summaryrefslogtreecommitdiff
path: root/drivers/infiniband/ulp
AgeCommit message (Collapse)Author
2016-03-21IB/ipoib: Allow mcast packets from other VFsEli Cohen
With SRIOV enabled, two VFs on the same HCA which have the same port LID and may have the same QP number. To enable receiving multicasts from such VFs, further qualify the check: ignore the receive only if, in addition, the packet source gid equals the receiving VF's source gid. Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-21IB/ipoib: Add ndo operations for configuring VFsEli Cohen
Add ndo operations to the network driver that enables configuring the following operations: ipoib_set_vf_link_state - configure the VF link policy ipoib_get_vf_config - get link state configuration ipoib_set_vf_guid - set a VF port or node GUID ipoib_get_vf_stats - get statistics of a VF Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-21IB/{core, ulp} Support above 32 possible device capability flagsLeon Romanovsky
The old bitwise device_cap_flags variable was limited to u32 which has all bits already defined. In order to overcome it, we converted device_cap_flags variable to be u64 type. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-21ib_srpt: fix a WARN_ON() messageDan Carpenter
The first argument of WARN_ON() is a condition, so it means the warning message here will just be the name without the ->qp_num information. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-16Merge branches 'mlx4', 'mlx5' and 'ocrdma' into k.o/for-4.6Doug Ledford
2016-03-14Merge branches 'ib_core', 'ib_ipoib', 'srpt', 'drain-cq-v4' and 'net/9p' ↵Doug Ledford
into k.o/for-4.6
2016-03-04iser: Accept arbitrary sg lists mapping if the device supports itSagi Grimberg
If the device support arbitrary sg list mapping (device cap IB_DEVICE_SG_GAPS_REG set) we allocate the memory regions with IB_MR_TYPE_SG_GAPS and allow the block layer to pass us gaps by skip setting the queue virt_boundary. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-03IB/ipoib: Add handling for sending of skb with many fragsHans Westgaard Ry
IPoIB converts skb-fragments to sge adding 1 extra sge when SG is enabled. Current codepath assumes that the max number of sge a device support is at least MAX_SKB_FRAGS+1, there is no interaction with upper layers to limit number of fragments in an skb if a device suports fewer sges. The assumptions also lead to requesting a fixed number of sge when IPoIB creates queue-pairs with SG enabled. A fallback/slowpath is implemented using skb_linearize to handle cases where the conversion would result in more sges than supported. Signed-off-by: Hans Westgaard Ry <hans.westgaard.ry@oracle.com> Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com> Reviewed-by: Wei Lin Guay <wei.lin.guay@oracle.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-02-29IB/srpt: Fix wait list processingBart Van Assche
Since the wait list is not protected against concurrent access it must be processed from the context of the completion handler. Replace the wait list processing code in the IB CM RTU callback handler by code that triggers a completion handler. This patch fixes the following rare crash: WARNING: CPU: 2 PID: 78656 at lib/list_debug.c:53 __list_del_entry+0x67/0xd0() list_del corruption, ffff88041ae404b8->next is LIST_POISON1 (dead000000000100) Call Trace: [<ffffffff81251c6b>] dump_stack+0x4f/0x74 [<ffffffff810574ab>] warn_slowpath_common+0x8b/0xd0 [<ffffffff81057591>] warn_slowpath_fmt+0x41/0x70 [<ffffffff8126f007>] __list_del_entry+0x67/0xd0 [<ffffffff8126f081>] list_del+0x11/0x40 [<ffffffffa0265242>] srpt_cm_handler+0x172/0x1a4 [ib_srpt] [<ffffffffa0370370>] cm_process_work+0x20/0xf0 [ib_cm] [<ffffffffa0370dae>] cm_establish_handler+0xbe/0x110 [ib_cm] [<ffffffffa03733e7>] cm_work_handler+0x67/0xd0 [ib_cm] [<ffffffff8107184d>] process_one_work+0x1bd/0x460 [<ffffffff81073148>] worker_thread+0x118/0x420 [<ffffffff81078444>] kthread+0xe4/0x100 [<ffffffff8151caff>] ret_from_fork+0x3f/0x70 Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Estrin <alex.estrin@intel.com> Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-02-29IB/srpt: Introduce srpt_process_wait_list()Bart Van Assche
This patch does not change any functionality. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Estrin <alex.estrin@intel.com> Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-02-29IB/srpt: Log out all initiators if a port is disabledBart Van Assche
If an initiator observes LUN deletion during shutdown of the target stack then that will trigger an I/O error even when using multipathd. Users need a way to avoid that shutting down the target stack causes I/O errors, e.g. by providing a way to force initiator logout. Hence close all sessions if a target port is disabled. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Estrin <alex.estrin@intel.com> Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-02-29IB/srpt: Fix srpt_write_pending()Bart Van Assche
The only allowed return values for the write_pending() callback function are 0, -EAGAIN and -ENOMEM. Since attempting to perform RDMA over a disconnecting channel will result in an IB error completion anyway, remove the code that checks the channel state from srpt_write_pending(). Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Cc: Alex Estrin <alex.estrin@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-02-29IB/srpt: Detect session shutdown reliablyBart Van Assche
The Last WQE Reached event is only generated after one or more work requests have been queued on the QP associated with a session. Since session shutdown can start before any work requests have been queued, use a zero-length RDMA write to wait until a QP has been drained. Additionally, rework the code for closing and disconnecting a session. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Alex Estrin <alex.estrin@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-02-29IB/srpt: Use a mutex to protect the channel listBart Van Assche
In a later patch a function that can block will be called while iterating over the rch_list. Hence protect that list with a mutex instead of a spinlock. And since it is not allowed to sleep while the task state != TASK_RUNNING, convert the list test in srpt_ch_list_empty() into a lockless test. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Alex Estrin <alex.estrin@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-02-29IB/srpt: Log private data associated with REJBart Van Assche
To make it possible to determine why an initiator sent a REJ, log the private data associated with the received REJ packet. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Alex Estrin <alex.estrin@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-02-29IB/srpt: Eliminate srpt_find_channel()Bart Van Assche
In the CM REQ message handler, store the channel pointer in cm_id->context such that the function srpt_find_channel() is no longer needed. Additionally, make the CM event messages more informative. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Alex Estrin <alex.estrin@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-02-29IB/srpt: Inline trivial CM callback functionsBart Van Assche
Inline those CM callback functions that are only two lines long. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Estrin <alex.estrin@intel.com> Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-02-29IB/srpt: Fix how aborted commands are processedBart Van Assche
srpt_abort_cmd() must not be called in state SRPT_STATE_DATA_IN. Issue a warning if this occurs. srpt_abort_cmd() must not invoke target_put_sess_cmd() for commands in state SRPT_STATE_DONE because the srpt_abort_cmd() callers already do this when necessary. Hence remove this call. If an RDMA read fails the corresponding SCSI command must fail. Hence add a transport_generic_request_failure() call. Remove an incorrect srpt_abort_cmd() call from srpt_rdma_write_done(). Avoid that srpt_send_done() calls srpt_abort_cmd() for finished SCSI commands. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Estrin <alex.estrin@intel.com> Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-02-29IB/srpt: Fix srpt_handle_cmd() error pathsBart Van Assche
The target core function that should be called if target_submit_cmd() fails is target_put_sess_cmd(). Additionally, change the return type of srpt_handle_cmd() from int into void. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Estrin <alex.estrin@intel.com> Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-02-29IB/srpt: Fix srpt_close_session()Bart Van Assche
Avoid that srpt_close_session() waits if it doesn't have to wait. Additionally, increase the time during which srpt_close_session() waits until closing a session has finished. This makes it easier to detect session shutdown bugs. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Cc: Alex Estrin <alex.estrin@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-02-29IB/srpt: Simplify srpt_shutdown_session()Bart Van Assche
The target core guarantees that shutdown_session() is only invoked once per session. This means that the ib_srpt target driver doesn't have to track whether or not shutdown_session() has been called. Additionally, ensure that target_sess_cmd_list_set_waiting() is called before target_wait_for_sess_cmds() by moving it into srpt_release_channel_work(). Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Cc: Alex Estrin <alex.estrin@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-02-29IB/srpt: Simplify channel state managementBart Van Assche
The only allowed channel state changes are those that change the channel state into a state with a higher numerical value. This allows to merge the functions srpt_set_ch_state() and srpt_test_and_set_ch_state() into a single function. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Cc: Alex Estrin <alex.estrin@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-02-29IB/srpt: Use scsilun_to_int()Bart Van Assche
Just like other target drivers, use scsilun_to_int() to unpack SCSI LUN numbers. This patch only changes the behavior of ib_srpt for LUN numbers >= 16384. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Cc: Alex Estrin <alex.estrin@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-02-29IB/srpt: Introduce target_reverse_dma_direction()Bart Van Assche
Use the function target_reverse_dma_direction() instead of reimplementing it. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Cc: Alex Estrin <alex.estrin@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-02-29IB/srpt: Inline srpt_get_ch_state()Bart Van Assche
The callers of srpt_get_ch_state() can access ch->state safely without using locking. Hence inline this function. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Cc: Alex Estrin <alex.estrin@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-02-29IB/srpt: Inline srpt_sdev_name()Bart Van Assche
srpt_sdev_name() is too trivial to keep it as a separate function. Hence inline this function. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Cc: Alex Estrin <alex.estrin@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-02-29IB/srpt: Remove struct srpt_node_aclBart Van Assche
Since struct srpt_node_acl is identical to struct se_node_acl, remove the definition of the former structure. This patch does not change any functionality. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Estrin <alex.estrin@intel.com> Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-02-29IB/srpt: Add parentheses around sizeof argumentBart Van Assche
Although sizeof is an operator and hence in many cases parentheses can be left out, the recommended kernel coding style is to surround the sizeof argument with parentheses. This patch does not change any functionality. It has been generated by running the following shell command: sed -i 's/sizeof \([^ );,]*\)/sizeof(\1)/g' drivers/infiniband/ulp/srpt/*.[ch] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Cc: Alex Estrin <alex.estrin@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-02-29IB/srpt: Simplify srpt_handle_tsk_mgmt()Bart Van Assche
Let the target core check task existence instead of the SRP target driver. Additionally, let the target core check the validity of the task management request instead of the ib_srpt driver. This patch fixes the following kernel crash: BUG: unable to handle kernel NULL pointer dereference at 0000000000000001 IP: [<ffffffffa0565f37>] srpt_handle_new_iu+0x6d7/0x790 [ib_srpt] Oops: 0002 [#1] SMP Call Trace: [<ffffffffa05660ce>] srpt_process_completion+0xde/0x570 [ib_srpt] [<ffffffffa056669f>] srpt_compl_thread+0x13f/0x160 [ib_srpt] [<ffffffff8109726f>] kthread+0xcf/0xe0 [<ffffffff81613cfc>] ret_from_fork+0x7c/0xb0 Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Fixes: 3e4f574857ee ("ib_srpt: Convert TMR path to target_submit_tmr") Tested-by: Alex Estrin <alex.estrin@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-02-29IB/iser: Use ib_drain_sq()Steve Wise
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-02-29IB/srp: Use ib_drain_rq()Steve Wise
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-02-12IB/ipoib: fix for rare multicast join race conditionAlex Estrin
A narrow window for race condition still exist between multicast join thread and *dev_flush workers. A kernel crash caused by prolong erratic link state changes was observed (most likely a faulty cabling): [167275.656270] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 [167275.665973] IP: [<ffffffffa05f8f2e>] ipoib_mcast_join+0xae/0x1d0 [ib_ipoib] [167275.674443] PGD 0 [167275.677373] Oops: 0000 [#1] SMP ... [167275.977530] Call Trace: [167275.982225] [<ffffffffa05f92f0>] ? ipoib_mcast_free+0x200/0x200 [ib_ipoib] [167275.992024] [<ffffffffa05fa1b7>] ipoib_mcast_join_task+0x2a7/0x490 [ib_ipoib] [167276.002149] [<ffffffff8109d5fb>] process_one_work+0x17b/0x470 [167276.010754] [<ffffffff8109e3cb>] worker_thread+0x11b/0x400 [167276.019088] [<ffffffff8109e2b0>] ? rescuer_thread+0x400/0x400 [167276.027737] [<ffffffff810a5aef>] kthread+0xcf/0xe0 Here was a hit spot: ipoib_mcast_join() { .............. rec.qkey = priv->broadcast->mcmember.qkey; ^^^^^^^ ..... } Proposed patch should prevent multicast join task to continue if link state change is detected. Signed-off-by: Alex Estrin <alex.estrin@intel.com> Changes from v4: - as suggested by Doug Ledford, optimized spinlock usage, i.e. ipoib_mcast_join() is called with lock held. Changes from v3: - sync with priv->lock before flag check. Chages from v2: - Move check for OPER_UP flag state to mcast_join() to ensure no event worker is in progress. - minor style fixes. Changes from v1: - No need to lock again if error detected. Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-02-04IB/IPoIB: Do not set skb truesize since using one linearskbCarol L Soto
We are seeing this warning: at net/core/skbuff.c:4174 and before commit a44878d10063 ("IB/ipoib: Use one linear skb in RX flow") skb truesize was not being set when ipoib was using just one skb. Removing this line avoids the warning when running tcp tests like iperf. Fixes: a44878d10063 ("IB/ipoib: Use one linear skb in RX flow") Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-23Merge tag 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma updates from Doug Ledford: "Initial roundup of 4.5 merge window patches - Remove usage of ib_query_device and instead store attributes in ib_device struct - Move iopoll out of block and into lib, rename to irqpoll, and use in several places in the rdma stack as our new completion queue polling library mechanism. Update the other block drivers that already used iopoll to use the new mechanism too. - Replace the per-entry GID table locks with a single GID table lock - IPoIB multicast cleanup - Cleanups to the IB MR facility - Add support for 64bit extended IB counters - Fix for netlink oops while parsing RDMA nl messages - RoCEv2 support for the core IB code - mlx4 RoCEv2 support - mlx5 RoCEv2 support - Cross Channel support for mlx5 - Timestamp support for mlx5 - Atomic support for mlx5 - Raw QP support for mlx5 - MAINTAINERS update for mlx4/mlx5 - Misc ocrdma, qib, nes, usNIC, cxgb3, cxgb4, mlx4, mlx5 updates - Add support for remote invalidate to the iSER driver (pushed through the RDMA tree due to dependencies, acknowledged by nab) - Update to NFSoRDMA (pushed through the RDMA tree due to dependencies, acknowledged by Bruce)" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (169 commits) IB/mlx5: Unify CQ create flags check IB/mlx5: Expose Raw Packet QP to user space consumers {IB, net}/mlx5: Move the modify QP operation table to mlx5_ib IB/mlx5: Support setting Ethernet priority for Raw Packet QPs IB/mlx5: Add Raw Packet QP query functionality IB/mlx5: Add create and destroy functionality for Raw Packet QP IB/mlx5: Refactor mlx5_ib_qp to accommodate other QP types IB/mlx5: Allocate a Transport Domain for each ucontext net/mlx5_core: Warn on unsupported events of QP/RQ/SQ net/mlx5_core: Add RQ and SQ event handling net/mlx5_core: Export transport objects IB/mlx5: Expose CQE version to user-space IB/mlx5: Add CQE version 1 support to user QPs and SRQs IB/mlx5: Fix data validation in mlx5_ib_alloc_ucontext IB/sa: Fix netlink local service GFP crash IB/srpt: Remove redundant wc array IB/qib: Improve ipoib UD performance IB/mlx4: Advertise RoCE v2 support IB/mlx4: Create and use another QP1 for RoCEv2 IB/mlx4: Enable send of RoCE QP1 packets with IP/UDP headers ...
2016-01-20Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "The highlights this round include: - Introduce configfs support for unlocked configfs_depend_item() (krzysztof + andrezej) - Conversion of usb-gadget target driver to new function registration interface (andrzej + sebastian) - Enable qla2xxx FC target mode support for Extended Logins (himansu + giridhar) - Enable qla2xxx FC target mode support for Exchange Offload (himansu + giridhar) - Add qla2xxx FC target mode irq affinity notification + selective command queuing. (quinn + himanshu) - Fix iscsi-target deadlock in se_node_acl configfs deletion (sagi + nab) - Convert se_node_acl configfs deletion + se_node_acl->queue_depth to proper se_session->sess_kref + target_get_session() usage. (hch + sagi + nab) - Fix long-standing race between se_node_acl->acl_kref get and get_initiator_node_acl() lookup. (hch + nab) - Fix target/user block-size handling, and make sure netlink reaches all network namespaces (sheng + andy) Note there is an outstanding bug-fix series for remote I_T nexus port TMR LUN_RESET has been posted and still being tested, and will likely become post -rc1 material at this point" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (56 commits) scsi: qla2xxxx: avoid type mismatch in comparison target/user: Make sure netlink would reach all network namespaces target: Obtain se_node_acl->acl_kref during get_initiator_node_acl target: Convert ACL change queue_depth se_session reference usage iscsi-target: Fix potential dead-lock during node acl delete ib_srpt: Convert acl lookup to modern get_initiator_node_acl usage tcm_fc: Convert acl lookup to modern get_initiator_node_acl usage tcm_fc: Wait for command completion before freeing a session target: Fix a memory leak in target_dev_lba_map_store() target: Support aborting tasks with a 64-bit tag usb/gadget: Remove set-but-not-used variables target: Remove an unused variable target: Fix indentation in target_core_configfs.c target/user: Allow user to set block size before enabling device iser-target: Fix non negative ERR_PTR isert_device_get usage target/fcoe: Add tag support to tcm_fc qla2xxx: Check for online flag instead of active reset when transmitting responses qla2xxx: Set all queues to 4k qla2xxx: Disable ZIO at start time. qla2xxx: Move atioq to a different lock to reduce lock contention ...
2016-01-19IB/srpt: Remove redundant wc arraySagi Grimberg
No usage after the conversion to the new CQ API. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/srpt: Fix the RDMA completion handlersBart Van Assche
Avoid that the following kernel crash is triggered when processing an RDMA completion: BUG: unable to handle kernel paging request at 0000000100000198 IP: [<ffffffff810a4ea2>] __lock_acquire+0xa2/0x560 Call Trace: [<ffffffff810a53c2>] lock_acquire+0x62/0x80 [<ffffffff8151bd33>] _raw_spin_lock_irqsave+0x43/0x60 [<ffffffffa04fd437>] srpt_rdma_read_done+0x57/0x120 [ib_srpt] [<ffffffffa0144dd3>] __ib_process_cq+0x43/0xc0 [ib_core] [<ffffffffa0145115>] ib_cq_poll_work+0x25/0x70 [ib_core] [<ffffffff8107184d>] process_one_work+0x1bd/0x460 [<ffffffff81073148>] worker_thread+0x118/0x420 [<ffffffff81078454>] kthread+0xe4/0x100 [<ffffffff8151cbbf>] ret_from_fork+0x3f/0x70 Fixes: commit 59fae4deaad3 ("IB/srpt: chain RDMA READ/WRITE requests"). Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mad: pass ib_mad_send_buf explicitly to the recv_handlerChristoph Hellwig
Stop abusing wr_id and just pass the parameter explicitly. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hal Rosenstock <hal@mellanox.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/IPoIB: Fix kernel panic on multicast flowErez Shitrit
ipoib_mcast_restart_task calls ipoib_mcast_remove_list with the parameter mcast->dev. That mcast is a temporary (used as an iterator) variable that may be uninitialized. There is no need to send the variable dev to the function, as each mcast has its dev as a member in the mcast struct. This causes the next panic: RIP: 0010: ipoib_mcast_leave+0x6d/0xf0 [ib_ipoib] RSP: 0018: EFLAGS: 00010246 RAX: f0201 RBX: 24e00 RCX: 00000 .... .... Stack: Call Trace: ipoib_mcast_remove_list+0x3a/0x70 [ib_ipoib] ipoib_mcast_restart_task+0x3bb/0x520 [ib_ipoib] process_one_work+0x164/0x470 worker_thread+0x11d/0x420 ... Fixes: 5a0e81f6f483 ('IB/IPoIB: factor out common multicast list removal code') Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Reported-by: Doron Tsur <doront@mellanox.com> Reviewed-by: Christoph Lameter <cl@linux.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-12ib_srpt: Convert acl lookup to modern get_initiator_node_acl usageNicholas Bellinger
This patch does a simple conversion of ib_srpt code to use proper modern core_tpg_get_initiator_node_acl() lookup using se_node_acl->acl_kref, and drops the legacy internal list usage from srpt_lookup_acl(). This involves doing transport_init_session() earlier, and making sure transport_free_session() is called during a se_node_acl lookup failure to drop the last ->acl_kref. Also, it adds a minor backwards-compat hack to avoid the potential for user-space wrt node-acl WWPN formatting by simply stripping off '0x' prefix from ch->sess_name, and retrying once if core_tpg_get_initiator_node_acl() fails. Finally, go ahead and drop port_acl_list port_acl_lock since they are no longer used. Cc: Vu Pham <vu@mellanox.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-07iser-target: Fix non negative ERR_PTR isert_device_get usageNicholas Bellinger
As reported by Dan, isert_create_device_ib_res() failure within isert_device_get() can potentially return a postive value, resulting in ERR_PTR() triggering a NULL pointer dereference. Caught by the static checker: drivers/infiniband/ulp/isert/ib_isert.c:423 isert_device_get() error: passing non negative 1 to ERR_PTR Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-12-26IB/iser: Support the remote invalidation exceptionJenny Derzhavetz
Declare that we support remote invalidation in case we are: 1. using fastreg method 2. always registering memory Detect the invalidated rkey from the work completion info so we won't invalidate it locally. The spec mandates that we must not rely on the target remote invalidate our rkey so we must check it upon a receive (scsi response) completion. Signed-off-by: Jenny Derzhavetz <jennyf@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-24IB/iser: Change the increment rkey flow logicSagi Grimberg
When we enable remote invalidate support we won't want to perform local invalidates at the same time we do today, but we still need to get new rkeys. So, decouple the rkey update from the local invalidate and tie it to memory reg instead. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Jenny Derzhavetz <jennyf@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-24IB/isert: Support the remote invalidation exceptionJenny Derzhavetz
We'll use remote invalidate, according to negotiation result during connection establishment. If the initiator declared that it supports the remote invalidate exception and the local HCA supports IB_DEVICE_MEM_MGT_EXTENSIONS then the target will use IB_WR_SEND_WITH_INV with the correct rkey for the response. Signed-off-by: Jenny Derzhavetz <jennyf@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-24IB/isert: Declare correct flags when accepting a connectionJenny Derzhavetz
iser target does not support zero based virtual addresses and send with invalidate, so it should declare that it doesn't. Signed-off-by: Jenny Derzhavetz <jennyf@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-24IB/isert: Remove unused file iser_proto.hSagi Grimberg
We don't need iser_proto.h anymore, remove it and move (non-protocol) declarations to ib_isert.h Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Jenny Derzhavetz <jennyf@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-24IB/iser,isert: Create and use new shared headerSagi Grimberg
The iser RDMA_CM negotiation protocol is shared by the initiator and the target, so have a shared header for the defines and structure. Move relevant items from the initiator and target headers. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Jenny Derzhavetz <jennyf@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-24IB/iser: set intuitive values for mr_validJenny Derzhavetz
This parameter is described as "is mr valid indicator". In other words, it indicates whether memory registration is valid or not. So intuitive values would be: mr_valid=True, when memory registration is valid and mr_valid=False otherwise. Signed-off-by: Jenny Derzhavetz <jennyf@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-24IB/iser: Don't register memory for all immediate data writesJenny Derzhavetz
When all the task data is sent as immediate data, we are allowed to use the local_dma_lkey as it is not sent to the wire. Signed-off-by: Jenny Derzhavetz <jennyf@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-24IB/iser: Reuse ib_sg_to_pagesSagi Grimberg
We have in iser iser_sg_to_page_vec which has exactly the same role as ib_sg_to_pages. Customize the page_vec to hold a fake MR so we can reuse ib_sg_to_pages. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
generated by cgit (git 2.34.1) at 2025-04-18 03:16:35 +0000