [no]_[pad]_[ctrl] any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin street fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 176 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154040.652910950@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier for more missed filesThomas Gleixner
Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-04iio: hmc5843: fix potential NULL pointer dereferencesKangjie Lu
devm_regmap_init_i2c may fail and return NULL. The fix returns the error when it fails. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04iio: ak8975: improve code readabilityH. Nikolaus Schaller
- use temporary variable in get_mount_matrix() - remove , after { } Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04iio: magnetometer: hmc5843: add mount matrix supportH. Nikolaus Schaller
This patch allows to read a mount-matrix device tree property and report to user-space or in-kernel iio clients. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04iio: magnetometer: bmc150: add mount matrix supportH. Nikolaus Schaller
This patch allows to read a mount-matrix device tree property and report to user-space or in-kernel iio clients. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04iio: Allow to read mount matrix from ACPIAndy Shevchenko
Currently mount matrix is allowed in Device Tree, though there is no technical issue to extend it to support ACPI. Convert the function to use device_property_read_string_array() and thus allow to read mount matrix from ACPI if available. Example of use in _DSD method: Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () { "mount-matrix", Package() { "1", "0", "0", "0", "0.866", "0.5", "0", "-0.5", "0.866", } }, } }) At the same time drop the "of" prefix from its name and convert current users. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-01-12iio: magnetometer: mag3110: add vdd/vddio regulator operation supportAnson Huang
The magnetometer's power supplies could be controllable on some platforms, such as i.MX6Q-SABRESD board, the mag3110's power supplies are controlled by a GPIO fixed regulator, need to make sure the regulators are enabled before any communication with mag3110, this patch adds vdd/vddio regulator operation support. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-12-13Merge tag 'iio-for-4.21b' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of IIO new device support, features and cleanups for the 4.21 cycle. Staging graduation * ad2s90 - Driver for this resolver to digital chip. New drivers and device support. * ad5686 - Add support for ad5310r DAC and associated fix in value read back. * exynos-adc - Support for S5PV210 which is slightly different from other parts. * mcp41010 - Driver supporting MCP41010, MCP41050, MCP41100, MCP42010, MCP42050 and MCP42100 microchip potentiometers. New ACPI ids. * ak8975 - AKM9911 ACPI HID. * kxcjk-1013 - KXJ2109 ACPI HID. - KIOX010A ACPI HID. New features * ad5933 - Explicit DT binding. * ad2s90 - Explicit DT binding including dropping spi setup that is done via dt in favour of verifying the settings form DT. * adt7316 - Explicit DT binding and support for gpio, irq_flags etc. * stm32-adc - Runtime power management. Minor fixes and cleanups * core - Protect against missing info structure. * ad2s90 - SPDX - Add documentation fo the mutex. * ad7280a - Check allocation failure. - Fix an accidental replacement of an error return. * adt7316 - Switch some variables to be local and rename for consistency with other drivers. - Revert a false handling of 0 as an error introduced earlier this cycle. * bmi160 - Use devm functions throughout probe() to avoid need for remove(). * hid-sensor-hub - White space cleanup. * hts221 - MAINTAINERS entry. * lis302 - Use generic name in the DT binding doc. * Messon-saradc - Check for allocation error. - Fix some presented clock names that break clk debugfs. * qcom-spmi-adc - A fix for initialization of the prescale property. Came late in the cycle, so merge window is probably the best route for this. * st_lsm6dsx - Allow for variable read length to support wider range of slave devices. * tag 'iio-for-4.21b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (37 commits) iio: adc: qcom-spmi-adc5: Initialize prescale properly dt-bindings: iio: adc: exynos-adc: Add S5PV210 variant iio: adc: Allow selection of Exynos ADC on S5PV210 iio: adc: exynos-adc: Add S5PV210 variant iio: bmi160: use all devm functions in probe iio: dac: ad5686: fix bit shift read register iio:dac:ad5686: Add AD5310R support Revert "Staging: iio: adt7316: Add an extra check for 'ret' equals to 0" dt-bindings: iio: accel: use a generic node name for lis302 iio: core: check 'info' value before registering the device staging: iio: adc: ad7280a: fix overwrite of the returned value staging: iio: adc: ad7280a: check for devm_kasprint() failure iio: humidity: hts221: add entry in MAINTAINERS file iio: magnetometer: ak8975: Add the "AKM9911" ACPI HID staging:iio:ad2s90: Move out of staging staging:iio:ad2s90: Add comment to device state mutex staging:iio:ad2s90: Replace license text w/ SPDX identifier dt-bindings:iio:resolver: Add docs for ad2s90 staging:iio:ad2s90: Add max frequency check at probe staging:iio:ad2s90: Remove spi setup that should be done via dt ...
2018-12-03Merge 4.20-rc5 into staging-nextGreg Kroah-Hartman
We need the staging fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-01iio: magnetometer: ak8975: Add the "AKM9911" ACPI HIDStephan Gerhold
This HID is used on the ASUS MeMO Pad 7 (ME176C) tablet. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-11-16iio: magnetometer: Add driver support for PNI RM3100Song Qiang
PNI RM3100 is a high resolution, large signal immunity magnetometer, composed of 3 single sensors and a processing chip with a MagI2C interface. Following functions are available: - Single-shot measurement from /sys/bus/iio/devices/iio:deviceX/in_magn_{axis}_raw - Triggerd buffer measurement. - DRDY pin for data ready trigger. - Both i2c and spi interface are supported. - Both interrupt and polling measurement is supported, depends on if the 'interrupts' in DT is declared. Signed-off-by: Song Qiang <songqiang1304521@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-11-16iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbersHans de Goede
Before this commit sensor_hub_input_attr_get_raw_value() failed to take the signedness of 16 and 8 bit values into account, returning e.g. 65436 instead of -100 for the z-axis reading of an accelerometer. This commit adds a new is_signed parameter to the function and makes all callers pass the appropriate value for this. While at it, this commit also fixes up some neighboring lines where statements were needlessly split over 2 lines to improve readability. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-11-11iio:magnetometer: st_magn: add BDU settingsMartin Kelly
LIS3MDL and LSM9DS1 are missing BDU settings in their register maps, so add them. I don't have a LIS3MDL sensor to test, but this works correctly on the LSM9DS1, which has the same register map. Signed-off-by: Martin Kelly <martin@martingkelly.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-11-11iio:magnetometer: st_magn: add LSM9DS1 supportMartin Kelly
Update the sensor settings to support the LSM9DS1 sensor. Although the LSM9DS1 accelerometer and gyroscope are coupled together to use the same FIFO, the magnetometer is separate and can be cleanly supported without refactoring the existing driver. Signed-off-by: Martin Kelly <martin@martingkelly.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
generated by cgit (git 2.34.1) at 2024-06-23 23:26:51 +0000