| Age | Commit message (Collapse) | Author |
|---|
|
Add 16B Management Packet definition. This optimized packet
format replaces the ib_other_headers and BTH with a source
and destination QP number.
To support these packets we introduce struct opa_16b_mgmt
into the struct hfi1_16b_header.
This packet format is only used for MAD packets using the
IB_OPCODE_UD_SEND_ONLY opcode on QP0/1.
The original 16B implementation failed to use 16B management
packets so now we add their definition.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Moving receive-side WQE allocation logic into rdmavt will allow
further code reuse between qib and hfi1 drivers.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The packet fault injection code present in the HFI1 driver had some
issues which not only fragment the code but also created user
confusion. Furthermore, it suffered from the following issues:
1. The fault_packet method only worked for received packets. This
meant that the only fault injection mode available for sent
packets is fault_opcode, which did not allow for random packet
drops on all egressing packets.
2. The mask available for the fault_opcode mode did not really work
due to the fact that the opcode values are not bits in a bitmask but
rather sequential integer values. Creating a opcode/mask pair that
would successfully capture a set of packets was nearly impossible.
3. The code was fragmented and used too many debugfs entries to
operate and control. This was confusing to users.
4. It did not allow filtering fault injection on a per direction basis -
egress vs. ingress.
In order to improve or fix the above issues, the following changes have
been made:
1. The fault injection methods have been combined into a single fault
injection facility. As such, the fault injection has been plugged
into both the send and receive code paths. Regardless of method used
the fault injection will operate on both egress and ingress packets.
2. The type of fault injection - by packet or by opcode - is now controlled
by changing the boolean value of the file "opcode_mode". When the value
is set to True, fault injection is done by opcode. Otherwise, by
packet.
2. The masking ability has been removed in favor of a bitmap that holds
opcodes of interest (one bit per opcode, a total of 256 bits). This
works in tandem with the "opcode_mode" value. When the value of
"opcode_mode" is False, this bitmap is ignored. When the value is
True, the bitmap lists all opcodes to be considered for fault injection.
By default, the bitmap is empty. When the user wants to filter by opcode,
the user sets the corresponding bit in the bitmap by echo'ing the bit
position into the 'opcodes' file. This gets around the issue that the set
of opcodes does not lend itself to effective masks and allow for extremely
fine-grained filtering by opcode.
4. fault_packet and fault_opcode methods have been combined. Hence, there
is only one debugfs directory controlling the entire operation of the
fault injection machinery. This reduces the number of debugfs entries
and provides a more unified user experience.
5. A new control files - "direction" - is provided to allow the user to
control the direction of packets, which are subject to fault injection.
6. A new control file - "skip_usec" - is added that would allow the user
to specify a "timeout" during which no fault injection will occur.
In addition, the following bug fixes have been applied:
1. The fault injection code has been split into its own header and source
files. This was done to better organize the code and support conditional
compilation without littering the code with #ifdef's.
2. The method by which the TX PIO packets were being marked for drop
conflicted with the way send contexts were being setup. As a result,
the send context was repeatedly being reset.
3. The fault injection only makes sense when the user can control it
through the debugfs entries. However, a kernel configuration can
enable fault injection but keep fault injection debugfs entries
disabled. Therefore, it makes sense that the HFI fault injection
code depends on both.
4. Error suppression did not take into account the method by which PIO
packets were being dropped. Therefore, even with error suppression
turned on, errors would still be displayed to the screen. A larger
enough packet drop percentage would case the kernel to crash because
the driver would be stuck printing errors.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
These values were introduced as part of the 16B code to
account for the varying size of the LRH between the differing
packet formats.
Replace the blind constants with defines based on FIELD_SIZEOF()
calls.
Fixes: 5b6cabb0db77 ("IB/hfi1: Add 16B RC/UC support")
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
In the receive path, hfi1_ibport is looked up by indexing into an
array. A profile shows this to be expensive. The receive context
data has a pointer to the ibport data, use that pointer instead.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The packet type comparison used to find out if a packet is a bypass
packet in the hot path is an expensive operation as seen in a profile.
Determine packet's pkey and migration bit through the bypass and 9B
code paths instead.
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The s_hdrwords variable was used to indicate whether a
packet was already built on a previous iteration of the
send engine. This variable assumed the protection of the
QP's RVT_S_BUSY flag, which was required since the the
QP's s_lock was dropped just prior to the packet being
queued on the one of the egress mechanisms.
Support for multiple send engine instantiations require
that the field not be used due to concurency issues.
The ps.txreq signals the "already built" without the
potential concurency issues.
Fix by getting rid of all s_hdrword usage. A wrapper
is added to test for the already built case that used to
use s_hdrwords.
What used to be stored in s_hdrwords is now in the txreq.
The PBC is not counted, but is added in the pio/sdma code
paths prior to posting the packet.
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Remove HFI1_VERBS_31BIT_PSN Kconfig option leaving only 31-bit PSNs
available. The option was implemented in the early days of the driver
and is no longer needed.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Grzegorz Morys <grzegorz.morys@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
PIO/SDMA send logic now uses the hdr_type field to determine
the type of packet that has been constructed. Based on the hdr_type,
certain things such as PBC flags, padding count and the LT extra
trailing bytes are determined.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Add 16B bypass packet support for RC/UC traffic types.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Increase lid used in hfi1 driver to 32 bits. qib continues
to use 16 bit lids.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Add 16B bypass packet support for UD traffic types.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
When address handle attributes are initialized, the LIDs are
transformed to be in the 32 bit LID space.
When constructing the header, hfi1 driver will look at the LID
to determine the packet header to be created.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Enhance hdr_rcverr() to also handle errors during
16B bypass packet receive.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
We introduce struct hfi1_opa_header as a union
of ib (9B) and 16B headers.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
We introduce a struct hfi1_16b_header to support 16B headers.
16B bypass packets are received by the driver and processed
similar to 9B packets. Add basic support to handle 16B packets.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
When an egress resource(SDMA descriptors, pio credits) is not available,
a sending thread will be put on the resource's wait queue. When the
resource becomes available again, up to a fixed number of sending threads
can be awakened sequentially and removed from the wait queue, depending
on the number of waiting threads and the number of free resources. Since
each awakened sending thread will send as many packets as possible, it
is highly likely that the first sending thread will consume all the
egress resources. Subsequently, it will be put back to the end of the wait
queue. Depending on the timing when the later sending threads wake up,
they may not be able to send any packet and be again put back to the end
of the wait queue sequentially, right behind the first sending thread.
This starvation cycle continues until some sending threads exceed their
retry limit and consequently fail.
This patch fixes the issue by two simple approaches:
(1) Any starved sending thread will be put to the head of the wait queue
while a served sending thread will be put to the tail;
(2) The most starved sending thread will be served first.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
According to IBTA spec a QKey violation should not result in a bad qkey
trap being triggered for UD queue pairs. Also since it is a silent error
we do not increment the q_key violation or the dropped packet counters.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
We move many common IB fields into the hfi1_packet structure and
set them up in a single function. This allows us to set the fields
in a single place and not deal with them throughout the driver.
Reviewed-by: Brian Welty <brian.welty@intel.com>
Reviewed-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
When there are many RC QPs and an RDMA READ request
is sent, timeouts occur on the requester side because
of fairness among RC QPs on their relative SDMA engine
on the responder side. This also hits write and send, but
to a lesser extent.
Complicating the issue is that the current code checks if workqueue
is congested before scheduling other QPs, however, this
check is based on the number of active entries in the
workqueue, which was found to be too big to for
workqueue_congested() to be effective.
Fix by reducing the number of active entries as revealed by
experimentation from the default of num_sdma to
HFI1_MAX_ACTIVE_WORKQUEUE_ENTRIES. Retry counts were monitored
to determine the correct value.
Tracing to investigate any future issues is also added.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This field is causing excessive cache line bouncing.
There are spare bytes in the r_lock cache line so the best approach
is to make an rvt QP field and remove from the hfi1 priv field.
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Modify core and driver components to use accessor functions
introduced to access individual fields of rdma_ah_attr
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This patch simply renames struct ib_ah_attr to
rdma_ah_attr as these fields specify attributes that are
not necessarily specific to IB.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The driver progress routines can call cond_resched() when
a timeslice is exhausted and irqs are enabled.
If the ULP had been holding a spin lock without disabling irqs and
the post send directly called the progress routine, the cond_resched()
could yield allowing another thread from the same ULP to deadlock
on that same lock.
Correct by replacing the current hfi1_do_send() calldown with a unique
one for post send and adding an argument to hfi1_do_send() to indicate
that the send engine is running in a thread. If the routine is not
running in a thread, avoid calling cond_resched().
CC: <stable@vger.kernel.org> # 4.7.x-
Fixes: Commit 831464ce4b74 ("IB/hfi1: Don't call cond_resched in atomic mode when sending packets")
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Add ability to fault packets on transmit by opcode.
Dropping by packet can be achieved by setting the mask to 0.
In order to drop non-verbs traffic we set PbcInsertHrc
to NONE (0x2). The packet will still be delivered to
the receiving node but a KHdrHCRCErr (KDETH packet
with a bad HCRC) will be triggered and the packet will
not be delivered to the correct context.
In order to drop regular verbs traffic we set the
PbcTestEbp flag. The packet will still be delivered
to the receiving node but a 'late ebp error' will
be triggered and will be dropped.
A global toggle (/sys/kernel/debug/hfi1/hfi1_X/fault_suppress_err)
has been added to suppress the error messages on the receive
node when a packet was faulted on the sending node.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Add fault injection capability:
- Drop packets unconditionally (fault_by_packet)
- Drop packets based on opcode (fault_by_opcode)
This feature reacts to the global FAULT_INJECTION
config flag.
The faulting traces have been added:
- misc/fault_opcode
- misc/fault_packet
See 'Documentation/fault-injection/fault-injection.txt'
for details.
Examples:
- Dropping packets by opcode:
/sys/kernel/debug/hfi1/hfi1_X/fault_opcode
# Enable fault
echo Y > fault_by_opcode
# Setprobability of dropping (0-100%)
# echo 25 > probability
# Set opcode
echo 0x64 > opcode
# Number of times to fault
echo 3 > times
# An optional mask allows you to fault
# a range of opcodes
echo 0xf0 > mask
/sys/kernel/debug/hfi1/hfi1_X/fault_stats
contains a value in parentheses to indicate
number of each opcode dropped.
- Dropping packets unconditionally
/sys/kernel/debug/hfi1/hfi1_X/fault_packet
# Enable fault
echo Y > fault_by_packet
/sys/kernel/debug/hfi1/hfi1_X/fault_packet/fault_stats
contains the number of packets dropped.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
To improve code reuse, add small SGE state helper routines to rdmavt_mr.h.
Leverage these in hfi1, including refactoring of hfi1_copy_sge.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Convert copy_sge and related SGE state functions to use boolean.
For determining if QP is in user mode, add helper function in rdmavt_qp.h.
This is used to determine if QP needs the last byte ordering.
While here, change rvt_pd.user to a boolean.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Reduce hfi1 code footprint by using the rdmavt timers.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Add rvt_compute_aeth() and rvt_get_credit() as shared functions in
rdmavt, moved from hfi1/qib logic.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Add rvt_rc_error() and rvt_comm_est() as shared functions in
rdmavt, moved from hfi1/qib logic.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This patch consolidates the node GUIDs and the port GUID handling
and unifies access to these items. The knowledge of hfi1 GUIDs'
design and their location are kept in accessors to centralize access.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Jakub Pawlak <jakub.pawlak@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Profiling suggests that the read_seqbegin() in
the txreq put logic is colliding with other uses
of the iowait lock.
The packet at a time use of this lock dictates a unique
lock to avoid reader/writer collisions when the number
of vTxWait events is low.
In order to support a unique lock the iowait struct embedded
in the QP is extended to remember the lock that protects the queue
head.
The QP destroy removes that QP from any wait list. It doesn't
need to know the head because of the linked list API, but it does
need to know the lock required to protect the head.
This also opens up the wait logic to have unique per resources locks
which needs to be in future refinement.
Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This allows for adding additional pages of adaptive pio
opcode control including manufacturer specific ones.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Use common header file structs, defines, and accessors
in the drivers. The old declarations are removed.
The repositioning of the includes allows for the removal
of hfi1_message_header and replaces its use with ib_header.
Also corrected are two issues with set_armed_to_active():
- The "packet" parameter is now a pointer as it should have been
- The etype is validated to insure that the header is correct
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
hfi1_pio_header should really be called hfi1_sdma_header
as it is only used for sdma transmits.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Dean Luick <dean.luick@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
struct ahg_ib_header has no header specific information.
Rename it to struct hfi1_ahg_info
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
sde and hfi1_ib_header are not used anymore.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Dean Luick <dean.luick@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
A new union member "ieth" (Invalidate Extended Transport Header) is
added to the packet header definition in preparation of supporting
the send with invalidate opcode.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The TODO list for the hfi1 driver was completed during 4.6. In addition
other objections raised (which are far beyond what was in the TODO list)
have been addressed as well. It is now time to remove the driver from
staging and into the drivers/infiniband sub-tree.
Reviewed-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
