summaryrefslogtreecommitdiff
path: root/drivers/iio/temperature
AgeCommit message (Collapse)Author
2023-12-11iio: temperature: mlx90635 MLX90635 IR Temperature sensorCrt Mori
MLX90635 is an Infra Red contactless temperature sensor most suitable for consumer applications where measured object temperature is in range between -20 to 100 degrees Celsius. It has improved accuracy for measurements within temperature range of human body and can operate in ambient temperature range between -20 to 85 degrees Celsius. Driver provides simple power management possibility as it returns to lowest possible power mode (Step sleep mode) in which temperature measurements can still be performed, yet for continuous measuring it switches to Continuous power mode where measurements constantly change without triggering. Signed-off-by: Crt Mori<cmo@melexis.com> Link: https://lore.kernel.org/r/c6590e4fb8d993a5317b486a3e45e1bb6e9e3318.1701872051.git.cmo@melexis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: temperature: Add MCP9600 thermocouple EMF converterAndrew Hepp
Add support for the MCP9600 thermocouple electromotive force converter. The sensor has integrated cold junction compensation and a typical accuracy of 0.5 degrees Celsius. The driver supports a resolution of 0.0625 degrees Celsius. Datasheet: https://ww1.microchip.com/downloads/en/DeviceDoc/MCP960X-Data-Sheet-20005426.pdf Signed-off-by: Andrew Hepp <andrew.hepp@ahepp.dev> Link: https://lore.kernel.org/r/20231025233153.5454-2-andrew.hepp@ahepp.dev Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-09-23iio: temperature: hid-sensor: Convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230919174931.1417681-48-u.kleine-koenig@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-09-12iio: temperature: tmp117: Convert enum->pointer for data in the match tablesBiju Das
Convert enum->pointer for data in the match tables, so that device_get_match_data() can do match against OF/ACPI/I2C tables, once i2c bus type match support added to it. Add struct tmp11x_info and replace enum->struct *tmp11x_info for data in the match table. Drop tmp117_identify() and simplify tmp117_probe() by replacing device_get_match_data() and id lookup for retrieving data by i2c_get_match_data(). Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20230812161154.196555-1-biju.das.jz@bp.renesas.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-09-11iio: mlx90614: Use i2c_get_match_data()Biju Das
Replace device_get_match_data()->i2c_get_match_data() to extend matching support for ID table. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Acked-by: "Crt Mori <cmo@melexis.com>" Link: https://lore.kernel.org/r/20230812162222.200004-1-biju.das.jz@bp.renesas.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-23iio: adc: Explicitly include correct DT includesRob Herring
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20230714174628.4057920-1-robh@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-28iio: temperature: tmp006: Add OF device matching supportAnup Sharma
Adds an of_device_id table entry to the driver, enabling device matching through device tree. With this update, the driver can now match devices using both the i2c_device_id entry and the newly added of_device_id table. Signed-off-by: Anup Sharma <anupnewsmail@gmail.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/72746bdfd8f74171943e41759b891c7af40627ec.1684579603.git.anupnewsmail@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-23iio: mlx90614: Add MLX90615 supportMarek Vasut
Add support for MLX90615 Infra Red Thermometer, which seems to be the predecesor of MLX90614 . There are significant differences in the register layout compared to MLX90614, but the functionality of the device is virtually identical. The following differences have been identified: - RAM/EEPROM/SLEEP access opcodes are different - RAM/EEPROM registers are at different offsets - EEPROM emissivity and configuration registers are at different offsets - EEPROM configuration register bits are shuffled around - EEPROM emissivity settings are 14 bit on MLX90615 , 16 bit on MLX90614 - MLX90615 can only ever support one sensor, MLX90614 could support two - FIR filter is set to fixed settings on MLX90615 - IIR filter coefficients are different This patch fills in the MLX90615 specific description and quirk handling. The IIR filter coefficients were provided by Melexis as follows: 0b0000 - Forbidden value 0b0001 - 100% - settling time = refresh rate = 205ms (around 5Hz) 0b0010 - 50% - settling time = 2050ms (around 0.5Hz) 0b0011 - 33% - settling time = 36900ms (around 0.3Hz) 0b0100 - 25% - settling time = 5125ms (around 0.2Hz) 0b0101 - 20% - settling time = 6355ms (around 0.15Hz) 0b0110 - 17% - settling time = 7790ms (around 0.13Hz) 0b0111 - 14% - settling time = 9225ms (around 0.1Hz) Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Crt Mori <cmo@melexis.com> Link: https://lore.kernel.org/r/20230510102251.10118-6-marex@denx.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-23iio: mlx90614: Factor our register IO and constants into model specific ↵Marek Vasut
descriptor Factor out all the differences between MLX90614 and other similar chips into a structure which describes the chip and allows abstracting out the differences from the driver code. No functional change. This patch moves all the RAM and EEPROM IO opcodes into the descriptor structure and combines them, instead of combining the opcode and offset in macros. Acked-by: Crt Mori <cmo@melexis.com> Tested-by: Crt Mori <cmo@melexis.com> Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20230510102251.10118-5-marex@denx.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-23iio: mlx90614: Drop MLX90614_CONST_EMISSIVITY_RESOLUTIONMarek Vasut
The MLX90614_CONST_EMISSIVITY_RESOLUTION can be calculated from MLX90614_CONST_RAW_EMISSIVITY_MAX, perform the calculation inline and drio the MLX90614_CONST_EMISSIVITY_RESOLUTION. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Crt Mori <cmo@melexis.com> Link: https://lore.kernel.org/r/20230510102251.10118-4-marex@denx.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-23iio: mlx90614: Drop unused register macrosMarek Vasut
To simplify addition of support for new parts, drop unused register macros. No functional change. Acked-by: Crt Mori <cmo@melexis.com> Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20230510102251.10118-3-marex@denx.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-23iio: mlx90614: Sort headersMarek Vasut
Sort the headers alphabetically. No functional change. Acked-by: Crt Mori <cmo@melexis.com> Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20230510102251.10118-2-marex@denx.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-21iio: Switch i2c drivers back to use .probe()Uwe Kleine-König
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230515205048.19561-1-u.kleine-koenig@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-03-11iio: temperature: tmp117: cosmetic alignment cleanupMarco Felsch
Align the code correctly if possible and align the channel bit mask to make it easier to read. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20230228090518.529811-6-m.felsch@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-03-11iio: temperature: tmp117: add TI TMP116 supportMarco Felsch
The TMP116 is the predecessor of the TMP117. The TMP116 don't support custom offset calibration data, instead this register is used as generic EEPROM storage as well. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20230228090518.529811-5-m.felsch@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-03-11iio: temperature: tmp117: improve fallback capabilitiesMarco Felsch
Don't error if the device-id found don't match the device-id for the TMP117 sensor since other TMPxxx might be compatible to the TMP117. The fallback mechanism tries to gather the required information from the of_device_id or from the i2c_client information. The commit also prepares the driver for adding new devices more easily by making use of switch-case at the relevant parts. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20230228090518.529811-3-m.felsch@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: temperature: Add driver support for Maxim MAX30208Rajat Khandelwal
Maxim MAX30208 is a digital temperature sensor with 0.1°C accuracy. Add support for max30208 driver in iio subsystem. Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX30208.pdf Signed-off-by: Rajat Khandelwal <rajat.khandelwal@linux.intel.com> Link: https://lore.kernel.org/r/20221122175300.800956-1-rajat.khandelwal@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: temperature: tsys02d: Convert to i2c's .probe_new()Uwe Kleine-König
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-191-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: temperature: tsys01: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-190-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: temperature: tmp007: Convert to i2c's .probe_new()Uwe Kleine-König
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-189-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: temperature: tmp006: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-188-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: temperature: mlx90632: Convert to i2c's .probe_new()Uwe Kleine-König
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Crt Mori <cmo@melexis.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-187-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: temperature: mlx90614: Convert to i2c's .probe_new()Uwe Kleine-König
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Crt Mori<cmo@melexis.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-186-uwe@kleine-koenig.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: temperature: mlx90632: Add missing static marking on devm_pm_opsJonathan Cameron
Only used within this file, so should be marked static. Fixes: 2aebc223fc7c ("iio: temperature: mlx90632 Add runtime powermanagement modes") Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-off-by: Crt Mori <cmo@melexis.com> Link: https://lore.kernel.org/r/20221105125108.383193-3-jic23@kernel.org
2022-11-23iio: temperature: mlx90632: Add error handling for devm_pm_runtime_enable()Jonathan Cameron
This call can fail so handling is necessary even if it is very unlikely. Reported-by: coverity-bot <keescook+coverity-bot@chromium.org> Addresses-Coverity-ID: 1527134 ("Error handling issues") Fixes: 2aebc223fc7c ("iio: temperature: mlx90632 Add runtime powermanagement modes") Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-off-by: Crt Mori <cmo@melexis.com> Link: https://lore.kernel.org/r/20221105125108.383193-2-jic23@kernel.org
2022-11-23iio: temperature: ltc2983: support more partsCosmin Tanislav
Add support for the following parts: * LTC2984 * LTC2986 * LTM2985 The LTC2984 is a variant of the LTC2983 with EEPROM. The LTC2986 is a variant of the LTC2983 with only 10 channels, EEPROM and support for active analog temperature sensors. The LTM2985 is software-compatible with the LTC2986. Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com> Link: https://lore.kernel.org/r/20221103130041.2153295-14-demonsingur@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: temperature: ltc2983: make bulk write buffer DMA-safeCosmin Tanislav
regmap_bulk_write() does not guarantee implicit DMA-safety, even though the current implementation duplicates the given buffer. Do not rely on it. Fixes: f110f3188e56 ("iio: temperature: Add support for LTC2983") Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com> Link: https://lore.kernel.org/r/20221103130041.2153295-2-demonsingur@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: temperature: mlx90632 Style alignment for the driverCrt Mori
Changing and aligning the overall style of the driver with the recent reviews. There is no functional change, only type generalization and moving to the reverse Christmas tree for variable declarations. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Crt Mori <cmo@melexis.com> Link: https://lore.kernel.org/r/d59aad00891c1a64e044a0f5bc7d40e42d47e9c7.1666606912.git.cmo@melexis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: temperature: mlx90632 Change return value of sensor measurement channelCrt Mori
The current EINVAL value is more applicable to embedded library, where user can actually put the fixed value to the sensor. In case of the driver if the value of the channel is invalid it is better in inform userspace that Channel was out of range as that implies more to internal driver error than invalid input. It also makes for easier debugging of where the error comes from during the development. Signed-off-by: Crt Mori <cmo@melexis.com> Link: https://lore.kernel.org/r/565d4df2592d751dc0f40908f2569b7c9af8e56e.1663834141.git.cmo@melexis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: temperature: mlx90632 Read sampling frequencyCrt Mori
Allow users to read sensor sampling frequency to better plan the application measurement requests. Signed-off-by: Crt Mori <cmo@melexis.com> Link: https://lore.kernel.org/r/0bd6d6d665b4bd39e4565f6f44cb1bdc03386e23.1663834141.git.cmo@melexis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: temperature: mlx90632 Add runtime powermanagement modesCrt Mori
The sensor can operate in lower power modes and even make measurements when in those lower powered modes. The decision was taken that if measurement is not requested within 2 seconds the sensor will remain in SLEEP_STEP power mode, where measurements are triggered on request with setting the start of measurement bit (SOB). In this mode the measurements are taking a bit longer because we need to start it and complete it. Currently, in continuous mode we read ready data and this mode is activated if sensor measurement is requested within 2 seconds. The suspend timeout is increased to 6 seconds (instead of 3 before), because that enables more measurements in lower power mode (SLEEP_STEP), with the lowest refresh rate (2 seconds). Signed-off-by: Crt Mori <cmo@melexis.com> Link: https://lore.kernel.org/r/be405068f081f2d518843897b13cd0289c280b5d.1663834141.git.cmo@melexis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-10-17iio: temperature: ltc2983: allocate iio channels onceCosmin Tanislav
Currently, every time the device wakes up from sleep, the iio_chan array is reallocated, leaking the previous one until the device is removed (basically never). Move the allocation to the probe function to avoid this. Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com> Fixes: f110f3188e563 ("iio: temperature: Add support for LTC2983") Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/20221014123724.1401011-2-demonsingur@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-10-08Merge tag 'char-misc-6.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the large set of char/misc and other small driver subsystem changes for 6.1-rc1. Loads of different things in here: - IIO driver updates, additions, and changes. Probably the largest part of the diffstat - habanalabs driver update with support for new hardware and features, the second largest part of the diff. - fpga subsystem driver updates and additions - mhi subsystem updates - Coresight driver updates - gnss subsystem updates - extcon driver updates - icc subsystem updates - fsi subsystem updates - nvmem subsystem and driver updates - misc driver updates - speakup driver additions for new features - lots of tiny driver updates and cleanups All of these have been in the linux-next tree for a while with no reported issues" * tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits) w1: Split memcpy() of struct cn_msg flexible array spmi: pmic-arb: increase SPMI transaction timeout delay spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes spmi: pmic-arb: correct duplicate APID to PPID mapping logic spmi: pmic-arb: add support to dispatch interrupt based on IRQ status spmi: pmic-arb: check apid against limits before calling irq handler spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq spmi: pmic-arb: handle spurious interrupt spmi: pmic-arb: add a print in cleanup_irq drivers: spmi: Directly use ida_alloc()/free() MAINTAINERS: add TI ECAP driver info counter: ti-ecap-capture: capture driver support for ECAP Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items dt-bindings: counter: add ti,am62-ecap-capture.yaml counter: Introduce the COUNTER_COMP_ARRAY component type counter: Consolidate Counter extension sysfs attribute creation counter: Introduce the Count capture component counter: 104-quad-8: Add Signal polarity component counter: Introduce the Signal polarity component counter: interrupt-cnt: Implement watch_validate callback ...
2022-09-21iio: temperature: mlx90614 Refactoring available filter attributesCrt Mori
Change/refactor to the new way of defining available attribute values. Signed-off-by: Crt Mori <cmo@melexis.com> Link: https://lore.kernel.org/r/20220906112632.244453-1-cmo@melexis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-16i2c: Make remove callback return voidUwe Kleine-König
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-15iio: temperature: mlx90632 Add supply regulator to sensorCrt Mori
Provide possibility to toggle power supply to the sensor so that user can optimize their setup and not have the sensor constantly powered. Signed-off-by: Crt Mori <cmo@melexis.com> Link: https://lore.kernel.org/r/20220808144908.1559069-1-cmo@melexis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-07-18iio: temperature: ltc2983: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and ↵Jonathan Cameron
pm_sleep_ptr() Using these newer macros allows the compiler to remove the unused structure and functions when !CONFIG_PM_SLEEP + removes the need to mark pm functions __maybe_unused. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Nuno Sá <nuno.sa@analog.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20220621202719.13644-26-jic23@kernel.org
2022-06-14iio: temp: maxim_thermocouple: Fix alignment for DMA safetyJonathan Cameron
____cacheline_aligned is an insufficient guarantee for non-coherent DMA on platforms with 128 byte cachelines above L1. Switch to the updated IIO_DMA_MINALIGN definition Fixes: 1f25ca11d84a ("iio: temperature: add support for Maxim thermocouple chips") Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Matt Ranostay <mranostay@gmail.com> Acked-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20220508175712.647246-93-jic23@kernel.org
2022-06-14iio: temp: max31865: Fix alignment for DMA safetyJonathan Cameron
____cacheline_aligned is an insufficient guarantee for non-coherent DMA on platforms with 128 byte cachelines above L1. Switch to the updated IIO_DMA_MINALIGN definition Fixes: e112dc4e18ea ("iio: temperature: Add MAX31865 RTD Support") Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Navin Sankar Velliangiri <navin@linumiz.com> Acked-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20220508175712.647246-92-jic23@kernel.org
2022-06-14iio: temp: ltc2983: Fix alignment for DMA safetyJonathan Cameron
____cacheline_aligned is an insufficient guarantee for non-coherent DMA on platforms with 128 byte cachelines above L1. Switch to the updated IIO_DMA_MINALIGN definition. Fixes: f110f3188e56 ("iio: temperature: Add support for LTC2983") Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20220508175712.647246-91-jic23@kernel.org
2022-04-28iio: temperature: max31865: Make use of device propertiesAndy Shevchenko
Convert the module to be property provider agnostic and allow it to be used on non-OF platforms. Add mod_devicetable.h include. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220413185335.21743-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-28iio: temperature: max31856: Make use of device propertiesAndy Shevchenko
Convert the module to be property provider agnostic and allow it to be used on non-OF platforms. Add missing mod_devicetable.h include. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220413185044.21588-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-04iio: temperature: ltc2983: Make use of device propertiesAndy Shevchenko
Convert the module to be property provider agnostic and allow it to be used on non-OF platforms. The conversion slightly changes the logic behind property reading for the configuration values. Original code allocates just as much memory as needed. Then for each separate 32- or 64-bit value it reads it from the property and converts to a raw one which will be fed to the sensor. In the new code we allocate the amount of memory needed to retrieve all values at once from the property and then convert them as required. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Tested-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20220307203606.87258-3-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-04iio: temperature: ltc2983: Use single error path to put OF nodeAndy Shevchenko
There are several, possibly copied'n'pasted, places in the functions, where OF node is put and error returned directly, while the common exit point exists. Unify all these cases to use a single error path. Suggested-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20220307203606.87258-2-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-04iio: temperature: ltc2983: Don't hard code defined constants in messagesAndy Shevchenko
In a couple of messages the constants, which have their definitions, are hard coded into the message text. Unhardcode them. While at it, add a trailing \n where it's currently missing. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20220307203606.87258-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-03-28Merge tag 'char-misc-5.18-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the big set of char/misc and other small driver subsystem updates for 5.18-rc1. Included in here are merges from driver subsystems which contain: - iio driver updates and new drivers - fsi driver updates - fpga driver updates - habanalabs driver updates and support for new hardware - soundwire driver updates and new drivers - phy driver updates and new drivers - coresight driver updates - icc driver updates Individual changes include: - mei driver updates - interconnect driver updates - new PECI driver subsystem added - vmci driver updates - lots of tiny misc/char driver updates All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits) firmware: google: Properly state IOMEM dependency kgdbts: fix return value of __setup handler firmware: sysfb: fix platform-device leak in error path firmware: stratix10-svc: add missing callback parameter on RSU arm64: dts: qcom: add non-secure domain property to fastrpc nodes misc: fastrpc: Add dma handle implementation misc: fastrpc: Add fdlist implementation misc: fastrpc: Add helper function to get list and page misc: fastrpc: Add support to secure memory map dt-bindings: misc: add fastrpc domain vmid property misc: fastrpc: check before loading process to the DSP misc: fastrpc: add secure domain support dt-bindings: misc: add property to support non-secure DSP misc: fastrpc: Add support to get DSP capabilities misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP misc: fastrpc: separate fastrpc device from channel context dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells dt-bindings: nvmem: make "reg" property optional nvmem: brcm_nvram: parse NVRAM content into NVMEM cells nvmem: dt-bindings: Fix the error of dt-bindings check ...
2022-02-18iio:temperature:mlx90614: Switch from CONFIG_PM* guards to pm_ptr() etcJonathan Cameron
Letting the compiler remove these functions when the kernel is built without one or more of CONFIG_PM/CONFIG_PM_SLEEP support is simpler and less error prone than the use of #ifdef based config guards. Removing instances of this approach from IIO also stops them being copied into new drivers. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Crt Mori <cmo@melexis.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20220130193147.279148-43-jic23@kernel.org
2022-02-18iio:temperature:tmp007: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() etcJonathan Cameron
Letting the compiler remove these functions when the kernel is built without CONFIG_PM_SLEEP support is simpler and less error prone than the use of #ifdef based config guards. Removing instances of this approach from IIO also stops them being copied into new drivers. Acked-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20220130193147.279148-38-jic23@kernel.org
2022-02-18iio:temperature:tmp006: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() etcJonathan Cameron
Letting the compiler remove these functions when the kernel is built without CONFIG_PM_SLEEP support is simpler and less error prone than the use of #ifdef based config guards. Removing instances of this approach from IIO also stops them being copied into new drivers. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20220130193147.279148-37-jic23@kernel.org
2022-02-18iio:common:meas-spec: Move exports into IIO_MEAS_SPEC_SENSORSJonathan Cameron
The obvious choice of ms_sensors felt rather too likely to clash with other namespaces introduced in future, hence the longer abbreviation. In order to avoid unnecessary pollution of the global symbol namespace move the common/library functions into a specific namespace and import that into the various specific device drivers that use them. For more information see https://lwn.net/Articles/760045/ Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: William Markezana <william.markezana@meas-spec.com> Cc: Ludovic Tancerel <ludovic.tancerel@maplehightech.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220130205701.334592-5-jic23@kernel.org
generated by cgit (git 2.34.1) at 2024-05-30 04:08:40 +0000