summaryrefslogtreecommitdiff
path: root/drivers/iio/magnetometer
AgeCommit message (Collapse)Author
2024-01-22iio: magnetometer: rm3100: add boundary check for the value read from ↵zhili.liu
RM3100_REG_TMRC Recently, we encounter kernel crash in function rm3100_common_probe caused by out of bound access of array rm3100_samp_rates (because of underlying hardware failures). Add boundary check to prevent out of bound access. Fixes: 121354b2eceb ("iio: magnetometer: Add driver support for PNI RM3100") Suggested-by: Zhouyi Zhou <zhouzhouyi@gmail.com> Signed-off-by: zhili.liu <zhili.liu@ucas.com.cn> Link: https://lore.kernel.org/r/1704157631-3814-1-git-send-email-zhouzhouyi@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-01-17Merge tag 'char-misc-6.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the big set of char/misc and other driver subsystem changes for 6.8-rc1. Other than lots of binder driver changes (as you can see by the merge conflicts) included in here are: - lots of iio driver updates and additions - spmi driver updates - eeprom driver updates - firmware driver updates - ocxl driver updates - mhi driver updates - w1 driver updates - nvmem driver updates - coresight driver updates - platform driver remove callback api changes - tags.sh script updates - bus_type constant marking cleanups - lots of other small driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (341 commits) android: removed duplicate linux/errno uio: Fix use-after-free in uio_open drivers: soc: xilinx: add check for platform firmware: xilinx: Export function to use in other module scripts/tags.sh: remove find_sources scripts/tags.sh: use -n to test archinclude scripts/tags.sh: add local annotation scripts/tags.sh: use more portable -path instead of -wholename scripts/tags.sh: Update comment (addition of gtags) firmware: zynqmp: Convert to platform remove callback returning void firmware: turris-mox-rwtm: Convert to platform remove callback returning void firmware: stratix10-svc: Convert to platform remove callback returning void firmware: stratix10-rsu: Convert to platform remove callback returning void firmware: raspberrypi: Convert to platform remove callback returning void firmware: qemu_fw_cfg: Convert to platform remove callback returning void firmware: mtk-adsp-ipc: Convert to platform remove callback returning void firmware: imx-dsp: Convert to platform remove callback returning void firmware: coreboot_table: Convert to platform remove callback returning void firmware: arm_scpi: Convert to platform remove callback returning void firmware: arm_scmi: Convert to platform remove callback returning void ...
2023-11-25iio: tmag5273: fix temperature offsetJavier Carrasco
The current offset has the scale already applied to it. The ABI documentation defines the offset parameter as "offset to be added to <type>[Y]_raw prior to scaling by <type>[Y]_scale in order to obtain value in the <type> units as specified in <type>[Y]_raw documentation" The right value is obtained at 0 degrees Celsius by the formula provided in the datasheet: T = Tsens_t0 + (Tadc_t - Tadc_t0) / Tadc_res where: T = 0 degrees Celsius Tsens_t0 (reference temperature) = 25 degrees Celsius Tadc_t0 (16-bit format for Tsens_t0) = 17508 Tadc_res = 60.1 LSB/degree Celsius The resulting offset is 16005.5, which has been truncated to 16005 to provide an integer value with a precision loss smaller than the 1-LSB measurement precision. Fix the offset to apply its value prior to scaling. Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net> Link: https://lore.kernel.org/r/9879beec-05fc-4fc6-af62-d771e238954e@wolfvision.net Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: magnetometer: tmag5273: Switch to device_property_match_property_string()Andy Shevchenko
Replace open coded device_property_match_property_string(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230808162800.61651-6-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-05iio: magnetometer: ak8975: Fix 'Unexpected device' errorAndré Apitzsch
Explicity specify array indices to fix mapping between asahi_compass_chipset and ak_def_array. While at it, remove unneeded AKXXXX. Fixes: 4f9ea93afde1 ("iio: magnetometer: ak8975: Convert enum->pointer for data in the match tables") Signed-off-by: André Apitzsch <git@apitzsch.eu> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20231001-ak_magnetometer-v1-1-09bf3b8798a3@apitzsch.eu Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-09-23iio: magnetometer: hid-sensor-magn-3d: Convert to platform remove callback ↵Uwe Kleine-König
returning void The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230919174931.1417681-41-u.kleine-koenig@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-09-11iio: magnetometer: ak8975: Sort ID and ACPI tablesBiju Das
Sort ID table alphabetically by name and ACPI table by HID. While at it, drop blank line before ID table. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230818075600.24277-3-biju.das.jz@bp.renesas.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-09-11iio: magnetometer: ak8975: Convert enum->pointer for data in the match tablesBiju Das
Convert enum->pointer for data in the match tables to simplify the probe() by replacing device_get_match_data() and i2c_client_get_device_id by i2c_get_match_data() as we have similar I2C, ACPI and DT matching table. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230818075600.24277-2-biju.das.jz@bp.renesas.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-09-11iio: magnetometer: yamaha-yas530: Use i2c_get_match_data()Biju Das
Simplify the probe() by replacing device_get_match_data() with i2c_get_match_data(). Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230812065741.20990-2-biju.das.jz@bp.renesas.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-06-15Merge tag 'iio-for-6.5a' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: 1st set of IIO new device support, features and cleanup for the 6.5 cycle. New device support - honeywell,mprls0025pa * New driver and dt-bindings for this series of pressure sensors. - invensense,mpu6050 * Add support for ICM 20600 IMU (ID, bindings and device data). - melexis,mlx90614 * Add support for mlx90615 Infra Red Thermometer after driver cleanup and refactoring to support the differences in this device. - renesas,x9250 * New driver and bindings for this quad potentiometer. - rockchip,saradc * Add support for RK3588. Also included is a bunch of refactoring and cleanup for that driver. - rohm,bu27008 * New driver bindings etc for this 5 photodiode color sensor. - st,lsm9ds0/st,st-sensors * ID added for LSM303D accelerometer and magnetometer including ACPI binding. - ti,opt4001 * New driver and bindings for this ambient light sensor. Features - core * Introduce iio_validate_own_trigger() for cases where a driver can only consumer a trigger it registered (detected via same parent device). Use it in the kionix,kx022a driver and new rohm,by27008 driver. - dynaimage,al3320a * ACPI binding CALS0001 seen on Lenovo Yoga Table 2 devices. - kionix,kx002a * Enable asynchronous probe. - rohm,bu27034 * Enable asynchronous probe. - ti,tmp006 * Explicit support for DT including binding documentation. Cleanups, minor fixes and misc improvements. - treewide * Switch I2C drivers from probe_new() back to probe() - part of the long process of getting rid of a parameter from probe() * Various whitespace and typo fixes not otherwise called out. - core * industrialio-buffer,Style cleanup. * Add documentation to extend_name field of struct iio_chan_spec to direct people using it towards the label infrastructure instead. extend_name was a design mistake a long time back so directly people away from it may be useful. - adi,ad7606 * Add HAS_IOPORT dependency to prepare for some Kconfig changes. - bosch,bma400 * Drop pointless print of ret in a dev_err_probe() message. - invensense,icm42600 * Rework timestamp handling to reduce jitter. - mediatek,mt7986-auxdac * Add DT binding for this part. - qcom,spmi-vadc * Allow for 1/16th prescaling used on a few devices. * Various changes to channel labeling and naming, including dropping use of fwnode_name which generates odd channel names. Small ABI change as a result, but not thought to be a problem for users of this platform. - st,lsm6dsx * dt-binding: Use common schema for mount-matrix via a reference. - st,stm32 * Add a debug print for when legacy channel config is used. - ti,palmas-adc * Drop unused i2c.h include. * tag 'iio-for-6.5a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (59 commits) dt-bindings: iio: rockchip: Fix 'oneOf' condition failed warning dt-bindings: iio: afe: voltage-divider: Spelling s/curcuit/circuit/ dt-bindings: iio: adc: Add rockchip,rk3588-saradc string iio: adc: rockchip_saradc: Use dev_err_probe iio: adc: rockchip_saradc: Match alignment with open parenthesis iio: adc: rockchip_saradc: Use of_device_get_match_data iio: adc: rockchip_saradc: Make use of devm_clk_get_enabled iio: adc: rockchip_saradc: Add support for RK3588 iio: adc: rockchip_saradc: Add callback functions iio: temperature: tmp006: Add OF device matching support dt-bindings: iio: temperature: Add support for tmp006 staging: iio: Switch i2c drivers back to use .probe() iio: amplifiers: ad8366 Fix whitespace issue iio: imu: inv_icm42600: avoid frequent timestamp jitter MAINTAINERS: Add ROHM BU27008 iio: light: ROHM BU27008 color sensor iio: kx022a: Use new iio_validate_own_trigger() iio: trigger: Add simple trigger_validation helper dt-bindings: iio: light: ROHM BU27008 iio: mlx90614: Add MLX90615 support ...
2023-05-21iio: Switch i2c drivers back to use .probe()Uwe Kleine-König
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230515205048.19561-1-u.kleine-koenig@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13iio: magnetometer: st_accel: Add LSM303DMarius Hoch
The lsm303d has the same register mapping as the lsm9ds0, thus we can just re-use that. Tested on a Lenovo Yoga Tablet 2 1051-F. Signed-off-by: Marius Hoch <mail@mariushoch.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Hans de Goede <hansg@kernel.org> Link: https://lore.kernel.org/r/20230415231130.115094-3-mail@mariushoch.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13iio: tmag5273: Fix runtime PM leak on measurement errorLars-Peter Clausen
The tmag5273 gets a runtime PM reference before reading a measurement and releases it when done. But if the measurement fails the tmag5273_read_raw() function exits before releasing the reference. Make sure that this error path also releases the runtime PM reference. Fixes: 866a1389174b ("iio: magnetometer: add ti tmag5273 driver") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Gerald Loacker <gerald.loacker@wolfvision.net> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230414013752.498767-1-lars@metafoo.de Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-08iio: magnetometer: st_magn: Add LSM303CStephan Gerhold
The magnetometer part of ST LSM303C is similar (perhaps even identical) to the already supported standalone LIS3MDL magnetometer, so just add the new st,lsm303c-magn compatible for the existing definitions. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230106102239.9647-4-stephan@gerhold.net Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-12-28iio: magnetometer: add ti tmag5273 driverGerald Loacker
Add support for TI TMAG5273 Low-Power Linear 3D Hall-Effect Sensor. Additionally to temperature and magnetic X, Y and Z-axes the angle and magnitude are reported. The sensor is operating in continuous measurement mode and changes to sleep mode if not used for 5 seconds. Datasheet: https://www.ti.com/lit/gpn/tmag5273 Signed-off-by: Gerald Loacker <gerald.loacker@wolfvision.net> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221201072220.402585-4-gerald.loacker@wolfvision.net Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: magnetometer: yamaha-yas530: Convert to i2c's .probe_new()Uwe Kleine-König
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-160-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: magnetometer: mmc35240: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-159-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: magnetometer: mag3110: Convert to i2c's .probe_new()Uwe Kleine-König
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-158-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: magnetometer: hmc5843: Convert to i2c's .probe_new()Uwe Kleine-König
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-157-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: magnetometer: bmc150_magn_i2c: Convert to i2c's .probe_new()Uwe Kleine-König
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-156-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: magnetometer: ak8975: Convert to i2c's .probe_new()Uwe Kleine-König
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-155-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: magnetometer: ak8974: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-154-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: accel: st_magn: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221023132302.911644-23-u.kleine-koenig@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-10-08Merge tag 'char-misc-6.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the large set of char/misc and other small driver subsystem changes for 6.1-rc1. Loads of different things in here: - IIO driver updates, additions, and changes. Probably the largest part of the diffstat - habanalabs driver update with support for new hardware and features, the second largest part of the diff. - fpga subsystem driver updates and additions - mhi subsystem updates - Coresight driver updates - gnss subsystem updates - extcon driver updates - icc subsystem updates - fsi subsystem updates - nvmem subsystem and driver updates - misc driver updates - speakup driver additions for new features - lots of tiny driver updates and cleanups All of these have been in the linux-next tree for a while with no reported issues" * tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits) w1: Split memcpy() of struct cn_msg flexible array spmi: pmic-arb: increase SPMI transaction timeout delay spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes spmi: pmic-arb: correct duplicate APID to PPID mapping logic spmi: pmic-arb: add support to dispatch interrupt based on IRQ status spmi: pmic-arb: check apid against limits before calling irq handler spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq spmi: pmic-arb: handle spurious interrupt spmi: pmic-arb: add a print in cleanup_irq drivers: spmi: Directly use ida_alloc()/free() MAINTAINERS: add TI ECAP driver info counter: ti-ecap-capture: capture driver support for ECAP Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items dt-bindings: counter: add ti,am62-ecap-capture.yaml counter: Introduce the COUNTER_COMP_ARRAY component type counter: Consolidate Counter extension sysfs attribute creation counter: Introduce the Count capture component counter: 104-quad-8: Add Signal polarity component counter: Introduce the Signal polarity component counter: interrupt-cnt: Implement watch_validate callback ...
2022-09-04iio: magnetometer: yamaha-yas530: Use dev_err_probe()Andy Shevchenko
Unify error message format by using dev_err_probe(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220831141530.80572-3-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-04iio: magnetometer: yamaha-yas530: Make strings const in chip infoAndy Shevchenko
For better compiler coverage mark strings consts in the chip info. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220831141530.80572-2-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-04iio: magnetometer: yamaha-yas530: Use pointers as driver dataAndy Shevchenko
Unify ID tables to use pointers for driver data. It will allow to simplify the driver later on. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220831141530.80572-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-16i2c: Make remove callback return voidUwe Kleine-König
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-15iio: magnetometer: yas530: Add YAS537 variantJakob Hauser
Add support for the magnetometer Yamaha YAS537. The additions are based on comparison of Yamaha Android kernel drivers for YAS532 [1] and YAS537 [2]. In the Yamaha YAS537 Android driver, there is an overflow/underflow control implemented. For regular usage, this seems not necessary. A similar overflow/ underflow control of Yamaha YAS530/532 Android driver isn't integrated in the mainline driver. It is therefore skipped for YAS537 in the mainline too. Also in the Yamaha YAS537 Android driver, at the end of the reset_yas537() function, a measurement is saved in "last_after_rcoil". Later on, this is compared to current measurements. If the difference gets too big, a new reset is initialized. The difference in measurements needs to be quite big, it's hard to say if this is necessary for regular operation. Therefore this isn't integrated in the mainline driver either. [1] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/GT-I9195I/drivers/iio/magnetometer/yas_mag_drv-yas532.c [2] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/GT-I9195I/drivers/iio/magnetometer/yas_mag_drv-yas537.c Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/264c6488733a5c32089c9ab406a5bcb808c48fef.1660337264.git.jahau@rocketmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15iio: magnetometer: yas530: Add function pointers to "chip_info"Jakob Hauser
Add function pointers to the "chip_info" structure to ease the handling of different YAS variants. In the function yas5xx_probe(), the function call for "measure_offsets" was added as a conditional "if (ci->measure_offsets)". This is a preparatory step for YAS537, as this variant doesn't need an offset measurement. Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/4bd3f96262e0132b7f9720521a801da3c18abd95.1660337264.git.jahau@rocketmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15iio: magnetometer: yas530: Add temperature calculation to "chip_info"Jakob Hauser
Add temperature calculation to the "chip_info" structure to ease the handling of different YAS variants. Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/1a8bffdb7e807455620a73f2d61981e7f9aab8d5.1660337264.git.jahau@rocketmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15iio: magnetometer: yas530: Add IIO scaling to "chip_info"Jakob Hauser
Add IIO scaling to the "chip_info" structure to ease the handling to different YAS variants. Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/a12f892633bbee13a8856c231dc793ebbc5d3a03.1660337264.git.jahau@rocketmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15iio: magnetometer: yas530: Add volatile registers to "chip_info"Jakob Hauser
Add volatile registers to the "chip_info" structure to ease the handling of different YAS variants. Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/aeba3877933ba9d2c920b459a9037d9186c15a4f.1660337264.git.jahau@rocketmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15iio: magnetometer: yas530: Introduce "chip_info" structureJakob Hauser
Introduce the "chip_info" structure approach for better variant handling. The variant to be used is now chosen by the Device Tree (enum "chip_ids"), not by the chip ID in the register. However, there is a check to make sure they match (using integer "id_check"). Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/57236545107286771d351b95091bf56815d3717d.1660337264.git.jahau@rocketmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15iio: magnetometer: yas530: Apply documentation and style fixesJakob Hauser
This commit gathers several minor changes. In the device examples, "Xiaomi" is too generic, specific devices should be listed here. E.g. Xiaomi Redmi 2 seems to have YAS537 but it's not fully clear if this applies to all its variants. Samsung Galaxy S7 is often quoted in conjunction with YAS537. Removed defines for device IDs of YAS537 and YAS539, they are not needed so far. Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/300e394a76eb30fa031ecb69b594e9f9a70dac42.1660337264.git.jahau@rocketmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15iio: magnetometer: yas530: Move printk %*ph parameters out from stackJakob Hauser
Use less stack by modifying %*ph parameters. While at it, in the function yas530_get_calibration_data(), the debug dump was extended to 16 elements as this is the size of the calibration data array of YAS530. Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/93b50c20adb1b2acb4cddb1ab25755070edd7c07.1660337264.git.jahau@rocketmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15iio: magnetometer: yas530: Rename functions and registersJakob Hauser
This is a preparation for adding the YAS537 variant. Functions that are used only by YAS530, YAS532 and YAS533 are renamed from yas5xx to yas530. Same for the registers. To avoid part listing in function and registers names, the name of the first variant is used. Where appropriate, comments were added that these functions are used by more than one variant. Functions that will be used by all variants including YAS537 remain in the naming scheme yas5xx. Or YAS5XX for registers, respectively. Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/344d3b2f5e050eab79ce9962c24781486774d9fb.1660337264.git.jahau@rocketmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15iio: magnetometer: yas530: Change data type of calibration coefficientsJakob Hauser
This is a preparation for adding YAS537 variant. YAS537 uses other data types on the calibration coefficients [1] than YAS530 [2] and YAS532 [3]. On YAS537, at least for a4 and a7 this could matter because 8-bit unsigned data from the register gets stored into a signed data type, therefore this should be 8-bit as well. For YAS530/532, on the other hand, it doesn't seem to matter. The size of a2-a9 and k is smaller than 8-bit at extraction, also the applied math is low. And Cx/Cy1/Cy2, now being defined as signed 16-bit, are extracted as unsigned 8-bit and undergo only minor math. [1] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/GT-I9195I/drivers/iio/magnetometer/yas_mag_drv-yas537.c#L76-L78 [2] https://github.com/NovaFusion/android_kernel_samsung_golden/blob/cm-12.1/drivers/sensor/compass/yas_mag_driver-yas530.c#L526-L527 [3] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/GT-I9195I/drivers/iio/magnetometer/yas_mag_drv-yas532.c#L76-L77 Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/f1e53bd6672aebe59f9b236b41374482edf888f8.1660337264.git.jahau@rocketmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15iio: magnetometer: yas530: Correct temperature handlingJakob Hauser
The raw temperature value is a number of counts from a certain starting point. The resolution of the temperature counts is different for the YAS variants. Temperature compensation for YAS532 version AC seems to be handled differently. It uses the deviation from 20 degree Celsius [1] whereas YAS530 and older versions of YAS532 apply solely the t value as a multiplier [2][3]. In funtion yas5xx_read_raw(), add case IIO_CHAN_INFO_PROCESSED. Remove scale of temperature as this isn't applied. Additionally correct sign of temperature channel in iio_chan_spec. It's already defined that way in the yas5xx_get_measure() function. [1] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/GT-I9195I/drivers/iio/magnetometer/yas_mag_drv-yas532.c#L442 [2] https://github.com/NovaFusion/android_kernel_samsung_golden/blob/cm-12.1/drivers/sensor/compass/yas_mag_driver-yas530.c#L881-L883 [3] https://github.com/LineageOS/android_kernel_samsung_msm8930-common/blob/lineage-18.1/drivers/sensors/geomagnetic/yas_mag_driver-yas53x.c#L856-L858 Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/eb45f328c7a81eb622c6a8cfc5c468ea58bbdace.1660337264.git.jahau@rocketmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15iio: magnetometer: yas530: Correct scaling of magnetic axesJakob Hauser
Looks like YAS530 raw values return picotesla and YAS532 nanotesla. Adapt comments and scaling. Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/053ab05cb9a0f6b0536ab5e0de57009f513c6f81.1660337264.git.jahau@rocketmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15iio: magnetometer: yas530: Change range of data in volatile registerJakob Hauser
In function yas5xx_volatile_reg(), register "YAS5XX_MEASURE_DATA + 8" shouldn't be volatile as we count from 0 to 7 here. Instead of lowering the number from 8 to 7, the operator "<=" is replaced by "<". The size of the measure data array is 8, therefore it's more natural to use 8 as a constant. This change is of low importance as the "+ 8" register isn't called. Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/dabba10feb80171350525ac874f944076c46e084.1660337264.git.jahau@rocketmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15iio: magnetometer: yas530: Change data type of hard_offsets to signedJakob Hauser
The "hard_offsets" are currently unsigned u8 but they should be signed as they can get negative. They are signed in function yas5xx_meaure_offsets() and in the Yamaha drivers [1][2]. [1] https://github.com/NovaFusion/android_kernel_samsung_golden/blob/cm-12.1/drivers/sensor/compass/yas.h#L156 [2] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/GT-I9195I/drivers/iio/magnetometer/yas_mag_drv-yas532.c#L91 Fixes: de8860b1ed47 ("iio: magnetometer: Add driver for Yamaha YAS530") Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/40f052bf6491457d0c5c0ed4c3534dc6fa251c3c.1660337264.git.jahau@rocketmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15iio: magn: hmc5843: Move struct dev_pm_ops out of headerJonathan Cameron
Having this structure defined static in the header lead to unnecessary duplication and required additional symbol exports. Use the EXPORT_NS_SIMPLE_DEV_PM_OPS() to clean this up in the same fashion as many other drivers do this. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220807184534.1037363-3-jic23@kernel.org
2022-08-15iio: magn: hmc5843: Drop excessive indentation of assignments of hmc5843_driverJonathan Cameron
This formatting is odd, so fix it to be more standard. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220807184534.1037363-2-jic23@kernel.org
2022-07-18iio: magnetometer: hmc5843: Remove duplicate 'the'Jiang Jian
Fix an obvious typing error, found by spellcheck(1). Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com> Link: https://lore.kernel.org/r/20220622035925.5008-1-jiangjian@cdjrlc.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-07-18iio: magn: yas530: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macrosJonathan Cameron
Using these new macros allows the compiler to remove the unused dev_pm_ops structure and related functions if !CONFIG_PM without the need to mark the functions __maybe_unused. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20220621202719.13644-37-jic23@kernel.org
2022-07-18iio: magnetometer: ak8974: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macrosJonathan Cameron
Using these new macros allows the compiler to remove the unused dev_pm_ops structure and related functions if !CONFIG_PM without the need to mark the functions __maybe_unused. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20220621202719.13644-36-jic23@kernel.org
2022-07-16iio: magnetometer: rm3100: do not explicity set INDIO_BUFFER_TRIGGERED modeMarcus Folkesson
The core sets INDIO_BUFFER_TRIGGERED as part of devm_iio_triggered_buffer_setup(). Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Link: https://lore.kernel.org/r/20220702085005.31666-1-marcus.folkesson@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-07-14Merge tag 'iio-for-5.20a' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: IIO new device support, features and minor fixes for 5.20 Several on-running cleanup efforts dominate this time, plus the DMA safety alignment issue identified due to improved understanding of the restrictions as a result of Catalin Marinas' efforts in that area. One immutable branch in here due to MFD and SPMI elements needed for the qcom-rradc driver. Device support * bmi088 - Add support for bmi085 (accelerometer part of IMU) - Add support for bmi090l (accelerometer part of IMU) * mcp4922 - Add support for single channel device MCP4921 * rzg2l-adc - Add compatible and minor tweaks to support RZ/G2UL ADC * sca3300 - Add support for scl3300 including refactoring driver to support multiple device types and cleanup noticed whilst working on driver. * spmi-rradc - New driver for Qualcomm SPMI Round Robin ADC including necessary additional utility functions in SPMI core and related MFD driver. * ti-dac55781 - Add compatible for DAC121C081 which is very similar to existing parts. Features * core - Warn on iio_trigger_get() on an unregistered IIO trigger. * bma400 - Triggered buffer support - Activity and step counting - Misc driver improvements such as devm and header ordering * cm32181 - Add PM support. * cros_ec - Sensor location support * sx9324 - Add precharge resistor setting - Add internal compensation resistor setting - Add CS idle/sleep mode. * sx9360 - Add precharge resistor setting * vl53l0x - Handle reset GPIO, regulator and relax handling of irq type. Cleanup and minor fixes: Treewide changes - Cleanup of error handling in remove functions in many drivers. - Update dt-binding maintainers for a number of ADI bindings. - Several sets of conversion of drivers from device tree specific to generic device properties. Includes fixing up various related header and Kconfig issues. - Drop include of of.h from iio.h and fix up drivers that need to include it directly. - More moves of clusters of drivers into appropriate IIO_XXX namespaces. - Tree wide fix of a long running bug around DMA safety requirements. IIO was using __cacheline_aligned to pad iio_priv() structures. This worked for a long time by coincidence, but correct alignment is ARCH_KMALLOC_MINALIGN. As there is activity around this area, introduce an IIO local IIO_DMA_MINALIGN to allow for changing it in one place rather than every driver in future. Note, there have been no reports of this bug in the wild, and it may not happen on any platforms supported by upstream, so no rush to backport these fixes. Other cleanup * core - Switch to ida_alloc()/free() - Drop unused iio_get_time_res() - Octal permissions and DEVICE_ATTR_* macros. - Cleanup bared unsigned usage. * MAINTAINERS - Add include/dt-bindings/iio/ to the main IIO entry. * ad5380 - Comment syntax fix. * ad74413r - Call to for_each_set_bit_from(), with from value as 0 replaced. * ad7768-1 - Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core. * adxl345 - Fix wrong address in dt-binding example. * adxl367 - Drop extra update of FIFO watermark. * at91-sama5d2 - Limit requested watermark to the hwfifo size. * bmg160, bme680 - Typos * cio-dac - Switch to iomap rather than direct use of ioports * kxsd9 - Replace CONFIG_PM guards with new PM macros that let the compiler cleanly remove the unused code and structures when !CONFIG_PM * lsm6dsx - Use new pm_sleep_ptr() and EXPORT_SIMPLE_DEV_PM_OPS(). Then move to Namespace. * meson_saradc - general cleanup. - Avoid attaching resources to iio_dev->dev - Use same struct device for all error messages - Convert to dev_err_probe() and use local struct device *dev to reduce code complexity. - Use devm_clk_get_optional() instead of hand rolling. - Use regmap_read_poll_timeout() instead of hand rolling. * mma7660 - Drop ACPI_PTR() use that is unhelpful. * mpu3050 - Stop exporting symbols not used outside of module - Switch to new DEFINE_RUNTIME_DEV_PM_OPS() macro and move to Namespace. * ping - Typo fix * qcom-spmi-rradc - Typo fix * sc27xx - Convert to generic struct u32_fract * srf08 - Drop a redundant check on !val * st_lsm6dsx - Limit the requested watermark to the hwfifo size. * stm32-adc - Use generic_handle_domain_irq() instead of opencoding. - Fix handling of ADC disable. * stm32-dac - Use str_enabled_disable() instead of open coding. * stx104 - Switch to iomap rather than direct use of ioports * tsc2046 - Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core. * tsl2563 - Replace flush_scheduled_work() with cancel_delayed_work_sync() - Replace cancel_delayed_work() with cancel_delayed_work_sync() * vl53l0x - Make the VDD regulator optional by allowing a dummy regulator. * tag 'iio-for-5.20a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (244 commits) iio: adc: xilinx-xadc: Drop duplicate NULL check in xadc_parse_dt() iio: adc: xilinx-xadc: Make use of device properties iio: light: cm32181: Add PM support iio: adc: ad778-1: do not explicity set INDIO_BUFFER_TRIGGERED mode iio: adc: ti-tsc2046: do not explicity set INDIO_BUFFER_TRIGGERED mode iio: adc: stm32-adc: disable adc before calibration iio: adc: stm32-adc: make safe adc disable iio: dac: ad5380: align '*' each line and drop unneeded blank line iio: adc: qcom-spmi-rradc: Fix spelling mistake "coherrency" -> "coherency" iio: Don't use bare "unsigned" dt-bindings: iio: dac: mcp4922: expand for mcp4921 support iio: dac: mcp4922: add support to mcp4921 iio: chemical: sps30: Move symbol exports into IIO_SPS30 namespace iio: pressure: bmp280: Move symbol exports to IIO_BMP280 namespace iio: imu: bmi160: Move exported symbols to IIO_BMI160 namespace iio: adc: stm32-adc: Use generic_handle_domain_irq() proximity: vl53l0x: Make VDD regulator actually optional MAINTAINERS: add include/dt-bindings/iio to IIO SUBSYSTEM AND DRIVERS dt-bindings: iio/accel: Fix adi,adxl345/6 example I2C address iio: gyro: bmg160: Fix typo in comment ...
2022-06-20Merge tag 'iio-fixes-for-5.19a' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: 1st set of IIO fixes for the 5.19 cycle. Most of these have been in next for a long time. Unfortunately there was one stray patch in the branch (wasn't a fix), so I've just rebased to remove that. * testing - Fix a missing MODULE_LICENSE() warning by restricting possible build configs. * Various drivers - Fix ordering of iio_get_trigger() being called before iio_trigger_register() * adi,admv1014 - Fix dubious x & !y warning. * adi,axi-adc - Fix missing of_node_put() in error and normal paths. * aspeed,adc - Add missing of_node_put() * fsl,mma8452 - Fix broken probing from device tree. - Drop check on return value of i2c write to device to cause reset as ACK will be missing (device reset before sending it). * fsl,vf610 - Fix documentation of in_conversion_mode ABI. * iio-trig-sysfs - Ensure irq work has finished before freeing the trigger. * invensense,mpu3050 - Disable regulators in error path. * invensense,icm42600 - Fix collision of enum value of 0 with error path where 0 is no match. * renesas,rzg2l_Adc - Add missing fwnode_handle_put() in error path. * rescale - Fix a boolean logic bug for detection of raw + scale affecting an obscure corner case. * semtech,sx9324 - Check return value of read of pin_defs * st,stm32-adc: - Fix interaction across ADC instances for some supported devices. - Drop false spurious IRQ messages. - Fix calibration value handling. If we can't calibrate don't expose the vref_int channel. - Fix maximum clock rate for stm32pm15x * ti,ads131e08 - Add missing fwnode_handle_put() in error paths. * xilinx,ams - Fix variable checked for error from platform_get_irq() * x-powers,axp288 - Overide TS_PIN bias current for boards where it is not correctly initialized. * yamaha,yas530 - Fix inverted check on calibration data being all zeros. * tag 'iio-fixes-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (26 commits) iio:proximity:sx9324: Check ret value of device_property_read_u32_array() iio: accel: mma8452: ignore the return value of reset operation iio: adc: stm32: fix maximum clock rate for stm32mp15x iio: adc: stm32: fix vrefint wrong calibration value handling iio: imu: inv_icm42600: Fix broken icm42600 (chip id 0 value) iio: adc: vf610: fix conversion mode sysfs node name iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_client iio: test: fix missing MODULE_LICENSE for IIO_RESCALE=m iio:humidity:hts221: rearrange iio trigger get and register iio:chemical:ccs811: rearrange iio trigger get and register iio:accel:mxc4005: rearrange iio trigger get and register iio:accel:kxcjk-1013: rearrange iio trigger get and register iio:accel:bma180: rearrange iio trigger get and register iio: afe: rescale: Fix boolean logic bug iio: adc: aspeed: Fix refcount leak in aspeed_adc_set_trim_data iio: adc: stm32: Fix IRQs on STM32F4 by removing custom spurious IRQs message iio: adc: stm32: Fix ADCs iteration in irq handler iio: adc: ti-ads131e08: add missing fwnode_handle_put() in ads131e08_alloc_channels() iio: adc: rzg2l_adc: add missing fwnode_handle_put() in rzg2l_adc_parse_properties() iio: trigger: sysfs: fix use-after-free on remove ...
generated by cgit (git 2.34.1) at 2024-05-29 21:21:05 +0000