summaryrefslogtreecommitdiff
path: root/drivers/infiniband
AgeCommit message (Collapse)Author
2017-11-13bnxt_re: fix a crash in qp error event processingSriharsha Basavapatna
In bnxt_qplib_process_qp_event(), for qp error events we look up the qp-handle and pass it for further processing. But we don't check if the handle is NULL. This could lead to a crash in the called functions when that qp-handle is dereferenced, if the qp is destroyed in the meantime. Fix this by checking for a valid qp-handle in that function. Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-13IB/core: Avoid unnecessary return value checkParav Pandit
Since there is nothing done with non zero return value, such check is avoided. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-13IB/mlx4: Increase maximal message size under UD QPMark Bloch
Maximal message should be used as a limit to the max message payload allowed, without the headers. The ConnectX-3 check is done against this value includes the headers. When the payload is 4K this will cause the NIC to drop packets. Increase maximal message to 8K as workaround, this shouldn't change current behaviour because we continue to set the MTU to 4k. To reproduce; set MTU to 4296 on the corresponding interface, for example: ifconfig eth0 mtu 4296 (both server and client) On server: ib_send_bw -c UD -d mlx4_0 -s 4096 -n 1000000 -i1 -m 4096 On client: ib_send_bw -d mlx4_0 -c UD <server_ip> -s 4096 -n 1000000 -i 1 -m 4096 Fixes: 6e0d733d9215 ("IB/mlx4: Allow 4K messages for UD QPs") Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-13IB/mlx4: Add contig support for control objectsGuy Levi
Taking advantage of the optimization which was introduced in previous commit ("IB/mlx4: Use optimal numbers of MTT entries") to optimize the MTT usage for QP and CQ. Signed-off-by: Guy Levi <guyle@mellanox.com> Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-13IB/mlx4: Use optimal numbers of MTT entriesGuy Levi
Optimize the device performance by assigning multiple physical pages, which are contiguous, to a single MTT. As a result, the number of MTTs is reduced and in turn save cache misses of MTTs. Signed-off-by: Guy Levi <guyle@mellanox.com> Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-13IB/mlx5: Fix RoCE Address Path fieldsMajd Dibbiny
When working over a RoCE network, the UDP source port should be set only for statically connected QPs (RC, UC and XRC). Fixes: 2811ba51b049 ("IB/mlx5: Add RoCE fields to Address Vector") Signed-off-by: Majd Dibbiny <majd@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-13IB/mlx5: Assign send CQ and recv CQ of UMR QPMajd Dibbiny
The UMR's QP is created by calling mlx5_ib_create_qp directly, and therefore the send CQ and the recv CQ on the ibqp weren't assigned. Assign them right after calling the mlx5_ib_create_qp to assure that any access to those pointers will work as expected and won't crash the system as might happen as part of reset flow. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Majd Dibbiny <majd@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-13RDMA/cxgb4: Protect from possible dereferenceLeon Romanovsky
Smatch tool reports the following error: drivers/infiniband/hw/cxgb4/qp.c:1886 c4iw_create_qp() error: we previously assumed 'ucontext' could be null (see line 1804) Cc: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-13RDMA/bnxt_re: Remove unused vlan_tag variableLeon Romanovsky
The Broadcom driver produces the following compilation warning drivers/infiniband/hw/bnxt_re/ib_verbs.c: In function ‘bnxt_re_create_ah’: drivers/infiniband/hw/bnxt_re/ib_verbs.c:668:6: warning: variable ‘vlan_tag’ set but not used [-Wunused-but-set-variable] u16 vlan_tag; Let's remove it till vlan_tag will be implemented properly. Cc: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-10IB/mlx5: Add PCI write end padding supportNoa Osherovich
Add the PCI write end padding flag to device_cap_flags enum and set it during mlx5_ib_query_device so it will be reported to user-space. During WQ/QP creation, set that capability for WQ/QP if user requested it and HW supports it. PCI write end padding modification is not supported for now. There's no such flag for a QP but for a WQ, create and modify use the same flag. Return an error if PCI write end padding flag is set during modify_wq. Signed-off-by: Noa Osherovich <noaos@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-10IB/core: Add PCI write end padding flags for WQ and QPNoa Osherovich
There are root complexes that are able to optimize their performance when incoming data is multiple full cache lines. PCI write end padding is the device's ability to pad the ending of incoming packets (scatter) to full cache line such that the last upstream write generated by an incoming packet will be a full cache line. Add a relevant entry to ib_device_cap_flags to report such capability of an RDMA device. Add the QP and WQ create flags: * A QP/WQ created with a scatter end padding flag will cause HW to pad the last upstream write generated by a packet to cache line. User should consider several factors before activating this feature: - In case of high CPU memory load (which may cause PCI back pressure in turn), if a large percent of the writes are partial cache line, this feature should be checked as an optional solution. - This feature might reduce performance if most packets are between one and two cache lines and PCIe throughput has reached its maximum capacity. E.g. 65B packet from the network port will lead to 128B write on PCIe, which may cause traffic on PCIe to reach high throughput. Signed-off-by: Noa Osherovich <noaos@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-10IB/rxe: don't crash, if allocation of crc algorithm failedThomas Bogendoerfer
Following crash happens, if crc algorithm couldn't be allocated: [ 1087.989072] rdma_rxe: loaded [ 1097.855397] PCLMULQDQ-NI instructions are not detected. [ 1097.901220] rdma_rxe: failed to allocate crc algorithmi err:-2 [ 1097.901248] BUG: unable to handle kernel [ 1097.901249] NULL pointer dereference [ 1097.901250] at 0000000000000046 [...] Reason is that rxe->tfm is assigned the error return, which will then be used for crypto_free_shash() in rxe_cleanup. Fix by using a temporary variable and assigning it rxe->tfm after allocation succeeded. Fixes: cee2688e3cd6 ("IB/rxe: Offload CRC calculation when possible") Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-10IB/core: Avoid crash on pkey enforcement failed in received MADsParav Pandit
Below kernel crash is observed when Pkey security enforcement fails on received MADs. This issue is reported in [1]. ib_free_recv_mad() accesses the rmpp_list, whose initialization is needed before accessing it. When security enformcent fails on received MADs, MAD processing avoided due to security checks failed. OpenSM[3770]: SM port is down kernel: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 kernel: IP: ib_free_recv_mad+0x44/0xa0 [ib_core] kernel: PGD 0 kernel: P4D 0 kernel: kernel: Oops: 0002 [#1] SMP kernel: CPU: 0 PID: 2833 Comm: kworker/0:1H Tainted: P IO 4.13.4-1-pve #1 kernel: Hardware name: Dell XS23-TY3 /9CMP63, BIOS 1.71 09/17/2013 kernel: Workqueue: ib-comp-wq ib_cq_poll_work [ib_core] kernel: task: ffffa069c6541600 task.stack: ffffb9a729054000 kernel: RIP: 0010:ib_free_recv_mad+0x44/0xa0 [ib_core] kernel: RSP: 0018:ffffb9a729057d38 EFLAGS: 00010286 kernel: RAX: ffffa069cb138a48 RBX: ffffa069cb138a10 RCX: 0000000000000000 kernel: RDX: ffffb9a729057d38 RSI: 0000000000000000 RDI: ffffa069cb138a20 kernel: RBP: ffffb9a729057d60 R08: ffffa072d2d49800 R09: ffffa069cb138ae0 kernel: R10: ffffa069cb138ae0 R11: ffffa072b3994e00 R12: ffffb9a729057d38 kernel: R13: ffffa069d1c90000 R14: 0000000000000000 R15: ffffa069d1c90880 kernel: FS: 0000000000000000(0000) GS:ffffa069dba00000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 0000000000000008 CR3: 00000011f51f2000 CR4: 00000000000006f0 kernel: Call Trace: kernel: ib_mad_recv_done+0x5cc/0xb50 [ib_core] kernel: __ib_process_cq+0x5c/0xb0 [ib_core] kernel: ib_cq_poll_work+0x20/0x60 [ib_core] kernel: process_one_work+0x1e9/0x410 kernel: worker_thread+0x4b/0x410 kernel: kthread+0x109/0x140 kernel: ? process_one_work+0x410/0x410 kernel: ? kthread_create_on_node+0x70/0x70 kernel: ? SyS_exit_group+0x14/0x20 kernel: ret_from_fork+0x25/0x30 kernel: RIP: ib_free_recv_mad+0x44/0xa0 [ib_core] RSP: ffffb9a729057d38 kernel: CR2: 0000000000000008 [1] : https://www.spinics.net/lists/linux-rdma/msg56190.html Fixes: 47a2b338fe63 ("IB/core: Enforce security on management datagrams") Cc: stable@vger.kernel.org # 4.13+ Signed-off-by: Parav Pandit <parav@mellanox.com> Reported-by: Chris Blake <chrisrblake93@gmail.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Reviewed-by: Hal Rosenstock <hal@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-10RDMA/cxgb4: Annotate r2 and stag as __be32Leon Romanovsky
Chelsio cxgb4 HW is big-endian, hence there is need to properly annotate r2 and stag fields as __be32 and not __u32 to fix the following sparse warnings. drivers/infiniband/hw/cxgb4/qp.c:614:16: warning: incorrect type in assignment (different base types) expected unsigned int [unsigned] [usertype] r2 got restricted __be32 [usertype] <noident> drivers/infiniband/hw/cxgb4/qp.c:615:18: warning: incorrect type in assignment (different base types) expected unsigned int [unsigned] [usertype] stag got restricted __be32 [usertype] <noident> Cc: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-10IB/mlx4: Fix RSS's QPC attributes assignmentsGuy Levi
In the modify QP handler the base_qpn_udp field in the RSS QPC is overwrite later by irrelevant value assignment. Hence, ingress packets which gets to the RSS QP will be steered then to a garbage QPN. The patch fixes this by skipping the above assignment when a RSS QP is modified, also, the RSS context's attributes assignments are relocated just before the context is posted to avoid future issues like this. Additionally, this patch takes the opportunity to change the code to be disciplined to the device's manual and assigns the RSS QP context just at RESET to INIT transition. Fixes:3078f5f1bd8b ("IB/mlx4: Add support for RSS QP") Signed-off-by: Guy Levi <guyle@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-10IB/mlx4: Add report for RSS capabilities by vendor channelGuy Levi
The mlx4's RSS patches submission missed a report of RSS capabilities which should be reported by the vendor channel in query_device. Signed-off-by: Guy Levi <guyle@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-10RDMA/umem: Avoid partial declaration of non-static functionLeon Romanovsky
The RDMA/umem uses generic RB-trees macros to generate various ib_umem access functions. The generation is performed with INTERVAL_TREE_DEFINE macro, which allows one of two modes: declare all functions as static or declare none of the function to be static. The second mode of operation produces the following sparse errors: drivers/infiniband/core/umem_rbtree.c:69:1: warning: symbol 'rbt_ib_umem_iter_first' was not declared. Should it be static? drivers/infiniband/core/umem_rbtree.c:69:1: warning: symbol 'rbt_ib_umem_iter_next' was not declared. Should it be static? Code relocation together with declaration of such functions to be "static" solves the issue. Because there is no need to have separate file for two functions, let's consolidate umem_rtree.c and umem_odp.c into one file. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-10RDMA/hns: Modify the usage of cmd_sn in hip08oulijun
The cmd_sn field of CQ doorbell inits for 0. It should be increment on each first db rung after a completion Event. if the cmd_sn of notify doorbell Adjacent two times is the same, the hardware will distinguish it for the same notify request and update its type according to the priority level of next event and solicited event. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-10RDMA/hns: Unify the calculation for hem index in hip08oulijun
The calculation of hem index are different between hns_roce_table_get and hns_roce_table_find. When the table chunk size of TRRL is not divisible by object size, it will faile to find the trrl table. This patch is to update the calculation of the hem index in the hns_roce_table_find to the same as which in the hns_roce_table_get. Signed-off-by: Shaobo Xu <xushaobo2@huawei.com> Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-10RDMA/hns: Set the owner field of SQWQE in hip08 RoCEoulijun
the owner need to be set when posting sqwqe in hip08 RoCE. The owner be used according to the below algorithm: The value of owner should be 1 in the first lap, it should be 0 in the second lap and in turn. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Shaobo Xu <xushaobo2@huawei.com> Signed-off-by: Yixian Liu <liuyixian@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-10RDMA/hns: Add sq_invld_flg field in QP contextoulijun
In hip08 RoCE, it need to add the sq_invld_flg field in QP context for RoCE hardware. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Shaobo Xu <xushaobo2@huawei.com> Signed-off-by: Yixian Liu <liuyixian@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-10RDMA/hns: Update the usage of ack timeout in hip08oulijun
The ack timeout's value in qp context shall be a 5-bit value and be assgined by users. When at of qpc is set zero, the timer is disabled. When attr_mask set for IB_QP_TIMEOUT, The ack timeout field is effective. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Shaobo Xu <xushaobo2@huawei.com> Signed-off-by: Yixian Liu <liuyixian@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-10RDMA/hns: Set sq_cur_sge_blk_addr field in QPC in hip08oulijun
If the extend sges exist, the sq_cur_sge_blk_addr field in QPC (qp context) should be configured. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Shaobo Xu <xushaobo2@huawei.com> Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Yixian Liu <liuyixian@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-10RDMA/hns: Enable the cqe field of sqwqe of RCoulijun
When sig_type of qpc is non-selectable, all sq's wqes will produce cqe and not depend on the cqe attribute of wqe. When sig_type of qpc is selectable, The cqe attribute of wqe will decide whether to produce the cqe. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Shaobo Xu <xushaobo2@huawei.com> Signed-off-by: Yixian Liu <liuyixian@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-10RDMA/hns: Set se attribute of sqwqe in hip08oulijun
When send flags is IB_SEND_SOLICITED, the se(solicated event) field of sqwqe will be set. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Shaobo Xu <xushaobo2@huawei.com> Signed-off-by: Yixian Liu <liuyixian@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-10RDMA/hns: Configure fence attribute in hip08 RoCEoulijun
When post wr for mixed rdma operation, we need to use fence mechanism to keep the correct execute order. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Shaobo Xu <xushaobo2@huawei.com> Signed-off-by: Yixian Liu <liuyixian@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-10RDMA/hns: Configure TRRL field in hip08 RoCE deviceoulijun
The TRRL(Target RDMA Read/aTOMIC List) record the information of receiving RDMA READ or ATOMIC operation in hip08. It will be used the hardware. The driver need to assign a continuous physical address for trrl_ba field of qp context. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Shaobo Xu <xushaobo2@huawei.com> Signed-off-by: Yixian Liu <liuyixian@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-10RDMA/hns: Update calculation of irrl_ba field for hip08oulijun
The irrl(initiator RDMA Read/Atomic list) base address of qp context is assigned for addr[63:6]. This patch mainly fixed it. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Shaobo Xu <xushaobo2@huawei.com> Signed-off-by: Yixian Liu <liuyixian@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-10RDMA/hns: Configure sgid type for hip08 RoCEWei Hu(Xavier)
The hardware vendors need to generate RoCEv1 or RoCEv2 packet according to the sgid type configured. Besides, update the gid table size for hip08 RoCE device. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Shaobo Xu <xushaobo2@huawei.com> Signed-off-by: Yixian Liu <liuyixian@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-10RDMA/hns: Generate gid type of RoCEv2Wei Hu(Xavier)
HNS_ROCE_CAP_FALG_ROCE_V1_V2 is added for selecting capability of RoCE in hns driver. When HNS_ROCE_CAP_FALG_ROCE_V1_V2 is set, driver will inform ib core that the related hns device can support RoCEv2, and ib core can generate the gid of the related type. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Shaobo Xu <xushaobo2@huawei.com> Signed-off-by: Yixian Liu <liuyixian@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-10RDMA/hns: Add rereg mr support for hip08Wei Hu(Xavier)
This patch adds rereg mr support for hip08. Signed-off-by: Shaobo Xu <xushaobo2@huawei.com> Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Yixian Liu <liuyixian@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-07IB/hfi1: convert to debugfs_file_get() and -put()Nicolai Stange
Convert all calls to the now obsolete debugfs_use_file_start() and debugfs_use_file_finish() to the new debugfs_file_get() and debugfs_file_put() API. Fixes: 49d200deaa68 ("debugfs: prevent access to removed files' private data") Signed-off-by: Nicolai Stange <nicstange@gmail.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-07Merge branch 'linus' into locking/core, to resolve conflictsIngo Molnar
Conflicts: include/linux/compiler-clang.h include/linux/compiler-gcc.h include/linux/compiler-intel.h include/uapi/linux/stddef.h Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Files removed in 'net-next' had their license header updated in 'net'. We take the remove from 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02Merge tag 'spdx_identifiers-4.14-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull initial SPDX identifiers from Greg KH: "License cleanup: add SPDX license identifiers to some files Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: License cleanup: add SPDX license identifier to uapi header files with a license License cleanup: add SPDX license identifier to uapi header files with no license License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Smooth Cong Wang's bug fix into 'net-next'. Basically put the bulk of the tcf_block_put() logic from 'net' into tcf_block_put_ext(), but after the offload unbind. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01Merge branch 'k.o/for-rc' into k.o/for-nextDoug Ledford
Pick up the missing netlink oops fix Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-31RDMA/nldev: Enforce device index check for port callbackLeon Romanovsky
IB device index is nldev's handler and it should be checked always. Fixes: c3f66f7b0052 ("RDMA/netlink: Implement nldev port doit callback") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Doug Ledford <dledford@redhat.com> [ Applying directly, since Doug fried his SSD's and is rebuilding - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-31treewide: Fix function prototypes for module_param_call()Kees Cook
Several function prototypes for the set/get functions defined by module_param_call() have a slightly wrong argument types. This fixes those in an effort to clean up the calls when running under type-enforced compiler instrumentation for CFI. This is the result of running the following semantic patch: @match_module_param_call_function@ declarer name module_param_call; identifier _name, _set_func, _get_func; expression _arg, _mode; @@ module_param_call(_name, _set_func, _get_func, _arg, _mode); @fix_set_prototype depends on match_module_param_call_function@ identifier match_module_param_call_function._set_func; identifier _val, _param; type _val_type, _param_type; @@ int _set_func( -_val_type _val +const char * _val , -_param_type _param +const struct kernel_param * _param ) { ... } @fix_get_prototype depends on match_module_param_call_function@ identifier match_module_param_call_function._get_func; identifier _val, _param; type _val_type, _param_type; @@ int _get_func( -_val_type _val +char * _val , -_param_type _param +const struct kernel_param * _param ) { ... } Two additional by-hand changes are included for places where the above Coccinelle script didn't notice them: drivers/platform/x86/thinkpad_acpi.c fs/lockd/svc.c Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2017-10-30IB/hfi1: Take advantage of kvzalloc_node in sdma initializationMike Marciniszyn
The code that allocates the tx ring in the sdma code fails to take advantage of kvzalloc variations. Fix by converting to use kvzalloc_node. Reported-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-30IB/hfi1: Don't modify num_user_contexts module parameterKamenee Arumugam
The driver parameter num_user_contexts controls global behavior and should not be modified by the driver. This patch eliminates modification of num_user_contexts by using a local variable to keep track of the value. Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-30IB/hfi1: Insure int mask for in-kernel receive contexts is clearMike Marciniszyn
The only use for the urg interrupt is for priority PSM packets. There is no reason for this interrupt to be enabled for kernel contexts. Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-30IB/hfi1: Add tx_opcode_stats like the opcode_statsMike Marciniszyn
This patch adds tx_opcode_stats to parallel the (rx)opcode_stats in the debugfs. Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-30IB/hfi1: Validate PKEY for incoming GSI MAD packetsSebastian Sanchez
These are the use-cases where the pkey needs to be tested to see if a packet needs to be dropped. a) Check if pkey is not FULL_MGMT_P_KEY or LIM_MGMT_P_KEY, drop the packet as it's not part of the management partition. Self-originated packets are an exception. b) If pkey index points to FULL_MGMT_P_KEY and LIM_MGMT_P_KEY is in the table, the packet is coming from a management node, and the receiving node is also a management node, so it is safe for the packet to go through. c) If pkey index points to FULL_MGMT_P_KEY and LIM_MGMT_P_KEY is NOT in the table, drop the packet as LIM_MGMT_P_KEY should always be in the pkey table. It could be a misconfiguration. d) If pkey index points to LIM_MGMT_P_KEY and FULL_MGMT_P_KEY is NOT in the table, it is safe for the packet to go through since a non-management node is talking to another non-managment node. e) If pkey index points to LIM_MGMT_P_KEY and FULL_MGMT_P_KEY is in the table, drop the packet because a non-management node is talking to a management node, and it could be an attack. For the implementation, these rules can be simplied to only checking for (a) and (e). There's no need to check for rule (b) as the packet doesn't need to be dropped. Rule (c) is not possible in the driver as LIM_MGMT_P_KEY is always in the pkey table. Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-30Ib/hfi1: Return actual operational VLs in port info queryPatel Jay P
__subn_get_opa_portinfo stores value returned by hfi1_get_ib_cfg() as operational vls. hfi1_get_ib_cfg() returns vls_operational field in hfi1_pportdata. The problem with this is that the value is always equal to vls_supported field in hfi1_pportdata. The logic to calculate operational_vls is to set value passed by FM (in __subn_set_opa_portinfo routine). If no value is passed then default value is stored in operational_vls. Field actual_vls_operational is calculated on the basis of buffer control table. Hence, modifying hfi1_get_ib_cfg() to return actual_operational_vls when used with HFI1_IB_CFG_OP_VLS parameter Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Patel Jay P <jay.p.patel@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-30IB/hfi1: Race condition between user notification and driver stateMichael J. Ruhl
The handler for link init state (HLS_UP_INIT) notifies userspace (update_statusp()) before enabling the device (RCV_CTRL_RCV_PORT_ENABLE_SMASK) or setting the device state (ppd->host_link_state). This causes a race condition where the userspace thinks the interface is in the INIT state before the driver has set that state. Rework the code path to eliminate the race. Delay setting the init state until after a HW settling period. Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Several conflicts here. NFP driver bug fix adding nfp_netdev_is_nfp_repr() check to nfp_fl_output() needed some adjustments because the code block is in an else block now. Parallel additions to net/pkt_cls.h and net/sch_generic.h A bug fix in __tcp_retransmit_skb() conflicted with some of the rbtree changes in net-next. The tc action RCU callback fixes in 'net' had some overlap with some of the recent tcf_block reworking. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-25bnxt_re: Implement the shutdown hook of the L2-RoCE driver interfaceSomnath Kotur
When host is shutting down, it invokes the shutdown hook of the L2 driver where it would attempt to free the MSI-X vectors, but would fail because some vectors are held by the RoCE driver. Implement the new hook in the L2 -> RoCE interface which will be invoked so that the RoCE driver can unregister the device and free up the MSI-X vectors it had claimed so that L2 can proceed with it's shutdown without failure. Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-25RDMA/cxgb4: Declare stag as __be32Leon Romanovsky
The scqe.stag is actually __b32, fix it. drivers/infiniband/hw/cxgb4/cq.c:754:52: warning: cast to restricted __be32 Cc: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
generated by cgit (git 2.34.1) at 2024-06-08 06:14:52 +0000