summaryrefslogtreecommitdiff
path: root/drivers/iio/temperature
AgeCommit message (Collapse)Author
2017-11-13Merge tag 'staging-4.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO updates from Greg KH: "Here is the "big" staging and IIO driver update for 4.15-rc1. Lots and lots of little changes, almost all minor code cleanups as the Outreachy application process happened during this development cycle. Also happened was a lot of IIO driver activity, and the typec USB code moving out of staging to drivers/usb (same commits are in the USB tree on a persistent branch to not cause merge issues.) Overall, it's a wash, I think we added a few hundred more lines than removed, but really only a few thousand were modified at all. All of these have been in linux-next for a while. There might be a merge issue with Al's vfs tree in the pi433 driver (take his changes, they are always better), and the media tree with some of the odd atomisp cleanups (take the media tree's version)" * tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (507 commits) staging: lustre: add SPDX identifiers to all lustre files staging: greybus: Remove redundant license text staging: greybus: add SPDX identifiers to all greybus driver files staging: ccree: simplify ioread/iowrite staging: ccree: simplify registers access staging: ccree: simplify error handling logic staging: ccree: remove dead code staging: ccree: handle limiting of DMA masks staging: ccree: copy IV to DMAable memory staging: fbtft: remove redundant initialization of buf staging: sm750fb: Fix parameter mistake in poke32 staging: wilc1000: Fix bssid buffer offset in Txq staging: fbtft: fb_ssd1331: fix mirrored display staging: android: Fix checkpatch.pl error staging: greybus: loopback: convert loopback to use generic async operations staging: greybus: operation: add private data with get/set accessors staging: greybus: loopback: Fix iteration count on async path staging: greybus: loopback: Hold per-connection mutex across operations staging: greybus/loopback: use ktime_get() for time intervals staging: fsl-dpaa2/eth: Extra headroom in RX buffers ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-22iio:temperature: drop assignment of iio_info.driver_moduleJonathan Cameron
The equivalent of this is now done via macro magic when the relevant register call is made. The actual structure elements will shortly go away. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
2017-07-01iio: temperature: tsys01: Add OF match tableManivannan Sadhasivam
Add of_match_table for Measurement Specialties TSYS01 temperature sensor Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-07iio: temperature: maxim_thermocouple: add MAX31856 partMatt Ranostay
MAX31856 is register equivalent to the MAX31855 but suppports J, N, R, S, T, E and B type thermocouples in addition to K-type. Data conversion for the various types happens transparently to the driver via probe type detection, and a LUT on the sensor. Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-03-19iio: mlx96014: Add OF device ID tableJavier Martinez Canillas
The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Crt Mori <cmo@melexis.com> Acked-by: Crt Mori <cmo@melexis.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-03-04iio: hid: Add temperature sensor supportSong Hongyan
Environmental temperature sensor is a hid defined sensor, it measures temperature. More information can be found in: http://www.usb.org/developers/hidpage/HUTRR39b.pdf According to IIO ABI definition, IIO_TEMP data output unit is milli degrees Celsius. Add the unit convert from degree to milli degree. Signed-off-by: Song Hongyan <hongyan.song@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-02-19iio: maxim_thermocouple: Set parent deviceLars-Peter Clausen
Initialize the parent of the IIO device to the device that registered it. This makes sure that the IIO device appears the right level in the device hierarchy. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-02-05iio:temperature:tmp007: Add irq and threshold events supportManivannan Sadhasivam
This patch adds ALERT irq and limit threshold events support for TI TMP007 - 16 bit IR thermopile sensor with integrated math engine. Following threshold events are supported: 1. TObj high limit 2. TObj low limit 3. TDie high limit 4. TDie low limit Signed-off-by: Manivannan Sadhasivam <manivannanece23@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-30iio: tmp007: Fix `name` attribute ABILars-Peter Clausen
The IIO ABI specifies the name field of the IIO device as: Description of the physical chip / device for device X. Typically a part number. The tmp007 driver currently uses the name of the parent device instead. Change this to the part name to be in accordance with the ABI. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-14iio:temperature: Add support for TI TMP007 sensorManivannan Sadhasivam
This patch adds support for TI TMP007 - 16 bit IR thermopile sensor with integrated Math engine. Sensor takes care of calculating the object temperature with the help of calibrated constants stored in non-volatile memory, thereby reducing the calculation overhead. Signed-off-by: Manivannan Sadhasivam <manivannanece23@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-11-07Merge tag 'iio-for-4.10b' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-testing Jonathan writes: Second round of new device support, cleanups and fixes for IIO in the 4.10 cycle This includes two branch merges for elements that may also go via MFD. New device support * cros_ec - new driver to support these Chrome OS contiguous sensors which are behind the Chrome OS embedded controller. Requires a few minor MFD and chrome platform changes. One follow up fix deals with some dependency issues in Kconfig. * mpu-3050 - new driver and device tree bindings for this venerable device. * st_accel - support for the lng2dm an Driver features * ad7192 - Add DVdd regulator handling * ad9832 - Add DVDD regulator handling * at91 - Suspend and resume support * si7020 - Device tree bindings * ti-am335x - DMA support - uses dma to accelerate short bursts of read back rather than full blown DMA buffer support. Greatly improved performance. Includes an MFD addition to give access to the address needed for DMA. * tsl2583 - Device tree bindings Cleanups and minor fixes * ad7192 - Fix regulator naming to match datasheet - Handle regulator errors correctly (so as to not break deferred probing) - Rename reg variable to reflect which regulator it is * ad5933 - Fix regulator naming to match datasheet - Handle regulator errors correctly (so as to not break deferred probing) * ad7746 - Fix a missing return value (fallout from previous patch set) * ad7780 - Fix regulator naming to match datasheet - Handle regulator errors correctly (so as to not break deferred probing) * ad9832 - Fix regulator naming to match datasheet - Handle regulator errors correctly (so as to not break deferred probing) - Rename reg regulator to reflect which one it is * ad9834 - Fix regulator naming to match datasheet - Handle regulator errors correctly (so as to not break deferred probing) * hts221 - Remove a duplicated include * maxim thermocouple - Handle a wrong storage side in read function. Prevent any problems that might be introduced by additions to this driver in future. * tsl2583 - big set from Brian Masney to drive this towards a staging graduation. - Convert to iio_chan_spec and read_raw / write_raw (in a couple of steps) - Improved error handling in various functions - Drop redundant power_state custom sysfs attribute. - Use IIO_*_ATTR* macros for remaining attributes. - Return an error code to userspace on invalid parameters being writen to sysfs files. - Add locking to various attribute accesses to remove possible races. - Add defines for various magic numbers. - Use smbus_read_byte_data instead of a write_byte followed by read_byte. - Query only relevant registers in probe. - Tidy up ordering of code comments. - Remove a pointless power off sequence in taos_chip_on. - Don't bother shutting down the chip when updating the lux table. The table is held entirely in the driver and doesn't effect the chip at all. - Drop a redundant i2c call in taos_als_calibrate where the same register is read twice in a row.
2016-10-25iio: maxim_thermocouple: detect invalid storage size in read()Arnd Bergmann
As found by gcc -Wmaybe-uninitialized, having a storage_bytes value other than 2 or 4 will result in undefined behavior: drivers/iio/temperature/maxim_thermocouple.c: In function 'maxim_thermocouple_read': drivers/iio/temperature/maxim_thermocouple.c:141:5: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized] This probably cannot happen, but returning -EINVAL here is appropriate and makes gcc happy and the code more robust. Fixes: 231147ee77f3 ("iio: maxim_thermocouple: Align 16 bit big endian value of raw reads") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-10-01iio: maxim_thermocouple: Align 16 bit big endian value of raw readssayli karnik
Driver was reporting invalid raw read values for MAX6675 on big endian architectures. MAX6675 buffered mode is not affected, nor is the MAX31855. The driver was losing a 2 byte read value when it used a 32 bit integer buffer to store a 16 bit big endian value. Use big endian types to properly align buffers on big endian architectures. Fixes following sparse endianness warnings: warning: cast to restricted __be16 warning: cast to restricted __be32 Fixes checkpatch issue: CHECK: No space is necessary after a cast Signed-off-by: sayli karnik <karniksayli1995@gmail.com> Fixes: 1f25ca11d84a ("iio: temperature: add support for Maxim thermocouple chips") Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-08-29iio: temperature: fix non static symbol warningsWei Yongjun
Fixes the following sparse warnings: drivers/iio/temperature/maxim_thermocouple.c:35:28: warning: symbol 'max6675_channels' was not declared. Should it be static? drivers/iio/temperature/maxim_thermocouple.c:52:28: warning: symbol 'max31855_channels' was not declared. Should it be static? drivers/iio/temperature/maxim_thermocouple.c:98:38: warning: symbol 'maxim_thermocouple_chips' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-By: Matt Ranostay <mranostay@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-08-21iio: temperature: add Kconfig selects for triggered bufferAlison Schofield
Select IIO_BUFFER and IIO_TRIGGERED_BUFFER to compile maxim_thermocouple. Signed-off-by: Alison Schofield <amsfield22@gmail.com> Cc: Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-07-10iio: temperature: add support for Maxim thermocouple chipsMatt Ranostay
Add initial driver support for MAX6675, and MAX31855 thermocouple chips. Cc: Marek Vasut <marex@denx.de> Cc: Matt Porter <mporter@konsulko.com> Signed-off-by: Matt Ranostay <mranostay@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-21iio: Export I2C module alias informationJavier Martinez Canillas
The I2C drivers have an i2c_device_id array but that information isn't exported to the modules using the MODULE_DEVICE_TABLE() macro. So the modules autoloading won't work if the I2C device is registered using OF or legacy board files due missing alias information in the modules. The issue was found using Kieran Bingham's coccinelle semantic patch: https://lkml.org/lkml/2016/5/10/520 Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-27iio: convert to common i2c_check_functionality() return valueMatt Ranostay
Previously most drivers that used a i2c_check_functionality() check condition required various error codes on failure. This patchset converts to a standard of -EOPNOTSUPP Signed-off-by: Matt Ranostay <mranostay@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-11Add tsys02d meas-spec driver supportLudovic Tancerel
Support for TSYS02D temperature sensor Signed-off-by: Ludovic Tancerel <ludovic.tancerel@maplehightech.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-04Add tsys01 meas-spec driver supportLudovic Tancerel
Support for TSYS01 temperature sensor Signed-off-by: Ludovic Tancerel <ludovic.tancerel@maplehightech.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-03iio: mlx96014: Error checking from positive to negativeCrt Mori
Dan Carpenter reported a static checker report and after his mail I noticed that we actually return from function if positive value is obtained from i2c read. This was remainder from when code was not in separate function (which I changed during the review process). Static checker reported drivers/iio/temperature/mlx90614.c:167 mlx90614_iir_search() warn: this cast is a no-op which meant that cast before negating is useless. Dan also proposed a solution on nicer bit operation form. Also changed magic number to macro in process as that was confusing. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Crt Mori <cmo@melexis.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-27iio: mlx90614: Implement filter configurationCrt Mori
Implemented Low pass 3db frequency filter which configures FIR and IIR values within the configuration register of EEPROM. For more standardized interface we have fixed the FIR value to 1024, while changes in IIR value are directly connected to filter responses. The new datasheet version will provide a simplified table (also in reStructured text format below) with this change, to provide quick overview of possible settings. Below sensor timings (bandwidth) are calculated for 3db frequency low pass filter. +--------------------+-----------------+ | Filter setting (%) | Band width (Hz) | | (rounded to 1.0) | | +====================+=================+ | 13 | 0.15 | +--------------------+-----------------+ | 17 | 0.20 | +--------------------+-----------------+ | 25 | 0.31 | +--------------------+-----------------+ | 50 | 0.77 | +--------------------+-----------------+ | 57 | 0.86 | +--------------------+-----------------+ | 67 | 1.10 | +--------------------+-----------------+ | 80 | 1.53 | +--------------------+-----------------+ | 100 | 7.23 | +--------------------+-----------------+ The diff is made towards togreg branch. Added myself to MAINTAINERS and authors as per discussion with Jonathan. Signed-off-by: Crt Mori <cmo@melexis.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-12Merge tag 'iio-for-4.3b-2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of new device support, features and cleanup for the 4.3 cycle. Take 2 also includes a fix set that was too late for the 4.2 cycle. As we had a lot of tools and docs work in this set, I have broken those out into their own categories in this description. Fixes from the pull request '4th set of IIO fixes for the 4.2 cycle'. * Poll functions for both event chardev and the buffer one were returning negative error codes (via a positive value). * A recent change to lsiio adding some error handling that was wrong and stopped the tool working. * bmg160 was missing some dependencies in Kconfig * berlin2-adc had a misshandled register (wrote a value rather than a bitmap) New device support * TI opt3001 light sensor * TXC PA12 ALS and proximity sensor. * mcp3301 ADC support (in mcp320x driver) * ST lsm303agr accelerometer and magnetometer drivers (plus some st-sensors common support to allow different WHOAMI register addresses, devices with fixed scale and allow interrupt equiped magnetometers). * ADIS16305, ADIS16367, ADIS16445IMUs (in the adis16400 driver) * ADIS16266 gyro (in the adis16260 driver) * ADIS16137 gyro (in the adis16136 driver) New functionality * mmc35240 DT bindings. * Inverse unit conversion macros to aid handing of values written to sysfs attributes. Core cleanup * Forward declaration of struct iio_trigger to avoid a compile warning. Driver cleanup / fixes * mxs-lradc - Clarify which parts are supported. - Fix spelling erorrs. - Missing/extra includes - reorder includes - add datasheet name listings for all usable channels (to allow them to be bound by name from consumer drivers) * acpi-als - add some function prefixes as per general iio style. * bmc150_magn - replace a magic value with the existing define. * vf610 - determine possible sample frequencies taking into account the electrical characteristics (defining a minimum sample time) * dht11 - whitespace - additional docs - avoid mulitple assignments in one line - Use the new funciton ktime_get_resolution_ns to cleanup a nasty trick previously used for timing. * Fix all drivers that consider 0 a valid IRQ for historical reasons. * Export I2C module alias info where previously missing (to allow autoprobing) * Export OF module alias info where previously missing. * mmc35240 - switch some variables into arrays to improve readability. * mlx90614 - define some magic numbers for readability. * bmc150_magn - expand area locked by a mutex to cover all the use of the data->buffer. - use descriptive naming for a mask instead of a magic value. * berin2-adc - pass up an error code rather that a generic error - constify the iio_chan_spec - some other little tidy ups. * stk8312 - fix a dependency on triggered buffers in kconfig - add a check for invalid attribute values - improve error handling by returning error codes where possible and return immediately where relevant - rework macro defs to use GENMASK etc - change some variable types to reduce unnecessary casting - clean up code style - drop a local buffer copy for bulk reads and use the one in data->buffer instead. * adis16400 - the adis16448 gyroscope scale was wrong. * adis16480 - some more wrong scales for various parts. * adis16300 - has an undocumented product id and serial number registers so use them. * iio_simple_dummy - fix some wrong code indentation. * bmc150-accel - use the chip ID to detect the chip present rather than verifying the expected part was there. This was in response to a wrong ACPI entry on the WinBook TW100. * mma8452 - fix _get_hp_filter_index - drop a double include - pass up an error code rather than rewriting it - range check input values to attribute writes - register defs tidy up using GENMASK and reordering them to be easier to follow. - various coding style cleanups - put the Kconfig entry in the write place (alphabetically). Tools related * Tools cleanup - drop an explicity NULL comparison, some unnecessary braces, use the ARRAY_SIZE macro, send error messages to stderr instead of dropping them in the middle of normal output. * Fix tools to allow that scale and offset attributes are optional. * More tools fixes including allowing true 32bit data (previously an overflow prevented more than 31bits) * Drop a stray header guard that ended up in a c file. * Make calc_digits static as it isn't exported or in the header. * Set ci_array pointer to NULL after free as a protection against non safe usage of the tools core code. Also convert a double pointer to a single one as the extra level of indirection was unnecessary. Docs * DocBook introduction by Daniel Baluta. Glad we are beginning to draw together some more introductory docs to suplement the various tools / examples. * Drop bytes_per_datum sysfs attribute docs as it no longer exists. * A whole load of missing / fixing of kernel-doc for the core of IIO. * Document the trigger name sysfs attribute in the ABI docs. * Minor typos in the ABI docs related to power down modes.
2015-08-02iio: mlx90614: Define magic numbersCrt Mori
Translates the magic constant numbers to named macros and add some additional comments about their meaning. The diff is made towards togreg branch as that branch seems to have the most recent updates of mlx90614 driver (many are yet to be merged). Signed-off-by: Crt Mori <cmo@melexis.com> Acked-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-07-27Merge 4.2-rc4 into staging-nextGreg Kroah-Hartman
We want the iio and other fixes in this branch as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-20Merge 4.2-rc3 into staging-nextGreg Kroah-Hartman
We need the staging fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-19iio: mlx96014: Replace offset signCrt Mori
Changed the offset to negative as usual equation is: (raw + offset)*scale and in this case offset should be negative (as we deduct 273.15 Kelvin to get temperature in Celsius). Signed-off-by: Crt Mori <cmo@melexis.com> Acked-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-07-19iio: tmp006: Check channel info on writePeter Meerwald
only SAMP_FREQ is writable Will lead to SAMP_FREQ being written by any attempt to write to the other exported attributes and hence a rather unexpected result! Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-07-11iio: Drop owner assignment from i2c_driverKrzysztof Kozlowski
i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-07-05iio: tmp006: Use GENMASKPeter Meerwald
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-07-05iio: tmp006: Check channel info on writePeter Meerwald
only SAMP_FREQ is writable Will lead to SAMP_FREQ being written by any attempt to write to the other exported attributes and hence a rather unexpected result! Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-13iio:temp:mlx90614 trivial drop of unnecessary ret return from write_raw.Jonathan Cameron
This is mostly part of an effort to clean out our current warnings and make the autobuilder build reports more useful. Still a worthwhile if trivial cleanup! Signed-off-by: Jonathan Cameron <jic23@kernel.org> Reported-by: kbuild test robot <fengguang.wu@intel.com> Cc: Vianney le Clément de Saint-Marcq <vianney.leclement@essensium.com> Cc: Peter Meerwald <pmeerw@pmeerw.net>
2015-04-18iio:tmp006: Prefix #defines with TMP006_Peter Meerwald
just cleanup, no functional change Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-04-18iio: mlx90614: Fix duplicate const warningVianney le Clément de Saint-Marcq
Fix a typo triggering a duplicate const warning on some compilers. Signed-off-by: Vianney le Clément de Saint-Marcq <vianney.leclement@essensium.com> Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-04-09iio: mlx90614: Check for errors in read valuesVianney le Clément de Saint-Marcq
The device uses the MSB of the returned temperature value as an error flag. Return a read error when this bit is set. Signed-off-by: Vianney le Clément de Saint-Marcq <vianney.leclement@essensium.com> Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-04-09iio: mlx90614: Add power managementVianney le Clément de Saint-Marcq
Add support for system sleep and runtime power management. To wake up the device, the SDA line should be held low for at least 33ms while SCL is high. As this is not possible using the i2c API (and not supported by all i2c adapters), a GPIO connected to the SDA line is needed. The GPIO is named "wakeup" and can be specified in a device tree with the "wakeup-gpios" binding. If the wake-up GPIO is not given, disable power management for the device. Entering sleep requires an SMBus byte access, hence power management is also disabled if byte access is not supported by the adapter. Signed-off-by: Vianney le Clément de Saint-Marcq <vianney.leclement@essensium.com> Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-04-09iio: mlx90614: Add emissivity settingVianney le Clément de Saint-Marcq
The mapping from the 16-bit EEPROM value to the decimal 0-1 range is approximate. A special case ensures 0xFFFF shows as 1.0 instead of 0.999998565. Writing to EEPROM requires an explicit erase by writing zero. In addition, it takes 20ms for the erase/write to complete. During this time no EEPROM register should be accessed. Therefore, two msleep()s are added to the write function and a mutex protects against concurrent access. Signed-off-by: Vianney le Clément de Saint-Marcq <vianney.leclement@essensium.com> Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-29iio: mlx90614: Support devices with dual IR sensorVianney le Clément de Saint-Marcq
The model is detected by reading the EEPROM configuration during probing. Signed-off-by: Vianney le Clément de Saint-Marcq <vianney.leclement@essensium.com> Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-29iio: mlx90614: Add symbols for accessible registersVianney le Clément de Saint-Marcq
Add symbols for all accessible RAM and EEPROM registers, as well as the sleep command and timings defined in the datasheet. Signed-off-by: Vianney le Clément de Saint-Marcq <vianney.leclement@essensium.com> Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-09iio: mlx90614: Refactor register symbolsVianney le Clément de Saint-Marcq
The defined registers only make sense when used for accessing RAM. Make MLX90614_OP_RAM part of the symbol definition to avoid accidental access to the wrong register. Signed-off-by: Vianney le Clément de Saint-Marcq <vianney.leclement@essensium.com> Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-05-03iio: Add Melexis mlx90614 contact-less infrared temperature sensor driverPeter Meerwald
I2C-controlled sensor measures ambient and object temperatuer see http://www.melexis.com/Infrared-Thermometer-Sensors/Infrared-Thermometer-Sensors/MLX90614-615.aspx Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-25Merge 3.12-rc2 into staging-next.Greg Kroah-Hartman
This resolves the merge problem with two iio drivers that Stephen Rothwell pointed out. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-21iio: Fix tmp006 dev-to-indio_dev conversion in suspend/resumePeter Meerwald
dev_to_iio_dev() is a false friend Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-15iio:temperature:tmp006 put sampling_frequency in info_mask_shared_by_allJonathan Cameron
Doing this makes it possible to access this control from within the kernel. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Acked-by: Peter Meerwald <pmeerw@pmeerw.net> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
2013-08-17iio: Add tmp006 IR temperature sensorPeter Meerwald
the TI TMP006 is a non-contact temperature sensor with I2C interface; it measures the surface temperature of a distance object using a thermopile to absorb IR energy emitted from the object the sensor has two channels: IR sensor voltage (16-bit) and reference temperature of the chip (14-bit); datasheet is here: http://www.ti.com/lit/ds/symlink/tmp006.pdf v2 (thanks to Grygorii Strashko, Lars-Peter Clausen, Jonathan Cameron for review comments): * power down device on driver remove * use sign_extend32() * style cleanup * add comments what channel raw LSBs mean * spelling of thermopile Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Jonathan Cameron <jic23@kernel.org> Cc: LM Sensors <lm-sensors@lm-sensors.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>