summaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw/mlx5
AgeCommit message (Collapse)Author
2018-06-19IB/mlx5: Add DEVX query EQN supportYishai Hadas
Return the matching device EQN for a given user vector number via the DEVX interface. Note: EQs are owned by the kernel and shared by all user processes. Basically, a user CQ can point to any EQ. The kernel doesn't enforce any such limitation today either. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-19IB/mlx5: Add DEVX support for memory registrationYishai Hadas
Add support to register a memory with the firmware via the DEVX interface. The driver translates a given user address to ib_umem then it will register the physical addresses with the firmware and get a unique id for this registration to be used for this virtual address. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-19IB/mlx5: Add support for DEVX query UARYishai Hadas
Return a device UAR index for a given user index via the DEVX interface. Security note: The hardware protection mechanism works like this: Each device object that is subject to UAR doorbells (QP/SQ/CQ) gets a UAR ID (called uar_page in the device specification manual) upon its creation. Then upon doorbell, hardware fetches the object context for which the doorbell was rang, and validates that the UAR through which the DB was rang matches the UAR ID of the object. If no match the doorbell is silently ignored by the hardware. Of course, the user cannot ring a doorbell on a UAR that was not mapped to it. Now in devx, as the devx kernel does not manipulate the QP/SQ/CQ command mailboxes (except tagging them with UID), we expose to the user its UAR ID, so it can embed it in these objects in the expected specification format. So the only thing the user can do is hurt itself by creating a QP/SQ/CQ with a UAR ID other than his, and then in this case other users may ring a doorbell on its objects. The consequence of that will be that another user can schedule a QP/SQ of the buggy user for execution (just insert it to the hardware schedule queue or arm its CQ for event generation), no further harm is expected. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-19IB/mlx5: Add DEVX support for modify and query commandsYishai Hadas
Add support in DEVX for modify and query commands, the required lock is taken (i.e. READ/WRITE) by the KABI infrastructure accordingly. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-19IB/mlx5: Add obj create and destroy functionalityYishai Hadas
Add support to create and destroy firmware objects via the DEVX interface. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-19IB/mlx5: Add support for DEVX general commandYishai Hadas
Add support to run general firmware command via the DEVX interface. A command that works on some object (e.g. CQ, WQ, etc.) will be added in next patches while maintaining the required object lock. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-19IB/mlx5: Introduce DEVXYishai Hadas
Introduce DEVX to enable direct device commands in downstream patches from this series. In that mode of work the firmware manages the isolation between processes' resources and as such a DEVX user id is created and assigned to the given user context upon allocation request. A capability check is done to make sure that this feature is really supported by the firmware prior to creating the DEVX user id. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-18IB/core: add max_send_sge and max_recv_sge attributesSteve Wise
This patch replaces the ib_device_attr.max_sge with max_send_sge and max_recv_sge. It allows ulps to take advantage of devices that have very different send and recv sge depths. For example cxgb4 has a max_recv_sge of 4, yet a max_send_sge of 16. Splitting out these attributes allows much more efficient use of the SQ for cxgb4 with ulps that use the RDMA_RW API. Consider a large RDMA WRITE that has 16 scattergather entries. With max_sge of 4, the ulp would send 4 WRITE WRs, but with max_sge of 16, it can be done with 1 WRITE WR. Acked-by: Sagi Grimberg <sagi@grimberg.me> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Acked-by: Shiraz Saleem <shiraz.saleem@intel.com> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-18RDMA: Convert drivers to use sgid_attr instead of sgid_indexParav Pandit
The core code now ensures that all driver callbacks that receive an rdma_ah_attrs will have a sgid_attr's pointer if there is a GRH present. Drivers can use this pointer instead of calling a query function with sgid_index. This simplifies the drivers and also avoids races where a gid_index lookup may return different data if it is changed. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-06-18RDMA: Use GID from the ib_gid_attr during the add_gid() callbackParav Pandit
Now that ib_gid_attr contains the GID, make use of that in the add_gid() callback functions for the provider drivers to simplify the add_gid() implementations. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-12treewide: kvzalloc() -> kvcalloc()Kees Cook
The kvzalloc() function has a 2-factor argument form, kvcalloc(). This patch replaces cases of: kvzalloc(a * b, gfp) with: kvcalloc(a * b, gfp) as well as handling cases of: kvzalloc(a * b * c, gfp) with: kvzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kvcalloc(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kvzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kvzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kvzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kvzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kvzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kvzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kvzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kvzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kvzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kvzalloc( - sizeof(char) * COUNT + COUNT , ...) | kvzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kvzalloc + kvcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kvzalloc + kvcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kvzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kvzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kvzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kvzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kvzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kvzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kvzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kvzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kvzalloc(C1 * C2 * C3, ...) | kvzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kvzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kvzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kvzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kvzalloc(sizeof(THING) * C2, ...) | kvzalloc(sizeof(TYPE) * C2, ...) | kvzalloc(C1 * C2 * C3, ...) | kvzalloc(C1 * C2, ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - (E1) * E2 + E1, E2 , ...) | - kvzalloc + kvcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kvzalloc + kvcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-07Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma updates from Jason Gunthorpe: "This has been a quiet cycle for RDMA, the big bulk is the usual smallish driver updates and bug fixes. About four new uAPI related things. Not as much Szykaller patches this time, the bugs it finds are getting harder to fix. Summary: - More work cleaning up the RDMA CM code - Usual driver bug fixes and cleanups for qedr, qib, hfi1, hns, i40iw, iw_cxgb4, mlx5, rxe - Driver specific resource tracking and reporting via netlink - Continued work for name space support from Parav - MPLS support for the verbs flow steering uAPI - A few tricky IPoIB fixes improving robustness - HFI1 driver support for the '16B' management packet format - Some auditing to not print kernel pointers via %llx or similar - Mark the entire 'UCM' user-space interface as BROKEN with the intent to remove it entirely. The user space side of this was long ago replaced with RDMA-CM and syzkaller is finding bugs in the residual UCM interface nobody wishes to fix because nobody uses it. - Purge more bogus BUG_ON's from Leon - 'flow counters' verbs uAPI - T10 fixups for iser/isert, these are Acked by Martin but going through the RDMA tree due to dependencies" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (138 commits) RDMA/mlx5: Update SPDX tags to show proper license RDMA/restrack: Change SPDX tag to properly reflect license IB/hfi1: Fix comment on default hdr entry size IB/hfi1: Rename exp_lock to exp_mutex IB/hfi1: Add bypass register defines and replace blind constants IB/hfi1: Remove unused variable IB/hfi1: Ensure VL index is within bounds IB/hfi1: Fix user context tail allocation for DMA_RTAIL IB/hns: Use zeroing memory allocator instead of allocator/memset infiniband: fix a possible use-after-free bug iw_cxgb4: add INFINIBAND_ADDR_TRANS dependency IB/isert: use T10-PI check mask definitions from core layer IB/iser: use T10-PI check mask definitions from core layer RDMA/core: introduce check masks for T10-PI offload IB/isert: fix T10-pi check mask setting IB/mlx5: Add counters read support IB/mlx5: Add flow counters read support IB/mlx5: Add flow counters binding support IB/mlx5: Add counters create and destroy support IB/uverbs: Add support for flow counters ...
2018-06-05RDMA/mlx5: Update SPDX tags to show proper licenseLeon Romanovsky
Mellanox code is supposed to be OpenIB compliant code, so let's update SPDX tags to show it. Fixes: fc385b7ac480 ("IB/mlx5: Add basic regiser/unregister representors code") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-04Merge tag 'verbs_flow_counters' of ↵Jason Gunthorpe
git://git.kernel.org/pub/scm/linux/kernel/git/leon/linux-rdma.git into for-next Pull verbs counters series from Leon Romanovsky: ==================== Verbs flow counters support This series comes to allow user space applications to monitor real time traffic activity and events of the verbs objects it manages, e.g.: ibv_qp, ibv_wq, ibv_flow. The API enables generic counters creation and define mapping to association with a verbs object, the current mlx5 driver is using this API for flow counters. With this API, an application can monitor the entire life cycle of object activity, defined here as a static counters attachment. This API also allows dynamic counters monitoring of measurement points for a partial period in the verbs object life cycle. In addition it presents the implementation of the generic counters interface. This will be achieved by extending flow creation by adding a new flow count specification type which allows the user to associate a previously created flow counters using the generic verbs counters interface to the created flow, once associated the user could read statistics by using the read function of the generic counters interface. The API includes: 1. create and destroyed API of a new counters objects 2. read the counters values from HW Note: Attaching API to allow application to define the measurement points per objects is a user space only API and this data is passed to kernel when the counted object (e.g. flow) is created with the counters object. =================== * tag 'verbs_flow_counters': IB/mlx5: Add counters read support IB/mlx5: Add flow counters read support IB/mlx5: Add flow counters binding support IB/mlx5: Add counters create and destroy support IB/uverbs: Add support for flow counters IB/core: Add support for flow counters IB/core: Support passing uhw for create_flow IB/uverbs: Add read counters support IB/core: Introduce counters read verb IB/uverbs: Add create/destroy counters support IB/core: Introduce counters object and its create/destroy IB/uverbs: Add an ib_uobject getter to ioctl() infrastructure net/mlx5: Export flow counter related API net/mlx5: Use flow counter pointer as input to the query function
2018-06-02IB/mlx5: Add counters read supportRaed Salem
This patch implements the uverbs counters read API, it will use the specific read counters function to the given type to accomplish its task. Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Raed Salem <raeds@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-02IB/mlx5: Add flow counters read supportRaed Salem
Implements the flow counters read wrapper. Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Raed Salem <raeds@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-02IB/mlx5: Add flow counters binding supportRaed Salem
Associates a counters with a flow when IB_FLOW_SPEC_ACTION_COUNT is part of the flow specifications. The counters user space placements of location and description (index, description) pairs are passed as private data of the counters flow specification. Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Raed Salem <raeds@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-02IB/mlx5: Add counters create and destroy supportRaed Salem
This patch implements the device counters create and destroy APIs and introducing some internal management structures. Downstream patches in this series will add the functionality to support flow counters binding and reading. Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Raed Salem <raeds@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-02IB/core: Support passing uhw for create_flowMatan Barak
This is required when user-space drivers need to pass extra information regarding how to handle this flow steering specification. Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-01RDMA/mlx5: Don't check return value of zap_vma_ptes()Leon Romanovsky
There is no need to check return value of zap_vma_ptes() because there is nothing to do with this knowledge. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-30RDMA/uverbs: Hoist the common process of disassociate_ucontext into ib coreWei Hu(Xavier)
This patch hoisted the common process of disassociate_ucontext callback function into ib core code, and these code are common to ervery ib_device driver. Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-29Merge branch 'mini_cqe' into ↵Jason Gunthorpe
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma for-next Leon Romanovsky says: ==================== Introduce new internal to mlx5 CQE format - mini-CQE. It is a CQE in compressed form that holds data needed to extra a single full CQE. It is a stride index, byte count and packet checksum. ==================== * mini_cqe: IB/mlx5: Introduce a new mini-CQE format IB/mlx5: Refactor CQE compression response net/mlx5: Exposing a new mini-CQE format Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-29IB/mlx5: Introduce a new mini-CQE formatYonatan Cohen
The new mini-CQE format includes the stride index, byte count and packet checksum. Stride index is needed for striding WQ feature. This patch exposes this capability and enables its setting via mlx5 UHW data as part of query device and cq creation. Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Reviewed-by: Guy Levi <guyle@mellanox.com> Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-29IB/mlx5: Refactor CQE compression responseYonatan Cohen
Refactor CQE compression response to be fully set only when it`s really supported. There is no change from user perspective because anyway resp.cqe_comp_caps.max_num was set to zero. Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>W Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-28Merge branch 'mr_fix' into ↵Jason Gunthorpe
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma for-next Update mlx4 to support user MR creation against read-only memory, previously it required the memory to be writable. Based on rdma for-rc due to dependencies. * mr_fix: (2 commits) IB/mlx4: Mark user MR as writable if actual virtual memory is writable IB/core: Make testing MR flags for writability a static inline function
2018-05-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Lots of easy overlapping changes in the confict resolutions here. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Jason Gunthorpe: "This is pretty much just the usual array of smallish driver bugs. - remove bouncing addresses from the MAINTAINERS file - kernel oops and bad error handling fixes for hfi, i40iw, cxgb4, and hns drivers - various small LOC behavioral/operational bugs in mlx5, hns, qedr and i40iw drivers - two fixes for patches already sent during the merge window - a long-standing bug related to not decreasing the pinned pages count in the right MM was found and fixed" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (28 commits) RDMA/hns: Move the location for initializing tmp_len RDMA/hns: Bugfix for cq record db for kernel IB/uverbs: Fix uverbs_attr_get_obj RDMA/qedr: Fix doorbell bar mapping for dpi > 1 IB/umem: Use the correct mm during ib_umem_release iw_cxgb4: Fix an error handling path in 'c4iw_get_dma_mr()' RDMA/i40iw: Avoid panic when reading back the IRQ affinity hint RDMA/i40iw: Avoid reference leaks when processing the AEQ RDMA/i40iw: Avoid panic when objects are being created and destroyed RDMA/hns: Fix the bug with NULL pointer RDMA/hns: Set NULL for __internal_mr RDMA/hns: Enable inner_pa_vld filed of mpt RDMA/hns: Set desc_dma_addr for zero when free cmq desc RDMA/hns: Fix the bug with rq sge RDMA/hns: Not support qp transition from reset to reset for hip06 RDMA/hns: Add return operation when configured global param fail RDMA/hns: Update convert function of endian format RDMA/hns: Load the RoCE dirver automatically RDMA/hns: Bugfix for rq record db for kernel RDMA/hns: Add rq inline flags judgement ...
2018-05-24Merge tag 'mlx5-updates-2018-05-17' of ↵Jason Gunthorpe
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux into for-next mlx5-updates-2018-05-17 mlx5 core dirver updates for both net-next and rdma-next branches. From Christophe JAILLET, first three patche to use kvfree where needed. From: Or Gerlitz <ogerlitz@mellanox.com> Next six patches from Roi and Co adds support for merged sriov e-switch which comes to serve cases where both PFs, VFs set on them and both uplinks are to be used in single v-switch SW model. When merged e-switch is supported, the per-port e-switch is logically merged into one e-switch that spans both physical ports and all the VFs. This model allows to offload TC eswitch rules between VFs belonging to different PFs (and hence have different eswitch affinity), it also sets the some of the foundations needed for uplink LAG support. * tag 'mlx5-updates-2018-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux: net/mlx5e: Explicitly set source e-switch in offloaded TC rules net/mlx5: Add source e-switch owner net/mlx5e: Explicitly set destination e-switch in FDB rules net/mlx5: Add destination e-switch owner net/mlx5: Properly handle a vport destination when setting FTE net/mlx5: Add merged e-switch cap IB/mlx5: Use 'kvfree()' for memory allocated by 'kvzalloc()' net/mlx5: Eswitch, Use 'kvfree()' for memory allocated by 'kvzalloc()' net/mlx5: Vport, Use 'kvfree()' for memory allocated by 'kvzalloc()'
2018-05-24IB/mlx5: Fetch soft WQE's on fatal error stateErez Shitrit
On fatal error the driver simulates CQE's for ULPs that rely on completion of all their posted work-request. For the GSI traffic, the mlx5 has its own mechanism that sends the completions via software CQE's directly to the relevant CQ. This should be kept in fatal error too, so the driver should simulate such CQE's with the specified error state in order to complete GSI QP work requests. Without the fix the next deadlock might appears: schedule_timeout+0x274/0x350 wait_for_common+0xec/0x240 mcast_remove_one+0xd0/0x120 [ib_core] ib_unregister_device+0x12c/0x230 [ib_core] mlx5_ib_remove+0xc4/0x270 [mlx5_ib] mlx5_detach_device+0x184/0x1a0 [mlx5_core] mlx5_unload_one+0x308/0x340 [mlx5_core] mlx5_pci_err_detected+0x74/0xe0 [mlx5_core] Cc: <stable@vger.kernel.org> # 4.7 Fixes: 89ea94a7b6c4 ("IB/mlx5: Reset flow support for IB kernel ULPs") Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-24RDMA/mlx5: Remove debug prints of VMA pointersLeon Romanovsky
Remove various prints of VMA pointers. Reported-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-18Merge tag 'mlx5-updates-2018-05-17' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Saeed Mahameed says: ==================== mlx5-updates-2018-05-17 mlx5 core dirver updates for both net-next and rdma-next branches. From Christophe JAILLET, first three patche to use kvfree where needed. From: Or Gerlitz <ogerlitz@mellanox.com> Next six patches from Roi and Co adds support for merged sriov e-switch which comes to serve cases where both PFs, VFs set on them and both uplinks are to be used in single v-switch SW model. When merged e-switch is supported, the per-port e-switch is logically merged into one e-switch that spans both physical ports and all the VFs. This model allows to offload TC eswitch rules between VFs belonging to different PFs (and hence have different eswitch affinity), it also sets the some of the foundations needed for uplink LAG support. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16IB/mlx5: Expose MPLS related tunneling offloadsAriel Levkovich
This patch reports the device's capbilities to offload encapsulated MPLS tunnel protocols to user-space: - Capability to offload MPLS over GRE. - Capability to offload MPLS over UDP. Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Ariel Levkovich <lariel@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-16IB/mlx5: Add support for MPLS flow specificationAriel Levkovich
This patch introduces support for the MPLS flow spec and allows the creation of rules that are matching on the MPLS label. Applying the rule matching depends on the flow specs order and the location of the MPLS in the spec list as there are different configurations to be made in the device in the cases of MPLSoGRE and MPLSoUDP vs. non-encapsulated MPLS. Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Ariel Levkovich <lariel@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-16IB/mlx5: Add support for GRE flow specificationAriel Levkovich
This patch introduces support for the GRE flow spec and allowing the creation of rules based on the protocol and key fields that are part of GRE protocol header. Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Ariel Levkovich <lariel@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-16IB/mlx5: Use 'kvfree()' for memory allocated by 'kvzalloc()'Christophe JAILLET
When 'kvzalloc()' is used to allocate memory, 'kvfree()' must be used to free it. Fixes: 1cbe6fc86ccfe ("IB/mlx5: Add support for CQE compressing") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-05-09Merge branch 'k.o/for-rc' into k.o/wip/dl-for-nextDoug Ledford
Several items of conflict have arisen between the RDMA stack's for-rc branch and upcoming for-next work: 9fd4350ba895 ("IB/rxe: avoid double kfree_skb") directly conflicts with 2e47350789eb ("IB/rxe: optimize the function duplicate_request") Patches already submitted by Intel for the hfi1 driver will fail to apply cleanly without this merge Other people on the mailing list have notified that their upcoming patches also fail to apply cleanly without this merge Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-09IB/mlx5: posting klm/mtt list inline in the send queue for reg_wrIdan Burstein
As most kernel RDMA ULPs, (e.g. NVMe over Fabrics in its default "register_always=Y" mode) registers and invalidates user buffer upon each IO. Today the mlx5 driver is posting the registration work request using scatter/gather entry for the MTT/KLM list. The fetch of the MTT/KLM list becomes the bottleneck in number of IO operation could be done by NVMe over Fabrics host driver on a single adapter as shown below. This patch is adding the support for inline registration work request upon MTT/KLM list of size <=64B. The result for NVMe over Fabrics is increase of > x3.5 for small IOs as shown below, I expect other ULPs (e.g iSER, SRP, NFS over RDMA) performance to be enhanced as well. The following results were taken against a single NVMe-oF (RoCE link layer) subsystem with a single namespace backed by null_blk using fio benchmark (with rw=randread, numjobs=48, iodepth={16,64}, ioengine=libaio direct=1): ConnectX-5 (pci Width x16) --------------------------- Block Size s/g reg_wr inline reg_wr ++++++++++ +++++++++++++++ ++++++++++++++++ 512B 1302.8K/34.82% 4951.9K/99.02% 1KB 1284.3K/33.86% 4232.7K/98.09% 2KB 1238.6K/34.1% 2797.5K/80.04% 4KB 1169.3K/32.46% 1941.3K/61.35% 8KB 1013.4K/30.08% 1236.6K/39.47% 16KB 695.7K/20.19% 696.9K/20.59% 32KB 350.3K/9.64% 350.6K/10.3% 64KB 175.86K/5.27% 175.9K/5.28% ConnectX-4 (pci Width x8) --------------------------- Block Size s/g reg_wr inline reg_wr ++++++++++ +++++++++++++++ ++++++++++++++++ 512B 1285.8K/42.66% 4242.7K/98.18% 1KB 1254.1K/41.74% 3569.2K/96.00% 2KB 1185.9K/39.83% 2173.9K/75.58% 4KB 1069.4K/36.46% 1343.3K/47.47% 8KB 755.1K/27.77% 748.7K/29.14% Tested-by: Nitzan Carmi <nitzanc@mellanox.com> Signed-off-by: Idan Burstein <idanb@mellanox.com> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-09RDMA/mlx5: Use proper spec flow label typeDaria Velikovsky
Flow label is defined as u32 in the in ipv6 flow spec, but used internally in the flow specs parsing as u8. That was causing loss of part of flow_label value. Fixes: 2d1e697e9b716 ('IB/mlx5: Add support to match inner packet fields') Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Daria Velikovsky <daria@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-09RDMA/mlx5: Don't assume that medium blueFlame register existsYishai Hadas
User can leave system without medium BlueFlames registers, however the code assumed that at least one such register exists. This patch fixes that assumption. Fixes: c1be5232d21d ("IB/mlx5: Fix micro UAR allocator") Reported-by: Rohit Zambre <rzambre@uci.edu> Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-04Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Doug Ledford: "This is our first pull request of the rc cycle. It's not that it's been overly quiet, we were just waiting on a few things before sending this off. For instance, the 6 patch series from Intel for the hfi1 driver had actually been pulled in on Tuesday for a Wednesday pull request, only to have Jason notice something I missed, so we held off for some testing, and then on Thursday had to respin the series because the very first patch needed a minor fix (unnecessary cast is all). There is a sizable hns patch series in here, as well as a reasonably largish hfi1 patch series, then all of the lines of uapi updates are just the change to the new official Linux-OpenIB SPDX tag (a bunch of our files had what amounts to a BSD-2-Clause + MIT Warranty statement as their license as a result of the initial code submission years ago, and the SPDX folks decided it was unique enough to warrant a unique tag), then the typical mlx4 and mlx5 updates, and finally some cxgb4 and core/cache/cma updates to round out the bunch. None of it was overly large by itself, but in the 2 1/2 weeks we've been collecting patches, it has added up :-/. As best I can tell, it's been through 0day (I got a notice about my last for-next push, but not for my for-rc push, but Jason seems to think that failure messages are prioritized and success messages not so much). It's also been through linux-next. And yes, we did notice in the context portion of the CMA query gid fix patch that there is a dubious BUG_ON() in the code, and have plans to audit our BUG_ON usage and remove it anywhere we can. Summary: - Various build fixes (USER_ACCESS=m and ADDR_TRANS turned off) - SPDX license tag cleanups (new tag Linux-OpenIB) - RoCE GID fixes related to default GIDs - Various fixes to: cxgb4, uverbs, cma, iwpm, rxe, hns (big batch), mlx4, mlx5, and hfi1 (medium batch)" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (52 commits) RDMA/cma: Do not query GID during QP state transition to RTR IB/mlx4: Fix integer overflow when calculating optimal MTT size IB/hfi1: Fix memory leak in exception path in get_irq_affinity() IB/{hfi1, rdmavt}: Fix memory leak in hfi1_alloc_devdata() upon failure IB/hfi1: Fix NULL pointer dereference when invalid num_vls is used IB/hfi1: Fix loss of BECN with AHG IB/hfi1 Use correct type for num_user_context IB/hfi1: Fix handling of FECN marked multicast packet IB/core: Make ib_mad_client_id atomic iw_cxgb4: Atomically flush per QP HW CQEs IB/uverbs: Fix kernel crash during MR deregistration flow IB/uverbs: Prevent reregistration of DM_MR to regular MR RDMA/mlx4: Add missed RSS hash inner header flag RDMA/hns: Fix a couple misspellings RDMA/hns: Submit bad wr RDMA/hns: Update assignment method for owner field of send wqe RDMA/hns: Adjust the order of cleanup hem table RDMA/hns: Only assign dqpn if IB_QP_PATH_DEST_QPN bit is set RDMA/hns: Remove some unnecessary attr_mask judgement RDMA/hns: Only assign mtu if IB_QP_PATH_MTU bit is set ...
2018-04-27RDMA/mlx5: Properly check return value of mlx5_get_uars_pageLeon Romanovsky
Starting from commit 72f36be06138 ("net/mlx5: Fix mlx5_get_uars_page to return error code") the mlx5_get_uars_page() call returns error in case of failure, but it was mistakenly overlooked in the merge commit. Fixes: e7996a9a77fc ("Merge tag v4.15 of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git") Reported-by: Alaa Hleihel <alaa@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27IB/mlx5: Fix represent correct netdevice in dual port RoCEParav Pandit
In commit bcf87f1dbbec ("IB/mlx5: Listen to netdev register/unresiter events in switchdev mode") incorrectly mapped primary device's netdevice to 2nd port netdevice. It always represented primary port's netdevice for 2nd port netdevice when ib representors were not used. This results into failing to process CM request arriving on 2nd port due to incorrect mapping of netdevice. This fix corrects it by considering the right mdev. Cc: <stable@vger.kernel.org> # 4.16 Fixes: bcf87f1dbbec ("IB/mlx5: Listen to netdev register/unresiter events in switchdev mode") Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27IB/mlx5: Use unlimited rate when static rate is not supportedDanit Goldberg
Before the change, if the user passed a static rate value different than zero and the FW doesn't support static rate, it would end up configuring rate of 2.5 GBps. Fix this by using rate 0; unlimited, in cases where FW doesn't support static rate configuration. Cc: <stable@vger.kernel.org> # 3.10 Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Danit Goldberg <danitg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27RDMA/mlx5: Protect from shift operand overflowLeon Romanovsky
Ensure that user didn't supply values too large that can cause overflow. UBSAN: Undefined behaviour in drivers/infiniband/hw/mlx5/qp.c:263:23 shift exponent -2147483648 is negative CPU: 0 PID: 292 Comm: syzkaller612609 Not tainted 4.16.0-rc1+ #131 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0xde/0x164 ubsan_epilogue+0xe/0x81 set_rq_size+0x7c2/0xa90 create_qp_common+0xc18/0x43c0 mlx5_ib_create_qp+0x379/0x1ca0 create_qp.isra.5+0xc94/0x2260 ib_uverbs_create_qp+0x21b/0x2a0 ib_uverbs_write+0xc2c/0x1010 vfs_write+0x1b0/0x550 SyS_write+0xc7/0x1a0 do_syscall_64+0x1aa/0x740 entry_SYSCALL_64_after_hwframe+0x26/0x9b RIP: 0033:0x433569 RSP: 002b:00007ffc6e62f448 EFLAGS: 00000217 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00000000004002f8 RCX: 0000000000433569 RDX: 0000000000000070 RSI: 00000000200042c0 RDI: 0000000000000003 RBP: 00000000006d5018 R08: 00000000004002f8 R09: 00000000004002f8 R10: 00000000004002f8 R11: 0000000000000217 R12: 0000000000000000 R13: 000000000040c9f0 R14: 000000000040ca80 R15: 0000000000000006 Cc: <stable@vger.kernel.org> # 3.10 Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Cc: syzkaller <syzkaller@googlegroups.com> Reported-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27RDMA/mlx5: Fix multiple NULL-ptr deref errors in rereg_mr flowLeon Romanovsky
Failure in rereg MR releases UMEM but leaves the MR to be destroyed by the user. As a result the following scenario may happen: "create MR -> rereg MR with failure -> call to rereg MR again" and hit "NULL-ptr deref or user memory access" errors. Ensure that rereg MR is only performed on a non-dead MR. Cc: syzkaller <syzkaller@googlegroups.com> Cc: <stable@vger.kernel.org> # 4.5 Fixes: 395a8e4c32ea ("IB/mlx5: Refactoring register MR code") Reported-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-26net/mlx5: Fix mlx5_get_vector_affinity functionIsrael Rukshin
Adding the vector offset when calling to mlx5_vector2eqn() is wrong. This is because mlx5_vector2eqn() checks if EQ index is equal to vector number and the fact that the internal completion vectors that mlx5 allocates don't get an EQ index. The second problem here is that using effective_affinity_mask gives the same CPU for different vectors. This leads to unmapped queues when calling it from blk_mq_rdma_map_queues(). This doesn't happen when using affinity_hint mask. Fixes: 2572cf57d75a ("mlx5: fix mlx5_get_vector_affinity to start from completion vector 0") Fixes: 05e0cc84e00c ("net/mlx5: Fix get vector affinity helper function") Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
2018-04-17infiniband: mlx5: fix build errors when INFINIBAND_USER_ACCESS=mRandy Dunlap
Fix build errors when INFINIBAND_USER_ACCESS=m and MLX5_INFINIBAND=y. The build error occurs when the mlx5 driver code attempts to use USER_ACCESS interfaces, which are built as a loadable module. Fixes these build errors: drivers/infiniband/hw/mlx5/main.o: In function `populate_specs_root': ../drivers/infiniband/hw/mlx5/main.c:4982: undefined reference to `uverbs_default_get_objects' ../drivers/infiniband/hw/mlx5/main.c:4994: undefined reference to `uverbs_alloc_spec_tree' drivers/infiniband/hw/mlx5/main.o: In function `depopulate_specs_root': ../drivers/infiniband/hw/mlx5/main.c:5001: undefined reference to `uverbs_free_spec_tree' Build-tested with multiple config combinations. Fixes: 8c84660bb437 ("IB/mlx5: Initialize the parsing tree root without the help of uverbs") Cc: stable@vger.kernel.org # reported against 4.16 Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-04-16IB/mlx5: remove duplicate header fileZhu Yanjun
The header file fs_helpers.h is included twice. So it should be removed. Fixes: 802c2125689d ("IB/mlx5: Add IPsec support for egress and ingress") CC: Srinivas Eeda <srinivas.eeda@oracle.com> CC: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-04-06Merge tag 'for-linus-unmerged' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Pull rdma updates from Jason Gunthorpe: "Doug and I are at a conference next week so if another PR is sent I expect it to only be bug fixes. Parav noted yesterday that there are some fringe case behavior changes in his work that he would like to fix, and I see that Intel has a number of rc looking patches for HFI1 they posted yesterday. Parav is again the biggest contributor by patch count with his ongoing work to enable container support in the RDMA stack, followed by Leon doing syzkaller inspired cleanups, though most of the actual fixing went to RC. There is one uncomfortable series here fixing the user ABI to actually work as intended in 32 bit mode. There are lots of notes in the commit messages, but the basic summary is we don't think there is an actual 32 bit kernel user of drivers/infiniband for several good reasons. However we are seeing people want to use a 32 bit user space with 64 bit kernel, which didn't completely work today. So in fixing it we required a 32 bit rxe user to upgrade their userspace. rxe users are still already quite rare and we think a 32 bit one is non-existing. - Fix RDMA uapi headers to actually compile in userspace and be more complete - Three shared with netdev pull requests from Mellanox: * 7 patches, mostly to net with 1 IB related one at the back). This series addresses an IRQ performance issue (patch 1), cleanups related to the fix for the IRQ performance problem (patches 2-6), and then extends the fragmented completion queue support that already exists in the net side of the driver to the ib side of the driver (patch 7). * Mostly IB, with 5 patches to net that are needed to support the remaining 10 patches to the IB subsystem. This series extends the current 'representor' framework when the mlx5 driver is in switchdev mode from being a netdev only construct to being a netdev/IB dev construct. The IB dev is limited to raw Eth queue pairs only, but by having an IB dev of this type attached to the representor for a switchdev port, it enables DPDK to work on the switchdev device. * All net related, but needed as infrastructure for the rdma driver - Updates for the hns, i40iw, bnxt_re, cxgb3, cxgb4, hns drivers - SRP performance updates - IB uverbs write path cleanup patch series from Leon - Add RDMA_CM support to ib_srpt. This is disabled by default. Users need to set the port for ib_srpt to listen on in configfs in order for it to be enabled (/sys/kernel/config/target/srpt/discovery_auth/rdma_cm_port) - TSO and Scatter FCS support in mlx4 - Refactor of modify_qp routine to resolve problems seen while working on new code that is forthcoming - More refactoring and updates of RDMA CM for containers support from Parav - mlx5 'fine grained packet pacing', 'ipsec offload' and 'device memory' user API features - Infrastructure updates for the new IOCTL interface, based on increased usage - ABI compatibility bug fixes to fully support 32 bit userspace on 64 bit kernel as was originally intended. See the commit messages for extensive details - Syzkaller bugs and code cleanups motivated by them" * tag 'for-linus-unmerged' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (199 commits) IB/rxe: Fix for oops in rxe_register_device on ppc64le arch IB/mlx5: Device memory mr registration support net/mlx5: Mkey creation command adjustments IB/mlx5: Device memory support in mlx5_ib net/mlx5: Query device memory capabilities IB/uverbs: Add device memory registration ioctl support IB/uverbs: Add alloc/free dm uverbs ioctl support IB/uverbs: Add device memory capabilities reporting IB/uverbs: Expose device memory capabilities to user RDMA/qedr: Fix wmb usage in qedr IB/rxe: Removed GID add/del dummy routines RDMA/qedr: Zero stack memory before copying to user space IB/mlx5: Add ability to hash by IPSEC_SPI when creating a TIR IB/mlx5: Add information for querying IPsec capabilities IB/mlx5: Add IPsec support for egress and ingress {net,IB}/mlx5: Add ipsec helper IB/mlx5: Add modify_flow_action_esp verb IB/mlx5: Add implementation for create and destroy action_xfrm IB/uverbs: Introduce ESP steering match filter IB/uverbs: Add modify ESP flow_action ...
2018-04-05IB/mlx5: Device memory mr registration supportAriel Levkovich
Adding mlx5_ib driver implementation for reg_dm_mr callback which allows registering device memory (DM) as an MR for local and remote access. Signed-off-by: Ariel Levkovich <lariel@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
generated by cgit (git 2.34.1) at 2025-04-26 14:11:57 +0000