summaryrefslogtreecommitdiff
path: root/drivers/infiniband
AgeCommit message (Collapse)Author
2020-07-30RDMA/core: Free DIM memory in error unwindLeon Romanovsky
The memory allocated for the DIM wasn't freed in in error unwind path, fix it by calling to rdma_dim_destroy(). Fixes: da6629793aa6 ("RDMA/core: Provide RDMA DIM support for ULPs") Link: https://lore.kernel.org/r/20200730082719.1582397-4-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com <mailto:maxg@mellanox.com>> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-30RDMA/core: Stop DIM before destroying CQLeon Romanovsky
HW destroy operation should be last operation after all possible CQ users completed their work, so move DIM work cancellation before such destroy call. Fixes: da6629793aa6 ("RDMA/core: Provide RDMA DIM support for ULPs") Link: https://lore.kernel.org/r/20200730082719.1582397-3-leon@kernel.org Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-30RDMA/mlx5: Initialize QP mutex for the debug kernelsLeon Romanovsky
In DCT and RSS RAW QP creation flows, the QP mutex wasn't initialized and the magic field inside lock was missing. This caused to the following kernel warning for kernels build with CONFIG_DEBUG_MUTEXES. DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 3 PID: 16261 at kernel/locking/mutex.c:938 __mutex_lock+0x60e/0x940 Modules linked in: bonding nf_tables ipip tunnel4 geneve ip6_udp_tunnel udp_tunnel ip6_gre ip6_tunnel tunnel6 ip_gre gre ip_tunnel mlx5_ib mlx5_core mlxfw ptp pps_core rdma_ucm ib_uverbs ib_ipoib ib_umad openvswitch nsh xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat xt_addrtype xt_conntrack nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter overlay ib_srp scsi_transport_srp rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core [last unloaded: mlxfw] CPU: 3 PID: 16261 Comm: ib_send_bw Not tainted 5.8.0-rc4_for_upstream_min_debug_2020_07_08_22_04 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 RIP: 0010:__mutex_lock+0x60e/0x940 Code: c0 0f 84 6d fa ff ff 44 8b 15 4e 9d ba 00 45 85 d2 0f 85 5d fa ff ff 48 c7 c6 f2 de 2b 82 48 c7 c7 f1 8a 2b 82 e8 d2 4d 72 ff <0f> 0b 4c 8b 4d 88 e9 3f fa ff ff f6 c2 04 0f 84 37 fe ff ff 48 89 RSP: 0018:ffff88810bb8b870 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88829f1dd880 RSI: 0000000000000000 RDI: ffffffff81192afa RBP: ffff88810bb8b910 R08: 0000000000000000 R09: 0000000000000028 R10: 0000000000000000 R11: 0000000000003f85 R12: 0000000000000002 R13: ffff88827d8d3ce0 R14: ffffffffa059f615 R15: ffff8882a4d02610 FS: 00007f3f6988e740(0000) GS:ffff8882f5b80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556556158000 CR3: 000000010a63c005 CR4: 0000000000360ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? cmd_exec+0x947/0xe60 [mlx5_core] ? __mutex_lock+0x76/0x940 ? mlx5_ib_qp_set_counter+0x25/0xa0 [mlx5_ib] mlx5_ib_qp_set_counter+0x25/0xa0 [mlx5_ib] mlx5_ib_counter_bind_qp+0x9b/0xe0 [mlx5_ib] __rdma_counter_bind_qp+0x6b/0xa0 [ib_core] rdma_counter_bind_qp_auto+0x363/0x520 [ib_core] _ib_modify_qp+0x316/0x580 [ib_core] ib_modify_qp_with_udata+0x19/0x30 [ib_core] modify_qp+0x4c4/0x600 [ib_uverbs] ib_uverbs_ex_modify_qp+0x87/0xe0 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x129/0x1c0 [ib_uverbs] ib_uverbs_cmd_verbs.isra.5+0x5d5/0x11f0 [ib_uverbs] ? ib_uverbs_handler_UVERBS_METHOD_QUERY_CONTEXT+0x120/0x120 [ib_uverbs] ? lock_acquire+0xb9/0x3a0 ? ib_uverbs_ioctl+0xd0/0x210 [ib_uverbs] ? ib_uverbs_ioctl+0x175/0x210 [ib_uverbs] ib_uverbs_ioctl+0x14b/0x210 [ib_uverbs] ? ib_uverbs_ioctl+0xd0/0x210 [ib_uverbs] ksys_ioctl+0x234/0x7d0 ? exc_page_fault+0x202/0x640 ? do_syscall_64+0x1f/0x2e0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x59/0x2e0 ? asm_exc_page_fault+0x8/0x30 ? rcu_read_lock_sched_held+0x52/0x60 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: b4aaa1f0b415 ("IB/mlx5: Handle type IB_QPT_DRIVER when creating a QP") Link: https://lore.kernel.org/r/20200730082719.1582397-2-leon@kernel.org Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-29IB/rdmavt: Fix RQ counting issues causing use of an invalid RWQEMike Marciniszyn
The lookaside count is improperly initialized to the size of the Receive Queue with the additional +1. In the traces below, the RQ size is 384, so the count was set to 385. The lookaside count is then rarely refreshed. Note the high and incorrect count in the trace below: rvt_get_rwqe: [hfi1_0] wqe ffffc900078e9008 wr_id 55c7206d75a0 qpn c qpt 2 pid 3018 num_sge 1 head 1 tail 0, count 385 rvt_get_rwqe: (hfi1_rc_rcv+0x4eb/0x1480 [hfi1] <- rvt_get_rwqe) ret=0x1 The head,tail indicate there is only one RWQE posted although the count says 385 and we correctly return the element 0. The next call to rvt_get_rwqe with the decremented count: rvt_get_rwqe: [hfi1_0] wqe ffffc900078e9058 wr_id 0 qpn c qpt 2 pid 3018 num_sge 0 head 1 tail 1, count 384 rvt_get_rwqe: (hfi1_rc_rcv+0x4eb/0x1480 [hfi1] <- rvt_get_rwqe) ret=0x1 Note that the RQ is empty (head == tail) yet we return the RWQE at tail 1, which is not valid because of the bogus high count. Best case, the RWQE has never been posted and the rc logic sees an RWQE that is too small (all zeros) and puts the QP into an error state. In the worst case, a server slow at posting receive buffers might fool rvt_get_rwqe() into fetching an old RWQE and corrupt memory. Fix by deleting the faulty initialization code and creating an inline to fetch the posted count and convert all callers to use new inline. Fixes: f592ae3c999f ("IB/rdmavt: Fracture single lock used for posting and processing RWQEs") Link: https://lore.kernel.org/r/20200728183848.22226.29132.stgit@awfm-01.aw.intel.com Reported-by: Zhaojuan Guo <zguo@redhat.com> Cc: <stable@vger.kernel.org> # 5.4.x Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Tested-by: Honggang Li <honli@redhat.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-29RDMA/mlx5: Allow providing extra scatter CQE QP flagLeon Romanovsky
Scatter CQE feature relies on two flags MLX5_QP_FLAG_SCATTER_CQE and MLX5_QP_FLAG_ALLOW_SCATTER_CQE, both of them can be provided without relation to device capability. Relax global validity check to allow MLX5_QP_FLAG_ALLOW_SCATTER_CQE QP flag. Existing user applications are failing on this new validity check. Fixes: 90ecb37a751b ("RDMA/mlx5: Change scatter CQE flag to be set like other vendor flags") Fixes: 37518fa49f76 ("RDMA/mlx5: Process all vendor flags in one place") Link: https://lore.kernel.org/r/20200728120255.805733-1-leon@kernel.org Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-27RDMA/mlx5: Fix prefetch memory leak if get_prefetchable_mr failsJason Gunthorpe
destroy_prefetch_work() must always be called if the work is not going to be queued. The num_sge also should have been set to i, not i-1 which avoids the condition where it shouldn't have been called in the first place. Cc: stable@vger.kernel.org Fixes: fb985e278a30 ("RDMA/mlx5: Use SRCU properly in ODP prefetch") Link: https://lore.kernel.org/r/20200727095712.495652-1-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-27RDMA/cm: Add min length checks to user structure copiesJason Gunthorpe
These are missing throughout ucma, it harmlessly copies garbage from userspace, but in this new code which uses min to compute the copy length it can result in uninitialized stack memory. Check for minimum length at the very start. BUG: KMSAN: uninit-value in ucma_connect+0x2aa/0xab0 drivers/infiniband/core/ucma.c:1091 CPU: 0 PID: 8457 Comm: syz-executor069 Not tainted 5.8.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1df/0x240 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 ucma_connect+0x2aa/0xab0 drivers/infiniband/core/ucma.c:1091 ucma_write+0x5c5/0x630 drivers/infiniband/core/ucma.c:1764 do_loop_readv_writev fs/read_write.c:737 [inline] do_iter_write+0x710/0xdc0 fs/read_write.c:1020 vfs_writev fs/read_write.c:1091 [inline] do_writev+0x42d/0x8f0 fs/read_write.c:1134 __do_sys_writev fs/read_write.c:1207 [inline] __se_sys_writev+0x9b/0xb0 fs/read_write.c:1204 __x64_sys_writev+0x4a/0x70 fs/read_write.c:1204 do_syscall_64+0xb0/0x150 arch/x86/entry/common.c:386 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 34e2ab57a911 ("RDMA/ucma: Extend ucma_connect to receive ECE parameters") Fixes: 0cb15372a615 ("RDMA/cma: Connect ECE to rdma_accept") Link: https://lore.kernel.org/r/0-v1-d5b86dab17dc+28c25-ucma_syz_min_jgg@nvidia.com Reported-by: syzbot+086ab5ca9eafd2379aa6@syzkaller.appspotmail.com Reported-by: syzbot+7446526858b83c8828b2@syzkaller.appspotmail.com Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-21RDMA/mlx5: Prevent prefetch from racing with implicit destructionJason Gunthorpe
Prefetch work in mlx5_ib_prefetch_mr_work can be queued and able to run concurrently with destruction of the implicit MR. The num_deferred_work was intended to serialize this, but there is a race: CPU0 CPU1 mlx5_ib_free_implicit_mr() xa_erase(odp_mkeys) synchronize_srcu() __xa_erase(implicit_children) mlx5_ib_prefetch_mr_work() pagefault_mr() pagefault_implicit_mr() implicit_get_child_mr() xa_cmpxchg() atomic_dec_and_test(num_deferred_mr) wait_event(imr->q_deferred_work) ib_umem_odp_release(odp_imr) kfree(odp_imr) At this point in mlx5_ib_free_implicit_mr() the implicit_children list is supposed to be empty forever so that destroy_unused_implicit_child_mr() and related are not and will not be running. Since it is not empty the destroy_unused_implicit_child_mr() flow ends up touching deallocated memory as mlx5_ib_free_implicit_mr() already tore down the imr parent. The solution is to flush out the prefetch wq by driving num_deferred_work to zero after creation of new prefetch work is blocked. Fixes: 5256edcb98a1 ("RDMA/mlx5: Rework implicit ODP destroy") Link: https://lore.kernel.org/r/20200719065435.130722-1-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-16RDMA/cm: Protect access to remote_sidr_tableMaor Gottlieb
cm.lock must be held while accessing remote_sidr_table. This fixes the below NULL pointer dereference. BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 2 PID: 7288 Comm: udaddy Not tainted 5.7.0_for_upstream_perf_2020_06_09_15_14_20_38 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 RIP: 0010:rb_erase+0x10d/0x360 Code: 00 00 00 48 89 c1 48 89 d0 48 8b 50 08 48 39 ca 74 48 f6 02 01 75 af 48 8b 7a 10 48 89 c1 48 83 c9 01 48 89 78 08 48 89 42 10 <48> 89 0f 48 8b 08 48 89 0a 48 83 e1 fc 48 89 10 0f 84 b1 00 00 00 RSP: 0018:ffffc90000f77c30 EFLAGS: 00010086 RAX: ffff8883df27d458 RBX: ffff8883df27da58 RCX: ffff8883df27d459 RDX: ffff8883d183fa58 RSI: ffffffffa01e8d00 RDI: 0000000000000000 RBP: ffff8883d62ac800 R08: 0000000000000000 R09: 00000000000000ce R10: 000000000000000a R11: 0000000000000000 R12: ffff8883df27da00 R13: ffffc90000f77c98 R14: 0000000000000130 R15: 0000000000000000 FS: 00007f009f877740(0000) GS:ffff8883f1a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000003d467e003 CR4: 0000000000160ee0 Call Trace: cm_send_sidr_rep_locked+0x15a/0x1a0 [ib_cm] ib_send_cm_sidr_rep+0x2b/0x50 [ib_cm] cma_send_sidr_rep+0x8b/0xe0 [rdma_cm] __rdma_accept+0x21d/0x2b0 [rdma_cm] ? ucma_get_ctx+0x2b/0xe0 [rdma_ucm] ? _copy_from_user+0x30/0x60 ucma_accept+0x13e/0x1e0 [rdma_ucm] ucma_write+0xb4/0x130 [rdma_ucm] vfs_write+0xad/0x1a0 ksys_write+0x9d/0xb0 do_syscall_64+0x48/0x130 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f009ef60924 Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 80 00 00 00 00 8b 05 2a ef 2c 00 48 63 ff 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 f3 c3 66 90 55 53 48 89 d5 48 89 f3 48 83 RSP: 002b:00007fff843edf38 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000055743042e1d0 RCX: 00007f009ef60924 RDX: 0000000000000130 RSI: 00007fff843edf40 RDI: 0000000000000003 RBP: 00007fff843ee0e0 R08: 0000000000000000 R09: 0000557430433090 R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fff843edf40 R14: 000000000000038c R15: 00000000ffffff00 CR2: 0000000000000000 Fixes: 6a8824a74bc9 ("RDMA/cm: Allow ib_send_cm_sidr_rep() to be done under lock") Link: https://lore.kernel.org/r/20200716105519.1424266-1-leon@kernel.org Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-16RDMA/core: Fix race in rdma_alloc_commit_uobject()Leon Romanovsky
The FD should not be installed until all of the setup is completed as the fd_install() transfers ownership of the kref to the FD table. A thread can race a close() and trigger concurrent rdma_alloc_commit_uobject() and uverbs_uobject_fd_release() which, at least, triggers a safety WARN_ON: WARNING: CPU: 4 PID: 6913 at drivers/infiniband/core/rdma_core.c:768 uverbs_uobject_fd_release+0x202/0x230 Kernel panic - not syncing: panic_on_warn set ... CPU: 4 PID: 6913 Comm: syz-executor.3 Not tainted 5.7.0-rc2 #22 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [..] RIP: 0010:uverbs_uobject_fd_release+0x202/0x230 Code: fe 4c 89 e7 e8 af 23 fe ff e9 2a ff ff ff e8 c5 fa 61 fe be 03 00 00 00 4c 89 e7 e8 68 eb f5 fe e9 13 ff ff ff e8 ae fa 61 fe <0f> 0b eb ac e8 e5 aa 3c fe e8 50 2b 86 fe e9 6a fe ff ff e8 46 2b RSP: 0018:ffffc90008117d88 EFLAGS: 00010293 RAX: ffff88810e146580 RBX: 1ffff92001022fb1 RCX: ffffffff82d5b902 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffff88811951b040 RBP: ffff88811951b000 R08: ffffed10232a3609 R09: ffffed10232a3609 R10: ffff88811951b043 R11: 0000000000000001 R12: ffff888100a7c600 R13: ffff888100a7c650 R14: ffffc90008117da8 R15: ffffffff82d5b700 ? __uverbs_cleanup_ufile+0x270/0x270 ? uverbs_uobject_fd_release+0x202/0x230 ? uverbs_uobject_fd_release+0x202/0x230 ? __uverbs_cleanup_ufile+0x270/0x270 ? locks_remove_file+0x282/0x3d0 ? security_file_free+0xaa/0xd0 __fput+0x2be/0x770 task_work_run+0x10e/0x1b0 exit_to_usermode_loop+0x145/0x170 do_syscall_64+0x2d0/0x390 ? prepare_exit_to_usermode+0x17a/0x230 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x414da7 Code: 00 00 0f 05 48 3d 00 f0 ff ff 77 3f f3 c3 0f 1f 44 00 00 53 89 fb 48 83 ec 10 e8 f4 fb ff ff 89 df 89 c2 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 2b 89 d7 89 44 24 0c e8 36 fc ff ff 8b 44 24 RSP: 002b:00007fff39d379d0 EFLAGS: 00000293 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000414da7 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000003 RBP: 00007fff39d37a3c R08: 0000000400000000 R09: 0000000400000000 R10: 00007fff39d37910 R11: 0000000000000293 R12: 0000000000000001 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000003 Reorder so that fd_install() is the last thing done in rdma_alloc_commit_uobject(). Fixes: aba94548c9e4 ("IB/uverbs: Move the FD uobj type struct file allocation to alloc_commit") Link: https://lore.kernel.org/r/20200716102059.1420681-1-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-16RDMA/hns: Fix wrong PBL offset when VA is not aligned to PAGE_SIZEXi Wang
ROCE uses "VA % buf_page_size" to caclulate the offset in the PBL's first page, the actual PA corresponding to the MR's VA is equal to MR's PA plus this offset. The first PA in PBL has already been aligned to PAGE_SIZE after calling ib_umem_get(), but the MR's VA may not. If the buf_page_size is smaller than the PAGE_SIZE, this will lead the HW to access the wrong memory because the offset is smaller than expected. Fixes: 9b2cf76c9f05 ("RDMA/hns: Optimize PBL buffer allocation process") Link: https://lore.kernel.org/r/1594726935-45666-1-git-send-email-liweihang@huawei.com Signed-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-16RDMA/hns: Fix wrong assignment of lp_pktn_ini in QPCWeihang Li
The RoCE Engine will schedule to another QP after one has sent (2 ^ lp_pktn_ini) packets. lp_pktn_ini is set in QPC and should be calculated from 2 factors: 1. current MTU as a integer 2. the RoCE Engine's maximum slice length 64KB But the driver use MTU as a enum ib_mtu and the max inline capability, the lp_pktn_ini will be much bigger than expected which may cause traffic of some QPs to never get scheduled. Fixes: b713128de7a1 ("RDMA/hns: Adjust lp_pktn_ini dynamically") Link: https://lore.kernel.org/r/1594726138-49294-1-git-send-email-liweihang@huawei.com Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-16RDMA/mlx5: Use xa_lock_irq when access to SRQ tableMaor Gottlieb
SRQ table is accessed both from interrupt and process context, therefore we must use xa_lock_irq. inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. kworker/u17:9/8573 takes: ffff8883e3503d30 (&xa->xa_lock#13){?...}-{2:2}, at: mlx5_cmd_get_srq+0x18/0x70 [mlx5_ib] {IN-HARDIRQ-W} state was registered at: lock_acquire+0xb9/0x3a0 _raw_spin_lock+0x25/0x30 srq_event_notifier+0x2b/0xc0 [mlx5_ib] notifier_call_chain+0x45/0x70 __atomic_notifier_call_chain+0x69/0x100 forward_event+0x36/0xc0 [mlx5_core] notifier_call_chain+0x45/0x70 __atomic_notifier_call_chain+0x69/0x100 mlx5_eq_async_int+0xc5/0x160 [mlx5_core] notifier_call_chain+0x45/0x70 __atomic_notifier_call_chain+0x69/0x100 mlx5_irq_int_handler+0x19/0x30 [mlx5_core] __handle_irq_event_percpu+0x43/0x2a0 handle_irq_event_percpu+0x30/0x70 handle_irq_event+0x34/0x60 handle_edge_irq+0x7c/0x1b0 do_IRQ+0x60/0x110 ret_from_intr+0x0/0x2a default_idle+0x34/0x160 do_idle+0x1ec/0x220 cpu_startup_entry+0x19/0x20 start_secondary+0x153/0x1a0 secondary_startup_64+0xa4/0xb0 irq event stamp: 20907 hardirqs last enabled at (20907): _raw_spin_unlock_irq+0x24/0x30 hardirqs last disabled at (20906): _raw_spin_lock_irq+0xf/0x40 softirqs last enabled at (20746): __do_softirq+0x2c9/0x436 softirqs last disabled at (20681): irq_exit+0xb3/0xc0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&xa->xa_lock#13); <Interrupt> lock(&xa->xa_lock#13); *** DEADLOCK *** 2 locks held by kworker/u17:9/8573: #0: ffff888295218d38 ((wq_completion)mlx5_ib_page_fault){+.+.}-{0:0}, at: process_one_work+0x1f1/0x5f0 #1: ffff888401647e78 ((work_completion)(&pfault->work)){+.+.}-{0:0}, at: process_one_work+0x1f1/0x5f0 stack backtrace: CPU: 0 PID: 8573 Comm: kworker/u17:9 Tainted: GO 5.7.0_for_upstream_min_debug_2020_06_14_11_31_46_41 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5_ib_page_fault mlx5_ib_eqe_pf_action [mlx5_ib] Call Trace: dump_stack+0x71/0x9b mark_lock+0x4f2/0x590 ? print_shortest_lock_dependencies+0x200/0x200 __lock_acquire+0xa00/0x1eb0 lock_acquire+0xb9/0x3a0 ? mlx5_cmd_get_srq+0x18/0x70 [mlx5_ib] _raw_spin_lock+0x25/0x30 ? mlx5_cmd_get_srq+0x18/0x70 [mlx5_ib] mlx5_cmd_get_srq+0x18/0x70 [mlx5_ib] mlx5_ib_eqe_pf_action+0x257/0xa30 [mlx5_ib] ? process_one_work+0x209/0x5f0 process_one_work+0x27b/0x5f0 ? __schedule+0x280/0x7e0 worker_thread+0x2d/0x3c0 ? process_one_work+0x5f0/0x5f0 kthread+0x111/0x130 ? kthread_park+0x90/0x90 ret_from_fork+0x24/0x30 Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Link: https://lore.kernel.org/r/20200712102641.15210-1-leon@kernel.org Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-08RDMA/mlx5: Set PD pointers for the error flow unwindLeon Romanovsky
ib_pd is accessed internally during destroy of the TIR/TIS, but PD can be not set yet. This leading to the following kernel panic. BUG: kernel NULL pointer dereference, address: 0000000000000074 PGD 8000000079eaa067 P4D 8000000079eaa067 PUD 7ae81067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 1 PID: 709 Comm: syz-executor.0 Not tainted 5.8.0-rc3 #41 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 RIP: 0010:destroy_raw_packet_qp_tis drivers/infiniband/hw/mlx5/qp.c:1189 [inline] RIP: 0010:destroy_raw_packet_qp drivers/infiniband/hw/mlx5/qp.c:1527 [inline] RIP: 0010:destroy_qp_common+0x2ca/0x4f0 drivers/infiniband/hw/mlx5/qp.c:2397 Code: 00 85 c0 74 2e e8 56 18 55 ff 48 8d b3 28 01 00 00 48 89 ef e8 d7 d3 ff ff 48 8b 43 08 8b b3 c0 01 00 00 48 8b bd a8 0a 00 00 <0f> b7 50 74 e8 0d 6a fe ff e8 28 18 55 ff 49 8d 55 50 4c 89 f1 48 RSP: 0018:ffffc900007bbac8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff88807949e800 RCX: 0000000000000998 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88807c180140 RBP: ffff88807b50c000 R08: 000000000002d379 R09: ffffc900007bba00 R10: 0000000000000001 R11: 000000000002d358 R12: ffff888076f37000 R13: ffff88807949e9c8 R14: ffffc900007bbe08 R15: ffff888076f37000 FS: 00000000019bf940(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000074 CR3: 0000000076d68004 CR4: 0000000000360ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: mlx5_ib_create_qp+0xf36/0xf90 drivers/infiniband/hw/mlx5/qp.c:3014 _ib_create_qp drivers/infiniband/core/core_priv.h:333 [inline] create_qp+0x57f/0xd20 drivers/infiniband/core/uverbs_cmd.c:1443 ib_uverbs_create_qp+0xcf/0x100 drivers/infiniband/core/uverbs_cmd.c:1564 ib_uverbs_write+0x5fa/0x780 drivers/infiniband/core/uverbs_main.c:664 __vfs_write+0x3f/0x90 fs/read_write.c:495 vfs_write+0xc7/0x1f0 fs/read_write.c:559 ksys_write+0x5e/0x110 fs/read_write.c:612 do_syscall_64+0x3e/0x70 arch/x86/entry/common.c:359 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x466479 Code: Bad RIP value. RSP: 002b:00007ffd057b62b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000466479 RDX: 0000000000000070 RSI: 0000000020000240 RDI: 0000000000000003 RBP: 00000000019bf8fc R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 0000000000000bf6 R14: 00000000004cb859 R15: 00000000006fefc0 Fixes: 6c41965d647a ("RDMA/mlx5: Don't access ib_qp fields in internal destroy QP path") Link: https://lore.kernel.org/r/20200707110612.882962-4-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-08IB/mlx5: Fix 50G per lane indicationAya Levin
Some released FW versions mistakenly don't set the capability that 50G per lane link-modes are supported for VFs (ptys_extended_ethernet capability bit). Use PTYS.ext_eth_proto_capability instead, as this indication is always accurate. If PTYS.ext_eth_proto_capability is valid (has a non-zero value) conclude that the HCA supports 50G per lane. Otherwise, conclude that the HCA doesn't support 50G per lane. Fixes: 08e8676f1607 ("IB/mlx5: Add support for 50Gbps per lane link modes") Link: https://lore.kernel.org/r/20200707110612.882962-3-leon@kernel.org Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-08RDMA/siw: Fix reporting vendor_part_idKamal Heib
Move the initialization of the vendor_part_id to be before calling ib_register_device(), this is needed because the query_device() callback is called from the context of ib_register_device() before initializing the vendor_part_id, so the reported value is wrong. Fixes: bdcf26bf9b3a ("rdma/siw: network and RDMA core interface") Link: https://lore.kernel.org/r/20200707130931.444724-1-kamalheib1@gmail.com Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-02IB/sa: Resolv use-after-free in ib_nl_make_request()Divya Indi
There is a race condition where ib_nl_make_request() inserts the request data into the linked list but the timer in ib_nl_request_timeout() can see it and destroy it before ib_nl_send_msg() is done touching it. This could happen, for instance, if there is a long delay allocating memory during nlmsg_new() This causes a use-after-free in the send_mad() thread: [<ffffffffa02f43cb>] ? ib_pack+0x17b/0x240 [ib_core] [ <ffffffffa032aef1>] ib_sa_path_rec_get+0x181/0x200 [ib_sa] [<ffffffffa0379db0>] rdma_resolve_route+0x3c0/0x8d0 [rdma_cm] [<ffffffffa0374450>] ? cma_bind_port+0xa0/0xa0 [rdma_cm] [<ffffffffa040f850>] ? rds_rdma_cm_event_handler_cmn+0x850/0x850 [rds_rdma] [<ffffffffa040f22c>] rds_rdma_cm_event_handler_cmn+0x22c/0x850 [rds_rdma] [<ffffffffa040f860>] rds_rdma_cm_event_handler+0x10/0x20 [rds_rdma] [<ffffffffa037778e>] addr_handler+0x9e/0x140 [rdma_cm] [<ffffffffa026cdb4>] process_req+0x134/0x190 [ib_addr] [<ffffffff810a02f9>] process_one_work+0x169/0x4a0 [<ffffffff810a0b2b>] worker_thread+0x5b/0x560 [<ffffffff810a0ad0>] ? flush_delayed_work+0x50/0x50 [<ffffffff810a68fb>] kthread+0xcb/0xf0 [<ffffffff816ec49a>] ? __schedule+0x24a/0x810 [<ffffffff816ec49a>] ? __schedule+0x24a/0x810 [<ffffffff810a6830>] ? kthread_create_on_node+0x180/0x180 [<ffffffff816f25a7>] ret_from_fork+0x47/0x90 [<ffffffff810a6830>] ? kthread_create_on_node+0x180/0x180 The ownership rule is once the request is on the list, ownership transfers to the list and the local thread can't touch it any more, just like for the normal MAD case in send_mad(). Thus, instead of adding before send and then trying to delete after on errors, move the entire thing under the spinlock so that the send and update of the lists are atomic to the conurrent threads. Lightly reoganize things so spinlock safe memory allocations are done in the final NL send path and the rest of the setup work is done before and outside the lock. Fixes: 3ebd2fd0d011 ("IB/sa: Put netlink request into the request list before sending") Link: https://lore.kernel.org/r/1592964789-14533-1-git-send-email-divya.indi@oracle.com Signed-off-by: Divya Indi <divya.indi@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-02IB/hfi1: Do not destroy link_wq when the device is shut downKaike Wan
The workqueue link_wq should only be destroyed when the hfi1 driver is unloaded, not when the device is shut down. Fixes: 71d47008ca1b ("IB/hfi1: Create workqueue for link events") Link: https://lore.kernel.org/r/20200623204053.107638.70315.stgit@awfm-01.aw.intel.com Cc: <stable@vger.kernel.org> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-02IB/hfi1: Do not destroy hfi1_wq when the device is shut downKaike Wan
The workqueue hfi1_wq is destroyed in function shutdown_device(), which is called by either shutdown_one() or remove_one(). The function shutdown_one() is called when the kernel is rebooted while remove_one() is called when the hfi1 driver is unloaded. When the kernel is rebooted, hfi1_wq is destroyed while all qps are still active, leading to a kernel crash: BUG: unable to handle kernel NULL pointer dereference at 0000000000000102 IP: [<ffffffff94cb7b02>] __queue_work+0x32/0x3e0 PGD 0 Oops: 0000 [#1] SMP Modules linked in: dm_round_robin nvme_rdma(OE) nvme_fabrics(OE) nvme_core(OE) ib_isert iscsi_target_mod target_core_mod ib_ucm mlx4_ib iTCO_wdt iTCO_vendor_support mxm_wmi sb_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm rpcrdma sunrpc irqbypass crc32_pclmul ghash_clmulni_intel rdma_ucm aesni_intel ib_uverbs lrw gf128mul opa_vnic glue_helper ablk_helper ib_iser cryptd ib_umad rdma_cm iw_cm ses enclosure libiscsi scsi_transport_sas pcspkr joydev ib_ipoib(OE) scsi_transport_iscsi ib_cm sg ipmi_ssif mei_me lpc_ich i2c_i801 mei ioatdma ipmi_si dm_multipath ipmi_devintf ipmi_msghandler wmi acpi_pad acpi_power_meter hangcheck_timer ip_tables ext4 mbcache jbd2 mlx4_en sd_mod crc_t10dif crct10dif_generic mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm hfi1(OE) crct10dif_pclmul crct10dif_common crc32c_intel drm ahci mlx4_core libahci rdmavt(OE) igb megaraid_sas ib_core libata drm_panel_orientation_quirks ptp pps_core devlink dca i2c_algo_bit dm_mirror dm_region_hash dm_log dm_mod CPU: 19 PID: 0 Comm: swapper/19 Kdump: loaded Tainted: G OE ------------ 3.10.0-957.el7.x86_64 #1 Hardware name: Phegda X2226A/S2600CW, BIOS SE5C610.86B.01.01.0024.021320181901 02/13/2018 task: ffff8a799ba0d140 ti: ffff8a799bad8000 task.ti: ffff8a799bad8000 RIP: 0010:[<ffffffff94cb7b02>] [<ffffffff94cb7b02>] __queue_work+0x32/0x3e0 RSP: 0018:ffff8a90dde43d80 EFLAGS: 00010046 RAX: 0000000000000082 RBX: 0000000000000086 RCX: 0000000000000000 RDX: ffff8a90b924fcb8 RSI: 0000000000000000 RDI: 000000000000001b RBP: ffff8a90dde43db8 R08: ffff8a799ba0d6d8 R09: ffff8a90dde53900 R10: 0000000000000002 R11: ffff8a90dde43de8 R12: ffff8a90b924fcb8 R13: 000000000000001b R14: 0000000000000000 R15: ffff8a90d2890000 FS: 0000000000000000(0000) GS:ffff8a90dde40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000102 CR3: 0000001a70410000 CR4: 00000000001607e0 Call Trace: [<ffffffff94cb8105>] queue_work_on+0x45/0x50 [<ffffffffc03f781e>] _hfi1_schedule_send+0x6e/0xc0 [hfi1] [<ffffffffc03f78a2>] hfi1_schedule_send+0x32/0x70 [hfi1] [<ffffffffc02cf2d9>] rvt_rc_timeout+0xe9/0x130 [rdmavt] [<ffffffff94ce563a>] ? trigger_load_balance+0x6a/0x280 [<ffffffffc02cf1f0>] ? rvt_free_qpn+0x40/0x40 [rdmavt] [<ffffffff94ca7f58>] call_timer_fn+0x38/0x110 [<ffffffffc02cf1f0>] ? rvt_free_qpn+0x40/0x40 [rdmavt] [<ffffffff94caa3bd>] run_timer_softirq+0x24d/0x300 [<ffffffff94ca0f05>] __do_softirq+0xf5/0x280 [<ffffffff9537832c>] call_softirq+0x1c/0x30 [<ffffffff94c2e675>] do_softirq+0x65/0xa0 [<ffffffff94ca1285>] irq_exit+0x105/0x110 [<ffffffff953796c8>] smp_apic_timer_interrupt+0x48/0x60 [<ffffffff95375df2>] apic_timer_interrupt+0x162/0x170 <EOI> [<ffffffff951adfb7>] ? cpuidle_enter_state+0x57/0xd0 [<ffffffff951ae10e>] cpuidle_idle_call+0xde/0x230 [<ffffffff94c366de>] arch_cpu_idle+0xe/0xc0 [<ffffffff94cfc3ba>] cpu_startup_entry+0x14a/0x1e0 [<ffffffff94c57db7>] start_secondary+0x1f7/0x270 [<ffffffff94c000d5>] start_cpu+0x5/0x14 The solution is to destroy the workqueue only when the hfi1 driver is unloaded, not when the device is shut down. In addition, when the device is shut down, no more work should be scheduled on the workqueues and the workqueues are flushed. Fixes: 8d3e71136a08 ("IB/{hfi1, qib}: Add handling of kernel restart") Link: https://lore.kernel.org/r/20200623204047.107638.77646.stgit@awfm-01.aw.intel.com Cc: <stable@vger.kernel.org> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-02RDMA/mlx5: Fix legacy IPoIB QP initializationLeon Romanovsky
Legacy IPoIB sets IB_QP_CREATE_NETIF_QP QP create flag and because mlx5 doesn't use this flag, the process_create_flags() failed to create IPoIB QPs. Fixes: 2978975ce7f1 ("RDMA/mlx5: Process create QP flags in one place") Link: https://lore.kernel.org/r/20200630122147.445847-1-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-02IB/hfi1: Add explicit cast OPA_MTU_8192 to 'enum ib_mtu'Nathan Chancellor
Clang warns: drivers/infiniband/hw/hfi1/qp.c:198:9: warning: implicit conversion from enumeration type 'enum opa_mtu' to different enumeration type 'enum ib_mtu' [-Wenum-conversion] mtu = OPA_MTU_8192; ~ ^~~~~~~~~~~~ enum opa_mtu extends enum ib_mtu. There are typically two ways to deal with this: * Remove the expected types and just use 'int' for all parameters and types. * Explicitly cast the enums between each other. This driver chooses to do the later so do the same thing here. Fixes: 6d72344cf6c4 ("IB/ipoib: Increase ipoib Datagram mode MTU's upper limit") Link: https://lore.kernel.org/r/20200623005224.492239-1-natechancellor@gmail.com Link: https://github.com/ClangBuiltLinux/linux/issues/1062 Link: https://lore.kernel.org/linux-rdma/20200527040350.GA3118979@ubuntu-s3-xlarge-x86/ Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-06-24IB/hfi1: Add atomic triggered sleep/wakeupMike Marciniszyn
When running iperf in a two host configuration the following trace can occur: [ 319.728730] NETDEV WATCHDOG: ib0 (hfi1): transmit queue 0 timed out The issue happens because the current implementation relies on the netif txq being stopped to control the flushing of the tx list. There are two resources that the transmit logic can wait on and stop the txq: - SDMA descriptors - Ring space to hold completions The ring space is tested on the sending side and relieved when the ring is consumed in the napi tx reaping. Unfortunately, that reaping can run conncurrently with the workqueue flushing of the txlist. If the txq is started just before the workitem executes, the txlist will never be flushed, leading to the txq being stuck. Fix by: - Adding sleep/wakeup wrappers * Use an atomic to control the call to the netif routines inside the wrappers - Use another atomic to record ring space exhaustion * Only wakeup when the a ring space exhaustion has happened and it relieved Add additional wrappers to clarify the ring space resource handling. Fixes: d99dc602e2a5 ("IB/hfi1: Add functions to transmit datagram ipoib packets") Link: https://lore.kernel.org/r/20200623204327.108092.4024.stgit@awfm-01.aw.intel.com Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-06-24IB/hfi1: Correct -EBUSY handling in tx codeMike Marciniszyn
The current code mishandles -EBUSY in two ways: - The flow change doesn't test the return from the flush and runs on to process the current packet racing with the wakeup processing - The -EBUSY handling for a single packet inserts the tx into the txlist after the submit call, racing with the same wakeup processing Fix the first by dropping the skb and returning NETDEV_TX_OK. Fix the second by insuring the the list entry within the txreq is inited when allocated. This enables the sleep routine to detect that the txreq has used the non-list api and queue the packet to the txlist. Both flaws can lead to having the flushing thread executing in causing two threads to manipulate the txlist. Fixes: d99dc602e2a5 ("IB/hfi1: Add functions to transmit datagram ipoib packets") Link: https://lore.kernel.org/r/20200623204321.108092.83898.stgit@awfm-01.aw.intel.com Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-06-24IB/hfi1: Fix module use count flaw due to leftover module put callsDennis Dalessandro
When the try_module_get calls were removed from opening and closing of the i2c debugfs file, the corresponding module_put calls were missed. This results in an inaccurate module use count that requires a power cycle to fix. Fixes: 09fbca8e6240 ("IB/hfi1: No need to use try_module_get for debugfs") Link: https://lore.kernel.org/r/20200623203230.106975.76240.stgit@awfm-01.aw.intel.com Cc: <stable@vger.kernel.org> Reviewed-by: Kaike Wan <kaike.wan@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-06-24IB/hfi1: Restore kfree in dummy_netdev cleanupDennis Dalessandro
We need to do some rework on the dummy netdev. Calling the free_netdev() would normally make sense, and that will be addressed in an upcoming patch. For now just revert the behavior to what it was before keeping the unused variable removal part of the patch. The dd->dumm_netdev is mainly used for packet receiving through alloc_netdev_mqs() for typical net devices. A a result, it should be freed with kfree instead of free_netdev() that leads to a crash when unloading the hfi1 module: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 8000000855b54067 P4D 8000000855b54067 PUD 84a4f5067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 73 PID: 10299 Comm: modprobe Not tainted 5.6.0-rc5+ #1 Hardware name: Intel Corporation S2600WT2R/S2600WT2R, BIOS SE5C610.86B.01.01.0016.033120161139 03/31/2016 RIP: 0010:__hw_addr_flush+0x12/0x80 Code: 40 00 48 83 c4 08 4c 89 e7 5b 5d 41 5c e9 76 77 18 00 66 0f 1f 44 00 00 0f 1f 44 00 00 41 54 49 89 fc 55 53 48 8b 1f 48 39 df <48> 8b 2b 75 08 eb 4a 48 89 eb 48 89 c5 48 89 df e8 99 bf d0 ff 84 RSP: 0018:ffffb40e08783db8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000002 RDX: ffffb40e00000000 RSI: 0000000000000246 RDI: ffff88ab13662298 RBP: ffff88ab13662000 R08: 0000000000001549 R09: 0000000000001549 R10: 0000000000000001 R11: 0000000000aaaaaa R12: ffff88ab13662298 R13: ffff88ab1b259e20 R14: ffff88ab1b259e42 R15: 0000000000000000 FS: 00007fb39b534740(0000) GS:ffff88b31f940000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000084d3ea004 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: dev_addr_flush+0x15/0x30 free_netdev+0x7e/0x130 hfi1_netdev_free+0x59/0x70 [hfi1] remove_one+0x65/0x110 [hfi1] pci_device_remove+0x3b/0xc0 device_release_driver_internal+0xec/0x1b0 driver_detach+0x46/0x90 bus_remove_driver+0x58/0xd0 pci_unregister_driver+0x26/0xa0 hfi1_mod_cleanup+0xc/0xd54 [hfi1] __x64_sys_delete_module+0x16c/0x260 ? exit_to_usermode_loop+0xa4/0xc0 do_syscall_64+0x5b/0x200 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 193ba03141bb ("IB/hfi1: Use free_netdev() in hfi1_netdev_free()") Link: https://lore.kernel.org/r/20200623203224.106975.16926.stgit@awfm-01.aw.intel.com Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-06-22IB/mad: Fix use after free when destroying MAD agentShay Drory
Currently, when RMPP MADs are processed while the MAD agent is destroyed, it could result in use after free of rmpp_recv, as decribed below: cpu-0 cpu-1 ----- ----- ib_mad_recv_done() ib_mad_complete_recv() ib_process_rmpp_recv_wc() unregister_mad_agent() ib_cancel_rmpp_recvs() cancel_delayed_work() process_rmpp_data() start_rmpp() queue_delayed_work(rmpp_recv->cleanup_work) destroy_rmpp_recv() free_rmpp_recv() cleanup_work()[1] spin_lock_irqsave(&rmpp_recv->agent->lock) <-- use after free [1] cleanup_work() == recv_cleanup_handler Fix it by waiting for the MAD agent reference count becoming zero before calling to ib_cancel_rmpp_recvs(). Fixes: 9a41e38a467c ("IB/mad: Use IDR for agent IDs") Link: https://lore.kernel.org/r/20200621104738.54850-2-leon@kernel.org Signed-off-by: Shay Drory <shayd@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-06-22RDMA/mlx5: Protect from kernel crash if XRC_TGT doesn't have udataLeon Romanovsky
Don't deref udata if it is NULL BUG: kernel NULL pointer dereference, address: 0000000000000030 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 SMP PTI CPU: 2 PID: 1592 Comm: python3 Not tainted 5.7.0-rc6+ #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 RIP: 0010:create_qp+0x39e/0xae0 [mlx5_ib] Code: c0 0d 00 00 bf 10 01 00 00 e8 be a9 e4 e0 48 85 c0 49 89 c2 0f 84 0c 07 00 00 41 8b 85 74 63 01 00 0f c8 a9 00 00 00 10 74 0a <41> 8b 46 30 0f c8 41 89 42 14 41 8b 52 18 41 0f b6 4a 1c 0f ca 89 RSP: 0018:ffffc9000067f8b0 EFLAGS: 00010206 RAX: 0000000010170000 RBX: ffff888441313000 RCX: 0000000000000000 RDX: 0000000000000200 RSI: 0000000000000000 RDI: ffff88845b1d4400 RBP: ffffc9000067fa60 R08: 0000000000000200 R09: ffff88845b1d4200 R10: ffff88845b1d4200 R11: ffff888441313000 R12: ffffc9000067f950 R13: ffff88846ac00140 R14: 0000000000000000 R15: ffff88846c2bc000 FS: 00007faa1a3c0540(0000) GS:ffff88846fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000030 CR3: 0000000446dca003 CR4: 0000000000760ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 mlx5_ib_create_qp+0x897/0xfa0 [mlx5_ib] ib_create_qp+0x9e/0x300 [ib_core] create_qp+0x92d/0xb20 [ib_uverbs] ? ib_uverbs_cq_event_handler+0x30/0x30 [ib_uverbs] ? release_resource+0x30/0x30 ib_uverbs_create_qp+0xc4/0xe0 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xc8/0xf0 [ib_uverbs] ib_uverbs_run_method+0x223/0x770 [ib_uverbs] ? track_pfn_remap+0xa7/0x100 ? uverbs_disassociate_api+0xd0/0xd0 [ib_uverbs] ? remap_pfn_range+0x358/0x490 ib_uverbs_cmd_verbs.isra.6+0x19b/0x370 [ib_uverbs] ? rdma_umap_priv_init+0x82/0xe0 [ib_core] ? vm_mmap_pgoff+0xec/0x120 ib_uverbs_ioctl+0xc0/0x120 [ib_uverbs] ksys_ioctl+0x92/0xb0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x48/0x130 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: e383085c2425 ("RDMA/mlx5: Set ECE options during QP create") Link: https://lore.kernel.org/r/20200621115959.60126-1-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-22RDMA/counter: Query a counter before releaseMark Zhang
Query a dynamically-allocated counter before release it, to update it's hwcounters and log all of them into history data. Otherwise all values of these hwcounters will be lost. Fixes: f34a55e497e8 ("RDMA/core: Get sum value of all counters when perform a sysfs stat read") Link: https://lore.kernel.org/r/20200621110000.56059-1-leon@kernel.org Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-19RDMA/mad: Fix possible memory leak in ib_mad_post_receive_mads()Fan Guo
If ib_dma_mapping_error() returns non-zero value, ib_mad_post_receive_mads() will jump out of loops and return -ENOMEM without freeing mad_priv. Fix this memory-leak problem by freeing mad_priv in this case. Fixes: 2c34e68f4261 ("IB/mad: Check and handle potential DMA mapping errors") Link: https://lore.kernel.org/r/20200612063824.180611-1-guofan5@huawei.com Signed-off-by: Fan Guo <guofan5@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-18RDMA/mlx5: Fix integrity enabled QP creationMax Gurtovoy
create_flags checks was refactored and broke the creation on integrity enabled QPs and actually broke the NVMe/RDMA and iSER ULP's when using mlx5 driven devices. Fixes: 2978975ce7f1 ("RDMA/mlx5: Process create QP flags in one place") Link: https://lore.kernel.org/r/20200617130230.2846915-1-leon@kernel.org Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-18RDMA/mlx5: Remove ECE limitation from the RAW_PACKET QPsLeon Romanovsky
Like any other QP type, rely on FW for the RAW_PACKET QPs to decide if ECE is supported or not. This fixes an inability to create RAW_PACKET QPs with latest rdma-core with the ECE support. Fixes: e383085c2425 ("RDMA/mlx5: Set ECE options during QP create") Link: https://lore.kernel.org/r/20200618112507.3453496-2-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-18RDMA/mlx5: Fix remote gid value in query QPMaor Gottlieb
Remote gid is not copied to the right address. Fix it by using rdma_ah_set_dgid_raw to copy the remote gid value from the QP context on query QP. Fixes: 70bd7fb87625 ("RDMA/mlx5: Remove manually crafted QP context the query call") Link: https://lore.kernel.org/r/20200618112507.3453496-3-leon@kernel.org Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-18RDMA/mlx5: Don't access ib_qp fields in internal destroy QP pathLeon Romanovsky
destroy_qp_common is called for flows where QP is already created by HW. While it is called from IB/core, the ibqp.* fields will be fully initialized, but it is not the case if this function is called during QP creation. Don't rely on ibqp fields as much as possible and initialize send_cq/recv_cq as temporal solution till all drivers will be converted to IB/core QP allocation scheme. refcount_t: underflow; use-after-free. WARNING: CPU: 1 PID: 5372 at lib/refcount.c:28 refcount_warn_saturate+0xfe/0x1a0 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 5372 Comm: syz-executor.2 Not tainted 5.5.0-rc5 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Call Trace: mlx5_core_put_rsc+0x70/0x80 destroy_resource_common+0x8e/0xb0 mlx5_core_destroy_qp+0xaf/0x1d0 mlx5_ib_destroy_qp+0xeb0/0x1460 ib_destroy_qp_user+0x2d5/0x7d0 create_qp+0xed3/0x2130 ib_uverbs_create_qp+0x13e/0x190 ? ib_uverbs_ex_create_qp ib_uverbs_write+0xaa5/0xdf0 __vfs_write+0x7c/0x100 ksys_write+0xc8/0x200 do_syscall_64+0x9c/0x390 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 08d53976609a ("RDMA/mlx5: Copy response to the user in one place") Link: https://lore.kernel.org/r/20200617130148.2846643-1-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-18RDMA/core: Check that type_attrs is not NULL prior accessLeon Romanovsky
In disassociate flow, the type_attrs is set to be NULL, which is in an implicit way is checked in alloc_uobj() by "if (!attrs->context)". Change the logic to rely on that check, to be consistent with other alloc_uobj() places that will fix the following kernel splat. BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 3 PID: 2743 Comm: python3 Not tainted 5.7.0-rc6-for-upstream-perf-2020-05-23_19-04-38-5 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 RIP: 0010:alloc_begin_fd_uobject+0x18/0xf0 [ib_uverbs] Code: 89 43 48 eb 97 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 55 49 89 f5 41 54 55 48 89 fd 53 48 83 ec 08 48 8b 1f <48> 8b 43 18 48 8b 80 80 00 00 00 48 3d 20 10 33 a0 74 1c 48 3d 30 RSP: 0018:ffffc90001127b70 EFLAGS: 00010282 RAX: ffffffffa0339fe0 RBX: 0000000000000000 RCX: 8000000000000007 RDX: fffffffffffffffb RSI: ffffc90001127d28 RDI: ffff88843fe1f600 RBP: ffff88843fe1f600 R08: ffff888461eb06d8 R09: ffff888461eb06f8 R10: ffff888461eb0700 R11: 0000000000000000 R12: ffff88846a5f6450 R13: ffffc90001127d28 R14: ffff88845d7d6ea0 R15: ffffc90001127cb8 FS: 00007f469bff1540(0000) GS:ffff88846f980000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000018 CR3: 0000000450018003 CR4: 0000000000760ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ? xa_store+0x28/0x40 rdma_alloc_begin_uobject+0x4f/0x90 [ib_uverbs] ib_uverbs_create_comp_channel+0x87/0xf0 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xb1/0xf0 [ib_uverbs] ib_uverbs_cmd_verbs.isra.8+0x96d/0xae0 [ib_uverbs] ? get_page_from_freelist+0x3bb/0xf70 ? _copy_to_user+0x22/0x30 ? uverbs_disassociate_api+0xd0/0xd0 [ib_uverbs] ? __wake_up_common_lock+0x87/0xc0 ib_uverbs_ioctl+0xbc/0x130 [ib_uverbs] ksys_ioctl+0x83/0xc0 ? ksys_write+0x55/0xd0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x48/0x130 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f469ac43267 Fixes: 849e149063bd ("RDMA/core: Do not allow alloc_commit to fail") Link: https://lore.kernel.org/r/20200617061826.2625359-1-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-18RDMA/hns: Fix an cmd queue issue when resettingYangyang Li
If a IMP reset caused by some hardware errors and hns RoCE driver reset occurred at the same time, there is a possiblity that the IMP will stop dealing with command and users can't use the hardware. The logs are as follows: hns3 0000:fd:00.1: cleaned 0, need to clean 1 hns3 0000:fd:00.1: firmware version query failed -11 hns3 0000:fd:00.1: Cmd queue init failed hns3 0000:fd:00.1: Upgrade reset level hns3 0000:fd:00.1: global reset interrupt The hns NIC driver divides the reset process into 3 status: initialization, hardware resetting and softwaring restting. RoCE driver gets reset status by interfaces provided by NIC driver and commands will not be sent to the IMP if the driver is in any above status. The main reason for this issue is that there is a time gap between status 1 and 2, if the RoCE driver sends commands to the IMP during this gap, the IMP will stop working because it is not ready. To eliminate the time gap, the hns NIC driver has added a new interface in commit a4de02287abb9 ("net: hns3: provide .get_cmdq_stat interface for the client"), so RoCE driver can ensure that no commands will be sent during resetting. Link: https://lore.kernel.org/r/1592314778-52822-1-git-send-email-liweihang@huawei.com Signed-off-by: Yangyang Li <liyangyang20@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-18RDMA/hns: Fix a calltrace when registering MR from userspaceYangyang Li
ibmr.device is assigned after MR is successfully registered, but both write_mtpt() and frmr_write_mtpt() accesses it during the mr registration process, which may cause the following error when trying to register MR in userspace and pbl_hop_num is set to 0. pc : hns_roce_mtr_find+0xa0/0x200 [hns_roce] lr : set_mtpt_pbl+0x54/0x118 [hns_roce_hw_v2] sp : ffff00023e73ba20 x29: ffff00023e73ba20 x28: ffff00023e73bad8 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000002 x24: 0000000000000000 x23: ffff00023e73bad0 x22: 0000000000000000 x21: ffff0000094d9000 x20: 0000000000000000 x19: ffff8020a6bdb2c0 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0140000000000000 x12: 0040000000000041 x11: ffff000240000000 x10: 0000000000001000 x9 : 0000000000000000 x8 : ffff802fb7558480 x7 : ffff802fb7558480 x6 : 000000000003483d x5 : ffff00023e73bad0 x4 : 0000000000000002 x3 : ffff00023e73bad8 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000094d9708 Call trace: hns_roce_mtr_find+0xa0/0x200 [hns_roce] set_mtpt_pbl+0x54/0x118 [hns_roce_hw_v2] hns_roce_v2_write_mtpt+0x14c/0x168 [hns_roce_hw_v2] hns_roce_mr_enable+0x6c/0x148 [hns_roce] hns_roce_reg_user_mr+0xd8/0x130 [hns_roce] ib_uverbs_reg_mr+0x14c/0x2e0 [ib_uverbs] ib_uverbs_write+0x27c/0x3e8 [ib_uverbs] __vfs_write+0x60/0x190 vfs_write+0xac/0x1c0 ksys_write+0x6c/0xd8 __arm64_sys_write+0x24/0x30 el0_svc_common+0x78/0x130 el0_svc_handler+0x38/0x78 el0_svc+0x8/0xc Solve above issue by adding a pointer of structure hns_roce_dev as a parameter of write_mtpt() and frmr_write_mtpt(), so that both of these functions can access it before finishing MR's registration. Fixes: 9b2cf76c9f05 ("RDMA/hns: Optimize PBL buffer allocation process") Link: https://lore.kernel.org/r/1592314629-51715-1-git-send-email-liweihang@huawei.com Signed-off-by: Yangyang Li <liyangyang20@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-18RDMA/mlx5: Add missed RST2INIT and INIT2INIT steps during ECE handshakeLeon Romanovsky
Missed steps during ECE handshake left userspace application with less options for the ECE handshake. Pass ECE options in the additional transitions. Fixes: 50aec2c3135e ("RDMA/mlx5: Return ECE data after modify QP") Link: https://lore.kernel.org/r/20200616104536.2426384-1-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-18RDMA/cma: Protect bind_list and listen_list while finding matching cm idMark Zhang
The bind_list and listen_list must be accessed under a lock, add the missing locking around the access in cm_ib_id_from_event() In addition add lockdep asserts to make it clearer what the locking semantic is here. general protection fault: 0000 [#1] SMP NOPTI CPU: 226 PID: 126135 Comm: kworker/226:1 Tainted: G OE 4.12.14-150.47-default #1 SLE15 Hardware name: Cray Inc. Windom/Windom, BIOS 0.8.7 01-10-2020 Workqueue: ib_cm cm_work_handler [ib_cm] task: ffff9c5a60a1d2c0 task.stack: ffffc1d91f554000 RIP: 0010:cma_ib_req_handler+0x3f1/0x11b0 [rdma_cm] RSP: 0018:ffffc1d91f557b40 EFLAGS: 00010286 RAX: deacffffffffff30 RBX: 0000000000000001 RCX: ffff9c2af5bb6000 RDX: 00000000000000a9 RSI: ffff9c5aa4ed2f10 RDI: ffffc1d91f557b08 RBP: ffffc1d91f557d90 R08: ffff9c340cc80000 R09: ffff9c2c0f901900 R10: 0000000000000000 R11: 0000000000000001 R12: deacffffffffff30 R13: ffff9c5a48aeec00 R14: ffffc1d91f557c30 R15: ffff9c5c2eea3688 FS: 0000000000000000(0000) GS:ffff9c5c2fa80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00002b5cc03fa320 CR3: 0000003f8500a000 CR4: 00000000003406e0 Call Trace: ? rdma_addr_cancel+0xa0/0xa0 [ib_core] ? cm_process_work+0x28/0x140 [ib_cm] cm_process_work+0x28/0x140 [ib_cm] ? cm_get_bth_pkey.isra.44+0x34/0xa0 [ib_cm] cm_work_handler+0xa06/0x1a6f [ib_cm] ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __switch_to+0x7c/0x4b0 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 process_one_work+0x1da/0x400 worker_thread+0x2b/0x3f0 ? process_one_work+0x400/0x400 kthread+0x118/0x140 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x22/0x40 Code: 00 66 83 f8 02 0f 84 ca 05 00 00 49 8b 84 24 d0 01 00 00 48 85 c0 0f 84 68 07 00 00 48 2d d0 01 00 00 49 89 c4 0f 84 59 07 00 00 <41> 0f b7 44 24 20 49 8b 77 50 66 83 f8 0a 75 9e 49 8b 7c 24 28 Fixes: 4c21b5bcef73 ("IB/cma: Add net_dev and private data checks to RDMA CM") Link: https://lore.kernel.org/r/20200616104304.2426081-1-leon@kernel.org Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-18RDMA/qedr: Fix KASAN: use-after-free in ucma_event_handler+0x532Michal Kalderon
Private data passed to iwarp_cm_handler is copied for connection request / response, but ignored otherwise. If junk is passed, it is stored in the event and used later in the event processing. The driver passes an old junk pointer during connection close which leads to a use-after-free on event processing. Set private data to NULL for events that don 't have private data. BUG: KASAN: use-after-free in ucma_event_handler+0x532/0x560 [rdma_ucm] kernel: Read of size 4 at addr ffff8886caa71200 by task kworker/u128:1/5250 kernel: kernel: Workqueue: iw_cm_wq cm_work_handler [iw_cm] kernel: Call Trace: kernel: dump_stack+0x8c/0xc0 kernel: print_address_description.constprop.0+0x1b/0x210 kernel: ? ucma_event_handler+0x532/0x560 [rdma_ucm] kernel: ? ucma_event_handler+0x532/0x560 [rdma_ucm] kernel: __kasan_report.cold+0x1a/0x33 kernel: ? ucma_event_handler+0x532/0x560 [rdma_ucm] kernel: kasan_report+0xe/0x20 kernel: check_memory_region+0x130/0x1a0 kernel: memcpy+0x20/0x50 kernel: ucma_event_handler+0x532/0x560 [rdma_ucm] kernel: ? __rpc_execute+0x608/0x620 [sunrpc] kernel: cma_iw_handler+0x212/0x330 [rdma_cm] kernel: ? iw_conn_req_handler+0x6e0/0x6e0 [rdma_cm] kernel: ? enqueue_timer+0x86/0x140 kernel: ? _raw_write_lock_irq+0xd0/0xd0 kernel: cm_work_handler+0xd3d/0x1070 [iw_cm] Fixes: e411e0587e0d ("RDMA/qedr: Add iWARP connection management functions") Link: https://lore.kernel.org/r/20200616093408.17827-1-michal.kalderon@marvell.com Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-18RDMA/efa: Set maximum pkeys device attributeGal Pressman
The max_pkeys device attribute was not set in query device verb, set it to one in order to account for the default pkey (0xffff). This information is exposed to userspace and can cause malfunction Fixes: 40909f664d27 ("RDMA/efa: Add EFA verbs implementation") Link: https://lore.kernel.org/r/20200614103534.88060-1-galpress@amazon.com Reviewed-by: Firas JahJah <firasj@amazon.com> Reviewed-by: Yossi Leybovich <sleybo@amazon.com> Signed-off-by: Gal Pressman <galpress@amazon.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-18RDMA/rvt: Fix potential memory leak caused by rvt_alloc_rqAditya Pakki
In case of failure of alloc_ud_wq_attr(), the memory allocated by rvt_alloc_rq() is not freed. Fix it by calling rvt_free_rq() using the existing clean-up code. Fixes: d310c4bf8aea ("IB/{rdmavt, hfi1, qib}: Remove AH refcount for UD QPs") Link: https://lore.kernel.org/r/20200614041148.131983-1-pakki001@umn.edu Signed-off-by: Aditya Pakki <pakki001@umn.edu> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-18RDMA/core: Annotate CMA unlock helper routineLeon Romanovsky
Fix the following sparse error by adding annotation to cm_queue_work_unlock() that it releases cm_id_priv->lock lock. drivers/infiniband/core/cm.c:936:24: warning: context imbalance in 'cm_queue_work_unlock' - unexpected unlock Fixes: e83f195aa45c ("RDMA/cm: Pull duplicated code into cm_queue_work_unlock()") Link: https://lore.kernel.org/r/20200611130045.1994026-1-leon@kernel.org Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-15RDMA/siw: Fix pointer-to-int-cast warning in siw_rx_pbl()Tom Seewald
The variable buf_addr is type dma_addr_t, which may not be the same size as a pointer. To ensure it is the correct size, cast to a uintptr_t. Fixes: c536277e0db1 ("RDMA/siw: Fix 64/32bit pointer inconsistency") Link: https://lore.kernel.org/r/20200610174717.15932-1-tseewald@gmail.com Signed-off-by: Tom Seewald <tseewald@gmail.com> Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-15RDMA/hfi1: Fix trivial mis-spelling of 'descriptor'Kieran Bingham
The word 'descriptor' is misspelled throughout the tree. Fix it up accordingly: decriptors -> descriptors Link: https://lore.kernel.org/r/20200609124610.3445662-3-kieran.bingham+renesas@ideasonboard.com Link: https://lore.kernel.org/r/20200609124610.3445662-12-kieran.bingham+renesas@ideasonboard.com Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-15RDMA/mlx5: Fix -Wformat warning in check_ucmd_data()Tom Seewald
Variables of type size_t should use %zu rather than %lu [1]. The variables "inlen", "ucmd", "last", and "size" are all size_t, so use the correct format specifiers. [1] https://www.kernel.org/doc/html/latest/core-api/printk-formats.html Fixes: e383085c2425 ("RDMA/mlx5: Set ECE options during QP create") Link: https://lore.kernel.org/r/20200605023012.9527-1-tseewald@gmail.com Signed-off-by: Tom Seewald <tseewald@gmail.com> Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-15RDMA/mlx5: Remove duplicated assignment to resp.response_lengthColin Ian King
The assignment to resp.response_length is never read since it is being updated again on the next statement. The assignment is redundant so removed it. Fixes: a645a89d9a78 ("RDMA/mlx5: Return ECE DC support") Link: https://lore.kernel.org/r/20200604143902.56021-1-colin.king@canonical.com Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-09mmap locking API: convert mmap_sem commentsMichel Lespinasse
Convert comments that reference mmap_sem to reference mmap_lock instead. [akpm@linux-foundation.org: fix up linux-next leftovers] [akpm@linux-foundation.org: s/lockaphore/lock/, per Vlastimil] [akpm@linux-foundation.org: more linux-next fixups, per Michel] Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-13-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09mmap locking API: use coccinelle to convert mmap_sem rwsem call sitesMichel Lespinasse
This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09mm: reorder includes after introduction of linux/pgtable.hMike Rapoport
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include of the latter in the middle of asm includes. Fix this up with the aid of the below script and manual adjustments here and there. import sys import re if len(sys.argv) is not 3: print "USAGE: %s <file> <header>" % (sys.argv[0]) sys.exit(1) hdr_to_move="#include <linux/%s>" % sys.argv[2] moved = False in_hdrs = False with open(sys.argv[1], "r") as f: lines = f.readlines() for _line in lines: line = _line.rstrip(' ') if line == hdr_to_move: continue if line.startswith("#include <linux/"): in_hdrs = True elif not moved and in_hdrs: moved = True print hdr_to_move print line Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit (git 2.34.1) at 2024-05-23 14:17:30 +0000