summaryrefslogtreecommitdiff
path: root/drivers/iio/magnetometer
AgeCommit message (Collapse)Author
2023-06-15Merge tag 'iio-for-6.5a' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: 1st set of IIO new device support, features and cleanup for the 6.5 cycle. New device support - honeywell,mprls0025pa * New driver and dt-bindings for this series of pressure sensors. - invensense,mpu6050 * Add support for ICM 20600 IMU (ID, bindings and device data). - melexis,mlx90614 * Add support for mlx90615 Infra Red Thermometer after driver cleanup and refactoring to support the differences in this device. - renesas,x9250 * New driver and bindings for this quad potentiometer. - rockchip,saradc * Add support for RK3588. Also included is a bunch of refactoring and cleanup for that driver. - rohm,bu27008 * New driver bindings etc for this 5 photodiode color sensor. - st,lsm9ds0/st,st-sensors * ID added for LSM303D accelerometer and magnetometer including ACPI binding. - ti,opt4001 * New driver and bindings for this ambient light sensor. Features - core * Introduce iio_validate_own_trigger() for cases where a driver can only consumer a trigger it registered (detected via same parent device). Use it in the kionix,kx022a driver and new rohm,by27008 driver. - dynaimage,al3320a * ACPI binding CALS0001 seen on Lenovo Yoga Table 2 devices. - kionix,kx002a * Enable asynchronous probe. - rohm,bu27034 * Enable asynchronous probe. - ti,tmp006 * Explicit support for DT including binding documentation. Cleanups, minor fixes and misc improvements. - treewide * Switch I2C drivers from probe_new() back to probe() - part of the long process of getting rid of a parameter from probe() * Various whitespace and typo fixes not otherwise called out. - core * industrialio-buffer,Style cleanup. * Add documentation to extend_name field of struct iio_chan_spec to direct people using it towards the label infrastructure instead. extend_name was a design mistake a long time back so directly people away from it may be useful. - adi,ad7606 * Add HAS_IOPORT dependency to prepare for some Kconfig changes. - bosch,bma400 * Drop pointless print of ret in a dev_err_probe() message. - invensense,icm42600 * Rework timestamp handling to reduce jitter. - mediatek,mt7986-auxdac * Add DT binding for this part. - qcom,spmi-vadc * Allow for 1/16th prescaling used on a few devices. * Various changes to channel labeling and naming, including dropping use of fwnode_name which generates odd channel names. Small ABI change as a result, but not thought to be a problem for users of this platform. - st,lsm6dsx * dt-binding: Use common schema for mount-matrix via a reference. - st,stm32 * Add a debug print for when legacy channel config is used. - ti,palmas-adc * Drop unused i2c.h include. * tag 'iio-for-6.5a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (59 commits) dt-bindings: iio: rockchip: Fix 'oneOf' condition failed warning dt-bindings: iio: afe: voltage-divider: Spelling s/curcuit/circuit/ dt-bindings: iio: adc: Add rockchip,rk3588-saradc string iio: adc: rockchip_saradc: Use dev_err_probe iio: adc: rockchip_saradc: Match alignment with open parenthesis iio: adc: rockchip_saradc: Use of_device_get_match_data iio: adc: rockchip_saradc: Make use of devm_clk_get_enabled iio: adc: rockchip_saradc: Add support for RK3588 iio: adc: rockchip_saradc: Add callback functions iio: temperature: tmp006: Add OF device matching support dt-bindings: iio: temperature: Add support for tmp006 staging: iio: Switch i2c drivers back to use .probe() iio: amplifiers: ad8366 Fix whitespace issue iio: imu: inv_icm42600: avoid frequent timestamp jitter MAINTAINERS: Add ROHM BU27008 iio: light: ROHM BU27008 color sensor iio: kx022a: Use new iio_validate_own_trigger() iio: trigger: Add simple trigger_validation helper dt-bindings: iio: light: ROHM BU27008 iio: mlx90614: Add MLX90615 support ...
2023-05-21iio: Switch i2c drivers back to use .probe()Uwe Kleine-König
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230515205048.19561-1-u.kleine-koenig@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13iio: magnetometer: st_accel: Add LSM303DMarius Hoch
The lsm303d has the same register mapping as the lsm9ds0, thus we can just re-use that. Tested on a Lenovo Yoga Tablet 2 1051-F. Signed-off-by: Marius Hoch <mail@mariushoch.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Hans de Goede <hansg@kernel.org> Link: https://lore.kernel.org/r/20230415231130.115094-3-mail@mariushoch.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13iio: tmag5273: Fix runtime PM leak on measurement errorLars-Peter Clausen
The tmag5273 gets a runtime PM reference before reading a measurement and releases it when done. But if the measurement fails the tmag5273_read_raw() function exits before releasing the reference. Make sure that this error path also releases the runtime PM reference. Fixes: 866a1389174b ("iio: magnetometer: add ti tmag5273 driver") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Gerald Loacker <gerald.loacker@wolfvision.net> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230414013752.498767-1-lars@metafoo.de Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-08iio: magnetometer: st_magn: Add LSM303CStephan Gerhold
The magnetometer part of ST LSM303C is similar (perhaps even identical) to the already supported standalone LIS3MDL magnetometer, so just add the new st,lsm303c-magn compatible for the existing definitions. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230106102239.9647-4-stephan@gerhold.net Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-12-28iio: magnetometer: add ti tmag5273 driverGerald Loacker
Add support for TI TMAG5273 Low-Power Linear 3D Hall-Effect Sensor. Additionally to temperature and magnetic X, Y and Z-axes the angle and magnitude are reported. The sensor is operating in continuous measurement mode and changes to sleep mode if not used for 5 seconds. Datasheet: https://www.ti.com/lit/gpn/tmag5273 Signed-off-by: Gerald Loacker <gerald.loacker@wolfvision.net> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221201072220.402585-4-gerald.loacker@wolfvision.net Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: magnetometer: yamaha-yas530: Convert to i2c's .probe_new()Uwe Kleine-König
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-160-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: magnetometer: mmc35240: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-159-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: magnetometer: mag3110: Convert to i2c's .probe_new()Uwe Kleine-König
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-158-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: magnetometer: hmc5843: Convert to i2c's .probe_new()Uwe Kleine-König
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-157-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: magnetometer: bmc150_magn_i2c: Convert to i2c's .probe_new()Uwe Kleine-König
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-156-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: magnetometer: ak8975: Convert to i2c's .probe_new()Uwe Kleine-König
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-155-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: magnetometer: ak8974: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-154-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: accel: st_magn: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221023132302.911644-23-u.kleine-koenig@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-10-08Merge tag 'char-misc-6.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the large set of char/misc and other small driver subsystem changes for 6.1-rc1. Loads of different things in here: - IIO driver updates, additions, and changes. Probably the largest part of the diffstat - habanalabs driver update with support for new hardware and features, the second largest part of the diff. - fpga subsystem driver updates and additions - mhi subsystem updates - Coresight driver updates - gnss subsystem updates - extcon driver updates - icc subsystem updates - fsi subsystem updates - nvmem subsystem and driver updates - misc driver updates - speakup driver additions for new features - lots of tiny driver updates and cleanups All of these have been in the linux-next tree for a while with no reported issues" * tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits) w1: Split memcpy() of struct cn_msg flexible array spmi: pmic-arb: increase SPMI transaction timeout delay spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes spmi: pmic-arb: correct duplicate APID to PPID mapping logic spmi: pmic-arb: add support to dispatch interrupt based on IRQ status spmi: pmic-arb: check apid against limits before calling irq handler spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq spmi: pmic-arb: handle spurious interrupt spmi: pmic-arb: add a print in cleanup_irq drivers: spmi: Directly use ida_alloc()/free() MAINTAINERS: add TI ECAP driver info counter: ti-ecap-capture: capture driver support for ECAP Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items dt-bindings: counter: add ti,am62-ecap-capture.yaml counter: Introduce the COUNTER_COMP_ARRAY component type counter: Consolidate Counter extension sysfs attribute creation counter: Introduce the Count capture component counter: 104-quad-8: Add Signal polarity component counter: Introduce the Signal polarity component counter: interrupt-cnt: Implement watch_validate callback ...
2022-09-04iio: magnetometer: yamaha-yas530: Use dev_err_probe()Andy Shevchenko
Unify error message format by using dev_err_probe(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220831141530.80572-3-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-04iio: magnetometer: yamaha-yas530: Make strings const in chip infoAndy Shevchenko
For better compiler coverage mark strings consts in the chip info. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220831141530.80572-2-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-04iio: magnetometer: yamaha-yas530: Use pointers as driver dataAndy Shevchenko
Unify ID tables to use pointers for driver data. It will allow to simplify the driver later on. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220831141530.80572-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-16i2c: Make remove callback return voidUwe Kleine-König
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-15iio: magnetometer: yas530: Add YAS537 variantJakob Hauser
Add support for the magnetometer Yamaha YAS537. The additions are based on comparison of Yamaha Android kernel drivers for YAS532 [1] and YAS537 [2]. In the Yamaha YAS537 Android driver, there is an overflow/underflow control implemented. For regular usage, this seems not necessary. A similar overflow/ underflow control of Yamaha YAS530/532 Android driver isn't integrated in the mainline driver. It is therefore skipped for YAS537 in the mainline too. Also in the Yamaha YAS537 Android driver, at the end of the reset_yas537() function, a measurement is saved in "last_after_rcoil". Later on, this is compared to current measurements. If the difference gets too big, a new reset is initialized. The difference in measurements needs to be quite big, it's hard to say if this is necessary for regular operation. Therefore this isn't integrated in the mainline driver either. [1] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/GT-I9195I/drivers/iio/magnetometer/yas_mag_drv-yas532.c [2] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/GT-I9195I/drivers/iio/magnetometer/yas_mag_drv-yas537.c Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/264c6488733a5c32089c9ab406a5bcb808c48fef.1660337264.git.jahau@rocketmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15iio: magnetometer: yas530: Add function pointers to "chip_info"Jakob Hauser
Add function pointers to the "chip_info" structure to ease the handling of different YAS variants. In the function yas5xx_probe(), the function call for "measure_offsets" was added as a conditional "if (ci->measure_offsets)". This is a preparatory step for YAS537, as this variant doesn't need an offset measurement. Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/4bd3f96262e0132b7f9720521a801da3c18abd95.1660337264.git.jahau@rocketmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15iio: magnetometer: yas530: Add temperature calculation to "chip_info"Jakob Hauser
Add temperature calculation to the "chip_info" structure to ease the handling of different YAS variants. Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/1a8bffdb7e807455620a73f2d61981e7f9aab8d5.1660337264.git.jahau@rocketmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15iio: magnetometer: yas530: Add IIO scaling to "chip_info"Jakob Hauser
Add IIO scaling to the "chip_info" structure to ease the handling to different YAS variants. Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/a12f892633bbee13a8856c231dc793ebbc5d3a03.1660337264.git.jahau@rocketmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15iio: magnetometer: yas530: Add volatile registers to "chip_info"Jakob Hauser
Add volatile registers to the "chip_info" structure to ease the handling of different YAS variants. Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/aeba3877933ba9d2c920b459a9037d9186c15a4f.1660337264.git.jahau@rocketmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15iio: magnetometer: yas530: Introduce "chip_info" structureJakob Hauser
Introduce the "chip_info" structure approach for better variant handling. The variant to be used is now chosen by the Device Tree (enum "chip_ids"), not by the chip ID in the register. However, there is a check to make sure they match (using integer "id_check"). Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/57236545107286771d351b95091bf56815d3717d.1660337264.git.jahau@rocketmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15iio: magnetometer: yas530: Apply documentation and style fixesJakob Hauser
This commit gathers several minor changes. In the device examples, "Xiaomi" is too generic, specific devices should be listed here. E.g. Xiaomi Redmi 2 seems to have YAS537 but it's not fully clear if this applies to all its variants. Samsung Galaxy S7 is often quoted in conjunction with YAS537. Removed defines for device IDs of YAS537 and YAS539, they are not needed so far. Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/300e394a76eb30fa031ecb69b594e9f9a70dac42.1660337264.git.jahau@rocketmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15iio: magnetometer: yas530: Move printk %*ph parameters out from stackJakob Hauser
Use less stack by modifying %*ph parameters. While at it, in the function yas530_get_calibration_data(), the debug dump was extended to 16 elements as this is the size of the calibration data array of YAS530. Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/93b50c20adb1b2acb4cddb1ab25755070edd7c07.1660337264.git.jahau@rocketmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15iio: magnetometer: yas530: Rename functions and registersJakob Hauser
This is a preparation for adding the YAS537 variant. Functions that are used only by YAS530, YAS532 and YAS533 are renamed from yas5xx to yas530. Same for the registers. To avoid part listing in function and registers names, the name of the first variant is used. Where appropriate, comments were added that these functions are used by more than one variant. Functions that will be used by all variants including YAS537 remain in the naming scheme yas5xx. Or YAS5XX for registers, respectively. Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/344d3b2f5e050eab79ce9962c24781486774d9fb.1660337264.git.jahau@rocketmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15iio: magnetometer: yas530: Change data type of calibration coefficientsJakob Hauser
This is a preparation for adding YAS537 variant. YAS537 uses other data types on the calibration coefficients [1] than YAS530 [2] and YAS532 [3]. On YAS537, at least for a4 and a7 this could matter because 8-bit unsigned data from the register gets stored into a signed data type, therefore this should be 8-bit as well. For YAS530/532, on the other hand, it doesn't seem to matter. The size of a2-a9 and k is smaller than 8-bit at extraction, also the applied math is low. And Cx/Cy1/Cy2, now being defined as signed 16-bit, are extracted as unsigned 8-bit and undergo only minor math. [1] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/GT-I9195I/drivers/iio/magnetometer/yas_mag_drv-yas537.c#L76-L78 [2] https://github.com/NovaFusion/android_kernel_samsung_golden/blob/cm-12.1/drivers/sensor/compass/yas_mag_driver-yas530.c#L526-L527 [3] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/GT-I9195I/drivers/iio/magnetometer/yas_mag_drv-yas532.c#L76-L77 Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/f1e53bd6672aebe59f9b236b41374482edf888f8.1660337264.git.jahau@rocketmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15iio: magnetometer: yas530: Correct temperature handlingJakob Hauser
The raw temperature value is a number of counts from a certain starting point. The resolution of the temperature counts is different for the YAS variants. Temperature compensation for YAS532 version AC seems to be handled differently. It uses the deviation from 20 degree Celsius [1] whereas YAS530 and older versions of YAS532 apply solely the t value as a multiplier [2][3]. In funtion yas5xx_read_raw(), add case IIO_CHAN_INFO_PROCESSED. Remove scale of temperature as this isn't applied. Additionally correct sign of temperature channel in iio_chan_spec. It's already defined that way in the yas5xx_get_measure() function. [1] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/GT-I9195I/drivers/iio/magnetometer/yas_mag_drv-yas532.c#L442 [2] https://github.com/NovaFusion/android_kernel_samsung_golden/blob/cm-12.1/drivers/sensor/compass/yas_mag_driver-yas530.c#L881-L883 [3] https://github.com/LineageOS/android_kernel_samsung_msm8930-common/blob/lineage-18.1/drivers/sensors/geomagnetic/yas_mag_driver-yas53x.c#L856-L858 Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/eb45f328c7a81eb622c6a8cfc5c468ea58bbdace.1660337264.git.jahau@rocketmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15iio: magnetometer: yas530: Correct scaling of magnetic axesJakob Hauser
Looks like YAS530 raw values return picotesla and YAS532 nanotesla. Adapt comments and scaling. Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/053ab05cb9a0f6b0536ab5e0de57009f513c6f81.1660337264.git.jahau@rocketmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15iio: magnetometer: yas530: Change range of data in volatile registerJakob Hauser
In function yas5xx_volatile_reg(), register "YAS5XX_MEASURE_DATA + 8" shouldn't be volatile as we count from 0 to 7 here. Instead of lowering the number from 8 to 7, the operator "<=" is replaced by "<". The size of the measure data array is 8, therefore it's more natural to use 8 as a constant. This change is of low importance as the "+ 8" register isn't called. Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/dabba10feb80171350525ac874f944076c46e084.1660337264.git.jahau@rocketmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15iio: magnetometer: yas530: Change data type of hard_offsets to signedJakob Hauser
The "hard_offsets" are currently unsigned u8 but they should be signed as they can get negative. They are signed in function yas5xx_meaure_offsets() and in the Yamaha drivers [1][2]. [1] https://github.com/NovaFusion/android_kernel_samsung_golden/blob/cm-12.1/drivers/sensor/compass/yas.h#L156 [2] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/GT-I9195I/drivers/iio/magnetometer/yas_mag_drv-yas532.c#L91 Fixes: de8860b1ed47 ("iio: magnetometer: Add driver for Yamaha YAS530") Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/40f052bf6491457d0c5c0ed4c3534dc6fa251c3c.1660337264.git.jahau@rocketmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-15iio: magn: hmc5843: Move struct dev_pm_ops out of headerJonathan Cameron
Having this structure defined static in the header lead to unnecessary duplication and required additional symbol exports. Use the EXPORT_NS_SIMPLE_DEV_PM_OPS() to clean this up in the same fashion as many other drivers do this. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220807184534.1037363-3-jic23@kernel.org
2022-08-15iio: magn: hmc5843: Drop excessive indentation of assignments of hmc5843_driverJonathan Cameron
This formatting is odd, so fix it to be more standard. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220807184534.1037363-2-jic23@kernel.org
2022-07-18iio: magnetometer: hmc5843: Remove duplicate 'the'Jiang Jian
Fix an obvious typing error, found by spellcheck(1). Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com> Link: https://lore.kernel.org/r/20220622035925.5008-1-jiangjian@cdjrlc.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-07-18iio: magn: yas530: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macrosJonathan Cameron
Using these new macros allows the compiler to remove the unused dev_pm_ops structure and related functions if !CONFIG_PM without the need to mark the functions __maybe_unused. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20220621202719.13644-37-jic23@kernel.org
2022-07-18iio: magnetometer: ak8974: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macrosJonathan Cameron
Using these new macros allows the compiler to remove the unused dev_pm_ops structure and related functions if !CONFIG_PM without the need to mark the functions __maybe_unused. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20220621202719.13644-36-jic23@kernel.org
2022-07-16iio: magnetometer: rm3100: do not explicity set INDIO_BUFFER_TRIGGERED modeMarcus Folkesson
The core sets INDIO_BUFFER_TRIGGERED as part of devm_iio_triggered_buffer_setup(). Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Link: https://lore.kernel.org/r/20220702085005.31666-1-marcus.folkesson@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-07-14Merge tag 'iio-for-5.20a' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: IIO new device support, features and minor fixes for 5.20 Several on-running cleanup efforts dominate this time, plus the DMA safety alignment issue identified due to improved understanding of the restrictions as a result of Catalin Marinas' efforts in that area. One immutable branch in here due to MFD and SPMI elements needed for the qcom-rradc driver. Device support * bmi088 - Add support for bmi085 (accelerometer part of IMU) - Add support for bmi090l (accelerometer part of IMU) * mcp4922 - Add support for single channel device MCP4921 * rzg2l-adc - Add compatible and minor tweaks to support RZ/G2UL ADC * sca3300 - Add support for scl3300 including refactoring driver to support multiple device types and cleanup noticed whilst working on driver. * spmi-rradc - New driver for Qualcomm SPMI Round Robin ADC including necessary additional utility functions in SPMI core and related MFD driver. * ti-dac55781 - Add compatible for DAC121C081 which is very similar to existing parts. Features * core - Warn on iio_trigger_get() on an unregistered IIO trigger. * bma400 - Triggered buffer support - Activity and step counting - Misc driver improvements such as devm and header ordering * cm32181 - Add PM support. * cros_ec - Sensor location support * sx9324 - Add precharge resistor setting - Add internal compensation resistor setting - Add CS idle/sleep mode. * sx9360 - Add precharge resistor setting * vl53l0x - Handle reset GPIO, regulator and relax handling of irq type. Cleanup and minor fixes: Treewide changes - Cleanup of error handling in remove functions in many drivers. - Update dt-binding maintainers for a number of ADI bindings. - Several sets of conversion of drivers from device tree specific to generic device properties. Includes fixing up various related header and Kconfig issues. - Drop include of of.h from iio.h and fix up drivers that need to include it directly. - More moves of clusters of drivers into appropriate IIO_XXX namespaces. - Tree wide fix of a long running bug around DMA safety requirements. IIO was using __cacheline_aligned to pad iio_priv() structures. This worked for a long time by coincidence, but correct alignment is ARCH_KMALLOC_MINALIGN. As there is activity around this area, introduce an IIO local IIO_DMA_MINALIGN to allow for changing it in one place rather than every driver in future. Note, there have been no reports of this bug in the wild, and it may not happen on any platforms supported by upstream, so no rush to backport these fixes. Other cleanup * core - Switch to ida_alloc()/free() - Drop unused iio_get_time_res() - Octal permissions and DEVICE_ATTR_* macros. - Cleanup bared unsigned usage. * MAINTAINERS - Add include/dt-bindings/iio/ to the main IIO entry. * ad5380 - Comment syntax fix. * ad74413r - Call to for_each_set_bit_from(), with from value as 0 replaced. * ad7768-1 - Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core. * adxl345 - Fix wrong address in dt-binding example. * adxl367 - Drop extra update of FIFO watermark. * at91-sama5d2 - Limit requested watermark to the hwfifo size. * bmg160, bme680 - Typos * cio-dac - Switch to iomap rather than direct use of ioports * kxsd9 - Replace CONFIG_PM guards with new PM macros that let the compiler cleanly remove the unused code and structures when !CONFIG_PM * lsm6dsx - Use new pm_sleep_ptr() and EXPORT_SIMPLE_DEV_PM_OPS(). Then move to Namespace. * meson_saradc - general cleanup. - Avoid attaching resources to iio_dev->dev - Use same struct device for all error messages - Convert to dev_err_probe() and use local struct device *dev to reduce code complexity. - Use devm_clk_get_optional() instead of hand rolling. - Use regmap_read_poll_timeout() instead of hand rolling. * mma7660 - Drop ACPI_PTR() use that is unhelpful. * mpu3050 - Stop exporting symbols not used outside of module - Switch to new DEFINE_RUNTIME_DEV_PM_OPS() macro and move to Namespace. * ping - Typo fix * qcom-spmi-rradc - Typo fix * sc27xx - Convert to generic struct u32_fract * srf08 - Drop a redundant check on !val * st_lsm6dsx - Limit the requested watermark to the hwfifo size. * stm32-adc - Use generic_handle_domain_irq() instead of opencoding. - Fix handling of ADC disable. * stm32-dac - Use str_enabled_disable() instead of open coding. * stx104 - Switch to iomap rather than direct use of ioports * tsc2046 - Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core. * tsl2563 - Replace flush_scheduled_work() with cancel_delayed_work_sync() - Replace cancel_delayed_work() with cancel_delayed_work_sync() * vl53l0x - Make the VDD regulator optional by allowing a dummy regulator. * tag 'iio-for-5.20a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (244 commits) iio: adc: xilinx-xadc: Drop duplicate NULL check in xadc_parse_dt() iio: adc: xilinx-xadc: Make use of device properties iio: light: cm32181: Add PM support iio: adc: ad778-1: do not explicity set INDIO_BUFFER_TRIGGERED mode iio: adc: ti-tsc2046: do not explicity set INDIO_BUFFER_TRIGGERED mode iio: adc: stm32-adc: disable adc before calibration iio: adc: stm32-adc: make safe adc disable iio: dac: ad5380: align '*' each line and drop unneeded blank line iio: adc: qcom-spmi-rradc: Fix spelling mistake "coherrency" -> "coherency" iio: Don't use bare "unsigned" dt-bindings: iio: dac: mcp4922: expand for mcp4921 support iio: dac: mcp4922: add support to mcp4921 iio: chemical: sps30: Move symbol exports into IIO_SPS30 namespace iio: pressure: bmp280: Move symbol exports to IIO_BMP280 namespace iio: imu: bmi160: Move exported symbols to IIO_BMI160 namespace iio: adc: stm32-adc: Use generic_handle_domain_irq() proximity: vl53l0x: Make VDD regulator actually optional MAINTAINERS: add include/dt-bindings/iio to IIO SUBSYSTEM AND DRIVERS dt-bindings: iio/accel: Fix adi,adxl345/6 example I2C address iio: gyro: bmg160: Fix typo in comment ...
2022-06-20Merge tag 'iio-fixes-for-5.19a' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: 1st set of IIO fixes for the 5.19 cycle. Most of these have been in next for a long time. Unfortunately there was one stray patch in the branch (wasn't a fix), so I've just rebased to remove that. * testing - Fix a missing MODULE_LICENSE() warning by restricting possible build configs. * Various drivers - Fix ordering of iio_get_trigger() being called before iio_trigger_register() * adi,admv1014 - Fix dubious x & !y warning. * adi,axi-adc - Fix missing of_node_put() in error and normal paths. * aspeed,adc - Add missing of_node_put() * fsl,mma8452 - Fix broken probing from device tree. - Drop check on return value of i2c write to device to cause reset as ACK will be missing (device reset before sending it). * fsl,vf610 - Fix documentation of in_conversion_mode ABI. * iio-trig-sysfs - Ensure irq work has finished before freeing the trigger. * invensense,mpu3050 - Disable regulators in error path. * invensense,icm42600 - Fix collision of enum value of 0 with error path where 0 is no match. * renesas,rzg2l_Adc - Add missing fwnode_handle_put() in error path. * rescale - Fix a boolean logic bug for detection of raw + scale affecting an obscure corner case. * semtech,sx9324 - Check return value of read of pin_defs * st,stm32-adc: - Fix interaction across ADC instances for some supported devices. - Drop false spurious IRQ messages. - Fix calibration value handling. If we can't calibrate don't expose the vref_int channel. - Fix maximum clock rate for stm32pm15x * ti,ads131e08 - Add missing fwnode_handle_put() in error paths. * xilinx,ams - Fix variable checked for error from platform_get_irq() * x-powers,axp288 - Overide TS_PIN bias current for boards where it is not correctly initialized. * yamaha,yas530 - Fix inverted check on calibration data being all zeros. * tag 'iio-fixes-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (26 commits) iio:proximity:sx9324: Check ret value of device_property_read_u32_array() iio: accel: mma8452: ignore the return value of reset operation iio: adc: stm32: fix maximum clock rate for stm32mp15x iio: adc: stm32: fix vrefint wrong calibration value handling iio: imu: inv_icm42600: Fix broken icm42600 (chip id 0 value) iio: adc: vf610: fix conversion mode sysfs node name iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_client iio: test: fix missing MODULE_LICENSE for IIO_RESCALE=m iio:humidity:hts221: rearrange iio trigger get and register iio:chemical:ccs811: rearrange iio trigger get and register iio:accel:mxc4005: rearrange iio trigger get and register iio:accel:kxcjk-1013: rearrange iio trigger get and register iio:accel:bma180: rearrange iio trigger get and register iio: afe: rescale: Fix boolean logic bug iio: adc: aspeed: Fix refcount leak in aspeed_adc_set_trim_data iio: adc: stm32: Fix IRQs on STM32F4 by removing custom spurious IRQs message iio: adc: stm32: Fix ADCs iteration in irq handler iio: adc: ti-ads131e08: add missing fwnode_handle_put() in ads131e08_alloc_channels() iio: adc: rzg2l_adc: add missing fwnode_handle_put() in rzg2l_adc_parse_properties() iio: trigger: sysfs: fix use-after-free on remove ...
2022-06-11iio:magnetometer:mbc150: Make bmc150_magn_remove() return voidUwe Kleine-König
bmc150_magn_remove() always returns zero. Make it return no value which makes it easier to see in the callers that there is no error to handle. Also the return value of i2c driver remove callbacks is ignored anyway. This prepares making i2c remove callbacks return void, too. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20220514133250.307955-1-u.kleine-koenig@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-05-19Merge tag 'iio-for-5.19a' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: First set of IIO new device support, features and cleanup for 5.19 Usual mixed bag. Stand out this time is Andy Shevchenko's continuing effort to move drivers over the generic firmware interfaces. Device support * sprd,sc2720 - upm9620 binding addition. - Refactor and support for sc2720, sc2721 and sc2730. * ti,ads1015 - Refactor driver and add support for TLA2024. Device support (IDs only) * invensense,mpu6050 - Add ID for ICM-20608-D. * st,accel: - Add ID for lis302dl. * st,lsm6dsx - Add support for ASM330LHHX (can fallback to LSM6DSR.) Features * convert drivers to device properties - IIO core - adi,ad7266 - adi,adis16480 - adi,adxl355 - bosch,bmi160 - domintech,dmard06 - fsl,fxas21002c - invensense,mpu3050 - linear,ltc2983 - linear,ltc2632 - maxbotix,mb1232 - maxim,max31856 - maxim,max31865 - multiplexer - ping - rescale - taos,tsl2772 * core - Add runtime check on whether realbits fit in storagebits for each channel. * adi,ad_sigma_delta - Add sequencer support and relevant update_scan_mode callbacks for adi,ad7192 and adi,ad7124. Cleanup and minor fixes * MAINTAINERS - Update Lorenzo Bianconi's email address for IIO drivers. - Add entry for ad3552r and update maintainer in dt-binding doc. * tree-wide - Replace strtobool() with kstrtobool(). - Drop false OF dependencies. * core - Tidy up and document IIO modes. - Take iio_buffer_enabled() out of header allowing current_mode to be moved to the opaque structure. - As all kfifo buffers use the same mode value, drop that parameter and set it unconditionally. - White space fixes and similar. - Drop use of list iterator variable for list_for_each_entry_continue_reverse and use list_prepare_entry to restart. * sysfs-trigger - Replace use of 'found' variable with dedicate list iterator variable. * adi,ad7124 - Drop misleading shift. * adi,ad2s1210 - Remove redundant local variable assignment. * adi,adis16480 - Use local device pointer to reduce repetition. - Improve handling of clocks. * domintech,dmard09 - White space. * dummy driver - Improve error handling. * fsl,mma8452 - Add missing documentation of name element. * invensense,mpu3050 - Stop remove() returning non 0. * kionix,kxsd9 - White space. * linear,ltc2688 - Use local variable for struct device. - Combine of_node_put() error handling paths. * linear,ltc2983 - Avoid use of constants in messages where a define is available. * microchip,mcp4131 - Fix compatible in dt example. * pni,rm3100 - Stop directly accessing iio_dev->current_mode just to find out if the buffer is enabled. * renesas,rzg2l - Relax kconfig constraint to include newer devices. * sprd,sc27xx - Fix wrong scaling mask. - Improve the calibration values. * samsung,ssp - Replace a 'found' variable in favor of an explicit value that was found. * sensortek,stk3xx - Add proximity-near-level binding and driver support. * st,st_sensors: - Drop unused accel_type enum. - Return early in *_write_raw() - Drop unnecessary locking in _avail functions. - Add local lock to protect odr against concurrent updates allowing mlock to no longer be used outside of the core. - Use iio_device_claim_direct_mode() rather than racy checking of the current mode. * st,stmpe-adc - Fix checks on wait_for_completion_timeout(). - Allow use of of_device_id for matching. * st,stm32-dfsdm - Stop accessing iio_dev->current_mode to find out if the buffer is enabled (so we can hide that variable in the opaque structure) * st,vl53l0x - Fix checks on wait_for_completion_timeout. * ti,ads1015 - Add missing ID for ti,ads1115 in binding doc. - Convert from repeated chip ID look up to selecting static const data. - Switch to read_avail() callback. * ti,ads8688 - Use of_device_id for driver matching. * ti,palmas-adc - Drop a warning on minor calibration mismatch leading to slightly negative values after applying the calibration. * tag 'iio-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (95 commits) iio: ti-ads8688: use of_device_id for OF matching iio: stmpe-adc: use of_device_id for OF matching dt-bindings: iio: Fix incorrect compatible strings in examples iio: gyro: mpu3050: Make mpu3050_common_remove() return void iio: dac: ltc2632: Make use of device properties iio: temperature: max31865: Make use of device properties iio: proximity: mb1232: Switch to use fwnode_irq_get() iio: imu: adis16480: Improve getting the optional clocks iio: imu: adis16480: Use temporary variable for struct device iio: imu: adis16480: Make use of device properties staging: iio: ad2s1210: remove redundant assignment to variable negative iio: adc: sc27xx: add support for PMIC sc2730 iio: adc: sc27xx: add support for PMIC sc2720 and sc2721 iio: adc: sc27xx: refactor some functions for support more PMiCs iio: adc: sc27xx: structure adjustment and optimization iio: adc: sc27xx: Fine tune the scale calibration values iio: adc: sc27xx: fix read big scale voltage not right dt-bindings:iio:adc: add sprd,ump9620-adc dt-binding iio: proximity: stk3310: Export near level property for proximity sensor dt-bindings: iio: light: stk33xx: Add proximity-near-level ...
2022-05-07iio: magnetometer: yas530: Fix memchr_inv() misuseLinus Walleij
The call to check if the calibration is all zeroes is doing it wrong: memchr_inv() returns NULL if the the calibration contains all zeroes, but the check is for != NULL. Fix it up. It's probably not an urgent fix because the inner check for BIT(7) in data[13] will save us. But fix it. Fixes: de8860b1ed47 ("iio: magnetometer: Add driver for Yamaha YAS530") Reported-by: Jakob Hauser <jahau@rocketmail.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220501195029.151852-1-linus.walleij@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-28iio: magnetometer: ak8974: Drop dependency on OFAndy Shevchenko
Nothing in this driver depends on OF firmware so drop the dependency to remove the false impression such a dependency exists. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220413184502.20998-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-10iio: magnetometer: ak8975: Fix the error handling in ak8975_power_on()Zheyu Ma
When the driver fails to enable the regulator 'vid', we will get the following splat: [ 79.955610] WARNING: CPU: 5 PID: 441 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0 [ 79.959641] RIP: 0010:_regulator_put+0x3ec/0x4e0 [ 79.967570] Call Trace: [ 79.967773] <TASK> [ 79.967951] regulator_put+0x1f/0x30 [ 79.968254] devres_release_group+0x319/0x3d0 [ 79.968608] i2c_device_probe+0x766/0x940 Fix this by disabling the 'vdd' regulator when failing to enable 'vid' regulator. Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Link: https://lore.kernel.org/r/20220409034849.3717231-2-zheyuma97@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-10iio: st_sensors: Stop abusing mlock to ensure internal coherencyMiquel Raynal
An odr_lock has been introduced to protect local accesses to the odr internal cache and ensure the cached value always reflected the actual value. Using the mlock() for this purpose is no longer needed, so let's drop these extra mutex_lock/unlock() calls. Suggested-by: Jonathan Cameron <jic23@kernel.org> Cc: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20220207143840.707510-8-miquel.raynal@bootlin.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-10iio: st_sensors: Return as early as possible from the _write_raw() callbacksMiquel Raynal
As there is no cleanup to do, let's return as early as possible in the various ST sensor drivers _write_raw() callback functions. There is no functional change. Suggested-by: Jonathan Cameron <jic23@kernel.org> Cc: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20220207143840.707510-5-miquel.raynal@bootlin.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-10iio: magnetometer: rm3100: Stop abusing the ->currentmodeMiquel Raynal
This is an internal variable for the core, here it is set to a "default" value by the driver in order to later be able to perform checks against it. None of this is needed because this check actually cares about the buffers being enabled or not. So it is an unproper side-channel access to the information "are the buffers enabled?", returned officially by the iio_buffer_enabled() helper. Use this helper instead. Cc: Song Qiang <songqiang1304521@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20220207143840.707510-3-miquel.raynal@bootlin.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-03-28Merge tag 'char-misc-5.18-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the big set of char/misc and other small driver subsystem updates for 5.18-rc1. Included in here are merges from driver subsystems which contain: - iio driver updates and new drivers - fsi driver updates - fpga driver updates - habanalabs driver updates and support for new hardware - soundwire driver updates and new drivers - phy driver updates and new drivers - coresight driver updates - icc driver updates Individual changes include: - mei driver updates - interconnect driver updates - new PECI driver subsystem added - vmci driver updates - lots of tiny misc/char driver updates All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits) firmware: google: Properly state IOMEM dependency kgdbts: fix return value of __setup handler firmware: sysfb: fix platform-device leak in error path firmware: stratix10-svc: add missing callback parameter on RSU arm64: dts: qcom: add non-secure domain property to fastrpc nodes misc: fastrpc: Add dma handle implementation misc: fastrpc: Add fdlist implementation misc: fastrpc: Add helper function to get list and page misc: fastrpc: Add support to secure memory map dt-bindings: misc: add fastrpc domain vmid property misc: fastrpc: check before loading process to the DSP misc: fastrpc: add secure domain support dt-bindings: misc: add property to support non-secure DSP misc: fastrpc: Add support to get DSP capabilities misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP misc: fastrpc: separate fastrpc device from channel context dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells dt-bindings: nvmem: make "reg" property optional nvmem: brcm_nvram: parse NVRAM content into NVMEM cells nvmem: dt-bindings: Fix the error of dt-bindings check ...
generated by cgit (git 2.34.1) at 2025-04-14 17:27:57 +0000