summaryrefslogtreecommitdiff
path: root/drivers/iio/pressure/Kconfig
AgeCommit message (Collapse)Author
2016-07-03iio: pressure: bmp280: add SPI interface driverLinus Walleij
This patch mimics the SPI functionality found in the misc driver in drivers/misc/bh085-spi.c to make it possible to reuse the existing BMP280/BMP180/BMP085 driver with all clients of the other driver. The adoption is straight-forward since like the other driver, it is a simple matter of using regmap. This driver is also so obviously inspired/copied from the old misc driver in drivers/misc/bmp085.c that I just took the liberty to add in the authors of the other drivers + self in the core driver file. The MISC driver also supports a variant named "BMP181" so include that here to be complete in comparison to the old driver. The bus mapping code for SPI was written by Akinobu Mita. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Tested-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-07-03iio: pressure: bmp280: split off an I2C Kconfig entryLinus Walleij
This creates a separate BMP280_I2C Kconfig entry that gets selected by BMP280 for I2C transport. As we currently only support I2C transport there is not much practical change other than getting a separate object file (or module) for the I2C driver part. The old Kconfig symbol BMP280 will still select the stuff we need so that oldconfig and old defconfigs works fine. Tested-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-29iio:st_pressure:initial lps22hb sensor supportGregor Boirie
Initial support for ST LPS22HB pressure sensor. Datasheet: http://www2.st.com/resource/en/datasheet/lps22hb.pdf Features: * pressure data and timestamping channels * sampling frequency selection * interrupt based trigger * over I2C or SPI Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-21iio: pressure: bmp280: add humidity supportMatt Ranostay
Enable humidity support for the BME280 part Signed-off-by: Matt Ranostay <matt.ranostay@intel.com> Acked-by: Vlad Dogaru <vlad.dogaru@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-25iio: pressure: bmp280: add support for BMP180Akinobu Mita
This adds support for the BMP180 to the bmp280 iio driver. The BMP180 has already been supported by misc/bmp085 driver but it doesn't use iio framework. This change adds the kconfig dependency not to be selected both of them in order to avoid any issues. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Vlad Dogaru <vlad.dogaru@intel.com> Cc: Christoph Mair <christoph.mair@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-24iio: pressure: hp03: Add Hope RF HP03 sensor supportMarek Vasut
Add support for HopeRF pressure and temperature sensor. This device uses two fixed I2C addresses, one for storing calibration coefficients and another for accessing the ADC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Matt Ranostay <mranostay@gmail.com> Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-03hp206c: Initial support for reading sensor valuesCrestez Dan Leonard
Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-17iio: pressure: ms5611: select IIO_BUFFERArnd Bergmann
The ms5611 driver started using the IIO_TRIGGERED_BUFFER infrastructure which in turn depend on IIO_BUFFER, and it produces a build error now if that is not enabled: warning: (... && MS5611 && ...) selects IIO_TRIGGERED_BUFFER which has unmet direct dependencies (IIO && IIO_BUFFER) buffer/industrialio-triggered-buffer.c: In function 'iio_triggered_buffer_setup': buffer/industrialio-triggered-buffer.c:58:2: error: implicit declaration of function 'iio_device_attach_buffer' [-Werror=implicit-function-declaration] pressure/ms5611_core.c: In function 'ms5611_trigger_handler': pressure/ms5611_core.c:193:2: error: implicit declaration of function 'iio_push_to_buffers_with_timestamp' [-Werror=implicit-function-declaration] This adds the second select. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 713bbb4efb9d ("iio: pressure: ms5611: Add triggered buffer support") Acked-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-06iio: pressure: ms5611: Add triggered buffer supportDaniel Baluta
This will be used together with an external trigger (e.g hrtimer based software trigger). Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-30iio:pressure:Kconfig white space cleanup.Jonathan Cameron
Clearly a high degree of cut and paste has gone on in this file, propogating a particularly random combination of tabs and spaces. This patch at least should make it all consistent going forward. Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-30iio: pressure: mpl115: support MPL115A1Akinobu Mita
mpl115 driver currently supports i2c interface (MPL115A2). There is also SPI version (MPL115A1). The difference between them is only physical transport so we can easily support both while sharing most of the code. Split the driver into a core support module and one module each for I2C and SPI support. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald <pmeerw@pmeerw.net> Cc: linux-iio@vger.kernel.org Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-11Add ms8607 meas-spec driver supportLudovic Tancerel
Support for MS8607 temperature, pressure & humidity sensor. This part is using functions from MS5637 for temperature and pressure and HTU21 for humidity Signed-off-by: Ludovic Tancerel <ludovic.tancerel@maplehightech.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-11Add ms5637 meas-spec driver supportLudovic Tancerel
Support for MS5637 temperature & pressure sensor Signed-off-by: Ludovic Tancerel <ludovic.tancerel@maplehightech.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-07-05iio: pressure: ms5611: add support for MS5607 temperature and pressure sensorTomasz Duszynski
MS5607 is temperature and pressure sensor which hardware is similar to MS5611. Both sensors share command protocol and support both I2C and SPI serial protocols. They only differ in compensation algorithms. Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-06-21iio: pressure: Fix Measurement Specialties vendor namePeter Meerwald
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-15iio: pressure: add support for MS5611 pressure and temperature sensorTomasz Duszynski
Add support for Measurement Specialities MS5611 pressure and temperature sensor. Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-10-22iio: add bmp280 pressure and temperature driverVlad Dogaru
Minimal implementation, can read temperature and data using direct mode. Datasheet available at <http://ae-bst.resource.bosch.com/media/products/dokumente/bmp280/BST-BMP280-DS001-09.pdf> Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-06-14iio: Add t5403 barometric pressure sensor driverPeter Meerwald
16-bit pressure and temperature sensor the chip can do I2C and SPI, only the I2C interface is supported by the driver at the moment datasheet: http://www.epcos.com/inf/57/ds/T5400.pdf application note: http://www.epcos.com/blob/993154/download/1/t5403-applicationnote.pdf an out-of-tree driver targetting the input subsystem is at https://github.com/unixphere/t5400, it was rejected here: http://comments.gmane.org/gmane.linux.kernel.input/28107 v2: (thanks Hartmut Knaack) * fix MODE_HIGH, equals 2 * check INT_TIME mask in write_raw() Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Cc: Stefan Nilsson <stefan.nilsson@unixphere.com> Reviewed-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-05-03iio: Add Freescale MPL115A2 pressure / temperature sensor driverPeter Meerwald
I2C-controlled sensor with 10-bit pressure and temperature measurement datasheet: http://cache.freescale.com/files/sensors/doc/data_sheet/MPL3115A2.pdf v2: * use devm_iio_device_register() Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-02-22iio:pressure: Add support for LPS25H pressure sensorDenis CIOCCA
This patch adds support for the new barometer sensor: LPS25H. Signed-off-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-02-22iio: hid-sensors: Added Pressure Sensor driverArchana Patni
Added usage id processing for Pressure Sensor. This uses IIO interfaces for triggered buffer to present data to user mode. This uses HID sensor framework for registering callback events from the sensor hub. Signed-off-by: Archana Patni <archana.patni@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-11-24iio: Add Freescale MPL3115A2 pressure / temperature sensor driverPeter Meerwald
I2C-controlled MEMS sensor with 20-bit pressure measurement (pascal) and 12-bit temperature measurement driver only exposes basic functionality, see TODO remarks datasheet: http://cache.freescale.com/files/sensors/doc/data_sheet/MPL3115A2.pdf v2: * store 20-bit value in 32-bit buffer element (instead of 24-bit) * zero buffer to prevent kernel data leak to userspace * fix mutex unlock in trigger handler (thanks Andi Shyti) Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Reviewed-by: Andi Shyti <andi@etezian.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-10-23iio:pressure: Adds LPS001WP support also on spi interface and Kconfig fixDenis CIOCCA
Signed-off-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-03iio: Add a comment to about alphabetical order to Kconfigs and MakefilesLars-Peter Clausen
Keeping Makefile and Kconfig entries in alphabetical order usually works better than just appending new entries at the end, since it reduces the amount of conflicts. This patch adds a comment to the IIO Kconfig and Makefile files to document that the entries should be kept in alphabetical order. Also reorder those entries which weren't in alphabetical order yet. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-03iio: reword help text of several IIO_ST driversPeter Meerwald
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: "Denis Ciocca" <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-03iio: fix Kconfig typosPeter Meerwald
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-06-05iio:pressure: Add STMicroelectronics pressures driverDenis CIOCCA
This patch adds a generic pressure driver for STMicroelectronics pressure sensors, currently it supports: LPS331AP. Signed-off-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
generated by cgit (git 2.34.1) at 2025-04-15 15:07:37 +0000